scx_bpf_reenqueue_local() can be invoked from ops.cpu_release() to give
tasks that are queued to the local DSQ a chance to migrate to other
CPUs, when a CPU is taken by a higher scheduling class.
However, there is no point re-enqueuing tasks that can only run on that
particular CPU, as they would simply be re-added to the same local DSQ
without any benefit.
Therefore, skip per-CPU tasks in scx_bpf_reenqueue_local().
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
get_random_u32_below() has a better algorithm than bch2_rand_range(),
it just didn't exist at the time.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If devm_add_action_or_reset() isn't successful, xe_eu_stall_fini()
is invoked. So, unsuccessful return from devm_add_action_or_reset()
shouldn't dereference gt->eu_stall as xe_eu_stall_fini() already
frees it. Fix this issue.
Fixes: 9a0b11d4cf ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eae49a414a7314921108e0388810aaee6261ad92.1741800396.git.harish.chegondi@intel.com
crtc->mode is legacy junk and shouldn't really be used with
atomic drivers.
Most (all?) atomic drivers do end up still calling
drm_atomic_helper_update_legacy_modeset_state() at some
point, so crtc->mode does still get populated, and this
does work for now. But now that the modes[] lifetime issues
have been sorted out we can just switch over to the
proper crtc->state->mode.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
drm_client_firmware_config() is currently picking up the current
mode of the crtc via the legacy crtc->mode, which is not supposed
to be used by atomic drivers at all. We can't simply switch over
to the proper crtc->state->mode because we drop the crtc->mutex
(which protects crtc->state) before the mode gets used.
The most straightforward solution to extend the lifetime of
modes[] seem to be to make full copies of the modes.
And with this we can undo also commit 3eadd887db
("drm/client:Fully protect modes[] with dev->mode_config.mutex")
as the lifetime of modes[] no longer has anything to do with
that lock.
v2: Don't try to copy NULL modes
v3: Keep storing pointers and use drm_mode_{duplicate,destroy}()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the array notation rather that the pointer notation for
function arguments. This makes it clear to the reader that
we are in fact dealing with an array rather than a single
pointer. Functionally the two are equivalent.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228211454.8138-3-ville.syrjala@linux.intel.com
The modes used by the client code live on the connectors' mode
lists, which are not owned by the client code, and thus it has
no business modifying the modes. Mark the modes const to make
that fact abundantly clear.
v2: Fix up the kunit test
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303093847.7698-1-ville.syrjala@linux.intel.com
- Concurrent pci error and hotplug handling fix (Keith)
- Endpoint function fixes (Damien)
-----BEGIN PGP SIGNATURE-----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=rHqU
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.14-2025-03-13' of git://git.infradead.org/nvme into block-6.14
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.14
- Concurrent pci error and hotplug handling fix (Keith)
- Endpoint function fixes (Damien)"
* tag 'nvme-6.14-2025-03-13' of git://git.infradead.org/nvme:
nvmet: pci-epf: Do not add an IRQ vector if not needed
nvmet: pci-epf: Set NVMET_PCI_EPF_Q_LIVE when a queue is fully created
nvme-pci: fix stuck reset on concurrent DPC and HP
leds-st1202 requires the LED Pattern Trigger (LEDS_TRIGGER_PATTERN), which
is not selected when LED Trigger support is (LEDS_TRIGGERS).
To reproduce this:
- make menuconfig KCONFIG_CONFIG=
- select LEDS_ST1202 dependencies OF, I2C and LEDS_CLASS.
- select LEDS_ST1202
- LEDS_TRIGGERS is selected but LEDS_TRIGGER_PATTERN isn't.
The absence of LEDS_TRIGGER_PATTERN explicitly required can lead to builds
in which LEDS_ST1202 is selected while LEDS_TRIGGER_PATTERN isn't. The direct
result of that would be that /sys/class/leds/<led>/hw_pattern wouldn't be
available and there would be no way of interacting with the driver and
hardware from user space.
Add select LEDS_TRIGGER_PATTERN to Kconfig to meet the requirement and
indirectly document it as well.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB5473F4DF3A668F7DD057A280C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
Minor edits regarding use of spacing and proofreading.
There is a minor inconsistency in the use of spacing as margin in
one of the comments providing details about the datasheet.
There is also a typo that comes from the datasheet itself.
Change spacing on comment and correct typo.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB547333EFFFBFFA840225BC02C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
Arguably, there are more chances of errors occurring during the
initialization of the hardware, so this should complete successfully
before the devicetree node's children are initialized.
st1202_dt_init() fills the led_classdev struct.
st1202_setup() initializes the hardware. Specifically, resets the chip,
enables its phase-shift delay feature, enables the device and disables all
the LEDs channels. All that writing to registers, with no input from
st1202_dt_init().
Real-world testing corroborates that calling st1202_setup() before
st1202_dt_init() doesn't cause any issue during initialization.
Switch the order of st1202_dt_init() and st1202_setup() to ensure the
hardware is correctly initialized before the led_classdev struct is
filled.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB54731877A8DC54EDD33F0229C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
DSP on i.MX8MP doesn't have a direct reset line so according to hardware
design team in order to handle assert/deassert/reset functionality we
need to use a combination of control bits from two modules. Audio block
control module for Run/Stall control of the DSP and DAP module in order
to do software reset.
In a first step, for i.MX8MP we are switching on using the reset
controller API to handle the DSP Run/Stall bits i.MX8MP. This comes with
the advantage of offering a better probe ordering and a more natural way
of abstracting the Audio block control bits.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-9-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
We can Run/Stall the DSP via audio block control bits found in audiomix.
Implement this functionality using the reset controller and use assert
for Stall and deassert for Run.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-8-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
For EARC and EARC PHY the reset happens when clearing the reset bits.
Refactor assert/deassert function in order to take into account the
active_low configuration option.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20250311085812.1296243-7-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Current code supports EARC PHY Software Reset and EARC Software Reset
but it is not easily extensible to more reset bits.
So, refactor the code in order to easily allow more reset bits in the
future.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-6-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This adds IMX8MP_AUDIOMIX_ prefix to internal macros in order to show
that specific macros are related to audiomix.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20250311085812.1296243-5-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Assert and deassert functionality of the DSP found on i.MX8MP is
realized by combining control bits from two modules: Audio Block
Control and Debug Access Port.
Audio block control bits are used to Run/Stall the DSP core
while the DAP bits are used for software reset the core.
The original plan was to use fsl,dsp-ctrl property and to refer the
audiomix bits via syscon interface. This proposal received NACK from
community we shouldn't abuse the syscon interface [1].
So remove fsl,dsp-ctrl property for i.MX8MP and use reset control
interface instead.
Example dts node only uses runstall control now, but softreset will
be added in the future when we will convert the softreset functionality
to use reset controller API.
[1] https://patchwork.kernel.org/project/imx/patch/20250212085222.107102-6-daniel.baluta@nxp.com/
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-3-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add reset ids used for EARC and DSP on i.MX8MP platform.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250311085812.1296243-2-daniel.baluta@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Update stale lock info in comment of release_buffer_page.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250123155014.2097920-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename stale journal_clear_revoked_flag to jbd2_clear_buffer_revoked_flags.
Rename stale journal_switch_revoke to jbd2_journal_switch_revoke_table.
Rename stale __journal_file_buffer to __jbd2_journal_file_buffer.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250123155014.2097920-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 2d44292058 ("jbd2: remove CONFIG_JBD2_DEBUG to update
t_max_wait") removed jbd2_journal_enable_debug, just remove stale comment
about jbd2_journal_enable_debug.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250123155014.2097920-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unused return value of do_readahead.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250123155014.2097920-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unused return value of jbd2_journal_cancel_revoke.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250123155014.2097920-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Flag h_jdata is not used, just remove it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250123155014.2097920-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Update intel_bw.c internally use intel_display. Conversion of the public
interface will come as a follow-up.
v2:
- Prefer intel_uncore_read() for MCHBAR registers. (Ville)
v3:
- Remove the unnecessary inclusion of intel_de.h after changes from
v2. (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311-xe3lpd-bandwidth-update-v5-1-a95a9d90ad71@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Now, if dmesg is cleared, we have no way of knowing if the file system has
been shutdown. Moreover, ext4 allows directory reads even after the file
system has been shutdown, so when reading a file returns -EIO, we cannot
determine whether this is a hardware issue or if the file system has been
shutdown.
Therefore, when ext4 file system is shutdown, we're adding a 'shutdown'
hint to commands like mount so users can easily check the file system's
status.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122114130.229709-8-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit d3476f3dad ("ext4: don't set SB_RDONLY after filesystem
errors") in v6.12-rc1, the 'errors=remount-ro' mode no longer sets
SB_RDONLY on errors, which results in us seeing the filesystem is still
in rw state after errors.
Therefore, after setting EXT4_FLAGS_EMERGENCY_RO, display the emergency_ro
option so that users can query whether the current file system has become
emergency read-only due to errors through commands such as 'mount' or
'cat /proc/fs/ext4/sdx/options'.
Fixes: d3476f3dad ("ext4: don't set SB_RDONLY after filesystem errors")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122114130.229709-7-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
And after commit 95257987a6 ("ext4: drop EXT4_MF_FS_ABORTED flag") in
v6.6-rc1, the EXT4_FLAGS_SHUTDOWN bit is set in ext4_handle_error() under
errors=remount-ro mode. This causes the read to fail even when the error
is triggered in errors=remount-ro mode.
To correct the behavior under errors=remount-ro, EXT4_FLAGS_SHUTDOWN is
replaced by the newly introduced EXT4_FLAGS_EMERGENCY_RO. This new flag
only prevents writes, matching the previous behavior with SB_RDONLY.
Fixes: 95257987a6 ("ext4: drop EXT4_MF_FS_ABORTED flag")
Closes: https://lore.kernel.org/all/22d652f6-cb3c-43f5-b2fe-0a4bb6516a04@huawei.com/
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250122114130.229709-6-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some functions check sb_rdonly() to make sure the file system isn't
modified after it's read-only. Since we also don't want the file system
modified if it's in an emergency state (shutdown or emergency_ro),
we're adding additional ext4_emergency_state() checks where sb_rdonly()
is checked.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250122114130.229709-5-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since both SHUTDOWN and EMERGENCY_RO are emergency states of the ext4 file
system, and they are checked in similar locations, we have added a helper
function, ext4_emergency_state(), to determine whether the current file
system is in one of these two emergency states.
Then, replace calls to ext4_forced_shutdown() with ext4_emergency_state()
in those functions that could potentially trigger write operations.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122114130.229709-4-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT4_FLAGS_EMERGENCY_RO Indicates that the current file system has become
read-only due to some error. Compared to SB_RDONLY, setting it does not
require a lock because we won't clear it, which avoids over-coupling with
vfs freeze. Also, add a helper function ext4_emergency_ro() to check if
the bit is set.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122114130.229709-3-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Do away with the defines and use an enum as it's cleaner.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122114130.229709-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace "master" by "[host] controller" in the SPI core code and comments.
All the similar to the "slave" by "target [device]" changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250313140340.380359-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_DEBUG_SPINLOCK is not enabled (general case), there are four
4 bytes holes and one 2 bytes hole in struct ext4_inode_info. Move the
members to pack the four 4 bytes holes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122110533.4116662-10-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 378f32bab3 ("ext4: introduce direct I/O write using iomap
infrastructure"), no one cares about the value of i_unwritten, so there
is no need to maintain this variable, remove it, and clean up the
associated logic.
Suggested-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122110533.4116662-9-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We now print error messages in ext4_end_bio() when page writeback
encounters an error. If data_err=abort is set, the journal will also
be aborted in a kworker. This means that we now check all Buffer I/O
in all modes and decide whether to abort the journal based on the
data_err option. Therefore, we remove the ordered mode restriction
in the descriptions of data_err=abort and data_err=ignore.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250122110533.4116662-8-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since ext4's data_err=abort mode doesn't depend on
JBD2_ABORT_ON_SYNCDATA_ERR anymore, and nobody else uses it, we can
drop it and only warn in jbd2 as it used to be long ago.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122110533.4116662-7-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The data_err=abort was initially introduced to address users' worries
about data corruption spreading unnoticed. With direct writes, we can
rely on return values to confirm successful writes to disk. But with
buffered writes, a successful return only means the data has been written
to memory. Users have no way of knowing if the data has actually written
it to disk unless they use fsync (which impacts performance and can
sometimes miss errors).
The current data_err=abort implementation relies on the ordered data list,
but past changes have inadvertently altered its behavior. For example, if
an extent is unwritten, we do not add the inode to the ordered data list.
Therefore, jbd2 will not wait for the data write-back of that inode to
complete and check for errors in the inode mapping. Moreover, the checks
performed by jbd2 can also miss errors.
Now, all buffered writes eventually call ext4_end_bio(), where I/O errors
are checked. Therefore, we can check for the data_err=abort mode at this
point and abort the journal in a kworker (due to the interrupt context).
Therefore, when data_err=abort is enabled, the journal is aborted in
ext4_end_io_end() when an I/O error is detected in ext4_end_bio() to make
users who are concerned about the contents of the file happy.
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/c7ab26f3-85ad-4b31-b132-0afb0e07bf79@huawei.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250122110533.4116662-6-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
