No point in going down into the iomap mapping loop when we know it
will be rejected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
XFS processes truncating unlinked inodes asynchronously and thus the free
space pool only sees them with a delay. The non-zoned write path thus
calls into inodegc to accelerate this processing before failing an
allocation due the lack of free blocks. Do the same for the zoned space
reservation.
Fixes: 0bb2193056 ("xfs: add support for zoned space reservations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
This was my first attempt at caching the last used zone. But it turns out
for O_DIRECT or RWF_DONTCACHE that operate concurrently or in very short
sequence, the bmap btree does not record a written extent yet, so it fails.
Because it then still finds the last written zone it can lead to a weird
ping-pong around a few zones with writers seeing different values.
Remove it entirely as the later added xfs_cached_zone actually does a
much better job enforcing the locality as the zone is associated with the
inode in the MRU cache as soon as the zone is selected.
Fixes: 4e4d520755 ("xfs: add the zoned space allocator")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
XFS support for zoned block devices requires the realtime subvolume
support (XFS_RT) to be enabled. Change the default configuration value
of XFS_RT from N to CONFIG_BLK_DEV_ZONED to align with this requirement.
This change still allows the user to disable XFS_RT if this feature is
not desired for the user use case.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The ASUS ProArt PX13 has a spurious wakeup event from the touchpad
a few moments after entering hardware sleep. This can be avoided
by preventing the touchpad from being a wake source.
Add to the wakeup ignore list.
Reported-by: Amit Chaudhari <amitchaudhari@mac.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4482
Tested-by: Amit Chaudhari <amitchaudhari@mac.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/20250814183430.3887973-1-superm1@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit f08d0c3a71 ("pidfd: add PIDFD_SELF* sentinels to refer to own
thread/process") introduced a leak by acquiring a pid reference through
get_task_pid(), which increments pid->count but never drops it with
put_pid().
As a result, kmemleak reports unreferenced pid objects after running
tools/testing/selftests/pidfd/pidfd_test, for example:
unreferenced object 0xff1100206757a940 (size 160):
comm "pidfd_test", pid 16965, jiffies 4294853028
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 fd 57 50 04 .............WP.
5e 44 00 00 00 00 00 00 18 de 34 17 01 00 11 ff ^D........4.....
backtrace (crc cd8844d4):
kmem_cache_alloc_noprof+0x2f4/0x3f0
alloc_pid+0x54/0x3d0
copy_process+0xd58/0x1740
kernel_clone+0x99/0x3b0
__do_sys_clone3+0xbe/0x100
do_syscall_64+0x7b/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by calling put_pid() after do_pidfd_send_signal() returns.
Fixes: f08d0c3a71 ("pidfd: add PIDFD_SELF* sentinels to refer to own thread/process")
Signed-off-by: Adrian Huang (Lenovo) <adrianhuang0701@gmail.com>
Link: https://lore.kernel.org/20250818134310.12273-1-adrianhuang0701@gmail.com
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Userspace doesn't expect a failure to list extended attributes:
$ ls -lA /sys/
ls: /sys/: No data available
ls: /sys/kernel: No data available
ls: /sys/power: No data available
ls: /sys/class: No data available
ls: /sys/devices: No data available
ls: /sys/dev: No data available
ls: /sys/hypervisor: No data available
ls: /sys/fs: No data available
ls: /sys/bus: No data available
ls: /sys/firmware: No data available
ls: /sys/block: No data available
ls: /sys/module: No data available
total 0
drwxr-xr-x 2 root root 0 Jan 1 1970 block
drwxr-xr-x 52 root root 0 Jan 1 1970 bus
drwxr-xr-x 88 root root 0 Jan 1 1970 class
drwxr-xr-x 4 root root 0 Jan 1 1970 dev
drwxr-xr-x 11 root root 0 Jan 1 1970 devices
drwxr-xr-x 3 root root 0 Jan 1 1970 firmware
drwxr-xr-x 10 root root 0 Jan 1 1970 fs
drwxr-xr-x 2 root root 0 Jul 2 09:43 hypervisor
drwxr-xr-x 14 root root 0 Jan 1 1970 kernel
drwxr-xr-x 251 root root 0 Jan 1 1970 module
drwxr-xr-x 3 root root 0 Jul 2 09:43 power
Fix it by simply reporting success when no extended attributes are
available instead of reporting ENODATA.
Link: https://lore.kernel.org/78b13bcdae82ade95e88f315682966051f461dde.camel@linaro.org
Fixes: d1f4e90260 ("kernfs: remove iattr_mutex") # mainline only
Reported-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/20250819-ahndung-abgaben-524a535f8101@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
The coredump_parse() function is bool type. It should return true on
success and false on failure. The cn_printf() returns zero on success
or negative error codes. This mismatch means that when "return err;"
here, it is treated as success instead of failure. Change it to return
false instead.
Fixes: a5715af549 ("coredump: make coredump_parse() return bool")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/aKRGu14w5vPSZLgv@stanley.mountain
Signed-off-by: Christian Brauner <brauner@kernel.org>
There's issue as follows:
BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110
Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x2c/0x390
print_report+0xb4/0x270
kasan_report+0xb8/0xf0
end_buffer_read_sync+0xe3/0x110
end_bio_bh_io_sync+0x56/0x80
blk_update_request+0x30a/0x720
scsi_end_request+0x51/0x2b0
scsi_io_completion+0xe3/0x480
? scsi_device_unbusy+0x11e/0x160
blk_complete_reqs+0x7b/0x90
handle_softirqs+0xef/0x370
irq_exit_rcu+0xa5/0xd0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
Above issue happens when do ntfs3 filesystem mount, issue may happens
as follows:
mount IRQ
ntfs_fill_super
read_cache_page
do_read_cache_folio
filemap_read_folio
mpage_read_folio
do_mpage_readpage
ntfs_get_block_vbo
bh_read
submit_bh
wait_on_buffer(bh);
blk_complete_reqs
scsi_io_completion
scsi_end_request
blk_update_request
end_bio_bh_io_sync
end_buffer_read_sync
__end_buffer_read_notouch
unlock_buffer
wait_on_buffer(bh);--> return will return to caller
put_bh
--> trigger stack-out-of-bounds
In the mpage_read_folio() function, the stack variable 'map_bh' is
passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and
wait_on_buffer() returns to continue processing, the stack variable
is likely to be reclaimed. Consequently, during the end_buffer_read_sync()
process, calling put_bh() may result in stack overrun.
If the bh is not allocated on the stack, it belongs to a folio. Freeing
a buffer head which belongs to a folio is done by drop_buffers() which
will fail to free buffers which are still locked. So it is safe to call
put_bh() before __end_buffer_read_notouch().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/20250811141830.343774-1-yebin@huaweicloud.com
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In get_channel(), the reference obtained by bus_find_device_by_name()
was dropped via put_device() before accessing the device's driver data
Move put_device() after usage to avoid potential issues.
Fixes: 2485055394 ("staging: most: core: drop device reference")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250804082955.3621026-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `insn_rw_emulate_bits()` function is used as a default handler for
`INSN_READ` instructions for subdevices that have a handler for
`INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default
handler for `INSN_WRITE` instructions for subdevices that have a handler
for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the
`INSN_READ` or `INSN_WRITE` instruction handling with a constructed
`INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE`
instructions are supposed to be able read or write multiple samples,
indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently
only handles a single sample. For `INSN_READ`, the comedi core will
copy `insn->n` samples back to user-space. (That triggered KASAN
kernel-infoleak errors when `insn->n` was greater than 1, but that is
being fixed more generally elsewhere in the comedi core.)
Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return
an error, to conform to the general expectation for `INSN_READ` and
`INSN_WRITE` handlers.
Fixes: ed9eccbe89 ("Staging: add comedi core")
Cc: stable <stable@kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250725141034.87297-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernel
buffer is allocated to hold `insn->n` samples (each of which is an
`unsigned int`). For some instruction types, `insn->n` samples are
copied back to user-space, unless an error code is being returned. The
problem is that not all the instruction handlers that need to return
data to userspace fill in the whole `insn->n` samples, so that there is
an information leak. There is a similar syzbot report for
`do_insnlist_ioctl()`, although it does not have a reproducer for it at
the time of writing.
One culprit is `insn_rw_emulate_bits()` which is used as the handler for
`INSN_READ` or `INSN_WRITE` instructions for subdevices that do not have
a specific handler for that instruction, but do have an `INSN_BITS`
handler. For `INSN_READ` it only fills in at most 1 sample, so if
`insn->n` is greater than 1, the remaining `insn->n - 1` samples copied
to userspace will be uninitialized kernel data.
Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. It
never returns an error, even if it fails to fill the buffer.
Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making sure
that uninitialized parts of the allocated buffer are zeroed before
handling each instruction.
Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fix
replaced the call to `kmalloc_array()` with `kcalloc()`, but it is not
always necessary to clear the whole buffer.
Fixes: ed9eccbe89 ("Staging: add comedi core")
Reported-by: syzbot+a5e45f768aab5892da5d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a5e45f768aab5892da5d
Reported-by: syzbot+fb4362a104d45ab09cf9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fb4362a104d45ab09cf9
Cc: stable <stable@kernel.org> # 5.13+
Cc: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250725125324.80276-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reproducer passed in an irq number(0x80008000) that was too large,
which triggered the oob.
Added an interrupt number check to prevent users from passing in an irq
number that was too large.
If `it->options[1]` is 31, then `1 << it->options[1]` is still invalid
because it shifts a 1-bit into the sign bit (which is UB in C).
Possible solutions include reducing the upper bound on the
`it->options[1]` value to 30 or lower, or using `1U << it->options[1]`.
The old code would just not attempt to request the IRQ if the
`options[1]` value were invalid. And it would still configure the
device without interrupts even if the call to `request_irq` returned an
error. So it would be better to combine this test with the test below.
Fixes: fff4620724 ("staging: comedi: pcl726: enable the interrupt support code")
Cc: stable <stable@kernel.org> # 5.13+
Reported-by: syzbot+5cd373521edd68bebcb3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5cd373521edd68bebcb3
Tested-by: syzbot+5cd373521edd68bebcb3@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/tencent_3C66983CC1369E962436264A50759176BF09@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cdx_rpmsg_probe(), strscpy() is incorrectly called with the length of
the source string (excluding the NUL terminator) rather than the size of
the destination buffer. This results in one character less being copied
from 'cdx_rpmsg_id_table[0].name' to 'chinfo.name'.
Use the destination buffer size instead to ensure the name is copied
correctly.
Cc: stable <stable@kernel.org>
Fixes: 2a226927d9 ("cdx: add rpmsg communication channel for CDX")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250806090512.121260-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dma_map_sgtable() returns only 0 or the error code. Read sgt->nents to
get the number of mapped segments.
Fixes: 37e0070322 ("zynq_fpga: use sgtable-based scatterlist wrappers")
Reported-by: Pavel Pisa <pisa@fel.cvut.cz>
Closes: https://lore.kernel.org/linux-fpga/202508041548.22955.pisa@fel.cvut.cz/
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Tested-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://lore.kernel.org/r/20250806070605.1920909-2-yilun.xu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fusb302 irq handler has been carefully optimized by Hans de Goede in
commit 207338ec5a ("usb: typec: fusb302: Improve suspend/resume
handling"). A recent 'fix' undid most of that work to avoid a virtio-gpio
driver bug.
This reverts the incorrect fix, since it is of very low quality. It
reverts the quirks from Hans change (and thus reintroduces the problems
fixed by Hans) while keeping the overhead from the original change.
The proper fix to support using fusb302 with an interrupt line provided
by virtio-gpio must be implemented in the virtio driver instead, which
should support disabling the IRQ from the fusb302 interrupt routine.
Cc: Hans de Goede <hansg@kernel.org>
Cc: Yongbo Zhang <giraffesnn123@gmail.com>
Fixes: 1c2d81bded ("usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250818-fusb302-unthreaded-irq-v1-1-3a9a11a9f56f@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kerneldoc added for usb_hcd_giveback_urb() by commit 41631d3616
("usb: core: Replace in_interrupt() in comments") is unclear and
incorrect. Update the text for greater clarity and to say that URBs
for a root hub will always use a BH context for their completion.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/41eaae05-116a-4568-940c-eeb94ab6baa0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To enable HSR / Switch offload, certain configurations are needed.
Currently they are done inside icssg_change_mode(). This function only
gets called if we move from one mode to another without bringing the
links up / down.
Once in HSR / Switch mode, if we bring the links down and bring it back
up again. The callback sequence is,
- emac_ndo_stop()
Firmwares are stopped
- emac_ndo_open()
Firmwares are loaded
In this path icssg_change_mode() doesn't get called and as a result the
configurations needed for HSR / Switch is not done.
To fix this, put all these configurations in a separate function
icssg_enable_fw_offload() and call this from both icssg_change_mode()
and emac_ndo_open()
Fixes: 56375086d0 ("net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20250814105106.1491871-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ppp_fill_forward_path() has two race conditions:
1. The ppp->channels list can change between list_empty() and
list_first_entry(), as ppp_lock() is not held. If the only channel
is deleted in ppp_disconnect_channel(), list_first_entry() may
access an empty head or a freed entry, and trigger a panic.
2. pch->chan can be NULL. When ppp_unregister_channel() is called,
pch->chan is set to NULL before pch is removed from ppp->channels.
Fix these by using a lockless RCU approach:
- Use list_first_or_null_rcu() to safely test and access the first list
entry.
- Convert list modifications on ppp->channels to their RCU variants and
add synchronize_net() after removal.
- Check for a NULL pch->chan before dereferencing it.
Fixes: f6efc675c9 ("net: ppp: resolve forwarding path for bridge pppoe devices")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20250814012559.3705-2-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ensure ndo_fill_forward_path() is called with RCU lock held.
Fixes: 2830e31477 ("net: ethernet: mtk-ppe: fix traffic offload with bridged wlan")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20250814012559.3705-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current GDS mitigation logic incorrectly returns early when the
attack vector mitigation is turned off, which leads to two problems:
1. CPUs without ARCH_CAP_GDS_CTRL support are incorrectly marked with
GDS_MITIGATION_OFF when they should be marked as
GDS_MITIGATION_UCODE_NEEDED.
2. The mitigation state checks and locking verification that follow are
skipped, which means:
- fail to detect if the mitigation was locked
- miss the warning when trying to disable a locked mitigation
Remove the early return to ensure proper mitigation state handling. This
allows:
- Proper mitigation classification for non-ARCH_CAP_GDS_CTRL CPUs
- Complete mitigation state verification
This also addresses the failed MSR 0x123 write attempt at boot on
non-ARCH_CAP_GDS_CTRL CPUs:
unchecked MSR access error: WRMSR to 0x123 (tried to write 0x0000000000000010) at rIP: ... (update_gds_msr)
Call Trace:
identify_secondary_cpu
start_secondary
common_startup_64
WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/bugs.c:1053 update_gds_msr
[ bp: Massage, zap superfluous braces. ]
Fixes: 8c7261abcb ("x86/bugs: Add attack vector controls for GDS")
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/20250819023356.2012-1-lirongqing@baidu.com
CACHE_MODE_0 registers should be saved and restored as part of
the context, not during engine reset. Move the related workaround
(Disable Repacking for Compression) from rcs_engine_wa_init()
to icl_ctx_workarounds_init() for Jasper Lake and Elkhart
Lake platforms. This ensures the WA is applied during context
initialisation.
BSPEC: 11322
Fixes: 0ddae025ab ("drm/i915: Disable compression tricks on JSL")
Closes: Fixes: 0ddae025ab ("drm/i915: Disable compression tricks on JSL")
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Cc: stable@vger.kernel.org # v6.13+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/4feaa24094e019e000ceb6011d8cd419b0361b3f.1754902406.git.sebastian.brzezinka@intel.com
(cherry picked from commit c9932f0d60)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Commit 8d9908e8fe ("drm/i915/display: remove small micro-optimizations
in irq handling") not only removed the optimizations, it also enabled
wakeref asserts for the GEN11_GU_MISC_IIR access. Silence the asserts by
wrapping the access inside intel_display_rpm_assert_{block,unblock}().
Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Closes: https://lore.kernel.org/r/aG0tWkfmxWtxl_xc@zx2c4.com
Fixes: 8d9908e8fe ("drm/i915/display: remove small micro-optimizations in irq handling")
Cc: stable@vger.kernel.org # v6.13+
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250805115656.832235-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit cbd3baeffb)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Add a PCI quirk to enable microphone input on the headphone jack on
the ASUS Zenbook 14 UM3406HA laptop.
This model uses an ALC294 codec with CS35L41 amplifiers over I2C,
and the existing fixup for it did not enable the headset microphone.
A new fix is introduced to get the mic working while keeping the
amplifier settings correct.
Fixes: 61cbc08fdb ("ALSA: hda/realtek: Add quirks for ASUS 2024 Zenbooks")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20250818204243.247297-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ESI/MSI is a performance optimization feature that provides dedicated
interrupts per MCQ hardware queue. This is optional feature and UFS MCQ
should work with and without ESI feature.
Commit e46a28cea2 ("scsi: ufs: qcom: Remove the MSI descriptor abuse")
brings a regression in ESI (Enhanced System Interrupt) configuration that
causes a null pointer dereference when Platform MSI allocation fails.
The issue occurs in when platform_device_msi_init_and_alloc_irqs() in
ufs_qcom_config_esi() fails (returns -EINVAL) but the current code uses
__free() macro for automatic cleanup free MSI resources that were never
successfully allocated.
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000008
Call trace:
mutex_lock+0xc/0x54 (P)
platform_device_msi_free_irqs_all+0x1c/0x40
ufs_qcom_config_esi+0x1d0/0x220 [ufs_qcom]
ufshcd_config_mcq+0x28/0x104
ufshcd_init+0xa3c/0xf40
ufshcd_pltfrm_init+0x504/0x7d4
ufs_qcom_probe+0x20/0x58 [ufs_qcom]
Fix by restructuring the ESI configuration to try MSI allocation first,
before any other resource allocation and instead use explicit cleanup
instead of __free() macro to avoid cleanup of unallocated resources.
Tested on SM8750 platform with MCQ enabled, both with and without
Platform ESI support.
Fixes: e46a28cea2 ("scsi: ufs: qcom: Remove the MSI descriptor abuse")
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250811073330.20230-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The name ufshcd_wait_for_doorbell_clr() refers to legacy mode. Commit
8d077ede48 ("scsi: ufs: Optimize the command queueing code") added
support for MCQ mode in this function. Since then the name of this
function is misleading. Hence change the name of this function into
something that is appropriate for both legacy and MCQ mode.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_wait_for_dev_cmd() and all its callers can return an OCS error.
OCS errors are represented by positive integers. Remove the WARN_ONCE()
statements that complain about positive error codes and update the
documentation.
Keep the behavior of ufshcd_wait_for_dev_cmd() because this return value
may end be passed as the second argument of bsg_job_done() and
bsg_job_done() handles positive and negative error codes differently.
Cc: Peter Wang <peter.wang@mediatek.com>
Fixes: cc59f3b685 ("scsi: ufs: core: Improve return value documentation")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-4-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UIC completion interrupt may be disabled while an UIC command is
being processed. When the UIC completion interrupt is reenabled, an UIC
interrupt is triggered and the WARN_ON_ONCE(!cmd) statement is hit.
Hence this patch that removes this kernel warning.
Fixes: fcd8b0450a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to analyze")
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Matthieu Baerts says:
====================
mptcp: misc fixes for v6.17-rc
Here are various fixes:
- Patch 1: Better handling SKB extension allocation failures.
A fix for v5.7.
- Patches 2, 3: Avoid resetting MPTCP limits when flushing MPTCP
endpoints. With a validation in the selftests. Fixes for v5.7.
- Patches 4, 5, 6: Disallow '0' as ADD_ADDR retransmission timeout.
With a preparation patch, and a validation in the selftests.
Fixes for v5.11.
- Patches 8, 9: Fix C23 extension warnings in the selftests,
spotted by GCC. Fixes for v6.16.
====================
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-0-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC was complaining about the new label:
mptcp_inq.c:79:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
79 | int err = getaddrinfo(node, service, hints, res);
| ^
mptcp_sockopt.c:166:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
166 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: dd367e81b7 ("selftests: mptcp: sockopt: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-8-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC was complaining about the new label:
mptcp_connect.c:187:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
187 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: a862771d1a ("selftests: mptcp: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-7-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To prevent test instability in the "delete re-add signal" test caused by
ADD_ADDR retransmissions, disable retransmissions for this test by setting
net.mptcp.add_addr_timeout to 0.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-6-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When add_addr_timeout was set to 0, this caused the ADD_ADDR to be
retransmitted immediately, which looks like a buggy behaviour. Instead,
interpret 0 as "no retransmissions needed".
The documentation is updated to explicitly state that setting the timeout
to 0 disables retransmission.
Fixes: 93f323b9cc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-5-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_reset_timer() was called twice in mptcp_pm_alloc_anno_list.
Simplify the code by using a 'goto' statement to eliminate the
duplication.
Note that this is not a fix, but it will help backporting the following
patch. The same "Fixes" tag has been added for this reason.
Fixes: 93f323b9cc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-4-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A flush of the MPTCP endpoints should not affect the MPTCP limits. In
other words, 'ip mptcp endpoint flush' should not change 'ip mptcp
limits'.
But it was the case: the MPTCP_PM_ATTR_RCV_ADD_ADDRS (add_addr_accepted)
limit was reset by accident. Removing the reset of this counter during a
flush fixes this issue.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reported-by: Thomas Dreibholz <dreibh@simula.no>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/579
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-2-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When skb_ext_add(skb, SKB_EXT_MPTCP) fails in mptcp_incoming_options(),
we used to return true, letting the segment proceed through the TCP
receive path without a DSS mapping. Such segments can leave inconsistent
mapping state and trigger a mid-stream fallback to TCP, which in testing
collapsed (by artificially forcing failures in skb_ext_add) throughput
to zero.
Return false instead so the TCP input path drops the skb (see
tcp_data_queue() and step-7 processing). This is the safer choice
under memory pressure: it preserves MPTCP correctness and provides
backpressure to the sender.
Control packets remain unaffected: ACK updates and DATA_FIN handling
happen before attempting the extension allocation, and tcp_reset()
continues to ignore the return value.
With this change, MPTCP continues to work at high throughput if we
artificially inject failures into skb_ext_add.
Fixes: 6787b7e350 ("mptcp: avoid processing packet if a subflow reset")
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-1-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The seg6_genl_sethmac() directly uses the algorithm ID provided by the
userspace without verifying whether it is an HMAC algorithm supported
by the system.
If an unsupported HMAC algorithm ID is configured, packets using SRv6 HMAC
will be dropped during encapsulation or decapsulation.
Fixes: 4f4853dc1c ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: Minhong He <heminhong@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250815063845.85426-1-heminhong@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When performing Generic Segmentation Offload (GSO) on an IPv6 packet that
contains extension headers, the kernel incorrectly requests checksum offload
if the egress device only advertises NETIF_F_IPV6_CSUM feature, which has
a strict contract: it supports checksum offload only for plain TCP or UDP
over IPv6 and explicitly does not support packets with extension headers.
The current GSO logic violates this contract by failing to disable the feature
for packets with extension headers, such as those used in GREoIPv6 tunnels.
This violation results in the device being asked to perform an operation
it cannot support, leading to a `skb_warn_bad_offload` warning and a collapse
of network throughput. While device TSO/USO is correctly bypassed in favor
of software GSO for these packets, the GSO stack must be explicitly told not
to request checksum offload.
Mask NETIF_F_IPV6_CSUM, NETIF_F_TSO6 and NETIF_F_GSO_UDP_L4
in gso_features_check if the IPv6 header contains extension headers to compute
checksum in software.
The exception is a BIG TCP extension, which, as stated in commit
68e068cabd ("net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets"):
"The feature is only enabled on devices that support BIG TCP TSO.
The header is only present for PF_PACKET taps like tcpdump,
and not transmitted by physical devices."
kernel log output (truncated):
WARNING: CPU: 1 PID: 5273 at net/core/dev.c:3535 skb_warn_bad_offload+0x81/0x140
...
Call Trace:
<TASK>
skb_checksum_help+0x12a/0x1f0
validate_xmit_skb+0x1a3/0x2d0
validate_xmit_skb_list+0x4f/0x80
sch_direct_xmit+0x1a2/0x380
__dev_xmit_skb+0x242/0x670
__dev_queue_xmit+0x3fc/0x7f0
ip6_finish_output2+0x25e/0x5d0
ip6_finish_output+0x1fc/0x3f0
ip6_tnl_xmit+0x608/0xc00 [ip6_tunnel]
ip6gre_tunnel_xmit+0x1c0/0x390 [ip6_gre]
dev_hard_start_xmit+0x63/0x1c0
__dev_queue_xmit+0x6d0/0x7f0
ip6_finish_output2+0x214/0x5d0
ip6_finish_output+0x1fc/0x3f0
ip6_xmit+0x2ca/0x6f0
ip6_finish_output+0x1fc/0x3f0
ip6_xmit+0x2ca/0x6f0
inet6_csk_xmit+0xeb/0x150
__tcp_transmit_skb+0x555/0xa80
tcp_write_xmit+0x32a/0xe90
tcp_sendmsg_locked+0x437/0x1110
tcp_sendmsg+0x2f/0x50
...
skb linear: 00000000: e4 3d 1a 7d ec 30 e4 3d 1a 7e 5d 90 86 dd 60 0e
skb linear: 00000010: 00 0a 1b 34 3c 40 20 11 00 00 00 00 00 00 00 00
skb linear: 00000020: 00 00 00 00 00 12 20 11 00 00 00 00 00 00 00 00
skb linear: 00000030: 00 00 00 00 00 11 2f 00 04 01 04 01 01 00 00 00
skb linear: 00000040: 86 dd 60 0e 00 0a 1b 00 06 40 20 23 00 00 00 00
skb linear: 00000050: 00 00 00 00 00 00 00 00 00 12 20 23 00 00 00 00
skb linear: 00000060: 00 00 00 00 00 00 00 00 00 11 bf 96 14 51 13 f9
skb linear: 00000070: ae 27 a0 a8 2b e3 80 18 00 40 5b 6f 00 00 01 01
skb linear: 00000080: 08 0a 42 d4 50 d5 4b 70 f8 1a
Fixes: 04c20a9356 ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Suggested-by: Michal Schmidt <mschmidt@redhat.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jakub Ramaseuski <jramaseu@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250814105119.1525687-1-jramaseu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On DCE 6, DP audio was not working. However, it worked when an
HDMI monitor was also plugged in.
Looking at dce_aud_wall_dto_setup it seems that the main
difference is that we use DTO1 when only DP is plugged in.
When programming DTO1, it uses audio_dto_source_clock_in_khz
which is set from get_dp_ref_freq_khz
The dce60_get_dp_ref_freq_khz implementation looks incorrect,
because DENTIST_DISPCLK_CNTL seems to be always zero on DCE 6,
so it isn't usable.
I compared dce60_get_dp_ref_freq_khz to the legacy display code,
specifically dce_v6_0_audio_set_dto, and it turns out that in
case of DCE 6, it needs to use the display clock. With that,
DP audio started working on Pitcairn, Oland and Cape Verde.
However, it still didn't work on Tahiti. Despite having the
same DCE version, Tahiti seems to have a different audio device.
After some trial and error I realized that it works with the
default display clock as reported by the VBIOS, not the current
display clock.
The patch was tested on all four SI GPUs:
* Pitcairn (DCE 6.0)
* Oland (DCE 6.4)
* Cape Verde (DCE 6.0)
* Tahiti (DCE 6.0 but different)
The testing was done on Samsung Odyssey G7 LS28BG700EPXEN on
each of the above GPUs, at the following settings:
* 4K 60 Hz
* 1080p 60 Hz
* 1080p 144 Hz
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 645cc7863d)
Cc: stable@vger.kernel.org
For later VBIOS versions, the fractional feedback divider is
calculated as the remainder of dividing the feedback divider by
a factor, which is set to 1000000. For reference, see:
- calculate_fb_and_fractional_fb_divider
- calc_pll_max_vco_construct
However, in case of old VBIOS versions that have
set_pixel_clock_v3, they only have 1 byte available for the
fractional feedback divider, and it's expected to be set to the
remainder from dividing the feedback divider by 10.
For reference see the legacy display code:
- amdgpu_pll_compute
- amdgpu_atombios_crtc_program_pll
This commit fixes set_pixel_clock_v3 by dividing the fractional
feedback divider passed to the function by 100000.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 027e7acc7e)
Cc: stable@vger.kernel.org
When getting the number of connectors, the VBIOS reports
the number of valid indices, but it doesn't say which indices
are valid, and not every valid index has an actual connector.
If we don't find a connector on an index, that is not an error.
Considering these are not actual errors, don't litter the logs.
Fixes: 60df562814 ("drm/amd/display: handle invalid connector indices")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 249d4bc5f1)
On some GPUs the VBIOS just doesn't have encoder caps,
or maybe not for every encoder.
This isn't really a problem and it's handled well,
so let's not litter the logs with it.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 33e0227ee9)
Also needed by DCE 6.
This way the code that gathers this info can be shared between
different DCE versions and doesn't have to be repeated.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8107432dff)
Cc: stable@vger.kernel.org
dce110_fill_display_configs is shared between DCE 6-11, and
finding the first CRTC and its line time is relevant to DCE 6 too.
Move the code to find it from DCE 11 specific code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4ab09785f8)
Cc: stable@vger.kernel.org
