Only use the ms granularity wait in snb_pcode_write_timeout(), primarily
to better align with the xe driver, which also only has the millisecond
wait.
Use an arbitrary 250 us fast wait before the specified ms wait, and have
snb_pcode_write() default to 1 ms.
This means snb_pcode_write() and snb_pcode_write_timeout() will always
be sleeping functions. There should not be any atomic users for pcode
writes though, and any display code using pcode via xe has already been
non-atomic. The uncore wait will do a might_sleep() annotation that
should catch any problems.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/ba86280f53cea2d020308db35f1ecbd615d07d8a.1750678991.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Information parsed from the display EDID should be stored in display
info. Move HDR sink metadata there.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250519112900.1383997-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The PMU table in the FWSEC image has to be located to locate the start
of the Falcon ucode in the same or another FWSEC image. Add support for
the same.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-18-ecf41ef99252@nvidia.com
[ Re-format and use markdown in comments. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add support for navigating the VBIOS images required for extracting
ucode data for GSP to boot. Later patches will build on this.
Debug log messages will show the BIOS images:
[102141.013287] NovaCore: Found BIOS image at offset 0x0, size: 0xfe00, type: PciAt
[102141.080692] NovaCore: Found BIOS image at offset 0xfe00, size: 0x14800, type: Efi
[102141.098443] NovaCore: Found BIOS image at offset 0x24600, size: 0x5600, type: FwSec
[102141.415095] NovaCore: Found BIOS image at offset 0x29c00, size: 0x60800, type: FwSec
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Shirish Baskaran <sbaskaran@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Timur Tabi <ttabi@nvidia.com>
Cc: Ben Skeggs <bskeggs@nvidia.com>
[ acourbot@nvidia.com: fix clippy warnings, read_more() function ]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-17-ecf41ef99252@nvidia.com
[ Replace extend_with() and copy_from_slice() with extend_from_slice();
re-format and use markdown in comments. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XLWR
-----END PGP SIGNATURE-----
Merge tag 'for-6.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes:
- fix invalid inode pointer dereferences during log replay
- fix a race between renames and directory logging
- fix shutting down delayed iput worker
- fix device byte accounting when dropping chunk
- in zoned mode, fix offset calculations for DUP profile when
conventional and sequential zones are used together
Regression fixes:
- fix possible double unlock of extent buffer tree (xarray
conversion)
- in zoned mode, fix extent buffer refcount when writing out extents
(xarray conversion)
Error handling fixes and updates:
- handle unexpected extent type when replaying log
- check and warn if there are remaining delayed inodes when putting a
root
- fix assertion when building free space tree
- handle csum tree error with mount option 'rescue=ibadroot'
Other:
- error message updates: add prefix to all scrub related messages,
include other information in messages"
* tag 'for-6.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix alloc_offset calculation for partly conventional block groups
btrfs: handle csum tree error with rescue=ibadroots correctly
btrfs: fix race between async reclaim worker and close_ctree()
btrfs: fix assertion when building free space tree
btrfs: don't silently ignore unexpected extent type when replaying log
btrfs: fix invalid inode pointer dereferences during log replay
btrfs: fix double unlock of buffer_tree xarray when releasing subpage eb
btrfs: update superblock's device bytes_used when dropping chunk
btrfs: fix a race between renames and directory logging
btrfs: scrub: add prefix for the error messages
btrfs: warn if leaking delayed_nodes in btrfs_put_root()
btrfs: fix delayed ref refcount leak in debug assertion
btrfs: include root in error message when unlinking inode
btrfs: don't drop a reference if btrfs_check_write_meta_pointer() fails
George Moussalem says:
====================
Add support for the IPQ5018 Internal GE PHY
The IPQ5018 SoC contains an internal Gigabit Ethernet PHY with its
output pins that provide an MDI interface to either an external switch
in a PHY to PHY link architecture or directly to an attached RJ45
connector.
The PHY supports 10BASE-T/100BASE-TX/1000BASE-T link modes in SGMII
interface mode, CDT, auto-negotiation and 802.3az EEE.
The LDO controller found in the IPQ5018 SoC needs to be enabled to drive
power to the CMN Ethernet Block (CMN BLK) which the GE PHY depends on.
The LDO must be enabled in TCSR by writing to a specific register.
In a phy to phy architecture, DAC values need to be set to accommodate
for the short cable length.
====================
Link: https://patch.msgid.link/20250613-ipq5018-ge-phy-v5-0-9af06e34ea6b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IPQ5018 SoC contains a single internal Gigabit Ethernet PHY which
provides an MDI interface directly to an RJ45 connector or an external
switch over a PHY to PHY link.
The PHY supports 10BASE-T/100BASE-TX/1000BASE-T link modes in SGMII
interface mode, CDT, auto-negotiation and 802.3az EEE.
Let's add support for this PHY in the at803x driver as it falls within
the Qualcomm Atheros OUI.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20250613-ipq5018-ge-phy-v5-2-9af06e34ea6b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document the IPQ5018 Internal Gigabit Ethernet PHY found in the IPQ5018
SoC. Its output pins provide an MDI interface to either an external
switch in a PHY to PHY link scenario or is directly attached to an RJ45
connector.
The PHY supports 10/100/1000 mbps link modes, CDT, auto-negotiation and
802.3az EEE.
For operation, the LDO controller found in the IPQ5018 SoC for which
there is provision in the mdio-4019 driver.
Two common archictures across IPQ5018 boards are:
1. IPQ5018 PHY --> MDI --> RJ45 connector
2. IPQ5018 PHY --> MDI --> External PHY
In a phy to phy architecture, the DAC needs to be configured to
accommodate for the short cable length. As such, add an optional boolean
property so the driver sets preset DAC register values accordingly.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250613-ipq5018-ge-phy-v5-1-9af06e34ea6b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250618011933.11423-1-chenyuan_fl@163.com
The correct tag for marking private fields in kerneldoc is "private:", not
capitalized "Private:". Fix the pwrctl struct to silence the following
warnings:
Warning: include/linux/pci-pwrctrl.h:45 struct member 'nb' not described in 'pci_pwrctrl'
Warning: include/linux/pci-pwrctrl.h:45 struct member 'link' not described in 'pci_pwrctrl'
Warning: include/linux/pci-pwrctrl.h:45 struct member 'work' not described in 'pci_pwrctrl'
Fixes: 4565d2652a ("PCI/pwrctl: Add PCI power control core code")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://lore.kernel.org/all/20250617233539.GA1177120@bhelgaas/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250618091129.44810-1-brgl@bgdev.pl
The last use of the work_on_cpu_safe() macro was removed recently by
commit 9cda46babd ("crypto: n2 - remove Niagara2 SPU driver")
Remove it, and the work_on_cpu_safe_key() function it calls.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
If we are propagating across the userns boundary, we need to lock the
mounts added there. However, in case when something has already
been mounted there and we end up sliding a new tree under that,
the stuff that had been there before should not get locked.
IOW, lock_mnt_tree() should be called before we reparent the
preexisting tree on top of what we are adding.
Fixes: 3bd045cc9c ("separate copying and locking mount tree on cross-userns copies")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
collect_mounts() has several problems - one can't iterate over the results
directly, so it has to be done with callback passed to iterate_mounts();
it has an oopsable race with d_invalidate(); it creates temporary clones
of mounts invisibly for sync umount (IOW, you can have non-lazy umount
succeed leaving filesystem not mounted anywhere and yet still busy).
A saner approach is to give caller an array of struct path that would pin
every mount in a subtree, without cloning any mounts.
* collect_mounts()/drop_collected_mounts()/iterate_mounts() is gone
* collect_paths(where, preallocated, size) gives either ERR_PTR(-E...) or
a pointer to array of struct path, one for each chunk of tree visible under
'where' (i.e. the first element is a copy of where, followed by (mount,root)
for everything mounted under it - the same set collect_mounts() would give).
Unlike collect_mounts(), the mounts are *not* cloned - we just get pinning
references to the roots of subtrees in the caller's namespace.
Array is terminated by {NULL, NULL} struct path. If it fits into
preallocated array (on-stack, normally), that's where it goes; otherwise
it's allocated by kmalloc_array(). Passing 0 as size means that 'preallocated'
is ignored (and expected to be NULL).
* drop_collected_paths(paths, preallocated) is given the array returned
by an earlier call of collect_paths() and the preallocated array passed to that
call. All mount/dentry references are dropped and array is kfree'd if it's not
equal to 'preallocated'.
* instead of iterate_mounts(), users should just iterate over array
of struct path - nothing exotic is needed for that. Existing users (all in
audit_tree.c) are converted.
[folded a fix for braino reported by Venkat Rao Bagalkote <venkat88@linux.ibm.com>]
Fixes: 80b5dce8c5 ("vfs: Add a function to lazily unmount all mounts from any dentry")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
FWSEC-FRTS is the first firmware we need to run on the GSP falcon in
order to initiate the GSP boot process. Introduce the structure that
describes it.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-16-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Booting the GSP on Ampere requires an intricate dance between the GSP
and SEC2 falcons, where the GSP starts by running the FWSEC firmware to
create the WPR2 region , and then SEC2 loads the actual RISC-V firmware
into the GSP.
Add the common Falcon code and HAL for Ampere GPUs, and instantiate the
GSP and SEC2 Falcons that will be required to perform that dance and
boot the GSP.
Thanks to Ben Skeggs for pointing out an important bug in the memory
scrubbing code that could lead to a race condition and ultimately a
failure to boot the GSP!
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-15-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reserve a page of system memory so sysmembar can perform a read on it if
a system write occurred since the last flush. Do this early as it can be
required to e.g. reset the GPU falcons.
Chipsets capabilities differ in that respect, so this commit also
introduces the FB HAL.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-14-ecf41ef99252@nvidia.com
[ * Use kernel::page::PAGE_SIZE instead of kernel::bindings::PAGE_SIZE.
* Get rid of the Option for SysmemFlush.
* Slightly reword SysmemFlush doc-comments.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
dma_map_XXX() can fail and should be tested for errors with
dma_mapping_error().
Fixes: b3a271a94d ("[SCSI] qla4xxx: support iscsiadm session mgmt")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250618071742.21822-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The reproducer uses a file0 on a ntfs3 file system with a corrupted i_link.
When renaming, the file0's inode is marked as a bad inode because the file
name cannot be deleted.
The underlying bug is that make_bad_inode() is called on a live inode.
In some cases it's "icache lookup finds a normal inode, d_splice_alias()
is called to attach it to dentry, while another thread decides to call
make_bad_inode() on it - that would evict it from icache, but we'd already
found it there earlier".
In some it's outright "we have an inode attached to dentry - that's how we
got it in the first place; let's call make_bad_inode() on it just for shits
and giggles".
Fixes: 78ab59fee0 ("fs/ntfs3: Rework file operations")
Reported-by: syzbot+1aa90f0eb1fc3e77d969@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1aa90f0eb1fc3e77d969
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
After applying this patch, could correctly create symlink:
ln -s "relative/path/to/file" symlink
Signed-off-by: Rong Zhang <ulin0208@gmail.com>
[almaz.alexandrovich@paragon-software.com: added cpu_to_le32 macro to
rs->Flags assignment]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The symlinks created in windows will be broken in linux by ntfs3,
the patch fixes it.
Signed-off-by: Rong Zhang <ulin0208@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is
often ~0. The error value should be tested with dma_mapping_error() like
it was done in qla26xx_dport_diagnostics().
Fixes: 818c7f87a1 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250617161115.39888-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add pm80xx_fatal_error_uevent_emit() which is called when the pm80xx
driver encouters a fatal error. The uevent has the following additional
custom key/value pair sets:
- DRIVER: driver name, pm80xx in this case
- HBA_NUM: the scsi host id of the device
- EVENT_TYPE: to indicate a fatal error
- REPORTED_BY: either driver or firmware
The uevent is anchored to the kernel object that represents the SCSI
controller, which includes other useful core variables, such as, ACTION,
DEVPATH, SUBSYSTEM, and more.
The fatal_error_uevent_emit() function is called when the controller
fatal error state changes. Since this doesn't happen often for a
specific SCSI host, there is no worries of a uevent storm.
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250616190018.2136260-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since we will need to allocate lots of distinct memory chunks to be
shared between GPU and CPU, introduce a type dedicated to that. It is a
light wrapper around CoherentAllocation.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-13-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Upon reset, the GPU executes the GFW (GPU Firmware) in order to
initialize its base parameters such as clocks. The driver must ensure
that this step is completed before using the hardware.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-12-ecf41ef99252@nvidia.com
[ Slightly adjust comments in wait_gfw_boot_completion(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Erase command is slow on discrete graphics storage
and may overshot PCI completion timeout.
BMG introduces the ability to have non-posted erase.
Add driver support for non-posted erase with polling
for erase completion.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Reuven Abliyev <reuven.abliyev@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250617145159.3803852-9-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Enable access to internal non-volatile memory on DGFX
with GSC/CSC devices via a child device.
The nvm child device is exposed via auxiliary bus.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250617145159.3803852-7-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Register the on-die nvm device with the mtd subsystem.
Refcount nvm object on _get and _put mtd callbacks.
For erase operation address and size should be 4K aligned.
For write operation address and size has to be 4bytes aligned.
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
CC: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Co-developed-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250617145159.3803852-5-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In intel-dg, there is no access to the spi controller,
the information is extracted from the descriptor region.
CC: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250617145159.3803852-3-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.10
This patch set contains bug fixes related to diagnostic log messaging,
driver initialization and removal, updates to mailbox command handling,
and string modifications for obsolete adapter model descriptions.
The patches were cut against Martin's 6.17/scsi-queue tree.
Link: https://lore.kernel.org/r/20250618192138.124116-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Obsolete adapters' model description strings are updated to indicate that
they are no longer supported. End-of-life adapters will still remain
probed by the lpfc driver based on PCI id.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-12-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The CQ_CREATE_SET mailbox command's bitfields are updated. Rename the
cqe_cnt and separate high/low bitfield names to help resolve confusion
between two similar bitfield definitions. Corresponding usages of the
newly defined bitfields are updated as well.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-11-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move clearing of HBA_SETUP flag out of lpfc_sli_brdrestart_s4 and before
lpfc_sli4_queue_unset. lpfc_sli4_queue_unset kfrees phba queues, so
clear the HBA_SETUP atomic flag to signal that the phba struct is no
longer initialized.
Also, add a check for the HBA_SETUP flag in the lpfc_sli4_io_xri_aborted
routine before dereferencing the ELS WQ.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For SLI3, the HBA_SETUP flag is never set so the lpfc_dev_loss_tmo_callbk
always early returns. Add a phba->sli_rev check for SLI4 mode so that
the SLI3 path can flow through the original dev_loss_tmo worker thread
design to lpfc_dev_loss_tmo_handler instead of early return.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Port wide initialization flags FLOGI_ISSUED and RHBA_CMPL make more sense
to be cleared upon a link down event rather than waiting for a link up
event. By moving clearing of these initializatin flags to a link down
handler, future confusion on the state of initialization is avoided.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are unnecessary checks on an HBA's interface type and family before
erroring out a failed lpfc_get_sli4_parameters mailbox command. Simplify
the error handling by logging a message and proceeding to memory free
labels.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an FDMI request completes with local reject status and the request is
not retryable, there's no need to parse an FDMI response payload. Insert
an early return statement for such cases.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During rmmod, all ndlp objects are cleaned up and marked with the
NLP_DROPPED flag indicating that an ndlp object is currently being
released. Thus, if an RSCN is received during driver unload, then
walking the fc_nodes list to process the RSCN is unnecessary because the
ndlp objects are very shortly going to be released.
In the lpfc_rscn_recovery_check routine, early return if the driver is in
the middle of unloading by checking for the FC_UNLOADING flag.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the
resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may
occur before sli4_hba.hdwqs are allocated. This may result in a null
pointer dereference when attempting to take the abts_io_buf_list_lock for
the first hardware queue. Fix by adding a null ptr check on
phba->sli4_hba.hdwq and early return because this situation means there
must have been an error during port initialization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Initialization parameters for trace rings used in debugfs are sometimes
automatically adjusted. This patch corrects and updates the
corresponding log messages.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
