Using `unwrap()` in kernel doctests can cause panics on error and may
give newcomers the mistaken impression that panicking is acceptable
in kernel code.
Replace all `.unwrap()` calls in `kernel::list`
examples with `.ok_or(EINVAL)?` so that errors are properly propagated.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1164
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250527204928.5117-1-albinbabuvarghese20@gmail.com
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This reverts commit ad5643cf2f ("riscv: Define TASK_SIZE_MAX for
__access_ok()").
This commit changes TASK_SIZE_MAX to be LONG_MAX to optimize access_ok(),
because the previous TASK_SIZE_MAX (default to TASK_SIZE) requires some
computation.
The reasoning was that all user addresses are less than LONG_MAX, and all
kernel addresses are greater than LONG_MAX. Therefore access_ok() can
filter kernel addresses.
Addresses between TASK_SIZE and LONG_MAX are not valid user addresses, but
access_ok() let them pass. That was thought to be okay, because they are
not valid addresses at hardware level.
Unfortunately, one case is missed: get_user_pages_fast() happily accepts
addresses between TASK_SIZE and LONG_MAX. futex(), for instance, uses
get_user_pages_fast(). This causes the problem reported by Robert [1].
Therefore, revert this commit. TASK_SIZE_MAX is changed to the default:
TASK_SIZE.
This unfortunately reduces performance, because TASK_SIZE is more expensive
to compute compared to LONG_MAX. But correctness first, we can think about
optimization later, if required.
Reported-by: <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/linux-riscv/77605.1750245028@localhost/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: ad5643cf2f ("riscv: Define TASK_SIZE_MAX for __access_ok()")
Link: https://lore.kernel.org/r/20250619155858.1249789-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Remove `use core::ffi::c_void`, which shadows `kernel::ffi::c_void`
brought in via `use crate::prelude::*`, to maintain consistency and
centralize the abstraction.
Since `kernel::ffi::c_void` is a straightforward re-export of
`core::ffi::c_void`, both are functionally equivalent. However, using
`kernel::ffi::c_void` improves consistency across the kernel's Rust code
and provides a unified reference point in case the definition ever needs
to change, even if such a change is unlikely.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/288089/topic/x/near/520452733
Signed-off-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://lore.kernel.org/r/20250528174953.2948570-1-y.j3ms.n@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This reverts commit 61a74ad254 ("riscv: misaligned: fix sleeping function
called during misaligned access handling"). The commit addresses a sleeping
in atomic context problem, but it is not the correct fix as explained by
Clément:
"Using nofault would lead to failure to read from user memory that is paged
out for instance. This is not really acceptable, we should handle user
misaligned access even at an address that would generate a page fault."
This bug has been properly fixed by commit 453805f0a2 ("riscv:
misaligned: enable IRQs while handling misaligned accesses").
Revert this improper fix.
Link: https://lore.kernel.org/linux-riscv/b779beed-e44e-4a5e-9551-4647682b0d21@rivosinc.com/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: 61a74ad254 ("riscv: misaligned: fix sleeping function called during misaligned access handling")
Link: https://lore.kernel.org/r/20250620110939.1642735-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Merge series from Conor Dooley <conor@kernel.org>:
This is a v2 of a patchset I sent about this time last year, adding the
regular transfer_one_message op to the microchip-core-qspi driver. In that
v1 Mark expressed his dislike for that op, so v2 is using
prepare/unprepare/transfer_one instead. The unprepare implementation still
contains the 750 us delay that the driver had back in v1. I've heard a
suggestion internally as to why this is needed, but it was unsubstantiated,
so I still have no justification for it. I held off on sending a v2 because
of a lack of explanation for the delay, but I don't wanna hold off forever
for something I might never understand.
cmos_interrupt() can be called in a non-interrupt context, such as in
an ACPI event handler (which runs in an interrupt thread). Therefore,
usage of spin_lock(&rtc_lock) is insecure. Use spin_lock_irqsave() /
spin_unlock_irqrestore() instead.
Before a misguided
commit 6950d046eb ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ")
the cmos_interrupt() function used spin_lock_irqsave(). That commit
changed it to spin_lock() and broke locking, which was partially fixed in
commit 13be2efc39 ("rtc: cmos: Disable irq around direct invocation of cmos_interrupt()")
That second commit did not take account of the ACPI fixed event handler
pathway, however. It introduced local_irq_disable() workarounds in
cmos_check_wkalrm(), which can cause problems on PREEMPT_RT kernels
and are now unnecessary.
Add an explicit comment so that this change will not be reverted by
mistake.
Cc: stable@vger.kernel.org
Fixes: 6950d046eb ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://lore.kernel.org/all/aDtJ92foPUYmGheF@debian.local/
Link: https://lore.kernel.org/r/20250607210608.14835-1-mat.jonczyk@o2.pl
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The bridge used in drm_connector_hdmi_audio_init() does not correctly
point to the required audio bridge, which lead to incorrect audio
configuration input.
Fixes: 231adeda9f ("drm/bridge-connector: hook DisplayPort audio support")
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250620011616.118-1-kernel@airkyi.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The decompress_io_ctx may be released asynchronously after
I/O completion. If this file is deleted immediately after read,
and the kworker of processing post_read_wq has not been executed yet
due to high workloads, It is possible that the inode(f2fs_inode_info)
is evicted and freed before it is used f2fs_free_dic.
The UAF case as below:
Thread A Thread B
- f2fs_decompress_end_io
- f2fs_put_dic
- queue_work
add free_dic work to post_read_wq
- do_unlink
- iput
- evict
- call_rcu
This file is deleted after read.
Thread C kworker to process post_read_wq
- rcu_do_batch
- f2fs_free_inode
- kmem_cache_free
inode is freed by rcu
- process_scheduled_works
- f2fs_late_free_dic
- f2fs_free_dic
- f2fs_release_decomp_mem
read (dic->inode)->i_compress_algorithm
This patch store compress_algorithm and sbi in dic to avoid inode UAF.
In addition, the previous solution is deprecated in [1] may cause system hang.
[1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org
Cc: Daeho Jeong <daehojeong@google.com>
Fixes: bff139b49d ("f2fs: handle decompress only post processing in softirq")
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Baocong Liu <baocong.liu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
No logic changes, just cleanup and prepare for fixing the UAF issue
in f2fs_free_dic.
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Baocong Liu <baocong.liu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces /sys/fs/f2fs/<dev>/reserved_pin_section for tuning
@needed parameter of has_not_enough_free_secs(), if we configure it w/
zero, it can avoid f2fs_gc() as much as possible while fallocating on
pinned file.
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: wangzijie <wangzijie1@honor.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
=============================
[ BUG: Invalid wait context ]
6.13.0-rc1 #84 Tainted: G O
-----------------------------
cat/56160 is trying to lock:
ffff888105c86648 (&cprc->stat_lock){+.+.}-{3:3}, at: update_general_status+0x32a/0x8c0 [f2fs]
other info that might help us debug this:
context-{5:5}
2 locks held by cat/56160:
#0: ffff88810a002a98 (&p->lock){+.+.}-{4:4}, at: seq_read_iter+0x56/0x4c0
#1: ffffffffa0462638 (f2fs_stat_lock){....}-{2:2}, at: stat_show+0x29/0x1020 [f2fs]
stack backtrace:
CPU: 0 UID: 0 PID: 56160 Comm: cat Tainted: G O 6.13.0-rc1 #84
Tainted: [O]=OOT_MODULE
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Call Trace:
<TASK>
dump_stack_lvl+0x88/0xd0
dump_stack+0x14/0x20
__lock_acquire+0x8d4/0xbb0
lock_acquire+0xd6/0x300
_raw_spin_lock+0x38/0x50
update_general_status+0x32a/0x8c0 [f2fs]
stat_show+0x50/0x1020 [f2fs]
seq_read_iter+0x116/0x4c0
seq_read+0xfa/0x130
full_proxy_read+0x66/0x90
vfs_read+0xc4/0x350
ksys_read+0x74/0xf0
__x64_sys_read+0x1d/0x20
x64_sys_call+0x17d9/0x1b80
do_syscall_64+0x68/0x130
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x7f2ca53147e2
- seq_read
- stat_show
- raw_spin_lock_irqsave(&f2fs_stat_lock, flags)
: f2fs_stat_lock is raw_spinlock_t type variable
- update_general_status
- spin_lock(&sbi->cprc_info.stat_lock);
: stat_lock is spinlock_t type variable
The root cause is the lock order is incorrect [1], we should not acquire
spinlock_t lock after raw_spinlock_t lock, as if CONFIG_PREEMPT_LOCK is
on, spinlock_t is implemented based on rtmutex, which can sleep after
holding the lock.
To fix this issue, let's use change f2fs_stat_lock lock type from
raw_spinlock_t to spinlock_t, it's safe due to:
- we don't need to use raw version of spinlock as the path is not
performance sensitive.
- we don't need to use irqsave version of spinlock as it won't be
used in irq context.
Quoted from [1]:
"Extend lockdep to validate lock wait-type context.
The current wait-types are:
LD_WAIT_FREE, /* wait free, rcu etc.. */
LD_WAIT_SPIN, /* spin loops, raw_spinlock_t etc.. */
LD_WAIT_CONFIG, /* CONFIG_PREEMPT_LOCK, spinlock_t etc.. */
LD_WAIT_SLEEP, /* sleeping locks, mutex_t etc.. */
Where lockdep validates that the current lock (the one being acquired)
fits in the current wait-context (as generated by the held stack).
This ensures that there is no attempt to acquire mutexes while holding
spinlocks, to acquire spinlocks while holding raw_spinlocks and so on. In
other words, its a more fancy might_sleep()."
[1] https://lore.kernel.org/all/20200321113242.427089655@linutronix.de
Fixes: 98237fcda4 ("f2fs: use spin_lock to avoid hang")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS-fs (dm-55): access invalid blkaddr:972878540
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x88
dump_stack+0x18/0x24
__f2fs_is_valid_blkaddr+0x360/0x3b4
f2fs_is_valid_blkaddr+0x10/0x20
f2fs_get_node_info+0x21c/0x60c
__write_node_page+0x15c/0x734
f2fs_sync_node_pages+0x4f8/0x700
f2fs_write_checkpoint+0x4a8/0x99c
__checkpoint_and_complete_reqs+0x7c/0x20c
issue_checkpoint_thread+0x4c/0xd8
kthread+0x11c/0x1b0
ret_from_fork+0x10/0x20
If f2fs_allocate_data_block() fails, we may update nat.blkaddr w/
uninitialized fio.new_blkaddr.
- __write_node_folio
- f2fs_do_write_node_page
- do_write_page
- f2fs_allocate_data_block
: once it fails, it may not allocate new blkaddr
- set_node_addr
: update w/ uninitialized fio.new_blkaddr variable
I've checked all error paths in f2fs_allocate_data_block(), it should
be tagged w/ CP_ERROR_FLAG.
In addition, f2fs_allocate_data_block() succeeds, fio.new_blkaddr should
be valid.
Let's add f2fs_bug_on() to check above two conditions to detect any
potential bugs.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS-fs (dm-55): access invalid blkaddr:972878540
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x88
dump_stack+0x18/0x24
__f2fs_is_valid_blkaddr+0x360/0x3b4
f2fs_is_valid_blkaddr+0x10/0x20
f2fs_get_node_info+0x21c/0x60c
__write_node_page+0x15c/0x734
f2fs_sync_node_pages+0x4f8/0x700
f2fs_write_checkpoint+0x4a8/0x99c
__checkpoint_and_complete_reqs+0x7c/0x20c
issue_checkpoint_thread+0x4c/0xd8
kthread+0x11c/0x1b0
ret_from_fork+0x10/0x20
If nat.blkaddr is corrupted, during checkpoint, f2fs_sync_node_pages()
will loop to flush node page w/ corrupted nat.blkaddr.
Although, it tags SBI_NEED_FSCK, checkpoint can not persist it due
to deadloop.
Let's call f2fs_handle_error(, ERROR_INCONSISTENT_NAT) to record such
error into superblock, it expects fsck can detect the error and repair
inconsistent nat.blkaddr after device reboot.
Note that, let's add sanity check in f2fs_get_node_info() to detect
in-memory nat.blkaddr inconsistency, but only if CONFIG_F2FS_CHECK_FS
is enabled.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
one_time mode is only for background GC. So, we need to set it back to
false when foreground GC is enforced.
Fixes: 9748c2ddea ("f2fs: do FG_GC when GC boosting is required for zoned devices")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We already use FG_GC when we have free sections under
gc_boost_zoned_gc_percent. So, let's make it consistent.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- dm-raid: replace "rdev" with correct loop variable name "r"
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCaFl3iRQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbcRMAP92ueTp0NFJr9dJne79HbhpJkBAS+b+
25/qycKPv2XDfwD/c3/e3sBOhTIK8PohFR7lR62NepdfrOFVaaKubmNUlAU=
=FD8P
-----END PGP SIGNATURE-----
Merge tag 'for-6.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-crypt: fix a crash on 32-bit machines
- dm-raid: replace "rdev" with correct loop variable name "r"
* tag 'for-6.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-raid: fix variable in journal device check
dm-crypt: Extend state buffer size in crypt_iv_lmk_one
Instead of the open-coded read/modify/write sequence, we can simply use
the regmap helpers regmap_set_bits() and regmap_update_bits()
respectively.
This makes the code easier to read, and avoids extra work in case the
underlying bus supports updating bits via
struct regmap_bus::reg_update_bits() directly (which is the case for
S2MPG10 on gs101 where this driver communicates via ACPM).
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-31-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The regmap_clear_bits() and regmap_set_bits() helper macros state the
intention a bit more obviously.
Use those.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-30-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
To release memory allocated by device_init_wakeup(true), drivers have
to call device_init_wakeup(false) in error paths and unbind.
Switch to the new devres managed version devm_device_init_wakeup() to
plug this memleak.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-29-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix this minor typo, and adjust the a related incorrect alignment to
avoid a checkpatch error.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-28-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for Samsung's S2MPG10 PMIC RTC, which is similar to the
existing PMIC RTCs supported by this driver.
S2MPG10 doesn't use I2C, so we expect the core driver to have created a
regmap for us.
Additionally, it can be used for doing a cold-reset. If requested to do
so (via DT), S2MPG10 is programmed with a watchdog configuration that
will perform a full power cycle upon watchdog expiry.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-27-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Samsung S2MPG10 PMIC is not connected via I2C as this driver
assumes, hence this driver's current approach of creating an I2C-based
regmap doesn't work for it, and this driver should use the regmap
provided by the parent (core) driver instead for that PMIC.
To prepare this driver for s2mpg support, restructure the code to only
create a regmap if one isn't provided by the parent.
No functional changes, since the parent doesn't provide a regmap for
any of the PMICs currently supported by this driver. Having this change
separate will simply make the addition of S2MPG10 support more
self-contained, without additional restructuring.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-26-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
platform_get_device_id() is called mulitple times during probe to
retrieve the device type. This makes the code harder to read than
necessary.
Just get the type once, which also trims the lengths of the lines
involved.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-25-d66d5f39b6bf@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
There are two bug fixes: 1) double-unlock introduced by the recent folio
conversion, 2) stale page content beyond eof complained by xfstests/generic/363.
-----BEGIN PGP SIGNATURE-----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=suF5
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
- fix double-unlock introduced by the recent folio conversion
- fix stale page content beyond EOF complained by xfstests/generic/363
* tag 'f2fs-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix to zero post-eof page
f2fs: Fix __write_node_folio() conversion
On GCC 15 the following warnings is emitted:
nolibc-test.c: In function ‘run_stdlib’:
nolibc-test.c:1416:32: warning: initializer-string for array of ‘char’ truncates NUL terminator but destination lacks ‘nonstring’ attribute (11 chars into 10 available) [-Wunterminated-string-initialization]
1416 | char buf[10] = "test123456";
| ^~~~~~~~~~~~
Increase the size of buf to avoid the warning.
It would also be possible to use __attribute__((nonstring)) but that
would require some ifdeffery to work with older compilers.
Fixes: 1063649cf5 ("selftests/nolibc: Add tests for strlcat() and strlcpy()")
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250623-nolibc-nonstring-v1-1-11282204766a@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Hook up nolibc-test with the kselftests framework.
This enables CI systems and developers to easily execute the tests.
While nolibc-test does not emit KTAP output itself that is not a problem,
as the kselftest executor will wrap the output in KTAP.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250620-nolibc-selftests-v1-4-f6b2ce7c5071@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The nolibc tests are not real kselftests, they work differently and
provide a different interface. Users trying to use them like real
selftests may be confused and the tests are not executed by CI systems.
To make space for an integration with the kselftest framework, move the
custom tests out of the way.
The custom tests are still useful to keep as they provide functionality
not provided by kselftests.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250620-nolibc-selftests-v1-3-f6b2ce7c5071@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The driver for CoreQSPI only supports memory operations at present, so
add support for regular transfers so that the SD card slot and ADC on
the BeagleV Fire can be used.
Signed-off-by: Cyril Jean <cyril.jean@microchip.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250620-splice-shelter-310771564886@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
The controller's minimum possible bus clock is 1/30 the rate of the
input clock. Naively set the minimum bus clock speed the controller
is capable of during probe, assuming that the rate will never reduce
further.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250620-drained-widen-ac311bd5f172@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4deeea4b07 ("MAINTAINERS: add myself as smbx charger driver
maintainer") adds the section QUALCOMM SMB CHARGER DRIVER in MAINTAINERS,
including a file entry pointing to qcom_smbx_charger.c. Within the same
patch series, the commit 5ec53bcc7f ("power: supply: pmi8998_charger:
rename to qcom_smbx") renames qcom_pmi8998_charger.c to qcom_smbx.c and not
to qcom_smbx_charger.c, though. Note that the commit message clearly
indicates the intentional removal of the "_charger" suffix.
Refer to the intended file.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250623081240.149446-1-lukas.bulwahn@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This reverts commit 631b2af2f3 ("PCI/ACPI: Fix allocated memory release
on error in pci_acpi_scan_root()").
The reverted patch causes the 'ri->cfg' and 'root_ops' resources to be
released multiple times.
When acpi_pci_root_create() fails, these resources have already been
released internally by the __acpi_pci_root_release_info() function.
Releasing them again in pci_acpi_scan_root() leads to incorrect behavior
and potential memory issues.
We plan to resolve the issue using a more appropriate fix.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aEmdnuw715btq7Q5@stanley.mountain/
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250619072608.2075475-1-qiaozhe@iscas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit f1fce08e63 ("netpoll: Eliminate redundant assignment") removed
the initialization of the UDP checksum, which was wrong and broke
netpoll IPv6 transmission due to bad checksumming.
udph->check needs to be set before calling csum_ipv6_magic().
Fixes: f1fce08e63 ("netpoll: Eliminate redundant assignment")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250620-netpoll_fix-v1-1-f9f0b82bc059@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few new dependencies are required to remove some of the TODO items:
- A way to safely convert from byte slices to types implementing
`FromBytes`,
- A way to obtain slices and write into a `CoherentAllocation`,
- Several improvements to the `register!()` macro,
- Alignment operations to powers of two, and an equivalent to the C
`fls`,
- Support for `xa_alloc` in the XAlloc bindings.
Some items have also become obsolete:
- The auxiliary bus abstractions have been implemented and are in use,
- The ELF utilities are not considered for being part of the core kernel
bindings anymore.
- VBIOS, falcon and GPU timer have been completed.
We now have quite a few TODO entries in the code, so annotate them with
a 4 letter code representing the corresponding task in `todo.rst`. This
allows to easily find which part of the code corresponds to a given
entry (and conversely).
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-24-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
With all the required pieces in place, load FWSEC-FRTS onto the GSP
falcon, run it, and check that it successfully carved out the WPR2
region out of framebuffer memory.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-23-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The FWSEC firmware needs to be extracted from the VBIOS and patched with
the desired command, as well as the right signature. Do this so we are
ready to load and run this firmware into the GSP falcon and create the
FRTS region.
[joelagnelf@nvidia.com: give better names to FalconAppifHdrV1's fields]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-22-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Some of the firmwares need to be patched at load-time with a signature.
Add a couple of types and traits that sub-modules can use to implement
this behavior, while ensuring that the correct kind of signature is
applied to the firmware.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-21-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
FWSEC-FRTS is run with the desired address of the FRTS region as
parameter, which we need to compute depending on some hardware
parameters.
Do this in a `FbLayout` structure, that will be later extended to
describe more memory regions used to boot the GSP.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-20-ecf41ef99252@nvidia.com
[ In doc-comment of FbLayout s/bootup process/boot process/ - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
pylint doesn't understand our path hacks, and it generates a lot
of warnings for driver tests. Import what we use one by one, this
is hopefully not too tedious and it makes pylint happy.
Link: https://patch.msgid.link/20250621171944.2619249-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using the support for navigating the VBIOS, add support to extract vBIOS
ucode data required for GSP to boot. The main data extracted from the
vBIOS is the FWSEC-FRTS firmware which runs on the GSP processor. This
firmware runs in high secure mode, and sets up the WPR2 (Write protected
region) before the Booter runs on the SEC2 processor.
Tested on my Ampere GA102 and boot is successful.
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Shirish Baskaran <sbaskaran@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Timur Tabi <ttabi@nvidia.com>
Cc: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
[ acourbot@nvidia.com: remove now-unneeded Devres acquisition ]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-19-ecf41ef99252@nvidia.com
[ Re-format and use markdown in comments. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
lpc18xx uses plat_dat->mac_interface, despite wanting to validate the
PHY interface. Checking the DT files (arch/arm/boot/dts/nxp/lpc/), none
of them specify mac-mode which means mac_interface and phy_interface
will be identical.
mac_interface is only used when there is some kind of MII converter
between the DesignWare MAC and PHY, and describes the interface mode
that the DW MAC needs to use, whereas phy_interface describes the
interface mode that the PHY uses.
Noting that lpc18xx only supports MII and RMII interface modes, switch
this glue driver to use plat_dat->phy_interface, and to mark that the
mac_interface is not used, explicitly set it to PHY_INTERFACE_MODE_NA.
The latter is safe as the only user of mac_interface for this platform
would be in stmmac_check_pcs_mode(), which only checks for RGMII or
SGMII.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Link: https://patch.msgid.link/E1uSBri-004fL5-FI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With display code using the struct drm_device based pcode interface, we
can drop the old pcode compat interface.
We can also drop the __compat_uncore_to_tile() helper from
intel_uncore.h compat header.
Turns out a couple of headers depended on the intel_uncore.h include via
intel_pcode.h. Fix them.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/948016a031dcb2acef0c97071aac09fa49613e07.1750678991.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
With the struct drm_device based pcode interface in place in both i915
and xe, we can switch display code to use that, and ditch a number of
struct drm_i915_private uses. Also drop the dependency on i915_drv.h
from a couple of files.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/f948fad1b8208522e15140692c17cf493ef305d9.1750678991.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In preparation for dropping the dependency on struct intel_uncore or
struct xe_tile from display code, add a struct drm_device based
interface to pcode.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/eeaa9cc8438caab2e22f9cb2142fbc18cc0fd861.1750678991.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
