Add support for AD5316R, AD5675 and AD5697R. These devices have different
bit resolutions or different number of channels so no fallback compatibles
are used.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Refactor device list in Kconfig, sorting devices by channel count. Also,
remove device description from file headers. One can rely on the ID
table(s) to check for supported devices. AD5337R is ommited as it does
not seem to exist, i.e. its documentation could not be found.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Populate of_match table with AD5673R/AD5677R entries, already supported by
the driver and available in the id_table.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add compatible entries for AD5673R and AD5677R. These 16-channel devices
have different bit resolutions so no fallback compatibles are used.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Since commit
55b48e23f5 ("genirq/devres: Add error handling in devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Since commit
55b48e23f5 ("genirq/devres: Add error handling in devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Standardize error check on if (ret) rather than if (ret < 0).
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Since commit
55b48e23f5 ("genirq/devres: Add error handling in devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Standardize error check on if (ret) rather than if (ret < 0)
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Since commit
55b48e23f5 ("genirq/devres: Add error handling in devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Since commit
55b48e23f5 ("genirq/devres: Add error handling in devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Standardize on if (ret) check rather than if (ret < 0).
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Declare the local variable as const char * and remove the unnecessary cast
when passing it to of_property_read_string().
Signed-off-by: Amin GATTOUT <amin.gattout@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Some sensors have multiple channels (not just brightness but color ALS
sensors) with different scaling factors.
Signed-off-by: Daniel Schaefer <dhs@frame.work>
Link: https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/merge_requests/413
Tested-by: Sven Vainküla <sven@xn--vainkla-r2a.ee> #Asus ProArt PX13 laptop.
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
kthread_run() can fail and return an error pointer, but sgp_probe() stores
it and returns success, so the device is registered without its IAQ thread
and sgp_remove() later passes the error pointer to kthread_stop(). Return
the error from probe instead.
Fixes: ce51412416 ("iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The QST QMC6308 is a 3-axis anisotropic magnetoresistive (AMR)
magnetometer on I2C, found e.g. in the Fairphone 6. Its register map
is not compatible with the QMC5883L's, so add a separate driver rather
than extending the QMC5883L driver.
Support raw X/Y/Z reads, output data rate, field range, filter
oversampling ratio, the mount matrix, and runtime PM.
Run measurements in the chip's periodic "normal" mode paced by the
DRDY flag rather than in its one-shot "single" mode: the datasheet
specifies no conversion time that could bound a one-shot wait, while
normal mode is paced by the specified output data rates, which also
keeps the sampling_frequency ABI meaningful.
Runtime PM puts the chip into its suspend mode after 500 ms without a
reading, dropping supply current to a few microamps. The suspended
chip retains its registers and keeps responding on I2C, so resuming
only rewrites the mode field and discards one stale sample, and
configuration changes apply even while suspended; VDD is left enabled
across runtime suspend.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add device tree bindings for the QST QMC6308, a 3-axis anisotropic
magnetoresistive (AMR) magnetometer. It is an I2C device with a single
supply and no interrupt pin, at I2C address 0x2c.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Change personal email to the Linux specific one,
to have a single and focused point of interaction.
Signed-off-by: Siratul Islam <siratul.islam@linux.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/linux-iio/a509d034-de90-4e46-bd7e-75f61002d6ba@kernel.org/
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Period measurement can be difficult when using high sampling
frequency where the jitter criteria is hard to meet because of the
system jitter.
This new version is using the delta time between 2 distant interrupts
to measure an interval of at least 20ms. 20ms is a good compromise
between the mitigation of system jitter and the delay to update
period. This way we decorrelate the period measurement from the
interrupt timestamps syncing using only the 2 last interrupts.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Current interrupt timestamp alignment only changes the final timestamp.
When the watermark is in use, we have a batch of samples for each
interrupt. The current code doesn't manage to align the timestamp
because the jitter is too high.
Instead modify the estimated inter interrupt period and use that to
adjust the timestamp alignment over the batch in a linear fashion.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Convert standard types (u)intXX_t to kernel type u/sXX.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
mpl115_probe() enables runtime PM when a shutdown GPIO is present and
then returns the result of devm_iio_device_register(). If registration
fails, runtime PM remains enabled and autosuspend remains selected.
The same unmanaged runtime PM state is also left behind on driver
unbind, as the IIO device registration is managed but the runtime PM
setup is not.
Use devm_pm_runtime_enable() so runtime PM is disabled automatically on
probe failure and driver unbind, and check pm_runtime_set_active() so
setup errors are reported.
Set the autosuspend parameters before enabling runtime PM. Once probe
has completed, the driver core queues an idle request for the device, so
an explicit pm_runtime_get_noresume()/pm_runtime_put() pair is not
needed to start autosuspend.
Fixes: 0c3a333524 ("iio: pressure: mpl115: Implementing low power mode by shutdown gpio")
Cc: stable@vger.kernel.org
Suggested-by: jonathan.cameron@oss.qualcomm.com
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add support for the AD4883, a dual-channel, 16-bit, 40 MSPS SAR ADC.
The AD4883 is the dual-channel variant of the AD4083, sharing the same
register map and SPI interface as the rest of the AD4080 family. Like
the AD4880, it uses two independent ADC channels, each with its own SPI
configuration interface.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add AD4883 compatible string to the AD4080 devicetree binding.
The AD4883 is a dual-channel, 16-bit, 40 MSPS SAR ADC, sharing the same
register map and interface as the AD4080 family. Like the AD4880, it
requires two SPI chip selects and two io-backends for its independent
ADC channels. The AD4883 differs from the AD4880 in resolution (16-bit
vs 20-bit), which requires distinct channel configuration in the driver,
precluding a fallback compatible.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Split the logic inside the opt3001_get_processed() function, as the
current flow is hard to read, mixing IRQ and non-IRQ code blocks.
Separate the IRQ code path into its own function, same for the
non-IRQ path.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Don't populate the read-only const array config on the stack at run
time, instead make it static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Don't populate the read-only const array regulator_names on the stack
at run time, instead make it static const char * const
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add the compatible for the SARADC of the Rockchip RV1106, which is
compatible with the RK3588 variant.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add debugfs register access to the ads112c14 driver. This is a complex
chip and being able to poke registers is useful for debugging and
diagnostic/calibration purposes.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add support for parsing devicetree properties for measurement channels
and doing direct reads on these.
There are quite a lot of conditions that have to be met for each
measurement to be made, so quite a bit of state and algorithms are
required to handle it.
Channels are created dynamically since the number of possibilities is
unreasonably large.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Implement support for the programmable gain amplifier on the internal
short SYS_MON channel. This channel is used for calibration, so it is
useful to be able to set the PGA to the same gain as the external
channels. The gain setting is implemented via the `_scale` attribute.
In the future, we may want to support different reference voltages for
this channel, so the scale_available table is populated during probe
rather than being a static table.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add a new driver for the TI ADS112C14/ADS122C14 ADC chips.
This first step is adding a very basic driver that only supports power
on/reset and reading the system monitor channels.
ADS112C14_SYS_MON_CHANNEL_SHORT is the last channel rather than being in
logical order by address to keep the voltage channels together and in
case we find we need to add variants of this channel with different
voltage reference later.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add new bindings for ti,ads112c14 and similar devices.
This is an ADC that is primarily intended for use with resistive sensors
(RTD, thermocouple, Wheatstone bridge, etc.). There are a few unusual
properties because of this. In particular, the reference voltage source
and current output requirements can be different for each measurement,
so these are included in the channel bindings.
The REFP/REFN reference voltage is usually just connected to a resistor
that is being driven by the ADC's current outputs, so there is special
property for this case rather than requiring a regulator to be defined
to represent that.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add a generic input-chopping property to adc.yaml. This is a feature
seen frequently in ADCs that are designed to measure resistive loads,
such as RTDs and strain gauges. Enabling this can reduce offset errors
by swapping the positive and negative input channels on every other
conversion. This can have side-effects in timing and filter response, so
it is not always desirable to enable this feature in some applications.
Therefore, it is best to make this a property that can be enabled or
disabled in the device tree.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Some ADCs incorporate burn-out current sources that provide current to
the channel's input pins for open-circuit or short-circuit detection.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Some ADCs incorporate current sources that provide excitation current to
resistive temperature devices (RTDs), thermistors, diodes and other
resistive sensors that require constant current biasing.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Some ADCs have configurable voltage reference sources for each channel.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Allow buffer blocks flagged as cyclic to be submitted as repeating DMA
transfers. For cyclic blocks, use DMA_PREP_REPEAT so the engine keeps
replaying the descriptor.
This is useful for output buffers where the same data should be driven
continuously without userspace having to requeue it. Examples include
continuous RF transmit paths replaying a calibration, test or beacon
pattern.
Skip installing the completion callback for cyclic blocks. Since the
transfer is continuously replayed, the callback would fire on every
period, throwing off the block refcount.
Because nothing prevents a new cyclic transfer from replacing an
already active cyclic one, always set DMA_PREP_LOAD_EOT so the engine
correctly terminates the active transfer before loading the new
descriptor.
Limit the DMA buffer queue to one cyclic DMABUF at a time. There is
currently no known use case for queueing multiple cyclic blocks, and
cyclic blocks stay referenced until the buffer is disabled.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Replace sprintf() with sysfs_emit() for single-value sysfs show
functions, and use sysfs_emit_at() for lux_table_show() which
concatenates multiple values. This ensures buffer safety and
follows the modern kernel sysfs API.
Signed-off-by: Chengrui Liu <OrangeBlack0765@outlook.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Most of the supported devices rely on a GAIN pin to control a 2x
multiplier applied to the output voltage. Other devices, e.g. the
single-channel ones, provides a gain control through a bit field in
the control register. Some designs might have the GAIN pin hardwired
to VDD/VLOGIC or GND, which would have no "gain-gpios" device property,
being able to set "adi,range-double" if it is hardwired to VDD. The
vref_mv field is moved down in the struct ad5686_state, so that the
overall size increase is reduced.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Implement trigger handler by leveraging the LDAC gpio to update all DAC
channels at once when it is available. Also, the multiple channel writes
can be flushed at once with the sync() operation.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Use guarded mutex lock to facilitate code review when adding new
attributes. This will allow for early returns, avoiding error-prone
locking and unlocking in error paths. This also adds missing include
linux/cleanup.h. Gain-control support will allow the scale attribute
to be configurable.
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Use of local SPI bus data to manage a collection of SPI transfers and
flush them to the SPI platform driver with the sync() operation. This
allows for faster handling of multiple channel DAC writes, avoiding kernel
overhead per spi_sync() call, which will be helpful when enabling
triggered buffer support. For consistency, the read operation leverages
the same transfer data rather than a stack-allocated array.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add sync() to operation to ad5686_bus_ops, which can be used to flush
multiple pending data transfers at once. This is going to be used when
implementing triggered buffer support.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
