Commit graph

1,427,121 commits

Author SHA1 Message Date
Arnd Bergmann
cce3c4db86 Renesas DTS updates for v7.1 (take two)
- Add DT overlay support for the MayQueen PixPaper display on the
     Yuridenki-Shokai Kakip board,
   - Add Ethernet PHY interrupt support for the RZ/T2H and RZ/N2H EVK
     boards,
   - Add SPI and PCIe support for the RZ/G3E SoC and the RZ/G3E SMARC EVK
     board,
   - Add DT overlay support for the WaveShare 13.3" 1920x1080 DSI
     Capacitive Touch Display and the Olimex MIPI-HDMI adapter on the
     Retronix Sparrow Hawk board,
   - Drop several superfluous C22 Ethernet PHY compatible strings,
   - Remove WDT nodes meant for other CPU cores on the RZ/V2N SoC,
   - Remove unavailable LVDS panel support for the Beacon ReneSoM base
     board,
   - Add initial support for the RZ/G3L (R9A08G046) SoC, and the RZ/G3L
     SMARC SoM and EVK boards,
   - Add Versa3 clock generator support for the RZ/V2H EVK development
     board,
   - Miscellaneous fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCacZTLQAKCRCKwlD9ZEnx
 cDFpAQCnjtuLDgdjwiwhiMAQlgnmPBPKsNYpIeiReu+e/thRdQD/Y7qqSkveLYKk
 Vess+HXdLKGSmbdMcVGHtt8XtCr0pAA=
 =+8Of
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnNU9oACgkQmmx57+YA
 GNmKzA/9FnSF6zEc1TeDT+8XPZGyoBfJ87aC6dqHb202g+RkegsHawxvELs825HZ
 tTgKVAQdfCyrIeUTf02Q+DY5ikZOFME+jt0I6VnASCilGRwoWIWK213sx4jrpfiv
 5bh66ZGAhz//qAUYBS5+bV6XSzWeVZ2cRTlQJ7sxndA2VpxqHtTvOD+cJF+52Q2R
 BReFQ35NIXP6r5GwMVUjcViYEagFJX72DsTkkYYHayhfUH95+4asOb7KWMblH8Lb
 ZmD7TFU6SRPvET3qaO8ZeVF2vbMtJ7PldN/vTDqr6Rp/LS9FAFCU7g2wAiTWfEMV
 R7yNdacSQBtKoD/LvcenAlk4slcDi//BX38jZfnPnfUso+MWJp3jJLqZxTsb/9FR
 IDCasye9hCCdBZ//m8HVM93oEmn5guvR3YyN2c4ZUir1eB9WnxOmpje/JRVm0N26
 xJKZ4JZe4h8hV+/b7oracmEGSXBeoLvANKNkgtFNduPh3+fEdDwSwjXR4E5EJuIf
 rBLb9rDrhTEIhZhjkUk0s85DstQ/t5OCnW7XDMNNPQwoROjMdcEHjotRV9yOR8wb
 4wz5OgEgwQeDGsszSmmZvvEHkpvRqcGaxcFfWBxILB9pFuhFbJGvWr5ridVpD6VW
 qkpUzc3lVLad1ytA/aEedlhZSHYHM/F8bhEVRuOUfH0NS2mbsrs=
 =Awz3
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dts-for-v7.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt

Renesas DTS updates for v7.1 (take two)

  - Add DT overlay support for the MayQueen PixPaper display on the
    Yuridenki-Shokai Kakip board,
  - Add Ethernet PHY interrupt support for the RZ/T2H and RZ/N2H EVK
    boards,
  - Add SPI and PCIe support for the RZ/G3E SoC and the RZ/G3E SMARC EVK
    board,
  - Add DT overlay support for the WaveShare 13.3" 1920x1080 DSI
    Capacitive Touch Display and the Olimex MIPI-HDMI adapter on the
    Retronix Sparrow Hawk board,
  - Drop several superfluous C22 Ethernet PHY compatible strings,
  - Remove WDT nodes meant for other CPU cores on the RZ/V2N SoC,
  - Remove unavailable LVDS panel support for the Beacon ReneSoM base
    board,
  - Add initial support for the RZ/G3L (R9A08G046) SoC, and the RZ/G3L
    SMARC SoM and EVK boards,
  - Add Versa3 clock generator support for the RZ/V2H EVK development
    board,
  - Miscellaneous fixes and improvements.

* tag 'renesas-dts-for-v7.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
  ARM: dts: renesas: Drop KSZ8041 PHY C22 compatible strings
  ARM: dts: renesas: rza2mevb: Drop RTL8201F PHY C22 compatible string
  ARM: dts: renesas: r8a7742-iwg21d-q7-dbcm-ca: Drop KSZ8081 PHY C22 compatible string
  arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board
  arm64: dts: renesas: renesas-smarc2: Move usb3 nodes to board DTS
  arm64: dts: renesas: Add initial support for RZ/G3L SMARC SoM
  arm64: dts: renesas: Add initial DTSI for RZ/G3L SoC
  arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add versa3 clock generator node
  dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3L SoC
  arm64: dts: renesas: beacon-renesom: Remove LVDS Panel
  ARM: dts: r9a06g032: Add #address-cells to the GIC node
  arm64: dts: renesas: r9a09g056: Remove wdt{0,2,3} nodes
  arm64: dts: renesas: sparrow-hawk: Add overlay for Olimex MIPI-HDMI adapter
  arm64: dts: renesas: r9a09g047e57-smarc: Enable PCIe
  arm64: dts: renesas: r9a09g047e57-smarc-som: Add PCIe reference clock
  arm64: dts: renesas: r9a09g047: Add PCIe node
  arm64: dts: renesas: Fix KSZ9131 PHY bogus txdv-skew-psec properties
  arm64: dts: renesas: Drop KSZ9131 PHY C22 compatible strings
  arm64: dts: renesas: Drop RTL8211F PHY C22 compatible strings
  arm64: dts: renesas: Drop RTL8211E PHY C22 compatible strings
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-04-01 19:20:18 +02:00
Arnd Bergmann
9e17f8e9cc STM32 DT for v7.1, round 1
Highlights:
 ----------
 
 - MPU:
   - STM32MP13:
     - Introduce and enable debug bus on DK board.
     - Enable Coresight on DK board.
     - Add DT overlays for DH board.
     - Add Wakeup capabilities on I2C nodes.
 
   - STMP32MP15:
     - ST:
       - Enable DCMI DMA chaining to improve performances.
       - Introduce and enable debug bus on EV and DK board.
       - Enable Coresight on EV and DK board.
 
     - DH:
       - Add DT overlays for DH board.
 
     - Phytec:
       - Rename "Phycore" to "phyboard-sargas" DT files and introduce
         SOM device tree file.
       - Fix and enhance current support.
 
   - STM32MP21:
     - Add Bsec support.
 
   - STM32MP23:
     - Add LTDC and LVDS support and enable display on STM32MP235F-DK
       board.
 
   - STM32MP25:
     - Enable display on STM32MP235F-DK board.
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAmnE9Z0dHGFsZXhhbmRy
 ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIWDeA//addNVtVQkDPaB+tk
 YTNFDdswdmqr23SFiw6Be8hGa2b/pkAS52Z97g9OAa9i4R2woaSTcMK8qWxMh4HD
 F2wqLyRuw5soe3UXwJJTOzKbpdGDBuAp2ATnfOcvXY4/+MeQhsciOW/H0FdrstwE
 oDjUFqhMDo2IRxeIeFLbJfC7U5ggvKMyyMy50v0OWmxcYbqklIxepVbX6zkDI1DG
 O9Tahm+IZ8Jg7A0bKS0DM6e3qmgJv/p508e1ibbnou9aCkFo6of+3ZRmWkYgM8JN
 EEIDz+UCvpiKEZbgD8L/oBJWMahe9iYDMdwE6uhcYHK5l0Kly281gc636Pmn72LB
 6Q5tAC4SgIy15pblltOKu6+gUFIovWJDrX12xKjmLoTRoNsO8wtwct8HtUmN7amS
 jEd0IDtlmKNkNFarxff76mJs5aupH0Sp1xz3nueF2O+S7Jt6oX+CG8Pt5b673Yaj
 mFWgp8Aixg3mR4snGAflWfXcEcSKt/bL8mXoQtaPWU5HTyfEgXAj8pARMy0vnNKx
 MlP47Kqbt3bfEYZcucCwQZUhDuGeExxW+9pVKaFG/B4Cm+65vKxQWaSEKxUdXoy6
 yTRfIOj0PQyj8sHKq0cbFut+zgrlZ0nOolPesy4BdG0P7P2jAFpBzdwh3MCGXBUT
 qTlpKOSRIi3+AnLjgUWagoSCDHo=
 =w3Nk
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnNTkYACgkQmmx57+YA
 GNmKcw/+LqfLmepgSArH7wZiQdgKfbPAY22kVWaOJ9ri9dKaee28NcKXKB4koVWo
 UvHRAK5K565KFt11gz8LqTijcY43EdB6b2Qi1NugVRGnAeapY5R08qnFbXkJk53K
 jwyavjEuczt+dXPO+9OXNNp6h1e+v7tWRZtme3hp0VWIYUDvg5itDfCSKs/OvuPi
 Vg06CVE65fOe/ETsriq0XQ8fMp3KF1ToHdV+EVmnCAmmFbp+1gyWrbWhNen/tcFC
 zEXGPu9Aae3GRHvH/R1E8zeZyz+vqIEw51dVMe4WueHYqSxnisNriMgRghLx8dQi
 BbuRSUT3nZwll9oSY9QfVljW96wViJmfG0/iUowWof74QFeZWvMGl5FIfH1SSJHb
 uV9Wm7V/6GD9HL2qvpyOEYZSlPxkIB8u5ttSLtev7oCQdCdWxdOAJ9APEt5j3OvJ
 48lwi3+0kNGBaUERjbdTBoLCHF42w6lVpZKnrcQOhwfN1c8KZcUhu/HWNmSE70qo
 WWsCTkUIWHaErUCwP+F4j5XX5OofCF1ZzJaibt9tjeVyURVsxU4BRbsGwwdZsYbX
 aQLhJ9uMR9sZPcBAV7B66GzIIonqKV2qHwc+G7pStcMSOUnDs4AvaAniNjaUG3rt
 czvWipVUlewN/GJPIf4rRj51TXaWVa2DycxWgZ6lqS+n33gj5WA=
 =G3bF
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v7.1, round 1

Highlights:
----------

- MPU:
  - STM32MP13:
    - Introduce and enable debug bus on DK board.
    - Enable Coresight on DK board.
    - Add DT overlays for DH board.
    - Add Wakeup capabilities on I2C nodes.

  - STMP32MP15:
    - ST:
      - Enable DCMI DMA chaining to improve performances.
      - Introduce and enable debug bus on EV and DK board.
      - Enable Coresight on EV and DK board.

    - DH:
      - Add DT overlays for DH board.

    - Phytec:
      - Rename "Phycore" to "phyboard-sargas" DT files and introduce
        SOM device tree file.
      - Fix and enhance current support.

  - STM32MP21:
    - Add Bsec support.

  - STM32MP23:
    - Add LTDC and LVDS support and enable display on STM32MP235F-DK
      board.

  - STM32MP25:
    - Enable display on STM32MP235F-DK board.

* tag 'stm32-dt-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (42 commits)
  arm64: defconfig: Enable STMicroelectronics STM32 display support
  arm64: dts: st: enable display support on stm32mp257f-dk board
  arm64: dts: st: describe power supplies for stm32mp257f-dk board
  arm64: dts: st: enable display support on stm32mp235f-dk board
  arm64: dts: st: describe power supplies for stm32mp235f-dk board
  arm64: dts: st: add clock-cells to syscfg node on stm32mp231
  arm64: dts: st: add lvds support on stm32mp235
  arm64: dts: st: add ltdc support on stm32mp235
  arm64: dts: st: add ltdc support on stm32mp231
  arm64: dts: st: omit unused pinctrl groups from stm32mp25 dtb files
  arm64: dts: st: add bootph-all in bsec node to stm32mp215f-dk
  arm64: dts: st: add bsec support to stm32mp21
  ARM: dts: stm32: fix misalignments in nodes of stm32mp131
  ARM: dts: stm32: fix misalignments in nodes of stm32mp151
  arm64: dts: st: describe i2c2 / i2c8 on stm32mp235f-dk
  arm64: dts: st: describe i2c2 / i2c8 on stm32mp257f-dk
  arm64: dts: st: disable DMA usage for i2c on stm32mp257f-ev1
  arm64: dts: st: add i2c2 pinmux nodes in stm32mp25-pinctrl.dtsi
  arm64: dts: st: update i2c nodes interrupt/wakeup-source in stm32mp231
  arm64: dts: st: update i2c nodes interrupt/wakeup-source in stm32mp251
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-04-01 18:56:32 +02:00
Arnd Bergmann
5e9c551265 Samsung DTS ARM changes for v7.1
1. New board: Exynos5250 based Google Manta (Nexus 10).
 2. Few cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmnCiP0QHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD14tID/96p7GLJHYTlWbIACx2dsT/9tm5jFaL5Q5u
 VMo3sr+ajufT/zwMD7P0accA9DXyekXGRNtCS5BdCZtuE7F1/Ia8KEEeDpv78oEJ
 4WaStGFIQZZbzRBab1Z1bPtCRJsbY/7U8FJbAsfCjio2aFl22jL0mvgN5XsieTiD
 09Q3kmjMeJPZbuwTMqMxtNwulEVLbvPlMJ43M1+voh7MJsqFgwclhB8KHbzsgCGt
 478UQSsu8JPAdOHrqmuNiirM8Ltuuet2zwOu6aP5n61+S/buqor6/B67G0oiZYEW
 cEirmYpqwgM8BvvmhZHLJpf3u9+2CfDIq/XA31myjdTACHbxM3fufVF5WiOBP95E
 VoppYmV0Chdq4StZYK3/+RcNHUqsRG+dU6lGT/bn4pbMlmMpUO9aFE8JHdM91LFj
 aQwWSUvJdhLyfIV/DUkgHKtF+vwM8o++jarWlh2ZWo7uY/dEt64e2JkuxD/YMxR3
 zVhcPIL4MxUu47otufYHa2hNnFpWkH/SXwGBIdg2Blnv7F+bOy+MFe735ABgGdZy
 zbq/19cT03Rc09EmrK/onMsPtK7PJQHHYyMhOZJkfZ/4nBG3Aj/q9RWHTQnzKfn5
 QJzVCoGAoFLmG5aoChx9CyuTyQwvSHn9eHd8nMSoBL4beEGww71UjXnr+1rEZsja
 akDhApBYCw==
 =Y3BO
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnNTYIACgkQmmx57+YA
 GNlzjQ/+L3hYDlho6urPWnwAZcH8KIGodFhYt6cv1Sj3eBXilva8JarIa5vRhuMs
 IP9v42Mu+ZC+RN5x5DsfW3tIyayBK3qMY2fDpp6twqSNjpS8j8YSf2yosPbXicgZ
 9CdDggwycLE0PYo1xq3cANdsDqXvwvonYtmxhicBsmvOgmLsz8ZLeVvcumxD0n2B
 wIrKCjJniEGyHc4xY2BcnHRoLJlFpfZf4n2RnoU5MBUBlb8fo8c1z0Ws6LXrGKIc
 fLLGcFgqHx6IjkjdmSuRRPX9gvsnIC6u2rdOXSGiEVQs4VOlnrq61scBnbeh6Pmf
 ofngiQnJTin+Yib0K3CxxSA8q3Pd7CK1HLwkolJtKU+Djg2IJHERDR53pZ7esyjl
 NPM4jPfWPFyF4vu7uX/dZSZQ6CZYCsJ9m0N9cQJ5BZkejyFJT37Wzkd3v2jc1HDI
 K1IyNHPp6UTp9NfD78Yv7NCjP48QglEtl+MGH+rSTWZ7r3giQe+9NY6iYDpAfdYq
 T60/fmtquHrYX7qGojMuQ3D4c+s640lh55XdJcHoV6btAbvQ9rs/LpWegGZWqF9t
 QX0yB5+2Ang9obKc0wwqznythkkVLRc6XZFNJQ+BYnPUjGdNc+kyvvoqR86qxSa4
 ytnAwBcUctg9JEEbd1nIT0y6naHgaewAOfHwmhSai/QPFkhaa3w=
 =5XCY
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM changes for v7.1

1. New board: Exynos5250 based Google Manta (Nexus 10).
2. Few cleanups.

* tag 'samsung-dt-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exyons4412: Drop duplicated I2C address/size-cells
  ARM: dts: exynos4210-smdkv310: Drop duplicated I2C address/size-cells
  ARM: dts: exynos3250: Drop duplicated I2C address/size-cells
  ARM: dts: exynos: Add Google Manta (Nexus 10)
  dt-bindings: ARM: samsung: Add Google Manta (Nexus 10)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-04-01 18:53:19 +02:00
Arnd Bergmann
2feb6df85c Samsung DTS ARM64 changes for v7.1
1. Add initial support for Axis ARTPEC-9 SoC and Alfred board using it.
    Just like ARTPEC-8, this is a derivative of Samsung Exynos SoC made
    for Axis, sharing most or all of core SoC blocks with Samsung
    designs.
 
 2. New boards: Exynos7870 based Samsung Galaxy J7 (2016) and Samsung
    Galaxy J5 (2017).
 
 3. Google GS101 Pixel phone: describe all PMIC regulators and Maxim
    fuel-gauge.
 
 4. ExynosAutov920: add G3D (GPU) clock controller (CMU).
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmnCigYQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD18c4D/0TKjfH5YBXJlaCOIXVwV1BfFteQLFr9Vhn
 CKVpvs/SAaB8Z3Mh9m4L12b/gACufB6Nm0I4y1wyuA/f90dXt918ntcAm+l0fpcu
 VpsOitkHNOXE/+JMyr/7sg8BkS0oU9geLfn68c1JxdvzsE5tTOEPM3wtz0GfhX61
 S1QyUtwyjufvGgVLXP6hkDySj2a9oAnWYxCo30Y+m0D4RrXVzW/rAq+dHTIf4Fep
 N9bOeyYyLO8TCDbn4K8i80QxUjh08u3QfFNxjRg9YjOE4giAaRXVku5erWT90Xkx
 8Oq15FGLUv7LdfKvF8upqGgYfC7v0muMV2wCwHflIwaWcKHheWRKNGpKuwm+E3nl
 k3pTIen881u1cfUZK2LL4nW+yKSBXnLhEeX1oY+/dShbjvr0ys6ExCTtpMRl5uP/
 RczYYKCHeaU/P2mlkM9UNdhdNHs0XA1kN1sqkAe5bZ9il9XLb14ypPQuSez6nTtx
 IQp6PrAY8BegzKHzxLf3fOZulhk4SQXc4nncPwEc2V84gf427h6O6otM64WAbALw
 2y7MZdSHCpRqx6VEX57Fnow+IQrUHo+sGZ7r9rlXwv9ZOR9KG/h6KD641c2yCKdn
 vMC/8rr7hpaTJZMK+qmNFaVLE0ruKSWMkWXaI3AwR2CYwYn75RP0PKAPBeY895j5
 c491yJQTtg==
 =HJ88
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnNTHwACgkQmmx57+YA
 GNl1ug//cuB2QN6wisF+aZLHFaPmdh/Z18iRYJAMzxy1ZLUouec9dXovIFNUjXE1
 8UXzhnmAjgUge4LtKm1pJeW49kcmWPjR534u0XqXVDM/dIHMi6sSWmcPwTDQBti7
 +oWLN81CKs+NH5E8xeTmuSSLguIkeyhpUY1YFOULMird8bIoQJ2wElZVYnapfyTy
 c4lazly7tNNCVvbTeRyLjW8CSvSae9o/ykfv53sqao3kQWK1t8fy9ldIuVwBO9oG
 KYKNaiztCQyki7OKMNze1pwmtCd9dQejVoQo1oIgYeHVQYbv5fIKfiJ3dsQRs1JD
 rWzuYdbRoIBKDbSc/iDXVZd1ZIMML891onS94JsFICImbJjC0pglT5oaAQ0FU2qe
 A9P2UnVP6SyUjRRmtKpAk2uJNuMYyrFarFvt13MWG6N9abYiSOx7+jGr30427jvz
 AeF1n0ub8ZqGw2JozZgRsPfVkHiwcItwtiE5L7Hy8l0kDzvAg1bNfvPlPeDRqstP
 UAdZsGL34C1YHm6r6h1tW2E8h85Qf2mPYTDWAVk/rMFxn8E4Vj3H3h/KZNJmWYXZ
 KAsSc8u1QZW+hIrRhdoW/yFBldWyy3tHiIRPdsy/sTlfo6epwEOiiNTv3Gu8JFWV
 t4Tj1lqKHYDdhKBls6v0gpim5p+4/3/EZaVK5F8y9aKOGQVADG8=
 =2rdh
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt64-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM64 changes for v7.1

1. Add initial support for Axis ARTPEC-9 SoC and Alfred board using it.
   Just like ARTPEC-8, this is a derivative of Samsung Exynos SoC made
   for Axis, sharing most or all of core SoC blocks with Samsung
   designs.

2. New boards: Exynos7870 based Samsung Galaxy J7 (2016) and Samsung
   Galaxy J5 (2017).

3. Google GS101 Pixel phone: describe all PMIC regulators and Maxim
   fuel-gauge.

4. ExynosAutov920: add G3D (GPU) clock controller (CMU).

* tag 'samsung-dt64-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos8895: Move I2C address/size-cells to DTSI
  arm64: dts: exynos7870: Move I2C address/size-cells to DTSI
  arm64: dts: exynos: gs101-pixel-common: add Maxim MAX77759 fuel gauge
  arm64: dts: exynos: add initial support for Samsung Galaxy J5
  dt-bindings: arm: samsung: add compatible for samsung-j5y17lte
  arm64: dts: exynosautov920: add CMU_G3D clock DT nodes
  arm64: dts: exynos: gs101-pixel: add all S2MPG1x regulators
  arm64: dts: exynos: add initial support for Samsung Galaxy J7 (2016)
  dt-bindings: arm: samsung: add compatible for samsung-j7xelte
  arm64: dts: axis: artpec9: Fix missing soc unit address
  arm64: dts: axis: Add ARTPEC-9 Alfred board support
  arm64: dts: exynos: axis: Add initial ARTPEC-9 SoC support
  dt-bindings: arm: axis: Add ARTPEC-9 alfred board
  dt-bindings: clock: Add ARTPEC-9 clock controller

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-04-01 18:34:44 +02:00
Arnd Bergmann
d6b92b6b74 This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 7.1, please pull the following:
 
 - Maira adds the V3D DT node to the 2712 (Raspberry Pi 5) SoC
 
 - Gergor adds the I2C controller, CSI (camera), ISP (image signal
   processor), fixes the pinctrl node and updates the UART10 interrupt
   for the RP1 sister chip to the 2712 (Raspberry Pi 5)
 
 - Rob moves the firmware and GPU to the root level to fix DTC warnings
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmnBjgIACgkQh9CWnEQH
 BwQTsQ//Sodu5MfSCSynhAUrjL9AASh5VOQy0LTshUFF2B3poHNn4qqHxixuCbo5
 LZKCLR9LJ73ZOENo8pXn+MddZ+jkDSZKxY6nkA2uI36ISMWaxGXOZdxWOxUeeed/
 IHGtOutr9L98ymO7oU8EHtU39gduwfyalucsreJTuem7Tp/qji9bxPg3ceY483eS
 4NFbypJem3SOMxho9W5uvlUBTb5oLVWJgbbO/ZkOWHko/euVk3Jg/ATcgGvz0Omb
 YBQuFNgbvmj9SLP9DEWTNzwsCWz5KjiRM0nKtaYdQHol+0V6UFJgi/JRZFxKds9v
 sc9xHxncNyAfu72zn/sUWj9WHmiiivErNpDZtP4mE0uqkKwnJWsMsMvet9Ubz6mT
 oNcIgOwzSNyeVGRfAJXEf2m4fWZOhPkjzjArES8htmLswVdkQTI2/DvjIeN/texG
 xs1g596hFw5Vuh3ly4GLLFhXcXzeI671RZbNgvkwowe4Hs/EnbEulIlsRcWO0iGo
 ZT/ETUXRfdnkh8ZL2p+EUPy13v0w9S+eUBUEn7XdRBzf81bY/f+3RE0UCvbcDRzV
 IF9nK6w0wauxGb1lA83/Y+p4VZL1tc9C+0J+8fQJiRoNdAu/dNn7qu8071UFBJMg
 jd8rWhQ8lmzdCeLJrTdLHEH5/Mm7eJSZL59QS7y8W1NrH/VEK8U=
 =9Bck
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnNRyQACgkQmmx57+YA
 GNmIhw/9FibpxltJDJUUqZOVbObNzNkWMhaRkMomnRZ7+fbdIhi/4Og3nTpqcxUO
 pEbW7OPQX7As8AdhEuiSK19GTnZbtlKhPOzBGTPDn1uaLOHZ1s40nxVXsnLb8Hki
 h/r2MHt8AXnIFREtVIxdhKsnXorcEZLYa2KGxEnortmR3BsNm0ESowjX56K9wHFG
 zIdVwtOGntzXVE14SKKZw2cHUu+7Bvrc4w1mnsffIH8hJlztv59w3n7CFAj7Guqc
 DH6DjpgUPbftehqcedjwjK0580xTDeye/MFgvgoCvQ+0q6O5JbJ6uQoUdPO+g85r
 vGZXT1VXVFcHSaMPVoN/SF36s88EBFCgl+TkLC36AP2w2SbuywOPZ5oPpQeKCNDu
 5kC9EKm1ZDBcAuN4kxjyQDjAtTTaZDASgQKpTiPhsuu1fl/oaQbbOj15mIfW59Vv
 Dj0exL9oJcF5B3EUYtJGxF29lGkTi0G4ORu+jpeFRbozF+tjDP0SwHmhTgbhCHzO
 erhjVH3M+4Jop2A0FTSWna0+LFjJ01lvsODQp3kZMMCLR0ZdClX0rX8YoZ54b6IM
 BWqYNRA7q5Or1dbRnE2DOoUXOGmTKstEKRbvZKqhZewNzBSZi2mZbGp3KjDVzjdY
 7Ve6f89fbV+ah+CPH4FFW2IqH15i64X9p2yDKRTRr8JnOyRNZP4=
 =AREl
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-7.1/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt

This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 7.1, please pull the following:

- Maira adds the V3D DT node to the 2712 (Raspberry Pi 5) SoC

- Gergor adds the I2C controller, CSI (camera), ISP (image signal
  processor), fixes the pinctrl node and updates the UART10 interrupt
  for the RP1 sister chip to the 2712 (Raspberry Pi 5)

- Rob moves the firmware and GPU to the root level to fix DTC warnings

* tag 'arm-soc/for-7.1/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: bcm2712: Move non simple-bus nodes to root level
  arm64: dts: broadcom: bcm2712-d-rpi-5-b: update uart10 interrupt
  arm64: dts: broadcom: bcm2712-d-rpi-5-b: add fixes for pinctrl/pinctrl_aon
  arm64: dts: broadcom: bcm2712-rpi-5-b: add pinctrl properties for csi i2cs
  arm64: dts: broadcom: bcm2712: add camera backend node pispbe
  arm64: dts: broadcom: rp1: add csi nodes
  arm64: dts: broadcom: rp1: add i2c controller
  arm64: dts: broadcom: bcm2712: Add V3D device node

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-04-01 18:26:07 +02:00
Arnd Bergmann
185fb14050 This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 7.1, please pull the following:
 
 - Rafal provides a complete description of the PCIe Root Complex nodes
   in order to silence a number of dtc warnings
 
 - Rosen provides the necessary NVMEM properties to allow describing the
   WAN device MAC address from NVRAM, also adds better LEDs, USB GPIOs
   and Wi-Fi buttons for the Linksys EA9200 router
 
 - Linus completes the BCA devices description by adding the I2C block
   and fixing interrupts for the DMA block on 63138 and 6878
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmnBjUcACgkQh9CWnEQH
 BwQuSw//UCaVf2xSvFi8/XT6SQrfHvPEoZX0AUJWZG2SUVh1YkTJdsWBDVcQErLN
 wwPxOK65q0a7XCA+BdRIAt9W5Boa5kO9zrwpwUXRKBupdbIDH67wxkQV2e73Ne3Z
 FsBqTiOqlNCj8I7f4lzy/uP0/uHR5Nvyh4N4rHRj+hb20dFtOJOeXuMyo+FRIf+f
 alVRFgLJi4P3SxCBsj6xUmR7p2l51MYhVZ/Ind0QwP9ZGBcOg0jfi4EUe07jnolb
 twO9EFPVi/QMVHOnMGmJMz+oDX7Z882SjObB2FHOQPXDbsnONjfW782dwT8VObjM
 vbsyfoH68AtTqbkZ/MXWEJeWYxVI/UQjrvRFkXVCqYpb3B7foo/fDCLi/5wnYMyE
 BYza7w4DxVix4jwdfVeXcIb+wjVt7hrvNb6r+zIx5yHdA9oEiNfkJ1DajsCn50co
 E/+XYq/9r9HxnkK3YkYr3ZLxvxqdXFLpnUaVtarWF3XQbDRqV5931kXfhp9VOO8T
 wHHGiiHi7j2ELh9d38GMaZ95O3KV+3LUaTMHhGN7CKNi7G6gIGVRPVpmI9Ej7nc0
 1g0fRKKKkPFA4aqG6FLWvYzjujoS9+ERRmYBPL3Zt2DXbEASCL2dw1p7eHM5fbu9
 R56SXGhjc05e71DOs/yy5aHInC7RCCowMjVUC4IXRHRNBtAH3bw=
 =ITzn
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnNLNcACgkQmmx57+YA
 GNlGeRAApKrehO59bFAZ3d+VW5rX6jhnY//egiYGse2j7NWsR9pgKTBSLHzSqwob
 k5/ZDtrUxjWyt7AtNcB3FKa2eZPO6AZPZ0j0lIFPXARmOPJM+qy0aJHlgA3gFbht
 adkz8nlpkVddS2dLlK+TXnmcLpmnAlBULZ4QbsvDyasWFKyacbm8z8ry+M6e4IXB
 Y+1Jc/hPE8xIozMZ0OWL8yfh4rnCUsOolJif3kK5REX+rCrgOci7U3bEq93BLMb6
 /jY1cSSxXXG7w3S/VPZgcqHTJpzMuKLUL0shH3j4rboaproBtvJ7i0280EGPVlwQ
 cFDn6gi0GQ15eHinPsfYrGZCfXBDRYF2w/hiTivT0HHdwXcQIZCW5JaVqmhSf6SL
 vWA1hfIZwgk4CyRa+ESHfG/vLRMPfqqEgjXpNc44sl8I0TRHubj+cHpqpZKYqYNY
 DbE8WbcsEfCe4ROhMQu9nKIFTodgV8UhvxkcDuIhO5CslQaTyXiMMofWSBR6rdQN
 ZIfoZ/WQYDgtzTlKCeIKryjE7Ii6vp55Th1Iyzj054qssSjVSH6/yfOCuXyfKZxP
 tnznRvtZ2be422BchyPlTYIGErOWMfaJHZVnVmEnQ/DaosfSdh6PvJ1Aep1sF7UL
 XIN7VWfQTbefrfFJXEU9dhKqCDEN4FFMVhkWRuIQJ0VMBqZZJYI=
 =KEH/
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-7.1/devicetree' of https://github.com/Broadcom/stblinux into soc/dt

This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 7.1, please pull the following:

- Rafal provides a complete description of the PCIe Root Complex nodes
  in order to silence a number of dtc warnings

- Rosen provides the necessary NVMEM properties to allow describing the
  WAN device MAC address from NVRAM, also adds better LEDs, USB GPIOs
  and Wi-Fi buttons for the Linksys EA9200 router

- Linus completes the BCA devices description by adding the I2C block
  and fixing interrupts for the DMA block on 63138 and 6878

* tag 'arm-soc/for-7.1/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM5301X: EA9200: specify partitions
  ARM: dts: BCM5301X: EA9200: add LEDs
  ARM: dts: BCM5301X: EA9200: add USB GPIOs
  ARM: dts: BCM5301X: EA9200: add WiFi button
  ARM: dts: broadcom: bcm2835-rpi: Move non simple-bus nodes to root level
  ARM: dts: bcm63148: Add I2C block
  ARM: dts: bcm63138: Add I2C block
  ARM: dts: bcm6878: Add I2C bus block
  ARM: dts: bcm6855: Add I2C bus blocks
  ARM: dts: bcm6846: Add I2C bus block
  ARM: dts: bcm63138: Fix DMA IRQ
  ARM: dts: bcm6878: Fix PL081 DMA block IRQ
  ARM: dts: BCM5301X: AC5300: set WAN MAC from nvram
  ARM: dts: BCM5301X: AC3100: set WAN MAC from nvram
  ARM: dts: BCM5301X: panamera: set WAN MAC from nvram
  ARM: dts: BCM5301X: EA9200: set WAN MAC from nvram
  ARM: dts: BCM5301X: add root pcie bridges
  ARM: dts: BCM5301X: Drop extra NAND controller compatible
  ARM: dts: BCM5301X: Describe PCIe controllers fully

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-04-01 16:33:24 +02:00
Krzysztof Kozlowski
5ac16e6593 nuvoton: first batch of arm64 devicetree changes for v7.1
Just the one change this time, dropping syscon properties where they weren't
 defined.
 -----BEGIN PGP SIGNATURE-----
 
 iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCacSlrxwcYW5kcmV3QGNv
 ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmeIIA/0m24mZm/Ld0Nhu9Kphg
 sz1rXcl1/0O9ryEJjIN+jfuRAP9RFCU07YOupuAL4mr+XTOj5b7SIMgxmBlC+hOt
 ql1WAA==
 =cbw6
 -----END PGP SIGNATURE-----

Merge tag 'nuvoton-arm64-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt

nuvoton: first batch of arm64 devicetree changes for v7.1

Just the one change this time, dropping syscon properties where they weren't
defined.

* tag 'nuvoton-arm64-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
  arm64: dts: nuvoton: drop unused syscon property from watchdog node

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01 13:38:29 +02:00
Krzysztof Kozlowski
08b67f170f aspeed: first batch of devicetree changes for v7.1
New platforms:
 
 - Asus Kommando IPMI card
 - Asrock Paul IPMI card
 
 Updated platforms:
 
 - Anacapa (Meta): NFC and EEPROMs
 - MSX4 (Nvidia): 128M layout for the alternate boot flash
 -----BEGIN PGP SIGNATURE-----
 
 iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCacSiYhwcYW5kcmV3QGNv
 ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmzYsA/2w2v7dumDfK2jhdHf/H
 cMtJFsJQbmwv1+0Url6l7ShIAP9l+SxK8UvLR98yzcrHX4i78iRvtHHHTsuc/rx2
 oo7RBQ==
 =r4r3
 -----END PGP SIGNATURE-----

Merge tag 'aspeed-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt

aspeed: first batch of devicetree changes for v7.1

New platforms:

- Asus Kommando IPMI card
- Asrock Paul IPMI card

Updated platforms:

- Anacapa (Meta): NFC and EEPROMs
- MSX4 (Nvidia): 128M layout for the alternate boot flash

* tag 'aspeed-7.1-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
  ARM: dts: aspeed: anacapa: Add retimer EEPROMs
  ARM: dts: aspeed: anacapa: add NFC device
  ARM: dts: aspeed: Add Asrock Paul IPMI card
  dt-bindings: arm: aspeed: Add Asrock Paul IPMI card
  ARM: dts: aspeed: Add 128M alt flash layout to NVIDIA MSX4
  ARM: dts: aspeed: Add Asus Kommando IPMI card
  dt-bindings: arm: aspeed: Add Asus Kommando IPMI card

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-04-01 13:35:29 +02:00
Krzysztof Kozlowski
dadfceb3bc Armv8 Juno/FVP/Vexpress updates for v7.1
1. The primary addition is initial support for Zena CSS that includes:
    a new binding compatibility, a shared `zena-css.dtsi` description, and
    an FVP device tree.
 
 2. Extension of Corstone-1000 FVP platform support with binding updates
    to add the new `arm,corstone1000-a320-fvp` platform, and the
    `arm,corstone1000-ethos-u85` NPU integration.
 
 Overall, this combines new platform enablement with some DTS layout
 cleanup for Arm reference FVP based systems.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmnCQHUACgkQAEG6vDF+
 4pgiqg//YYEnHS2nA3PgwsMwMYqKdUfLVZdE5wrwxbSck0zrDYynm8rsIdhkiLgJ
 IY06ZUshziuyraXYlIssGJl3XfAb5mieUksXGaWmVRv3uTbWGZHmYyuKIGj3jDba
 vkNi0d79ijoo8O5cDIJ8Uv/baVqOt26QxqIC1azI9yXkoYDXXL4Mv3olSS4M16/V
 P/GVylL8FUWEGgDBVfm3lOHFIzHgibKfcmETRTRWWzzDMOSL0dYxRtrnb8uQc6A0
 VpFkfHm2bZXaBbXDwmwV5vbv3nUwAq1J+AjyYOfCYNLCNm7cBKIgdJ1E/aH3UHQk
 69BLGMdXgP5gXdtKLBXnOY0ZJmth2tRWOpKdUke5PDgkc3kA+Vw2vFRcFRMAKOZC
 9Yt+0EsblJAqRH92T9AQ6QePoJx5bfHID1k3JTrCYLq5x/KeMY+3Q8HZund4mSA+
 nrYDl5oYMKq2FJ9HTPpzBuiF8iFwe7jdtVkIl8X5jLyD1IM05SU2CoDEhvdM3bXp
 ixejBshDLeg8iql6kSO6OpsEaFBW1GNk+rKMNyHzGiTLEtJQgaHF42yRRLJl7khG
 XlK4fQH/NXjcLKGWtsJlA7YB1GOGAxgGRL2jnNhNXHUsXg9NYS2Ww93MUmRmV1D2
 qPkJJ3oCdB5XHF5ZfahrAeOgwzbxlZjD3EZbJPohSOs/bgMUI7A=
 =pqOI
 -----END PGP SIGNATURE-----

Merge tag 'juno-updates-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt

Armv8 Juno/FVP/Vexpress updates for v7.1

1. The primary addition is initial support for Zena CSS that includes:
   a new binding compatibility, a shared `zena-css.dtsi` description, and
   an FVP device tree.

2. Extension of Corstone-1000 FVP platform support with binding updates
   to add the new `arm,corstone1000-a320-fvp` platform, and the
   `arm,corstone1000-ethos-u85` NPU integration.

Overall, this combines new platform enablement with some DTS layout
cleanup for Arm reference FVP based systems.

* tag 'juno-updates-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: arm/corstone1000: Add corstone-1000-a320
  arm64: dts: arm/corstone1000: Move FVP peripherals to separate .dtsi
  arm64: dts: arm/corstone1000: Move cpu nodes
  dt-bindings: npu: arm,ethos: Add "arm,corstone1000-ethos-u85"
  dt-bindings: arm,corstone1000: Add "arm,corstone1000-a320-fvp"
  arm64: dts: zena: Move SRAM into SoC and memory node out of SoC
  arm64: dts: zena: Add support for Zena CSS
  dt-bindings: arm: Add Zena CSS compatibility

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-03-27 12:59:34 +01:00
Krzysztof Kozlowski
b33ad6bc6e MediaTek ARM32 Device Tree Updates
This adds a single commit fixing a dtbs_check validation error
 by changing the fallback compatible of the efuse node to the
 correct one in MT7623.
 -----BEGIN PGP SIGNATURE-----
 
 iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCab0HMxsUgAAAAAAEAA5t
 YW51MiwyLjUrMS4xMSwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
 bGFib3JhLmNvbQAKCRCaNgTPrZeEeNJwAPkBRF11j20Sv1+TNdqwcxuHr8WEVq4d
 xMZbg6uqTURiSQEApsHSJSRrPjGSlt4sIyAtKcWcQigfM0zqf63UbEGPZA8=
 =NeiC
 -----END PGP SIGNATURE-----

Merge tag 'mtk-dts32-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt

MediaTek ARM32 Device Tree Updates

This adds a single commit fixing a dtbs_check validation error
by changing the fallback compatible of the efuse node to the
correct one in MT7623.

* tag 'mtk-dts32-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
  ARM: dts: mediatek: mt7623: fix efuse fallback compatible

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-03-27 12:47:09 +01:00
Krzysztof Kozlowski
789ca08f31 MediaTek ARM64 DeviceTree updates
This adds fixes and improvements for already supported devices.
 
 In particular:
  - The gpio-ranges pin could was fixed in MT6795, MT7981B, and
    MT7986A SoCs, as the very last GPIO was unusable; Even though
    anyway unused, this fixes the hardware description.
  - Model string fixes for Bananapi BPI-R4 Pro 4E/8X: now the
    correct model is shown.
  - The MT6359 PMIC gets disambiguation for two default regulator
    names, mainly fixing issues seen on U-Boot, but also making
    the regulators visually distinguishable in a summary...!
  - Aliases for eMMC/SD controllers added in MT8365 EVK board,
    MT8395 Radxa NIO-12L and Genio 1200 for consistency
  - Fixes to the MediaTek AUDSYS devicetree binding
 
 ....and honorable mention goes to:
  - MT8195 Cherry Chromebooks get their WiFi on PCI Express and
    Bluetooth on USB described with the proper power supplies now
    tied to the correct devices (USB VBUS and PCIE3v3): this is
    now described almost perfectly, or at least links the right
    resources in the right places.
    This is also done as a preparation for when the M.2 E-Key
    connector binding will be upstreamed.
  - MT8195 Cherry Dojo gets its M.2 M-Key slot correctly described
    with the new pcie-m2-m-connector binding.
 -----BEGIN PGP SIGNATURE-----
 
 iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCab0LcxsUgAAAAAAEAA5t
 YW51MiwyLjUrMS4xMSwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
 bGFib3JhLmNvbQAKCRCaNgTPrZeEeAt6AP9balK82Qvh3mswEasjVnOy3+nQDK13
 CAGOZrjxCvisPwD/aLDqYCaev2u97jprUho9tVQk0EAT6fzWIOTJESEDqgA=
 =uxBh
 -----END PGP SIGNATURE-----

Merge tag 'mtk-dts64-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt

MediaTek ARM64 DeviceTree updates

This adds fixes and improvements for already supported devices.

In particular:
 - The gpio-ranges pin could was fixed in MT6795, MT7981B, and
   MT7986A SoCs, as the very last GPIO was unusable; Even though
   anyway unused, this fixes the hardware description.
 - Model string fixes for Bananapi BPI-R4 Pro 4E/8X: now the
   correct model is shown.
 - The MT6359 PMIC gets disambiguation for two default regulator
   names, mainly fixing issues seen on U-Boot, but also making
   the regulators visually distinguishable in a summary...!
 - Aliases for eMMC/SD controllers added in MT8365 EVK board,
   MT8395 Radxa NIO-12L and Genio 1200 for consistency
 - Fixes to the MediaTek AUDSYS devicetree binding

....and honorable mention goes to:
 - MT8195 Cherry Chromebooks get their WiFi on PCI Express and
   Bluetooth on USB described with the proper power supplies now
   tied to the correct devices (USB VBUS and PCIE3v3): this is
   now described almost perfectly, or at least links the right
   resources in the right places.
   This is also done as a preparation for when the M.2 E-Key
   connector binding will be upstreamed.
 - MT8195 Cherry Dojo gets its M.2 M-Key slot correctly described
   with the new pcie-m2-m-connector binding.

* tag 'mtk-dts64-for-v7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
  arm64: dts: mediatek: mt7986a: Fix gpio-ranges pin count
  arm64: dts: mediatek: mt7981b: Fix gpio-ranges pin count
  arm64: dts: mediatek: mt6795: Fix gpio-ranges pin count
  dt-bindings: arm: mediatek: audsys: fix formatting issues
  arm64: dts: mediatek: mt8195-cherry-dojo: Describe M.2 M-key NVMe slot
  arm64: dts: mediatek: mt8195-cherry: add WiFi PCIe and BT USB power supplies
  arm64: dts: mediatek: mt7988a-bpi-r4pro: fix model string
  arm64: dts: mt8167: Reorder nodes according to mmio address
  arm64: dts: mediatek: mt6359: give regulators unique names
  arm64: dts: mediatek: mt8365: Describe infracfg-nao as a pure syscon
  arm64: dts: mediatek: mt8365-evk: add mmc aliases
  arm64: dts: mediatek: mt8395-radxa-nio-12l: add mmc aliases
  arm64: dts: mediatek: mt8395-genio-common: add mmc aliases
  arm64: dts: mediatek: mt8195-cherry: Disable xhci1 completely

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-03-27 12:45:33 +01:00
Krzysztof Kozlowski
c4d677691d T-HEAD Devicetrees for 7.1
Update the T-Head TH1520 RISC-V SoC device tree to support the
 Verisilicon DC8200 display controller (called DPU in manual) and the
 Synopsys DesignWare HDMI TX controller. In addition, enable HDMI output
 for the LicheePi 4a board.
 
 Signed-off-by: Drew Fustini <fustini@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHQEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCabbfiAAKCRDb7CzD2Six
 DFM4APUQJw9Pua59fb4vMqmvRZC9CJ2F6l726Fx7LCjtQXEYAP9rIWyX0npi6DX9
 aHrvuRB8WDLGRsMF5dFO++aHy/PQAg==
 =z1x0
 -----END PGP SIGNATURE-----

Merge tag 'thead-dt-for-v7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into soc/dt

T-HEAD Devicetrees for 7.1

Update the T-Head TH1520 RISC-V SoC device tree to support the
Verisilicon DC8200 display controller (called DPU in manual) and the
Synopsys DesignWare HDMI TX controller. In addition, enable HDMI output
for the LicheePi 4a board.

* tag 'thead-dt-for-v7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux:
  riscv: dts: thead: lichee-pi-4a: enable HDMI
  riscv: dts: thead: add DPU and HDMI device tree nodes

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2026-03-27 12:40:55 +01:00
Marek Vasut
be3810a2eb ARM: dts: renesas: Drop KSZ8041 PHY C22 compatible strings
The Microchip KSZ8041 PHY schema indicates that the compatible string
"ethernet-phy-id0022.1537" must not be followed by any other compatible
string.  Drop trailing "ethernet-phy-ieee802.3-c22" to match the schema.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326045523.223620-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-26 20:00:35 +01:00
Marek Vasut
5729a1acad ARM: dts: renesas: rza2mevb: Drop RTL8201F PHY C22 compatible string
The Realtek RTL8201F PHY schema indicates that the compatible string
"ethernet-phy-id001c.c816" must not be followed by any other compatible
string.  Drop trailing "ethernet-phy-ieee802.3-c22" to match the schema.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326045416.223556-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-26 20:00:11 +01:00
Marek Vasut
9d3e7e58b8 ARM: dts: renesas: r8a7742-iwg21d-q7-dbcm-ca: Drop KSZ8081 PHY C22 compatible string
The Microchip KSZ8081 PHY schema indicates that the compatible string
"ethernet-phy-id0022.1560" must not be followed by any other compatible
string.  Drop trailing "ethernet-phy-ieee802.3-c22" to match the schema.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326045355.223529-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-26 19:59:28 +01:00
Biju Das
abe27c6b2e arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board
Add the initial device tree for the Renesas RZ/G3L SMARC EVK board.

Added placeholders to avoid compilation error with the common code in
renesas-smarc2.dtsi.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260324114329.268249-12-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-26 19:56:25 +01:00
Biju Das
7eeed6cd6a arm64: dts: renesas: renesas-smarc2: Move usb3 nodes to board DTS
The SMARC2 board DTSI is common to multiple SoCs.  Move the USB3 nodes
to the board DTS, as some SoCs (e.g. RZ/G3[SL]) do not support USB3.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260324114329.268249-11-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-26 19:56:25 +01:00
Biju Das
e130dde0ab arm64: dts: renesas: Add initial support for RZ/G3L SMARC SoM
Add initial support for the RZ/G3L SMARC SoM with 2GiB memory and
extal clk.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260324114329.268249-10-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-26 19:56:24 +01:00
Biju Das
a57349a7a1 arm64: dts: renesas: Add initial DTSI for RZ/G3L SoC
Add the initial DTSI for the RZ/G3L SoC.
The files in this commit have the following meaning:
  - r9a08g046.dtsi:    RZ/G3L family SoC common parts
  - r9a08g046l48.dtsi: RZ/G3L R9A08G046L48 SoC-specific parts

Add placeholders to reuse the code for the Renesas SMARC II carrier
board.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260324114329.268249-9-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-26 19:56:11 +01:00
Geert Uytterhoeven
eba48cde28 Renesas RZ/G3L DT Binding Definitions
DT bindings and binding definitions for the Renesas RZ/G3L (R9A08G046)
 SoC, shared by driver and DT source files.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCacV+yAAKCRCKwlD9ZEnx
 cM9HAQDcklDcgpObjF+qzxC3O5ktUR8uVE+KaaKy/DiyYkZO0AEAyG8NUK3unTZY
 6ZLj8DIpHVjHIhBPUGzjzNt30OYj4g8=
 =a7gU
 -----END PGP SIGNATURE-----

Merge tag 'renesas-r9a08g046-dt-binding-defs-tag1' into renesas-dts-for-v7.1

Renesas RZ/G3L DT Binding Definitions

DT bindings and binding definitions for the Renesas RZ/G3L (R9A08G046)
SoC, shared by driver and DT source files.
2026-03-26 19:55:57 +01:00
Ovidiu Panait
d26e1c84c0 arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add versa3 clock generator node
Add versa3 clock generator node. It provides clocks for the RTC, PCIe
and audio devices.

Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260302165441.4457-8-ovidiu.panait.rb@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-26 19:49:48 +01:00
Biju Das
b822fb8250 dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3L SoC
Document the device tree bindings for the Renesas RZ/G3L SoC Clock Pulse
Generator (CPG). RZ/G3L CPG is similar to RZ/G2L CPG but has 5 clocks
compared to 1 clock on other SoCs.

Also define RZ/G3L (R9A08G046) Clock Pulse Generator Core Clocks, as
listed in section 4.4.4.1 ("Block Diagram of the Clock System"), module
clock outputs, as listed in section 4.4.2 ("Clock List r1.00") and add
Reset definitions referring to registers CPG_RST_* in Section 4.4.3
("Register") of the RZ/G3L Hardware User's Manual (Rev.1.00 Oct, 2025).

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260324114329.268249-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-26 19:44:48 +01:00
Adam Ford
1380e36cf8 arm64: dts: renesas: beacon-renesom: Remove LVDS Panel
The LVDS Panel was never shipped from Beacon, and there are device
tree errors, so rather than trying to fix them, remove it instead.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260325162735.24467-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:50 +01:00
Herve Codina (Schneider Electric)
c07065ba87 ARM: dts: r9a06g032: Add #address-cells to the GIC node
When checking dts involving the r9a06g032.dtsi file, the following kind
of warnings are reported:
   Missing property '#address-cells' in node xxx, using 0 as fallback

Indeed, #address-cells is not present in the GIC interrupt controller
node.

Fix it adding the missing property.

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property in PCI node and in IRQ mux node consists of
   several components and the component related to "parent unit
   address", which size is defined by '#address-cells' of the node
   pointed to by the interrupt-parent component, is not used (=0)

No functional change.

Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260325095718.388157-1-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:50 +01:00
Fabrizio Castro
830558b4aa arm64: dts: renesas: r9a09g056: Remove wdt{0,2,3} nodes
The Renesas RZ/V2N SoC (a.k.a. r9a09g056) comes with 4 CA55
cores and 1 CM33 core.

While the user manual doesn't explicitly specify which cores
should have access to particular watchdogs, it turns out that
(similarly to the Renesas RZ/V2H(P)) it only makes sense for
Linux to use WDT1.

Remove DT nodes wdt{0,2,3} from the RZ/V2N SoC specific dtsi
to make it compliant with the original design intent.

This change is harmless as there are no users for the nodes
being stripped out of this device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260324225239.19136-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:50 +01:00
Scott Murray
7cc36d6d7c arm64: dts: renesas: sparrow-hawk: Add overlay for Olimex MIPI-HDMI adapter
Add a DT overlay to bind the Olimex MIPI-HDMI dual-lane DSI-to-HDMI adapter
on the Retronix R-Car V4H Sparrow Hawk board.

Current device link is at https://www.olimex.com/Products/IoT/ESP32-P4/MIPI-HDMI/open-source-hardware

Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260320025328.509003-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:50 +01:00
John Madieu
092ff7ab72 arm64: dts: renesas: r9a09g047e57-smarc: Enable PCIe
The RZ Smarc Carrier-II board has PCIe slots mounted on it.
Enable PCIe support.

Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260318085119.44717-5-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:50 +01:00
John Madieu
8af9fd59cb arm64: dts: renesas: r9a09g047e57-smarc-som: Add PCIe reference clock
The RZ/G3E SMARC SoM has a fixed 100 MHz reference clock generator
for PCIe.  Model it as a fixed-clock and assign it to the PCIe port.

Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260318085119.44717-4-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:50 +01:00
John Madieu
1ac57c9830 arm64: dts: renesas: r9a09g047: Add PCIe node
The RZ/G3E SoC family features an x2 PCIe IP.  Add the PCIe node.

Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260318085119.44717-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:50 +01:00
Marek Vasut
0c3cd7fe2c arm64: dts: renesas: Fix KSZ9131 PHY bogus txdv-skew-psec properties
The KSZ9131 schema does not document the "txdv-skew-psec" property,
neither does the kernel driver support this property.  It does however
document and support the "txen-skew-psec" property.  Fix what is likely
a copy-paste error from the matching "rxdv-skew-psec" property, use the
"txen-skew-psec" property instead of the "txdv-skew-psec" property.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260313164008.40933-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:49 +01:00
Marek Vasut
fab27bffdf arm64: dts: renesas: Drop KSZ9131 PHY C22 compatible strings
The Microchip KSZ9131 PHY schema indicates that the compatible string
"ethernet-phy-id0022.1640" must not be followed by any other compatible
string.  Drop trailing "ethernet-phy-ieee802.3-c22" to match the schema.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260313164008.40933-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:42 +01:00
Marek Vasut
5849a2dc84 arm64: dts: renesas: Drop RTL8211F PHY C22 compatible strings
The Realtek RTL8211F PHY schema indicates that the compatible string
"ethernet-phy-id001c.c916" must not be followed by any other compatible
string.  Drop trailing "ethernet-phy-ieee802.3-c22" to match the schema.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260313164008.40933-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:33 +01:00
Marek Vasut
070bcb0555 arm64: dts: renesas: Drop RTL8211E PHY C22 compatible strings
The Realtek RTL8211E PHY schema indicates that the compatible string
"ethernet-phy-id001c.c915" must not be followed by any other compatible
string.  Drop trailing "ethernet-phy-ieee802.3-c22" to match the schema.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260313164008.40933-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:40:19 +01:00
Marek Vasut
2425780b0a arm64: dts: renesas: sparrow-hawk: Add overlay for WaveShare Display 13.3"
Add a DT overlay to bind the WaveShare 13.3inch 1920x1080 DSI Capacitive
Touch Display on the Retronix R-Car V4H Sparrow Hawk board.

Current device link is at https://www.waveshare.com/13.3inch-dsi-lcd.htm

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260117005028.126361-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2026-03-25 18:34:20 +01:00
Raphael Gallais-Pou
407b861f4d arm64: defconfig: Enable STMicroelectronics STM32 display support
Enable STMicroelectronics STM32 display support as module.
This includes:
  * DRM_STM
  * DRM_STM_LVDS
  * BACKLIGHT_GPIO
  * TOUCHSCREEN_ILI210X

This display is used on several SoCs and boards such as STM32MP257F-EV1
and STM32MP257F-DK.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260205-master-v1-1-dcefcabc2934@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:49 +01:00
Raphael Gallais-Pou
897b9a36c2 arm64: dts: st: enable display support on stm32mp257f-dk board
Enable the following IPs on stm32mp257f-dk in order to get display:
   * LTDC
   * LVDS
   * WSVGA LVDS panel (1024x600)
   * Panel LVDS backlight as GPIO backlight
   * ILI2511 i2c touchscreen

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-9-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:49 +01:00
Raphael Gallais-Pou
c5dad91c21 arm64: dts: st: describe power supplies for stm32mp257f-dk board
Describe power supplies for stm32mp257f-dk board.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-8-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:48 +01:00
Raphael Gallais-Pou
973f230c40 arm64: dts: st: enable display support on stm32mp235f-dk board
Enable the following IPs on stm32mp235f-dk in order to get display:
   * LTDC
   * LVDS
   * WSVGA LVDS panel (1024x600)
   * Panel LVDS backlight as GPIO backlight
   * ILI2511 i2c touchscreen

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-7-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:48 +01:00
Raphael Gallais-Pou
963758188e arm64: dts: st: describe power supplies for stm32mp235f-dk board
Describe power supplies for stm32mp235f-dk board.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-6-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:48 +01:00
Raphael Gallais-Pou
eb0528245f arm64: dts: st: add clock-cells to syscfg node on stm32mp231
Make the syscfg node a clock provider so clock consumers can reach child
clocks through device-tree.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-5-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:48 +01:00
Raphael Gallais-Pou
afb3dcfe96 arm64: dts: st: add lvds support on stm32mp235
The LVDS is used on STM32MP2 as a display interface.

Add the LVDS node.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-4-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:48 +01:00
Raphael Gallais-Pou
5ef22cf564 arm64: dts: st: add ltdc support on stm32mp235
Add the LTDC node for stm32mp235 SoC and handle its loopback clocks.

ck_ker_ltdc has the CLK_SET_RATE_PARENT flag.  While having this flag is
semantically correct, it for now leads to an improper setting of the
clock rate.  The ck_ker_ltdc parent clock is the flexgen 27, which does
not support changing rates yet.  To overcome this issue, a fixed clock
can be used for the kernel clock.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-3-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:47 +01:00
Raphael Gallais-Pou
e12becdf89 arm64: dts: st: add ltdc support on stm32mp231
The LCD-TFT Display Controller (LTDC) handles display composition,
scaling and rotation.  It provides a parallel digital RGB flow to be
used by display interfaces.

Add the LTDC node.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://lore.kernel.org/r/20260210-display-v2-2-0592bd514958@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:47 +01:00
Amelie Delaunay
84c9ed3a77 arm64: dts: st: omit unused pinctrl groups from stm32mp25 dtb files
stm32mp25-pinctrl.dtsi gathers all pinctrl groups from current and future
STM32MP25-based boards. Some groups may remain unused by any board,
resulting in wasted binary space.
Adding /omit-if-no-ref/ to the groups will remove unused groups from the
device tree blobs.

Use the following regex to update the file:
's/^\t[^:]\+: [^ ]\+ {$/\t\/omit-if-no-ref\/\n&/'
Also, merge the duplicated pinctrl_z node.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20260311-mp25_pinctrl_omit-v1-1-5a3d40046b10@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:47 +01:00
Patrice Chotard
908d0138b4 arm64: dts: st: add bootph-all in bsec node to stm32mp215f-dk
Add bootph-all property in bsec node to ensure that bsec node
is included in U-Boot device tree for all phases.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20260211-upstream_stm32mp21_bsec_nodes-v1-2-8379bf97b0bc@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:47 +01:00
Patrice Chotard
5cccb3f708 arm64: dts: st: add bsec support to stm32mp21
Add BSEC support to STM32MP21 SoC family with SoC information:
- RPN = Device part number (BSEC_OTP_DATA9)
- PKG = package data register (Bits 2:0 of BSEC_OTP_DATA122)

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20260211-upstream_stm32mp21_bsec_nodes-v1-1-8379bf97b0bc@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:47 +01:00
Amelie Delaunay
b7fc8970e7 ARM: dts: stm32: fix misalignments in nodes of stm32mp131
Since the ETZPC system bus was introduced, misalignments have appeared
in some nodes moved under the etzpc parent node.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20260304-mp1x_alignment_issues-v1-2-19a8013782a5@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:46 +01:00
Amelie Delaunay
9203b1605c ARM: dts: stm32: fix misalignments in nodes of stm32mp151
Since the ETZPC system bus was introduced, misalignments have appeared
in some nodes moved under the etzpc parent node.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20260304-mp1x_alignment_issues-v1-1-19a8013782a5@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:46 +01:00
Alain Volmat
796766ceba arm64: dts: st: describe i2c2 / i2c8 on stm32mp235f-dk
Add nodes for i2c2 and i2c8 available on stm32mp235f-dk board.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260224-stm32-i2c-dt-updates-v1-9-347cf6fca7d1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:46 +01:00
Alain Volmat
4797190881 arm64: dts: st: describe i2c2 / i2c8 on stm32mp257f-dk
Add nodes for i2c2 and i2c8 available on stm32mp257f-dk board.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260224-stm32-i2c-dt-updates-v1-8-347cf6fca7d1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2026-03-25 17:37:46 +01:00