gs101 (Google Pixel 6 and Pixel 6 Pro) supports cold- and warm-reboot.
Cold-reset is useful because it is more secure, e.g. wiping all RAM
contents, while the warm-reboot allows RAM contents to be retained
across the reboot, e.g. to collect potential crash information.
Add the required DT changes to switch to the gs101-specific reboot
method, which knows how to issue either reset as requested by the OS.
The PMIC plays a role in this as well, so mark it as
'system-power-controller', which in this case ensures that the device
will wake up again after a cold-reboot, ensuring the full power-cycle
is successful.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250627-gs101-reboot3-v1-3-c3ae49657b1f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On Pixel 6 (and Pro), a Samsung S2MPG10 is used as main PMIC, which
contains the following functional blocks:
* common / speedy interface
* regulators
* 3 clock outputs
* RTC
* power meters
* GPIO interfaces
This change enables the PMIC itself and the RTC. We're still working on
the remaining parts or waiting for bindings to be merged, hence only a
small subset of the functional is being enabled.
The regulators fall into the same category (still being finalised), but
since the binding requires a 'regulators' node, an empty node is being
added to avoid validation errors at this stage.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250627-gs101-reboot3-v1-2-c3ae49657b1f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Enable the Samsung s2mpg1x driver as this is used by the gs101-oriole
and gs101-raven (Google Pixel 6 and Pixel 6 Pro) boards.
It communicates over ACPM instead of I2C, hence the additional
defconfig item.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250627-gs101-reboot3-v1-1-c3ae49657b1f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ufs-exynos driver configures the sysreg shareability as
cacheable for gs101 so we need to set the dma-coherent
property so the descriptors are also allocated cacheable.
This fixes the UFS stability issues we have seen with
the upstream UFS driver on gs101.
Fixes: 4c65d7054b ("arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes")
Cc: stable@vger.kernel.org
Suggested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Tested-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250314-ufs-dma-coherent-v1-1-bdf9f9be2919@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Commit 77ba0b8562 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct
intel_display") added a to_intel_display(connector) call to
vlv_dphy_param_init() but when vlv_dphy_param_init() gets called
the connector object has not been initialized yet, so this leads
to a NULL pointer deref:
BUG: kernel NULL pointer dereference, address: 000000000000000c
...
Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.314 08/13/2015
RIP: 0010:vlv_dsi_init+0x4e6/0x1600 [i915]
...
Call Trace:
<TASK>
? intel_step_name+0x4be8/0x5c30 [i915]
intel_setup_outputs+0x2d6/0xbd0 [i915]
intel_display_driver_probe_nogem+0x13f/0x220 [i915]
i915_driver_probe+0x3d9/0xaf0 [i915]
Use to_intel_display(&intel_dsi->base) instead to fix this.
Fixes: 77ba0b8562 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250626143317.101706-1-hansg@kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 0dc6bfb50a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest().
The __mock_request_alloc() function implements the
smoketest->request_alloc() function pointer. It was supposed to return
error pointers, but it propogates the NULL return from mock_request()
so in the event of a failure, it would lead to a NULL pointer
dereference.
To fix this, change the mock_request() function to return error pointers
and update all the callers to expect that.
Fixes: 52c0fdb25c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 778fa8ad5f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If gtk_tree_model_get_iter() fails, gtk_tree_path_free() is not called.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
The variable "resizeable" is a typo and always set to FALSE, resulting
in dead code in init_right_tree(). It is unclear column resizing should
be disabled. Enable it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
This helper returns the parent menu, or NULL if there is no parent.
The main difference from the previous version is that it always returns
the parent menu even when the given argument is itself a menu.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
The current menu_get_parent_menu() does not always return the parent
menu; if the given argument is itself a menu, it returns that menu.
Rename this function to better reflect this behavior.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Watchdog doesn't work on NXP ls1046ardb board because in commit
7c8ffc5555cb("arm64: dts: layerscape: remove big-endian for mmc nodes"),
it intended to remove the big-endian from mmc node, but the big-endian of
watchdog node is also removed by accident. So, add watchdog big-endian
property back.
In addition, add compatible string fsl,ls1046a-wdt, which allow big-endian
property.
Fixes: 7c8ffc5555 ("arm64: dts: layerscape: remove big-endian for mmc nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
It is useful to display the selected choice's value in the Value column.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
When you select "Show All Options" or "Show Prompt Options", choice
entries display a check box icon, but this has no point because
choice is always y since commit fde192511b ("kconfig: remove tristate
choice support").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
The overshoot of MDIO, MDC, ENET1_TDx and ENET2_TDx is too high, so
reduce the drive strength of these pins.
Fixes: e3e8b199af ("arm64: dts: imx95: Add imx95-15x15-evk support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The overshoot of MDIO, MDC and ENET1_TDx is too high, so reduce the drive
strength these pins.
Fixes: 025cf78938 ("arm64: dts: imx95-19x19-evk: add ENETC 0 support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PDM micphone sound card support, configure the pinmux.
This sound card supports recording sound from PDM microphone and convert
the PDM format data to PCM data.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add bt-sco sound card, which is used by BT HFP case.
It supports wb profile as default.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add WM8962 codec connected to SAI1 interface.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add i2c io expander support for imx943 evk board.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add lpi2c and i2c-mux support for imx943 evk board.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add micfil and mqs device nodes
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the NXP S32G RTC driver as maintained so further patches on this
driver can be reviewed under this architecture.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The number of external channels is assumed to be a multiple of 10,
but this is not the case for IQS7222D. As a result, some CRx pins
are wrongly prevented from being assigned to some channels.
Address this problem by explicitly defining the number of external
channels for cases in which the number of external channels is not
equal to the total number of available channels.
Fixes: dd24e202ac ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aGHVf6HkyFZrzTPy@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are designs incorporating Goodix touch controller that do not
connect interrupt pin, for example Raspberry Pi. To support such systems
use polling mode for the input device when I2C client does not have
interrupt assigned to it.
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250522020418.1963422-1-qijian.guo@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move the definition of the function ata_eh_set_lpm() to avoid its
unnecessary forward declaration and rename the function to
ata_eh_link_set_lpm() to clarify that it acts on a link.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Despite its name, the mobile_lpm_policy module parameter defines the
default LPM policy to use for an AHCI adapter for all chipsets,
including desktop and server chipsets. Clarify this point in the
parameter description.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Improve the comment describing enum ata_lpm_policy and add comments
within that enum to describe each of the different possible values.
The enum values comments match the description given for the
CONFIG_SATA_MOBILE_LPM_POLICY config parameter.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Improve the description of the possible default SATA link power
management policies and add the missing description for policy 5.
No functional changes.
Fixes: a5ec5a7bfd ("ata: ahci: Support state with min power but Partial low power state")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Change the function ata_scsi_offline_dev() to return a bool and change
this function kdoc comment to have the correct mention of its call site.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
The ATA device flag ATA_DFLAG_ZAC is used to indicate if a devie is a
host managed or host aware zoned device. However, this flag is not used
in the hot path and only used during device scanning/revalidation and
for inquiry and sense SCSI command translation.
Save one bit from struct ata_device flags field by replacing this flag
with the internal helper function ata_dev_is_zac(). This function
returns true if the device class is ATA_DEV_ZAC (host managed ZAC device
case) or if its identify data reports it supports the zoned command set
(host aware ZAC device case).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
The GitLab runner tags are case sensitive, and Flip-hatch's tag was
incorrectly lowercase. This prevented jobs from being picked up
by the runner. Fix the runner tag for Flip-hatch.
Based on 03b480d3
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
We are holding namespace_sem shared and we have not done any group
id allocations since we grabbed it. Therefore IS_MNT_SHARED(m)
is equivalent to non-zero m->mnt_group_id.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All places where we call set_mnt_shared() are guaranteed to have
non-zero ->mnt_group_id - either by explicit test, or by having
done successful invent_group_ids() covering the same mount since
we'd grabbed namespace_sem.
The opposite combination (non-zero ->mnt_group_id and !IS_MNT_SHARED())
*is* possible - it means that we have allocated group id, but didn't
get around to set_mnt_shared() yet; such state is transient -
by the time we do namespace_unlock(), we must either do set_mnt_shared()
or unroll the group id allocations by cleanup_group_ids().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
the only difference between it and CL_SLAVE is in this predicate
in clone_mnt():
if ((flag & CL_SLAVE) ||
((flag & CL_SHARED_TO_SLAVE) && IS_MNT_SHARED(old))) {
However, in case of CL_SHARED_TO_SLAVE we have not allocated any
mount group ids since the time we'd grabbed namespace_sem, so
IS_MNT_SHARED() is equivalent to non-zero ->mnt_group_id. And
in case of CL_SLAVE old has come either from the original tree,
which had ->mnt_group_id allocated for all nodes or from result
of sequence of CL_MAKE_SHARED or CL_MAKE_SHARED|CL_SLAVE copies,
ultimately going back to the original tree. In both cases we are
guaranteed that old->mnt_group_id will be non-zero.
In other words, the predicate is always equal to
(flags & (CL_SLAVE | CL_SHARED_TO_SLAVE)) && old->mnt_group_id
and with that replacement CL_SLAVE and CL_SHARED_TO_SLAVE have exact
same behaviour.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Freeing of a namespace must be delayed until after we'd dealt with mount
notifications (in namespace_unlock()). The reasons are not immediately
obvious (they are buried in ->prev_ns handling in mnt_notify()), and
having that free_mnt_ns() explicitly called after namespace_unlock()
is asking for trouble - it does feel like they should be OK to free
as soon as they've been emptied.
Make the things more explicit by setting 'emptied_ns' under namespace_sem
and having namespace_unlock() free the sucker as soon as it's safe to free.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The only place that really needs to be adjusted is commit_tree() -
there we need to iterate through the copy and we might as well
use next_mnt() for that. However, in case when our tree has been
slid under something already mounted (propagation to a mountpoint
that already has something mounted on it or a 'beneath' move_mount)
we need to take care not to walk into the overmounting tree.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Lift calculation of replacement propagation source, removal from
peer group and assignment of ->mnt_master from do_make_slave() into
change_mnt_propagation() itself. What remains is switching of
what used to get propagation *through* mnt to alternative source.
Rename to transfer_propagation(), passing it the replacement source
as the second argument. Have it return void, while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When mount changes propagation type so that it doesn't propagate
events any more (MS_PRIVATE, MS_SLAVE, MS_UNBINDABLE), we need
to make sure that event propagation between other mounts is
unaffected.
We need to make sure that events from peers and master of that mount
(if any) still reach everything that used to be on its ->mnt_slave_list.
If mount has neither peers nor master, we simply need to dissolve
its ->mnt_slave_list and clear ->mnt_master of everything in there.
If mount has peers, we transfer everything in ->mnt_slave_list of
this mount into that of some of those peers (and adjust ->mnt_master
accordingly).
If mount has a master but no peers, we transfer everything in
->mnt_slave_list of this mount into that of its master (adjusting
->mnt_master, etc.).
There are two problems with the current implementation:
* there's a long-obsolete logics in choosing the peer -
once upon a time it made sense to prefer the peer that had the
same ->mnt_root as our mount, but that had been pointless since
2014 ("smarter propagate_mnt()")
* the most common caller of that thing is umount_tree()
taking the mounts out of propagation graph. In that case it's
possible to have ->mnt_slave_list contents moved many times,
since the replacement master is likely to be taken out by the
same umount_tree(), etc.
Take the choice of replacement master into a separate function
(propagation_source()) and teach it to skip the candidates that
are going to be taken out.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... since mnt->mnt_share and mnt->mnt_slave_list are guaranteed to be empty unless
IS_MNT_SHARED(mnt).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Mountpoint is passed as struct mountpoint *, not struct dentry *
(and called dest_mp, not dest_dentry) since 2013.
Roots of created copies are linked via mnt_hash, not mnt_list since
a bit before the merge into mainline back in 2005.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Its only use is choosing the type of copy - CL_MAKE_SHARED if there
already is a copy in that peer group, CL_SLAVE or CL_SLAVE | CL_MAKE_SHARED
otherwise.
But that's easy to keep track of - just set type in the beginning of group
and reset to CL_MAKE_SHARED after the first created secondary in it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
this stuff can be local in propagate_mnt() now (and in some cases
duplicates the existing variables there)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
