The call to idxd_free() introduces a duplicate put_device() leading to a
reference count underflow:
refcount_t: underflow; use-after-free.
WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
Call Trace:
<TASK>
idxd_remove+0xe4/0x120 [idxd]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x197/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
idxd_exit_module+0x34/0x7a0 [idxd]
__do_sys_delete_module.constprop.0+0x183/0x280
do_syscall_64+0x54/0xd70
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The idxd_unregister_devices() which is invoked at the very beginning of
idxd_remove(), already takes care of the necessary put_device() through the
following call path:
idxd_unregister_devices() -> device_unregister() -> put_device()
In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() may
trigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() is
called immediately after, it can result in a use-after-free.
Remove the improper idxd_free() to avoid both the refcount underflow and
potential memory corruption during module unload.
Fixes: d5449ff1b0 ("dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call")
Signed-off-by: Yi Sun <yi.sun@intel.com>
Tested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20250729150313.1934101-2-yi.sun@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rename is_signed_type() to is_signed_var() to avoid colliding with a macro
of the same name defined by tools' linux/overflow.h. This fixes warnings
(and presumably potential test failures) in tests that utilize the
selftests harness and happen to (indirectly) include overflow.h.
In file included from tools/include/linux/bits.h:34,
from tools/include/linux/bitops.h:14,
from tools/include/linux/hashtable.h:13,
from include/kvm_util.h:11,
from x86/userspace_msr_exit_test.c:11:
tools/include/linux/overflow.h:31:9: error: "is_signed_type" redefined [-Werror]
31 | #define is_signed_type(type) (((type)(-1)) < (type)1)
| ^~~~~~~~~~~~~~
In file included from include/kvm_test_harness.h:11,
from x86/userspace_msr_exit_test.c:9:
../kselftest_harness.h:754:9: note: this is the location of the previous definition
754 | #define is_signed_type(var) (!!(((__typeof__(var))(-1)) < (__typeof__(var))1))
| ^~~~~~~~~~~~~~
Use a separate definition, at least for now, as many selftests build
without tools/include in their include path.
Fixes: fc92099902 ("tools headers: Synchronize linux/bits.h with the kernel sources")
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250624231930.583689-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
With pch_pic device, its register is based on MMIO address space,
different access size 1/2/4/8 is supported. And base address should
be naturally aligned with its access size, here add alignment check
in its register access emulation function.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Since using kvm_get_vcpu() may fail to retrieve the vCPU context,
kvm_get_vcpu_by_id() should be used instead.
Fixes: 8e3054261b ("LoongArch: KVM: Add IPI user mode read and write function")
Fixes: 3956a52bc0 ("LoongArch: KVM: Add EIOINTC read and write functions")
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cm>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add the flag KVM_LARCH_LBT checking in function kvm_own_lbt(), so that
it can be called safely rather than duplicated enabling again.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Fprobe event accepts wildcards for the target functions, but unless user
specifies its event name, it makes an event with the wildcards.
/sys/kernel/tracing # echo 'f mutex*' >> dynamic_events
/sys/kernel/tracing # cat dynamic_events
f:fprobes/mutex*__entry mutex*
/sys/kernel/tracing # ls events/fprobes/
enable filter mutex*__entry
To fix this, replace the wildcard ('*') with an underscore.
Link: https://lore.kernel.org/all/175535345114.282990.12294108192847938710.stgit@devnote2/
Fixes: 334e5519c3 ("tracing/probes: Add fprobe events for tracing function entry and exit.")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Since the identity mapping is pinned to address zero the lowcore is always
also mapped to address zero, this happens regardless of the relocate_lowcore
command line option. If the option is specified the lowcore is mapped
twice, instead of only once.
This means that NULL pointer accesses will succeed instead of causing an
exception (low address protection still applies, but covers only parts).
To fix this never map the first two pages of physical memory with the
identity mapping.
Fixes: 32db401965 ("s390/mm: Pin identity mapping base to zero")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tracing code called by the SCLP interrupt handler contains early exits
if the SCCB address associated with an interrupt is NULL. This check is
performed after physical to virtual address translation.
If the kernel identity mapping does not start at address zero, the
resulting virtual address is never zero, so that the NULL checks won't
work. Subsequently this may result in incorrect accesses to the first
page of the identity mapping.
Fix this by introducing a function that handles the NULL case before
address translation.
Fixes: ada1da31ce ("s390/sclp: sort out physical vs virtual pointers usage")
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Similar to powerpc set HZ to 1000. See also commit a206d23340
("powerpc/defconfigs: Set HZ=1000 on ppc64 and powernv defconfigs").
Besides other this will reduce the latency seen with synchronize_rcu().
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Production silicon for CS36L63 has some small differences compared to
pre-production silicon. Remove soundwire clock workaround as no
longer necessary. We don't want to do tricks with low-level clocking
controls if we don't need to.
Fixes: 978858791c ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250820142209.127575-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CS35L63 uses different algorithm IDs from CS35L56.
Add a new mechanism to handle different alg IDs between parts in the
CS35L56 driver.
Fixes: 978858791c ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250820142209.127575-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Production silicon for CS36L63 has some small differences compared to
pre-production silicon. Update firmware addresses, which are different.
No product was ever released with pre-production silicon so there is no
need for the driver to include support for it.
Fixes: 978858791c ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250820142209.127575-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 57fbad15c2 ("stackleak: Rename STACKLEAK to KSTACK_ERASE")
misses the stackframe.h part for LoongArch, so fix it.
Fixes: 57fbad15c2 ("stackleak: Rename STACKLEAK to KSTACK_ERASE")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now if preemption happens between protected_save_fpu_context() and
protected_save_lbt_context(), FTOP context is lost. Because FTOP is
saved by protected_save_lbt_context() but protected_save_fpu_context()
disables TM before that. So save LBT before FPU in setup_sigcontext()
to avoid this potential risk.
Signed-off-by: Hanlu Li <lihanlu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When enabling CONFIG_KASAN, CONFIG_PREEMPT_VOLUNTARY_BUILD and
CONFIG_PREEMPT_VOLUNTARY at the same time, there will be soft deadlock,
the relevant logs are as follows:
rcu: INFO: rcu_sched self-detected stall on CPU
...
Call Trace:
[<900000000024f9e4>] show_stack+0x5c/0x180
[<90000000002482f4>] dump_stack_lvl+0x94/0xbc
[<9000000000224544>] rcu_dump_cpu_stacks+0x1fc/0x280
[<900000000037ac80>] rcu_sched_clock_irq+0x720/0xf88
[<9000000000396c34>] update_process_times+0xb4/0x150
[<90000000003b2474>] tick_nohz_handler+0xf4/0x250
[<9000000000397e28>] __hrtimer_run_queues+0x1d0/0x428
[<9000000000399b2c>] hrtimer_interrupt+0x214/0x538
[<9000000000253634>] constant_timer_interrupt+0x64/0x80
[<9000000000349938>] __handle_irq_event_percpu+0x78/0x1a0
[<9000000000349a78>] handle_irq_event_percpu+0x18/0x88
[<9000000000354c00>] handle_percpu_irq+0x90/0xf0
[<9000000000348c74>] handle_irq_desc+0x94/0xb8
[<9000000001012b28>] handle_cpu_irq+0x68/0xa0
[<9000000001def8c0>] handle_loongarch_irq+0x30/0x48
[<9000000001def958>] do_vint+0x80/0xd0
[<9000000000268a0c>] kasan_mem_to_shadow.part.0+0x2c/0x2a0
[<90000000006344f4>] __asan_load8+0x4c/0x120
[<900000000025c0d0>] module_frob_arch_sections+0x5c8/0x6b8
[<90000000003895f0>] load_module+0x9e0/0x2958
[<900000000038b770>] __do_sys_init_module+0x208/0x2d0
[<9000000001df0c34>] do_syscall+0x94/0x190
[<900000000024d6fc>] handle_syscall+0xbc/0x158
After analysis, this is because the slow speed of loading the amdgpu
module leads to the long time occupation of the cpu and then the soft
deadlock.
When loading a module, module_frob_arch_sections() tries to figure out
the number of PLTs/GOTs that will be needed to handle all the RELAs. It
will call the count_max_entries() to find in an out-of-order date which
counting algorithm has O(n^2) complexity.
To make it faster, we sort the relocation list by info and addend. That
way, to check for a duplicate relocation, it just needs to compare with
the previous entry. This reduces the complexity of the algorithm to O(n
log n), as done in commit d4e0340919 ("arm64/module: Optimize module
load time by optimizing PLT counting"). This gives sinificant reduction
in module load time for modules with large number of relocations.
After applying this patch, the soft deadlock problem has been solved,
and the kernel starts normally without "Call Trace".
Using the default configuration to test some modules, the results are as
follows:
Module Size
ip_tables 36K
fat 143K
radeon 2.5MB
amdgpu 16MB
Without this patch:
Module Module load time (ms) Count(PLTs/GOTs)
ip_tables 18 59/6
fat 0 162/14
radeon 54 1221/84
amdgpu 1411 4525/1098
With this patch:
Module Module load time (ms) Count(PLTs/GOTs)
ip_tables 18 59/6
fat 0 162/14
radeon 22 1221/84
amdgpu 45 4525/1098
Fixes: fcdfe9d22b ("LoongArch: Add ELF and module support")
Signed-off-by: Kanglong Wang <wangkanglong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When the CPU is offline, the timer of LoongArch is not correctly closed.
This is harmless for real machines, but resulting in an excessively high
cpu usage rate of the offline vCPU thread in the virtual machines.
To correctly close the timer, we have made the following modifications:
Register the cpu hotplug event (CPUHP_AP_LOONGARCH_ARCH_TIMER_STARTING)
for LoongArch. This event's hooks will be called to close the timer when
the CPU is offline.
Clear the timer interrupt when the timer is turned off. Since before the
timer is turned off, there may be a timer interrupt that has already been
in the pending state due to the interruption of the disabled, which also
affects the halt state of the offline vCPU.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The default COMMAND_LINE_SIZE of 512, inherited from asm-generic, is
too small for modern use cases. For example, kdump configurations or
extensive debugging parameters can easily exceed this limit.
Therefore, increase the command line size to 4096 bytes, aligning
LoongArch with the MIPS architecture. This change follows a broader
trend among architectures to raise this limit to support modern needs;
for instance, PowerPC increased its value for similar reasons in the
commit a5980d064f ("powerpc: Bump COMMAND_LINE_SIZE to 2048").
Similar to the change made for RISC-V in the commit 61fc1ee8be
("riscv: Bump COMMAND_LINE_SIZE value to 1024"), this is considered
a safe change. The broader kernel community has reached a consensus
that modifying COMMAND_LINE_SIZE from UAPI headers does not constitute
a uABI breakage, as well-behaved userspace applications should not
rely on this macro.
Suggested-by: Huang Cun <cunhuang@tencent.com>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Note that it should also pass the compiler option -mannotate-tablejump
rather than only pass '-mllvm --loongarch-annotate-tablejump' to ld.lld
if LTO is enabled, otherwise there are no jump info for some table jump
instructions.
Fixes: e20ab7d454 ("LoongArch: Enable jump table for objtool")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Before doing the above changes, it should handle the special case of the
relocation section '.rela.discard.tablejump_annotate' to get the correct
table size first, otherwise there are many objtool warnings and errors
if LTO is enabled.
There are many different rodata for each function if LTO is enabled, it
is necessary to enhance get_rodata_table_size_by_table_annotate().
Fixes: b95f852d3a ("objtool/LoongArch: Add support for switch table")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The kernel is not supported to run as a Xen guest on Xen versions
older than 4.0.
Remove xen_strict_xenbus_quirk() which is testing the Xen version to be
at least 4.0.
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250815074052.13792-1-jgross@suse.com>
Replace the manual bitwise conversion of bytes to MB with
SZ_1M macro, a standard macro used within the mm subsystem,
to improve readability.
Signed-off-by: Pratyush Brahma <pratyush.brahma@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250820-numa-memblks-refac-v2-1-43bf1af02acd@oss.qualcomm.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
Fixes: 0db89fa243 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250722143233.3970607-1-yu.c.chen@intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This warning was triggered during testing on v6.16:
notifier callback ftrace_suspend_notifier_call already registered
WARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0
...
Call Trace:
<TASK>
blocking_notifier_chain_register+0x34/0x60
register_ftrace_graph+0x330/0x410
ftrace_profile_write+0x1e9/0x340
vfs_write+0xf8/0x420
? filp_flush+0x8a/0xa0
? filp_close+0x1f/0x30
? do_dup2+0xaf/0x160
ksys_write+0x65/0xe0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When writing to the function_profile_enabled interface, the notifier was
not unregistered after start_graph_tracing failed, causing a warning the
next time function_profile_enabled was written.
Fixed by adding unregister_pm_notifier in the exception path.
Link: https://lore.kernel.org/20250818073332.3890629-1-yeweihua4@huawei.com
Fixes: 4a2b8dda3f ("tracing/function-graph-tracer: fix a regression while suspend to disk")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com
Fixes: 8c9af478c0 ("ftrace: Handle commands when closing set_ftrace_filter file")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Christoph Hellwig <hch@lst.de> says:
Hi all,
while trying to add XFS support for passing through metadata I ran
into a few issues with how that support is wire up for the current
block device use cases, and this fixes it.
* patches from https://lore.kernel.org/20250819082517.2038819-1-hch@lst.de:
block: don't silently ignore metadata for sync read/write
fs: add a FMODE_ flag to indicate IOCB_HAS_METADATA availability
Link: https://lore.kernel.org/20250819082517.2038819-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The block fops don't try to handle metadata for synchronous requests,
probably because the completion handler looks at dio->iocb which is not
valid for synchronous requests.
But silently ignoring metadata (or warning in case of
__blkdev_direct_IO_simple) is a really bad idea as that can cause
silent data corruption if a user ever shows up.
Instead simply handle metadata for synchronous requests as the completion
handler can simply check for bio_integrity() as the block layer default
integrity will already be freed at this point, and thus bio_integrity()
will only return true for user mapped integrity.
Fixes: 3d8b5a22d4 ("block: add support to pass user meta buffer")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250819082517.2038819-3-hch@lst.de
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently the kernel will happily route io_uring requests with metadata
to file operations that don't support it. Add a FMODE_ flag to guard
that.
Fixes: 4de2ce04c8 ("fs: introduce IOCB_HAS_METADATA for metadata")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250819082517.2038819-2-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Usual mixed bunch of ancient issues and relatively new ones.
adi,ad7124
- Fix channel lookup to use chan->address for indexing array.
adi,ad7173
- Stop accidentally enabling more configs than supported at one time.
adi,ad7380
- Fill in missing max_conversion_rate_hz for adaq4381-4
ams,as73211
- Fix uninitialized holes in scan data exposed to userspace.
bosch,bmp280
- Check for error when requesting optional GPIO rather than simply assuming
success or a NULL return when no GPIO provided.
invensense,icm42600
- Change error code returned to -EBUSY on a temperature read with neither
accelerometer nor gyroscope in use. Reduces chance of misinterpretation
by userspace.
kionix,sca3300
- Fix uninitialized holes in scan data exposed to userspace.
maxim,thermocouple
- Use a DMA-safe buffer for spi_read().
renesas,isl29501
- Fix ordering issue for big endian systems
renesas,rsg2l
- Fix an underflow issue around suspend/resume.
- Make sure driver data is in place before enabling runtime PM that uses
it.
rohm,bd79124
- Add missing GPIOLIB dependency. May rework in future to allow this to be
optional in future but for now this is the least invasive build fix.
-----BEGIN PGP SIGNATURE-----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=QGkA
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for 6.17
Usual mixed bunch of ancient issues and relatively new ones.
adi,ad7124
- Fix channel lookup to use chan->address for indexing array.
adi,ad7173
- Stop accidentally enabling more configs than supported at one time.
adi,ad7380
- Fill in missing max_conversion_rate_hz for adaq4381-4
ams,as73211
- Fix uninitialized holes in scan data exposed to userspace.
bosch,bmp280
- Check for error when requesting optional GPIO rather than simply assuming
success or a NULL return when no GPIO provided.
invensense,icm42600
- Change error code returned to -EBUSY on a temperature read with neither
accelerometer nor gyroscope in use. Reduces chance of misinterpretation
by userspace.
kionix,sca3300
- Fix uninitialized holes in scan data exposed to userspace.
maxim,thermocouple
- Use a DMA-safe buffer for spi_read().
renesas,isl29501
- Fix ordering issue for big endian systems
renesas,rsg2l
- Fix an underflow issue around suspend/resume.
- Make sure driver data is in place before enabling runtime PM that uses
it.
rohm,bd79124
- Add missing GPIOLIB dependency. May rework in future to allow this to be
optional in future but for now this is the least invasive build fix.
* tag 'iio-fixes-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()
iio: light: as73211: Ensure buffer holes are zeroed
iio: adc: rzg2l_adc: Set driver data before enabling runtime PM
iio: adc: rzg2l: Cleanup suspend/resume path
iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4
iio: adc: bd79124: Add GPIOLIB dependency
iio: imu: inv_icm42600: change invalid data error to -EBUSY
iio: adc: ad7124: fix channel lookup in syscalib functions
iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read()
iio: adc: ad7173: prevent scan if too many setups requested
iio: proximity: isl29501: fix buffered read on big-endian systems
iio: accel: sca3300: fix uninitialized iio scan data
Fix shellcheck warning such as
"Double quote to prevent globbing and word splitting." and
Use $(...) notation instead of legacy backticks `...`.
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250518044107.39928-4-maddy@linux.ibm.com
When compiling for pseries or powernv defconfig with "make C=1",
these warning were reported bu sparse tool in powerpc/kernel/kvm.c
arch/powerpc/kernel/kvm.c:635:9: warning: switch with no cases
arch/powerpc/kernel/kvm.c:646:9: warning: switch with no cases
Currently #ifdef were added after the switch case which are specific
for BOOKE and PPC_BOOK3S_32. These are not enabled in pseries/powernv
defconfig. Fix it by moving the #ifdef before switch(){}
Fixes: cbe487fac7 ("KVM: PPC: Add mtsrin PV code")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250518044107.39928-1-maddy@linux.ibm.com
There are two CONFIG_POWERPC64_CPU entries in the "CPU selection"
choice block.
I guess the intent is to display a different prompt depending on
CPU_LITTLE_ENDIAN: "Generic (POWER5 and PowerPC 970 and above)" for big
endian, and "Generic (POWER8 and above)" for little endian.
I stumbled on this tricky use case, and worked around it on Kconfig with
commit 4d46b5b623 ("kconfig: fix infinite loop in sym_calc_choice()").
However, I doubt that supporting multiple entries with the same symbol
in a choice block is worth the complexity - this is the only such case
in the kernel tree.
This commit merges the two entries. Once this cleanup is accepted in
the powerpc subsystem, I will proceed to refactor the Kconfig parser.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250607102005.1965409-1-masahiroy@kernel.org
The extra-y syntax is planned for deprecation because it is similar
to always-y.
When building the boot wrapper, always-y and extra-y are equivalent.
Use always-y instead.
In arch/powerpc/kernel/Makefile, I added ifdef KBUILD_BUILTIN to
keep the current behavior: prom_init_check is skipped when building
only modular objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250602163302.478765-1-masahiroy@kernel.org
Until commit 6c85f52b10 ("kvm/ppc: IRQ disabling cleanup"),
kvmppc_prepare_to_enter() was called with interrupts already disabled by
the caller, which was documented in the comment above the function.
Post-cleanup, the function is now called with interrupts enabled, and
disables interrupts itself.
Fix the comment to reflect the current behaviour.
Fixes: 6c85f52b10 ("kvm/ppc: IRQ disabling cleanup")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Gautam Menghani <gautam@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
[Fixed the double colon in Reviewed-by line]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250806055607.17081-1-ajd@linux.ibm.com
During the conversion to unify the calibration data management, the
reference to tasdevice_priv was wrongly set to h->hda_priv instead of
h->priv. This resulted in memory corruption and crashes eventually.
Unfortunately it's a void pointer, hence the compiler couldn't know
that it's wrong.
Fixes: 4fe2385134 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1248270
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250820051902.4523-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Parthiban Veerasooran says:
====================
Fixes on the Microchip's LAN865x driver
This patch series includes two bug fixes for the LAN865x Ethernet MAC-PHY
driver:
1. Fix missing transmit queue restart on device reopen
This patch addresses an issue where the transmit queue is not restarted
when the network interface is brought back up after being taken down
(e.g., via ip or ifconfig). As a result, packet transmission hangs
after the first down/up cycle. The fix ensures netif_start_queue() is
explicitly called in lan865x_net_open() to properly restart the queue
on every reopen.
2. Fix missing configuration in the Microchip LAN865x driver for silicon
revisions B0 and B1, as documented in Microchip Application Note AN1760
(Rev F, June 2024). These revisions require the MAC to be configured for
timestamping at the end of the Start of Frame Delimiter (SFD) and the
Timer Increment register to be set to 40 ns, corresponding to a 25 MHz
internal clock.
Both patches address issues introduced with the initial driver support and
are marked with the appropriate Fixes: tag.
====================
Link: https://patch.msgid.link/20250818060514.52795-1-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix missing configuration for LAN865x silicon revisions B0 and B1 as per
Microchip Application Note AN1760 (Rev F, June 2024).
The Timer Increment register was not being set, which is required for
accurate timestamping. As per the application note, configure the MAC to
set timestamping at the end of the Start of Frame Delimiter (SFD), and
set the Timer Increment register to 40 ns (corresponding to a 25 MHz
internal clock).
Link: https://www.microchip.com/en-us/application-notes/an1760
Fixes: 5cd2340cb6 ("microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY")
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250818060514.52795-3-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes an issue where the transmit queue is started implicitly only
the very first time the device is registered. When the device is taken
down and brought back up again (using `ip` or `ifconfig`), the transmit
queue is not restarted, causing packet transmission to hang.
Adding an explicit call to netif_start_queue() in lan865x_net_open()
ensures the transmit queue is properly started every time the device
is reopened.
Fixes: 5cd2340cb6 ("microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY")
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20250818060514.52795-2-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark Bloch says:
====================
mlx5 HWS fixes 2025-08-17
The following patch set focuses on hardware steering fixes
found by the team.
====================
Link: https://patch.msgid.link/20250817202323.308604-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Specifying the counter action is not enough, as it is used by multiple
counters that were allocated in a bulk. By omitting the offset, rules
will be associated with a different counter from the same bulk.
Subsequently, the CT subsystem checks the correct counter, assumes that
no traffic has triggered the rule, and ages out the rule. The end result
is intermittent offloading of long lived connections, as rules are aged
out then promptly re-added.
Fix this by specifying the correct offset along with the counter rule.
Fixes: 34eea5b12a ("net/mlx5e: CT: Add initial support for Hardware Steering")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250817202323.308604-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During table creation, caller passes a UID using ft_attr. The UID
value was ignored, which leads to problems when the caller sets the
UID to a non-zero value, such as SHARED_RESOURCE_UID (0xffff) - the
internal FT objects will be created with UID=0.
Fixes: 0869701cba ("net/mlx5: HWS, added FW commands handling")
Signed-off-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250817202323.308604-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If rule creation failed due to a full queue, due to timeout
in polling for completion, or due to matcher being in resize,
don't try to initiate rehash sequence - rehash would have
failed anyway.
Fixes: 2111bb970c ("net/mlx5: HWS, added backward-compatible API handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250817202323.308604-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While moving the rules during rehash, CQ is not drained. The flush
and drain happens only when all the rules of a certain queue have been
moved. This behaviour can lead to accumulating large quantity of rules
that haven't got their completion yet, and eventually will fill up
the queue and will cause the rehash to fail.
Fix this problem by requiring drain once the number of outstanding
completions reaches a certain threshold.
Fixes: ef94799a87 ("net/mlx5: HWS, rework rehash loop")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250817202323.308604-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
