Merge series from Gabor Juhos <j4g8y7@gmail.com>:
The 'spi-qpic-nand' driver may cause memory corruption under some
circumstances. The first patch in the series changes the driver to
avoid that, whereas the second adds some sanity checks to the common
QPIC code in order to make detecting such errors easier in the future.
The following error has been reported sporadically by CI when a test
unbinds the i915 driver on a ring submission platform:
<4> [239.330153] ------------[ cut here ]------------
<4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count)
<4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330942] Call Trace:
<4> [239.330944] <TASK>
<4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915]
<4> [239.331202] i915_driver_release+0x86/0xa0 [i915]
<4> [239.331482] devm_drm_dev_init_release+0x61/0x90
<4> [239.331494] devm_action_release+0x15/0x30
<4> [239.331504] release_nodes+0x3d/0x120
<4> [239.331517] devres_release_all+0x96/0xd0
<4> [239.331533] device_unbind_cleanup+0x12/0x80
<4> [239.331543] device_release_driver_internal+0x23a/0x280
<4> [239.331550] ? bus_find_device+0xa5/0xe0
<4> [239.331563] device_driver_detach+0x14/0x20
...
<4> [357.719679] ---[ end trace 0000000000000000 ]---
If the test also unloads the i915 module then that's followed with:
<3> [357.787478] =============================================================================
<3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown()
<3> [357.788031] -----------------------------------------------------------------------------
<3> [357.788204] Object 0xffff888109e7f480 @offset=29824
<3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244
<4> [357.788994] i915_vma_instance+0xee/0xc10 [i915]
<4> [357.789290] init_status_page+0x7b/0x420 [i915]
<4> [357.789532] intel_engines_init+0x1d8/0x980 [i915]
<4> [357.789772] intel_gt_init+0x175/0x450 [i915]
<4> [357.790014] i915_gem_init+0x113/0x340 [i915]
<4> [357.790281] i915_driver_probe+0x847/0xed0 [i915]
<4> [357.790504] i915_pci_probe+0xe6/0x220 [i915]
...
Closer analysis of CI results history has revealed a dependency of the
error on a few IGT tests, namely:
- igt@api_intel_allocator@fork-simple-stress-signal,
- igt@api_intel_allocator@two-level-inception-interruptible,
- igt@gem_linear_blits@interruptible,
- igt@prime_mmap_coherency@ioctl-errors,
which invisibly trigger the issue, then exhibited with first driver unbind
attempt.
All of the above tests perform actions which are actively interrupted with
signals. Further debugging has allowed to narrow that scope down to
DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring
submission, in particular.
If successful then that function, or its execlists or GuC submission
equivalent, is supposed to be called only once per GEM context engine,
followed by raise of a flag that prevents the function from being called
again. The function is expected to unwind its internal errors itself, so
it may be safely called once more after it returns an error.
In case of ring submission, the function first gets a reference to the
engine's legacy timeline and then allocates a VMA. If the VMA allocation
fails, e.g. when i915_vma_instance() called from inside is interrupted
with a signal, then ring_context_alloc() fails, leaving the timeline held
referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the
timeline is got, and only that last one is put on successful completion.
As a consequence, the legacy timeline, with its underlying engine status
page's VMA object, is still held and not released on driver unbind.
Get the legacy timeline only after successful allocation of the context
engine's VMA.
v2: Add a note on other submission methods (Krzysztof Karas):
Both execlists and GuC submission use lrc_alloc() which seems free
from a similar issue.
Fixes: 75d0a7f31e ("drm/i915: Lift timeline into intel_context")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250611104352.1014011-2-janusz.krzysztofik@linux.intel.com
Unlocking the resv object was missing in the error path, additionally to
that we should move over the resource only after the fence slot was
reserved.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Fixes: c8d4c18bfb ("dma-buf/drivers: make reserving a shared slot mandatory v4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20250616130726.22863-3-christian.koenig@amd.com
Add a wrapper for fsleep(), flexible sleep functions in
include/linux/delay.h which typically deals with hardware delays.
The kernel supports several sleep functions to handle various lengths
of delay. This adds fsleep(), automatically chooses the best sleep
method based on a duration.
fsleep() can only be used in a nonatomic context. This requirement is
not checked by these abstractions, but it is intended that klint [1]
or a similar tool will be used to check it in the future.
Link: https://rust-for-linux.com/klint [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250617144155.3903431-3-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Refactor the pci1xxxx SPI driver to allow overlapping DMA read and
write operations across SPI transfers. This improves throughput and
reduces idle time between SPI transactions.
Transfer sequence:
- Start with a DMA read to load TX data from host to device buffer.
- After DMA read completes, trigger the SPI transfer.
- On SPI completion:
- Start DMA write to copy received data from RX buffer to host.
- Start the next DMA read to prepare TX data for the following transfer.
- Begin the next SPI transfer after both DMA write and read complete.
To implement this sequence, the following changes were made:
- Added dma_completion_count to track and synchronize DMA completions.
- Split DMA setup into separate functions for TX (read) and RX (write).
- Introduced separate spinlocks for safe access to RD and WR DMA registers.
This new flow enables efficient pipelining by overlapping data
preparation and completion stages, leading to better SPI transfer
performance and utilization of DMA engines.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250630073233.7356-1-thangaraj.s@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Even the kerneldoc says that with a zero timeout the function should not
wait for anything, but still return 1 to indicate that the fences are
signaled now.
Unfortunately that isn't what was implemented, instead of only returning
1 we also waited for at least one jiffies.
Fix that by adjusting the handling to what the function is actually
documented to do.
v2: improve code readability
Reported-by: Marek Olšák <marek.olsak@amd.com>
Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20250129105841.1806-1-christian.koenig@amd.com
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095107.804-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095822.868-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629094803.776-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes a logic issue in mlxreg_lc_completion_notify() where the
intention was to check if MLXREG_LC_POWERED flag is not set before
powering on the device.
The original code used "state & ~MLXREG_LC_POWERED" to check for the
absence of the POWERED bit. However this condition evaluates to true
even when other bits are set, leading to potentially incorrect
behavior.
Corrected the logic to explicitly check for the absence of
MLXREG_LC_POWERED using !(state & MLXREG_LC_POWERED).
Fixes: 62f9529b8d ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250630105812.601014-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
loongarch and mips both support hardware that uses the i2c-piix4 driver.
It should not be restricted to x86, so drop the x86 dependency.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdVPQLjOox5sMp34Z5MTwKv2WOpHa=MpZr8hWG22fQKcjw@mail.gmail.com/
Fixes: 7e173eb82a ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82a
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Prevent downstream crates or drivers from implementing `HrTimerMode`
for arbitrary types, which could otherwise leads to unsupported
behavior.
Introduce a `private::Sealed` trait and implement it for all types
that implement `HrTimerMode`.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250617232806.3950141-1-fujita.tomonori@gmail.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add ovc-capacity-table info to the generic battery nodes.
The values come from the ug3105 driver which currently hardcodes these
values. The ug3105 driver will be modified to stop hardcoding this and
instead get the values from device-properties.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250609104620.25896-2-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the asus_tf103c_battery_node to shared-psy-info.c and rename it to
generic_lipo_4v2_battery_node.
This is a preparation patch for adding ovc-capacity-table info to
the battery nodes.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250609104620.25896-1-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
eMMC HS200 mode (1.8V I/O) is supported by the MMC host controller on
RK3528 and works with the optional on-board eMMC module on Radxa E20C.
Be explicit about HS200 support in the device tree for Radxa E20C.
Fixes: 3a01b5f14a ("arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250621165832.2226160-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ArmSoM Sige7 has onboard AP6275P Wi-Fi6 (PCIe) and BT5 (UART) module
which is similar with Khadas Edge2. This commit enables bluetooth
at uart6.
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Link: https://lore.kernel.org/r/20250621135319.61766-1-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RADXA ROCK 4D board has a PCIe controller connected to a flat flex
connector, compatible with the one the RPi5 uses.
Enable the associated combphy and pcie controller node, as well as add
the remaining pinctrl definition for the reset.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250621-rk3576-rock4d-pcie-v1-1-2b33c9f12955@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Since commit c871a311ed ("phy: rockchip: samsung-hdptx: Setup TMDS
char rate via phy_configure_opts_hdmi"), the workaround of passing the
rate from DW HDMI QP bridge driver via phy_set_bus_width() became
partially broken, as it cannot reliably handle mode switches anymore.
Attempting to fix this up at PHY level would not only introduce
additional hacks, but it would also fail to adequately resolve the
display issues that are a consequence of the system CRU limitations.
Instead, proceed with the solution already implemented for RK3588: make
use of the HDMI PHY PLL as a better suited DCLK source for VOP2. This
will not only address the aforementioned problem, but it should also
facilitate the proper operation of display modes up to 4K@60Hz.
It's worth noting that anything above 4K@30Hz still requires high TMDS
clock ratio and scrambling support, which hasn't been mainlined yet.
Fixes: d74b842cab ("arm64: dts: rockchip: Add vop for rk3576")
Cc: stable@vger.kernel.org
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-By: Detlev Casanova <detlev.casanova@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250612-rk3576-hdmitx-fix-v1-3-4b11007d8675@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As with the RK3588 SoC, the HDMI PHY PLL on RK3576 can be used as a more
accurate pixel clock source for VOP2, which is actually mandatory to
ensure proper support for display modes handling.
Add the missing #clock-cells property to allow using the clock provider
functionality of HDMI PHY.
Fixes: ad0ea230ab ("arm64: dts: rockchip: Add hdmi for rk3576")
Cc: stable@vger.kernel.org
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250612-rk3576-hdmitx-fix-v1-2-4b11007d8675@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently when xdp_rxq_info_reg_mem_model() fails in the XSK path, the
error handling incorrectly jumps to err_destroy_page_pool. While this
may not cause errors, we should make it jump to the correct location.
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As with the RK3588 SoC, RK3576 also allows the use of HDMI PHY PLL as an
alternative and more accurate pixel clock source for VOP2.
Document the optional PLL clock property.
Moreover, given that this is part of a series intended to address some
recent display problems, provide the appropriate tags to facilitate
backporting.
Fixes: c3b7c5a4d7 ("dt-bindings: display: vop2: Add rk3576 support")
Cc: stable@vger.kernel.org
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250612-rk3576-hdmitx-fix-v1-1-4b11007d8675@collabora.com
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-3-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-2-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a34fc329b1 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-1-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some Amlogic clock controller drivers have a dedicated headers file, some
do not. Over time, these headers have evolved and now only carry register
offset definitions. These offsets are only used by the related controller
and are not meant to be shared.
These headers are not serving any purpose now.
Start enforcing some consistency between the different Amlogic clock
drivers and move the register offset definitions to the related driver.
Link: https://lore.kernel.org/r/20250623-clk-meson-no-headers-v1-1-468161a7279e@baylibre.com
[jbrunet: checkpatch strict: removed extra blank line]
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Enable the rockchip-dfi driver as a module, which is used on RK3588 as
well as RK3568 and RK3399 to measure memory bandwidth. For this, we also
enable PM_DEVFREQ_EVENT, which is a requirement for this driver.
Also enable the rockchip-rga driver as a module, which is used on
various Rockchip SoCs, including RK3588 and RK3399, to provide 2d
accelerated image transformations through a V4L2 interface.
Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250626-rk3588-defconfig-v2-1-ae6720964b01@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Quartz 64 Model-A Schematic from 20210427 on page 7 shows that the
fan's power supply is provided by VCC12V_DCIN.
This fixes the following warning:
gpio-fan gpio_fan: supply fan not found, using dummy regulator
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250628142843.839150-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Hardware CS has a very slow rise time of about 6us,
causing transmission errors when CS does not reach
high between transaction.
It looks like it's not driven actively when transitioning
from low to high but switched to input, so only the CPU
pull-up pulls it high, slowly. Transitions from high to low
are fast. On the oscilloscope, CS looks like an irregular sawtooth
pattern like this:
_____
^ / |
^ /| / |
/| / | / |
/ | / | / |
___/ |___/ |_____/ |___
With cs-gpios we have a CS rise time of about 20ns, as it should be,
and CS looks rectangular.
This fixes the data errors when running a flashcp loop against a
m25p40 spi flash.
With the Rockchip 6.1 kernel we see the same slow rise time, but
for some reason CS is always high for long enough to reach a solid
high.
The RK3399 and RK3588 SoCs use the same SPI driver, so we also
checked our "Puma" (RK3399) and "Tiger" (RK3588) boards.
They do not have this problem. Hardware CS rise time is good.
Fixes: c484cf93f6 ("arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard")
Cc: stable@vger.kernel.org
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Link: https://lore.kernel.org/r/20250627131715.1074308-1-jakob.unterwurzacher@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Existing swnode graph format is specific to sensor device
and is causing conflicts when accessing standard property
variables outside the sensor driver.
To address this issue, enhanced swnode graph format with
dedicated nodes for i2c and isp devices, with sensor node
added as child to i2c node. This approach allows to have
standard property variables (ex: 'clock-frequency') with
values applicable for each of the devices (sensor, i2c and
isp).
ACPI device driver_data handle is also initialized with root
camera swnode to access the property variables in the graph
in isp and i2c drivers.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250618202958.3934822-1-pratap.nirujogi@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After retrieving WMI data blocks in sysfs callbacks, check for the
validity of them before dereferencing their content.
Reported-by: Jan Graczyk <jangraczyk@yahoo.ca>
Closes: https://lore.kernel.org/r/CAHk-=wgMiSKXf7SvQrfEnxVtmT=QVQPjJdNjfm3aXS7wc=rzTw@mail.gmail.com/
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-sysman-fix-v2-1-d185674d0a30@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, Ultrajoiner is supported only on Xe2_HPD.
Update the HAS_ULTRAJOINER macro to reflect the same.
v2: Clarify the commit message to specify platform. (Jani)
Bspec: 69556
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Link: https://lore.kernel.org/r/20250611053039.377695-1-ankit.k.nautiyal@intel.com
commit 3172fb9866 ("perf/core: Fix WARN in perf_cgroup_switch()") try to
fix a concurrency problem between perf_cgroup_switch and
perf_cgroup_event_disable. But it does not to move the WARN_ON_ONCE into
lock-protected region, so the warning is still be triggered.
Fixes: 3172fb9866 ("perf/core: Fix WARN in perf_cgroup_switch()")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250626135403.2454105-1-luogengkun@huaweicloud.com
Previously we were filtering out only upper unsupported sampling rates.
This patch adds filtering of the lower unsupported sampling rates. As a
result there is 1:1 mapping between altsetting and supported rates.
The issue was found on a Scarlett 3rd Gen card (see linked bug), but the
same filtering is likely needed for the Scarlett 1st and 2nd Gen as well
as the older Clarett cards which lacks Valid Alternate Setting Control.
Patch was not tested on a real hardware.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214493
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://patch.msgid.link/20250630013357.1327420-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of using 0 and 1 as magic numbers, let's add proper defines
whose names tell the reader what the meaning behind them is.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250624-pwrseq-match-defines-v1-3-a59d90a951f1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The subdev core now limits the number of active routes to
V4L2_FRAME_DESC_ENTRY_MAX. Drop the duplicated check in the max96714
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The subdev core now limits the number of active routes to
V4L2_FRAME_DESC_ENTRY_MAX. Drop the duplicated check in the ds90ub960
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The subdev core now limits the number of active routes to
V4L2_FRAME_DESC_ENTRY_MAX. Drop the duplicated check in the ds90ub953
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The subdev core now limits the number of active routes to
V4L2_FRAME_DESC_ENTRY_MAX. Drop the duplicated check in the ds90ub913
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Drivers that implement routing need to report a frame descriptor
accordingly, with up to one entry per route. The number of frame
descriptor entries is fixed to V4L2_FRAME_DESC_ENTRY_MAX, currently
equal to 8. Multiple drivers therefore limit the number of routes to
V4L2_FRAME_DESC_ENTRY_MAX, with a note indicating that the limit should
be lifted when frame descriptor entries will be allocated dynamically.
Duplicating the check in multiple drivers isn't ideal. Move it to the
VIDIOC_SUBDEV_S_ROUTING handling code in the v4l2-subdev core.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Factorize code and prevent future errors in case of media bus codes
change. Rename VD55G1_DEFAULT_MODE to VD55G1_MODE_DEF to mimic other
macros and reduce vd55g1_update_img_pad_format() name to
vd55g1_update_pad_fmt() to stay within the 80 characters limit.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Proper clock configuration is required to advance through FSM states.
Prior than this having a different clock value than default sensor's
value was used (12 MHz) could prevent the sensor from booting.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
