Prepare for the next patch that tracks cookies between iterations by
converting struct sock **batch to union bpf_tcp_iter_batch_item *batch
inside struct bpf_tcp_iter_state.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Get rid of the st_bucket_done field to simplify TCP iterator state and
logic. Before, st_bucket_done could be false if bpf_iter_tcp_batch
returned a partial batch; however, with the last patch ("bpf: tcp: Make
sure iter->batch always contains a full bucket snapshot"),
st_bucket_done == true is equivalent to iter->cur_sk == iter->end_sk.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Require that iter->batch always contains a full bucket snapshot. This
invariant is important to avoid skipping or repeating sockets during
iteration when combined with the next few patches. Before, there were
two cases where a call to bpf_iter_tcp_batch may only capture part of a
bucket:
1. When bpf_iter_tcp_realloc_batch() returns -ENOMEM.
2. When more sockets are added to the bucket while calling
bpf_iter_tcp_realloc_batch(), making the updated batch size
insufficient.
In cases where the batch size only covers part of a bucket, it is
possible to forget which sockets were already visited, especially if we
have to process a bucket in more than two batches. This forces us to
choose between repeating or skipping sockets, so don't allow this:
1. Stop iteration and propagate -ENOMEM up to userspace if reallocation
fails instead of continuing with a partial batch.
2. Try bpf_iter_tcp_realloc_batch() with GFP_USER just as before, but if
we still aren't able to capture the full bucket, call
bpf_iter_tcp_realloc_batch() again while holding the bucket lock to
guarantee the bucket does not change. On the second attempt use
GFP_NOWAIT since we hold onto the spin lock.
I did some manual testing to exercise the code paths where GFP_NOWAIT is
used and where ERR_PTR(err) is returned. I used the realloc test cases
included later in this series to trigger a scenario where a realloc
happens inside bpf_iter_tcp_batch and made a small code tweak to force
the first realloc attempt to allocate a too-small batch, thus requiring
another attempt with GFP_NOWAIT. Some printks showed both reallocs with
the tests passing:
Jun 27 00:00:53 crow kernel: again GFP_USER
Jun 27 00:00:53 crow kernel: again GFP_NOWAIT
Jun 27 00:00:53 crow kernel: again GFP_USER
Jun 27 00:00:53 crow kernel: again GFP_NOWAIT
With this setup, I also forced each of the bpf_iter_tcp_realloc_batch
calls to return -ENOMEM to ensure that iteration ends and that the
read() in userspace fails.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Prepare for the next patch which needs to be able to choose either
GFP_USER or GFP_NOWAIT for calls to bpf_iter_tcp_realloc_batch.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Add a KUnit test suite for the SHA-1 library functions, including the
corresponding HMAC support. The core test logic is in the
previously-added hash-test-template.h. This commit just adds the actual
KUnit suite, and it adds the generated test vectors to the tree so that
gen-hash-testvecs.py won't have to be run at build time.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-16-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a KUnit test suite for the Poly1305 functions. Most of its test
cases are instantiated from hash-test-template.h, which is also used by
the SHA-2 tests. A couple additional test cases are also included to
test edge cases specific to Poly1305.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add KUnit test suites for the SHA-384 and SHA-512 library functions,
including the corresponding HMAC support. The core test logic is in the
previously-added hash-test-template.h. This commit just adds the actual
KUnit suites, and it adds the generated test vectors to the tree so that
gen-hash-testvecs.py won't have to be run at build time.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add KUnit test suites for the SHA-224 and SHA-256 library functions,
including the corresponding HMAC support. The core test logic is in the
previously-added hash-test-template.h. This commit just adds the actual
KUnit suites, and it adds the generated test vectors to the tree so that
gen-hash-testvecs.py won't have to be run at build time.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add hash-test-template.h which generates the following KUnit test cases
for hash functions:
test_hash_test_vectors
test_hash_all_lens_up_to_4096
test_hash_incremental_updates
test_hash_buffer_overruns
test_hash_overlaps
test_hash_alignment_consistency
test_hash_ctx_zeroization
test_hash_interrupt_context_1
test_hash_interrupt_context_2
test_hmac (when HMAC is supported)
benchmark_hash (when CONFIG_CRYPTO_LIB_BENCHMARK=y)
The initial use cases for this will be sha224_kunit, sha256_kunit,
sha384_kunit, sha512_kunit, and poly1305_kunit.
Add a Python script gen-hash-testvecs.py which generates the test
vectors required by test_hash_test_vectors,
test_hash_all_lens_up_to_4096, and test_hmac.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250709200112.258500-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
fsverity supports two hash algorithms: SHA-256 and SHA-512. Since both
of these have a library API now, just use the library API instead of
crypto_shash. Even with multiple algorithms, the library-based code
still ends up being quite a bit simpler, due to how clumsy the
old-school crypto API is. The library-based code is also more
efficient, since it avoids overheads such as indirect calls.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630172224.46909-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
This user of SHA-256 does not support any other algorithm, so the
crypto_shash abstraction provides no value. Just use the SHA-256
library API instead, which is much simpler and easier to use.
Acked-by: John Johansen <john.johansen@canonical.com>
Link: https://lore.kernel.org/r/20250630174805.59010-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the x86-optimized SHA-1 code via x86-specific
crypto_shash algorithms, instead just implement the sha1_blocks()
library function. This is much simpler, it makes the SHA-1 library
functions be x86-optimized, and it fixes the longstanding issue where
the x86-optimized SHA-1 code was disabled by default. SHA-1 still
remains available through crypto_shash, but individual architectures no
longer need to handle it.
To match sha1_blocks(), change the type of the nblocks parameter of the
assembly functions from int to size_t. The assembly functions actually
already treated it as size_t.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-14-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Update the IIO ABI documentation to reflect the actual usage of channels
with I and Q modifiers. These are currently only used in a few drivers:
frequency/admv1013 (kernel v5.17):
- in_altvoltageY-altvoltageZ_i_calibphase
- in_altvoltageY-altvoltageZ_q_calibphase
- in_altvoltageY_i_calibbias
- in_altvoltageY_q_calibbias
frequency/admv1014 (kernel v5.18):
- in_altvoltageY_i_phase
- in_altvoltageY_q_phase
- in_altvoltageY_i_offset
- in_altvoltageY_q_offset
- in_altvoltageY_i_calibscale_course
- in_altvoltageY_i_calibscale_fine
- in_altvoltageY_q_calibscale_course
- in_altvoltageY_q_calibscale_fine
frequency/adrf6780 (kernel v5.16):
- out_altvoltageY_i_phase
- out_altvoltageY_q_phase
There are no _raw or _scale attributes in use, so those are all removed.
There are no currentY attributes in use with these modifiers, so those
are also removed. All of the voltageY are changed to altvoltageY since
that is how they are actually used. None of these channels are used
with scan buffers, so all of those attributes are removed as well. And
the {in,out}_altvoltageY_{i,q}_phase attributes were missing so those
are added.
The differential channel names for admv1013 are fixed.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250711-iio-abi-fix-i-and-q-modifiers-v1-1-35963c9c8c01@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Nicera D3-323-AA is a PIR sensor for human detection. It has support for
raw data measurements and detection notification. The communication
protocol is custom made and therefore needs to be GPIO bit banged.
The device has two main settings that can be configured: a threshold
value for detection and a band-pass filter. The configurable parameters
for the band-pass filter are the high-pass and low-pass cutoff
frequencies and its peak gain. Map these settings to the corresponding
parameters in the `iio` framework.
Raw data measurements can be obtained from the device. However, since we
rely on bit banging, it will be rather cumbersome with buffer support.
The main reason being that the data protocol has strict timing
requirements (it's serial like UART), and it's mainly used during
debugging since in real-world applications only the event notification
is of importance. Therefore, only add support for events (for now).
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/29f84da1431f4a3f17fdeef27297a4ab14455404.1751636734.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Nicera (Nippon Ceramic Co.) is a manufacturer of a wide range of
sensors. For example infrared, ultrasonic, gas sensors and much more.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/b52e82aa312a52c03d2b6c58cf329884d1829d29.1751636734.git.waqar.hameed@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Driver is getting clock and almost immediately enabling it, with no
relevant code executed between, thus the probe path and cleanups can be
simplified with devm_clk_get_enabled().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250713-iio-clk-get-enabled-v1-4-70abc1f9ce6c@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use dev_err_probe() to make error code handling simpler and handle
deferred probe nicely (avoid spamming logs).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250713-iio-clk-get-enabled-v1-3-70abc1f9ce6c@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add const qualifier to struct bno055_sysfs_attr and its array fields.
All of this is read-only data so it can be made const.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250709-iio-const-data-19-v2-2-fb3fc9191251@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix a potential out-of-bounds array access of the hw_xlate array in
bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the
vals array instead of the length of the hw_xlate array. In the case of
bno055_gyr_scale, the vals array is larger than the hw_xlate array,
so this could result in an out-of-bounds access. In practice, this
shouldn't happen though because a match should always be found which
breaks out of the for loop before it iterates beyond the end of the
hw_xlate array.
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be
sure we are iterating over the correct length.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507100510.rGt1YOOx-lkp@intel.com/
Fixes: 4aefe1c2bd ("iio: imu: add Bosch Sensortec BNO055 core driver")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250709-iio-const-data-19-v2-1-fb3fc9191251@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The temperature sensor in the MT7981 is same as in the MT7986.
Add compatible string for mt7981.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250708220405.1072393-2-olek2@wp.pl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Motivated by the W=1 warning about export.h that was introduced this cycle
this is an attempt to apply an approximation of the principles of including
whatever is used in the file directly.
Helped by the include-what-you-use tool.
Reasoning:
- Drop linux/moduleparam.h as completely unused.
- linux/array_size.h for ARRAY_SIZE()
- linux/bitmap.h for for_each_set_bit
- linux/errno.h for error codes.
- linux/export.h for EXPORT_SYMBOL*()
- linux/math64.h for do_div - alternative would be asm/div64.h
- linux/minmax.h for min()
- linux/sysfs.h for sysfs_emit()
- linux/time64.h for USEC_PER_MSEC
- linux/iio/buffer.h for iio_push_to_buffers_with_timestamp()
- asm/byteorder.h for le16_to_cpu()
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250629183649.184479-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 design provides features to aid interfacing with weigh scales,
thermocouples, and RTD sensors, which are set up with additional circuitry
for proper sensor operation. A key characteristic of those sensors is that
the circuit they are in must be excited with a single, a pair, or two pairs
of signals. The external circuit can be excited either by a voltage supply
or by AD4170-4 excitation signals. The sensor can then be read through a
different pair of lines that are connected to the AD4170-4 ADC.
Extend the ad4170-4 driver to handle external circuit sensors.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/52686943040ecad34cc89833d4d5d37f1a51f412.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 has an internal temperature sensor that can be read using the
ADC. Whenever possible, configure an IIO channel to provide the chip's
temperature.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/71ac994060cf79a6c49f39b0c7d04c6c9cbbab00.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 has four multifunctional pins that can be used as GPIOs. The
GPIO functionality can be accessed when the AD4170-4 chip is not busy
performing continuous data capture or handling any other register
read/write request. Also, the AD4170-4 does not provide any interrupt based
on GPIO pin states so AD4170-4 GPIOs can't be used as interrupt sources.
Implement gpio_chip callbacks to make AD4170-4 GPIO pins controllable
through the gpiochip interface.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/e031189d4b7e20cf02dd13220ab1ddf4798760c2.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 chip can use an externally supplied clock at the XTAL2 pin, or
an external crystal connected to the XTAL1 and XTAL2 pins. Alternatively,
the AD4170-4 can provide its 16 MHz internal clock at the XTAL2 pin. In
addition, the chip has a programmable clock divider that allows dividing
the external or internal clock frequency, however, control for that is not
provided in this patch. Extend the AD4170-4 driver so it effectively uses
the provided external clock, if any, or supplies its own clock as a clock
provider.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/68697c7613b1a69d752e541caef28d08b3e59bc1.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extend the AD4170-4 driver to allow buffered data capture in continuous
read mode. In continuous read mode, the chip skips the instruction phase
and outputs just ADC sample data, enabling faster sample rates to be
reached. The internal channel sequencer always starts sampling from channel
0 and channel 0 must be enabled if more than one channel is selected for
data capture. The scan mask validation callback checks if the
aforementioned condition is met.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/10ed544d31aa86eb40f93ea947f151d3d9827952.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD4170-4 is a multichannel, low noise, 24-bit precision sigma-delta
analog to digital converter. The AD4170-4 design offers a flexible data
acquisition solution with crosspoint multiplexed analog inputs,
configurable ADC voltage reference inputs, ultra-low noise integrated PGA,
digital filtering, wide range of configurable output data rates, internal
oscillator and temperature sensor, four GPIOs, and integrated features for
interfacing with load cell weigh scales, RTD, and thermocouple sensors.
Add basic support for the AD4170-4 ADC with the following features:
- Single-shot read.
- Analog front end PGA configuration.
- Differential and pseudo-differential input configuration.
Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
Co-developed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/ce3fd150bd63a2aed6eb6fe59aad6d60c0f9fb67.1751895245.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move all DMA aligned buffers together at the end of the structure.
1. Timestamp anynomous structure is not used with DMA so it doesn't
belong after __aligned(IIO_DMA_MINALIGN).
2. struct inv_icm42600_fifo contains it's own __aligned(IIO_DMA_MINALIGN)
within it at the end so it should not be after __aligned(IIO_DMA_MINALIGN)
in the outer struct either.
3. Normally 1 would have been considered a bug, but because of the extra
alignment from 2, it actually was OK, but we shouldn't be relying on such
quirks.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250630-losd-3-inv-icm42600-add-wom-support-v6-1-5bb0c84800d9@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Bulk FIFO reading can be streamlined by eliminating redundant variables and
simplifying the process of reading x-, y-, and z-axis measurement sets.
This is a refactoring change with no expected impact on functionality.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250702230315.19297-3-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor the sensor interrupt mapping by utilizing regmap_assign_bits(),
which accepts a boolean value directly. Introduce a helper function to
streamline the identification of the configured interrupt line pin. Also,
use identifiers from units.h to represent the full 8-bit register when
setting bits.
This is a purely refactoring change and does not affect functionality.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230315.19297-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add documentation for the ADXL313 accelerometer driver.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250702230819.19353-9-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of exposing the sparc-optimized SHA-1 code via sparc-specific
crypto_shash algorithms, instead just implement the sha1_blocks()
library function. This is much simpler, it makes the SHA-1 library
functions be sparc-optimized, and it fixes the longstanding issue where
the sparc-optimized SHA-1 code was disabled by default. SHA-1 still
remains available through crypto_shash, but individual architectures no
longer need to handle it.
Note: to see the diff from arch/sparc/crypto/sha1_glue.c to
lib/crypto/sparc/sha1.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the s390-optimized SHA-1 code via s390-specific
crypto_shash algorithms, instead just implement the sha1_blocks()
library function. This is much simpler, it makes the SHA-1 library
functions be s390-optimized, and it fixes the longstanding issue where
the s390-optimized SHA-1 code was disabled by default. SHA-1 still
remains available through crypto_shash, but individual architectures no
longer need to handle it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the powerpc-optimized SHA-1 code via
powerpc-specific crypto_shash algorithms, instead just implement the
sha1_blocks() library function. This is much simpler, it makes the
SHA-1 library functions be powerpc-optimized, and it fixes the
longstanding issue where the powerpc-optimized SHA-1 code was disabled
by default. SHA-1 still remains available through crypto_shash, but
individual architectures no longer need to handle it.
Note: to see the diff from arch/powerpc/crypto/sha1-spe-glue.c to
lib/crypto/powerpc/sha1.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the mips-optimized SHA-1 code via mips-specific
crypto_shash algorithms, instead just implement the sha1_blocks()
library function. This is much simpler, it makes the SHA-1 library
functions be mips-optimized, and it fixes the longstanding issue where
the mips-optimized SHA-1 code was disabled by default. SHA-1 still
remains available through crypto_shash, but individual architectures no
longer need to handle it.
Note: to see the diff from arch/mips/cavium-octeon/crypto/octeon-sha1.c
to lib/crypto/mips/sha1.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the arm64-optimized SHA-1 code via arm64-specific
crypto_shash algorithms, instead just implement the sha1_blocks()
library function. This is much simpler, it makes the SHA-1 library
functions be arm64-optimized, and it fixes the longstanding issue where
the arm64-optimized SHA-1 code was disabled by default. SHA-1 still
remains available through crypto_shash, but individual architectures no
longer need to handle it.
Remove support for SHA-1 finalization from assembly code, since the
library does not yet support architecture-specific overrides of the
finalization. (Support for that has been omitted for now, for
simplicity and because usually it isn't performance-critical.)
To match sha1_blocks(), change the type of the nblocks parameter and the
return value of __sha1_ce_transform() from int to size_t. Update the
assembly code accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the arm-optimized SHA-1 code via arm-specific
crypto_shash algorithms, instead just implement the sha1_blocks()
library function. This is much simpler, it makes the SHA-1 library
functions be arm-optimized, and it fixes the longstanding issue where
the arm-optimized SHA-1 code was disabled by default. SHA-1 still
remains available through crypto_shash, but individual architectures no
longer need to handle it.
To match sha1_blocks(), change the type of the nblocks parameter of the
assembly functions from int to size_t. The assembly functions actually
already treated it as size_t.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The RDMA driver needs to map its own MMIO regions for the sake of
performance, meaning the IDPF needs to avoid mapping portions of the BAR
space. However, to be HW agnostic, the IDPF cannot assume where
these are and must avoid mapping hard coded regions as much as possible.
The IDPF maps the bare minimum to load and communicate with the
control plane, i.e., the mailbox registers and the reset state
registers. Because of how and when mailbox register offsets are
initialized, it is easier to adjust the existing defines to be relative
to the mailbox region starting address. Use a specific mailbox register
write function that uses these relative offsets. The reset state
register addresses are calculated the same way as for other registers,
described below.
The IDPF then calls a new virtchnl op to fetch a list of MMIO regions
that it should map. The addresses for the registers in these regions are
calculated by determining what region the register resides in, adjusting
the offset to be relative to that region, and then adding the
register's offset to that region's mapped address.
If the new virtchnl op is not supported, the IDPF will fallback to
mapping the whole bar. However, it will still map them as separate
regions outside the mailbox and reset state registers. This way we can
use the same logic in both cases to access the MMIO space.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
