[ Upstream commit 966f04a89d ]
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.
Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"
Fixes: 6257dfc1c4 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ee0ef38aa ]
Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.
Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"
Fixes: 6257dfc1c4 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c46e9b6cc9 ]
Use STM32 ADC generic bindings instead of legacy bindings on
emtrion GmbH Argon boards.
The STM32 ADC specific binding to declare channels has been deprecated,
hence adopt the generic IIO channels bindings, instead.
The STM32MP151 device tree now exposes internal channels using the
generic binding. This makes the change mandatory here to avoid a mixed
use of legacy and generic binding, which is not supported by the driver.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Stable-dep-of: 0ee0ef38aa ("ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 435a73d737 ]
The commit b2de431360 ("arm64: dts: qcom: pmk8350: Add peripherals for
pmk8350") for the ADC TM (thermal monitoring device) have used the
compatible string from the vendor kernel ("qcom,adc-tm7"). Use the
proper compatible string that is defined in the upstream kernel
("qcom,spmi-adc-tm5-gen2").
Fixes: b2de431360 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99f8cf491d ]
The name of the thermal zone in pmr735b.dtsi (pmr735a-thermal) conflicts
with the thermal zone in pmr735a.dtsi. Rename the thermal zone according
to the chip name.
Fixes: 6f3426b3de ("arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aad41d9e6c ]
The name of the thermal zone in pm8350b.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.
Fixes: 5c1399299d ("arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64f19c06f7 ]
The name of the thermal zone in pm8350.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.
Fixes: 7a79b95f42 ("arm64: dts: qcom: pm8350: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91ce3693e2 ]
The present values look to have been copypasted from 8150 or 8180.
Fix that.
Fixes: 07ddb30281 ("arm64: dts: qcom: sm8350: Add CPU topology and idle-states")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-2-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9acc60c3e2 ]
UART6 is used for debug (routed via uSD pins) and UART9 is connected
to the bluetooth chip.
Set indexed aliases to make the GENI UART driver happy and route serial
traffic through the debug uart by default.
Fixes: 30a7f99bef ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230627-topic-tama_uart-v1-1-0fa790248db8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36541089c4 ]
The interrupt line was previously not described. Take care of that.
Fixes: 1e39255ed2 ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-11-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a422c6a91a ]
Set up the corresponding GPIOs properly and add the leftover hardware
buttons to mark this piece of the puzzle complete.
Fixes: 46e14907c7 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-4-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b8a633507 ]
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX203&206 DTSIs to better document the hardware.
Diff between 203 and 206:
pm8009_gpios
< "CAM_PWR_LD_EN",
> "NC",
pm8150_gpios
< "NC",
> "G_ASSIST_N",
< "WLC_EN_N", /* GPIO_10 */
> "NC", /* GPIO_10 */
Which is due to 5 II having an additional Google Assistant hardware
button and 1 II having a wireless charger & different camera wiring
to accommodate the additional 3D iToF sensor.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-2-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: a422c6a91a ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40b398beab ]
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX203&206 DTSIs to better document the hardware.
Diff between 203 and 206:
< "CAM_PWR_A_CS",
> "FRONTC_PWR_EN",
< "CAM4_MCLK",
< "TOF_RST_N",
> "NC",
> "NC",
< "WLC_I2C_SDA",
< "WLC_I2C_SCL", /* GPIO_120 */
> "NC",
> "NC",
< "WLC_INT_N",
> "NC",
Which makes sense, as 203 has a 3D iToF, slightly different camera
power wiring and WLC (WireLess Charging).
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-1-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: a422c6a91a ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 775a5283c2 ]
sm8250 faces the same problem with its Energy Model as sdm845. The energy
cost of LITTLE cores is reported to be higher than medium or big cores
EM computes the energy with formula:
energy = OPP's cost / maximum cpu capacity * utilization
On v6.4-rc6 we have:
max capacity of CPU0 = 284
capacity of CPU0's OPP(1612800 Hz) = 253
cost of CPU0's OPP(1612800 Hz) = 191704
max capacity of CPU4 = 871
capacity of CPU4's OPP(710400 Hz) = 255
cost of CPU4's OPP(710400 Hz) = 343217
Both OPPs have almost the same compute capacity but the estimated energy
per unit of utilization will be estimated to:
energy CPU0 = 191704 / 284 * 1 = 675
energy CPU4 = 343217 / 871 * 1 = 394
EM estimates that little CPU0 will consume 71% more than medium CPU4 for
the same compute capacity. According to [1], little consumes 25% less than
medium core for Coremark benchmark at those OPPs for the same duration.
Set the dynamic-power-coefficient of CPU0-3 to 105 to fix the energy model
for little CPUs.
[1] https://github.com/kdrag0n/freqbench/tree/master/results/sm8250/k30s
Fixes: 6aabed5526 ("arm64: dts: qcom: sm8250: Add CPU capacities and energy model")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230615154852.130076-1-vincent.guittot@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44bcded2be ]
The previous ZAP region definition was wrong. Fix it.
Note this is not a device-specific fixup, but a fixup to the generic
PIL load address.
Fixes: 5f82b9cda6 ("arm64: dts: qcom: Add SM6350 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-6-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc015a3a6d ]
The commit 8f680c2874 ("arm64: defconfig: Switch msm8996 clk drivers
to module") switched CONFIG_MSM_MMCC_8996 to module, which also resulted
in CONFIG_MSM_GCC_8996 being switched to module. This breaks useful
bootflow for Qualcomm MSM8996 / APQ8096 platforms, because the serial is
not enabled anymore until the GCC module is loaded.
Reported-by: Rob Clark <robdclark@gmail.com>
Fixes: 8f680c2874 ("arm64: defconfig: Switch msm8996 clk drivers to module")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230619125404.562137-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7b484b1c9 ]
Since we're using these two macros to read a value from a register, we
need to use the FIELD_GET instead of the FIELD_PREP macro, otherwise
we're getting wrong values.
So instead of:
[ 3.111779] ocmem fdd00000.sram: 2 ports, 1 regions, 512 macros, not interleaved
we now get the correct value of:
[ 3.129672] ocmem fdd00000.sram: 2 ports, 1 regions, 2 macros, not interleaved
Fixes: 88c1e9404f ("soc: qcom: add OCMEM driver")
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230506-msm8226-ocmem-v3-1-79da95a2581f@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e81a16e772 ]
It might be useful to know what hardware version of the OCMEM block the
SoC contains. Add a debug print for that.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-ocmem-hwver-v3-1-e51f3488e0f4@z3ntu.xyz
Stable-dep-of: a7b484b1c9 ("soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d1077cf2e ]
Fixes the following build errors on arm64:
drivers/video/fbdev/hyperv_fb.c: In function 'hvfb_getmem':
>> drivers/video/fbdev/hyperv_fb.c:1033:24: error: 'screen_info' undeclared (first use in this function)
1033 | base = screen_info.lfb_base;
| ^~~~~~~~~~~
drivers/video/fbdev/hyperv_fb.c:1033:24: note: each undeclared identifier is reported only once for each function it appears in
>> drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: error: 'screen_info' undeclared (first use in this function)
75 | drm_aperture_remove_conflicting_framebuffers(screen_info.lfb_base,
| ^~~~~~~~~~~
drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307090823.nxnT8Kk5-lkp@intel.com/
Fixes: 81d2393485 ("fbdev/hyperv-fb: Do not set struct fb_info.apertures")
Fixes: 8b0d13545b ("efi: Do not include <linux/screen_info.h> from EFI header")
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709100514.703759-1-suijingfeng@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e101bf95ea ]
[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.
[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.
This change expects that Freesync requests are blocked when
optimized_required is true.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dabc8b2075 ]
The dquot_mark_dquot_dirty() using dquot references from the inode
should be protected by dquot_srcu. quota_off code takes care to call
synchronize_srcu(&dquot_srcu) to not drop dquot references while they
are used by other users. But dquot_transfer() breaks this assumption.
We call dquot_transfer() to drop the last reference of dquot and add
it to free_dquots, but there may still be other users using the dquot
at this time, as shown in the function graph below:
cpu1 cpu2
_________________|_________________
wb_do_writeback CHOWN(1)
...
ext4_da_update_reserve_space
dquot_claim_block
...
dquot_mark_dquot_dirty // try to dirty old quota
test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE
if (test_bit(DQ_MOD_B, &dquot->dq_flags))
// test no dirty, wait dq_list_lock
...
dquot_transfer
__dquot_transfer
dqput_all(transfer_from) // rls old dquot
dqput // last dqput
dquot_release
clear_bit(DQ_ACTIVE_B, &dquot->dq_flags)
atomic_dec(&dquot->dq_count)
put_dquot_last(dquot)
list_add_tail(&dquot->dq_free, &free_dquots)
// add the dquot to free_dquots
if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags))
add dqi_dirty_list // add released dquot to dirty_list
This can cause various issues, such as dquot being destroyed by
dqcache_shrink_scan() after being added to free_dquots, which can trigger
a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots
and then to dirty_list, it is added to free_dquots again after
dquot_writeback_dquots() is executed, which causes the free_dquots list to
be corrupted and triggers a UAF when dqcache_shrink_scan() is called for
freeing dquot twice.
As Honza said, we need to fix dquot_transfer() to follow the guarantees
dquot_srcu should provide. But calling synchronize_srcu() directly from
dquot_transfer() is too expensive (and mostly unnecessary). So we add
dquot whose last reference should be dropped to the new global dquot
list releasing_dquots, and then queue work item which would call
synchronize_srcu() and after that perform the final cleanup of all the
dquots on releasing_dquots.
Fixes: 4580b30ea8 ("quota: Do not dirty bad dquots")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33bcfafc48 ]
Add new helper function dquot_active() to make the code more concise.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-4-libaokun1@huawei.com>
Stable-dep-of: dabc8b2075 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b9bdfa165 ]
Now we have a helper function dquot_dirty() to determine if dquot has
DQ_MOD_B bit. dquot_active() can easily be misunderstood as a helper
function to determine if dquot has DQ_ACTIVE_B bit. So we avoid this by
renaming it to inode_quota_active() and later on we will add the helper
function dquot_active() to determine if dquot has DQ_ACTIVE_B bit.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-3-libaokun1@huawei.com>
Stable-dep-of: dabc8b2075 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0241284778 ]
Refactor out dquot_write_dquot() to reduce duplicate code.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-2-libaokun1@huawei.com>
Stable-dep-of: dabc8b2075 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05aa613345 ]
Before this patch, booting to Linux VT and doing a simple:
echo 2 > /sys/class/graphics/fb0/blank
echo 0 > /sys/class/graphics/fb0/blank
would result in failures to re-enable the panel. Mode set callback is
called only once during boot in this scenario, while calls to
enable/disable callbacks are balanced afterwards. The driver doesn't
work unless userspace calls modeset before enabling the CRTC/connector.
This patch moves enabling of the DSI host from mode_set into pre_enable
callback, and removes some old hacks where this bridge driver is
directly calling into other bridge driver's callbacks.
pre_enable_prev_first flag is set on the panel's bridge so that panel
drivers will get their prepare function called between DSI host's
pre_enable and enable callbacks, so that they get a chance to
perform panel setup while DSI host is already enabled in command
mode. Otherwise panel's prepare would be called before DSI host
is enabled, and any DSI communication used in prepare callback
would fail.
With all these changes, the enable/disable sequence is now well
balanced, and host's and panel's callbacks are called in proper order
documented in the drm_panel API documentation without needing the old
hacks. (Mainly that panel->prepare is called when DSI host is ready to
allow the panel driver to send DSI commands and vice versa during
disable.)
Tested on Pinephone Pro. Trace of the callbacks follows.
Before:
[ 1.253882] dw-mipi-dsi-rockchip ff960000.dsi: mode_set
[ 1.290732] panel-himax-hx8394 ff960000.dsi.0: prepare
[ 1.475576] dw-mipi-dsi-rockchip ff960000.dsi: enable
[ 1.475593] panel-himax-hx8394 ff960000.dsi.0: enable
echo 2 > /sys/class/graphics/fb0/blank
[ 13.722799] panel-himax-hx8394 ff960000.dsi.0: disable
[ 13.774502] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[ 13.774526] panel-himax-hx8394 ff960000.dsi.0: unprepare
echo 0 > /sys/class/graphics/fb0/blank
[ 17.735796] panel-himax-hx8394 ff960000.dsi.0: prepare
[ 17.923522] dw-mipi-dsi-rockchip ff960000.dsi: enable
[ 17.923540] panel-himax-hx8394 ff960000.dsi.0: enable
[ 17.944330] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[ 17.944335] panel-himax-hx8394 ff960000.dsi.0: sending command 0xb9 failed: -110
[ 17.944340] panel-himax-hx8394 ff960000.dsi.0: Panel init sequence failed: -110
echo 2 > /sys/class/graphics/fb0/blank
[ 431.148583] panel-himax-hx8394 ff960000.dsi.0: disable
[ 431.169259] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[ 431.169268] panel-himax-hx8394 ff960000.dsi.0: Failed to enter sleep mode: -110
[ 431.169282] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[ 431.169316] panel-himax-hx8394 ff960000.dsi.0: unprepare
[ 431.169357] pclk_mipi_dsi0 already disabled
echo 0 > /sys/class/graphics/fb0/blank
[ 432.796851] panel-himax-hx8394 ff960000.dsi.0: prepare
[ 432.981537] dw-mipi-dsi-rockchip ff960000.dsi: enable
[ 432.981568] panel-himax-hx8394 ff960000.dsi.0: enable
[ 433.002290] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[ 433.002299] panel-himax-hx8394 ff960000.dsi.0: sending command 0xb9 failed: -110
[ 433.002312] panel-himax-hx8394 ff960000.dsi.0: Panel init sequence failed: -110
-----------------------------------------------------------------------
After:
[ 1.248372] dw-mipi-dsi-rockchip ff960000.dsi: mode_set
[ 1.248704] dw-mipi-dsi-rockchip ff960000.dsi: pre_enable
[ 1.285377] panel-himax-hx8394 ff960000.dsi.0: prepare
[ 1.468392] dw-mipi-dsi-rockchip ff960000.dsi: enable
[ 1.468421] panel-himax-hx8394 ff960000.dsi.0: enable
echo 2 > /sys/class/graphics/fb0/blank
[ 16.210357] panel-himax-hx8394 ff960000.dsi.0: disable
[ 16.261315] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[ 16.261339] panel-himax-hx8394 ff960000.dsi.0: unprepare
echo 0 > /sys/class/graphics/fb0/blank
[ 19.161453] dw-mipi-dsi-rockchip ff960000.dsi: pre_enable
[ 19.197869] panel-himax-hx8394 ff960000.dsi.0: prepare
[ 19.382141] dw-mipi-dsi-rockchip ff960000.dsi: enable
[ 19.382158] panel-himax-hx8394 ff960000.dsi.0: enable
(But depends on functionality intorduced in Linux 6.3, so this patch will
not build on older kernels when applied to older stable branches.)
Fixes: 46fc51546d ("drm/bridge/synopsys: Add MIPI DSI host controller bridge")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230617224915.1923630-1-megi@xff.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9e7c964ce ]
In converting to using the standard u16_fract type, commit [1] made the
obvious mistake and failed to take account of the difference in
numerator and denominator ordering, breaking all uses of the cs43130
codec.
Fix it.
[1] commit e14bd35ef4 ("ASoC: cs43130: Re-use generic struct u16_fract")
Fixes: e14bd35ef4 ("ASoC: cs43130: Re-use generic struct u16_fract")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230621153229.1944132-1-phil@raspberrypi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2222214749 ]
Modify the error handling flow by release lock.
The require mutex will keep holding if open fail.
Fixes: aa9ff6a495 ("ASoC: soc-compress: Reposition and add pcm_mutex")
Signed-off-by: yixuanjiang <yixuanjiang@google.com>
Link: https://lore.kernel.org/r/20230619033127.2522477-1-yixuanjiang@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f947be02a ]
The debug print parameters were swapped in the output and they were
printed as decimal values, both the hardware address and the value.
Update the debug print to print the parameters in correct order, and
use hexadecimal print for both address and value.
Fixes: f38b7cca6d ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615152817.359420-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ea064e74b ]
Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.
Fixes: 523847df1b ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-6-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 969cfd4c8c ]
Add a check that the wq exists before queuing up work for a
failed devcmd, as the PF is responsible for health and the VF
doesn't have a wq.
Fixes: c2dbb09043 ("pds_core: health timer and workqueue")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-5-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95e383226d ]
The VF doesn't need to send a reset command, and in a PCI reset
scenario it might not have a valid IO space to write to anyway.
Fixes: 523847df1b ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e48b894a1d ]
Make sure the health reporter is set up before we use it in
our devlink health updates, especially since the VF doesn't
set up the health reporter.
Fixes: 25b450c05a ("pds_core: add devlink health facilities")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91202ce78f ]
Don't access structs that have been cleared when in the fw_down
state and the various structs have been cleaned and are waiting
to recover. This caused a panic on rmmod when already in fw_down
and devlink_param_unregister() tried to check the parameters.
Fixes: 40ced89445 ("pds_core: devlink params for enabling VIF support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3d26c5702 ]
HFSC assumes that inner classes have an fsc curve, but it is currently
possible for classes without an fsc curve to become parents. This leads
to bugs including a use-after-free.
Don't allow non-root classes without HFSC_FSC to become parents.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230824084905.422-1-markovicbudimir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4413a20fa ]
Not all firmware variants support RSS filters. Do not fail all PTP
functionality when raw ethernet PTP filters fail to insert.
Fixes: e4616f6472 ("sfc: support PTP over Ethernet")
Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230824164657.42379-1-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 597d0ec0e4 ]
MAC (CGX or RPM) asserts backpressure at TL3 or TL2 node of the egress
hierarchical scheduler tree depending on link level config done. If
there are multiple PFC priorities enabled at a time and for all such
flows to backoff, each priority will have to assert backpressure at
different TL3/TL2 scheduler nodes and these flows will need to submit
egress pkts to these nodes.
Current PFC configuration has an issue where in only one backpressure
scheduler node is being allocated which is resulting in only one PFC
priority to work. This patch fixes this issue.
Fixes: 99c969a83d ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-4-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47bcc9c1cf ]
Suppose user has enabled pfc with prio 0,1 on a PF netdev(eth0)
dcb pfc set dev eth0 prio-pfc o:on 1:on
later user enabled pfc priorities 2 and 3 on the VF interface(eth1)
dcb pfc set dev eth1 prio-pfc 2:on 3:on
Instead of enabling pfc on all priorities (0..3), the driver only
enables on priorities 2,3. This patch corrects the issue by using
the proper CSR address.
Fixes: b9d0fedc62 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-3-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9ac2e1877 ]
During PFC TX schedulers free, flag TXSCHQ_FREE_ALL was being set
which caused free up all schedulers other than the PFC schedulers.
This patch fixes that to free only the PFC Tx schedulers.
Fixes: 99c969a83d ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-2-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b4b2ded9c ]
1. Upon txschq free request, the transmit schedular config in hardware
is not getting reset. This patch adds necessary changes to do the same.
2. Current implementation calls txschq alloc during interface
initialization and in response handler updates the default txschq array.
This creates a problem for htb offload where txsch alloc will be called
for every tc class. This patch addresses the issue by reading txschq
response in mbox caller function instead in the response handler.
3. Current otx2_txschq_stop routine tries to free all txschq nodes
allocated to the interface. This creates a problem for htb offload.
This patch introduces the otx2_txschq_free_one to free txschq in a
given level.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a9ac2e1877 ("octeontx2-pf: Fix PFC TX scheduler free")
Signed-off-by: Sasha Levin <sashal@kernel.org>
