All filesystems will already check the max and min value of their block
size during their initialization. __getblk_slow() is a very low-level
function to have these checks. Remove them and only check for logical
block size alignment.
As this check with logical block size alignment might never trigger, add
WARN_ON_ONCE() to the check. As WARN_ON_ONCE() will already print the
stack, remove the call to dump_stack().
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/20250626113223.181399-1-p.raghav@samsung.com
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When sysctl_nr_open is set to a very high value (for example, 1073741816
as set by systemd), processes attempting to use file descriptors near
the limit can trigger massive memory allocation attempts that exceed
INT_MAX, resulting in a WARNING in mm/slub.c:
WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288
This happens because kvmalloc_array() and kvmalloc() check if the
requested size exceeds INT_MAX and emit a warning when the allocation is
not flagged with __GFP_NOWARN.
Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a
process calls dup2(oldfd, 1073741880), the kernel attempts to allocate:
- File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes
- Multiple bitmaps: ~400MB
- Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647)
Reproducer:
1. Set /proc/sys/fs/nr_open to 1073741816:
# echo 1073741816 > /proc/sys/fs/nr_open
2. Run a program that uses a high file descriptor:
#include <unistd.h>
#include <sys/resource.h>
int main() {
struct rlimit rlim = {1073741824, 1073741824};
setrlimit(RLIMIT_NOFILE, &rlim);
dup2(2, 1073741880); // Triggers the warning
return 0;
}
3. Observe WARNING in dmesg at mm/slub.c:5027
systemd commit a8b627a introduced automatic bumping of fs.nr_open to the
maximum possible value. The rationale was that systems with memory
control groups (memcg) no longer need separate file descriptor limits
since memory is properly accounted. However, this change overlooked
that:
1. The kernel's allocation functions still enforce INT_MAX as a maximum
size regardless of memcg accounting
2. Programs and tests that legitimately test file descriptor limits can
inadvertently trigger massive allocations
3. The resulting allocations (>8GB) are impractical and will always fail
systemd's algorithm starts with INT_MAX and keeps halving the value
until the kernel accepts it. On most systems, this results in nr_open
being set to 1073741816 (0x3ffffff8), which is just under 1GB of file
descriptors.
While processes rarely use file descriptors near this limit in normal
operation, certain selftests (like
tools/testing/selftests/core/unshare_test.c) and programs that test file
descriptor limits can trigger this issue.
Fix this by adding a check in alloc_fdtable() to ensure the requested
allocation size does not exceed INT_MAX. This causes the operation to
fail with -EMFILE instead of triggering a kernel warning and avoids the
impractical >8GB memory allocation request.
Fixes: 9cfe015aa4 ("get rid of NR_OPEN and introduce a sysctl_nr_open")
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/20250629074021.1038845-1-sashal@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
- Gracefully fail initialising pKVM if the interrupt controller isn't
GICv3
- Also gracefully fail initialising pKVM if the carveout allocation
fails
- Fix the computing of the minimum MMIO range required for the host on
stage-2 fault
- Fix the generation of the GICv3 Maintenance Interrupt in nested mode
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmhdY4cACgkQI9DQutE9
ekOyqw//U0wxGtFhzro2bZPLCGfthRsnVsZQDODPiXhUCc2+92/X4Ek+UmWX4McH
Pzgik16g3jq6h+PtwtIjkVucj52QdHS5XiVTai12udtsJMkwFSuWbaNDGW96Y2G9
/msF6FCD82fCz5yYGJMbX69Dthim72O8TTTLMOjBRVvCJzy6NmBRQQTOhfgVNhoI
p91kqx3V02NTIG+Gd03Xhg5QVzGTFEJ3BtGBJ8tlO+o0DIzHbP+0vHSdRmKcchz6
u3zOYBAny3p8Qa2B92QrzLvNXq1bOnnB1a52D5ZDBa1vqDeLSRfFne9V6RTxRDeM
IY1uoWVWHLHkSufzJu6hwteEKStA7FOeihnUAx4I0VllGT7Ce+mFcD/XrNdMYZHS
L5kSWSkfqz0sbX3a1gPO0YpQCZ648lHJqu84VGIasL3uunHCJ5zmu75+G52GXASQ
4hZgd0zlCx1ALvn4KhZhtV+YncrXOPfGXY83o+S3jECjeHR56zQ2XBANt8afjW09
SpJO/UqwFubuLUZECV0tO4bKffIphkeJDYbrLCNdlT+RCSJa0sQ3eWLkZy7YpKr7
EyzQbT8HfIX5sRxKNk0nTgTG0RPV6i2sI7BiUMQrR3hPs5H9Y4Ie3qL9m+FEAzQf
XcrZl7b4xWXCFeQ0PJIOUs26hyiFYrNJvZ6ldcMIsk5keLnKWo4=
=no8X
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.16-4' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #4
- Gracefully fail initialising pKVM if the interrupt controller isn't
GICv3
- Also gracefully fail initialising pKVM if the carveout allocation
fails
- Fix the computing of the minimum MMIO range required for the host on
stage-2 fault
- Fix the generation of the GICv3 Maintenance Interrupt in nested mode
The UAPI headers have been split out from the kernel-only headers.
They maintained as part of the bitmap library.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
BITS_PER_LONG does not exist in UAPI headers, so can't be used by the UAPI
__GENMASK(). Instead __BITS_PER_LONG needs to be used.
When __GENMASK() was introduced in commit 3c7a8e190b ("uapi: introduce uapi-friendly macros for GENMASK"),
the code was fine. A broken revert in 1e7933a575 ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
introduced the incorrect usage of BITS_PER_LONG.
That was fixed in commit 11fcf36850 ("uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again").
But a broken sync of the kernel headers with the tools/ headers in
commit fc92099902 ("tools headers: Synchronize linux/bits.h with the kernel sources")
undid the fix.
Reapply the fix and while at it also fix the tools header.
Fixes: fc92099902 ("tools headers: Synchronize linux/bits.h with the kernel sources")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Add some comments to dump_enum to help the next person who has to figure
out what it is actually doing.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-8-corbet@lwn.net
We no longer support Python 2 in the docs build chain at all, so we
certainly do not need to admonish folks to keep this file working with it.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-7-corbet@lwn.net
Add a set of comments to process_proto_function and reorganize the logic
slightly; no functional change.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-6-corbet@lwn.net
process_proto_type() is using a complex regex and a "while True" loop to
split a declaration into chunks and, in the end, count brackets. Switch to
using a simpler regex to just do the split directly, and handle each chunk
as it comes. The result is, IMO, easier to understand and reason about.
The old algorithm would occasionally elide the space between function
parameters; see struct rng_alg->generate(), foe example. The only output
difference is to not elide that space, which is more correct.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-5-corbet@lwn.net
Putting the floor under brcount does not change the output in any way, just
remove it.
Change the termination test from ==0 to <=0 to prevent infinite loops in
case somebody does something truly wacko in the code.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-4-corbet@lwn.net
process_proto_type() and process_proto_function() reinventing the strip()
string method with a whole series of separate regexes; take all that out
and just use strip().
The previous implementation also (in process_proto_type()) removed C++
comments *after* the above dance, leaving trailing whitespace in that case;
now we do the stripping afterward. This results in exactly one output
change: the removal of a spurious space in the definition of
BACKLIGHT_POWER_REDUCED - see
https://docs.kernel.org/gpu/backlight.html#c.backlight_properties.
I note that we are putting semicolons after #define lines that really
shouldn't be there - a task for another day.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250703184403.274408-2-corbet@lwn.net
pktcdvd got killed in a previous commit, remove the reference to it as
well in the cdrom documentation.
Fixes: 1cea5180f2 ("block: remove pktcdvd driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Panther Lake has proven to be stable through testing and use.
Remove the force_probe requirement and enable the platform by default.
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://lore.kernel.org/r/20250707201959.319406-1-matthew.s.atwood@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When uloading snd_soc_avs module there is NULL pointer dereference.
It happens, because codec was moved into pdata and
avs_component_hda_unregister_dais() was not updated.
Fixes: 1581d5c682 ("ASoC: Intel: avs: boards: Add Kconfig option for obsolete card names")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20250708105009.1883627-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new netlink parameter 'HANDSHAKE_A_ACCEPT_KEYRING' to provide
the serial number of the keyring to use.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250701144657.104401-1-hare@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When CONFIG_DEBUG_EFI is enabled, some objects are needlessly rebuilt.
[Steps to reproduce]
Enable CONFIG_DEBUG_EFI and run 'make' twice in a clean source tree.
On the second run, arch/arm64/kernel/head.o is rebuilt even though
no files have changed.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- clean
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
[ snip ]
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
CALL scripts/checksyscalls.sh
AS arch/arm64/kernel/head.o
AR arch/arm64/kernel/built-in.a
AR arch/arm64/built-in.a
AR built-in.a
[ snip ]
The issue is caused by the use of the $(realpath ...) function.
At the time arch/arm64/kernel/Makefile is parsed on the first run,
$(objtree)/vmlinux does not exist. As a result,
$(realpath $(objtree)/vmlinux) expands to an empty string.
On the second run of Make, $(objtree)/vmlinux already exists, so
$(realpath $(objtree)/vmlinux) expands to the absolute path of vmlinux.
However, this change in the command line causes arch/arm64/kernel/head.o
to be rebuilt.
To address this issue, use $(abspath ...) instead, which does not require
the file to exist. While $(abspath ...) does not resolve symlinks, this
should be fine from a debugging perspective.
The GNU Make manual [1] clearly explains the difference between the two:
$(realpath names...)
For each file name in names return the canonical absolute name.
A canonical name does not contain any . or .. components, nor any
repeated path separators (/) or symlinks. In case of a failure the
empty string is returned. Consult the realpath(3) documentation for
a list of possible failure causes.
$(abspath namees...)
For each file name in names return an absolute name that does not
contain any . or .. components, nor any repeated path separators (/).
Note that, in contrast to realpath function, abspath does not resolve
symlinks and does not require the file names to refer to an existing
file or directory. Use the wildcard function to test for existence.
The same problem exists in drivers/firmware/efi/libstub/Makefile.zboot.
On the first run of Make, $(obj)/vmlinuz.efi.elf does not exist when the
Makefile is parsed, so -DZBOOT_EFI_PATH is set to an empty string.
Replace $(realpath ...) with $(abspath ...) there as well.
[1]: https://www.gnu.org/software/make/manual/make.html#File-Name-Functions
Fixes: 757b435aaa ("efi: arm64: Add vmlinux debug link to the Image binary")
Fixes: a050910972 ("efi/libstub: implement generic EFI zboot")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250625125555.2504734-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
ADDRLABEL only works when it was set in compilation phase. Replace it with
net_dbg_ratelimited().
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702104417.1526138-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current version of the blk_rq_dma_map support in nvme-pci tries to
reconstruct the DMA mappings from the on the wire descriptors if they
are needed for unmapping. While this is not the case for the direct
mapping fast path and the IOVA path, it is needed for the non-IOVA slow
path, e.g. when using the interconnect is not dma coherent, when using
swiotlb bounce buffering, or a IOMMU mapping that can't coalesce.
While the reconstruction is easy and works fine for the SGL path, where
the on the wire representation maps 1:1 to DMA mappings, the code to
reconstruct the DMA mapping ranges from PRPs can't always work, as a
given PRP layout can come from different DMA mappings, and the current
code doesn't even always get that right.
Give up on this approach and track the actual DMA mapping when actually
needed again.
Fixes: 7ce3c1dd78 ("nvme-pci: convert the data mapping to blk_rq_dma_map")
Reported-by: Ben Copeland <ben.copeland@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250707125223.3022531-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With VMAP_STACK now always enabled on arm64, remove all CONFIG_VMAP_STACK
conditionals from entry handling in arch/arm64/kernel/entry-common.c and
arch/arm64/kernel/entry.S.
This change unconditionally includes the bad stack handling and overflow
detection logic, simplifying the code and reflecting the mandatory use of
VMAP_STACK for all arm64 kernel builds.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-8-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK now always enabled on arm64, remove all
CONFIG_VMAP_STACK conditionals from SDEI stack allocation and
initialization in arch/arm64/kernel/sdei.c.
This change unconditionally defines the SDEI stack pointers and replaces
runtime checks with BUILD_BUG_ON() assertions, ensuring that the code is
only built when VMAP_STACK is enabled. This simplifies the logic and
reflects the mandatory use of VMAP_STACK for all arm64 kernel builds.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-7-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK now always enabled on arm64, remove all CONFIG_VMAP_STACK
conditionals from overflow stack handling in stacktrace code.
This change unconditionally defines the per-CPU overflow_stack and
stackinfo_get_overflow() helper in arch/arm64/include/asm/stacktrace.h,
and always includes the overflow stack in the stack_info array in
arch/arm64/kernel/stacktrace.c. Also, drop redundant CONFIG_VMAP_STACK
checks from SDEI stack declarations.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-6-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK now always enabled on arm64, remove the
CONFIG_VMAP_STACK checks from overflow stack definitions and related
code in arch/arm64/kernel/traps.c. The overflow_stack and
panic_bad_stack() logic are now unconditionally included, simplifying
the source and matching the mandatory stack model.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-5-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
With VMAP_STACK always enabled on arm64, drop the CONFIG_VMAP_STACK
checks and legacy irq stack allocation from arch/arm64/kernel/irq.c. The
code now unconditionally uses the VMAP_STACK path for irq stack
initialization, simplifying the logic.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-4-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that VMAP_STACK is always enabled on arm64, remove the
CONFIG_VMAP_STACK conditional logic from the definitions of THREAD_SHIFT
and THREAD_ALIGN in arch/arm64/include/asm/memory.h. This simplifies the
code by unconditionally setting THREAD_ALIGN to (2 * THREAD_SIZE) and
adjusting the THREAD_SHIFT definition to only depend on MIN_THREAD_SHIFT
and PAGE_SHIFT.
This change reflects the updated arm64 stack model, where all kernel
threads use virtually mapped stacks with guard pages, and ensures
alignment and stack sizing are consistently handled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-3-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
Remove the CONFIG_VMAP_STACK check in arm64_efi_rt_init() since
VMAP_STACK is now always enabled on arm64.
The arch_alloc_vmap_stack() call will fail to build if VMAP_STACK
is not set, providing sufficient protection without the explicit
runtime check.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-2-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
On arm64, VMAP_STACK has been enabled by default for a while now, and
the only reason to disable it was a historical lack of support for
KASAN_VMALLOC. Today there's no good reason to disable VMAP_STACK.
Mandate VMAP_STACK, which will allow code to be simplified in
subsequent patches.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707-arm64_vmap-v1-1-8de98ca0f91c@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
Updates for v6.17
CI:
- uprev mesa and ci-templates
- use shallow clone to speed up build jobs
- remove sdm845/cheza jobs. These runners are no more (RIP
dear chezas)
- fix runner tag for i915 cml runners
- uprev igt to pull in msm test fixes
Core:
- VM_BIND support!
- single source of truth for UBWC configuration. Adds a global soc
driver for UBWC config which is used from display and GPU. (And
later vidc/camera/etc)
- Decouple ties between GPU and KMS, adding a `separate_gpu_kms`
modparam to allow the GPU and KMS to bind to separate DRM devices.
This should better deal with more exotic SoC configurations where
the number of GPUs is different from number of DPUs. The default
behavior is to still come up as a single unified DRM device to
avoid surprising userspace.
DP:
- major rework of the I/O accessors
DPU:
- use version checks instead of feature bits
- SM8750 support
- set min_prefill_lines for SC8180X
DSI:
- SM8750 support
GPU:
- speedbin support for X1-85
- X1-45 support
MDSS:
- SM8750 support
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Robin Clark <robin.clark@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACSVV0217R+kpoWQJeuYGHf6q_4aFyEJuKa=dZZKOnLQzFwppg@mail.gmail.com
Now that debug exceptions are handled individually and without the need
for dynamic registration, remove the unused registration infrastructure.
This removes the external caller for `debug_exception_enter()` and
`debug_exception_exit()`.
Make them static again and remove them from the header.
Remove `early_brk64()` as it has been made redundant by
(arm64: debug: split brk64 exception entry) and is not used anymore.
Note : in `early_brk64()` `bug_brk_handler()` is called unconditionally
as a fall-through, but now `call_break_hook()` only calls it if the
immediate matches.
This does not change the behaviour in early boot, as if
`bug_brk_handler()` was called on a non-BUG immediate it would return
DBG_HOOK_ERROR anyway, which `call_break_hook()` will do if no immediate
matches.
Remove `trap_init()`, as it would be empty and a weak definition already
exists in `init/main.c`.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-14-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
The BKPT32 exception can only be triggered by a BKPT instruction. Thus,
we know that the PC is a legitimate address and isn't being used to train
a branch predictor with a bogus address : we don't need to call
`arm64_apply_bp_hardening()`.
The handler for this exception only pends a signal and doesn't depend
on any per-CPU state : we don't need to inhibit preemption, nor do we
need to keep the DAIF exceptions masked, so we can unmask them earlier.
Split the BKPT32 exception entry and adjust function signatures and its
behaviour to match its relaxed constraints compared to other
debug exceptions.
We can also remove `NOKRPOBE_SYMBOL`, as this cannot lead to a kprobe
recursion.
This replaces the last usage of `el0_dbg()`, so remove it.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-13-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
The BRK64 instruction can only be triggered by a BRK instruction. Thus,
we know that the PC is a legitimate address and isn't being used to train
a branch predictor with a bogus address : we don't need to call
`arm64_apply_bp_hardening()`.
We do not need to handle the Cortex-A76 erratum #1463225 either, as it
only relevant for single stepping at EL1.
BRK64 does not write FAR_EL1 either, as only hardware watchpoints do so.
Split the BRK64 exception entry, adjust the function signature, and its
behaviour to match the lack of needed mitigations.
Further, as the EL0 and EL1 code paths are cleanly separated, we can split
`do_brk64()` into `do_el0_brk64()` and `do_el1_brk64()`, and call them
directly from the relevant entry paths.
Use `die()` directly for the EL1 error path, as in `do_el1_bti()` and
`do_el1_undef()`.
We can also remove `NOKRPOBE_SYMBOL` for the EL0 path, as it cannot
lead to a kprobe recursion.
When taking a BRK64 exception from EL0, the exception handling is safely
preemptible : the only possible handler is `uprobe_brk_handler()`.
It only operates on task-local data and properly checks its validity,
then raises a Thread Information Flag, processed before returning
to userspace in `do_notify_resume()`, which is already preemptible.
Thus we can safely unmask interrupts and enable preemption before
handling the break itself, fixing a PREEMPT_RT issue where the handler
could call a sleeping function with preemption disabled.
Given that the break hook registration is handled statically in
`call_break_hook` since
(arm64: debug: call software break handlers statically)
and that we now bypass the exception handler registration, this change
renders `early_brk64` redundant : its functionality is now handled through
the post-init path.
This also removes the last usage of `el1_dbg()`.
This also removes the last usage of `el0_dbg()` without `CONFIG_COMPAT`.
Mark it `__maybe_unused`, to prevent a warning when building this patch
without `CONFIG_COMPAT`, as the following patch removes `el0_dbg()`.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-12-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
Hardware watchpoints are the only debug exceptions that will write
FAR_EL1, so we need to preserve it and pass it down.
However, they cannot be used to maliciously train branch predictors, so
we can omit calling `arm64_bp_hardening()`, nor do they need to handle
the Cortex-A76 erratum #1463225, as it only applies to single stepping
exceptions.
As the hardware watchpoint handler only returns 0 and never triggers
the call to `arm64_notify_die()`, we can call it directly from
`entry-common.c`.
Split the hardware watchpoint exception entry and adjust the behaviour
to match the lack of needed mitigations.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-11-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
The single stepping exception has the most constraints : it can be
exploited to train branch predictors and it needs special handling at EL1
for the Cortex-A76 erratum #1463225. We need to conserve all those
mitigations.
However, it does not write an address at FAR_EL1, as only hardware
watchpoints do so.
The single-step handler does its own signaling if it needs to and only
returns 0, so we can call it directly from `entry-common.c`.
Split the single stepping exception entry, adjust the function signature,
keep the security mitigation and erratum handling.
Further, as the EL0 and EL1 code paths are cleanly separated, we can split
`do_softstep()` into `do_el0_softstep()` and `do_el1_softstep()` and
call them directly from the relevant entry paths.
We can also remove `NOKPROBE_SYMBOL` for the EL0 path, as it cannot
lead to a kprobe recursion.
Move the call to `arm64_apply_bp_hardening()` to `entry-common.c` so that
we can do it as early as possible, and only for the exceptions coming
from EL0, where it is needed.
This is safe to do as it is `noinstr`, as are all the functions it
may call. `el0_ia()` and `el0_pc()` already call it this way.
When taking a soft-step exception from EL0, most of the single stepping
handling is safely preemptible : the only possible handler is
`uprobe_single_step_handler()`. It only operates on task-local data and
properly checks its validity, then raises a Thread Information Flag,
processed before returning to userspace in `do_notify_resume()`, which
is already preemptible.
However, the soft-step handler first calls `reinstall_suspended_bps()`
to check if there is any hardware breakpoint or watchpoint pending
or already stepped through.
This cannot be preempted as it manipulates the hardware breakpoint and
watchpoint registers.
Move the call to `try_step_suspended_breakpoints()` to `entry-common.c`
and adjust the relevant comments.
We can now safely unmask interrupts before handling the step itself,
fixing a PREEMPT_RT issue where the handler could call a sleeping function
with preemption disabled.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Closes: https://lore.kernel.org/linux-arm-kernel/Z6YW_Kx4S2tmj2BP@uudg.org/
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-10-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
`reinstall_suspended_bps()` plays a key part in the stepping process
when we have hardware breakpoints and watchpoints enabled.
It checks if we need to step one, will re-enable it if it has
been handled and will return whether or not we need to proceed with
a single-step.
However, the current naming and return values make it harder to understand
the logic and goal of the function.
Rename it `try_step_suspended_breakpoints()` and change the return value
to a boolean, aligning it with similar functions used in
`do_el0_undef()` like `try_emulate_mrs()`, and making its behaviour
more obvious.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-9-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
Hardware breakpoints exceptions are generated by the hardware after user
configuration. As such, they can be exploited when training branch
predictors outside of the userspace VA range: they still need to call
`arm64_apply_bp_hardening()` if needed to mitigate against this attack.
However, they do not need to handle the Cortex-A76 erratum #1463225 as
it only applies to single stepping exceptions.
It does not set an address in FAR_EL1 either, only the hardware
watchpoint does.
As the hardware breakpoint handler only returns 0 and never triggers
the call to `arm64_notify_die()`, we can call it directly from
`entry-common.c`.
Split the hardware breakpoint exception entry, adjust
the function signature, and handling of the Cortex-A76 erratum to fit
the behaviour of the exception.
Move the call to `arm64_apply_bp_hardening()` to `entry-common.c` so that
we can do it as early as possible, and only for the exceptions coming
from EL0, where it is needed.
This is safe to do as it is `noinstr`, as are all the functions it
may call. `el0_ia()` and `el0_pc()` already call it this way.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-8-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Move the `debug_exception_enter()` and `debug_exception_exit()`
functions from mm/fault.c, as they are needed to split
the debug exceptions entry paths from the current unified one.
Make them externally visible in include/asm/exception.h until
the caller in mm/fault.c is cleaned up.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-7-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Remove all infrastructure for the dynamic registration previously used by
software breakpoints and stepping handlers.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-6-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Software stepping checks for the correct handler by iterating over a list
of dynamically registered handlers and calling all of them until one
handles the exception.
This is the only generic way to handle software stepping handlers in arm64
as the exception does not provide an immediate that could be checked,
contrary to software breakpoints.
However, the registration mechanism is not exported and has only
two current users : the KGDB stepping handler, and the uprobe single step
handler.
Given that one comes from user mode and the other from kernel mode, call
the appropriate one by checking the source EL of the exception.
Add a stand-in that returns DBG_HOOK_ERROR when the configuration
options are not enabled.
Remove `arch_init_uprobes()` as it is not useful anymore and is
specific to arm64.
Unify the naming of the handler to XXX_single_step_handler(), making it
clear they are related.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-5-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Software breakpoints pass an immediate value in ESR ("comment") that can
be used to call a specialized handler (KGDB, KASAN...).
We do so in two different ways :
- During early boot, `early_brk64` statically checks against known
immediates and calls the corresponding handler,
- During init, handlers are dynamically registered into a list. When
called, the generic software breakpoint handler will iterate over
the list to find the appropriate handler.
The dynamic registration does not provide any benefit here as it is not
exported and all its uses are within the arm64 tree. It also depends on an
RCU list, whose safe access currently relies on the non-preemptible state
of `do_debug_exception`.
Replace the list iteration logic in `call_break_hooks` to call
the breakpoint handlers statically if they are enabled, like in
`early_brk64`.
Expose the handlers in their respective headers to be reachable from
`arch/arm64/kernel/debug-monitors.c` at link time.
Unify the naming of the software breakpoint handlers to XXX_brk_handler(),
making it clear they are related and to differentiate from the
hardware breakpoints.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-4-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
`aarch32_break_handler()` is called in `do_el0_undef()` when we
are trying to handle an exception whose Exception Syndrome is unknown.
It checks if the instruction hit might be a 32-bit arm break (be it
A32 or T2), and sends a SIGTRAP to userspace if it is so that it can
be handled.
However, this is badly represented in the naming of the function, and
is not consistent with the other functions called with the same logic
in `do_el0_undef()`.
Rename it `try_handle_aarch32_break()` and change the return value to
a boolean to align with the logic of the other tentative handlers in
`do_el0_undef()`, the previous error code being ignored anyway.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250707114109.35672-3-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Remove the unnecessary boolean which always checks if the handler was found
and return early instead.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250707114109.35672-2-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Document uses only single whitespace after full stop, so fix
inconsistency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Devicetree bindings are supposed to be specific in terms of compatibles
and other properties. Short "specific" has many implications, so extend
the description to cover them:
1. Mention no family names and avoid generic SoC fallbacks in
compatible. The list grew, mixing DO's and DON'T's, so split it into
multiple items.
2. No properties implied by the compatible.
3. Document desired lack of ABI impact and acceptable solution if such
needs arises: clearly marking it in commit msg.
All above follows established Devicetree bindings maintainers review
practice, so no new rules in practice are introduced here.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
When speaking about compatibles for new devices comparing to "prior
implementations", usually we expect new device to come with more
features, thus logically it is a superset, not subset, of "prior
implementations".
Suggested-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250707095019.66792-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
drm/i915 feature pull #2 for v6.17:
Features and functionality:
- Add drm_panic support for both i915 and xe drivers (Jocelyn Falempe)
- Add initial flip queue implementation, disabled by default, for LNL and PTL
(Ville)
- Add support for Wildcat Lake (WCL) display, version 30.02 (Matt Roper, Matt
Atwood, Dnyaneshwar)
- Extend drm_panel and follower support to DDI eDP (Arun)
Refactoring and cleanups:
- Make all global state objects opaque (Jani)
- Move display works to display specific unordered workqueue (Luca)
- Add and use struct drm_device based pcode interface (Jani, Lucas)
- Use clamp() instead of max()+min() combo (Ankit)
- Simplify wait for power well disable (Jani)
- Various stylistics cleanups and renames (Jani)
Fixes:
- Deal with loss of pipe DMC state (Ville)
- Fix PTL HDCP2 stream status check (Suraj)
- Add workaround for ADL-P DKL PHY DP and HDMI (Nemesa)
- Fix skl_print_wm_changes() stack usage with KMSAN (Arnd Bergmann)
- Fix PCON capability reads on non-branch devices (Chaitanya)
- Fix which platforms have ultra joiner (Ankit)
DRM core changes:
- Add ttm_bo_kmap_try_from_panic() for xe drm_panic support (Jocelyn Falempe)
- Add private pointer to struct drm_scanout buffer for xe/i915 drm_panic support
(Jocelyn Falempe)
Merges:
- Backmerge drm-next for drm_panel and xe changes (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6d728bf6ef23681b00dfbc7da9aeae41042dee02@intel.com
And use bt_file for both bdev and shmem backed buftargs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The extra bdev_ is weird, so drop it. Also improve the comment to make
it clear these are the hardware limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
