The only event an RDMA vport aux driver cares about right now is an MTU
change on its underlying vport. Implement and plumb the handler to
signal the pre MTU change event and post MTU change events to the RDMA
vport aux driver.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement the idpf_idc_request_reset and idpf_idc_rdma_vc_send_sync
callbacks for the rdma core auxiliary driver to issue reset events to
the idpf and send (synchronous) virtchnl messages to the control plane
respectively.
Implement and plumb the reset handler for the opposite flow as well,
i.e. when the idpf is resetiing and needs to notify the rdma core
auxiliary driver.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement the functions to create, initialize, and destroy an RDMA vport
auxiliary device. The vport aux dev creation is dependent on the
core aux device to call idpf_idc_vport_dev_ctrl to signal that it is
ready for vport aux devices. Implement that core callback to either
create and initialize the vport aux dev or deinitialize.
RDMA vport aux dev creation is also dependent on the control plane to
tell us the vport is RDMA enabled. Add a flag in the create vport
message to signal individual vport RDMA capabilities.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the initial idpf_idc.c file with the functions to kick off the IDC
initialization, create and initialize a core RDMA auxiliary device, and
destroy said device.
The RDMA core has a dependency on the vports being created by the
control plane before it can be initialized. Therefore, once all the
vports are up after a hard reset (either during driver load a function
level reset), the core RDMA device info will be created. It is populated
with the function type (as distinguished by the IDC initialization
function pointer), the core idc_ops function points (just stubs for
now), the reserved RDMA MSIX table, and various other info the core RDMA
auxiliary driver will need. It is then plugged on to the bus.
During a function level reset or driver unload, the device will be
unplugged from the bus and destroyed.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fetch the number of reserved RDMA vectors from the control plane.
Adjust the number of reserved LAN vectors if necessary. Adjust the
minimum number of vectors the OS should reserve to include RDMA; and
fail if the OS cannot reserve enough vectors for the minimum number of
LAN and RDMA vectors required. Create a separate msix table for the
reserved RDMA vectors, which will just get handed off to the RDMA core
device to do with what it will.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Cannot confirm which variant exactly it is, as the EDID alphanumeric data
contains '0RGNR' <0x80> 'NE14QDM' and ends there; but it's 60 Hz and with
touch.
I do not have access to datasheets for these panels, so the timing is
a guess that was tested to work fine on this laptop.
Raw EDID dump:
00 ff ff ff ff ff ff 00 09 e5 1e 0b 00 00 00 00
10 20 01 04 a5 1e 13 78 07 fd 85 a7 53 4c 9b 25
0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 a7 6d 00 a0 a0 40 78 60 30 20
36 00 2e bc 10 00 00 1a b9 57 00 a0 a0 40 78 60
30 20 36 00 2e bc 10 00 00 1a 00 00 00 fe 00 30
52 47 4e 52 80 4e 45 31 34 51 44 4d 00 00 00 00
00 02 41 31 a8 00 01 00 00 1a 41 0a 20 20 00 8f
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250706205723.9790-7-val@packett.cool
Detect the result of starting old governor in cpufreq_set_policy(). If it
fails, exit the governor and clear policy->governor.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250709104145.2348017-5-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the check of cpufreq_driver->get into cpufreq_verify_current_freq() in
case of calling it without check.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250709104145.2348017-4-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In cpufreq_policy_put_kobj(), policy->rwsem is used. But in
cpufreq_policy_alloc(), if freq_qos_add_notifier() returns an error, error
path via err_kobj_remove or err_min_qos_notifier will be reached and
cpufreq_policy_put_kobj() will be called before policy->rwsem is
initialized. Thus, the calling of init_rwsem() should be moved to where
before these two error paths can be reached.
Fixes: 67d874c3b2 ("cpufreq: Register notifiers with the PM QoS framework")
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250709104145.2348017-3-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq-based invariance is enabled in cpufreq_register_driver(),
but never disabled after registration fails. Move the invariance
initialization to where all other initializations have been successfully
done to solve this problem.
Fixes: 874f635310 ("cpufreq: report whether cpufreq supports Frequency Invariance (FI)")
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250709104145.2348017-2-zhenglifeng1@huawei.com
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The has_target() checks in __cpufreq_offline() are duplicate.
Remove one of them and put the operations of exiting governor together
with storing last governor's name.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250623133402.3120230-5-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit c034b02e21 ("cpufreq: expose scaling_cur_freq sysfs file
for set_policy() drivers"), the file scaling_cur_freq is exposed to all
drivers.
No need to create this file separately. It's better to be contained in
cpufreq_attrs.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250623133402.3120230-4-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Users may disable HWP in firmware, in which case intel_pstate
wouldn't load unless the CPU model is explicitly supported.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20250623105601.3924-1-lirongqing@baidu.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the passive mode, intel_cpufreq_update_pstate() sets HWP_MIN_PERF in
accordance with the target frequency to ensure delivering adequate
performance, but it sets HWP_DESIRED_PERF to 0, so the processor has no
indication that the desired performance level is actually equal to the
floor one. This may cause it to choose a performance point way above
the desired level.
Moreover, this is inconsistent with intel_cpufreq_adjust_perf() which
actually sets HWP_DESIRED_PERF in accordance with the target performance
value.
Address this by adjusting intel_cpufreq_update_pstate() to pass
target_pstate as both the minimum and the desired performance levels
to intel_cpufreq_hwp_update().
Fixes: a365ab6b9d ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Link: https://patch.msgid.link/6173276.lOV4Wx5bFT@rjwysocki.net
Minor clean up. Instead of dprintk there are appropriate error codes.
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The return value of sock_sendmsg() is signed, and svc_tcp_sendto() wants
a signed value to return.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This shrinks the struct by 4 bytes, but also takes it from 19 to 18
cachelines on x86_64.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This ends up returning AUTH_BADCRED when memory allocation fails today.
Fix it to return AUTH_FAILED, which better indicates a failure on the
server.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
rq_accept_statp should point to the location of the accept_status in the
reply. This field is not reset between RPCs so if svc_authenticate or
pg_authenticate return SVC_DENIED without setting the pointer, it could
result in the status being written to the wrong place.
This pointer starts its lifetime as NULL. Reset it on every iteration
so we get consistent behavior if this happens.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In the case of an unknown error code from svc_authenticate or
pg_authenticate, return AUTH_ERROR with a status of AUTH_FAILED. Also
add the other auth_stat value from RFC 5531, and document all the status
codes.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Compilers are allowed to insert padding and reorder the
fields in a struct, so using a union of an array and a
struct in struct knfsd_fh is not reliable.
The position of elements in an array is more reliable.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I'm about to remove the union in struct knfsd_fh. First step is to
add an accessor function for the file handle's fsid portion.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In the past several kernel releases, we've made NFSv4.2 async copy
reliable:
- The Linux NFS client and server now both implement and use the
NFSv4.2 OFFLOAD_STATUS operation
- The Linux NFS server keeps copy stateids around longer
- The Linux NFS client and server now both implement referring call
lists
And resilient against DoS:
- The Linux NFS server limits the number of concurrent async copy
operations
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Replace flexible-array member with a fixed-size array.
With this changes, fix many instances of the following type of
warnings:
fs/nfsd/nfsfh.h:79:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/nfsd/state.h:763:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/nfsd/state.h:669:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/nfsd/state.h:549:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/nfsd/xdr4.h:705:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/nfsd/xdr4.h:678:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Enable the use of IOCB flags to control NFSD's individual
write operations. This allows the eventual use of atomic, uncached,
direct, or asynchronous writes.
Suggested-by: NeilBrown <neil@brown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor: Enable the use of IOCB flags to control NFSD's individual
read operations (when not using splice). This allows the eventual
use of atomic, uncached, direct, or asynchronous reads.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Sparse reports that the synopsis of nfsd_open_local_fh() does not
match its kdoc comment. Introduced by commit e6f7e1487a
("nfs_localio: simplify interface to nfsd for getting nfsd_file").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Sparse reports that the synopsis of nfsd_file_put_local() does not
match its kdoc comment. Introduced by commit c25a89770d ("nfs_localio:
change nfsd_file_put_local() to take a pointer to __rcu pointer") .
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
trace_nfsd_ctl_maxconn() was removed by commit a4b853f183
("sunrpc: remove all connection limit configuration") but did not
remove the event.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/linux-nfs/5ccae2f9-1560-4ac5-b506-b235ed4e4f4f@oracle.com/T/#t
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Events nfsd_file_lru_add_disposed and nfsd_file_lru_del_disposed
were added by commit 4a0e73e635 ("NFSD: Leave open files out of
the filecache LRU") but they were never used.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/linux-nfs/5ccae2f9-1560-4ac5-b506-b235ed4e4f4f@oracle.com/T/#t
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Update error codes in decoding functions of block and scsi layout
drivers to match the core nfsd code. NFS4ERR_EINVAL means that the
server was able to decode the request, but the decoded values are
invalid. Use NFS4ERR_BADXDR instead to indicate a decoding error.
And ENOMEM is changed to nfs code NFS4ERR_DELAY.
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This limit has always been a sanity check; in nearly all cases a
large COMPOUND is a sign of a malfunctioning client. The only real
limit on COMPOUND size and complexity is the size of NFSD's send
and receive buffers.
However, there are a few cases where a large COMPOUND is sane. For
example, when a client implementation wants to walk down a long file
pathname in a single round trip.
A small risk is that now a client can construct a COMPOUND request
that can keep a single nfsd thread busy for quite some time.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
To enable NFSD to handle NFSv4 COMPOUNDs of unrestricted size,
resize the array in struct nfsd_genl_rqstp so it saves only up to
16 operations per COMPOUND.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: A function parameter called "rqstp" typically refers to an
object of type "struct svc_rqst", so it's confusing when such an
parameter refers to a different struct type with field names that are
very similar to svc_rqst.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When the client sends an OPEN with claim type CLAIM_DELEG_CUR_FH or
CLAIM_DELEGATION_CUR, the delegation stateid and the file handle
must belong to the same file, otherwise return NFS4ERR_INVAL.
Note that RFC8881, section 8.2.4, mandates the server to return
NFS4ERR_BAD_STATEID if the selected table entry does not match the
current filehandle. However returning NFS4ERR_BAD_STATEID in the
OPEN causes the client to retry the operation and therefor get the
client into a loop. To avoid this situation we return NFS4ERR_INVAL
instead.
Reported-by: Petro Pavlov <petro.pavlov@vastdata.com>
Fixes: c44c5eeb2c ("[PATCH] nfsd4: add open state code for CLAIM_DELEGATE_CUR")
Cc: stable@vger.kernel.org
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.
Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.
In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().
Reported-by: lei lu <llfamsec@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/CAEBF3_b=UvqzNKdnfD_52L05Mqrqui9vZ2eFamgAbV0WG+FNWQ@mail.gmail.com/
Fixes: d20c11d86d ("nfsd: Protect session creation and client confirm using client_lock")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The valid values for ek_fsidtype are actually 0-7 so it's better to
change the type to u8. Also using kstrtou8() to relpace simple_strtoul(),
kstrtou8() is safer and more suitable for u8.
Suggested-by: NeilBrown <neil@brown.name>
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Convert the svc_wake_up tracepoint into svc_pool_thread_event class.
Have it also record the pool id, and add new tracepoints for when the
thread is already running and for when there are no idle threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
csum_partial_copy_to_xdr is only used inside the sunrpc module, so
remove the export.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
csum_partial_copy_to_xdr can handle a checksumming and non-checksumming
case and implements this using a callback, which leads to a lot of
boilerplate code and indirect calls in the fast path.
Switch to storing a need_checksum flag in struct xdr_skb_reader instead
to remove the indirect call and simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The rqst argument to xdr_init_encode_pages is set to NULL by all callers,
and pages is always set to buf->pages. Remove the two arguments and
hardcode the assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When a write delegation is returned, check if read access was added
to nfs4_file when client opens file with WRONLY, and release it.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC8881, section 9.1.2 says:
"In the case of READ, the server may perform the corresponding
check on the access mode, or it may choose to allow READ for
OPEN4_SHARE_ACCESS_WRITE, to accommodate clients whose WRITE
implementation may unavoidably do reads (e.g., due to buffer cache
constraints)."
and in section 10.4.1:
"Similarly, when closing a file opened for OPEN4_SHARE_ACCESS_WRITE/
OPEN4_SHARE_ACCESS_BOTH and if an OPEN_DELEGATE_WRITE delegation
is in effect"
This patch allows READ using write delegation stateid granted on OPENs
with OPEN4_SHARE_ACCESS_WRITE only, to accommodate clients whose WRITE
implementation may unavoidably do (e.g., due to buffer cache
constraints).
For write delegation granted for OPEN with OPEN4_SHARE_ACCESS_WRITE
a new nfsd_file and a struct file are allocated to use for reads.
The nfsd_file is freed when the file is closed by release_all_access.
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
An abort op was introduced to allow its caller to invoke it within a lock
in the caller's function. On the other hand, _iommufd_object_alloc_ucmd()
would invoke the abort op in iommufd_object_abort_and_destroy() that must
be outside the caller's lock. So, these two cannot work together.
Add a validation in the _iommufd_object_alloc_ucmd(). Pick -EOPNOTSUPP to
reject the function call, indicating that the object allocator is buggy.
Link: https://patch.msgid.link/r/20250710202354.1658511-1-nicolinc@nvidia.com
Suggested-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
