Add support for target based solicited requests and responses.
Add support for tport definitions and processing.
Add support for restarting the IT nexus.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406120146.xchlZbqX-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202412081427.SlsFIJY4-lkp@intel.com/
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Co-developed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Signed-off-by: Gian Carlo Boffa <gcboffa@cisco.com>
Co-developed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Arun Easi <aeasi@cisco.com>
Signed-off-by: Arun Easi <aeasi@cisco.com>
Co-developed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20241212020312.4786-5-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sending host information to shost_printk() prior to host initialization in
fnic is unnecessary. Replace shost_printk() and a printk() prior to this
initialization with dev_info() and dev_err() accordingly.
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://lore.kernel.org/r/20241212020312.4786-2-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The elevator core now allows instances of 'struct elv_fs_entry' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250102-sysfs-const-attr-elevator-v1-4-9837d2058c60@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The elevator core now allows instances of 'struct elv_fs_entry' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250102-sysfs-const-attr-elevator-v1-3-9837d2058c60@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The elevator core now allows instances of 'struct elv_fs_entry' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250102-sysfs-const-attr-elevator-v1-2-9837d2058c60@weissschuh.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Skip the reset settle delay during error handling since the scsi_debug
driver doesn't need this delay.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241216184852.2626339-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In cxl_dvsec_rr_decode() the pci driver expects to retrieve a cxlds,
struct cxl_dev_state, from the driver_data field of struct device.
While that works for Type 3, drivers for Type 1/2 devices may not
put a cxlds in the driver_data field.
In preparation for supporting Type 1/2 devices, replace parameter
'struct device' with 'struct cxl_dev_state' in cxl_dvsec_rr_decode().
Remove the unused parameter 'cxl_port' in cxl_dvsec_rr_decode().
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20241203162112.5088-1-alucerop@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The HMAT messages printed at boot, beyond being noisy, can also print
details for nodes that are not yet enabled. The primary method to
consume HMAT details is via sysfs, and the sysfs interface gates what is
emitted by whether the node is online or not. Hide the messages by
default by moving them from "info" to "debug" log level.
Otherwise, these prints are just a pretty-print way to dump the ACPI
HMAT table. It has always been the case that post-analysis was required
for these messages to map proximity-domains to Linux NUMA nodes, and as
Priya points out that analysis also needs to consider whether the
proximity domain is marked "enabled" in the SRAT.
Reported-by: Priya Autee <priya.v.autee@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/170668982094.318782.2963631284830500182.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Thomas Weißschuh <linux@weissschuh.net> says:
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-0-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-11-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-10-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-9-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-8-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-7-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-6-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-5-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-4-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-3-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-2-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sysfs core now allows instances of 'struct bin_attribute' to be moved
into read-only memory. Make use of that to protect them against accidental
or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-1-f0a5e54b3437@weissschuh.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.7
This patch set contains fixes related to smatch, clean up of obsolete code
and global spinlocks, changes to ADISC and LS_RJT handling, and support for
large fw object reads used in proprietary applications.
The patches were cut against Martin's 6.14/scsi-queue tree.
Link: https://lore.kernel.org/r/20241212233309.71356-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current lpfc bsg implementation allows a maximum fw read object size of
30KB. Implementation and support for read object mailbox commands for fw
objects larger than 30KB are now required for proprietary applications.
Thus, update the lpfc_sli_config_emb0_subsys structure and its associated
submission and completion paths to accommodate for an alternative form of
read object command that supports large fw objects.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are unused fields in mailbox commands that query for firmware
configuration information. As such, update the struct definitions by
correcting the name of certain fields and removing the unused fields.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In attempt to reduce the amount of unnecessary ndlp->lock acquisitions in
the lpfc driver, change save_flags into an unsigned long bitmask and use
clear_bit/test_bit bitwise atomic APIs instead of reliance on ndlp->lock
for synchronization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a LS_RJT is received with reason explanation authentication required,
current driver logic is to retry the PLOGI up to 48 times. In the worse
case scenario, 48 retries can take longer than dev_loss_tmo and if there is
an RSCN received indicating an authentication requirement change, the
driver may miss processing it. Fix by adding logic to specifically handle
reason explanation authentication required and set the max retry count to 8
times.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In lpfc_check_adisc, remove the requirement that the ndlp object must have
been RPI registered. Whether or not the ndlp is RPI registered is
unrelated to verifying that the received ADISC is intended for that ndlp
rport object.
After ADISC receipt, there's no need to put the ndlp state into NPR. Let
the cmpl routines from the actions taken earlier in ADISC handling set the
proper ndlp state.
Also, refactor when a RESUME_RPI mailbox command should be sent. It should
only be sent if the RPI registered flag is set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the NLP_TARGET_REMOVE flag as its usage is obsolete. The current
framework is to rely on the lpfc_dev_loss_tmo_callbk from upper layer to
notify final ndlp kref release. There's no need to specifically set
NLP_EVT_DEVICE_RM when a LOGO completes. The dev_loss_tmo_callbk is
responsible for the final kref put.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Qualify setting the REG_FCFI MAM field to FCoE adapters only by keying off
HBA_FCOE_MODE phba->hba_flag. The field is not applicable to FC adapters.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix smatch warning by redefining local variable memory_flags from int to
gfp_t.
lpfc_scsi.c: warning: incorrect type in argument 2 (different base types)
lpfc_scsi.c: expected restricted gfp_t [usertype] gfp_mask
lpfc_scsi.c: got int memory_flags
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241212233309.71356-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It appears that on Qualcomm's x1e CPU, CNTVOFF_EL2 doesn't really
work, specially with HCR_EL2.E2H=1.
A non-zero offset results in a screaming virtual timer interrupt,
to the tune of a few 100k interrupts per second on a 4 vcpu VM.
This is also evidenced by this CPU's inability to correctly run
any of the timer selftests.
The only case this doesn't break is when this register is set to 0,
which breaks VM migration.
When HCR_EL2.E2H=0, the timer seems to behave normally, and does
not result in an interrupt storm.
As a workaround, use the fact that this CPU implements FEAT_ECV,
and trap all accesses to the virtual timer and counter, keeping
CNTVOFF_EL2 set to zero, and emulate accesses to CVAL/TVAL/CTL
and the counter itself, fixing up the timer to account for the
missing offset.
And if you think this is disgusting, you'd probably be right.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Inject some sanity in CNTHCTL_EL2, ensuring that we don't handle
more than we advertise to the guest.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-11-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Allow a guest hypervisor to trap accesses to CNT{P,V}CT_EL02 by
propagating these trap bits to the host trap configuration.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-10-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
For completeness, fun, and cerebral meltdown, add the virtualisation
related traps to the counter and timers.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-9-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We already deal with CNTPCT_EL0 accesses in non-HYP context.
Let's add CNTVCT_EL0 as a good measure.
This is also an opportunity to simplify things and make it
plain that this code is only for non-HYP context handling.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-8-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Similarly to handling the physical timer accesses early when FEAT_ECV
causes a trap, we try to handle the physical counter without returning
to the general sysreg handling.
More surprisingly, we introduce something similar for the virtual
counter. Although this isn't necessary yet, it will prove useful on
systems that have a broken CNTVOFF_EL2 implementation. Yes, they exist.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Although FEAT_ECV allows us to correctly emulate the timers, it also
reduces performances pretty badly.
Mitigate this by emulating the CTL/CVAL register reads in the
inner run loop, without returning to the general kernel.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Although FEAT_NV2 makes most things fast, it also makes it impossible
to correctly emulate the timers, as the sysreg accesses are redirected
to memory.
FEAT_ECV addresses this by giving a hypervisor the ability to trap
the EL02 sysregs as well as the virtual timer.
Add the required trap setting to make use of the feature, allowing
us to elide the ugly resync in the middle of the run loop.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
With FEAT_NV2, the EL0 timer state is entirely stored in memory,
meaning that the hypervisor can only provide a very poor emulation.
The only thing we can really do is to publish the interrupt state
in the guest view of CNT{P,V}_CTL_EL0, and defer everything else
to the next exit.
Only FEAT_ECV will allow us to fix it, at the cost of extra trapping.
Suggested-by: Chase Conklin <chase.conklin@arm.com>
Suggested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Emulating the timers with FEAT_NV2 is a bit odd, as the timers
can be reconfigured behind our back without the hypervisor even
noticing. In the VHE case, that's an actual regression in the
architecture...
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add the required handling for EL2 and EL02 registers, as
well as EL1 registers used in the E2H context. This includes
handling the virtual timer accesses when CNTHCTL_EL2.EL1TVT
or CNTHCTL_EL2.EL1TVCT are set.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
* reported by Coverity ID 1602240
* ldev_info is always true, therefore the branch statement is never called.
Fixes: 081ff398c5 ("scsi: myrb: Add Mylex RAID controller (block interface)")
Cc: Hannes Reinecke <hare@kernel.org>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Link: https://lore.kernel.org/r/20241213225852.62741-2-ariel.otilibili-anieli@eurecom.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the code does:
if (x == 0) {
x &= ~0x3;
x |= 0x1;
}
Zeroing bits 0 and 1 of a variable that is 0 is not necessary. So directly
set the variable to 1.
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Fixes: f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20241212221817.78940-2-pmenzel@molgen.mpg.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Linux 5.15 logs the error below
mpt3sas_cm0: overriding NVDATA EEDPTagMode setting
on a Dell PowerEdge T440 with the card below.
5e:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] (rev 02)
It’s not clear to a user what this error is about. As a first step to
improve this, add the values to the error message.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20241212221817.78940-1-pmenzel@molgen.mpg.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
