Document the requirements for booting a kernel on a system implementing
a GICv5 interrupt controller.
Specifically, other than DT/ACPI providing the required firmware
representation, define what traps must be disabled if the kernel is
booted at EL1 on a system where EL2 is implemented.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-30-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 architecture implements the Interrupt Wire Bridge (IWB) in
order to support wired interrupts that cannot be connected directly
to an IRS and instead uses the ITS to translate a wire event into
an IRQ signal.
Add the wired-to-MSI IWB driver to manage IWB wired interrupts.
An IWB is connected to an ITS and it has its own deviceID for all
interrupt wires that it manages; the IWB input wire number must be
exposed to the ITS as an eventID with a 1:1 mapping.
This eventID is not programmable and therefore requires a new
msi_alloc_info_t flag to make sure the ITS driver does not allocate
an eventid for the wire but rather it uses the msi_alloc_info_t.hwirq
number to gather the ITS eventID.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-29-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 architecture implements Interrupt Translation Service
(ITS) components in order to translate events coming from peripherals
into interrupt events delivered to the connected IRSes.
Events (ie MSI memory writes to ITS translate frame), are translated
by the ITS using tables kept in memory.
ITS translation tables for peripherals is kept in memory storage
(device table [DT] and Interrupt Translation Table [ITT]) that
is allocated by the driver on boot.
Both tables can be 1- or 2-level; the structure is chosen by the
driver after probing the ITS HW parameters and checking the
allowed table splits and supported {device/event}_IDbits.
DT table entries are allocated on demand (ie when a device is
probed); the DT table is sized using the number of supported
deviceID bits in that that's a system design decision (ie the
number of deviceID bits implemented should reflect the number
of devices expected in a system) therefore it makes sense to
allocate a DT table that can cater for the maximum number of
devices.
DT and ITT tables are allocated using the kmalloc interface;
the allocation size may be smaller than a page or larger,
and must provide contiguous memory pages.
LPIs INTIDs backing the device events are allocated one-by-one
and only upon Linux IRQ allocation; this to avoid preallocating
a large number of LPIs to cover the HW device MSI vector
size whereas few MSI entries are actually enabled by a device.
ITS cacheability/shareability attributes are programmed
according to the provided firmware ITS description.
The GICv5 partially reuses the GICv3 ITS MSI parent infrastructure
and adds functions required to retrieve the ITS translate frame
addresses out of msi-map and msi-parent properties to implement
the GICv5 ITS MSI parent callbacks.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-28-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In some irqchip implementations the fwnode representing the IRQdomain
and the MSI controller fwnode do not match; in particular the IRQdomain
fwnode is the MSI controller fwnode parent.
To support selecting such IRQ domains, add a flag in core IRQ domain
code that explicitly tells the MSI lib to use the parent fwnode while
carrying out IRQ domain selection.
Update the msi-lib select callback with the resulting logic.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-27-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 ITS will reuse some GICv3 ITS MSI parent functions therefore
it makes sense to keep the code functionality in a compilation unit
shared by the two drivers.
Rename the GICv3 ITS MSI parent file and update the related
Kconfig/Makefile entries to pave the way for code sharing.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-26-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
IRQchip drivers need a PCI/MSI function to map a RID to a MSI
controller deviceID namespace and at the same time retrieve the
struct device_node pointer of the MSI controller the RID is mapped
to.
Add pci_msi_map_rid_ctlr_node() to achieve this purpose.
Cc Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-25-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add an of_msi_xlate() helper that maps a device ID and returns
the device node of the MSI controller the device ID is mapped to.
Required by core functions that need an MSI controller device node
pointer at the same time as a mapped device ID, of_msi_map_id() is not
sufficient for that purpose.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-24-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Set up IPIs by allocating IPI IRQs for all cpus and call into
arm64 core code to initialise IPIs IRQ descriptors and
request the related IRQ.
Implement hotplug callback to enable interrupts on a cpu
and register the cpu with an IRS.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-23-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
An IRS supports Logical Peripheral Interrupts (LPIs) and implement
Linux IPIs on top of it.
LPIs are used for interrupt signals that are translated by a
GICv5 ITS (Interrupt Translation Service) but also for software
generated IRQs - namely interrupts that are not driven by a HW
signal, ie IPIs.
LPIs rely on memory storage for interrupt routing and state.
LPIs state and routing information is kept in the Interrupt
State Table (IST).
IRSes provide support for 1- or 2-level IST tables configured
to support a maximum number of interrupts that depend on the
OS configuration and the HW capabilities.
On systems that provide 2-level IST support, always allow
the maximum number of LPIs; On systems with only 1-level
support, limit the number of LPIs to 2^12 to prevent
wasting memory (presumably a system that supports a 1-level
only IST is not expecting a large number of interrupts).
On a 2-level IST system, L2 entries are allocated on
demand.
The IST table memory is allocated using the kmalloc() interface;
the allocation required may be smaller than a page and must be
made up of contiguous physical pages if larger than a page.
On systems where the IRS is not cache-coherent with the CPUs,
cache mainteinance operations are executed to clean and
invalidate the allocated memory to the point of coherency
making it visible to the IRS components.
On GICv5 systems, IPIs are implemented using LPIs.
Add an LPI IRQ domain and implement an IPI-specific IRQ domain created
as a child/subdomain of the LPI domain to allocate the required number
of LPIs needed to implement the IPIs.
IPIs are backed by LPIs, add LPIs allocation/de-allocation
functions.
The LPI INTID namespace is managed using an IDA to alloc/free LPI INTIDs.
Associate an IPI irqchip with IPI IRQ descriptors to provide
core code with the irqchip.ipi_send_single() method required
to raise an IPI.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-22-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 Interrupt Routing Service (IRS) component implements
interrupt management and routing in the GICv5 architecture.
A GICv5 system comprises one or more IRSes, that together
handle the interrupt routing and state for the system.
An IRS supports Shared Peripheral Interrupts (SPIs), that are
interrupt sources directly connected to the IRS; they do not
rely on memory for storage. The number of supported SPIs is
fixed for a given implementation and can be probed through IRS
IDR registers.
SPI interrupt state and routing are managed through GICv5
instructions.
Each core (PE in GICv5 terms) in a GICv5 system is identified with
an Interrupt AFFinity ID (IAFFID).
An IRS manages a set of cores that are connected to it.
Firmware provides a topology description that the driver uses
to detect to which IRS a CPU (ie an IAFFID) is associated with.
Use probeable information and firmware description to initialize
the IRSes and implement GICv5 IRS SPIs support through an
SPI-specific IRQ domain.
The GICv5 IRS driver:
- Probes IRSes in the system to detect SPI ranges
- Associates an IRS with a set of cores connected to it
- Adds an IRQchip structure for SPI handling
SPIs priority is set to a value corresponding to the lowest
permissible priority in the system (taking into account the
implemented priority bits of the IRS and CPU interface).
Since all IRQs are set to the same priority value, the value
itself does not matter as long as it is a valid one.
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-21-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 CPU interface implements support for PE-Private Peripheral
Interrupts (PPI), that are handled (enabled/prioritized/delivered)
entirely within the CPU interface hardware.
To enable PPI interrupts, implement the baseline GICv5 host kernel
driver infrastructure required to handle interrupts on a GICv5 system.
Add the exception handling code path and definitions for GICv5
instructions.
Add GICv5 PPI handling code as a specific IRQ domain to:
- Set-up PPI priority
- Manage PPI configuration and state
- Manage IRQ flow handler
- IRQs allocation/free
- Hook-up a PPI specific IRQchip to provide the relevant methods
PPI IRQ priority is chosen as the minimum allowed priority by the
system design (after probing the number of priority bits implemented
by the CPU interface).
Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Co-developed-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-20-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 architecture introduces two barriers instructions
(GSB SYS, GSB ACK) that are used to manage interrupt effects.
Rework macro used to emit the SB barrier instruction and implement
the GSB barriers on top of it.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-19-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The arm64 arch has relied so far on GIC architectural software
generated interrupt (SGIs) to handle IPIs. Those are per-cpu
software generated interrupts.
arm64 architecture code that allocates the IPIs virtual IRQs and
IRQ descriptors was written accordingly.
On GICv5 systems, IPIs are implemented using LPIs that are not
per-cpu interrupts - they are just normal routable IRQs.
Add arch code to set-up IPIs on systems where they are handled
using normal routable IRQs.
For those systems, force the IRQ affinity (and make it immutable)
to the cpu a given IRQ was assigned to.
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
[lpieralisi: changed affinity set-up, log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-18-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Implement the GCIE capability as a strict boot cpu capability to
detect whether architectural GICv5 support is available in HW.
Plug it in with a naming consistent with the existing GICv3
CPU interface capability.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-17-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for adding a GICv5 CPU interface capability,
rework the existing GICv3 CPUIF capability - change its name and
description so that the subsequent GICv5 CPUIF capability
can be added with a more consistent naming on top.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-16-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
GICv5 trap configuration registers value is UNKNOWN at reset.
Initialize GICv5 EL2 trap configuration registers to prevent
trapping GICv5 instruction/register access upon entering the
kernel.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-15-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add field reporting the GCIE feature to ID_AA64PFR2_EL1 sysreg.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-2-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 interrupt controller architecture is composed of:
- one or more Interrupt Routing Service (IRS)
- zero or more Interrupt Translation Service (ITS)
- zero or more Interrupt Wire Bridge (IWB)
Describe a GICv5 implementation by specifying a top level node
corresponding to the GICv5 system component.
IRS nodes are added as GICv5 system component children.
An ITS is associated with an IRS so ITS nodes are described
as IRS children - use the hierarchy explicitly in the device
tree to define the association.
IWB nodes are described as a separate schema.
An IWB is connected to a single ITS, the connection is made explicit
through the msi-parent property and therefore is not required to be
explicit through a parent-child relationship in the device tree.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-1-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The variable 'type' is assigned the value SI_INVALID which is zero
and later checks of 'type' is non-zero (which is always false). The
variable is not referenced anywhere else, so it is redundant and
so is the check, so remove these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-ID: <20250708151805.1893858-1-colin.i.king@gmail.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
This reverts commit 6f11adcc6f.
The problematic commit was fixed in mainline, so the work-around in
io_uring can be removed at this point. Anonymous inodes no longer
pretend to be regular files after:
1e7ab6f678 ("anon_inode: rework assertions")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot reports that defer/local task_work adding via msg_ring can hit
a request that has been freed:
CPU: 1 UID: 0 PID: 19356 Comm: iou-wrk-19354 Not tainted 6.16.0-rc4-syzkaller-00108-g17bbde2e1716 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
io_req_local_work_add io_uring/io_uring.c:1184 [inline]
__io_req_task_work_add+0x589/0x950 io_uring/io_uring.c:1252
io_msg_remote_post io_uring/msg_ring.c:103 [inline]
io_msg_data_remote io_uring/msg_ring.c:133 [inline]
__io_msg_ring_data+0x820/0xaa0 io_uring/msg_ring.c:151
io_msg_ring_data io_uring/msg_ring.c:173 [inline]
io_msg_ring+0x134/0xa00 io_uring/msg_ring.c:314
__io_issue_sqe+0x17e/0x4b0 io_uring/io_uring.c:1739
io_issue_sqe+0x165/0xfd0 io_uring/io_uring.c:1762
io_wq_submit_work+0x6e9/0xb90 io_uring/io_uring.c:1874
io_worker_handle_work+0x7cd/0x1180 io_uring/io-wq.c:642
io_wq_worker+0x42f/0xeb0 io_uring/io-wq.c:696
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
which is supposed to be safe with how requests are allocated. But msg
ring requests alloc and free on their own, and hence must defer freeing
to a sane time.
Add an rcu_head and use kfree_rcu() in both spots where requests are
freed. Only the one in io_msg_tw_complete() is strictly required as it
has been visible on the other ring, but use it consistently in the other
spot as well.
This should not cause any other issues outside of KASAN rightfully
complaining about it.
Link: https://lore.kernel.org/io-uring/686cd2ea.a00a0220.338033.0007.GAE@google.com/
Reported-by: syzbot+54cbbfb4db9145d26fc2@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Fixes: 0617bb500b ("io_uring/msg_ring: improve handling of target CQE posting")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The minimum interval specified the PMSIDR_EL1.Interval field is a
hardware recommendation. However, this value is set by hardware designer
before the production. It is not actual hardware limitation but tools
currently have no way to test shorter periods.
This change relaxes the limitation by allowing any non-zero periods,
with simplifying code with clamp_t().
The downside is that small periods may increase the risk of AUX ring
buffer overruns. When an overrun occurs, the perf core layer will
trigger an irq work to disable the event and wake up the tool in user
space to read the trace data. After the tool finishes reading, it will
re-enable the AUX event.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250627163028.3503122-1-leo.yan@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The ARMv9.2 architecture introduces the optional Branch Record Buffer
Extension (BRBE), which records information about branches as they are
executed into set of branch record registers. BRBE is similar to x86's
Last Branch Record (LBR) and PowerPC's Branch History Rolling Buffer
(BHRB).
BRBE supports filtering by exception level and can filter just the
source or target address if excluded to avoid leaking privileged
addresses. The h/w filter would be sufficient except when there are
multiple events with disjoint filtering requirements. In this case, BRBE
is configured with a union of all the events' desired branches, and then
the recorded branches are filtered based on each event's filter. For
example, with one event capturing kernel events and another event
capturing user events, BRBE will be configured to capture both kernel
and user branches. When handling event overflow, the branch records have
to be filtered by software to only include kernel or user branch
addresses for that event. In contrast, x86 simply configures LBR using
the last installed event which seems broken.
It is possible on x86 to configure branch filter such that no branches
are ever recorded (e.g. -j save_type). For BRBE, events with a
configuration that will result in no samples are rejected.
Recording branches in KVM guests is not supported like x86. However,
perf on x86 allows requesting branch recording in guests. The guest
events are recorded, but the resulting branches are all from the host.
For BRBE, events with branch recording and "exclude_host" set are
rejected. Requiring "exclude_guest" to be set did not work. The default
for the perf tool does set "exclude_guest" if no exception level
options are specified. However, specifying kernel or user events
defaults to including both host and guest. In this case, only host
branches are recorded.
BRBE can support some additional exception branch types compared to
x86. On x86, all exceptions other than syscalls are recorded as IRQ.
With BRBE, it is possible to better categorize these exceptions. One
limitation relative to x86 is we cannot distinguish a syscall return
from other exception returns. So all exception returns are recorded as
ERET type. The FIQ branch type is omitted as the only FIQ user is Apple
platforms which don't support BRBE. The debug branch types are omitted
as there is no clear need for them.
BRBE records are invalidated whenever events are reconfigured, a new
task is scheduled in, or after recording is paused (and the records
have been recorded for the event). The architecture allows branch
records to be invalidated by the PE under implementation defined
conditions. It is expected that these conditions are rare.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-4-e7775563036e@kernel.org
[will: Fix sparse warnings about mixed declarations and code.
Fix C99 comment syntax.]
Signed-off-by: Will Deacon <will@kernel.org>
Move the source to a better place in Device Drivers -> Graphics support
now that its configurable.
v4:
- Move source location (Tvrtko)
v3:
- Patch introduced to replace per-driver config (Lucas)
Signed-off-by: Juston Li <justonli@chromium.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250611225145.1739201-1-justonli@chromium.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Enable CONFIG_PWM and CONFIG_PWM_PXA in the defconfig
to support the PWM controller used on the SpacemiT K1 SoC.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The SND_SOC_STARFIVE Kconfig symbol was removed, but it is still enabled
in the RISC-V defconfig. Just remove it, as it is no longer needed.
Fixes: acc317e525 ("ASoC: starfive: Standardize ASoC menu")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
If ksmbd_iov_pin_rsp return error, use-after-free can happen by
accessing opinfo->state and opinfo_put and ksmbd_fd_put could
called twice.
Reported-by: Ziyan Xu <research@securitygossip.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the call of ksmbd_vfs_lock_parent() fails, we drop the parent_path
references and return an error. We need to drop the write access we
just got on parent_path->mnt before we drop the mount reference - callers
assume that ksmbd_vfs_kern_path_locked() returns with mount write
access grabbed if and only if it has returned 0.
Fixes: 864fb5d371 ("ksmbd: fix possible deadlock in smb2_open")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The qp is created by rdma_create_qp() as t->cm_id->qp
and t->qp is just a shortcut.
rdma_destroy_qp() also calls ib_destroy_qp(cm_id->qp) internally,
but it is protected by a mutex, clears the cm_id and also calls
trace_cm_qp_destroy().
This should make the tracing more useful as both
rdma_create_qp() and rdma_destroy_qp() are traces and it makes
the code look more sane as functions from the same layer are used
for the specific qp object.
trace-cmd stream -e rdma_cma:cm_qp_create -e rdma_cma:cm_qp_destroy
shows this now while doing a mount and unmount from a client:
<...>-80 [002] 378.514182: cm_qp_create: cm.id=1 src=172.31.9.167:5445 dst=172.31.9.166:37113 tos=0 pd.id=0 qp_type=RC send_wr=867 recv_wr=255 qp_num=1 rc=0
<...>-6283 [001] 381.686172: cm_qp_destroy: cm.id=1 src=172.31.9.167:5445 dst=172.31.9.166:37113 tos=0 qp_num=1
Before we only saw the first line.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <stfrench@microsoft.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The datasheets refer to the first Ethernet controller as GMAC0, not
EMAC0.
Fix the compatible string, node label and pinmux function name to match
what the datasheets use. A change to the device tree binding is sent
separately.
Fixes: 56766ca6c4 ("arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC")
Fixes: acca163f3f ("arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board")
Fixes: c6800f1599 ("arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board")
Link: https://patch.msgid.link/20250628054438.2864220-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Vhost net need to know the exact virtio net hdr size to be able
to copy such header correctly. Teach it about the newly defined
UDP tunnel-related option and update the hdr size computation
accordingly.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new tun features to represent the newly introduced virtio
GSO over UDP tunnel offload. Allows detection and selection of
such features via the existing TUNSETOFFLOAD ioctl and compute
the expected virtio header size and tunnel header offset using
the current netdev features, so that we can plug almost seamless
the newly introduced virtio helpers to serialize the extended
virtio header.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
---
v6 -> v7:
- rebased
v4 -> v5:
- encapsulate the guest feature guessing in a tun helper
- dropped irrelevant check on xdp buff headroom
- do not remove unrelated black line
- avoid line len > 80 char
v3 -> v4:
- virtio tnl-related fields are at fixed offset, cleanup
the code accordingly.
- use netdev features instead of flags bit to check for
the configured offload
- drop packet in case of enabled features/configured hdr
size mismatch
v2 -> v3:
- cleaned-up uAPI comments
- use explicit struct layout instead of raw buf.
If the related virtio feature is set, enable transmission and reception
of gso over UDP tunnel packets.
Most of the work is done by the previously introduced helper, just need
to determine the UDP tunnel features inside the virtio_net_hdr and
update accordingly the virtio net hdr size.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The virtio specification are introducing support for GSO over UDP
tunnel.
This patch brings in the needed defines and the additional virtio hdr
parsing/building helpers.
The UDP tunnel support uses additional fields in the virtio hdr, and such
fields location can change depending on other negotiated features -
specifically VIRTIO_NET_F_HASH_REPORT.
Try to be as conservative as possible with the new field validation.
Existing implementation for plain GSO offloads allow for invalid/
self-contradictory values of such fields. With GSO over UDP tunnel we can
be more strict, with no need to deal with legacy implementation.
Since the checksum-related field validation is asymmetric in the driver
and in the device, introduce a separate helper to implement the new checks
(to be used only on the driver side).
Note that while the feature space exceeds the 64-bit boundaries, the
guest offload space is fixed by the specification of the
VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET command to a 64-bit size.
Prior to the UDP tunnel GSO support, each guest offload bit corresponded
to the feature bit with the same value and vice versa.
Due to the limited 'guest offload' space, relevant features in the high
64 bits are 'mapped' to free bits in the lower range. That is simpler
than defining a new command (and associated features) to exchange an
extended guest offloads set.
As a consequence, the uAPIs also specify the mapped guest offload value
corresponding to the UDP tunnel GSO features.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
--
v4 -> v5:
- avoid lines above 80 chars
v3 -> v4:
- fixed offset for UDP GSO tunnel, update accordingly the helpers
- tried to clarified vlan_hlen semantic
- virtio_net_chk_data_valid() -> virtio_net_handle_csum_offload()
v2 -> v3:
- add definitions for possible vnet hdr layouts with tunnel support
v1 -> v2:
- 'relay' -> 'rely' typo
- less unclear comment WRT enforced inner GSO checks
- inner header fields are allowed only with 'modern' virtio,
thus are always le
- clarified in the commit message the need for 'mapped features'
defines
- assume little_endian is true when UDP GSO is enabled.
- fix inner proto type value
The virtio_net driver needs it to implement GSO over UDP tunnel
offload.
The only missing piece is mapping them to/from the extended
features.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the extended feature type for 'acked_features' and implement
two new ioctls operation allowing the user-space to set/query an
unbounded amount of features.
The actual number of processed features is limited by VIRTIO_FEATURES_MAX
and attempts to set features above such limit fail with
EOPNOTSUPP.
Note that: the legacy ioctls implicitly truncate the negotiated
features to the lower 64 bits range and the 'acked_backend_features'
field don't need conversion, as the only negotiated feature there
is in the low 64 bit range.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
