commit bda745ee8f upstream.
The fix to use a per CPU buffer to read user space tested only the writes
to trace_marker. But it appears that the selftests are missing tests to
the trace_maker_raw file. The trace_maker_raw file is used by applications
that writes data structures and not strings into the file, and the tools
read the raw ring buffer to process the structures it writes.
The fix that reads the per CPU buffers passes the new per CPU buffer to
the trace_marker file writes, but the update to the trace_marker_raw write
read the data from user space into the per CPU buffer, but then still used
then passed the user space address to the function that records the data.
Pass in the per CPU buffer and not the user space address.
TODO: Add a test to better test trace_marker_raw.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20251011035243.386098147@kernel.org
Fixes: 64cf7d058a ("tracing: Have trace_marker use per-cpu data to read user space")
Reported-by: syzbot+9a2ede1643175f350105@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e973f5.050a0220.1186a4.0010.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64cf7d058a upstream.
It was reported that using __copy_from_user_inatomic() can actually
schedule. Which is bad when preemption is disabled. Even though there's
logic to check in_atomic() is set, but this is a nop when the kernel is
configured with PREEMPT_NONE. This is due to page faulting and the code
could schedule with preemption disabled.
Link: https://lore.kernel.org/all/20250819105152.2766363-1-luogengkun@huaweicloud.com/
The solution was to change the __copy_from_user_inatomic() to
copy_from_user_nofault(). But then it was reported that this caused a
regression in Android. There's several applications writing into
trace_marker() in Android, but now instead of showing the expected data,
it is showing:
tracing_mark_write: <faulted>
After reverting the conversion to copy_from_user_nofault(), Android was
able to get the data again.
Writes to the trace_marker is a way to efficiently and quickly enter data
into the Linux tracing buffer. It takes no locks and was designed to be as
non-intrusive as possible. This means it cannot allocate memory, and must
use pre-allocated data.
A method that is actively being worked on to have faultable system call
tracepoints read user space data is to allocate per CPU buffers, and use
them in the callback. The method uses a technique similar to seqcount.
That is something like this:
preempt_disable();
cpu = smp_processor_id();
buffer = this_cpu_ptr(&pre_allocated_cpu_buffers, cpu);
do {
cnt = nr_context_switches_cpu(cpu);
migrate_disable();
preempt_enable();
ret = copy_from_user(buffer, ptr, size);
preempt_disable();
migrate_enable();
} while (!ret && cnt != nr_context_switches_cpu(cpu));
if (!ret)
ring_buffer_write(buffer);
preempt_enable();
It's a little more involved than that, but the above is the basic logic.
The idea is to acquire the current CPU buffer, disable migration, and then
enable preemption. At this moment, it can safely use copy_from_user().
After reading the data from user space, it disables preemption again. It
then checks to see if there was any new scheduling on this CPU. If there
was, it must assume that the buffer was corrupted by another task. If
there wasn't, then the buffer is still valid as only tasks in preemptable
context can write to this buffer and only those that are running on the
CPU.
By using this method, where trace_marker open allocates the per CPU
buffers, trace_marker writes can access user space and even fault it in,
without having to allocate or take any locks of its own.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Luo Gengkun <luogengkun@huaweicloud.com>
Cc: Wattson CI <wattson-external@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20251008124510.6dba541a@gandalf.local.home
Fixes: 3d62ab32df ("tracing: Fix tracing_marker may trigger page fault during preempt_disable")
Reported-by: Runping Lai <runpinglai@google.com>
Tested-by: Runping Lai <runpinglai@google.com>
Closes: https://lore.kernel.org/linux-trace-kernel/20251007003417.3470979-2-runpinglai@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c834a97962 upstream.
The functions irqsoff_graph_entry() and irqsoff_graph_return() both call
func_prolog_dec() that will test if the data->disable is already set and
if not, increment it and return. If it was set, it returns false and the
caller exits.
The caller of this function must decrement the disable counter, but misses
doing so if the calltime fails to be acquired.
Instead of exiting out when calltime is NULL, change the logic to do the
work if it is not NULL and still do the clean up at the end of the
function if it is NULL.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20251008114943.6f60f30f@gandalf.local.home
Fixes: a485ea9e3e ("tracing: Fix irqsoff and wakeup latency tracers when using function graph")
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/linux-trace-kernel/20251006175848.1906912-2-sashal@kernel.org/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f7bf54b07 upstream.
The functions wakeup_graph_entry() and wakeup_graph_return() both call
func_prolog_preempt_disable() that will test if the data->disable is
already set and if not, increment it and disable preemption. If it was
set, it returns false and the caller exits.
The caller of this function must decrement the disable counter, but misses
doing so if the calltime fails to be acquired.
Instead of exiting out when calltime is NULL, change the logic to do the
work if it is not NULL and still do the clean up at the end of the
function if it is NULL.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20251008114835.027b878a@gandalf.local.home
Fixes: a485ea9e3e ("tracing: Fix irqsoff and wakeup latency tracers when using function graph")
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/linux-trace-kernel/20251006175848.1906912-1-sashal@kernel.org/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61e19cd2e5 upstream.
When s_start() fails to allocate memory for set_event_iter, it returns NULL
before acquiring event_mutex. However, the corresponding s_stop() function
always tries to unlock the mutex, causing a lock imbalance warning:
WARNING: bad unlock balance detected!
6.17.0-rc7-00175-g2b2e0c04f78c #7 Not tainted
-------------------------------------
syz.0.85611/376514 is trying to release lock (event_mutex) at:
[<ffffffff8dafc7a4>] traverse.part.0.constprop.0+0x2c4/0x650 fs/seq_file.c:131
but there are no more locks to release!
The issue was introduced by commit b355247df1 ("tracing: Cache ':mod:'
events for modules not loaded yet") which added the kzalloc() allocation before
the mutex lock, creating a path where s_start() could return without locking
the mutex while s_stop() would still try to unlock it.
Fix this by unconditionally acquiring the mutex immediately after allocation,
regardless of whether the allocation succeeded.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250929113238.3722055-1-sashal@kernel.org
Fixes: b355247df1 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1efbee6852 upstream.
Commit 974cc7b934 ("mfd: vexpress: Define the device as MFD cells")
removed the return value check from the call to gpiochip_add_data() (or
rather gpiochip_add() back then and later converted to devres) with no
explanation. This function however can still fail, so check the return
value and bail-out if it does.
Cc: stable@vger.kernel.org
Fixes: 974cc7b934 ("mfd: vexpress: Define the device as MFD cells")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250811-gpio-mmio-mfd-conv-v1-1-68c5c958cf80@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64e0d839c5 upstream.
Testing has shown that reading multiple registers at once (for 10-bit
ADC values) does not work. Set the use_single_read regmap_config flag
to make regmap split these for us.
This should fix temperature opregion accesses done by
drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for
the upcoming drivers for the ADC and battery MFD cells.
Fixes: 6bac0606fd ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250804133240.312383-1-hansg@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da32b0e82c upstream.
The NFCR register for MTU5 is at 0x1a95 offset according to Datasheet
Page 725, Table 16.4. The address of all registers is offset by 0x1200,
making the proper address of MTU5 NFCR register be 0x895.
Cc: stable@vger.kernel.org
Fixes: 654c293e16 ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250910175914.12956-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c328f5474 upstream.
Syzbot reported an uninitialized value bug in nci_init_req, which was
introduced by commit 5aca7966d2 ("Merge tag
'perf-tools-fixes-for-v6.17-2025-09-16' of
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools").
This bug arises due to very limited and poor input validation
that was done at nic_valid_size(). This validation only
validates the skb->len (directly reflects size provided at the
userspace interface) with the length provided in the buffer
itself (interpreted as NCI_HEADER). This leads to the processing
of memory content at the address assuming the correct layout
per what opcode requires there. This leads to the accesses to
buffer of `skb_buff->data` which is not assigned anything yet.
Following the same silent drop of packets of invalid sizes at
`nic_valid_size()`, add validation of the data in the respective
handlers and return error values in case of failure. Release
the skb if error values are returned from handlers in
`nci_nft_packet` and effectively do a silent drop
Possible TODO: because we silently drop the packets, the
call to `nci_request` will be waiting for completion of request
and will face timeouts. These timeouts can get excessively logged
in the dmesg. A proper handling of them may require to export
`nci_request_cancel` (or propagate error handling from the
nft packets handlers).
Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=740e04c2a93467a0f8c8
Fixes: 6a2968aaf5 ("NFC: basic NCI protocol implementation")
Tested-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Deepak Sharma <deepak.sharma.472935@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250925132846.213425-1-deepak.sharma.472935@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bd5e45c2c upstream.
When parsing Allocation Extent Descriptor, lengthAllocDescs comes from
on-disk data and must be validated against the block size. Crafted or
corrupted images may set lengthAllocDescs so that the total descriptor
length (sizeof(allocExtDesc) + lengthAllocDescs) exceeds the buffer,
leading udf_update_tag() to call crc_itu_t() on out-of-bounds memory and
trigger a KASAN use-after-free read.
BUG: KASAN: use-after-free in crc_itu_t+0x1d5/0x2b0 lib/crc-itu-t.c:60
Read of size 1 at addr ffff888041e7d000 by task syz-executor317/5309
CPU: 0 UID: 0 PID: 5309 Comm: syz-executor317 Not tainted 6.12.0-rc4-syzkaller-00261-g850925a8133c #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
crc_itu_t+0x1d5/0x2b0 lib/crc-itu-t.c:60
udf_update_tag+0x70/0x6a0 fs/udf/misc.c:261
udf_write_aext+0x4d8/0x7b0 fs/udf/inode.c:2179
extent_trunc+0x2f7/0x4a0 fs/udf/truncate.c:46
udf_truncate_tail_extent+0x527/0x7e0 fs/udf/truncate.c:106
udf_release_file+0xc1/0x120 fs/udf/file.c:185
__fput+0x23f/0x880 fs/file_table.c:431
task_work_run+0x24f/0x310 kernel/task_work.c:239
exit_task_work include/linux/task_work.h:43 [inline]
do_exit+0xa2f/0x28e0 kernel/exit.c:939
do_group_exit+0x207/0x2c0 kernel/exit.c:1088
__do_sys_exit_group kernel/exit.c:1099 [inline]
__se_sys_exit_group kernel/exit.c:1097 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1097
x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Validate the computed total length against epos->bh->b_size.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Reported-by: syzbot+8743fca924afed42f93e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8743fca924afed42f93e
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Larshin Sergey <Sergey.Larshin@kaspersky.com>
Link: https://patch.msgid.link/20250922131358.745579-1-Sergey.Larshin@kaspersky.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bace10b596 upstream.
Assumption that chain DMA module starts the link DMA when 1ms of
data is available from host is not correct. Instead the firmware
chain DMA module fills the link DMA with initial buffer of zeroes
and the host and link DMAs are started at the same time.
This results in a small error in delay calculation. This can become a
more severe problem if host DMA has delays that exceed 1ms. This results
in negative delay to be calculated and bogus values reported to
applications. This can confuse some applications like
alsa_conformance_test.
Fix the issue by correctly calculating the firmware chain DMA
preamble size and initializing the start offset to this value.
Cc: stable@vger.kernel.org
Fixes: a1d203d390 ("ASoC: SOF: ipc4-pcm: Enable delay reporting for ChainDMA streams")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcd1383516 upstream.
When the sampling rates going in (host) and out (dai) from the DSP
are different, the IPC4 delay reporting does not work correctly.
Add support for this case by scaling the all raw position values to
a common timebase before calculating real-time delay for the PCM.
Cc: stable@vger.kernel.org
Fixes: 0ea06680df ("ASoC: SOF: ipc4-pcm: Correct the delay calculation")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4bb62eb59 upstream.
For some reason we ended up with stub functions that are not inline,
this can result in build error if its included multiple places, as we will
be redefining the same function
Fixes: c99a515ff1 ("ASoC: codecs: wcd937x-sdw: add SoundWire driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66a940b1bf upstream.
For some reason we endup with setting soundwire port for
HPHL_COMP and HPHR_COMP as zero, this can potentially result
in a memory corruption due to accessing and setting -1 th element of
port_map array.
Fixes: 82be8c62a3 ("ASoC: codecs: wcd937x: add basic controls")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250909121954.225833-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59abe7bc7e upstream.
In the case of static pipelines, freeing the widgets in the pipelines
that were not suspended after freeing the scheduler widgets results in
errors because the secondary cores are powered off when the scheduler
widgets are freed. Fix this by tearing down the leftover pipelines before
powering off the secondary cores.
Cc: stable@vger.kernel.org
Fixes: d7332c4a4f ("ASoC: SOF: ipc3-topology: Fix pipeline tear down logic")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002073125.32471-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e65bda827 upstream.
wcd934x_codec_parse_data() contains a device reference count leak in
of_slim_get_device() where device_find_child() increases the reference
count of the device but this reference is not properly decreased in
the success path. Add put_device() in wcd934x_codec_parse_data() and
add devm_add_action_or_reset() in the probe function, which ensures
that the reference count of the device is correctly managed.
Memory leak in regmap_init_slimbus() as the allocated regmap is not
released when the device is removed. Using devm_regmap_init_slimbus()
instead of regmap_init_slimbus() to ensure automatic regmap cleanup on
device removal.
Calling path: of_slim_get_device() -> of_find_slim_device() ->
device_find_child(). As comment of device_find_child() says, 'NOTE:
you will need to drop the reference with put_device() after use.'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250923065212.26660-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09cfd3c52e upstream.
It's reported that sometimes a zcrx request can receive more than was
requested. It's caused by io_zcrx_recv_skb() adjusting desc->count for
all received buffers including frag lists, but then doing recursive
calls to process frag list skbs, which leads to desc->count double
accounting and underflow.
Reported-and-tested-by: Matthias Jasny <matthiasjasny@gmail.com>
Fixes: 6699ec9a23 ("io_uring/zcrx: add a read limit to recvzc requests")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eaba58355e upstream.
The debugfs_lookup() function returns a dentry with an increased reference
count that must be released by calling dput().
Fixes: b398f91779 ("hisi_acc_vfio_pci: register debugfs for hisilicon migration driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20250901081809.2286649-1-linmq006@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b15b7d2a1b upstream.
Remove the logic to set interrupt mask by default in uio_hv_generic
driver as the interrupt mask value is supposed to be controlled
completely by the user space. If the mask bit gets changed
by the driver, concurrently with user mode operating on the ring,
the mask bit may be set when it is supposed to be clear, and the
user-mode driver will miss an interrupt which will cause a hang.
For eg- when the driver sets inbound ring buffer interrupt mask to 1,
the host does not interrupt the guest on the UIO VMBus channel.
However, setting the mask does not prevent the host from putting a
message in the inbound ring buffer. So let’s assume that happens,
the host puts a message into the ring buffer but does not interrupt.
Subsequently, the user space code in the guest sets the inbound ring
buffer interrupt mask to 0, saying “Hey, I’m ready for interrupts”.
User space code then calls pread() to wait for an interrupt.
Then one of two things happens:
* The host never sends another message. So the pread() waits forever.
* The host does send another message. But because there’s already a
message in the ring buffer, it doesn’t generate an interrupt.
This is the correct behavior, because the host should only send an
interrupt when the inbound ring buffer transitions from empty to
not-empty. Adding an additional message to a ring buffer that is not
empty is not supposed to generate an interrupt on the guest.
Since the guest is waiting in pread() and not removing messages from
the ring buffer, the pread() waits forever.
This could be easily reproduced in hv_fcopy_uio_daemon if we delay
setting interrupt mask to 0.
Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1,
there’s a race condition. Once user space empties the inbound ring
buffer, but before user space sets interrupt_mask to 0, the host could
put another message in the ring buffer but it wouldn’t interrupt.
Then the next pread() would hang.
Fix these by removing all instances where interrupt_mask is changed,
while keeping the one in set_event() unchanged to enable userspace
control the interrupt mask by writing 0/1 to /dev/uioX.
Fixes: 95096f2fbd ("uio-hv-generic: new userspace i/o driver for VMBus")
Suggested-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Tested-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/20250828044200.492030-1-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74058c0a9f upstream.
Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug.
This is caused by open_by_handle_at() being called with a file handle
containing an invalid parent inode number. In particular the inode number
is that of a symbolic link, rather than a directory.
Squashfs_get_parent() gets called with that symbolic link inode, and
accesses the parent member field.
unsigned int parent_ino = squashfs_i(inode)->parent;
Because non-directory inodes in Squashfs do not have a parent value, this
is uninitialised, and this causes an uninitialised value access.
The fix is to initialise parent with the invalid inode 0, which will cause
an EINVAL error to be returned.
Regular inodes used to share the parent field with the block_list_start
field. This is removed in this commit to enable the parent field to
contain the invalid inode number 0.
Link: https://lkml.kernel.org/r/20250918233308.293861-1-phillip@squashfs.org.uk
Fixes: 122601408d ("Squashfs: export operations")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+157bdef5cf596ad0da2c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68cc2431.050a0220.139b6.0001.GAE@google.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50a098e3e9 upstream.
HP-Spectre 14t-ea100 model has no speaker output unless booting
previously from Windows on dual boot, a reboot while on Linux will
stop the speakers working. Applying the existing quirk for HP Spectre
X360 EU0xxx seems fixing this speaker problem.
Reported-by: Kaden Berger <kadenb816@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/aMxdGAmfOQ6VPNU8@archlinux
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74662f9f92 upstream.
The HP ProDesk 400 (SSID 103c:83f3) also needs a quirk for
enabling HDMI outputs. This patch adds the required quirk
entry.
Signed-off-by: Steven 'Steve' Kendall <skend@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bddf4587c upstream.
After reading all the feedback, right now disabling the TPM2_TCG_HMAC
is the right call.
Other views discussed:
A. Having a kernel command-line parameter or refining the feature
otherwise. This goes to the area of improvements. E.g., one
example is my own idea where the null key specific code would be
replaced with a persistent handle parameter (which can be
*unambigously* defined as part of attestation process when
done correctly).
B. Removing the code. I don't buy this because that is same as saying
that HMAC encryption cannot work at all (if really nitpicking) in
any form. Also I disagree on the view that the feature could not
be refined to something more reasoable.
Also, both A and B are worst options in terms of backporting.
Thuss, this is the best possible choice.
Cc: stable@vger.kernel.or # v6.10+
Fixes: d2add27cf2 ("tpm: Add NULL primary creation")
Suggested-by: Chris Fenner <cfenn@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55c0ced59f ]
When verifying BPF programs, the check_alu_op() function validates
instructions with ALU operations. The 'offset' field in these
instructions is a signed 16-bit integer.
The existing check 'insn->off > 1' was intended to ensure the offset is
either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is
signed, this check incorrectly accepts all negative values (e.g., -1).
This commit tightens the validation by changing the condition to
'(insn->off != 0 && insn->off != 1)'. This ensures that any value
other than the explicitly permitted 0 and 1 is rejected, hardening the
verifier against malformed BPF programs.
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Fixes: ec0e2da95f ("bpf: Support new signed div/mod instructions.")
Link: https://lore.kernel.org/r/tencent_70D024BAE70A0A309A4781694C7B764B0608@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34904582b5 ]
In check_alu_op(), the verifier currently calls check_reg_arg() and
adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations.
However, if the destination register holds a pointer, these scalar
adjustments are unnecessary and potentially incorrect.
This patch adds a check to skip the adjustment logic when the destination
register contains a pointer.
Reported-by: syzbot+d36d5ae81e1b0a53ef58@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d36d5ae81e1b0a53ef58
Fixes: aced132599 ("bpf: Add range tracking for BPF_NEG")
Suggested-by: KaFai Wan <kafai.wan@linux.dev>
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251001191739.2323644-2-listout@listout.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c342bfc99 ]
We will segfault once we call realloc in bpf_get_addrs due to
wrong size argument.
Fixes: 6302bdeb91 ("selftests/bpf: Add a kprobe_multi subtest to use addrs instead of syms")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bad31edf5 ]
We need to get all the kernel function that can be traced sometimes, so we
move the get_syms() and get_addrs() in kprobe_multi_test.c to
trace_helpers.c and rename it to bpf_get_ksyms() and bpf_get_addrs().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250904021011.14069-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 0c342bfc99 ("selftests/bpf: Fix realloc size in bpf_get_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82a8d0fda5 ]
The return value of copy_from_iter and copy_to_iter can't be negative,
check whether the copied lengths are equal.
Fixes: 309bba39c9 ("vringh: iterate on iotlb_translate to handle large translations")
Cc: "Stefano Garzarella" <sgarzare@redhat.com>
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Message-Id: <20250910091739.2999-1-zhangjiao2@cmss.chinamobile.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e9f4faff ]
The bitmap allocated with bitmap_zalloc() in otx2_probe() was not
released in otx2_remove(). Unbinding and rebinding the driver therefore
triggers a kmemleak warning:
unreferenced object (size 8):
backtrace:
bitmap_zalloc
otx2_probe
Call bitmap_free() in the remove path to fix the leak.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Signed-off-by: Bo Sun <bo@mboxify.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd9ea7da41 ]
The bitmap allocated with bitmap_zalloc() in otx2vf_probe() was not
released in otx2vf_remove(). Unbinding and rebinding the driver therefore
triggers a kmemleak warning:
unreferenced object (size 8):
backtrace:
bitmap_zalloc
otx2vf_probe
Call bitmap_free() in the remove path to fix the leak.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Signed-off-by: Bo Sun <bo@mboxify.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25ba2b84c3 ]
Add nfsd_file_dio_alignment and use it to avoid issuing misaligned IO
using O_DIRECT. Any misaligned DIO falls back to using buffered IO.
Because misaligned DIO is now handled safely, remove the nfs modparam
'localio_O_DIRECT_semantics' that was added to require users opt-in to
the requirement that all O_DIRECT be properly DIO-aligned.
Also, introduce nfs_iov_iter_aligned_bvec() which is a variant of
iov_iter_aligned_bvec() that also verifies the offset associated with
an iov_iter is DIO-aligned. NOTE: in a parallel effort,
iov_iter_aligned_bvec() is being removed along with
iov_iter_is_aligned().
Lastly, add pr_info_ratelimited if underlying filesystem returns
-EINVAL because it was made to try O_DIRECT for IO that is not
DIO-aligned (shouldn't happen, so its best to be louder if it does).
Fixes: 3feec68563 ("nfs/localio: add direct IO enablement with sync and async IO support")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d11f6cd1bb ]
Use STATX_DIOALIGN and STATX_DIO_READ_ALIGN to get DIO alignment
attributes from the underlying filesystem and store them in the
associated nfsd_file. This is done when the nfsd_file is first
opened for each regular file.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Stable-dep-of: 25ba2b84c3 ("nfs/localio: avoid issuing misaligned IO using O_DIRECT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f5dacf88a ]
This reverts commit ceddedc969.
Commit in question breaks the mapping of PGs to pools for some SKUs.
Specifically multi-host NICs seem to be shipped with a custom buffer
configuration which maps the lossy PG to pool 4. But the bad commit
overrides this with pool 0 which does not have sufficient buffer space
reserved. Resulting in ~40% packet loss. The commit also breaks BMC /
OOB connection completely (100% packet loss).
Revert, similarly to commit 3fbfe251cc ("Revert "net/mlx5e: Update and
set Xon/Xoff upon port speed set""). The breakage is exactly the same,
the only difference is that quoted commit would break the NIC immediately
on boot, and the currently reverted commit only when MTU is changed.
Note: "good" kernels do not restore the configuration, so downgrade isn't
enough to recover machines. A NIC power cycle seems to be necessary to
return to a healthy state (or overriding the relevant registers using
a custom patch).
Fixes: ceddedc969 ("net/mlx5e: Update and set Xon/Xoff upon MTU set")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250929181529.1848157-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a918911ed ]
Since the bus ops were retired the iommu subsystem changed to using fwspec
to match the iommu driver to the iommu device. If a device has a NULL
fwspec then it is matched to the first iommu driver with a NULL fwspec,
effectively disabling support for systems with more than one non-fwspec
iommu driver.
Thus, if the iommufd selfest are run in an x86 system that registers a
non-fwspec iommu driver they fail to bind their mock devices to the mock
iommu driver.
Fix this by allocating a software fwnode for mock iommu driver's
iommu_device, and set it to the device which mock iommu driver created.
This is done by adding a new helper iommu_mock_device_add() which abuses
the internals of the fwspec system to establish a fwspec before the device
is added and is careful not to leak it. A matching dummy fwspec is
automatically added to the mock iommu driver.
Test by "make -C toosl/testing/selftests TARGETS=iommu run_tests":
PASSED: 229 / 229 tests passed.
In addition, this issue is also can be found on amd platform, and
also tested on a amd machine.
Link: https://patch.msgid.link/r/20250925054730.3877-1-kanie@linux.alibaba.com
Fixes: 17de3f5fdd ("iommu: Retire bus ops")
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Qinyun Tan <qinyuntan@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aff4420ef ]
Software can only initialize the PIR and CIR of the command BD ring after
a FLR, and these two registers can only be set to 0. But the reset values
of these two registers are 0, so software does not need to update them.
If there is no a FLR and PIR and CIR are not 0, resetting them to 0 or
other values by software will cause the command BD ring to work
abnormally. This is because of an internal context in the ring prefetch
logic that will retain the state from the first incarnation of the ring
and continue prefetching from the stale location when the ring is
reinitialized. The internal context can only be reset by the FLR.
In addition, there is a logic error in the implementation, next_to_clean
indicates the software CIR and next_to_use indicates the software PIR.
But the current driver uses next_to_clean to set PIR and use next_to_use
to set CIR. This does not cause a problem in actual use, because the
current command BD ring is only initialized after FLR, and the initial
values of next_to_use and next_to_clean are both 0.
Therefore, this patch removes the initialization of PIR and CIR. Instead,
next_to_use and next_to_clean are initialized by reading the values of
PIR and CIR.
Fixes: 4701073c3d ("net: enetc: add initial netc-lib driver to support NTMP")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250926013954.2003456-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b66169f6b ]
The active-backup bonding mode supports XFRM ESP offload. However, when
a bond is added using command like `ip link add bond0 type bond mode 1
miimon 100`, the `ethtool -k` command shows that the XFRM ESP offload is
disabled. This occurs because, in bond_newlink(), we change bond link
first and register bond device later. So the XFRM feature update in
bond_option_mode_set() is not called as the bond device is not yet
registered, leading to the offload feature not being set successfully.
To resolve this issue, we can modify the code order in bond_newlink() to
ensure that the bond device is registered first before changing the bond
link parameters. This change will allow the XFRM ESP offload feature to be
correctly enabled.
Fixes: 007ab53455 ("bonding: fix feature flag setting at init time")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250925023304.472186-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cfbe7ebfa ]
Add sync reset timeout to stop poll_sync_reset in case there was no
reset done or abort event within timeout. Otherwise poll sync reset will
just continue and in case of fw fatal error no health reporting will be
done.
Fixes: 38b9f903f2 ("net/mlx5: Handle sync reset request event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a0e32b32 ]
The reclaim_pages_cmd() function sends a command to the firmware to
reclaim pages if the command interface is active.
A race condition can occur if the command interface goes down (e.g., due
to a PCI error) while the mlx5_cmd_do() call is in flight. In this
case, mlx5_cmd_do() will return an error. The original code would
propagate this error immediately, bypassing the software-based page
reclamation logic that is supposed to run when the command interface is
down.
Fix this by checking whether mlx5_cmd_do() returns -ENXIO, which mark
that command interface is down. If this is the case, fall through to
the software reclamation path. If the command failed for any another
reason, or finished successfully, return as before.
Fixes: b898ce7bcc ("net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1f0349bd6 ]
Stop polling on firmware response to command in polling mode if the
command interface got down. This situation can occur, for example, if a
firmware fatal error is detected during polling.
This change halts the polling process when the command interface goes
down, preventing unnecessary waits.
Fixes: b898ce7bcc ("net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8169a6011c ]
The driver did not handle failure of `netdev_alloc_skb_ip_align()`.
If the allocation failed, dereferencing `skb->protocol` could lead to
a NULL pointer dereference.
This patch tries to allocate `skb`. If the allocation fails, it falls
back to the normal path.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250928190124.1156-1-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f017156aea ]
In EC2 instances where the RSS hash key is not configurable, ethtool
shows bogus RSS hash key since ena_get_rxfh_key_size() unconditionally
returns ENA_HASH_KEY_SIZE.
Commit 6a4f7dc82d ("net: ena: rss: do not allocate key when not
supported") added proper handling for devices that don't support RSS
hash key configuration, but ena_get_rxfh_key_size() has been unchanged.
When the RSS hash key is not configurable, return 0 instead of
ENA_HASH_KEY_SIZE to clarify getting the value is not supported.
Tested on m5 instance families.
Without patch:
# ethtool -x ens5 | grep -A 1 "RSS hash key"
RSS hash key:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
With patch:
# ethtool -x ens5 | grep -A 1 "RSS hash key"
RSS hash key:
Operation not supported
Fixes: 6a4f7dc82d ("net: ena: rss: do not allocate key when not supported")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Link: https://patch.msgid.link/20250929050247.51680-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8425161ac1 ]
The nfp_net_get_rxfh_key_size() function returns -EOPNOTSUPP when
devices don't support RSS, and callers treat the negative value as a
large positive value since the return type is u32.
Return 0 when devices don't support RSS, aligning with the ethtool
interface .get_rxfh_key_size() that requires returning 0 in such cases.
Fixes: 9ff304bfaf ("nfp: add support for reporting CRC32 hash function")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Link: https://patch.msgid.link/20250929054230.68120-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f017c1f768 ]
Some applications are stuck to the 20th century and still use
small SO_RCVBUF values.
After the blamed commit, we can drop packets especially
when using LRO/hw-gro enabled NIC and small MSS (1500) values.
LRO/hw-gro NIC pack multiple segments into pages, allowing
tp->scaling_ratio to be set to a high value.
Whenever the receive queue gets full, we can receive a small packet
filling RWIN, but with a high skb->truesize, because most NIC use 4K page
plus sk_buff metadata even when receiving less than 1500 bytes of payload.
Even if we refine how tp->scaling_ratio is estimated,
we could have an issue at the start of the flow, because
the first round of packets (IW10) will be sent based on
the initial tp->scaling_ratio (1/2)
Relax tcp_can_ingest() to use skb->len instead of skb->truesize,
allowing the peer to use final RWIN, assuming a 'perfect'
scaling_ratio of 1.
Fixes: 1d2fbaad7c ("tcp: stronger sk_rcvbuf checks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250927092827.2707901-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9bd25f47e ]
The mailbox receive path allocates coherent DMA memory with
dma_alloc_coherent(), but frees it with dmam_free_coherent().
This is incorrect since dmam_free_coherent() is only valid for
buffers allocated with dmam_alloc_coherent().
Fix the mismatch by using dma_free_coherent() instead of
dmam_free_coherent
Fixes: e54232da12 ("idpf: refactor idpf_recv_mb_msg")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Link: https://patch.msgid.link/20250925180212.415093-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfcd6cab2f ]
The probe() function prints "pm_runtime_get_sync failed" when
j721e_pcie_ctrl_init() returns an error. This is misleading since
the failure is not from pm_runtime, but from the controller init
routine. Update the error message to correctly reflect the source.
No functional changes.
Fixes: f3e25911a4 ("PCI: j721e: Add TI J721E PCIe driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250905211436.3048282-1-alok.a.tiwari@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ed4728eb9 ]
In case of a jump to the err label due to atmel_nand_create() or
atmel_nand_controller_add_nand() failure, the reference to nand_np
need to be released
Use for_each_child_of_node_scoped() to fix the issue.
Fixes: f88fc122cc ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
