mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,319,723 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dan Carpenter
|
cda88d2fef |
cifs: unlock on error in smb3_reconfigure()
Unlock before returning if smb3_sync_session_ctx_passwords() fails.
Fixes: 7e654ab7da03 ("cifs: during remount, make sure passwords are in sync")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
Shyam Prasad N
|
0f0e357902 |
cifs: during remount, make sure passwords are in sync
This fixes scenarios where remount can overwrite the only currently
working password, breaking reconnect.
We recently introduced a password2 field in both ses and ctx structs.
This was done so as to allow the client to rotate passwords for a mount
without any downtime. However, when the client transparently handles
password rotation, it can swap the values of the two password fields
in the ses struct, but not in smb3_fs_context struct that hangs off
cifs_sb. This can lead to a situation where a remount unintentionally
overwrites a working password in the ses struct.
In order to fix this, we first get the passwords in ctx struct
in-sync with ses struct, before replacing them with what the passwords
that could be passed as a part of remount.
Also, in order to avoid race condition between smb2_reconnect and
smb3_reconfigure, we make sure to lock session_mutex before changing
password and password2 fields of the ses structure.
Fixes:
|
||
Meetakshi Setiya
|
b9aef1b13a |
cifs: support mounting with alternate password to allow password rotation
Fixes the case for example where the password specified on mount is a recently expired password, but password2 is valid. Without this patch this mount scenario would fail. This patch introduces the following changes to support password rotation on mount: 1. If an existing session is not found and the new session setup results in EACCES, EKEYEXPIRED or EKEYREVOKED, swap password and password2 (if available), and retry the mount. 2. To match the new mount with an existing session, add conditions to check if a) password and password2 of the new mount and the existing session are the same, or b) password of the new mount is the same as the password2 of the existing session, and password2 of the new mount is the same as the password of the existing session. 3. If an existing session is found, but needs reconnect, retry the session setup after swapping password and password2 (if available), in case the previous attempt results in EACCES, EKEYEXPIRED or EKEYREVOKED. Cc: stable@vger.kernel.org Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
Paul Aurich
|
c353ee4fb1 |
smb: Initialize cfid->tcon before performing network ops
Avoid leaking a tcon ref when a lease break races with opening the
cached directory. Processing the leak break might take a reference to
the tcon in cached_dir_lease_break() and then fail to release the ref in
cached_dir_offload_close, since cfid->tcon is still NULL.
Fixes:
|
||
|
Paul Aurich
|
3fa640d035 |
smb: During unmount, ensure all cached dir instances drop their dentry
The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can
race with various cached directory operations, which ultimately results
in dentries not being dropped and these kernel BUGs:
BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
------------[ cut here ]------------
kernel BUG at fs/super.c:661!
This happens when a cfid is in the process of being cleaned up when, and
has been removed from the cfids->entries list, including:
- Receiving a lease break from the server
- Server reconnection triggers invalidate_all_cached_dirs(), which
removes all the cfids from the list
- The laundromat thread decides to expire an old cfid.
To solve these problems, dropping the dentry is done in queued work done
in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs()
flushes that workqueue after it drops all the dentries of which it's
aware. This is a global workqueue (rather than scoped to a mount), but
the queued work is minimal.
The final cleanup work for cleaning up a cfid is performed via work
queued in the serverclose_wq workqueue; this is done separate from
dropping the dentries so that close_all_cached_dirs() doesn't block on
any server operations.
Both of these queued works expect to invoked with a cfid reference and
a tcon reference to avoid those objects from being freed while the work
is ongoing.
While we're here, add proper locking to close_all_cached_dirs(), and
locking around the freeing of cfid->dentry.
Fixes:
|
||
Paulo Alcantara
|
796733054e |
smb: client: fix noisy message when mounting shares
When the client unconditionally attempts to get an DFS referral to check if share is DFS, some servers may return different errors that aren't handled in smb2_get_dfs_refer(), so the following will be logged in dmesg: CIFS: VFS: \\srv\IPC$ smb2_get_dfs_refer: ioctl error... which can confuse some users while mounting an SMB share. Fix this by logging such error with FYI. Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Paulo Alcantara
|
36008fe6e3 |
smb: client: don't try following DFS links in cifs_tree_connect()
We can't properly support chasing DFS links in cifs_tree_connect()
because
(1) We don't support creating new sessions while we're reconnecting,
which would be required for DFS interlinks.
(2) ->is_path_accessible() can't be called from cifs_tree_connect()
as it would deadlock with smb2_reconnect(). This is required for
checking if new DFS target is a nested DFS link.
By unconditionally trying to get an DFS referral from new DFS target
isn't correct because if the new DFS target (interlink) is an DFS
standalone namespace, then we would end up getting -ELOOP and then
potentially leaving tcon disconnected.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
||
|
Paulo Alcantara
|
e148107598 |
smb: client: allow reconnect when sending ioctl
cifs_tree_connect() no longer uses ioctl, so allow sessions to be reconnected when sending ioctls. Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Paulo Alcantara
|
b2fe4a8fa0 |
smb: client: get rid of @nlsc param in cifs_tree_connect()
We can access local_nls directly from @tcon->ses, so there is no need to pass it as parameter in cifs_tree_connect(). Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Paulo Alcantara
|
28ec614f2f |
smb: client: allow more DFS referrals to be cached
In some DFS setups, a single DFS share may contain hundreds of DFS links and increasing the DFS cache to allow more referrals to be cached improves DFS failover as the client will likely find a cached DFS referral when reconnecting and then avoiding unnecessary remounts. Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
Pali Rohár
|
f4ca4f5a36 |
cifs: Fix parsing reparse point with native symlink in SMB1 non-UNICODE session
SMB1 NT_TRANSACT_IOCTL/FSCTL_GET_REPARSE_POINT even in non-UNICODE mode
returns reparse buffer in UNICODE/UTF-16 format.
This is because FSCTL_GET_REPARSE_POINT is NT-based IOCTL which does not
distinguish between 8-bit non-UNICODE and 16-bit UNICODE modes and its path
buffers are always encoded in UTF-16.
This change fixes reading of native symlinks in SMB1 when UNICODE session
is not active.
Fixes:
|
||
|
Pali Rohár
|
1f48660667 |
cifs: Validate content of WSL reparse point buffers
WSL socket, fifo, char and block devices have empty reparse buffer. Validate the length of the reparse buffer. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Pali Rohár
|
d3d797e326 |
cifs: Improve guard for excluding $LXDEV xattr
$LXDEV xattr is for storing block/char device's major and minor number. Change guard which excludes storing $LXDEV xattr to explicitly filter everything except block and char device. Current guard is opposite, which is currently correct but is less-safe. This change is required for adding support for creating WSL-style symlinks as symlinks also do not use device's major and minor numbers. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Pali Rohár
|
06a7adf318 |
cifs: Add support for parsing WSL-style symlinks
Linux CIFS client currently does not implement readlink() for WSL-style symlinks. It is only able to detect that file is of WSL-style symlink, but is not able to read target symlink location. Add this missing functionality and implement support for parsing content of WSL-style symlink. The important note is that symlink target location stored for WSL symlink reparse point (IO_REPARSE_TAG_LX_SYMLINK) is in UTF-8 encoding instead of UTF-16 (which is used in whole SMB protocol and also in all other symlink styles). So for proper locale/cp support it is needed to do conversion from UTF-8 to local_nls. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Pali Rohár
|
dd26bc067e |
cifs: Validate content of native symlink
Check that path buffer has correct length (it is non-zero and in UNICODE mode it has even number of bytes) and check that buffer does not contain null character (UTF-16 null codepoint in UNICODE mode or null byte in non-unicode mode) because Linux cannot process symlink with null byte. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Pali Rohár
|
723f4ef904 |
cifs: Fix parsing native symlinks relative to the export
SMB symlink which has SYMLINK_FLAG_RELATIVE set is relative (as opposite of the absolute) and it can be relative either to the current directory (where is the symlink stored) or relative to the top level export path. To what it is relative depends on the first character of the symlink target path. If the first character is path separator then symlink is relative to the export, otherwise to the current directory. Linux (and generally POSIX systems) supports only symlink paths relative to the current directory where is symlink stored. Currently if Linux SMB client reads relative SMB symlink with first character as path separator (slash), it let as is. Which means that Linux interpret it as absolute symlink pointing from the root (/). But this location is different than the top level directory of SMB export (unless SMB export was mounted to the root) and thefore SMB symlinks relative to the export are interpreted wrongly by Linux SMB client. Fix this problem. As Linux does not have equivalent of the path relative to the top of the mount point, convert such symlink target path relative to the current directory. Do this by prepending "../" pattern N times before the SMB target path, where N is the number of path separators found in SMB symlink path. So for example, if SMB share is mounted to Linux path /mnt/share/, symlink is stored in file /mnt/share/test/folder1/symlink (so SMB symlink path is test\folder1\symlink) and SMB symlink target points to \test\folder2\file, then convert symlink target path to Linux path ../../test/folder2/file. Deduplicate code for parsing SMB symlinks in native form from functions smb2_parse_symlink_response() and parse_reparse_native_symlink() into new function smb2_parse_native_symlink() and pass into this new function a new full_path parameter from callers, which specify SMB full path where is symlink stored. This change fixes resolving of the native Windows symlinks relative to the top level directory of the SMB share. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Paulo Alcantara
|
4bdec0d1f6 |
smb: client: fix NULL ptr deref in crypto_aead_setkey()
Neither SMB3.0 or SMB3.02 supports encryption negotiate context, so when SMB2_GLOBAL_CAP_ENCRYPTION flag is set in the negotiate response, the client uses AES-128-CCM as the default cipher. See MS-SMB2 3.3.5.4. Commit |
||
Marco Crivellari
|
ab02d87741 |
Update misleading comment in cifs_chan_update_iface
Since commit
|
||
Henrique Carvalho
|
07bdf9272a |
smb: client: change return value in open_cached_dir_by_dentry() if !cfids
Change return value from -ENOENT to -EOPNOTSUPP to maintain consistency with the return value of open_cached_dir() for the same case. This change is safe as the only calling function does not differentiate between these return values. Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Henrique Carvalho
|
ceaf145199 |
smb: client: disable directory caching when dir_cache_timeout is zero
Setting dir_cache_timeout to zero should disable the caching of
directory contents. Currently, even when dir_cache_timeout is zero,
some caching related functions are still invoked, which is unintended
behavior.
Fix the issue by setting tcon->nohandlecache to true when
dir_cache_timeout is zero, ensuring that directory handle caching
is properly disabled.
Fixes:
|
||
|
Henrique Carvalho
|
f6e8883840 |
smb: client: remove unnecessary checks in open_cached_dir()
Checks inside open_cached_dir() can be removed because if dir caching is disabled then tcon->cfids is necessarily NULL. Therefore, all other checks are redundant. Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
Linus Torvalds
|
228a1157fb |
15 smb3 client fixes, most also for stable
-----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmdA/W0ACgkQiiy9cAdy T1HN6Av/ai3dqbNO0d9IrmM7JONITa6CYqBA+DC2zyv7LtNmSOVGAeP+LyEuM0rE jHbQBNSRVhoNKCv5ywT6GhjMNnDeO0ctZG2aXoQnGfCFdZ5dE/08r8Cc24xQW+x5 cdLbBGR22HBi4MjqqWALL2goL9TpLYo9ht31P1xmiM1pw3/pbh2lsEDLVMS/veeG RQ1pIg5YpWcWQWAnuwI6RDxGHF2taj7tcm8gZ1mYRUlaPHmsCHeNg6lgHdDXLFKw 0HA4dx8AeH2rdMWgwP42UVIVoxG/H//xPpLym+A8yV+11EJcurjYkskhEsSUxeWq vzsf0xFxN2MhjwI5DYfr5kIQknjS3qCTOofRsJi6s5GhxJy2hl0Wfto0AJs6+Fl4 /sukKWjWSgrkcpILLokDUZptYEBH7pUNcBVpfcQOScnUeV4qQk8oko3bTKDSfgTq q3zrh2mPanTOpM6UgcBRfywR4r5tAKzoQOUfJpQuItLvLhgrgAm+WGCWFepztJlT LPEGTxrG =K4Ai -----END PGP SIGNATURE----- Merge tag '6.13-rc-part1-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull smb client updates from Steve French: - Fix two SMB3.1.1 POSIX Extensions problems - Fixes for special file handling (symlinks and FIFOs) - Improve compounding - Four cleanup patches - Fix use after free in signing - Add support for handling namespaces for reconnect related upcalls (e.g. for DNS names resolution and auth) - Fix various directory lease problems (directory entry caching), including some important potential use after frees * tag '6.13-rc-part1-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: prevent use-after-free due to open_cached_dir error paths smb: Don't leak cfid when reconnect races with open_cached_dir smb: client: handle max length for SMB symlinks smb: client: get rid of bounds check in SMB2_ioctl_init() smb: client: improve compound padding in encryption smb3: request handle caching when caching directories cifs: Recognize SFU char/block devices created by Windows NFS server on Windows Server <<2012 CIFS: New mount option for cifs.upcall namespace resolution smb/client: Prevent error pointer dereference fs/smb/client: implement chmod() for SMB3 POSIX Extensions smb: cached directories can be more than root file handle smb: client: fix use-after-free of signing key smb: client: Use str_yes_no() helper function smb: client: memcpy() with surrounding object base address cifs: Remove pre-historic unused CIFSSMBCopy |
||
|
Linus Torvalds
|
e7675238b9 |
overlayfs updates for 6.13
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE9zuTYTs0RXF+Ke33EVvVyTe/1WoFAmc90jsACgkQEVvVyTe/ 1Wol0A//RhzFCG8geR7Grbptp40CUm9kVISvkr50mPBdvVk3jX9WvH9m/10qapGP tcGHSdHt+q5qabqutKLmQRiFbwpGEaBMaFOe7JH8na8xWvmSa3p7sJC5kLByS3rm D2F+cVx3Di7MTscz/Ma724bHdHOUO5RbDuMIcjp7uXRvaNWJ0uZg5xWlBKsNa3h8 DbNSYi5ICihLYpUxI9NglHZ6iqcS2jHsUHSAw52/GJ2Zon1LAAmKoSn6s7hZ27ZJ f8Rv5fFuYmkRV7nYo/gjLY1gt7KXZFcfUtMT05yd7zcnqDayKEFXEiwI/Bz5fXZL HmZpOP4RV2M9B8HzhReVR/yG8gZaaUezX+aVQp7plZSc73GhMdFFd1bUyjgJ4Lzf C2BlBMWafc/Zc7a7r0+X5577i34nED8lGuVMEdYMtjSjstpzIP+1Wlzn2cGi4+5K VAb+kEravjP9ck7YrmbruRYfVhDaE37BDs4XML4S8gzcZgdaTcEMyGw1ifEhvPjA vLbRs24a5VO7/cKlks7PWS6i9uExaz7g4re0jUPwUuc+nS+Hv+y8kLSPqLS4CtNY MxhS2IhKK5gp1Z9XGpLsak+ancTYLSV0OJ15qsAChpqoqSG5Xd9Lt4CWACnF33Ea ny8z5QpOAHWVb97k6xaEvu/r0dl+PHdG7vfb0MNhXaajNF8SKiU= =pgoX -----END PGP SIGNATURE----- Merge tag 'ovl-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs Pull overlayfs updates from Amir Goldstein: - Fix a syzbot reported NULL pointer deref with bfs lower layers - Fix a copy up failure of large file from lower fuse fs - Followup cleanup of backing_file API from Miklos - Introduction and use of revert/override_creds_light() helpers, that were suggested by Christian as a mitigation to cache line bouncing and false sharing of fields in overlayfs creator_cred long lived struct cred copy. - Store up to two backing file references (upper and lower) in an ovl_file container instead of storing a single backing file in file->private_data. This is used to avoid the practice of opening a short lived backing file for the duration of some file operations and to avoid the specialized use of FDPUT_FPUT in such occasions, that was getting in the way of Al's fd_file() conversions. * tag 'ovl-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: Filter invalid inodes with missing lookup function ovl: convert ovl_real_fdget() callers to ovl_real_file() ovl: convert ovl_real_fdget_path() callers to ovl_real_file_path() ovl: store upper real file in ovl_file struct ovl: allocate a container struct ovl_file for ovl private context ovl: do not open non-data lower file for fsync ovl: Optimize override/revert creds ovl: pass an explicit reference of creators creds to callers ovl: use wrapper ovl_revert_creds() fs/backing-file: Convert to revert/override_creds_light() cred: Add a light version of override/revert_creds() backing-file: clean up the API ovl: properly handle large files in ovl_security_fileattr |
||
|
Linus Torvalds
|
060fc106b6 |
unicode updates
This update includes: - A patch by Thomas Weißschuh constifying a read-only struct. - A patch by André Almeida fixing the error path of unicode_load, which might trigger a kernel oops if it fails to find the unicode module. - One documentation fix by Gan Jie, updating a filename in the README. - A patch by André Almeida adding the link of my tree to MAINTAINERS. All but the MAINTAINERS patch have been sitting on my tree and in linux-next since early in the 6.12 cycle. Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQS3XO7QfvpFoONBhH1OwQgI3t8RJgUCZ0D4JwAKCRBOwQgI3t8R JmjZAP988O9eB4ITF6KHKsHyY3pOhxSRXU5jpr78v7ofDDuGwAD/UBJZyF35wgJz S2q295kCAEP8bUKxj6RJtyMyQnamQg8= =irw2 -----END PGP SIGNATURE----- Merge tag 'unicode-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode Pull unicode updates from Gabriel Krisman Bertazi: - constify a read-only struct (Thomas Weißschuh) - fix the error path of unicode_load, avoiding a possible kernel oops if it fails to find the unicode module (André Almeida) - documentation fix, updating a filename in the README (Gan Jie) - add the link of my tree to MAINTAINERS (André Almeida) * tag 'unicode-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode: MAINTAINERS: Add Unicode tree unicode: change the reference of database file unicode: Fix utf8_load() error path unicode: constify utf8 data table |
||
|
Linus Torvalds
|
980f8f8fd4 |
Summary
* sysctl ctl_table constification
Constifying ctl_table structs prevents the modification of proc_handler
function pointers. All ctl_table struct arguments are const qualified in the
sysctl API in such a way that the ctl_table arrays being defined elsewhere
and passed through sysctl can be constified one-by-one. We kick the
constification off by qualifying user_table in kernel/ucount.c and expect all
the ctl_tables to be constified in the coming releases.
* Misc fixes
Adjust comments in two places to better reflect the code. Remove superfluous
dput calls. Remove Luis from sysctl maintainership. Replace comments about
holding a lock with calls to lockdep_assert_held.
* Testing
All these went through 0-day and they have all been in linux-next for at
least 1 month (since Oct-24). I also rand these through the sysctl selftest
for x86_64.
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEErkcJVyXmMSXOyyeQupfNUreWQU8FAmdAXMsACgkQupfNUreW
QU/KfQv8Daq9sew98ohmS/lkdoE1dfpI72motzEn1993CbLjN2h3CZauaHjBPFnr
rpr8qPrphdWTyDbDMgx63oxcNxM07g7a9H0y/K3IwdUsx7fGINgHF5kfWeVn09ov
X8I3NuL/+xSHAZRsLQeBykbY6BD5e0uuxL6ayGzkejrgRd+80dmC3MzXqX207v1z
rlrUFXEXwqKYgxP/H+pxmvmVWKAeFsQt/E49GOkg2qSg9mVFhtKpxHwMJVqS2a8u
qAKHgcZhB5T8TQSb1eKnyCzXLDLpzqUBj9ejqJSsQm16fweawv221Ji6a1k53QYG
chreoB9R8qCZ/jGoWI3ZKGRZ/Vl37l+GF/82X/sDrMbKwVlxvaERpb1KXrnh/D1v
qNze1Eea0eYv22weGGEa3J5N2tKfgX6NcRFioDNe9VEXX6zDcAtJKTKZtbMB3gXX
CzQicH5yXApyAk3aNCq0S3s+WRQR0syGAYCmtxhaRgXRnSu9qifKZ1XhZQyhgKIG
Flt9MsU2
=bOJ0
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
"sysctl ctl_table constification:
- Constifying ctl_table structs prevents the modification of
proc_handler function pointers. All ctl_table struct arguments are
const qualified in the sysctl API in such a way that the ctl_table
arrays being defined elsewhere and passed through sysctl can be
constified one-by-one.
We kick the constification off by qualifying user_table in
kernel/ucount.c and expect all the ctl_tables to be constified in
the coming releases.
Misc fixes:
- Adjust comments in two places to better reflect the code
- Remove superfluous dput calls
- Remove Luis from sysctl maintainership
- Replace comments about holding a lock with calls to
lockdep_assert_held"
* tag 'sysctl-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Reduce dput(child) calls in proc_sys_fill_cache()
sysctl: Reorganize kerneldoc parameter names
ucounts: constify sysctl table user_table
sysctl: update comments to new registration APIs
MAINTAINERS: remove me from sysctl
sysctl: Convert locking comments to lockdep assertions
const_structs.checkpatch: add ctl_table
sysctl: make internal ctl_tables const
sysctl: allow registration of const struct ctl_table
sysctl: move internal interfaces to const struct ctl_table
bpf: Constify ctl_table argument of filter function
|
||
|
Linus Torvalds
|
2a163a4cea |
RDMA v6.13 merge window pull request
Seveal fixes scattered across the drivers and a few new features:
- Minor updates and bug fixes to hfi1, efa, iopob, bnxt, hns
- Force disassociate the userspace FD when hns does an async reset
- bnxt new features for optimized modify QP to skip certain stayes, CQ
coalescing, better debug dumping
- mlx5 new data placement ordering feature
- Faster destruction of mlx5 devx HW objects
- Improvements to RDMA CM mad handling
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZz4ENwAKCRCFwuHvBreF
YQYQAP9R54r5J1Iylg+zqhCc+e/9oveuuZbfLvy/EJiEpmdprQEAgPs1RrB0z7U6
1xrVStUKNPhGd5XeVVZGkIV0zYv6Tw4=
=V5xI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Seveal fixes scattered across the drivers and a few new features:
- Minor updates and bug fixes to hfi1, efa, iopob, bnxt, hns
- Force disassociate the userspace FD when hns does an async reset
- bnxt new features for optimized modify QP to skip certain stayes,
CQ coalescing, better debug dumping
- mlx5 new data placement ordering feature
- Faster destruction of mlx5 devx HW objects
- Improvements to RDMA CM mad handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (51 commits)
RDMA/bnxt_re: Correct the sequence of device suspend
RDMA/bnxt_re: Use the default mode of congestion control
RDMA/bnxt_re: Support different traffic class
IB/cm: Rework sending DREQ when destroying a cm_id
IB/cm: Do not hold reference on cm_id unless needed
IB/cm: Explicitly mark if a response MAD is a retransmission
RDMA/mlx5: Move events notifier registration to be after device registration
RDMA/bnxt_re: Cache MSIx info to a local structure
RDMA/bnxt_re: Refurbish CQ to NQ hash calculation
RDMA/bnxt_re: Refactor NQ allocation
RDMA/bnxt_re: Fail probe early when not enough MSI-x vectors are reserved
RDMA/hns: Fix different dgids mapping to the same dip_idx
RDMA/bnxt_re: Add set_func_resources support for P5/P7 adapters
RDMA/bnxt_re: Enhance RoCE SRIOV resource configuration design
bnxt_en: Add support for RoCE sriov configuration
RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg()
RDMA/hns: Fix out-of-order issue of requester when setting FENCE
RDMA/nldev: Add IB device and net device rename events
RDMA/mlx5: Add implementation for ufile_hw_cleanup device operation
RDMA/core: Move ib_uverbs_file struct to uverbs_types.h
...
|
||
|
Linus Torvalds
|
ceba6f6f33 |
IOMMU Updates for Linux v6.13:
Including:
- Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function.
- Introduce iommu_paging_domain_alloc_flags().
- Extend support for allocating PASID-capable domains to more
drivers.
- Remove iommu_present().
- Some smaller improvements.
- New IOMMU driver for RISC-V.
- Intel VT-d Updates:
- Add domain_alloc_paging support.
- Enable user space IOPFs in non-PASID and non-svm cases.
- Small code refactoring and cleanups.
- Add domain replacement support for pasid.
- AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default.
- Replace custom domain ID allocator with IDA allocator.
- Add ops->release_domain() support.
- Other improvements to device attach and domain allocation code
paths.
- ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their SMMU.
- Devicetree binding updates for Qualcomm MMU-500 implementations.
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue driver.
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage.
- Remove unused block-splitting support.
- S390 IOMMU:
- Implement support for blocking domain.
- Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186.
- OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver.
-----BEGIN PGP SIGNATURE-----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=V9hb
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function
- Introduce iommu_paging_domain_alloc_flags()
- Extend support for allocating PASID-capable domains to more drivers
- Remove iommu_present()
- Some smaller improvements
New IOMMU driver for RISC-V
Intel VT-d Updates:
- Add domain_alloc_paging support
- Enable user space IOPFs in non-PASID and non-svm cases
- Small code refactoring and cleanups
- Add domain replacement support for pasid
AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default
- Replace custom domain ID allocator with IDA allocator
- Add ops->release_domain() support
- Other improvements to device attach and domain allocation code
paths
ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their
SMMU
- Devicetree binding updates for Qualcomm MMU-500 implementations
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue
driver
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage
- Remove unused block-splitting support
S390 IOMMU:
- Implement support for blocking domain
Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186
OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver"
* tag 'iommu-updates-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (92 commits)
iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift
iommu: Make set_dev_pasid op support domain replacement
iommu/arm-smmu-v3: Make set_dev_pasid() op support replace
iommu/vt-d: Add set_dev_pasid callback for nested domain
iommu/vt-d: Make identity_domain_set_dev_pasid() to handle domain replacement
iommu/vt-d: Make intel_svm_set_dev_pasid() support domain replacement
iommu/vt-d: Limit intel_iommu_set_dev_pasid() for paging domain
iommu/vt-d: Make intel_iommu_set_dev_pasid() to handle domain replacement
iommu/vt-d: Add iommu_domain_did() to get did
iommu/vt-d: Consolidate the struct dev_pasid_info add/remove
iommu/vt-d: Add pasid replace helpers
iommu/vt-d: Refactor the pasid setup helpers
iommu/vt-d: Add a helper to flush cache for updating present pasid entry
iommu: Pass old domain to set_dev_pasid op
iommu/iova: Fix typo 'adderss'
iommu: Add a kdoc to iommu_unmap()
iommu/io-pgtable-arm-v7s: Remove split on unmap behavior
iommu/io-pgtable-arm: Remove split on unmap behavior
iommu/vt-d: Drain PRQs when domain removed from RID
iommu/vt-d: Drop pasid requirement for prq initialization
...
|
||
|
Linus Torvalds
|
eb78332b10 |
More thermal control updates for 6.13-rc1
- Add SAR2130P compatible to DT bindings in the QCom Tsens driver (Dmitry
Baryshkov).
- Add static annotation to arrays describing platform sensors in the
LVTS Mediatek driver (Colin Ian King).
- Switch back to struct platform_driver::remove() from the previous
callbacks prototype rework (Uwe Kleine-König).
- Add MSM8937 compatible to DT bindings and its support in the QCom
Tsens driver (Barnabás Czémán).
- Remove a pointless sign test on an unsigned value in k3_bgp_read_temp()
in the k3_j72xx_bandgap driver (Rex Nie).
- Fix a pointer reference loss when realloc() fails in the thermal
library (Zhang Jiao).
-----BEGIN PGP SIGNATURE-----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=cXi4
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These update a few thermal drivers used on ARM platforms and thermal
tools:
- Add SAR2130P compatible to DT bindings in the QCom Tsens driver
(Dmitry Baryshkov)
- Add static annotation to arrays describing platform sensors in the
LVTS Mediatek driver (Colin Ian King)
- Switch back to struct platform_driver::remove() from the previous
callbacks prototype rework (Uwe Kleine-König)
- Add MSM8937 compatible to DT bindings and its support in the QCom
Tsens driver (Barnabás Czémán)
- Remove a pointless sign test on an unsigned value in
k3_bgp_read_temp() in the k3_j72xx_bandgap driver (Rex Nie)
- Fix a pointer reference loss when realloc() fails in the thermal
library (Zhang Jiao)"
* tag 'thermal-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/thermal: Fix common realloc mistake
thermal/drivers/k3_j72xx_bandgap: Simplify code in k3_bgp_read_temp()
thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens
dt-bindings: thermal: tsens: Add MSM8937
thermal: Switch back to struct platform_driver::remove()
thermal/drivers/mediatek/lvts_thermal: Make read-only arrays static const
dt-bindings: thermal: qcom-tsens: Add SAR2130P compatible
|
||
|
Linus Torvalds
|
6f9baa9b92 |
More power management updates for 6.13-rc1
- Add virtual cpufreq driver for guest kernels (David Dai).
- Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
Can).
- Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" (Colin
Ian King).
- Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
Dybcio, and Nikunj Kela).
- Make cpuidle_play_dead() try all idle states with :enter_dead()
callbacks and change their return type to void (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=aB0d
-----END PGP SIGNATURE-----
Merge tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These mostly are updates of cpufreq drivers used on ARM platforms plus
one new DT-based cpufreq driver for virtualized guests and two cpuidle
changes that should not make any difference on systems currently in
the field, but will be needed for future development:
- Add virtual cpufreq driver for guest kernels (David Dai)
- Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
Can)
- Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
(Colin Ian King)
- Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
Dybcio, and Nikunj Kela)
- Make cpuidle_play_dead() try all idle states with :enter_dead()
callbacks and change their return type to void (Rafael Wysocki)"
* tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
cpuidle: Change :enter_dead() driver callback return type to void
cpuidle: Do not return from cpuidle_play_dead() on callback failures
arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible
cpufreq: sun50i: add a100 cpufreq support
cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power()
cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power()
cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost()
cpufreq: loongson3: Check for error code from devm_mutex_init() call
cpufreq: scmi: Fix cleanup path when boost enablement fails
cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()
cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()
Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible
cpufreq: add virtual-cpufreq driver
dt-bindings: cpufreq: add virtual cpufreq device
cpufreq: loongson2: Unregister platform_driver on failure
cpufreq: ti-cpufreq: Remove revision offsets in AM62 family
cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon
cppc_cpufreq: Remove HiSilicon CPPC workaround
...
|
||
|
Linus Torvalds
|
619d996c86 |
Hi,
This pull request has only some minor tweaks. BR, Jarkko -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZz+7VQAKCRAaerohdGur 0up2AQCVWdhQq3JdGyU6CHEz28ZrcFCR5Mlwr6XHhtXeDb/jlAEA1CjVtSFho2ir bfaTfirN7RWEFdZyDpzqwROYu03rfwg= =cm2z -----END PGP SIGNATURE----- Merge tag 'tpmdd-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull TPM updates from Jarkko Sakkinen: "Only some minor tweaks" * tag 'tpmdd-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: atmel: Drop PPC64 specific MMIO setup char: tpm: cr50: Add new device/vendor ID 0x50666666 char: tpm: cr50: Move i2c locking to request/relinquish locality ops char: tpm: cr50: Use generic request/relinquish locality ops tpm: ibmvtpm: Set TPM_OPS_AUTO_STARTUP flag on driver |
||
|
Linus Torvalds
|
d0c9a21c8e |
MTD device changes: Aside from the platform_driver::remove() switch, two
misc issues got fixed.
SPI-NAND changes:
A load of fixes to Winbond manufacturer driver have been done, plus a
structure constification.
Raw NAND changes:
The GPMI driver has been improved on the power management side.
The Davinci driver has been cleaned up.
A leak in the Atmel driver plus some typos in the core have been fixed.
SPI NOR changes:
Introduce byte swap support for 8D-8D-8D mode and a user for it:
macronix. SPI NOR flashes may swap the bytes on a 16-bit boundary when
configured in Octal DTR mode. For such cases the byte order is
propagated through SPI MEM to the SPI controllers so that the
controllers swap the bytes back at runtime. This avoids breaking the
boot sequence because of the endianness problems that appear when the
bootloaders use 1-1-1 and the kernel uses 8D-8D-8D with byte swap
support. Along with the SPI MEM byte swap support we queue a patch for
the SPI MXIC controller that swaps the bytes back at runtime.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmc/WusACgkQJWrqGEe9
VoR0Zgf/admMDFN51dtkz950bnOkZfot/4uLgUQCDenhbugHrom7KWQ6+oh1+HSN
9EAjLoLNQzq4vxKx1WoI/99iJO86zg/DiyVD3nQidv9JkqHRDp2t13ZLclr4gGyW
Kh1lDQ+9GwpB8CQQnxVaPL39NjjqR3RiEfEP/1fVgGYQvCt4yedhVsDT3WThJeVb
1n7l54RBpZji88mT0chFB9CoSLnzrYZFh2MvzJaW/i1v02yZLXHFxFiKiKo+WysY
FGQTY3x0j20H2Ib8RSP7ECegvNb1HtfIxAPsTIqDBGbrA+ahvBr0J/XxX3NbV3RT
Ee4rXqL257zH9dC9Rr1LJAZCqiyx7w==
=p+y9
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD device changes:
- switch platform_driver back to remove()
- misc fixes
SPI-NAND changes:
- a load of fixes to Winbond manufacturer driver
- structure constification
Raw NAND changes:
- improve the power management of the GPMI driver
- Davinci driver clean-ups
- fix leak in the Atmel driver
- fix some typos in the core
SPI NOR changes:
- Introduce byte swap support for 8D-8D-8D mode and a user for it:
macronix.
SPI NOR flashes may swap the bytes on a 16-bit boundary when
configured in Octal DTR mode. For such cases the byte order is
propagated through SPI MEM to the SPI controllers so that the
controllers swap the bytes back at runtime. This avoids breaking
the boot sequence because of the endianness problems that appear
when the bootloaders use 1-1-1 and the kernel uses 8D-8D-8D with
byte swap support. Along with the SPI MEM byte swap support we
queue a patch for the SPI MXIC controller that swaps the bytes back
at runtime"
* tag 'mtd/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (25 commits)
mtd: spi-nor: core: replace dummy buswidth from addr to data
mtd: spi-nor: winbond: add "w/ and w/o SFDP" comment
mtd: spi-nor: spansion: Use nor->addr_nbytes in octal DTR mode in RD_ANY_REG_OP
mtd: Switch back to struct platform_driver::remove()
mtd: cfi_cmdset_0002: remove redundant assignment to variable ret
mtd: spinand: Constify struct nand_ecc_engine_ops
MAINTAINERS: add mailing list for GPMI NAND driver
mtd: spinand: winbond: Sort the devices
mtd: spinand: winbond: Ignore the last ID characters
mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information
mtd: spinand: winbond: Fix 512GW and 02JW OOB layout
mtd: nand: raw: gpmi: improve power management handling
mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS
mtd: rawnand: davinci: use generic device property helpers
mtd: rawnand: davinci: break the line correctly
mtd: rawnand: davinci: order headers alphabetically
mtd: rawnand: atmel: Fix possible memory leak
mtd: rawnand: Correct multiple typos in comments
mtd: hyperbus: rpc-if: Add missing MODULE_DEVICE_TABLE
mtd: spi-nor: add support for Macronix Octal flash
...
|
||
|
Linus Torvalds
|
9f3a2ba62c |
The core framework gained a clk provider helper, a clk consumer helper, and
some unit tests for the assigned clk rates feature in DeviceTree. On the vendor
driver side, we gained a whole pile of SoC driver support detailed below. The
majority in the diffstat is Qualcomm, but there's also quite a few Samsung and
Mediatek clk driver additions in here as well. The top vendors is quite common,
but the sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm SAR2130P
- Global, camera, display, GPU, and video clock controllers for Qualcomm
SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support for the
Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and reset on
Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus
-----BEGIN PGP SIGNATURE-----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=FqLm
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework gained a clk provider helper, a clk consumer
helper, and some unit tests for the assigned clk rates feature in
DeviceTree. On the vendor driver side, we gained a whole pile of SoC
driver support detailed below. The majority in the diffstat is
Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
additions in here as well. The top vendors is quite common, but the
sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P
SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
SAR2130P
- Global, camera, display, GPU, and video clock controllers for
Qualcomm SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support
for the Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
reset on Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various
binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
dt-bindings: clock: axi-clkgen: include AXI clk
clk: mmp: Add Marvell PXA1908 MPMU driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APBC driver
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Switch to use struct u32_fract instead of custom one
...
|
||
|
Linus Torvalds
|
2fb7eb3d7e |
- Improved handling of LCD power states and interactions with the fbdev subsystem.
- Introduced new LCD_POWER_ constants to decouple the LCD subsystem from fbdev. - Several drivers were updated to use the new LCD_POWER_ constants. - Clarified the semantics of the lcd_ops.controls_device callback. - Removed unnecessary includes and dependencies. - Removed unused notifier functionality. - Simplified code with scoped for-each loops. - Fixed module autoloading for the ktz8866 driver. - Updated device tree bindings to yaml format. - Minor cleanups and improvements in various drivers. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmc/KTkACgkQUa+KL4f8 d2HzWA//QtnboEtMOOt5hlY/MyGnwDG2nWWwbnlEVQ1zN3lQut4WWOocuyqIu6Wr tfRyLKOsiAWdjFi7NBQlV3ylNyyD4XU9/qNduOAMPe3VGj/lZB70coH+RL4L4JvX cSiue8vF9StX7gB7qxh1uVBastlCu9ofVZV4dFMD4hX+hA3SgBX5itmOfue9AMkm LXdA1DeDvigH5DMPIStHuQS0HVOxv06TJd1syzVBesa8G3raTwluTc16uPJkIwHd MnDqdvevaiW1ZnE3+8o2CmkLfFsB27iltwutXn9MbrUKBz0S7/ruNTib+RguFOaP Eo+ls0KIaiPH4xi0FuHlSiXKwszIvZ3GGeu3fO66k9m+vM2/IesBGgf0GR3Y8Lxr fwl4iNkLguKsBnLHBxhDnrQ3ltQiBw4q8Q2m/zQ4OoaW/sMX+514D3jOZmx3snE1 ODE22bhoznRLyEAHisv4wA9snoAyvEItejczGC7HLJ0SbWUGBbqzHgvhjwMkh6R6 0+6dJ22DTlSwZsyXcSkzA85ayiuxFLhwvD0nfxyGwUD//swg8L7ymnpVLOqpdJcc EgdVQeuaTij0UH9NutMDoIC1Z0SUMvpli1Wk0/Y1Hmg0vICZUUjewcli6VEbZGFu PKkkAeTPJaxfYWW64VHk6flSaW67VjqfiQ01F4oLlRwONcihpxM= =9n4l -----END PGP SIGNATURE----- Merge tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: - Improve handling of LCD power states and interactions with the fbdev subsystem - Introduce new LCD_POWER_ constants to decouple the LCD subsystem from fbdev - Update several drivers to use the new LCD_POWER_ constants - Clarify the semantics of the lcd_ops.controls_device callback - Remove unnecessary includes and dependencies - Remove unused notifier functionality - Simplify code with scoped for-each loops - Fix module autoloading for the ktz8866 driver - Update device tree bindings to yaml format - Minor cleanups and improvements in various drivers * tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (33 commits) MAINTAINERS: Use Daniel Thompson's korg address for Backlight work dt-bindings: backlight: Convert zii,rave-sp-backlight.txt to yaml backlight: Remove notifier backlight: ktz8866: Fix module autoloading backlight: 88pm860x_bl: Simplify with scoped for each OF child loop backlight: lcd: Do not include <linux/fb.h> in lcd header backlight: lcd: Remove struct fb_videomode from set_mode callback backlight: lcd: Replace check_fb with controls_device HID: picoLCD: Replace check_fb in favor of struct fb_info.lcd_dev fbdev: omap: Use lcd power constants fbdev: imxfb: Use lcd power constants fbdev: imxfb: Replace check_fb in favor of struct fb_info.lcd_dev fbdev: clps711x-fb: Use lcd power constants fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev backlight: tdo24m: Use lcd power constants backlight: platform_lcd: Use lcd power constants backlight: platform_lcd: Remove match_fb from struct plat_lcd_data backlight: platform_lcd: Remove include statement for <linux/backlight.h> backlight: otm3225a: Use lcd power constants backlight: ltv350qv: Use lcd power constants ... |
||
|
Linus Torvalds
|
93251bdf7a |
- Removed unused local header files from various drivers.
- Reverted platform driver removal to the original method for consistency. - Introduced ordered workqueues for LED events, replacing the less efficient system_wq. - Switched to a safer iteration macro in several drivers to prevent potential memory leaks. - Fixed a refcounting bug in the mt6360 flash LED driver. - Fixed an uninitialized variable in the mt6370_mc_pattern_clear() function. - Resolved Smatch warnings in the leds-bcm6328 driver. - Addressed a potential NULL pointer dereference in the brightness_show() function. - Fixed an incorrect format specifier in the ss4200 driver. - Prevented a resource leak in the max5970 driver's probe function. - Added support for specifying the number of serial shift bits in the device tree for the BCM63138 family. - Implemented multicolor brightness control in the lp5562 driver. - Added a device tree property to override the default LED pin polarity. - Added a property to specify the default brightness value when the LED is initially on. - Set missing timing properties for the ktd2692 driver. - Documented the "rc-feedback" trigger for controlling LEDs based on remote control activity. - Converted text bindings to YAML for the pca955x driver to enable device tree validation. - Removed redundant checks for invalid channel numbers in the lp55xx driver. - Updated the MAINTAINERS file with current contact information. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmc/KSgACgkQUa+KL4f8 d2HvLRAAsTuxvq89Ooe5eVWTY39fADykEx8sLgKTJWBs+A4EkD6a6DZAU0QQKZeX o7ERtasl5E0WFXF2BaVYPWNDjcSFlqG3AB5PbQLpzUUEkllJWEaWz5ZthpTMct5n Q/ylbTA8dYS+bw3bztTKWRWX8RMXKSHdjymJoSuoFLY7T1MLqNHZbu+whNKfC++h UMMXyx2M9B+3/0cDghy1EvCWkBTVOL9GzhQhAc+guQTCA8VeK+7LilnCtDOwymdO lScTM87S5gD6n22tcDFHhHH+qXVG8LfNpRRKiZdv6BmFJwHpXD+nAMReJOmyReDp jepy1aX/W/1cw/GMzd/nOMx/8u8rbO5Up9euCS/jFvgSpn9bKYIlMy2CVsAznOGN elt/kCD3nIxY8pzMTnvxCEVYj+hfbCKQWq51cm6G5hhQbfVw72fwiVIGTy8fadO3 kLOiWM3EKvtpjbdMl0BzWVOIPLO0gQOeYH7ZYb7TM0g3mtFo47DhoGHYQCiaGgko Bpb+4fcXpeFLTutM5HGvqqfOCnl/uk4Gf3KhdECSmjFb3L0JbWE/JN3CMq+AR7oK FcOhYhNVEGu7VILQYScmChz/DzJT267lyLKF7y1jkmz5ZKMD2r+8XZ2xEb5ks6PG +gU7lMY2OXWs/lB9rGTRfCkS50DFJfNG2F5oN7fZ5UJLMWL1EY8= =qZhx -----END PGP SIGNATURE----- Merge tag 'leds-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds PULL LED updates from Lee Jones: - Remove unused local header files from various drivers - Revert platform driver removal to the original method for consistency - Introduce ordered workqueues for LED events, replacing the less efficient system_wq - Switch to a safer iteration macro in several drivers to prevent potential memory leaks - Fix a refcounting bug in the mt6360 flash LED driver - Fix an uninitialized variable in the mt6370_mc_pattern_clear() function - Resolve Smatch warnings in the leds-bcm6328 driver - Address a potential NULL pointer dereference in the brightness_show() function - Fix an incorrect format specifier in the ss4200 driver - Prevent a resource leak in the max5970 driver's probe function - Add support for specifying the number of serial shift bits in the device tree for the BCM63138 family - Implement multicolor brightness control in the lp5562 driver - Add a device tree property to override the default LED pin polarity - Add a property to specify the default brightness value when the LED is initially on - Set missing timing properties for the ktd2692 driver - Document the "rc-feedback" trigger for controlling LEDs based on remote control activity - Convert text bindings to YAML for the pca955x driver to enable device tree validation - Remove redundant checks for invalid channel numbers in the lp55xx driver - Update the MAINTAINERS file with current contact information * tag 'leds-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (46 commits) leds: ss4200: Fix the wrong format specifier for 'blinking' leds: pwm: Add optional DT property default-brightness dt-bindings: leds: pwm: Add default-brightness property leds: class: Protect brightness_show() with led_cdev->led_access mutex leds: ktd2692: Set missing timing properties leds: max5970: Fix unreleased fwnode_handle in probe function leds: Introduce ordered workqueue for LEDs events instead of system_wq MAINTAINERS: Replace Siemens IPC related bouncing maintainers leds: bcm6328: Replace divide condition with comparison for shift value leds: lp55xx: Remove redundant test for invalid channel number dt-bindings: leds: pca955x: Convert text bindings to YAML leds: rgb: leds-mt6370-rgb: Fix uninitialized variable 'ret' in mt6370_mc_pattern_clear leds: lp5562: Add multicolor brightness control dt-bindings: leds: Add 'active-high' property leds: Switch back to struct platform_driver::remove() leds: bcm63138: Add some register defines leds: bcm63138: Handle shift register config leds: bcm63138: Use scopes and guards dt-bindings: leds: bcm63138: Add shift register bits leds: leds-gpio-register: Reorganize kerneldoc parameter names ... |
||
|
Linus Torvalds
|
80739fd00c |
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance consistency and fix race conditions. - The syscon driver now utilizes the regmap max_register_is_0 capability for consistent register map configuration across syscons of all sizes. - New device support has been added for QCS8300, qcs615, SA8255p, and samsung,s2dos05, expanding the range of compatible hardware. - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs and avoids loading the charger with UCSI, streamlining functionality. - The bd96801 driver now utilizes the more modern maple tree register cache, improving performance. - The da9052-spi driver has undergone a fix to change the read-mask to write-mask, preventing potential issues. - Unused declarations in max77693 have been removed, and support for samsung,s2dos05 has been added, enhancing code clarity and device compatibility. - Error handling in cs42l43 has been fixed to avoid unbalanced regulator put and ensure proper synchronization during driver removal. - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(), improving code consistency. - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated and reorganized for better clarity and maintainability. - The intel_soc_pmic_bxtwc driver has undergone significant improvements, including the use of IRQ domains for various devices, fixing IRQ domain names duplication, and code refactoring for better consistency and maintainability. - The ipaq-micro driver has received a fix for a missing break statement in the default case, enhancing code robustness. - Support for the AXP323 PMIC has been added to the axp20x driver, along with ensuring a clear relationship between IDs and model names, and allowing multiple regulators, broadening hardware compatibility. - The cs42l43 driver now disables IRQs during suspend for improved power management. - The adp5585 driver has reduced its dependencies by dropping the obsolete dependency on COMPILE_TEST. - Initial support for the MT6328 PMIC has been added to the mt6397 driver, expanding the range of supported hardware. - The rtc-bd70528 driver has been simplified by dropping the IC name from IRQ, improving code readability. - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been updated to enhance clarity and incorporate new features. - The rt5033 driver has received a fix for a missing regmap_del_irq_chip() in the error handling path. - New device support has been added for MSM8917, and the intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client. - The 88pm886 driver has added support for the RTC cell, and the tqmx86 driver has improved its GPIO IRQ setup and added I2C IRQ support, increasing functionality. - The sprd,sc2731 DT schema has been updated and converted to YAML format for better readability and maintainability. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmc/KQQACgkQUa+KL4f8 d2E0Gg//blIYrtUgGy5xEwR8WIobYtAxBo+AMX1tSgh4Hs4u/SFhy4cE7no+M3J2 Id5gQJscuz3k4sH0raoUMp2NRFyI8lD8Y9xRBTDE+KV/FbdL1KHfmTun2NY1zG7U LIop39HsJkJ0Z06lnyBf61QK6SmlzT8vXbJmK4mYf8wgBX7iFDZ0FMZHP2uW5k/Z UV8nyQalwerG+jOGXfQkVDXF8YKToqPtqsFWTJ1Yn5gs1SCd6dyusDNYqUDuW4Ng dbu/4wt3mspliTOnBTPnXlcVsCNefhtbCWxyBpaA3luK9ciMdX7cZ8wei1xkFcwK 5bXPjXsFiiUbDX0l/6eS1h676k1JQl5iABlhGXHJm/GMcN9fdNFCQL/2rtJ4iSfW 0CoYjERfm6OyHF0Wiuk3I8x/AARWKXtDEjktGXUL0do7NBqJgB3ISme8x8b5hW4l HO6MmsFmHxHbIlb+kCTTCtXa5R1Sdca/8qrPxMb+B89X3eOtF7sjVgS9dwkLNCGp hqP0K2IGNaRw+EDlXCBaWrbq7x0kpup6o+nooViU0Pj9fFjEdZlCLyu22+kjl04V Lfe3x9wMXBrHVrPynoaQp6+57QlWfpM0uuKJWoaKlCoJTh8UbFcWWkDqr6I/pDur EtfSwOO8uVuS8m/FMAs0m/+zrWfHAvjAbAHFCKBu/vKaD5DvxeI= =YP3r -----END PGP SIGNATURE----- Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and tps65010, have undergone minor code improvements to enhance consistency and fix race conditions. - The syscon driver now utilizes the regmap max_register_is_0 capability for consistent register map configuration across syscons of all sizes. - New device support has been added for QCS8300, qcs615, SA8255p, and samsung,s2dos05, expanding the range of compatible hardware. - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs and avoids loading the charger with UCSI, streamlining functionality. - The bd96801 driver now utilizes the more modern maple tree register cache, improving performance. - The da9052-spi driver has undergone a fix to change the read-mask to write-mask, preventing potential issues. - Unused declarations in max77693 have been removed, and support for samsung,s2dos05 has been added, enhancing code clarity and device compatibility. - Error handling in cs42l43 has been fixed to avoid unbalanced regulator put and ensure proper synchronization during driver removal. - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(), improving code consistency. - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated and reorganized for better clarity and maintainability. - The intel_soc_pmic_bxtwc driver has undergone significant improvements, including the use of IRQ domains for various devices, fixing IRQ domain names duplication, and code refactoring for better consistency and maintainability. - The ipaq-micro driver has received a fix for a missing break statement in the default case, enhancing code robustness. - Support for the AXP323 PMIC has been added to the axp20x driver, along with ensuring a clear relationship between IDs and model names, and allowing multiple regulators, broadening hardware compatibility. - The cs42l43 driver now disables IRQs during suspend for improved power management. - The adp5585 driver has reduced its dependencies by dropping the obsolete dependency on COMPILE_TEST. - Initial support for the MT6328 PMIC has been added to the mt6397 driver, expanding the range of supported hardware. - The rtc-bd70528 driver has been simplified by dropping the IC name from IRQ, improving code readability. - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been updated to enhance clarity and incorporate new features. - The rt5033 driver has received a fix for a missing regmap_del_irq_chip() in the error handling path. - New device support has been added for MSM8917, and the intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client. - The 88pm886 driver has added support for the RTC cell, and the tqmx86 driver has improved its GPIO IRQ setup and added I2C IRQ support, increasing functionality. - The sprd,sc2731 DT schema has been updated and converted to YAML format for better readability and maintainability. * tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits) dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm dt-bindings: mfd: sprd,sc2731: Convert to YAML mfd: tqmx86: Add I2C IRQ support mfd: tqmx86: Make IRQ setup errors non-fatal mfd: tqmx86: Refactor GPIO IRQ setup mfd: tqmx86: Improve gpio_irq module parameter description mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S mfd: 88pm886: Add the RTC cell dt-bindings: mfd: Add Realtek RTL9300 switch peripherals mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client mfd: intel_soc_pmic_*: Consistently use filename as driver name dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917 mfd: rt5033: Fix missing regmap_del_irq_chip() mfd: cgbc-core: Fix error handling paths in cgbc_init_device() dt-bindings: mfd: aspeed: Support for AST2700 mfd: Switch back to struct platform_driver::remove() dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750 mfd: rtc: bd7xxxx Drop IC name from IRQ mfd: mt6397: Add initial support for MT6328 mfd: adp5585: Drop obsolete dependency on COMPILE_TEST ... |
||
|
Linus Torvalds
|
e288c352a4 |
linux_kselftest-kunit-6.13-rc1-fixed
kunit update for Linux 6.13-rc1
-- fixes user-after-free (UAF) bug in kunit_init_suite()
-- adds option to kunit tool to print just the summary of test results
-- adds option to kunit tool to print just the failed test results
-- fixes kunit_zalloc_skb() to use user passed in gfp value instead of
hardcoding GFP_KERNEL
-- fixes kunit_zalloc_skb() kernel doc to include allocation flags variable
-- updates KUnit email address for Brendan Higgins
-- adds LoongArch config to qemu_configs
-- changes tool to allow overriding the shutdown mode from qemu config
-- enables shutdown in loongarch qemu_config
-- fixes potential null dereference in kunit_device_driver_test()
-- fixes debugfs to use IS_ERR() for alloc_string_stream() error check
-----BEGIN PGP SIGNATURE-----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=gRq+
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.13-rc1-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- fix user-after-free (UAF) bug in kunit_init_suite()
- add option to kunit tool to print just the summary of test results
- add option to kunit tool to print just the failed test results
- fix kunit_zalloc_skb() to use user passed in gfp value instead of
hardcoding GFP_KERNEL
- fixe kunit_zalloc_skb() kernel doc to include allocation flags
variable
- update KUnit email address for Brendan Higgins
- add LoongArch config to qemu_configs
- allow overriding the shutdown mode from qemu config
- enable shutdown in loongarch qemu_config
- fix potential null dereference in kunit_device_driver_test()
- fix debugfs to use IS_ERR() for alloc_string_stream() error check
* tag 'linux_kselftest-kunit-6.13-rc1-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: qemu_configs: loongarch: Enable shutdown
kunit: tool: Allow overriding the shutdown mode from qemu config
kunit: qemu_configs: Add LoongArch config
kunit: debugfs: Use IS_ERR() for alloc_string_stream() error check
kunit: Fix potential null dereference in kunit_device_driver_test()
MAINTAINERS: Update KUnit email address for Brendan Higgins
kunit: string-stream: Fix a UAF bug in kunit_init_suite()
kunit: tool: print failed tests only
kunit: tool: Only print the summary
kunit: skb: add gfp to kernel doc for kunit_zalloc_skb()
kunit: skb: use "gfp" variable instead of hardcoding GFP_KERNEL
|
||
|
Linus Torvalds
|
06afb0f361 |
tracing updates for v6.13:
- Addition of faultable tracepoints
There's a tracepoint attached to both a system call entry and exit. This
location is known to allow page faults. The tracepoints are called under
an rcu_read_lock() which does not allow faults that can sleep. This limits
the ability of tracepoint handlers to page fault in user space system call
parameters. Now these tracepoints have been made "faultable", allowing the
callbacks to fault in user space parameters and record them.
Note, only the infrastructure has been implemented. The consumers (perf,
ftrace, BPF) now need to have their code modified to allow faults.
- Fix up of BPF code for the tracepoint faultable logic
- Update tracepoints to use the new static branch API
- Remove trace_*_rcuidle() variants and the SRCU protection they used
- Remove unused TRACE_EVENT_FL_FILTERED logic
- Replace strncpy() with strscpy() and memcpy()
- Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr()
- Fix perf events to not duplicate samples when tracing is enabled
- Replace atomic64_add_return(1, counter) with atomic64_inc_return(counter)
- Make stack trace buffer 4K instead of PAGE_SIZE
- Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used
- Get the true return address for function tracer when function graph tracer
is also running.
When function_graph trace is running along with function tracer,
the parent function of the function tracer sometimes is
"return_to_handler", which is the function graph trampoline to record
the exit of the function. Use existing logic that calls into the
fgraph infrastructure to find the real return address.
- Remove (un)regfunc pointers out of tracepoint structure
- Added last minute bug fix for setting pending modules in stack function
filter.
echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
Would cause a kernel NULL dereference.
- Minor clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZz6dehQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlQsAP9aB0XGUV3UykvjZuKK84VDZ26a2hZH
X2JDYsNA4luuPAEAz/BG2rnslfMZ04WTMAl8h1eh10lxcuHG0wQMHVBXIwI=
=lzb5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Addition of faultable tracepoints
There's a tracepoint attached to both a system call entry and exit.
This location is known to allow page faults. The tracepoints are
called under an rcu_read_lock() which does not allow faults that can
sleep. This limits the ability of tracepoint handlers to page fault
in user space system call parameters. Now these tracepoints have been
made "faultable", allowing the callbacks to fault in user space
parameters and record them.
Note, only the infrastructure has been implemented. The consumers
(perf, ftrace, BPF) now need to have their code modified to allow
faults.
- Fix up of BPF code for the tracepoint faultable logic
- Update tracepoints to use the new static branch API
- Remove trace_*_rcuidle() variants and the SRCU protection they used
- Remove unused TRACE_EVENT_FL_FILTERED logic
- Replace strncpy() with strscpy() and memcpy()
- Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr()
- Fix perf events to not duplicate samples when tracing is enabled
- Replace atomic64_add_return(1, counter) with
atomic64_inc_return(counter)
- Make stack trace buffer 4K instead of PAGE_SIZE
- Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used
- Get the true return address for function tracer when function graph
tracer is also running.
When function_graph trace is running along with function tracer, the
parent function of the function tracer sometimes is
"return_to_handler", which is the function graph trampoline to record
the exit of the function. Use existing logic that calls into the
fgraph infrastructure to find the real return address.
- Remove (un)regfunc pointers out of tracepoint structure
- Added last minute bug fix for setting pending modules in stack
function filter.
echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
Would cause a kernel NULL dereference.
- Minor clean ups
* tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
ftrace: Fix regression with module command in stack_trace_filter
tracing: Fix function name for trampoline
ftrace: Get the true parent ip for function tracer
tracing: Remove redundant check on field->field in histograms
bpf: ensure RCU Tasks Trace GP for sleepable raw tracepoint BPF links
bpf: decouple BPF link/attach hook and BPF program sleepable semantics
bpf: put bpf_link's program when link is safe to be deallocated
tracing: Replace strncpy() with strscpy() when copying comm
tracing: Add might_fault() check in __DECLARE_TRACE_SYSCALL
tracing: Fix syscall tracepoint use-after-free
tracing: Introduce tracepoint_is_faultable()
tracing: Introduce tracepoint extended structure
tracing: Remove TRACE_FLAG_IRQS_NOSUPPORT
tracing: Replace multiple deprecated strncpy with memcpy
tracing: Make percpu stack trace buffer invariant to PAGE_SIZE
tracing: Use atomic64_inc_return() in trace_clock_counter()
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
tracing/bpf: Add might_fault check to syscall probes
tracing/perf: Add might_fault check to syscall probes
tracing/ftrace: Add might_fault check to syscall probes
...
|
||
|
Linus Torvalds
|
4b01712311 |
tracing/tools: Updates for 6.13
- Add ':' to getopt option 'trace-buffer-size' in timerlat_hist for consistency - Remove unused sched_getattr define - Rename sched_setattr() helper to syscall_sched_setattr() to avoid conflicts - Update counters to long from int to avoid overflow - Add libcpupower dependency detection - Add --deepest-idle-state to timerlat to limit deep idle sleeps - Other minor clean ups and documentation changes -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZz5O/hQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qkLlAQDAJ0MASrdbJRDrLrfmKX6sja582MLe 3MvevdSkOeXRdQEA0tzm46KOb5/aYNotzpntQVkTjuZiPBHSgn1JzASiaAI= =OZ1w -----END PGP SIGNATURE----- Merge tag 'trace-tools-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing tools updates from Steven Rostedt: - Add ':' to getopt option 'trace-buffer-size' in timerlat_hist for consistency - Remove unused sched_getattr define - Rename sched_setattr() helper to syscall_sched_setattr() to avoid conflicts - Update counters to long from int to avoid overflow - Add libcpupower dependency detection - Add --deepest-idle-state to timerlat to limit deep idle sleeps - Other minor clean ups and documentation changes * tag 'trace-tools-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: verification/dot2: Improve dot parser robustness tools/rtla: Improve exception handling in timerlat_load.py tools/rtla: Enhance argument parsing in timerlat_load.py tools/rtla: Improve code readability in timerlat_load.py rtla/timerlat: Do not set params->user_workload with -U rtla: Documentation: Mention --deepest-idle-state rtla/timerlat: Add --deepest-idle-state for hist rtla/timerlat: Add --deepest-idle-state for top rtla/utils: Add idle state disabling via libcpupower rtla: Add optional dependency on libcpupower tools/build: Add libcpupower dependency detection rtla/timerlat: Make timerlat_hist_cpu->*_count unsigned long long rtla/timerlat: Make timerlat_top_cpu->*_count unsigned long long tools/rtla: fix collision with glibc sched_attr/sched_set_attr tools/rtla: drop __NR_sched_getattr rtla: Fix consistency in getopt_long for timerlat_hist rv: Fix a typo tools/rv: Correct the grammatical errors in the comments tools/rv: Correct the grammatical errors in the comments rtla: use the definition for stdout fd when calling isatty() |
||
|
Linus Torvalds
|
f1db825805 |
trace ring-buffer updates for v6.13
- Limit time interrupts are disabled in rb_check_pages() The rb_check_pages() is called after the ring buffer size is updated to make sure that the ring buffer has not been corrupted. Commit |
||
|
Linus Torvalds
|
be4202228e |
- Add new infrastructure for reading TDX metadata
- Use the newly-available metadata to:
- Disable potentially nasty #VE exceptions
- Get more complete CPU topology information from the VMM
-----BEGIN PGP SIGNATURE-----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=NIl1
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull tdx updates from Dave Hansen:
"These essentially refine some interactions between TDX guests and
VMMs.
The first leverages a new TDX module feature to runtime disable the
ability for a VM to inject #VE exceptions. Before this feature, there
was only a static on/off switch and the guest had to panic if it was
configured in a bad state.
The second lets the guest opt in to be able to access the topology
CPUID leaves. Before this, accesses to those leaves would #VE.
For both of these, it would have been nicest to just change the
default behavior, but some pesky "other" OSes evidently need to retain
the legacy behavior.
Summary:
- Add new infrastructure for reading TDX metadata
- Use the newly-available metadata to:
- Disable potentially nasty #VE exceptions
- Get more complete CPU topology information from the VMM"
* tag 'x86_tdx_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Enable CPU topology enumeration
x86/tdx: Dynamically disable SEPT violations from causing #VEs
x86/tdx: Rename tdx_parse_tdinfo() to tdx_setup()
x86/tdx: Introduce wrappers to read and write TD metadata
|
||
|
Linus Torvalds
|
5af5d43f84 |
- Rework some CPU setup code to keep LLVM happy on 32-bit
- Correct RSB terminology in Kconfig text -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmc9OLoACgkQaDWVMHDJ krDIwA/5AcBevnfyIzDdMMnUJMFt5ppTqkzDVevdPh9d2Q07DxsHWzX9KCyKm1e3 +E4FNfzg3JMJ3PmYnHLlhX78g5pYgDzmGVftfU5AmlQLeqZamgZKreyhEBIYZNkd CsgmZRBx2SmMfsThwAF+EFbi2Lysqgt1PceGNawVYjNQiv1qS7p091V0q3gqOTAf rr/LfiPfPe3nfGTW1CFqDPI9u8fsa87nelykp8/E0ZbOpIEecOAke8SkpjCpSORP zthUH4/UzUPuVTKiBztfM9HATqTWuRaGGyklFszFHHwLd/XZhsIKNQ/ptpl0qHIr d8f6LIrBPG/4Nyovjk6AYfs3NSc22tZngRbkN6DbaYtx7Io1lUJItd/ZIIuYVBs8 MQgdmNkf6XU3WzkcCY7sT5WdXFOB95wi6TFdv33xRGmTovbothT5uJJHivotuOvZ lH9ym7WQANZ0ggvSh5Y4bzk6OyUE74POZ332c4c+F6nXlG9NkSEzWUVyaJMQ6yMD bPkdlxEZGF17xAm5VXT9qFmH6IClZL4j7G+Jh3GjvdGm3FO/pp1w5AkC8G7otQ7x b1TFBMeS7xkVvOPAMzwzezU8DsXT/jJGleSuLNN7YI5rzDCAw6/TyJjlWVOW1khr mV6xuhjb8P1ku5L+/nI5ghxQcgM8+HxN10/Gg4HQsXmsk17vtKk= =02xm -----END PGP SIGNATURE----- Merge tag 'x86_misc_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 updates from Dave Hansen: "As usual for this branch, these are super random: a compile fix for some newish LLVM checks and making sure a Kconfig text reference to 'RSB' matches the normal definition: - Rework some CPU setup code to keep LLVM happy on 32-bit - Correct RSB terminology in Kconfig text" * tag 'x86_misc_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Make sure flag_is_changeable_p() is always being used x86/bugs: Correct RSB terminology in Kconfig |
||
|
Linus Torvalds
|
be9318cd5a |
- Use vmalloc_array() instead of vmalloc()
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmc9NkQACgkQaDWVMHDJ krCs8g//dtj6LVV+RqAh62Xg3lwIJX3aGfjCJ3sZR22l8sE63FIdHKulmXVOtwUi b7APij265sYJwsPQQyD+3TXaR2oDM5SJ3ms/JAi0NiJ80sH7Vl8+wpk4KdKDoFNr CvK4cHpjfn05KuMCDT0pOmJui+aiOdMTdrrIvZhJY7C1hHTKrSS4Vvte2MweuQWf p40FvF3PIH3fHoB1jiXsgN06LsVv07hwZxbahVqopQT0uQmyTpOx2tzJ4Vq9emjd e3xPw4EWP65OF4YTnYBtTOcGPk9HwKLyiNejtou1NNPIXSSqFSMIZQRgEMQqricf y+ptxGB932VE8Zi6ys07dAuDbzTDh0J32ly6NxdnZ2aTSumZwz35WnpfgrKXBrAc gHxYWgaM9ou8ctIOX5DWm5NCNUBXMh42OQ1aS458DTMsFmQ/GTBgywaU8BVjrtVW NTCJg5E1JefkRRzORhEksJUByW+HRL6zPf3kPBZAaMF55cIWowaZU0TuNiI9J2Gf 42Bw0Jv3YGWDrfaBi6sN4eVXfIKfRine3hrEriKemyP2zUyHR3DPBkYF06dQN8M8 vXchAORRo2uGmmtFO2ACjmIsFMDrgj/O3QfMmcOo6ApLRN1QRhWhC3kd2yJnjSYK LR7eFjPlUMvqcAJW6igXaQVfNxHk04rMK0GoWZ7cplqNhS/zcYw= =grp1 -----END PGP SIGNATURE----- Merge tag 'x86_sgx_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sgx update from Dave Hansen: - Use vmalloc_array() instead of vmalloc() * tag 'x86_sgx_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Use vmalloc_array() instead of vmalloc() |
||
|
Linus Torvalds
|
563cb0b1e7 |
cxl changes for v6.13
- Constify range_contains() input parameters to prevent changes.
- Add support for displaying RCD capabilities in sysfs to support lspci for CXL device.
- Downgrade warning message to debug in cxl_probe_component_regs().
- Add support for adding a printf specifier '$pra' to emit 'struct range' content.
- Add sanity tests for 'struct resource'.
- Add documentation for special case.
- Add %pra for 'struct range'.
- Add %pra usage in CXL code.
- Add preparation code for DCD support
- Add range_overlaps().
- Add CDAT DSMAS table shared and read only flag in ACPICA.
- Add documentation to 'struct dev_dax_range'.
- Delay event buffer allocation in CXL PCI code until needed.
- Use guard() in cxl_dpa_set_mode().
- Refactor create region code to consolidate common code.
-----BEGIN PGP SIGNATURE-----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=GNlu
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dave Jiang:
- Constify range_contains() input parameters to prevent changes
- Add support for displaying RCD capabilities in sysfs to support lspci
for CXL device
- Downgrade warning message to debug in cxl_probe_component_regs()
- Add support for adding a printf specifier '%pra' to emit 'struct
range' content:
- Add sanity tests for 'struct resource'
- Add documentation for special case
- Add %pra for 'struct range'
- Add %pra usage in CXL code
- Add preparation code for DCD support:
- Add range_overlaps()
- Add CDAT DSMAS table shared and read only flag in ACPICA
- Add documentation to 'struct dev_dax_range'
- Delay event buffer allocation in CXL PCI code until needed
- Use guard() in cxl_dpa_set_mode()
- Refactor create region code to consolidate common code
* tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Refactor common create region code
cxl/hdm: Use guard() in cxl_dpa_set_mode()
cxl/pci: Delay event buffer allocation
dax: Document struct dev_dax_range
ACPI/CDAT: Add CDAT/DSMAS shared and read only flag values
range: Add range_overlaps()
cxl/cdat: Use %pra for dpa range outputs
printf: Add print format (%pra) for struct range
Documentation/printf: struct resource add start == end special case
test printf: Add very basic struct resource tests
cxl: downgrade a warning message to debug level in cxl_probe_component_regs()
cxl/pci: Add sysfs attribute for CXL 1.1 device link status
cxl/core/regs: Add rcd_pcie_cap initialization
kernel/range: Const-ify range_contains parameters
|
||
Rafael J. Wysocki
|
f3e66e78f2 |
Merge branch 'pm-cpuidle'
Merge additional cpuidle changes for 6.13-rc1: - Make cpuidle_play_dead() try all idle states with :enter_dead() callbacks and change their return type to void (Rafael Wysocki). * pm-cpuidle: cpuidle: Change :enter_dead() driver callback return type to void cpuidle: Do not return from cpuidle_play_dead() on callback failures |
||
Rob Herring (Arm)
|
5578b4347b |
tpm: atmel: Drop PPC64 specific MMIO setup
The PPC64 specific MMIO setup open codes DT address functions rather than using standard address parsing functions. The open-coded version fails to handle any address translation and is not endian safe. I haven't found any evidence of what platform used this. The only thing that turned up was a PPC405 platform, but that is 32-bit and PPC405 support is being removed as well. CONFIG_TCG_ATMEL is not enabled for any powerpc config and never was. The support was added in 2005 and hasn't been touched since. Rather than try to modernize and fix this code, just remove it. [jarkko: fixed couple of style issues reported by checkpatch.pl --strict and put offset into parentheses in the macro declarations.] Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Linus Torvalds
|
28eb75e178 |
drm for 6.13-rc1
core: - split DSC helpers from DP helpers - clang build fixes for drm/mm test - drop simple pipeline support for gem vram - document submission error signaling - move drm_rect to drm core module from kms helper - add default client setup to most drivers - move to video aperture helpers instead of drm ones tests: - new framebuffer tests ttm: - remove swapped and pinned BOs from TTM lru panic: - fix uninit spinlock - add ABGR2101010 support bridge: - add TI TDP158 support - use standard PM OPS dma-fence: - use read_trylock instead of read_lock to help lockdep scheduler: - add errno to sched start to report different errors - add locking to drm_sched_entity_modify_sched - improve documentation xe: - add drm_line_printer - lots of refactoring - Enable Xe2 + PES disaggregation - add new ARL PCI ID - SRIOV development work - fix exec unnecessary implicit fence - define and parse OA sync props - forcewake refactoring i915: - Enable BMG/LNL ultra joiner - Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+ - use DSB for plane/color mgmt - Arrow lake PCI IDs - lots of i915/xe display refactoring - enable PXP GuC autoteardown - Pantherlake (PTL) Xe3 LPD display enablement - Allow fastset HDR infoframe changes - write DP source OUI for non-eDP sinks - share PCI IDs between i915 and xe amdgpu: - SDMA queue reset support - SMU 13.0.6, JPEG 4.0.3 updates - Initial runtime repartitioning support - rework IP structs for multiple IP instances - Fetch EDID from _DDC if available - SMU13 zero rpm user control - lots of fixes/cleanups amdkfd: - Increase event FIFO size - add topology cap flag for per queue reset msm: - DPU: - SA8775P support - (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable large framebuffer support - Drop MSM8998 and SDM845 - DP: - SA8775P support - GPU: - a7xx preemption support - Adreno A663 support ast: - warn about unsupported TX chips ivpu: - add coredump - add pantherlake support rockchip: - 4K@60Hz display enablement - generate pll programming tables panthor: - add timestamp query API - add realtime group priority - add fdinfo support etnaviv: - improve handling of DMA address limits - improve GPU hangcheck exynos: - Decon Exynos7870 support mediatek: - add OF graph support omap: - locking fixes bochs: - convert to gem/shmem from simpledrm v3d: - support big/super pages - add gemfs vc4: - BCM2712 support refactoring - add YUV444 format support udmabuf: - folio related fixes nouveau: - add panic support on nv50+ -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmc+efwACgkQDHTzWXnE hr6Dyg/9HVVI3lxuWAz9MEt3w+BON5KTJAxg5Zhvc5DwiUbDXghu8sfkUfanDWS5 /MqyPqLt5srXrtKTRDnzEI0Vf8YHeiDEcaydjpshEpCfteHZ7SADpvem8fp6/otV iYt8U6tMcGe9I+M2kwDkOTrKJIiyCKPi5hfBIAkxEAh6806ifPRtLkeMGbaSwBxH x6kZTE9ygGWAY7bAgbmVmm3JwrXG9mYDl9dW3cbi9gZ6PGAXHPZRUPvZoHhvfC2A UVgROH76Spm4rdWYGI3azj+gW3HsdGgUHcysb+lu37i261E+sT7kuV2UYtnOMzr5 igO1RlQ+rcfPYLG4n+oNXDMu5d1OQXELrlQzXptym4Konpd7b/GSeVctWV0wHWuv nG8g7DWAFFnLAdeWqLZpf1Brze33h5+572D3BioWB4LYSEATjwoTwcBKsdRuc4Wk RHxjumCidybTdo/8EB1ElGlH39m/mDQA0scMlVhS/BuiIssfgcBRfltI8S3HzHcW YQYq6xH7F9E3shs3/TYbWR4clm66ZTnZV6ClDfGJolzyF/hbV0rsbeSpDelpooE8 1Js7KuwVa+HvA4jtupY9vqxMTdXWwoGPfuUgKpOAreYibnd1T9Q1zVme/B1bUH05 518IjiMGCxDnBvFWaPT9DcX4zg7pS3yzjw3hGkdz3reUqat0Gy8= =8cUI -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "There's a lot of rework, the panic helper support is being added to more drivers, v3d gets support for HW superpages, scheduler documentation, drm client and video aperture reworks, some new MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel has some Pantherlake enablement and xe is getting some SRIOV bits, but just lots of stuff everywhere. core: - split DSC helpers from DP helpers - clang build fixes for drm/mm test - drop simple pipeline support for gem vram - document submission error signaling - move drm_rect to drm core module from kms helper - add default client setup to most drivers - move to video aperture helpers instead of drm ones tests: - new framebuffer tests ttm: - remove swapped and pinned BOs from TTM lru panic: - fix uninit spinlock - add ABGR2101010 support bridge: - add TI TDP158 support - use standard PM OPS dma-fence: - use read_trylock instead of read_lock to help lockdep scheduler: - add errno to sched start to report different errors - add locking to drm_sched_entity_modify_sched - improve documentation xe: - add drm_line_printer - lots of refactoring - Enable Xe2 + PES disaggregation - add new ARL PCI ID - SRIOV development work - fix exec unnecessary implicit fence - define and parse OA sync props - forcewake refactoring i915: - Enable BMG/LNL ultra joiner - Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+ - use DSB for plane/color mgmt - Arrow lake PCI IDs - lots of i915/xe display refactoring - enable PXP GuC autoteardown - Pantherlake (PTL) Xe3 LPD display enablement - Allow fastset HDR infoframe changes - write DP source OUI for non-eDP sinks - share PCI IDs between i915 and xe amdgpu: - SDMA queue reset support - SMU 13.0.6, JPEG 4.0.3 updates - Initial runtime repartitioning support - rework IP structs for multiple IP instances - Fetch EDID from _DDC if available - SMU13 zero rpm user control - lots of fixes/cleanups amdkfd: - Increase event FIFO size - add topology cap flag for per queue reset msm: - DPU: - SA8775P support - (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable large framebuffer support - Drop MSM8998 and SDM845 - DP: - SA8775P support - GPU: - a7xx preemption support - Adreno A663 support ast: - warn about unsupported TX chips ivpu: - add coredump - add pantherlake support rockchip: - 4K@60Hz display enablement - generate pll programming tables panthor: - add timestamp query API - add realtime group priority - add fdinfo support etnaviv: - improve handling of DMA address limits - improve GPU hangcheck exynos: - Decon Exynos7870 support mediatek: - add OF graph support omap: - locking fixes bochs: - convert to gem/shmem from simpledrm v3d: - support big/super pages - add gemfs vc4: - BCM2712 support refactoring - add YUV444 format support udmabuf: - folio related fixes nouveau: - add panic support on nv50+" * tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits) drm/xe/guc: Fix dereference before NULL check drm/amd: Fix initialization mistake for NBIO 7.7.0 Revert "drm/amd/display: parse umc_info or vram_info based on ASIC" drm/amd/display: Fix failure to read vram info due to static BP_RESULT drm/amdgpu: enable GTT fallback handling for dGPUs only drm/amd/amdgpu: limit single process inside MES drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X drm/amdgpu/mes12: correct kiq unmap latency drm/amdgpu: Support vcn and jpeg error info parsing drm/amd : Update MES API header file for v11 & v12 drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling drm/amdkfd: change kfd process kref count at creation drm/amdgpu: Cleanup shift coding style drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data drm/amdgpu: Implement virt req_ras_err_count drm/amdgpu: VF Query RAS Caps from Host if supported drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support drm/amd/display: 3.2.309 drm/amd/display: Adjust VSDB parser for replay feature ... |
||
Jett Rink
|
2e1827de1b |
char: tpm: cr50: Add new device/vendor ID 0x50666666
Accept another DID:VID for the next generation Google TPM. This TPM has the same Ti50 firmware and fulfills the same interface. Suggested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Jan Dabros
|
44637b0b40 |
char: tpm: cr50: Move i2c locking to request/relinquish locality ops
Move i2c locking primitives to request_locality and relinquish_locality callbacks, what effectively blocks TPM bus for the whole duration of logical TPM operation. With this in place, cr50-equipped TPM may be shared with external CPUs - assuming that underneath i2c controller driver is aware of this setup (see i2c-designware-amdpsp as an example). Signed-off-by: Jan Dabros <jsd@semihalf.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Jan Dabros
|
932e3a5e1e |
char: tpm: cr50: Use generic request/relinquish locality ops
Instead of using static functions tpm_cr50_request_locality and tpm_cr50_release_locality register callbacks from tpm class chip->ops created for this purpose. Signed-off-by: Jan Dabros <jsd@semihalf.com> Signed-off-by: Grzegorz Bernacki <bernacki@chromium.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Stefan Berger
|
02e9bda80d |
tpm: ibmvtpm: Set TPM_OPS_AUTO_STARTUP flag on driver
Set the TPM_OPS_AUTO_STARTUP on the driver so that the ibmvtpm driver now uses tpm2_auto_startup and tpm1_auto_startup like many other drivers do. Remove tpm_get_timeouts, tpm2_get_cc_attrs_tbl, and tpm2_sessions_init calls from it since these will all be called in tpm2_auto_startup and tpm1_auto_startup. The exporting of the tpm2_session_init symbol was only necessary while the ibmvtpm driver was calling this function. Since this is not the case anymore, remove this symbol from being exported. What is new for the ibmvtpm driver is that now tpm2_do_selftest and tpm1_do_selftest will be called that send commands to the TPM to perform or continue its selftest. However, the firmware should already have sent these commands so that the TPM will not do much work at this time. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |