... and store it in ->s_d_flags, to be used by __d_alloc()
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
DCACHE_OP_PRUNE in ->d_flags at the time of d_set_d_op() should've
been treated the same as any other DCACHE_OP_... - we forgot to adjust
that WARN_ON() when DCACHE_OP_PRUNE had been introduced...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
igc already supports enabling MAC Merge for FPE. This patch adds
support for preemptible queues in mqprio.
Tested preemption with mqprio by:
1. Enable FPE:
ethtool --set-mm enp1s0 pmac-enabled on tx-enabled on verify-enabled on
2. Enable preemptible queue in mqprio:
mqprio num_tc 4 map 0 1 2 3 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Changes:
1. Introduce tx_enabled flag to control preemptible queue. tx_enabled
is set via mmsv module based on multiple factors, including link
up/down status, to determine if FPE is active or inactive.
2. Add priority field to TXDCTL for express queue to improve data
fetch performance.
3. Block preemptible queue setup in taprio unless reverse-tsn-txq-prio
private flag is set. Encourages adoption of standard queue priority
scheme for new features.
4. Hardware-padded frames from preemptible queues result in incorrect
mCRC values, as padding bytes are excluded from the computation. Pad
frames to at least 60 bytes using skb_padto() before transmission to
ensure the hardware includes padding in the mCRC calculation.
Tested preemption with taprio by:
1. Enable FPE:
ethtool --set-mm enp1s0 pmac-enabled on tx-enabled on verify-enabled on
2. Enable private flag to reverse TX queue priority:
ethtool --set-priv-flags enp1s0 reverse-txq-prio on
3. Enable preemptible queue in taprio:
taprio num_tc 4 map 0 1 2 3 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
By default, igc assigns TX hw queue 0 the highest priority and queue 3
the lowest. This is opposite of most NICs, where TX hw queue 3 has the
highest priority and queue 0 the lowest.
mqprio in igc already uses TX arbitration unconditionally to reverse TX
queue priority when mqprio is enabled. The TX arbitration logic does not
require a private flag, because mqprio was added recently and no known
users depend on the default queue ordering, which differs from the typical
convention.
taprio does not use TX arbitration, so it inherits the default igc TX
queue priority order. This causes tc command inconsistencies when
configuring frame preemption with taprio compared to mqprio in igc.
Other tc command inconsistencies and configuration issues already exist
when using taprio on igc compared to other network controllers. These
issues are described in a later section.
To harmonize TX queue priority behavior between taprio and mqprio, and
to fix these issues without breaking long-standing taprio use cases,
this patch adds a new private flag, called reverse-tsn-txq-prio, to
reverse the TX queue priority. It makes queue 3 the highest and queue 0
the lowest, reusing the TX arbitration logic already used by mqprio.
Users must set the private flag when enabling frame preemption with
taprio to follow the standard convention. Doing so promotes adoption of
the correct priority model for new features while preserving
compatibility with legacy configurations.
This new private flag addresses:
1. Non-standard socket -> tc -> TX hw queue mapping for taprio in igc
Without the private flag:
- taprio maps (socket -> tc -> TX hardware queue) differently on igc
compared to other network controllers
- On igc, mqprio maps tc differently from taprio, since mqprio already
uses TX arbitration
The following examples compare taprio configuration on igc and other
network controllers:
a) On other NICs (TX hw queue 3 is highest priority):
taprio num_tc 4 map 0 1 2 3 .... \
queues 1@0 1@1 1@2 1@3
Mapping translates to:
socket 0 -> tc 0 -> queue 0
socket 3 -> tc 3 -> queue 3
This is the normal mapping that respects the standard convention:
higher socket number -> higher tc -> higher priority TX hw queue
b) On igc (TX hw queue 0 is highest priority by default):
taprio num_tc 4 map 3 2 1 0 .... \
queues 1@0 1@1 1@2 1@3
Mapping translates to:
socket 0 -> tc 3 -> queue 3
socket 3 -> tc 0 -> queue 0
This igc tc mapping example is based on Intel's TSN validation test
case, where a higher socket priority maps to a higher priority queue.
It respects the mapping:
higher socket number -> higher priority TX hw queue
but breaks the expected ordering:
higher tc -> higher priority TX hw queue
as defined in [Ref1]. This custom mapping complicates common taprio
setup across NICs.
2. Non-standard frame preemption mapping for taprio in igc
Without the private flag:
- Compared to other network controllers, taprio on igc must flip the
expected fp sequence, since express traffic is expected to map to the
highest priority queue and preemptible traffic to lower ones
- On igc, frame preemption configuration for mqprio differs from taprio,
since mqprio already uses TX arbitration
The following examples compare taprio frame preemption configuration on
igc and other network controllers:
a) On other NICs (TX hw queue 3 is highest priority):
taprio num_tc 4 map ..... \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Mapping translates to:
tc0, tc1, tc2 -> preemptible -> queue 0, 1, 2
tc3 -> express -> queue 3
This is the normal mapping that respects the standard convention:
higher tc -> express traffic -> higher priority TX hw queue
lower tc -> preemptible traffic -> lower priority TX hw queue
b) On igc (TX hw queue 0 is highest priority by default):
taprio num_tc 4 map ...... \
queues 1@0 1@1 1@2 1@3 \
fp E P P P
Mapping translates to:
tc0 -> express -> queue 0
tc1, tc2, tc3 -> preemptible -> queue 1, 2, 3
This inversion respects the mapping of:
express traffic -> higher priority TX hw queue
but breaks the expected ordering:
higher tc -> express traffic
as defined in [Ref1] where higher tc indicates higher priority. In
this case, the lower tc0 is assigned to express traffic. This custom
mapping further complicates common preemption setup across NICs.
Tests were performed on taprio with the following combinations, where
two apps send traffic simultaneously on different queues:
Private Flag Traffic Sent By Traffic Sent By
----------------------------------------------------------------
enabled iperf3 (queue 3) iperf3 (queue 0)
disabled iperf3 (queue 0) iperf3 (queue 3)
enabled iperf3 (queue 3) real-time app (queue 0)
disabled iperf3 (queue 0) real-time app (queue 3)
enabled real-time app (queue 3) iperf3 (queue 0)
disabled real-time app (queue 0) iperf3 (queue 3)
enabled real-time app (queue 3) real-time app (queue 0)
disabled real-time app (queue 0) real-time app (queue 3)
Private flag is controlled with:
ethtool --set-priv-flags enp1s0 reverse-tsn-txq-prio <on|off>
[Ref1]
IEEE 802.1Q clause 8.6.8 Transmission selection:
"For a given Port and traffic class, frames are selected from the
corresponding queue for transmission if and only if:
...
b) For each queue corresponding to a numerically higher value of traffic
class supported by the Port, the operation of the transmission selection
algorithm supported by that queue determines that there is no frame
available for transmission."
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previously, TX arbitration prioritized queues based on the TC they were
mapped to. A queue mapped to TC 3 had higher priority than one mapped to
TC 0.
To improve code reuse for upcoming patches and align with typical NIC
behavior, this patch updates the logic to prioritize higher queue numbers
when mqprio is used. As a result, queue 0 becomes the lowest priority and
queue 3 becomes the highest.
This patch also introduces igc_tsn_is_tc_to_queue_priority_ordered() to
preserve the original TC-based priority rule and reject configurations
where a higher TC maps to a lower queue offset.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ti,divider-clock uses properties from ti,autoidle.
As we are converting autoidle binding to ti,autoidle.yaml, fix the reference
here.
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
Link: https://lore.kernel.org/r/20250516081612.767559-4-sbellary@baylibre.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This uses the ti,autoidle.yaml for clock autoidle support. Clean up the example
to meet the current standards.
Add the creator of the original binding as a maintainer.
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
Link: https://lore.kernel.org/r/20250516081612.767559-3-sbellary@baylibre.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Autoidle clock is not an individual clock; it is always a derivate of some
basic clock like a gate, divider, or fixed-factor. This binding will be
referred in ti,divider-clock.yaml, and ti,fixed-factor-clock.yaml.
As all clocks don't support the autoidle feature e.g.,
in DRA77xx/AM57xx[1], dpll_abe_x2* and dpll_per_x2 don't have
autoidle, remove required properties from the binding.
Add the creator of the original binding as a maintainer.
[1] https://www.ti.com/lit/ug/spruhz6l/spruhz6l.pdf
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
Link: https://lore.kernel.org/r/20250516081612.767559-2-sbellary@baylibre.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Refactor TXDCTL macro handling to use FIELD_PREP and GENMASK macros.
This prepares the code for adding a new TXDCTL priority field in an
upcoming patch.
Verified that the macro values remain unchanged before and after
refactoring.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Rename macros to use the DCTL prefix for consistency with existing
macros that reference the same register. This prepares for an upcoming
patch that adds new fields to TXDCTL.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move and consolidate TXDCTL and RXDCTL macros in preparation for
upcoming TXDCTL changes. This improves organization and readability.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If reset_control_acquire() fails, then we can't return directly.
We need to do a little clean up first.
Fixes: cf2c3eceb7 ("spi: stm32-ospi: Make usage of reset_control_acquire/release() API")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aEmAGTUzzKZlLe3K@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable the drivers for camera clock controllers on Qualcomm SM8550 and
SM8650 SoC (enabled in all DTS files like SM8550-HDK or SM8650-HDK) and
video clock controllers on Qualcomm SM8450 SoC (enabled in SM8450-HDK
DTS).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250605173608.217495-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Replace the raw values with macros. No changes to the output
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250606-msm8960-irq-macros-v1-1-03e573ba26d6@proton.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Once the global hash is requested there is no way back to switch back to
the per-task private hash. This is checked at the begin of the function.
It is possible that two threads simultaneously request the global hash
and both pass the initial check and block later on the
mm::futex_hash_lock. In this case the first thread performs the switch
to the global hash. The second thread will also attempt to switch to the
global hash and while doing so, accessing the nonexisting slot 1 of the
struct futex_private_hash.
The same applies if the hash is made immutable: There is no reference
counting and the hash must not be replaced.
Verify under mm_struct::futex_phash that neither the global hash nor an
immutable hash in use.
Tested-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/aDwDw9Aygqo6oAx+@ly-workstation/
Fixes: bd54df5ea7 ("futex: Allow to resize the private local hash")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250610104400.1077266-5-bigeasy@linutronix.de/
The selftest can reproduce an issue where using bpf_msg_pop_data() in
ktls causes errors on the receiving end.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20250609020910.397930-3-jiayuan.chen@linux.dev
When sending plaintext data, we initially calculated the corresponding
ciphertext length. However, if we later reduced the plaintext data length
via socket policy, we failed to recalculate the ciphertext length.
This results in transmitting buffers containing uninitialized data during
ciphertext transmission.
This causes uninitialized bytes to be appended after a complete
"Application Data" packet, leading to errors on the receiving end when
parsing TLS record.
Fixes: d3b18ad31f ("tls: add bpf support to sk_msg handling")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20250609020910.397930-2-jiayuan.chen@linux.dev
Previously, the block layer stored the requests in the plug list in
LIFO order. For this reason, blk_attempt_plug_merge() would check
just the head entry for a back merge attempt, and abort after that
unless requests for multiple queues existed in the plug list. If more
than one request is present in the plug list, this makes the one-shot
back merging less useful than before, as it'll always fail to find a
quick merge candidate.
Use the tail entry for the one-shot merge attempt, which is the last
added request in the list. If that fails, abort immediately unless
there are multiple queues available. If multiple queues are available,
then scan the list. Ideally the latter scan would be a backwards scan
of the list, but as it currently stands, the plug list is singly linked
and hence this isn't easily feasible.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/20250611121626.7252-1-abuehaze@amazon.com/
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Fixes: e70c301fae ("block: don't reorder requests in blk_add_rq_to_plug")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The implementation of Default is restricted to only work with kmalloc
vectors for no good reason. This means I have to use
mem::replace(&mut my_vec, KVVec::new())
in Rust Binder instead of `mem::take(&mut my_vec)`. Thus, expand the
impl of Default to work with any allocator including kvmalloc.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250610-vec-default-v1-1-7bb2c97d75a0@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add set of workarounds for xe2_hpg.
-v2: Fix xe2_hpg GMD version for some workarounds.
-v3: Removed extra Workaround (Matt Roper)
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250605190804.1287289-3-dnyaneshwar.bhadane@intel.com
When Linux is running as the root partition under Microsoft Hypervisor
(MSHV) a.k.a Hyper-V, smc is used as the conduit for smc calls.
Extend arm_smccc_hypervisor_has_uuid() to support this usecase. Use
arm_smccc_1_1_invoke to retrieve and use the appropriate conduit instead
of supporting only hvc.
Boot tested on MSHV guest, MSHV root & KVM guest.
Signed-off-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Message-Id: <20250521094049.960056-1-anirudh@anirudhrb.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Bios queued up in the zone write plug have already gone through all all
preparation in the submit_bio path, including the freeze protection.
Submitting them through submit_bio_noacct_nocheck duplicates the work
and can can cause deadlocks when freezing a queue with pending bio
write plugs.
Go straight to ->submit_bio or blk_mq_submit_bio to bypass the
superfluous extra freeze protection and checks.
Fixes: 9b1ce7f0c6 ("block: Implement zone append emulation")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250611044416.2351850-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When blk_zone_write_plug_bio_endio() is called for a regular write BIO
used to emulate a zone append operation, that is, a BIO flagged with
BIO_EMULATES_ZONE_APPEND, the BIO operation code is restored to the
original REQ_OP_ZONE_APPEND but the BIO_EMULATES_ZONE_APPEND flag is not
cleared. Clear it to fully return the BIO to its orginal definition.
Fixes: 9b1ce7f0c6 ("block: Implement zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250611005915.89843-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
According to the description of the Loongson-7A2000 ACPI GPIO register in
the manual, its access mode should be BIT_CTRL_MODE, otherwise there maybe
some unpredictable behavior.
Cc: stable@vger.kernel.org
Fixes: 44fe79020b ("gpio: loongson-64bit: Add more gpio chip support")
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250610115926.347845-1-zhoubinbin@loongson.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Both ARM and IBM CI reports RCU stall, which can be reproduced by the
below perf command.
perf record -a -e cpu-clock -- sleep 2
The issue is introduced by the generic throttle patch set, which
unconditionally invoke the event_stop() when throttle is triggered.
The cpu-clock and task-clock are two special SW events, which rely on
the hrtimer. The throttle is invoked in the hrtimer handler. The
event_stop()->hrtimer_cancel() waits for the handler to finish, which is
a deadlock. Instead of invoking the stop(), the HRTIMER_NORESTART should
be used to stop the timer.
There may be two ways to fix it:
- Introduce a PMU flag to track the case. Avoid the event_stop in
perf_event_throttle() if the flag is detected.
It has been implemented in the
https://lore.kernel.org/lkml/20250528175832.2999139-1-kan.liang@linux.intel.com/
The new flag was thought to be an overkill for the issue.
- Add a check in the event_stop. Return immediately if the throttle is
invoked in the hrtimer handler. Rely on the existing HRTIMER_NORESTART
method to stop the timer.
The latter is implemented here.
Move event->hw.interrupts = MAX_INTERRUPTS before the stop(). It makes
the order the same as perf_event_unthrottle(). Except the patch, no one
checks the hw.interrupts in the stop(). There is no impact from the
order change.
When stops in the throttle, the event should not be updated,
stop(event, 0). But the cpu_clock_event_stop() doesn't handle the flag.
In logic, it's wrong. But it didn't bring any problems with the old
code, because the stop() was not invoked when handling the throttle.
Checking the flag before updating the event.
Fixes: 9734e25fbf ("perf: Fix the throttle logic for a group")
Closes: https://lore.kernel.org/lkml/20250527161656.GJ2566836@e132581.arm.com/
Closes: https://lore.kernel.org/lkml/djxlh5fx326gcenwrr52ry3pk4wxmugu4jccdjysza7tlc5fef@ktp4rffawgcw/
Closes: https://lore.kernel.org/lkml/8e8f51d8-af64-4d9e-934b-c0ee9f131293@linux.ibm.com/
Closes: https://lore.kernel.org/lkml/4ce106d0-950c-aadc-0b6a-f0215cd39913@maine.edu/
Reported-by: Leo Yan <leo.yan@arm.com>
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20250606192546.915765-1-kan.liang@linux.intel.com
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 4e4aafcddb ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 080bb352fa ("net: phy: Maintain MDIO device and bus statistics")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the SPI IPM controller found in the MediaTek
Dimensity 9400 (MT6991) SoC. As a note, this is the same SPI
IPM Controller IP found on the MT8196 Kompanio counterpart.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250611110747.458090-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the SPI IPM controller found on MediaTek's MT6991
(Dimensity) and MT8196 (Kompanio) SoCs, with both having the same
controller IP, hence being fully compatible with each other.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250611110747.458090-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing OF dependency and drop of_match_ptr() use.
This fixes the following LKP report:
"
>> drivers/regulator/rpi-panel-v2-regulator.c:95:34: warning: 'rpi_panel_v2_dt_ids' defined but not used [-Wunused-const-variable=]
static const struct of_device_id rpi_panel_v2_dt_ids[] = {
^~~~~~~~~~~~~~~~~~~
"
Fixes: d49305862f ("regulator: rpi-panel-v2: Add regulator for 7" Raspberry Pi 720x1280")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506100440.fyTGO7CG-lkp@intel.com/
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20250609223012.87764-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The BD718x7 needs to disable voltage monitoring for a duration of
certain voltage changes.
The comment explaining use of msleep(1) instead of a more accurate
delay(), was placed to a function which disabled the protection. The
actual sleeping is done in a different place of the code, after the
voltage has been changed.
Browsing through the comment and code after the years made me to scratch
my head for a second. I may have figured why me and so many fellow
developers are slowly getting bald.
Clarify things a bit and move the comment about required delay directly
above the sleep. Leave only a small comment explaining why the protection
is disabled to the spot where the logic for disabling is.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/a90cb77e66a253f4055bbb99672dc81c7457de66.1749533040.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
NeilBrown <neil@brown.name> says:
The following 4 patches provide further cleanup that serves as
preparation for some dir-locking API changes that I want to make.
* patches from https://lore.kernel.org/20250608230952.20539-1-neil@brown.name:
exportfs: use lookup_one_unlocked()
coda: use iterate_dir() in coda_readdir()
VFS: Minor fixes for porting.rst
VFS: merge lookup_one_qstr_excl_raw() back into lookup_one_qstr_excl()
Link: https://lore.kernel.org/20250608230952.20539-1-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
rather than locking the directory and using lookup_one(), just use
lookup_one_unlocked(). This keeps locking code centralised.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250608230952.20539-5-neil@brown.name
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The code in coda_readdir() is nearly identical to iterate_dir().
Differences are:
- iterate_dir() is killable
- iterate_dir() adds permission checking and accessing notifications
I believe these are not harmful for coda so it is best to use
iterate_dir() directly. This will allow locking changes without
touching the code in coda.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250608230952.20539-4-neil@brown.name
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This paragraph was relevant for an earlier version of the code which
passed the qstr as a struct instead of a point. The version that landed
passed the pointer in all cases so this para is now pointless.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250608230952.20539-3-neil@brown.name
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The effect of lookup_one_qstr_excl_raw() can be achieved by passing
LOOKUP_CREATE() to lookup_one_qstr_excl() - we don't need a separate
function.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/20250608230952.20539-2-neil@brown.name
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: 1ffe095901 ("udmabuf: fix dma-buf cpu access")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250507160913.2084079-3-m.szyprowski@samsung.com
For the evict fail case, the evict error should be returned.
v2: Consider ENOENT case.
v3: Abort directly when the eviction failed for some reason (except for -ENOENT)
and not wait for the move to finish
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250603091154.3472646-1-Emily.Deng@amd.com
Add in the mt8395-genio-1200-evk devicetree the memory regions for the
Audio DSP (ADSP) and Audio Front-End (AFE), and a sound card node
configured to use the ADSP.
This enables audio output through the 3.5mm headphone jacks (speaker or
earphone), available on the board.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250526-mt8395-genio-1200-evk-sound-v1-1-142fb15292c5@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
