The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-6-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-5-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-4-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-3-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-2-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20250710-sound-clk-round-rate-v1-1-4a9c3bb6ff3a@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based kernel configuration guards.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://patch.msgid.link/20250609-update_pm_macro-v1-1-819a53ef0eed@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix checkpatch error "CHECK: Blank lines aren't necessary before
a close brace '}'" in sdio_ops_linux.c:309.
Signed-off-by: Ana Oliveira <anac.amplar@gmail.com>
Link: https://lore.kernel.org/r/20250715112513.4541-1-anac.amplar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently all filesystems which implement super_operations::shutdown()
can not afford losing a device.
Thus fs_bdev_mark_dead() will just call the ->shutdown() callback for the
involved filesystem.
But it will no longer be the case, as multi-device filesystems like
btrfs and bcachefs can handle certain device loss without the need to
shutdown the whole filesystem.
To allow those multi-device filesystems to be integrated to use
fs_holder_ops:
- Add a new super_operations::remove_bdev() callback
- Try ->remove_bdev() callback first inside fs_bdev_mark_dead()
If the callback returned 0, meaning the fs can handling the device
loss, then exit without doing anything else.
If there is no such callback or the callback returned non-zero value,
continue to shutdown the filesystem as usual.
This means the new remove_bdev() should only do the check on whether the
operation can continue, and if so do the fs specific handlings.
The shutdown handling should still be handled by the existing
->shutdown() callback.
For all existing filesystems with shutdown callback, there is no change
to the code nor behavior.
Btrfs is going to implement both the ->remove_bdev() and ->shutdown()
callbacks soon.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Link: https://lore.kernel.org/09909fcff7f2763cc037fec97ac2482bdc0a12cb.1752470276.git.wqu@suse.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says:
The ti_hecc and tscan1 CAN drivers can not be built on an x86_64
platform. Add the COMPILE_TEST dependency to allow build testing.
Doing that, a so far unnoticed W=0 warning showed up in ti_hecc. Fix
this warning. To prevent any potential noise in some future git
bisect, the warning is fixed before introducing COMPILE_TEST.
Note that the mscan and mpc5xxx drivers have the same issue but those
two use some helper functions, such as in_8() and out_8(), which are
only available on the powerpc platform. Those two drivers would
require some deeper code refactor to be built on x86_64 and are thus
left out of scope.
Link: https://patch.msgid.link/20250715-can-compile-test-v2-0-f7fd566db86f@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ti_hecc depends on ARM. Add COMPILE_TEST to the dependency list so
that this driver can also be built on other platforms.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250715-can-compile-test-v2-2-f7fd566db86f@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Fix below default (W=0) warning:
drivers/net/can/ti_hecc.c: In function 'ti_hecc_start':
drivers/net/can/ti_hecc.c:386:20: warning: conversion from 'long unsigned int' to 'u32' {aka 'unsigned int'} changes value from '18446744073709551599' to '4294967279' [-Woverflow]
386 | mbx_mask = ~BIT(HECC_RX_LAST_MBOX);
| ^
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250715-can-compile-test-v2-1-f7fd566db86f@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Panfrost can skip the reset if TDR has fired before the free-job worker.
Currently, since Panfrost doesn't take any action on these scenarios, the
job is being leaked, considering that `free_job()` won't be called.
To avoid such leaks, inform the scheduler that the job did not actually
timeout and no reset was performed through the new status code
DRM_GPU_SCHED_STAT_NO_HANG.
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-8-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Xe can skip the reset if TDR has fired before the free job worker and can
also re-arm the timeout timer in some scenarios. Instead of manipulating
scheduler's internals, inform the scheduler that the job did not actually
timeout and no reset was performed through the new status code
DRM_GPU_SCHED_STAT_NO_HANG.
Note that, in the first case, there is no need to restart submission if it
hasn't been stopped.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-7-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Etnaviv can skip a hardware reset in two situations:
1. TDR has fired before the free-job worker and the timeout is spurious.
2. The GPU is still making progress on the front-end and we can give
the job a chance to complete.
Instead of manipulating scheduler's internals, inform the scheduler that
the job did not actually timeout and no reset was performed through
the new status code DRM_GPU_SCHED_STAT_NO_HANG.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-6-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
When a CL/CSD job times out, we check if the GPU has made any progress
since the last timeout. If so, instead of resetting the hardware, we skip
the reset and allow the timer to be rearmed. This gives long-running jobs
a chance to complete.
Instead of manipulating scheduler's internals, inform the scheduler that
the job did not actually timeout and no reset was performed through
the new status code DRM_GPU_SCHED_STAT_NO_HANG.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-5-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Add a test to submit a single job against a scheduler with the timeout
configured and verify that if the job is still running, the timeout
handler will skip the reset and allow the job to complete.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-4-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
As more KUnit tests are introduced to evaluate the basic capabilities of
the `timedout_job()` hook, the test suite will continue to increase in
duration. To reduce the overall running time of the test suite, decrease
the scheduler's timeout for the timeout tests.
Before this commit:
[15:42:26] Elapsed time: 15.637s total, 0.002s configuring, 10.387s building, 5.229s running
After this commit:
[15:45:26] Elapsed time: 9.263s total, 0.002s configuring, 5.168s building, 4.037s running
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-3-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
When the DRM scheduler times out, it's possible that the GPU isn't hung;
instead, a job just took unusually long (longer than the timeout) but is
still running, and there is, thus, no reason to reset the hardware. This
can occur in two scenarios:
1. The job is taking longer than the timeout, but the driver determined
through a GPU-specific mechanism that the hardware is still making
progress. Hence, the driver would like the scheduler to skip the
timeout and treat the job as still pending from then onward. This
happens in v3d, Etnaviv, and Xe.
2. Timeout has fired before the free-job worker. Consequently, the
scheduler calls `sched->ops->timedout_job()` for a job that isn't
timed out.
These two scenarios are problematic because the job was removed from the
`sched->pending_list` before calling `sched->ops->timedout_job()`, which
means that when the job finishes, it won't be freed by the scheduler
though `sched->ops->free_job()` - leading to a memory leak.
To solve these problems, create a new `drm_gpu_sched_stat`, called
DRM_GPU_SCHED_STAT_NO_HANG, which allows a driver to skip the reset. The
new status will indicate that the job must be reinserted into
`sched->pending_list`, and the hardware / driver will still complete that
job.
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-2-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Among the scheduler's statuses, the only one that indicates an error is
DRM_GPU_SCHED_STAT_ENODEV. Any status other than DRM_GPU_SCHED_STAT_ENODEV
signifies that the operation succeeded and the GPU is in a nominal state.
However, to provide more information about the GPU's status, it is needed
to convey more information than just "OK".
Therefore, rename DRM_GPU_SCHED_STAT_NOMINAL to
DRM_GPU_SCHED_STAT_RESET, which better communicates the meaning of this
status. The status DRM_GPU_SCHED_STAT_RESET indicates that the GPU has
hung, but it has been successfully reset and is now in a nominal state
again.
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-1-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
- cleanup of unsupported APIs
- add a API range per RF
- transport layer cleanups
- a few small fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCaHYfNAAKCRDacY7uyt+O
fRaKAQC66tvpxblh3WLvh3U2e/DAqzfHrAlvm7AmOCUbXU21gQEA8bm78T1DihDJ
cSu29gkfN37ly8+Oz+dph82mAOGCrgg=
=wf7j
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-2025-07-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi features, notably
- cleanup of unsupported APIs
- add a API range per RF
- transport layer cleanups
- a few small fixes
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Here are some more device ids for 6.16-rc7.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaHYKHAAKCRALxc3C7H1l
CFxHAP9HWsiKLcInAoXyfqfl8tPYYhQYzkzjh7+WB/nF4A2T7gD/SYcmPFtjDzYm
v0tV+py1PWllICujnR1CYKjk9EMJnQs=
=Afhj
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.16-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device ids for 6.16-rc7
Here are some more device ids for 6.16-rc7.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.16-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition
USB: serial: ftdi_sio: add support for NDI EMGUIDE GEMINI
Clears up the warning added in 7ee3647243 ("migrate: Remove call to
->writepage") that occurs in various xfstests, causing "something found
in dmesg" failures.
[ 341.136573] gfs2_meta_aops does not implement migrate_folio
[ 341.136953] WARNING: CPU: 1 PID: 36 at mm/migrate.c:944 move_to_new_folio+0x2f8/0x300
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
- missing unlock in error path
- Avoid FW assert on bad command values
- fix kernel panic due to incorrect index calculation
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCaHYdCwAKCRDacY7uyt+O
fcJ5AQDX1vLVwEKX6mbmkwO7LWTUdKBy+QG2/ccoyoHTX1kYOgD/UTDQ9i4/+EYs
Jdo0w1f/w86FXdDL8LOamGZulHEubAI=
=Q8S5
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-fixes-2025-07-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi-fixes
- missing unlock in error path
- Avoid FW assert on bad command values
- fix kernel panic due to incorrect index calculation
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The #address-cells and #size-cells properties are not useful on the DSI
controller node; they are only useful/required on ports and panel(s).
So remove them from the controller node and add them where actually
needed on the various rk3399 based boards.
This fixes the following DTB validation warnings:
unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-3-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The #address-cells and #size-cells properties are not useful on the DSI
controller node; they are only useful/required on ports and panel(s).
So remove them from the controller node and add them where actually
needed on the various px30 based boards, which includes rk3326.
This fixes the following DTB validation warnings:
unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Once we finish populating all leaf pages in the VF's LMTT we should
make sure that hardware will not access any stale data. Explicitly
force LMTT invalidation (as it was already planned in the past).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-7-michal.wajdeczko@intel.com
Invalidate LMTT immediately after removing VF's LMTT page tables
and clearing root PTE in the LMTT PD to avoid any invalid access
by the hardware (and VF) due to stale data.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-6-michal.wajdeczko@intel.com
By default the GuC starts in the 'native' mode and enables the VGT
mode (aka 'virtualization' mode) only after it receives at least one
set of VF configuration data. While this happens naturally while PF
begins VFs provisioning, we might need this sooner as some actions,
like TLB_INVALIDATION_ALL(0x7002), is supported by the GuC only in
the VGT mode.
And this becomes a real problem if we would want to use above action
to invalidate the LMTT early during VFs auto-provisioning, before VFs
are enabled, as such H2G would be rejected:
[ ] xe 0000:4d:00.0: [drm] *ERROR* GT0: FAST_REQ H2G fence 0x804e failed! e=0x30, h=0
[ ] xe 0000:4d:00.0: [drm] *ERROR* GT0: Fence 0x804e was used by action 0x7002 sent at:
h2g_write+0x33e/0x870 [xe]
__guc_ct_send_locked+0x1e1/0x1110 [xe]
guc_ct_send_locked+0x9f/0x740 [xe]
xe_guc_ct_send_locked+0x19/0x60 [xe]
send_tlb_invalidation+0xc2/0x470 [xe]
xe_gt_tlb_invalidation_all_async+0x45/0xa0 [xe]
xe_gt_tlb_invalidation_all+0x4b/0xa0 [xe]
lmtt_invalidate_hw+0x64/0x1a0 [xe]
xe_lmtt_invalidate_hw+0x5c/0x340 [xe]
pf_update_vf_lmtt+0x398/0xae0 [xe]
pf_provision_vf_lmem+0x350/0xa60 [xe]
xe_gt_sriov_pf_config_bulk_set_lmem+0xe2/0x410 [xe]
xe_gt_sriov_pf_config_set_fair_lmem+0x1c6/0x620 [xe]
xe_gt_sriov_pf_config_set_fair+0xd5/0x3f0 [xe]
xe_pci_sriov_configure+0x360/0x1200 [xe]
sriov_numvfs_store+0xbc/0x1d0
dev_attr_store+0x17/0x40
sysfs_kf_write+0x4a/0x80
kernfs_fop_write_iter+0x166/0x220
vfs_write+0x2ba/0x580
ksys_write+0x77/0x100
__x64_sys_write+0x19/0x30
x64_sys_call+0x2bf/0x2660
do_syscall_64+0x93/0x7a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ ] xe 0000:4d:00.0: [drm] *ERROR* GT0: CT dequeue failed: -71
[ ] xe 0000:4d:00.0: [drm] GT0: trying reset from receive_g2h [xe]
This could be mitigated by pushing earlier a PF self-configuration
with some hard-coded values that cover unlimited access to the GGTT,
use of all GuC contexts and doorbells. This step is sufficient for
the GuC to switch into the VGT mode.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-5-michal.wajdeczko@intel.com
In upcoming patch we will want to encode GGTT config KLVs based
on raw numbers, without relying on the allocated GGTT node.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-4-michal.wajdeczko@intel.com
If we reload the GuC due to suspend/resume or GT reset then we
have to resend not only any VFs provisioning data, but also PF
configuration, like scheduling parameters (EQ, PT), as otherwise
GuC will continue to use default values.
Fixes: 411220808c ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-3-michal.wajdeczko@intel.com
As part of the resume or GT reset, the PF driver schedules work
which is then used to complete restarting of the SR-IOV support,
including resending to the GuC configurations of provisioned VFs.
However, in case of short delay between those two actions, which
could be seen by triggering a GT reset on the suspened device:
$ echo 1 > /sys/kernel/debug/dri/0000:00:02.0/gt0/force_reset
this PF worker might be still busy, which lead to errors due to
just stopped or disabled GuC CTB communication:
[ ] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT0: resumed
[ ] xe 0000:00:02.0: [drm] GT0: trying reset from force_reset_show [xe]
[ ] xe 0000:00:02.0: [drm] GT0: reset queued
[ ] xe 0000:00:02.0: [drm] GT0: reset started
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel stopped
[ ] xe 0000:00:02.0: [drm:guc_ct_send_recv [xe]] GT0: H2G request 0x5503 canceled!
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 12 config KLVs (-ECANCELED)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 configuration (-ECANCELED)
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 12 config KLVs (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 configuration (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push 2 of 2 VFs configurations
[ ] xe 0000:00:02.0: [drm:pf_worker_restart_func [xe]] GT0: PF: restart completed
While this VFs reprovisioning will be successful during next spin
of the worker, to avoid those errors, make sure to cancel restart
worker if we are about to trigger next reset.
Fixes: 411220808c ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-2-michal.wajdeczko@intel.com
The "rockchip,dw-mipi-dsi" binding has allOf "snps,dw-mipi-dsi.yaml"
which has allOf "dsi-controller.yaml", which already has #address-cells
and #size-cells defined as '1' and '0' respectively.
So drop this re-definition.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250709132323.128757-4-didi.debian@cknow.org
Add documentation describing how to use AMD IOMMU debugfs support to
dump IOMMU data structures - IRT table, Device table, Registers (MMIO and
Capability) and command buffer.
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-9-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
In cases where we have an issue in the device interrupt path with IOMMU
interrupt remapping enabled, dumping valid IRT table entries for the device
is very useful and good input for debugging the issue.
eg.
-> To dump irte entries for a particular device
#echo "c4:00.0" > /sys/kernel/debug/iommu/amd/devid
#cat /sys/kernel/debug/iommu/amd/irqtbl | less
or
#echo "0000:c4:00.0" > /sys/kernel/debug/iommu/amd/devid
#cat /sys/kernel/debug/iommu/amd/irqtbl | less
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-8-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
IOMMU uses device table data structure to get per-device information for
DMA remapping, interrupt remapping, and other functionalities. It's a
valuable data structure to visualize for debugging issues related to
IOMMU.
eg.
-> To dump device table entry for a particular device
#echo 0000:c4:00.0 > /sys/kernel/debug/iommu/amd/devid
#cat /sys/kernel/debug/iommu/amd/devtbl
or
#echo c4:00.0 > /sys/kernel/debug/iommu/amd/devid
#cat /sys/kernel/debug/iommu/amd/devtbl
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-7-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Dumping IOMMU data structures like device table, IRT, etc., for all devices
on the system will be a lot of data dumped in a file. Also, user may want
to dump and analyze these data structures just for one or few devices. So
dumping IOMMU data structures like device table, IRT etc for all devices
is not a good approach.
Add "device id" user input to be used for dumping IOMMU data structures
like device table, IRT etc in AMD IOMMU debugfs.
eg.
1. # echo 0000:01:00.0 > /sys/kernel/debug/iommu/amd/devid
# cat /sys/kernel/debug/iommu/amd/devid
Output : 0000:01:00.0
2. # echo 01:00.0 > /sys/kernel/debug/iommu/amd/devid
# cat /sys/kernel/debug/iommu/amd/devid
Output : 0000:01:00.0
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-6-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
IOMMU driver sends command to IOMMU hardware via command buffer. In cases
where IOMMU hardware fails to process commands in command buffer, dumping
it is a valuable input to debug the issue.
IOMMU hardware processes command buffer entry at offset equals to the head
pointer. Dumping just the entry at the head pointer may not always be
useful. The current head may not be pointing to the entry of the command
buffer which is causing the issue. IOMMU Hardware may have processed the
entry and updated the head pointer. So dumping the entire command buffer
gives a broad understanding of what hardware was/is doing. The command
buffer dump will have all entries from start to end of the command buffer.
Along with that, it will have a head and tail command buffer pointer
register dump to facilitate where the IOMMU driver and hardware are in
the command buffer for injecting and processing the entries respectively.
Command buffer is a per IOMMU data structure. So dumping on per IOMMU
basis.
eg.
-> To get command buffer dump for iommu<x> (say, iommu00)
#cat /sys/kernel/debug/iommu/amd/iommu00/cmdbuf
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-5-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
IOMMU Capability registers defines capabilities of IOMMU and information
needed for initialising MMIO registers and device table. This is useful
to dump these registers for debugging IOMMU related issues.
e.g.
-> To get capability registers value at offset 0x10 for iommu<x> (say,
iommu00)
# echo "0x10" > /sys/kernel/debug/iommu/amd/iommu00/capability
# cat /sys/kernel/debug/iommu/amd/iommu00/capability
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-4-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Analyzing IOMMU MMIO registers gives a view of what IOMMU is
configured with on the system and is helpful to debug issues
with IOMMU.
eg.
-> To get mmio registers value at offset 0x18 for iommu<x> (say, iommu00)
# echo "0x18" > /sys/kernel/debug/iommu/amd/iommu00/mmio
# cat /sys/kernel/debug/iommu/amd/iommu00/mmio
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-3-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Rearrange initial setup of AMD IOMMU debugfs to segregate per IOMMU
setup and setup which is common for all IOMMUs. This ensures that common
debugfs paths (introduced in subsequent patches) are created only once
instead of being created for each IOMMU.
With the change, there is no need to use lock as amd_iommu_debugfs_setup()
will be called only once during AMD IOMMU initialization. So remove lock
acquisition in amd_iommu_debugfs_setup().
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250702093804.849-2-dheerajkumar.srivastava@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Trying to use UART2 DMA for Bluetooth on ArmSoM Sige1 result in tx
timeout when using dma-names = "tx", "rx" as required by the dt-binding:
Bluetooth: hci0: command 0x0c03 tx timeout
Bluetooth: hci0: BCM: Reset failed (-110)
Change the dmas order to fix UART DMA support on RK3528.
With this fixed Bluetooth can be loaded using DMA on ArmSoM Sige1:
Bluetooth: hci0: BCM: chip id 159
Bluetooth: hci0: BCM: features 0x0f
Bluetooth: hci0: BCM4362A2
Bluetooth: hci0: BCM4362A2 (000.017.017) build 0000
Bluetooth: hci0: BCM4362A2 'brcm/BCM4362A2.hcd' Patch
Bluetooth: hci0: BCM: features 0x0f
Bluetooth: hci0: BCM43752A2 UART 37.4MHz Ampak AP6398 sLNA iLNA CL1 [Version: 1091.1173]
Bluetooth: hci0: BCM4362A2 (000.017.017) build 1173
Fixes: ab6fcb58ae ("arm64: dts: rockchip: Add UART DMA support for RK3528")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250709210831.3170458-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NanoPi R5S LTS version has a reset button, which is connected via
GPIO. Note that the non-LTS version does not have the reset button and
therefore on page 19 of the schematic version 2204 it is marked 'NC',
but it is connected on the LTS version.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250711142138.197445-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RTC_HCTOSYS_DEVICE module defaults to rtc0 and should (highly)
preferable be assigned to a battery backed RTC module as it is used to
(re)initialize the system clock.
The R5S and R5C have a connector for a RTC battery which is used by
HYM8563 RTC. Both devices also have another RTC from the rk809 PMIC.
To make sure the HYM8563 is always assigned rtc0, add an alias for it.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250713161723.270963-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Matt Johnston says:
====================
net: mctp: Improved bind handling
This series improves a couple of aspects of MCTP bind() handling.
MCTP wasn't checking whether the same MCTP type was bound by multiple
sockets. That would result in messages being received by an arbitrary
socket, which isn't useful behaviour. Instead it makes more sense to
have the duplicate binds fail, the same as other network protocols.
An exception is made for more-specific binds to particular MCTP
addresses.
It is also useful to be able to limit a bind to only receive incoming
request messages (MCTP TO bit set) from a specific peer+type, so that
individual processes can communicate with separate MCTP peers. One
example is a PLDM firmware update requester, which will initiate
communication with a device, and then the device will connect back to the
requester process.
These limited binds are implemented by a connect() call on the socket
prior to bind. connect() isn't used in the general case for MCTP, since
a plain send() wouldn't provide the required MCTP tag argument for
addressing.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
====================
Link: https://patch.msgid.link/20250710-mctp-bind-v4-0-8ec2f6460c56@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
