[ Upstream commit 63c072e293 ]
On SM8250 (IRIS2) with firmware older than 1.0.087, the firmware could
not handle a dummy device address for EOS buffers, so a NULL device
address is sent instead. The existing check used IS_V6() alongside a
firmware version gate:
if (IS_V6(core) && is_fw_rev_or_older(core, 1, 0, 87))
fdata.device_addr = 0;
else
fdata.device_addr = 0xdeadb000;
However, SC7280 which is also V6, uses a firmware string of the form
"1.0.<commit-hash>", which the version parser translates to 1.0.0. This
unintentionally satisfies the `is_fw_rev_or_older(..., 1, 0, 87)`
condition on SC7280. Combined with IS_V6() matching there as well, the
quirk is incorrectly applied to SC7280, causing VP9 decode failures.
Constrain the check to IRIS2 (SM8250) only, which is the only platform
that needed this quirk, by replacing IS_V6() with IS_IRIS2(). This
restores correct behavior on SC7280 (no forced NULL EOS buffer address).
Fixes: 47f867cb1b ("media: venus: fix EOS handling in decoder stop command")
Cc: stable@vger.kernel.org
Reported-by: Mecid <mecid@mecomediagroup.de>
Closes: https://github.com/qualcomm-linux/kernel-topics/issues/222
Co-developed-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93ecd6ee95 ]
When hfi_session_flush is issued, all queued buffers are returned to
the V4L2 driver. Some of these buffers are not processed and have
bytesused = 0. Currently, the driver marks such buffers as error even
during drain operations, which can incorrectly flag EOS buffers.
Only capture buffers with zero payload (and not EOS) should be marked
with VB2_BUF_STATE_ERROR. The check is performed inside the non-EOS
branch to ensure correct handling.
Fixes: 51df3c81ba ("media: venus: vdec: Mark flushed buffers with error state")
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83c10e8dd4 ]
The "unstriped" device-mapper target incorrectly calculates the sector
offset on the mapped device when the target's origin is not zero.
Take for example this hypothetical concatenation of the members of a
two-disk RAID0:
linearized: 0 2097152 unstriped 2 128 0 /dev/md/raid0 0
linearized: 2097152 2097152 unstriped 2 128 1 /dev/md/raid0 0
The intent in this example is to create a single device named
/dev/mapper/linearized that comprises all of the chunks of the first disk
of the RAID0 set, followed by all of the chunks of the second disk of the
RAID0 set.
This fails because dm-unstripe.c's map_to_core function does its
computations based on the sector number within the mapper device rather
than the sector number within the target. The bug turns invisible when
the target's origin is at sector zero of the mapper device, as is the
common case. In the example above, however, what happens is that the
first half of the mapper device gets mapped correctly to the first disk
of the RAID0, but the second half of the mapper device gets mapped past
the end of the RAID0 device, and accesses to any of those sectors return
errors.
Signed-off-by: Matt Whitlock <kernel@mattwhitlock.name>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 18a5bf2705 ("dm: add unstriped target")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 118ba36e44 ]
There's a logic quirk in the handling of suspend in the bitmap mode:
This is the sequence of calls if we are reloading a dm-integrity table:
* dm_integrity_ctr reads a superblock with the flag SB_FLAG_DIRTY_BITMAP
set.
* dm_integrity_postsuspend initializes a journal and clears the flag
SB_FLAG_DIRTY_BITMAP.
* dm_integrity_resume sees the superblock with SB_FLAG_DIRTY_BITMAP set -
thus it interprets the journal as if it were a bitmap.
This quirk causes recalculation problem if the user increases the size of
the device in the bitmap mode.
Fix this by reading a fresh copy on the superblock in
dm_integrity_resume. This commit also fixes another logic quirk - the
branch that sets bitmap bits if the device was extended should only be
executed if the flag SB_FLAG_DIRTY_BITMAP is set.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Ondrej Kozina <okozina@redhat.com>
Fixes: 468dfca38b ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16de4c6a8f ]
This is a special device that's created dynamically and is supposed to
stay in memory forever. We also currently don't have a devlink between
it and the actual reset consumer. Suppress sysfs bind attributes so that
user-space can't unbind the device because - as of now - it will cause a
use-after-free splat from any user that puts the reset control handle.
Fixes: cee544a40e ("reset: gpio: Add GPIO-based reset controller")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84d875e698 ]
On s390 PCI busses and slots with multiple functions may have holes
because PCI functions are passed-through by the hypervisor on a per
function basis and some functions may be in standby or reserved. This
fact is indicated by returning true from the
hypervisor_isolated_pci_functions() helper and triggers common code to
scan all possible devfn values. Via pci_scan_single_device() this in
turn causes config reads for the device and vendor IDs, even for PCI
functions which are in standby and thereofore disabled.
So far these futile config reads, as well as potentially writes, which
can never succeed were handled by the PCI load/store instructions
themselves. This works as the platform just returns an error for
a disabled and thus not usable function handle. It does cause spamming
of error logs and additional overhead though.
Instead check if the used function handle is enabled in zpci_cfg_load()
and zpci_cfg_write() and if not enable directly return -ENODEV. Also
refactor zpci_cfg_load() and zpci_cfg_store() slightly to accommodate
the new logic while meeting modern kernel style guidelines.
Cc: stable@vger.kernel.org
Fixes: a50297cf82 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91848c99ed ]
Digital gain wraps-around at the maximum of 16838 / 0x3fff.
Fix the maximum digital gain by setting it to 0x3fff.
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 222f1279ed ]
Ensure that there are no pending interrupts after we have stopped the
pipeline. Indeed, it could happen that new interrupt has been generated
during the stop_streaming processing hence clear them in order to avoid
getting a new interrupt right from the start of a next start_streaming.
Fixes: 28e0f37722 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75fb63ae03 ]
Currently, only the first matched node will be handled. This leads
to jtag switching broken for RK3576, as rk3576-sys-grf is found before
rk3576-ioc-grf. Change the code to scan all the possible node to fix
the problem.
Fixes: e1aaecacfa ("soc: rockchip: grf: Add rk3576 default GRF values")
Cc: stable@vger.kernel.org
Cc: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Marco Schirrmeister <mschirrmeister@gmail.com>
Link: https://patch.msgid.link/1768524932-163929-3-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef9b3b4dbe ]
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,nco" anymore [1]. Use
"apple,t8103-nco" as base compatible as it is the SoC the driver and
bindings were written for.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Fixes: 6641057d5d ("clk: clk-apple-nco: Add driver for Apple NCO")
Cc: stable@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eb63e9bb6 ]
Since commit c6e126de43 ("of: Keep track of populated platform
devices") child devices will not be created by of_platform_populate()
if the devices had previously been deregistered individually so that the
OF_POPULATED flag is still set in the corresponding OF nodes.
Switch to using of_platform_depopulate() instead of open coding so that
the child devices are created if the driver is rebound.
Fixes: c6e126de43 ("of: Keep track of populated platform devices")
Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251219110119.23507-1-johan@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 127ccae2c1 ]
Commit cc3ed80ae6 ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB.
Fixes: cc3ed80ae6 ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260110004821.3411245-2-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80db65d4ac ]
In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly
calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np)
on the error path. However, after the devm_add_action_or_reset()
returns, the of_node_put(clk_mux_np) is called again, causing a double
free.
Fix by returning directly, to avoid the duplicate of_node_put().
Fixes: ba59c9b43c ("soc: ti: pruss: support CORECLK_MUX and IEPCLK_MUX")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260113014716.2464741-1-vulab@iscas.ac.cn
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c933138d45 ]
The mmio regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: a5caf03188 ("soc: ti: k3-socinfo: Do not use syscon helper to build regmap")
Cc: stable@vger.kernel.org # 6.15
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20251127134942.2121-1-johan@kernel.org
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb8a6c18fb ]
Stale rq->bio values have been observed to cause double-initialization of
cloned bios in request-based device-mapper targets, leading to
use-after-free and double-free scenarios.
One such case occurs when using dm-multipath on top of a PCIe NVMe
namespace, where cloned request bios are freed during
blk_complete_request(), but rq->bio is left intact. Subsequent clone
teardown then attempts to free the same bios again via
blk_rq_unprep_clone().
The resulting double-free path looks like:
nvme_pci_complete_batch()
nvme_complete_batch()
blk_mq_end_request_batch()
blk_complete_request() // called on a DM clone request
bio_endio() // first free of all clone bios
...
rq->end_io() // end_clone_request()
dm_complete_request(tio->orig)
dm_softirq_done()
dm_done()
dm_end_request()
blk_rq_unprep_clone() // second free of clone bios
Fix this by clearing the clone request's bio pointer when the last cloned
bio completes, ensuring that later teardown paths do not attempt to free
already-released bios.
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c698b7f417 ]
If we send a write followed by a discard, it may be possible that the
discarded data end up being overwritten by the previous write from the
journal. The code tries to prevent that, but there was a typo in this
logic that made it not being activated as it should be.
Note that if we end up here the second time (when discard_retried is
true), it means that the write bio is actually racing with the discard
bio, and in this situation it is not specified which of them should win.
Cc: stable@vger.kernel.org
Fixes: 31843edab7 ("dm integrity: improve discard in journal mode")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6099f78e4c ]
Several error paths in ipu6_pci_probe() were jumping directly to
out_ipu6_bus_del_devices without releasing the runtime PM reference.
Add pm_runtime_put_sync() before cleaning up other resources.
Cc: Stable@vger.kernel.org
Fixes: 25fedc0219 ("media: intel/ipu6: add Intel IPU6 PCI device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e0fcc9127 ]
Fix two coding errors in ipu6-mmu.c:
1. Fix syntax error in page_table_dump() where the closing parenthesis
and semicolon were swapped in the TBL_PHYS_ADDR macro call.
2. Fix incorrect loop bound in alloc_l2_pt(). When initializing L2 page
table entries, the loop was incorrectly using ISP_L1PT_PTES instead
of ISP_L2PT_PTES.
Fixes: 9163d83573 ("media: intel/ipu6: add IPU6 DMA mapping API and MMU table")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 973e42fd5d ]
__v4l2_ctrl_handler_setup() and __v4l2_ctrl_modify_range() contains an
assertion to verify that the v4l2_ctrl_handler::lock is held, as it should
only be called when the lock has already been acquired. Therefore use our
own mutex for the ctrl lock, otherwise a warning will be reported.
Fixes: 4974c2f19f ("media: ov5647: Support gain, exposure and AWB controls")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
[Sakari Ailus: Fix a minor conflict.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31e5191aa1 ]
Fix setting sub-device state for non-source sub-devices.
Fixes: 5755be5f15 ("media: v4l2-subdev: Rename .init_cfg() operation to .init_state()")
Cc: stable@vger.kernel.org # for v6.8 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c063632b49 ]
The pixel rate for VGA (640x480) mode is configured in the mode's table
to be 58.333 MPix/s instead of 55 MPix/s, so fix it.
Fixes: 911f4516ee ("media: ov5647: Support V4L2_CID_PIXEL_RATE")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CAPY8ntA2TCf9FuB6Nk%2BOn%2By6N_PMuYPAOAr3Yx8YESwe4skWvw@mail.gmail.com/
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f007586b1e ]
As this sensor captures RAW bayer frames, the colorspace should be
V4L2_COLORSPACE_RAW instead of SRGB.
Fixes: a8df5af695 ("media: ov5647: Add SGGBR10_1X10 modes")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1438248c5a ]
Trial and error reveals that the minimum vblank value appears to be 24
(the OV5647 data sheet does not give any clues). This fixes streaming
lock-ups in full resolution mode.
Fixes: 2512c06441 ("media: ov5647: Support V4L2_CID_VBLANK control")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4e62e597f ]
The top offset in the pixel array is actually 6 (see page 3-1 of the
OV5647 data sheet).
Fixes: 14f70a3232 ("media: ov5647: Add support for get_selection()")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eee13cbcca ]
In ov5647_init_controls() we call v4l2_get_subdevdata, but it is
initialized by v4l2_i2c_subdev_init() in the probe, which currently
happens after init_controls(). This can result in a segfault if the
error condition is hit, and we try to access i2c_client, so fix the
order.
Fixes: 4974c2f19f ("media: ov5647: Support gain, exposure and AWB controls")
Cc: stable@vger.kernel.org
Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 679f0b7b6a ]
Calculating maximum M for scaler configuration involves dividing by
MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably
non-zero, the driver was missing the check it in fact was. Fix this.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Closes: https://lore.kernel.org/all/ahukd6b3wonye3zgtptvwzvrxldcruazs2exfvll6etjhmcxyj@vq3eh6pd375b/
Fixes: ccfc97bdb5 ("[media] smiapp: Add driver")
Cc: stable@vger.kernel.org # for 5.15 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d965919af5 ]
vfe_isr() iterates using MSM_VFE_IMAGE_MASTERS_NUM(7) as the loop
bound and passes the index to vfe_isr_reg_update(). However,
vfe->line[] array is defined with VFE_LINE_NUM_MAX(4):
struct vfe_line line[VFE_LINE_NUM_MAX];
When index is 4, 5, 6, the access to vfe->line[line_id] exceeds
the array bounds and resulting in out-of-bounds memory access.
Fix this by using separate loops for output lines and write masters.
Fixes: 4edc8eae71 ("media: camss: Add initial support for VFE hardware version Titan 480")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 409fb57c1b ]
When the test-pattern control gets set to 0 (Disabled) 0 should be written
to the test-pattern register, rather then doing nothing.
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8563a375e ]
The 2 argument version of v4l2_subdev_state_get_format() takes the pad
as second argument, not the stream.
Fixes: bc0e8d91fe ("media: v4l: subdev: Switch to stream-aware state functions")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 109e0feaca ]
A analogue maximum gain of 0xffff / 65525 seems unlikely and testing
indeed shows that the gain control wraps-around at 16383, so set the
maximum gain to 0x3fff / 16383.
The minimum gain of 0x100 is correct. Setting bits 8-11 to 0x0 results
in the same gain values as setting these bits to 0x1, with bits 0-7
still increasing the gain when going from 0x000 - 0x0ff in the exact
same range as when going from 0x100 - 0x1ff.
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
[Sakari Ailus: mention analogue gain and update the limit from 4096.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c632eebf6 ]
CSI lanes are double-clocked so with a single lane at 400MHZ the resulting
pixel-rate for 10-bits pixels is 400 MHz * 2 / 10 = 80 MHz, not 40 MHz.
This also matches with the observed frame-rate of 60 fps with the default
vblank setting: 80000000 / (1488 * 896) = 60.
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ada20c3db0 ]
During sensor calibration I noticed that with the hflip control set
to false/disabled the image was mirrored.
So it seems that the horizontal flip control is inverted and needs to
be set to 1 to not flip (just like the similar problem recently fixed
on the ov08x40 sensor).
Invert the hflip control to fix the sensor mirroring by default.
As the comment above the newly added OV01A10_MEDIA_BUS_FMT define explains
the control being inverted also means that the native Bayer-order of
the sensor actually is GBRG not BGGR, but so as to not break userspace
the Bayer-order is kept at BGGR.
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cad237b6c8 ]
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
Cc: stable@vger.kernel.org
Fixes: a000e9a02b ("[media] tw9906: add Techwell tw9906 video decoder")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cea16fea4 ]
In one of the error paths in tw9903_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
Cc: stable@vger.kernel.org
Fixes: 0890ec19c6 ("[media] tw9903: add new tw9903 video decoder")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 863f50d583 ]
In error path, add cx25821_alsa_dma_unmap() to release the
resource acquired by cx25821_alsa_dma_map()
Fixes: 8d8e6d6005 ("[media] cx28521: drop videobuf abuse in cx25821-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 141c81849f ]
In error path, add cx23885_alsa_dma_unmap() to release the
resource acquired by cx23885_alsa_dma_map().
Fixes: 9529a4b0cf ("[media] cx23885: drop videobuf abuse in cx23885-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8bf939d77 ]
Fix a memory leak in usb_keene_probe(). The v4l2 control handler is
initialized and controls are added, but if v4l2_device_register() or
video_register_device() fails afterward, the handler was never freed,
leaking memory.
Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure
the control handler is properly freed for all error paths after it is
initialized.
Reported-by: syzbot+a41b73dce23962a74c72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a41b73dce23962a74c72
Fixes: 1bf20c3a0c ("[media] radio-keene: add a driver for the Keene FM Transmitter")
Cc: stable@vger.kernel.org
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c1b79f40e ]
Intra_only frame could be considered as a key frame so Instantaneous
Decoding Refresh (IDR) flag must be set of the both case and not only
for key frames.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reported-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Fixes: 727a400686 ("media: verisilicon: Add Rockchip AV1 decoder")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81f8e0e6a2 ]
rga_get_frame() can return ERR_PTR(-EINVAL) when buffer type is
unsupported or invalid. rga_buf_init() does not check the return value
and unconditionally dereferences the pointer when accessing f->size.
Add proper ERR_PTR checking and return the error to prevent
dereferencing an invalid pointer.
Fixes: 6040702ade ("media: rockchip: rga: allocate DMA descriptors per buffer")
Cc: stable@vger.kernel.org
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5633ec763a ]
The min_queued_buffers field controls when start_streaming() is called
by the vb2 core (it delays the callback until at least N buffers are
queued). Setting it to 1 affects the timing of start_streaming(), which
breaks the seek flow in decoder scenarios and causes test failures.
The current driver implementation does not rely on this minimum buffer
requirement and handles streaming start correctly with the default
value of 0, so remove these assignments.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e4e729325 ]
Add the display controller and DPTX phy power-domains to the framebuffer
node to keep the framebuffer and display out working after device probing
finished.
The OS has more control about the display pipeline used for the HDMI
output on M2 based devices. The HDMI output is driven by an integrated
DisplayPort to HDMI converter (Parade PS190). The DPTX phy is now
controlled by the OS and no longer by firmware running on the display
co-processor. This allows using the second display controller on the
second USB type-c port or tunneling 2 DisplayPort connections over
USB4/Thunderbolt.
The m1n1 bootloader uses the second display controller to drive the HDMI
output. Adjust for this difference compared to the notebooks as well.
Fixes: 2d5ce3fbef ("arm64: dts: apple: t8112: Initial t8112 (M2) device trees")
Cc: stable@vger.kernel.org
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260108-apple-dt-pmgr-fixes-v1-1-cfdce629c0a8@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1547d41f9f ]
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cee8337e1b ]
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
