Helper function cxl_resource_contains_addr() can be used to check if a
resource range contains an input address. Use it to replace all code
that checks whether a resource range contains a DPA/HPA/SPA.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250711032357.127355-4-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Per Table 8-143. "Get Partition Info Output Payload" in CXL r3.2 section
8.2.10.9.2.1 "Get Partition Info(Opcode 4100h)", DPA 0 is a valid
address of a CXL device. However, cxl_do_ppr() considers it as an
invalid address, so that user will get an -EINVAL when user calls the
sysfs interface of the edac driver to trigger a Post Package Repair(PPR)
operation for DPA 0 on a CXL device. The correct implementation should
be checking if the input DPA is in the DPA range of the CXL device.
Fixes: be9b359e05 ("cxl/edac: Add CXL memory device soft PPR control feature")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250711032357.127355-3-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In CXL subsystem, many functions need to check an address availability
by checking if the resource range contains the address. Providing a new
helper function cxl_resource_contains_addr() to check if the resource
range contains the input address.
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250711032357.127355-2-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Currently, the ACK RSSI value is not shown in station dump. Enable WMI
resource flag for ACK RSSI in WMI INIT command to add ACK RSSI value in
management TX completion event from WMI. Update ACK RSSI value obtained
in management and data frame completion path to ieee80211_tx_info. Also
advertise NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT flag during hardware
register to mac80211 layer so that ACK RSSI is added to station dump
message.
Example output :
Station aa:bb:cc:dd:ee:ff (on wlp88s0)
inactive time: 46584 ms
rx bytes: 955
rx packets: 10
tx bytes: 769
tx packets: 6
tx retries: 81
tx failed: 0
rx drop misc: 0
signal: -39 dBm
signal avg: -40 dBm
tx bitrate: 6.0 MBit/s
tx duration: 1185 us
rx bitrate: 309.7 MBit/s 40MHz HE-MCS 6 HE-NSS 2 HE-GI 0 HE-DCM 0
rx duration: 0 us
last ack signal:-41 dBm
avg ack signal: -40 dBm
authorized: yes
authenticated: yes
.......
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sivashankari Madhavan <quic_sivamadh@quicinc.com>
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250709133554.622463-1-quic_ssreeela@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fix a coding mistake in a previous fix related to system suspend
and hibernation merged recently.
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhw2k4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1RMYH/2qgZ/ocUAh8SL1y4rhj19O5J5ihZtZr
Joh3zzUirX6bhxlmP9NHtLNBFNSma72rI2WUDPz9tA6RxfY/lV9CssXCIYN/w8YU
xsso4X0cOulxTvR0hiS6DcXXtFg1X/OgV6w+Pv5t1pLvnsIcCRJtGFfGU909kSKV
yap6DMbSiV3WC8B03Az3B6OUFBTaCuvt1ghs2I9F8O4b6/WuUrriYIAb3/MgWqQl
YA/STieJWUo/hgpIvC09x/Raf8cztIqEi98DCADzhU43wZNR/t8ahlOnlIPK/ujh
TnJHZdpVJUDS62reqaZHnQPxGnfltOPAqlWoM1azo8SCeouhEb1fOXM=
=TocQ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a coding mistake in a previous fix related to system suspend and
hibernation merged recently"
* tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Call pm_restore_gfp_mask() after dpm_resume()
Add support to Alienware Area-51m and Alienware m15 R5.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250710-m15_r5-v1-1-2c6ad44e5987@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Print the status of enabled attack vectors and SMT mitigation status in the
boot log for easier reporting and debugging. This information will also be
available through sysfs.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-21-david.kaplan@amd.com
Use attack vector controls to determine which TSA mitigation to use.
[ bp: Simplify the condition in the select function for better
readability. ]
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250709155844.3279471-1-david.kaplan@amd.com
Use attack vector controls to determine if L1TF mitigation is required.
Disable SMT if cross-thread protection is desired.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-17-david.kaplan@amd.com
Use attack vector controls to determine if retbleed mitigation is
required.
Disable SMT if cross-thread protection is desired and STIBP is not
available.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-13-david.kaplan@amd.com
Use attack vector controls to determine if MDS mitigation is required.
The global mitigations=off command now simply disables all attack vectors
so explicit checking of mitigations=off is no longer needed.
If cross-thread attack mitigations are required, disable SMT.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-6-david.kaplan@amd.com
Add a function which defines which vulnerabilities should be mitigated
based on the selected attack vector controls. The selections here are
based on the individual characteristics of each vulnerability.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-5-david.kaplan@amd.com
ARCH_HAS_CPU_ATTACK_VECTORS should be set for architectures which implement
the new attack-vector based controls for CPU mitigations. If an arch does
not support attack-vector based controls then an attempt to use them
results in a warning.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-4-david.kaplan@amd.com
Define 4 new attack vectors that are used for controlling CPU speculation
mitigations. These may be individually disabled as part of the
mitigations= command line. Attack vector controls are combined with global
options like 'auto' or 'auto,nosmt' like 'mitigations=auto,no_user_kernel'.
The global options come first in the mitigations= string.
Cross-thread mitigations can either remain enabled fully, including
potentially disabling SMT ('auto,nosmt'), remain enabled except for
disabling SMT ('auto'), or entirely disabled through the new
'no_cross_thread' attack vector option.
The default settings for these attack vectors are consistent with existing
kernel defaults, other than the automatic disabling of VM-based attack
vectors if KVM support is not present.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-3-david.kaplan@amd.com
The think-lmi driver uses the firwmare_attributes_class. But this class
is registered after think-lmi, causing the "think-lmi" directory in
"/sys/class/firmware-attributes" to be missing when the driver is
compiled as builtin.
Fixes: 5592240380 ("platform/x86: think-lmi: Directly use firmware_attributes_class")
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Link: https://lore.kernel.org/r/7dce5f7f-c348-4350-ac53-d14a8e1e8034@secunet.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Document the 5 new attack vector command line options, how they
interact with existing vulnerability controls, and recommendations on when
they can be disabled.
Note that while mitigating against untrusted userspace requires both
user-to-kernel and user-to-user protection, these are kept separate. The
kernel can control what code executes inside of it and that may affect the
risk associated with vulnerabilities especially if new kernel mitigations
are implemented. The same isn't typically true of userspace.
In other words, the risk associated with user-to-user or guest-to-guest
attacks is unlikely to change over time. While the risk associated with
user-to-kernel or guest-to-host attacks may change. Therefore, these
controls are separated.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250709155731.3279419-1-david.kaplan@amd.com
- small fix relevant to arm64 server and custom CMA configuration
(Feng Tang)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaHCzdQAKCRCJp1EFxbsS
RMrMAQDghOwKZqYuC27kJt5T7lgG47YCNE5em1v8WsTSvwQAugEA4AlWIpqQ34eI
Es6ObfMt8Q9gArubFZ0ZDFtmZq9NpA0=
=+z0i
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fix from Marek Szyprowski:
- small fix relevant to arm64 server and custom CMA configuration (Feng
Tang)
* tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-contiguous: hornor the cma address limit setup by user
Make sure to drop the OF node reference taken when creating the Gaokun
auxiliary devices when the devices are later released.
Fixes: 7636f090d0 ("platform: arm64: add Huawei Matebook E Go EC driver")
Cc: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250708085358.15657-1-johan@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Registering the "other mode" notifier fails if that is disabled:
x86_64-linux-ld: drivers/platform/x86/lenovo/wmi-gamezone.o: in function `lwmi_gz_probe':
wmi-gamezone.c:(.text+0x336): undefined reference to `devm_lwmi_om_register_notifier'
This could be fixed by adding a stub helper, but a Kconfig 'select'
seems simpler here.
Fixes: 22024ac536 ("platform/x86: Add Lenovo Gamezone WMI Driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250709151734.1268435-1-arnd@kernel.org
[ij: retained the other selects as wmi-gamezone is using them directly.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After we do the modification on the host side, ensure we write the
result back to VRAM and not the other way around, otherwise the
modification will be lost if treated like a read.
Fixes: 270172f64b ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250710134128.800756-2-matthew.auld@intel.com
Firmware would assert on undefined bits in DSM-originated DWs.
With this change, Firmware introduces a fail-safe mechanism
and removes the assert behavior. This ensures robustness when
handling raw DSM table data.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.eee871df03c9.I2be2eaa16437e84aa1be0c6c95ec334034ce7e50@changeid
In the current code, if there was a rekey, we remove all the existing keys
from mac80211, then re-add the ones that the FW sent with
ieee80211_gtk_rekey_add, (newer FW will send also the existing GTKs/BIGTKs)
and then update the sequence number.
Instead of removing and re-adding the existing keys for no good reason,
we can just update the sequence of all keys, also of the ones that are
going to be replaced, and update again after the replace.
This change is required because ieee80211_gtk_rekey_add is going to be
changed to lookup the cipher from the old key instead of receiving it as an
argument, and for this it will need the old key(s), so we can't remove all
keys.
Note that with this change, in case that a key that existed before wowlan
is replaced, mac80211 will now call the driver to remove the old key and
add the new one (as opposed the previous behaviour, in which the key was
removed by the driver itself).
Of course we don't want to run the set_key callbacks in this case, so just
return early.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.f0b5e19f77f5.I958f4926f168cdad6d4d7720ebde2f5e812b297d@changeid
In the current code, if there was a rekey, we remove all the existing keys
from mac80211, then re-add the ones that the FW sent with
ieee80211_gtk_rekey_add, (newer FW will send also the existing GTKs/BIGTKs)
and then update the sequence number.
Instead of removing and re-adding the existing keys for no good reason,
we can just update the sequence of all keys, also of the ones that are
going to be replaced, and update again after the replace.
This change is required because ieee80211_gtk_rekey_add is going to be
changed to lookup the cipher from the old key instead of receiving it as an
argument, and for this it will need the old key(s), so we can't remove all
keys.
Note that with this change, in case that a key that existed before wowlan
is replaced, mac80211 will now call the driver to remove the old key and
add the new one (as opposed the previous behaviour, in which the key was
removed by the driver itself).
Of course we don't want to run the set_key callbacks in this case, so just
return early.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.10091484e38e.I45daf089189f606f3879ca4538fb46303d761710@changeid
For older APIs, gtk_seq[0].key_id will be set to -1, while other code
assumes that it will always be a valid gtk key idx.
Since the FW does provide the idx for those APIs, simply set it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.2a5a5e4d7b19.Ib795751119070495c0c95526cd36bd7f87594f56@changeid
The default capabilities were set to much more than the hardware
currently is intended to support, and then masked off for only
the GL MAC type. However, this was due to some miscommunication
and is incorrect, it should've been masked off for all current
and planned MACs/RFs. Instead of doing this removing and adding
of capabilities, simply list the ones that currently apply to
all devices. If this changes for a new device type we can change
the code, but at least the driver won't erroneously advertise
some capabilities that aren't actually implemented in hardware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.69b9dac7d906.I7885499bc80453d5a84285ec927f5e89f9adfb21@changeid
Add iwl_trans_suppress_cmd_error_once() function to be called by the op
modes instead of directly checking the trans status bits.
This hides the trans internal implementation details from callers.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.e061ae241fd3.Ie2043c4e237196ebcfe195006d3d76371de48a55@changeid
When a GO is started, the P2P device mac is updated to indicate
that frames for the P2P device mac should be filtered in while
the GO is active. However, this configuration is done after the GO is
already started so it doesn't take effect. Fix it by updating the
P2P device mac before adding the broadcast station, which actually
starts the GO.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.463a0ad545f9.I85a25484d787b65f6a27e794285911e319df0b2d@changeid
The scan request validation function uses bitwise and instead
of logical and. Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.ec7d665f56a4.I416816b491fafa5d3efdf0a4be78356eedf2bd95@changeid
Add a device-tree for the Asus Portable AiO P1801-T, which is a NVIDIA
Tegra30-based 2-in-1 detachable tablet, originally running Android.
The tablet was also sold together with a PC docking station as the
Transformer AiO P1801.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # P1801-T with dock
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250616073947.13675-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
