Commit 21c167aa0b ("net/sched: act_ctinfo: use percpu stats")
missed that stats_dscp_set, stats_dscp_error and stats_cpmark_set
might be written (and read) locklessly.
Use atomic64_t for these three fields, I doubt act_ctinfo is used
heavily on big SMP hosts anyway.
Fixes: 24ec483cec ("net: sched: Introduce act_ctinfo action")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pedro Tammela <pctammela@mojatatu.com>
Link: https://patch.msgid.link/20250709090204.797558-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_ct_params
makes sure there is no discrepancy in tcf_ct_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_csum_params
makes sure there is no discrepancy in tcf_csum_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_connmark_parms
makes sure there is no discrepancy in tcf_connmark_act().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_tm_dump() reads fields that can be changed concurrently,
and tcf_lastuse_update() might race against itself.
Add READ_ONCE() and WRITE_ONCE() annotations.
Fetch jiffies once in tcf_tm_dump().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250709090204.797558-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UBSAN complains that we reach beyond the end of the log entry:
UBSAN: array-index-out-of-bounds in drivers/net/ethernet/meta/fbnic/fbnic_fw_log.c:94:50
index 71 is out of range for type 'char [*]'
Call Trace:
<TASK>
ubsan_epilogue+0x5/0x2b
fbnic_fw_log_write+0x120/0x960
fbnic_fw_parse_logs+0x161/0x210
We're just taking the address of the character after the array,
so this really seems like something that should be legal.
But whatever, easy enough to silence by doing direct pointer math.
Fixes: c2b93d6bec ("eth: fbnic: Create ring buffer for firmware logs")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250709205910.3107691-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Consolidate the two nested if conditions for checking tx queue wake
conditions into a single combined condition. This improves code
readability without changing functionality. And move netif_tx_wake_queue
into if condition to reduce unnecessary checks for queue stops.
Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250710023208.846-1-liming.wu@jaguarmicro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netem_enqueue's duplication prevention logic breaks when a netem
resides in a qdisc tree with other netems - this can lead to a
soft lockup and OOM loop in netem_dequeue, as seen in [1].
Ensure that a duplicating netem cannot exist in a tree with other
netems.
Previous approaches suggested in discussions in chronological order:
1) Track duplication status or ttl in the sk_buff struct. Considered
too specific a use case to extend such a struct, though this would
be a resilient fix and address other previous and potential future
DOS bugs like the one described in loopy fun [2].
2) Restrict netem_enqueue recursion depth like in act_mirred with a
per cpu variable. However, netem_dequeue can call enqueue on its
child, and the depth restriction could be bypassed if the child is a
netem.
3) Use the same approach as in 2, but add metadata in netem_skb_cb
to handle the netem_dequeue case and track a packet's involvement
in duplication. This is an overly complex approach, and Jamal
notes that the skb cb can be overwritten to circumvent this
safeguard.
4) Prevent the addition of a netem to a qdisc tree if its ancestral
path contains a netem. However, filters and actions can cause a
packet to change paths when re-enqueued to the root from netem
duplication, leading us to the current solution: prevent a
duplicating netem from inhabiting the same tree as other netems.
[1] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/
[2] https://lwn.net/Articles/719297/
Fixes: 0afb51e728 ("[PKT_SCHED]: netem: reinsert for duplication")
Reported-by: William Liu <will@willsroot.io>
Reported-by: Savino Dicanosa <savy@syst3mfailure.io>
Signed-off-by: William Liu <will@willsroot.io>
Signed-off-by: Savino Dicanosa <savy@syst3mfailure.io>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250708164141.875402-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 7d43f1ce9d ("locking/rwsem: Enable time-based spinning on
reader-owned rwsem"), OWNER_SPINNABLE contains all possible values except
OWNER_NONSPINNABLE, namely OWNER_NULL | OWNER_WRITER | OWNER_READER.
Therefore, it is better to use OWNER_NONSPINNABLE directly to determine
whether to exit optimistic spin.
And, remove useless OWNER_SPINNABLE to simplify the code.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250610130158.4876-1-alexjlzheng@tencent.com
The `Lock::try_lock()` function returns an `Option<Guard<...>>`, but it
currently does not issue a warning if the return value is unused.
To avoid potential bugs, the `#[must_use]` annotation is added to ensure
proper usage.
Note that `T` is `#[must_use]` but `Option<T>` is not.
For more context, see: https://github.com/rust-lang/rust/issues/71368.
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1133
Signed-off-by: Jason Devers <dev.json2@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241212154753.139563-1-dev.json2@gmail.com
devm_mutex_init() can fail. With CONFIG_DEBUG_MUTEXES=y the mutex will be
marked as unusable and trigger errors on usage.
Enforce all callers check the return value through the compiler.
As devm_mutex_init() itself is a macro, it can not be annotated
directly. Annotate __devm_mutex_init() instead.
Unfortunately __must_check/warn_unused_result don't propagate through
statement expression. So move the statement expression into the argument
list of the call to __devm_mutex_init() through a helper macro.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250617-must_check-devm_mutex_init-v7-3-d9e449f4d224@weissschuh.net
devm_mutex_init() can fail. With CONFIG_DEBUG_MUTEXES=y the mutex will be
marked as unusable and trigger errors on usage.
Add the missed check.
Fixes: 87a59548af ("leds: lp8860: Use new mutex guards to cleanup function exits")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250617-must_check-devm_mutex_init-v7-2-d9e449f4d224@weissschuh.net
devm_mutex_init() can fail. With CONFIG_DEBUG_MUTEXES=y the mutex will
be marked as unusable and trigger errors on usage.
Add the missed check.
Fixes: 48900813ab ("spi: spi-nxp-fspi: remove the goto in probe")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250617-must_check-devm_mutex_init-v7-1-d9e449f4d224@weissschuh.net
In the below noted Fixes commit we introduced a reflck mutex to allow
better scaling between devices for open and close. The reflck was
based on the hot reset granularity, device level for root bus devices
which cannot support hot reset or bus/slot reset otherwise. Overlooked
in this were SR-IOV VFs, where there's also no bus reset option, but
the default for a non-root-bus, non-slot-based device is bus level
reflck granularity.
The reflck mutex has since become the dev_set mutex (via commit
2cd8b14aaa ("vfio/pci: Move to the device set infrastructure")) and
is our defacto serialization for various operations and ioctls. It
still seems to be the case though that sets of vfio-pci devices really
only need serialization relative to hot resets affecting the entire
set, which is not relevant to SR-IOV VFs. As described in the Closes
link below, this serialization contributes to startup latency when
multiple VFs sharing the same "bus" are opened concurrently.
Mark the device itself as the basis of the dev_set for SR-IOV VFs.
Reported-by: Aaron Lewis <aaronlewis@google.com>
Closes: https://lore.kernel.org/all/20250626180424.632628-1-aaronlewis@google.com
Tested-by: Aaron Lewis <aaronlewis@google.com>
Fixes: e309df5b0c ("vfio/pci: Parallelize device open and release")
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250626225623.1180952-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When CONFIG_IOMMUFD is enabled and a device is bound to the pds_vfio_pci
driver, the following WARN_ON() trace is seen and probe fails:
WARNING: CPU: 0 PID: 5040 at drivers/vfio/vfio_main.c:317 __vfio_register_dev+0x130/0x140 [vfio]
<...>
pds_vfio_pci 0000:08:00.1: probe with driver pds_vfio_pci failed with error -22
This is because the driver's vfio_device_ops.detach_ioas isn't set.
Fix this by using the generic vfio_iommufd_physical_detach_ioas
function.
Fixes: 38fe3975b4 ("vfio/pds: Initial support for pds VFIO driver")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250702163744.69767-1-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Restore the len >= 288 condition on using the AVX implementation, which
was incidentally removed by commit 318c53ae02 ("crypto: x86/poly1305 -
Add block-only interface"). This check took into account the overhead
in key power computation, kernel-mode "FPU", and tail handling
associated with the AVX code. Indeed, restoring this check slightly
improves performance for len < 256 as measured using poly1305_kunit on
an "AMD Ryzen AI 9 365" (Zen 5) CPU:
Length Before After
====== ========== ==========
1 30 MB/s 36 MB/s
16 516 MB/s 598 MB/s
64 1700 MB/s 1882 MB/s
127 2265 MB/s 2651 MB/s
128 2457 MB/s 2827 MB/s
200 2702 MB/s 3238 MB/s
256 3841 MB/s 3768 MB/s
511 4580 MB/s 4585 MB/s
512 5430 MB/s 5398 MB/s
1024 7268 MB/s 7305 MB/s
3173 8999 MB/s 8948 MB/s
4096 9942 MB/s 9921 MB/s
16384 10557 MB/s 10545 MB/s
While the optimal threshold for this CPU might be slightly lower than
288 (see the len == 256 case), other CPUs would need to be tested too,
and these sorts of benchmarks can underestimate the true cost of
kernel-mode "FPU". Therefore, for now just restore the 288 threshold.
Fixes: 318c53ae02 ("crypto: x86/poly1305 - Add block-only interface")
Cc: stable@vger.kernel.org
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250706231100.176113-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Restore the SIMD usability check and base conversion that were removed
by commit 318c53ae02 ("crypto: x86/poly1305 - Add block-only
interface").
This safety check is cheap and is well worth eliminating a footgun.
While the Poly1305 functions should not be called when SIMD registers
are unusable, if they are anyway, they should just do the right thing
instead of corrupting random tasks' registers and/or computing incorrect
MACs. Fixing this is also needed for poly1305_kunit to pass.
Just use irq_fpu_usable() instead of the original crypto_simd_usable(),
since poly1305_kunit won't rely on crypto_simd_disabled_for_test.
Fixes: 318c53ae02 ("crypto: x86/poly1305 - Add block-only interface")
Cc: stable@vger.kernel.org
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250706231100.176113-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Restore the SIMD usability check that was removed by commit a59e5468a9
("crypto: arm64/poly1305 - Add block-only interface").
This safety check is cheap and is well worth eliminating a footgun.
While the Poly1305 functions should not be called when SIMD registers
are unusable, if they are anyway, they should just do the right thing
instead of corrupting random tasks' registers and/or computing incorrect
MACs. Fixing this is also needed for poly1305_kunit to pass.
Just use may_use_simd() instead of the original crypto_simd_usable(),
since poly1305_kunit won't rely on crypto_simd_disabled_for_test.
Fixes: a59e5468a9 ("crypto: arm64/poly1305 - Add block-only interface")
Cc: stable@vger.kernel.org
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250706231100.176113-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Restore the SIMD usability check that was removed by commit 773426f477
("crypto: arm/poly1305 - Add block-only interface").
This safety check is cheap and is well worth eliminating a footgun.
While the Poly1305 functions should not be called when SIMD registers
are unusable, if they are anyway, they should just do the right thing
instead of corrupting random tasks' registers and/or computing incorrect
MACs. Fixing this is also needed for poly1305_kunit to pass.
Just use may_use_simd() instead of the original crypto_simd_usable(),
since poly1305_kunit won't rely on crypto_simd_disabled_for_test.
Fixes: 773426f477 ("crypto: arm/poly1305 - Add block-only interface")
Cc: stable@vger.kernel.org
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250706231100.176113-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The previous lines ensure that EXT4_GET_BLOCKS_QUERY_LAST_IN_LEAF is
set so remove this duplicate check.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/aDCdjUhpzxB64vkD@stanley.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When vfio_df_close() is called with open_count=0, it triggers a warning in
vfio_assert_device_open() but still decrements open_count to -1. This allows
a subsequent open to incorrectly pass the open_count == 0 check, leading to
unintended behavior, such as setting df->access_granted = true.
For example, running an IOMMUFD compat no-IOMMU device with VFIO tests
(https://github.com/awilliam/tests/blob/master/vfio-noiommu-pci-device-open.c)
results in a warning and a failed VFIO_GROUP_GET_DEVICE_FD ioctl on the first
run, but the second run succeeds incorrectly.
Add checks to avoid decrementing open_count below zero.
Fixes: 05f37e1c03 ("vfio: Pass struct vfio_device_file * to vfio_device_open/close()")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250618234618.1910456-2-jacob.pan@linux.microsoft.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For devices with no-iommu enabled in IOMMUFD VFIO compat mode, the group open
path skips vfio_df_open(), leaving open_count at 0. This causes a warning in
vfio_assert_device_open(device) when vfio_df_close() is called during group
close.
The correct behavior is to skip only the IOMMUFD bind in the device open path
for no-iommu devices. Commit 6086efe734 omitted vfio_df_open(), which was
too broad. This patch restores the previous behavior, ensuring
the vfio_df_open is called in the group open path.
Fixes: 6086efe734 ("vfio-iommufd: Move noiommu compat validation out of vfio_iommufd_bind()")
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250618234618.1910456-1-jacob.pan@linux.microsoft.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fragments aren't limited by Z_EROFS_PCLUSTER_MAX_DSIZE. However, if
a fragment's logical length is larger than Z_EROFS_PCLUSTER_MAX_DSIZE
but the fragment is not the whole inode, it currently returns
-EOPNOTSUPP because m_flags has the wrong EROFS_MAP_ENCODED flag set.
It is not intended by design but should be rare, as it can only be
reproduced by mkfs with `-Eall-fragments` in a specific case.
Let's normalize fragment m_flags using the new EROFS_MAP_FRAGMENT.
Reported-by: Axel Fontaine <axel@axelfontaine.com>
Closes: https://github.com/erofs/erofs-utils/issues/23
Fixes: 7c3ca1838a ("erofs: restrict pcluster size limitations")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250711195826.3601157-1-hsiangkao@linux.alibaba.com
Document xe module params with the default values following a similar
strategy for all of them:
1) Define a DEFAULT_* macro with the default value. When the
value can't be directly stringified, also define a *_STR
variant
2) Use __stringify() or the _STR variant to make sure the
default value shows up in the param description
This allows us to show the correct default according to the
configuration. max_vfs for example was wrongly documented for
CONFIG_DRM_XE_DEBUG and svm_notifier_size didn't have its default
documented.
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250626-guc-log-level-v3-1-c3ed8b452e91@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The check would fail if the address is unaligned, but not when
accounting the offset. Instead of `buf | offset` it should have
been `buf + offset`. To make it more readable and also drop the
uintptr_t, just use the IS_ALIGNED() macro.
Fixes: 270172f64b ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250710-migrate-aligned-v1-1-44003ef3c078@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Returning NULL for out of bound CPU or thread map items causes
internal errors. Fix by correctly setting the error to be an index
error.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-14-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The struct pyrf_evlist embeds the evlist requiring the copying from
things like parsed events. The copying logic handles the leader being
the event itself, but if the leader group event is a different in the
list it will cause an evsel to point to the evsel in the list that was
copied from which is bad. Fix this by adding another pass over the
evlist rewriting leaders, simplified by the introductin of two evlist
helpers.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-13-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tool PMUs assume that stat's process_counter_values is being used to
read the counters. Specifically they hold onto old values in
evsel->prev_raw_counts and give the cumulative count based off of this
value. Update pyrf_evsel__read to allocate counts and prev_raw_counts,
use evsel__read_counter rather than perf_evsel__read so tool PMUs are
read from not just perf_event_open events, make the returned
pyrf_counts_values contain the delta value rather than the cumulative
value.
Fixes: 739621f657 ("perf python: Add evsel read method")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-12-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The evsel__pmu_name helper will internally use evsel__find_pmu that
handles legacy events, extended types, etc. in determining a PMU and
will provide a better value than just trying to access the PMU's name
directly as the PMU may not have been computed.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If the short and long descriptions are the same then save space and
don't store both of them. When storing the desc in the perf_pmu_alias,
don't duplicate the desc into the long_desc.
By avoiding storing the duplicate the size of the events string in the
binary on x86 is reduced by 29,840 bytes.
Fix tests that expect a duplicated description.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Metrics will fill in the context to have mappings from an event to a
count. When counts are added they replace existing mappings which
generally shouldn't exist with aggregation. Switch to accumulating to
better support cases where perf stat's aggregation isn't used and we
may see a counter more than once.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The rblist of metric_event that then have a list of associated
metric_expr is moved out of the stat_config and into the evlist. This
is done as part of refactoring things for python, having the state
split in two places complicates that implementation. The evlist is
doing the harder work of enabling and disabling events, the metrics
are needed to compute a value and it doesn't seem unreasonable to hang
them from the evlist.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Factor metricgroup__for_each_metric into its own function handling
regular and sys metrics. Make the metric adding and printing code use
it, move the printing code into print-events files.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If sysfs isn't mounted then we may fail to read a PMU's type. In this
situation resort to lookup of wellknown types. Only applies to
software, tracepoint and breakpoint PMUs.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add missing breakpoint and raw types. Avoid a switch, just use a
lookup array. Switch the type to unsigned to avoid checking negative
values.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Long names like ucsi_source_psy_USBC000:001 when prefixed with hwmon_
exceed the buffer size and the last digit is lost. This causes
confusion with similar names like ucsi_source_psy_USBC000:002. Extend
the buffer size to avoid this.
Fixes: 53cc0b351e ("perf hwmon_pmu: Add a tool PMU exposing events from hwmon in sysfs")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Since the commit e9846f5ead ("perf test: In forked mode add check that
fds aren't leaked"), the test "Breakpoint accounting" reports the error:
# perf test -vvv "Breakpoint accounting"
20: Breakpoint accounting:
--- start ---
test child forked, pid 373
failed opening event 0
failed opening event 0
watchpoints count 4, breakpoints count 6, has_ioctl 1, share 0
wp 0 created
wp 1 created
wp 2 created
wp 3 created
wp 0 modified to bp
wp max created
---- end(0) ----
Leak of file descriptor 7 that opened: 'anon_inode:[perf_event]'
A watchpoint's file descriptor was not properly released. This patch
fixes the leak.
Fixes: 032db28e5f ("perf tests: Add breakpoint accounting/modify test")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250711-perf_fix_breakpoint_accounting-v1-1-b314393023f9@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2).
No conflicts.
Adjacent changes:
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
c701574c54 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan")
b3a431fe2e ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()")
drivers/net/wireless/mediatek/mt76/mt7996/mac.c
62da647a2b ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
dc66a129ad ("wifi: mt76: add a wrapper for wcid access with validation")
drivers/net/wireless/mediatek/mt76/mt7996/main.c
3dd6f67c66 ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()")
8989d8e90f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()")
net/mac80211/cfg.c
58fcb1b428 ("wifi: mac80211: reject VHT opmode for unsupported channel widths")
037dc18ac3 ("wifi: mac80211: add support for storing station S1G capabilities")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The description above vpanic() has the wrong function name. Fix it up.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/23a7e8add6546b155371b7e0fbb37bb1def13d6e.1752232374.git.namcao@linutronix.de
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20250711183802.2d8c124d@canb.auug.org.au/
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
vpanic() does not return. However, objtool doesn't know this and gets
confused:
kernel/trace/rv/reactor_panic.o: warning: objtool: rv_panic_reaction(): unexpected end of section .text
Add vpanic() to the list of noreturn functions.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/073f826ebec18b2bb59cba88606cd865d8039fd2.1752232374.git.namcao@linutronix.de
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507110826.2ekbVdWZ-lkp@intel.com/
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to include the compatible string for the PM7550 PMICs.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250709-sm7635-pmxr2230-v2-3-09777dab0a95@fairphone.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to include the compatible string for the PMIV0104 PMICs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/20250709-sm7635-pmiv0104-v2-2-ebf18895edd6@fairphone.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 5a3e85c3c3 ("pinmux: Use sequential access to access
desc->pinmux data") tried to address the issue when two client of the
same gpio calls pinctrl_select_state() for the same functionality, was
resulting in NULL pointer issue while accessing desc->mux_owner.
However, issue was not completely fixed due to the way it was handled
and it can still result in the same NULL pointer.
The issue occurs due to the following interleaving:
cpu0 (process A) cpu1 (process B)
pin_request() { pin_free() {
mutex_lock()
desc->mux_usecount--; //becomes 0
..
mutex_unlock()
mutex_lock(desc->mux)
desc->mux_usecount++; // becomes 1
desc->mux_owner = owner;
mutex_unlock(desc->mux)
mutex_lock(desc->mux)
desc->mux_owner = NULL;
mutex_unlock(desc->mux)
This sequence leads to a state where the pin appears to be in use
(`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can
cause NULL pointer on next pin_request on the same pin.
Ensure that updates to mux_usecount and mux_owner are performed
atomically under the same lock. Only clear mux_owner when mux_usecount
reaches zero and no new owner has been assigned.
Fixes: 5a3e85c3c3 ("pinmux: Use sequential access to access desc->pinmux data")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/20250708-pinmux-race-fix-v2-1-8ae9e8a0d1a1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
