kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
1,186,608 commits 117 branches 5,827 tags 6.3 GiB
Commit graph

1,186,608 commits

This branch
This branch
All branches
Author SHA1 Message Date
Arnd Bergmann
ce207be3e2 Keystone2 device tree updates for v6.5 
Cosmetic cleanups:
 * Do not capitalize hex digits
 * Unify pinctrl-single pin group nodes for keystone
 * Fix eeprom node names
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAmSLO2sACgkQ3bWEnRc2
 JJ2a4g/9F8InKKpPZHPEkRVZ2oQak/MX0cP4TaFBY6INVklzUdpSS+9UGLsI5MtK
 h1RkNLtaxhq6qRCFj81+yF2R38JOSc1/knf6PGST8ugP5O2GzmpLLTsSA1iRVANq
 lXCJ87vyvA47Ukohpfl3k4m+ceYxO3vFwmPk/IObBq+pdIVJ5vJPZiufwqRut3jM
 qer6Eus9ATKKpULzOC4WwF2eSsnZGQzkRNutMDQ/4pGzpoO5fqUylEJt9wE7sUvo
 29iqQjbCiRMe3kygnbbzVwgVqef2GwdJp8uGZV1PdMWVVQHZn+8CJl4AhWlFBMRs
 CckLofluEO+vp9f6it1xCk/6Zfw7KYE9mWn/h0JlRrVBgov33A/u0AuxXEFtgO7R
 SHgKugWk2gVRYT9cDDoJ5DD/NCvMNilShO4G/+9DAgqsDy9YsGK4ZNZxuhEd2KW1
 MgsZz6Yb3rEYwuOybbn39IljUWK21o2EhXsRYREns83vDNHWoMsW60Iz6Lc37D8T
 AWNljhOJKzZj4euOs4e54t3vM0JVYEd2gY/yui9j/ifhIXav1wftssDqx8ixjFJ3
 DbpZwUlWcSlwHYYaHSgM7BebNsd0uTMPZjn2veoWHX2uyPvSQG5VQ2ENJw7zg9tC
 i29woPF/woJQlvJHjbvy613WF/aEbZ3kQ8Gq6xiUA3N/luF5eAY=
 =mCy6
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEusACgkQYKtH/8kJ
 UieLshAAwBge1MHF6Vsm+A7ZI9+XjmDCYzeQ74f+VAUn9XQogNPr98Hxiems7+vD
 0AtfxH8KFBOqUexjHF2U51KErGNR08uuqKuNEO9czcWZp2YVijn5RUqGjEdPkV3L
 AOgGmiI6B+uWnkmChwc5fqg21yaxoboIoOhC+4kaAx56Q8UzY0VltNwPbO7my7zb
 RbpJDPYERIjAl4EJVGj3WEh0vDF6ldnicr+dGMKp3vPlmP3GQTggIJ60/gENa1Rr
 7LmBCf4MQOA18YwHJnvkIi7fMNTtzkC2A33ANiJG/Wgk3EhoFKykBZ3cBnU3tKrd
 7OkIQcKbSZ0QzYphIDc0WPjUz4R0T6ZSsKC4dJZRgtthqI1C+OvWrMMLQlIgEAgr
 ijXQdok/NJt3XJa7MR/uTu5klS+SZ+C9jf5B33I9H3ovfLN7CgGTJFTRs4gS739D
 sThwkubm0fwboWTfAJstdjZ6CQGCLZ715ltX07fNZ12q+618nWXAQ3acHDQNYOZa
 9JB6/waPML7ga/VTwMGCnShqstHIPzb6Tdj6WiUJbtig/7iEkSo9HeN8ZYdGg5zk
 LxdUgq32FkyhAHgmOUq1T4cW8qSWr1vfIwAdCHF9fjqsx5CYaWV355LeGAPELGXV
 aTe52YUDbHB6M3CMh6OhVac+mDvXJfHfIMFxAau/fEyHh0V/BSc=
 =NwkY
 -----END PGP SIGNATURE-----

Merge tag 'ti-keystone-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

Keystone2 device tree updates for v6.5

Cosmetic cleanups:
* Do not capitalize hex digits
* Unify pinctrl-single pin group nodes for keystone
* Fix eeprom node names

* tag 'ti-keystone-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  ARM: dts: keystone: Do not capitalize hex digits
  ARM: dts: keystone: Remove ti,keystone from soc node compatible
  ARM: dts: keystone: Fix EEPROM node names
  ARM: dts: Unify pinctrl-single pin group nodes for keystone

Link: https://lore.kernel.org/r/20230615164127.qcgwrbwpmclx5wlm@landscape
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:58:19 +02:00
Arnd Bergmann
d09d747ee5 More Qualcomm ARM32 DeviceTree updates for v6.5 
On MSM8960, support for USB is added and the Samsung Galaxy Express is
 added.
 
 GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard.
 
 On MSM8226, QFPROM, tsens and thermal zones are defined, and the
 description of the clock hierarchy is improved.
 
 The PCIe endpoint controller on SDX55 gains a interconnect path to DDR
 defined.
 
 Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following
 changes in the LP855X DeviceTree binding.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmSLPokVHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FBn0P/RnvmT74Rd4B0nfVmKAHm++z1QL1
 s3vSxKanuwHM/fPUfNsKimBbhzTtu2YTB/m4Sp+HPGkjMnczQBbshf18tBPC3nJ1
 h4UjwugpoE3JWnIDfeowSsyMGb1VoZr038TBe2FFwNcHrAb5zPC7K4gnsfJa4ZzE
 LTXMGwlZp8aNUQ7rG8WdLDU28E159UhLMeQJNw/nHZJTCisoJwznPO/b9VOkTDMe
 JjvfxqX5uEU7plBD2MCln/3qQLF78cj/eqc7szqaUGSJ7DSTlMh3de5zBGwHrKVH
 6WOAcQGu1z6TOnlXv7BGxTX+0o3dXJd7CBiLg6couc7nh5fvzSC76JtnvICSUfid
 89Jd9XUYyvPE+bk8BVoROgLfJk0llsDUw0bXv1I9cgZ4pX8J8+plyezghv56+IK+
 1GV8nR8in+zB9EFjB1rM/3TneHTNSVp1w6ytooMUczGpnDdkESq+q1srFZlE7Xba
 PmZsoMiWg32UPz1GAnU7WoYEmCG0bMWlrwHp4nK3QY7FBpB+fbpyIx9VFa/qFImf
 vMxOZDUnqXYL0p8Zg5bXRJSLsL+JAzxZyXRZpuK/vfd4EGLdGPEM33Y5gnyV0bgU
 1q3EbF4dffBMhG6FP00mP49I40rKk8tvnFsCIPRZ34skTefFQKBG58eQ9orE9CsQ
 reVLvj6kRARSjWVT
 =UOBe
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEroACgkQYKtH/8kJ
 UidGqQ/+KxM0RFduGczHbURgHjbyUjaSmV4Ps0RPeodiOoi4QQbJJZerdpU9S0Gs
 4GAxO8N6qRIurnT9AS18kE4FebaUO6N+CvCqTgpI1fWrjay40ocDz00sWD705gwC
 wjVrHA/TOoz6YTCP44HxuKdn+qn1un8Vu2VtIqFWp2GDvbiAKckZ6ysFICnVeM0X
 wPYl4PT/x9CHeee0nGr5XGv0tdymv6Nw5SAZrOpuvMGaSb4YNO1qLXm1Pm7IzX/P
 tAbfsgy2Pzqq0KGRonoW3W0yF3jpqaWKa7AUzJIflvunx6lJXAh1jBUypcnDBVs9
 PiKoiUDUc+o0jJnKk2CD4SU8dTcZQwvcofohPo3CSzyklwri9++i4ICzDTPGOL7V
 F34vCyNZP/lS3CubQ37c6zhsueumy+HVAW4tbH7FXWQWpPR536qG8ykB0doLKW7B
 g5Xc1PmG6A1+JcEsPNd80Ot8g5hokCQCLD7+8Y7ZrrxxPccLmdN2/kWGfWdpKxNe
 O+mlscs+sEGlEH+SVzFeqVONRbVnIigKEHlDbNTlOhdChPd3Z/1uS5G7h45LFrE+
 5kIZZYwHioWR43F6SwHDFB5hIR3nZRsA/E1JqZ81T5EV6qRW/Z1VbyfkMkmJ8tF4
 PrplHquj4O7gbA0fXulwV0ukbUDuOoIU1vPcNn7ugkPRkc4PzKc=
 =//4G
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

More Qualcomm ARM32 DeviceTree updates for v6.5

On MSM8960, support for USB is added and the Samsung Galaxy Express is
added.

GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard.

On MSM8226, QFPROM, tsens and thermal zones are defined, and the
description of the clock hierarchy is improved.

The PCIe endpoint controller on SDX55 gains a interconnect path to DDR
defined.

Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following
changes in the LP855X DeviceTree binding.

* tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm: dts: qcom: sdx55: Add interconnect path
  ARM: dts: qcom: msm8226: Add thermal zones node
  ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells
  ARM: dts: qcom: msm8226: Add qfprom node
  ARM: dts: qcom: pm8941: Add thermal zone config
  ARM: dts: qcom: pm8841: Add thermal zone config
  ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config
  ARM: dts: qcom: msm8974: rename labels for DSI nodes
  ARM: dts: qcom: apq8074-dragonboard: add gpio keys
  ARM: dts: qcom: apq8074-dragonboard: add onboard leds
  ARM: dts: qcom: Add Samsung Galaxy Express support
  ARM: dts: qcom: msm8960: Add USB node
  ARM: dts: qcom: adapt to LP855X bindings changes
  ARM: dts: qcom: msm8226: Provide clocks to mmcc node
  ARM: dts: qcom: msm8226: Use XO from rpmcc where possible

Link: https://lore.kernel.org/r/20230615163926.1462225-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:57:30 +02:00
Arnd Bergmann
f07c96511d MT7530 (e.g. BPI R2): 
- several DT clean-ups
 - add port5 as CPU port
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmSJ13IXHG1hdHRoaWFz
 LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH66eRAAsoU2H7OxXUewNAdQzuRUEsu+
 Z7Ylb1yeJpleKZb2sDNW1IpkwQw9t97snH6yGA+8WGPWIejVZx098uTFKduIDkp4
 lqNgZLuLTaWqd2JrUMp9p5S0uKoFqmlQ4n9xgjykKmSHvO/d7umNSJsLmsnQvvXC
 Edzxt2NL3ZGpIMg27M2nIeMtFEkGMuZMJjwOu/3da2Uu0mfc6uU6NyoY4ndvgFjf
 hbyQeCiVzO8HXIZrfKlyQ+zZmzNtJrYVs4Y5L1ngBx6Fxaj1q1DwpdarB+Hpmik7
 49QzzGLiJmdoa2b/yl7lsp4Q8lUKX7frVanks2kHhfJDb5FEy8RZ1VeQmUWwqNTk
 up4/2ADuVrlnHxHvQ7XZeUpKisjqEyFMVSQPqTrhiKJlopGuimZzz6r277DQkwyq
 gLEhsBl7OEFr4hmGabSwx+0RUDj7dJcKeM1Kv4AXIA2lDyUAHoL9EiRjskj0ZXAf
 COvUsbLG0aakkEMBClRuO+o1iZ6emp9Kvo7Px68fEwP7x7BZYjL5H7U8T8IilPHH
 WYj8qADNPEFVg12rAJj0QQipSpUxDO34hKEv5fTUwRgD2wQDA8Hd115Q1l3hFf97
 CGYMjllrFkiv+efcrkN/m0j9saKVC++DDukK9tZnI6tGRCBVdhgvRu/YONpTXOcr
 YslILS/jM9CsAc04i/M=
 =ZUuN
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEnMACgkQYKtH/8kJ
 UifmnRAAoODUzDI+ErJHUwUU2KInZ59245IAC6vOFaqrXmDt5M7+qBs992+rKLdQ
 4Xg1DFGnxyrJHD0UzUeCCyt5WJZvUDC56I/9PvuIE6Rzf8aB3tBSX5CMXxiHvHns
 iiOUHx5zJxKwYSTXZ/NHOrNgrEnMqNkvXIPBTi8pn9uNDeDUKG53jSd75q0oFFTs
 dLDwYx5dH7ZBnOGxnzyuoMfsVOLNEAgXQVHTO9cYUYVl6b7JD1iWUIkGz3gf21Yb
 WhPD8Ct0v5iTuEdOB0eOcv1M5nJLGMpFsj8hlGrmopABxKSk8kn3p+L6/8zkiUsp
 NOJb/kXo9JN0190osxu7TmOK5itU8yXqzHie3slAvb1/Jk7wHQvhH4AWfwB7xKuz
 Q8XRzOOGBIbqGZe6tbSHRXsfA8srxz3OBc1nO9Dsdgt2HEc0ZswO7scAmCM0n4PR
 Yh1FdmFsRBmz+BFmfKNuZlP/ezGIpr3PnU5WSunR+pIahwRs8P+e3rUFLjk6Cic5
 0dy5hX3SoafhvuEgBRrjOH02O43RuQ5IUO3Pfi60INHX1cOycZbHYjXnYLVjacTb
 DdJUVSVCzTtk0KoY1mHgj6TARNSWeiP3DSX9XxH1+Sx3UCwsUmUHxjw/8ibWrd3A
 E06VrSfQySbvZmTm38Uhhyv4d9Z7ueSQ+jZuHofE47v/SpDKKIQ=
 =BnTC
 -----END PGP SIGNATURE-----

Merge tag 'v6.4-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt

MT7530 (e.g. BPI R2):
- several DT clean-ups
- add port5 as CPU port

* tag 'v6.4-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm: dts: mt7623: add port@5 as CPU port
  arm: dts: mt7623: enable flow control on port@6
  arm: dts: mt7623: change mt7530 switch address
  arm: dts: mt7623: add mt7530 switch to mt7623a.dtsi
  arm: dts: mt7623: add gmacs to mt7623.dtsi

Link: https://lore.kernel.org/r/98e21acb-d792-6a8c-2de6-12d5af8a8111@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:56:19 +02:00
Arnd Bergmann
055fdcac93 More Qualcomm ARM64 DTS changes for v6.5 
This introduces support for the Qualcomm SDX75 platform, with the IDP
 reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the
 RDP454 is introduced.
 On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added.
 
 For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added
 to the CPU cluster power-domain to flush sleep & wake votes as the
 cluster goes down.
 
 On IPQ5332 additional reserved-memory regions to improve post mortem
 debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the
 RDP474 is added.
 
 On IPQ8074 critical thermal trip points are defined.
 
 As with IPQ5332 additional reserved-memory regions are used to improve
 post mortem debugging. Thermal sensors (tsens) are added and zones
 defined. The crypto engine is added, and support for the RDP454 board is
 added.
 
 Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and
 the purpose of msm8939-pm8916 is documented. MSM8939 has regulator
 definitions cleaned up, following to the previous effort on MSM8916.
 
 CPU Bus Fabric scaling support is added to MSM8996 Pro.
 
 On QCM2290 CPU idle states are added.
 
 For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC
 support. IMEM and PIL information regions are defined for improved post
 mortem debugging.
 
 The Qualcomm Robotics RB2 kit gets its on-board buttons described.
 
 A few fixes are introduced for the newly merged SC8180X, in particluar
 the DisplayPort blocks are moved to the MMCX power domain to avoid power
 being reduced prematurely during boot.
 
 The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s,
 and resets for the soundwire controllers are added. The OUI is
 specified for ethernet phys on SA8540P Ride platform, to avoid reset
 issues.
 
 Charger description is added to the PMI8998 PMIC and enabled across
 OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1.
 
 On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU
 clock controller and IOMMU definitions.
 
 The Fairphone FP4 gains Bluetooth support.
 
 SM8150 is transitioned to use 2 interconnect-cells, and the USB
 interconnect path is described to ensure buses are adequately voted for.
 
 The same changes are done for SM8250, and the resolution of the
 static framebuffer on Sony Xperia 1 II and 5 II are corrected.
 
 The USB bus paths are also added to SM8350, SM8450 and SM8550.
 
 On SM8550 DisplayPort nodes are added, as is the PWM controller for
 driving the notification LED and the RTC is enabled. For the MTP and QRD
 boards, the soundcard and audio codecs are defined.
 
 A Tegra change, related to LP855X binding changes, was accidentally
 picked up and dropped again later.
 
 A number of DeviceTree fixes identified through validation was
 introduced as well. Additionally a few nodes got their default status
 changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu
 node).
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmSLOjsVHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FlyUP/0PZFIRutqnwwr/daOZAhDgw6pQW
 jseUFIUb9yKan8KJZcHOf38xxqfj/bllQQNIQeM8qw03e7LJf/Mcteg3FYNgxD9m
 vAWdQby2ZBcAYy3Qxjc3H+cb2fPV8yEJZ4JX/yOuLPfx9zE8HMoT8M9JBHZlZc8T
 0fzgVxqRz1wt5Qjzv+BsWg4GUiTARtRbYxDVzdFZFDF6f7Xcpdsq+HaImJdYisXh
 m/2lQ34rDBTVOMN6Og5U7lGjfCyk6hn3k0OoSpObLRBNV34JH6ViDVhmNbFWKNNS
 QGFDAEa+jjQDrEo2cUHiHfnlKzcQpheLoco7MNkzDwy/8Rd3/k3ndj/+oCpgGea5
 VFTb0LygJPQnHfggzpxc+v2pBfoocEUvKrI+sluXeNnLua+jvlLz6Z8Wm6mVaBZv
 hzw4NqaXHRtzqgjo/37t7Hwns+uyd+rg/gjh8xfdu65/kVZiTstK1BGVCoKMs1LD
 J0UcQGaevfBH9+EYNcKly5qjEMhsUxwn4i7oyjerdQ7Wt4nwzPqfs7zv513Ns5bO
 eLG49FsCZjzvAn4AC3R1POPVrP2RBg/zeBzL/34gkgBLr/TR1k1zyPWxovb6Tuq9
 8R3T4XBA1kwh1c7R5av1033dyvW4N8y6vp9z+kExuPz4qQ+SsWKoXAeM2budkTQ/
 c3oBU6U+BH9oCvSV
 =Fga/
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEgoACgkQYKtH/8kJ
 UifYRg//Uu6CMkGFJCfMVNS8Z0lykAW3FtEupzi+lWVP+2i+QsR8FXTZ3EumyBA6
 QoRX1FtEKtRdJatMUgWlCbv8newKiII9fwKrV/EK7u/CTC79zX9ak3DonxXu7Z2i
 a6dzH5GVnHfVe7BTQdJuOylxKneMNNECmnkYYUWry1LES1zLhUZy67GsdbDSCxpF
 evzT8ly6NLSSJOJKXlcmwzcGMXhi7HrCdvsZhPdJZ1cN8c/tfrj+S8kmHxs5Qw3B
 TOjFi14w2CA/duvwQLV+0KIuHc/Vn8oYI0NnD96aahlZA+QFMk1hsdeETtXL6guf
 S4FKB+PNVtFnMCMq25xsTOaqEKjse8+xBgTN9TAvB67TJUQ3J2zibn1jjaGjtej7
 w2ry8FC/pgSFbs9KftAL7mDFCICo7qyOhpfuuG+s+ti1m7h5Fon2a+UKc0T0m80w
 qR1YXohi6rzXTlcV92m2CRZIvSBPf1UQAnFqyjZBIvePpD8/TqYs2M+IIM0dmaBC
 Xs+n+3ORIte7hws5BodXaWwsi0NTFm8rQaeK94Cj100kWMxrKZS5JIIdZ/Dy0rRk
 LXWKj1W4h6rrwM34r5oeyc0k9pYoc7coDItEqu8VyKz7pj9rjcG8B+lqdp6QjNK+
 +gNnVF4UmEbRpG6EZm9uC9IshiIQp/8DhO/lRZMb37v1YEB6/mg=
 =ThxV
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

More Qualcomm ARM64 DTS changes for v6.5

This introduces support for the Qualcomm SDX75 platform, with the IDP
reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the
RDP454 is introduced.
On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added.

For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added
to the CPU cluster power-domain to flush sleep & wake votes as the
cluster goes down.

On IPQ5332 additional reserved-memory regions to improve post mortem
debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the
RDP474 is added.

On IPQ8074 critical thermal trip points are defined.

As with IPQ5332 additional reserved-memory regions are used to improve
post mortem debugging. Thermal sensors (tsens) are added and zones
defined. The crypto engine is added, and support for the RDP454 board is
added.

Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and
the purpose of msm8939-pm8916 is documented. MSM8939 has regulator
definitions cleaned up, following to the previous effort on MSM8916.

CPU Bus Fabric scaling support is added to MSM8996 Pro.

On QCM2290 CPU idle states are added.

For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC
support. IMEM and PIL information regions are defined for improved post
mortem debugging.

The Qualcomm Robotics RB2 kit gets its on-board buttons described.

A few fixes are introduced for the newly merged SC8180X, in particluar
the DisplayPort blocks are moved to the MMCX power domain to avoid power
being reduced prematurely during boot.

The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s,
and resets for the soundwire controllers are added. The OUI is
specified for ethernet phys on SA8540P Ride platform, to avoid reset
issues.

Charger description is added to the PMI8998 PMIC and enabled across
OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1.

On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU
clock controller and IOMMU definitions.

The Fairphone FP4 gains Bluetooth support.

SM8150 is transitioned to use 2 interconnect-cells, and the USB
interconnect path is described to ensure buses are adequately voted for.

The same changes are done for SM8250, and the resolution of the
static framebuffer on Sony Xperia 1 II and 5 II are corrected.

The USB bus paths are also added to SM8350, SM8450 and SM8550.

On SM8550 DisplayPort nodes are added, as is the PWM controller for
driving the notification LED and the RTC is enabled. For the MTP and QRD
boards, the soundcard and audio codecs are defined.

A Tegra change, related to LP855X binding changes, was accidentally
picked up and dropped again later.

A number of DeviceTree fixes identified through validation was
introduced as well. Additionally a few nodes got their default status
changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu
node).

* tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits)
  Revert "arm64: dts: adapt to LP855X bindings changes"
  arm64: dts: qcom: sc8280xp: Enable GPU related nodes
  arm64: dts: qcom: sc8280xp: Add GPU related nodes
  arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators
  arm64: dts: qcom: msm8939: Define regulator constraints next to usage
  arm64: dts: qcom: msm8939-pm8916: Clarify purpose
  arm64: dts: qcom: msm8939: Fix regulator constraints
  arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6
  arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages
  arm64: dts: qcom: msm8939: Disable lpass_codec by default
  arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies
  arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons
  arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi
  arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl
  arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl
  arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl
  arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl
  arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl
  arm64: dts: qcom: msm8996: rename labels for HDMI nodes
  arm64: dts: qcom: sm8250: rename labels for DSI nodes
  ...

Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:54:34 +02:00
Arnd Bergmann
af3c684721 TI K3 device tree updates for v6.5 
New Boards:
 phyBOARD-Lyra-AM625 Board support
 Toradex Verdin AM62 COM, carrier and dev boards
 
 New features:
 Across K3 SoCs:
  - Error Signaling Module(ESM) and Secproxy IPC modules
  - On board I2C EEPROM
  - Voltage Temp Monitoring (VTM) module
  - DM timers (GP Timers)
 J784s4:
  - R5 and C7x DSP remoteproc, ADC, QSPI
 AM69:
  - Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al
 J721s2:
  - USB, Serdes, OSPI, PCIe
 AM62a:
 - Watchdog
 J721e:
 - HyperFlash/HyperBus
 AM62:
 - Type-C USB0 port
 
 Cleanups and non-urgent fixes
 Particularly large set of cleanups to get rid of dtbs_check errors and
 dtc warnings:
  - Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A,
    J721e, J7200 that are used by bootloader
  - Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4
  - Drop bootargs and unneeded aliases across all K3 SoCs
  - Move aliases to board dts files from SoC dtsi files
  - Move to generic node name for can, rtc nodes on am65
  - s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update
  - Fix pinctrl phandle references to use <> as separator where multiple
    entries are present
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmSLMAwQHHZpZ25lc2hy
 QHRpLmNvbQAKCRDERh5FfJEW46tOCACQt9vBouxA7pmH+oerqdf8VDqJbjDsgnTx
 kU3BUBLZn5qIJkeLqkoH5MueuE/H74mKKNBtRooAcRyUD9aZuxh/QC1/g2ITajWt
 ndeHQzE6Hh4rNRtDrhp8CCU1FJdr8Ay3bqzPOOxwQKivFST2/i7+SbK0y8LnUN1B
 QRoawzm0kaGH5tG41e5lbVsrIvG24MSoGq7PXrcCDMqD02cGOV0PBghZbUbmGMKG
 sLPdbrh0uOHK8X6HNxUtOH3wKlQHHNU4RXGq8hoXlWQaf0Rdfd2fPPAioZVNJO+s
 hPhSKCJIVkP7BhB1CpAVH1BKhWGaL7pEsBnUoDTeP7pFpxZF7qcD
 =2tWW
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEXUACgkQYKtH/8kJ
 UicDIQ//WG9FtWtd+6icdB4hLnDm/aUjrP9VHeKE1p7AZp1J5+sSB8utbR6YcNKq
 IvR8Tr58te59L5iUlcR+IA06iv3ny/AswXylhtvP2jITdlmQDpXS+pp5RwIlltiu
 JOCk+3jhfH8HO9gp3Ubk1loIyOmaDkz7EIszyxLceKo1kmvzWt708wMUtST/uOJU
 eF2hgBF1T3I0JSUFtiaW5RXdERIlV9Q0cTf9nPRAV8uwqJ7iExNt6O8pyf01ZZd5
 rHBP4jNw/OEFvPin+gnkzXi91hNTpQj+Y+hdIZiTIOI3EuCwUU9WMBJ/rz+TrK/E
 YEGicGpiM2rN+u8VucqnkZc+dGjIBpD8a6XBUObnSeHx34AyTMKeVIK5w88zbliR
 SnLMl+hSh5DYOIx8tpD0ACG3aeaZk/42Fe3lWbnT6i4d4YI7C4+XDJAdWneaAXtF
 BkNGxaHI4pgrzauNi1vAk7eSAiiiEKId4C2Lnh1tgD9T3ay23yRzVF3oPcxm7mqg
 L13WJDysOo+0auc3zY0CcnzPOHNf0YB1jdBVEfl7K2HMcQBxjxSvv0rCnZ55m784
 6k4eAR/6CPKiqYLBdESrgnAF74xse+odjanVYHtQrDoc68iNeWUg9i/csyl08L+2
 BKvlQdTHIgOkoZcx45EEPVtVAbJceoumC6H09BYVGtVmWaxk8Fk=
 =fJ6G
 -----END PGP SIGNATURE-----

Merge tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v6.5

New Boards:
phyBOARD-Lyra-AM625 Board support
Toradex Verdin AM62 COM, carrier and dev boards

New features:
Across K3 SoCs:
 - Error Signaling Module(ESM) and Secproxy IPC modules
 - On board I2C EEPROM
 - Voltage Temp Monitoring (VTM) module
 - DM timers (GP Timers)
J784s4:
 - R5 and C7x DSP remoteproc, ADC, QSPI
AM69:
 - Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al
J721s2:
 - USB, Serdes, OSPI, PCIe
AM62a:
- Watchdog
J721e:
- HyperFlash/HyperBus
AM62:
- Type-C USB0 port

Cleanups and non-urgent fixes
Particularly large set of cleanups to get rid of dtbs_check errors and
dtc warnings:
 - Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A,
   J721e, J7200 that are used by bootloader
 - Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4
 - Drop bootargs and unneeded aliases across all K3 SoCs
 - Move aliases to board dts files from SoC dtsi files
 - Move to generic node name for can, rtc nodes on am65
 - s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update
 - Fix pinctrl phandle references to use <> as separator where multiple
   entries are present

* tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (153 commits)
  arm64: dts: ti: Unify pin group node names for make dtbs checks
  arm64: dts: ti: add verdin am62 yavia
  arm64: dts: ti: add verdin am62 dahlia
  arm64: dts: ti: add verdin am62
  dt-bindings: arm: ti: add toradex,verdin-am62 et al.
  arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625
  dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardware
  arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename
  arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom
  arm64: dts: ti: k3-am64: Add ESM support
  arm64: dts: ti: k3-am62: Add ESM support
  arm64: dts: ti: k3-j7200: Add ESM support
  arm64: dts: ti: k3-j721e: Add ESM support
  dt-bindings: misc: esm: Add ESM support for TI K3 devices
  arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom
  arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux
  arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom
  arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux
  arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header
  arm64: dts: ti: k3-j721s2: Fix wkup pinmux range
  ...

Link: https://lore.kernel.org/r/7fe0c6de-cb99-9c89-8583-b3855fde16f8@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:52:05 +02:00
Arnd Bergmann
5e64ee4204 arm64: ZynqMP DT changes for v6.5 
Various small fixes and cleanups to be aligned with the latest dt-schema.
 
 Other major changes are:
 - Wire mali-400 gpu
 - Change board name for zcu1275
 - Use ethernet-phy-id to handle ETH phy reset properly
 - Switch to amd.com emails
 - Update people in DT bindings
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZIHGHgAKCRDKSWXLKUoM
 IQW2AJ0eRZ5g7SYEg1y/zir6/j5s4RyaiACeO9EQJQ8nKkez73w4uoTBdmmOmlY=
 =R8F0
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEQgACgkQYKtH/8kJ
 UidFLBAAyqGoiZH0Oh33f6R2nU1+NtH6pTiv4P1z1v8WmIMEvShHk+WhpGllqryC
 rQKFwMdTIM3L2+zqYvUM5ksysBnbxePVVTV15qZaDpkbV1/Oz/G70EWF0VtGQYxk
 /OLiMc84WMfaR772Htlb1mmos+9TtSlIwi5f0vkWRCOComPh+vc3u+GedUVBA3M/
 9J0VuymgBeE9H4pGOruTNn1aUxD70hTXiP6Qz7Sv7Eksew80GfGlpNf5EqFM6Lrc
 /Np03tHVN1lMLDmSbeHRM9ONDQDSEDM2IT0tvN9XH/p1vzKCBpRxHh7/7DVnJdae
 G/NUGzw9uxZkmvKkXpjTRjYO08GQu6DxwO4G6qBOA9Rr77ibohVdLEvtfpfkwLxO
 D9oFmi2NZjtyWii5G0xZkfnuB6aU9x2BsPRQduLTfTEYTWoJuoFnmBM/Zhinj0vO
 2h0+2PqoT0LpwzcorsbCsk3mHPz0kqc3tNGOd2hGtRvmm2fLxoNbj0OqhLgFLYht
 OUetwTNqWogKUEzjES526v6ulkAKWkSc0OrXOZkDVyWHCDdEQCMR121GlC6Qo5LK
 5OLa2rR5iQ6Er6+N1lzg4AjB5s2k/C40K/pNQIm65uTB4D4YcCvcUABRuRMeR+Nn
 FlgXDPPyytnZdNhRPt7AhFk10r+AbT8ad3LwjHEQlUT1Mxm+eck=
 =jqDa
 -----END PGP SIGNATURE-----

Merge tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx into soc/dt

arm64: ZynqMP DT changes for v6.5

Various small fixes and cleanups to be aligned with the latest dt-schema.

Other major changes are:
- Wire mali-400 gpu
- Change board name for zcu1275
- Use ethernet-phy-id to handle ETH phy reset properly
- Switch to amd.com emails
- Update people in DT bindings

* tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits)
  dt-bindings: usb: xilinx: Replace Manish by Piyush
  dt-bindings: xilinx: Remove Rajan, Jolly and Manish
  arm64: zynqmp: Used fixed-partitions for QSPI in k26
  arm64: zynqmp: Add pmu interrupt-affinity
  arm64: zynqmp: Set qspi tx-buswidth to 4
  arm64: zynqmp: Fix usb node drive strength and slew rate
  arm64: zynqmp: Describe TI phy as ethernet-phy-id
  arm64: zynqmp: Switch to amd.com emails
  arm64: zynqmp: Convert kv260-revA overlay to ASCII text
  dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  arm64: xilinx: Use zynqmp prefix for SOM dt overlays
  arm64: zynqmp: Add phase tags marking
  arm64: zynqmp: Describe bus-width for SD card on KV260
  arm64: zynqmp: Enable AMS on SOM and other zcu10x boards
  arm64: zynqmp: Enable DP driver for SOMs
  arm64: zynqmp: Setup clock for DP and DPDMA
  arm64: zynqmp: Switch to ethernet-phy-id in kv260
  arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2
  arm64: zynqmp: Add pinctrl emmc description to SM-K26
  arm64: zynqmp: Add gpio labels for modepin gpio
  ...

Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:50:16 +02:00
Arnd Bergmann
c9a5aa0e53 RISC-V Devicetrees for v6.5 
StarFive:
 Watchdog nodes for both the JH7110 & its forerunner, the JH7100. PMU, P
 being power, support for the JH7110. PMIC and frequency scaling support
 for the JH7110 equipped VisionFive 2.
 Most of the DT bits for the JH7110, and the SBCs using it, are pending
 support for one of the clock controllers, so it's a smaller set of
 changes than I would have hoped for.
 
 Misc:
 Pick up some dt-binding cleanup that Palmer assigned to me & had no
 uptake from the respective maintainers. My powers of estimation failed
 me again, with part of my motivation for picking them up being the
 addition of new platforms that ended up not making it. Hopefully next
 window for those, as they were relatively close.
 Exclude the Allwinner and Renesas subdirectories from the Misc.
 MAINTAINERS entry, since I do not take care of those.
 
 Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZIdfVAAKCRB4tDGHoIJi
 0mspAP4m1zrOWojsDmwpodCajBTW6PEtMAztxRUj/qeA4IEsYgEA+NI1DhrUkwZ6
 K1vw1VzP56auVkdS3X7ZBhEpjfnkCg4=
 =JA/v
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEN8ACgkQYKtH/8kJ
 UifaixAAmMZlmAkDRhrLELP1z4yAikRFqtS/T12sMw6uMz4CNaMPpT6EPKmsIktv
 v8VS9MwwDsx3pYkO8jLzA5spXbaL8WFByykH4e1i8PrQjfWsLyVdjvLd4YzSxBic
 RF10/HRrf2bcIAPIJj6G4pOo4FdWen3BPSheVL7VMxaRXpGnWTBvwCuhLlvNMdm2
 NOz9KqW95o8U9zmskO21Gd7Y25dQAjdv4QP7G8w1hteW801zxVnFep5gMzra5fY0
 q3226qcgmqBBa4RT5o23V6/3tLDcyCbnEwmPjXVo/Xspj+USRopOugdOOyTkXogE
 M8JTkj874oTWojQaUcsqJBFIohruqXxYbA8VYitya7IALoIQJ5NOdGUtkqv6Tl/i
 Y/VqP6Gh4Vi6ETtGnTLWl03eZ9wJBWvysJ/03FyabkKpDDYo1ABn9a4wDdwrPoXk
 4okvCXDNDTYY19yxWlPOEIf3P/lVst5Cr2MPm0YGJDx4biTh0peg23GwncjvGnXk
 FcRifMjshzU0N15WtXM5fwR02p6pM0j+PNFMuHRIUewqqWTFaKqIsdkbV3S3eM+l
 TkN5G0Gklrx7VJbDqDS+ASsNCXWwR4AVHhoIZ99ldxAribiPOqAB0+20npn+Nchq
 T4gFybdFEOuYB1aawEbk2LTh7hV7HJhTwpcYlNX1VNbyrXA6Yjs=
 =NR4f
 -----END PGP SIGNATURE-----

Merge tag 'riscv-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt

RISC-V Devicetrees for v6.5

StarFive:
Watchdog nodes for both the JH7110 & its forerunner, the JH7100. PMU, P
being power, support for the JH7110. PMIC and frequency scaling support
for the JH7110 equipped VisionFive 2.
Most of the DT bits for the JH7110, and the SBCs using it, are pending
support for one of the clock controllers, so it's a smaller set of
changes than I would have hoped for.

Misc:
Pick up some dt-binding cleanup that Palmer assigned to me & had no
uptake from the respective maintainers. My powers of estimation failed
me again, with part of my motivation for picking them up being the
addition of new platforms that ended up not making it. Hopefully next
window for those, as they were relatively close.
Exclude the Allwinner and Renesas subdirectories from the Misc.
MAINTAINERS entry, since I do not take care of those.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  riscv: dts: starfive: Add cpu scaling for JH7110 SoC
  riscv: dts: starfive: Enable axp15060 pmic for cpufreq
  dt-bindings: interrupt-controller: sifive,plic: Sort compatible values
  dt-bindings: timer: sifive,clint: Clean up compatible value section
  riscv: dts: starfive: jh7110: Add watchdog node
  riscv: dts: starfive: jh7100: Add watchdog node
  riscv: dts: starfive: Add PMU controller node
  MAINTAINERS: exclude maintained subdirs in RISC-V misc DT entry

Link: https://lore.kernel.org/r/20230612-fasting-floss-0bc05a08bc7a@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:49:35 +02:00
Sam Protsenko
12109610a5
 		arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller 
As described in the corresponding binding documentation for
"samsung,exynos850-pmu", the "clocks" property should be used for
specifying CLKOUT mux inputs. Therefore, the clock provided to exynos850
pmu_system_controller is incorrect and should be removed. Instead of
making syscon regmap keep that clock running for PMU accesses, it should
be made always running in the clock driver, because the kernel is not
the only software accessing PMU registers on Exynos850 platform.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230308233822.31180-8-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230612180102.289745-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:48:48 +02:00
Arnd Bergmann
d0b5886bee New boards are 
- Indiedroid Nova (rk3588)
 - Add Edgeble Neural Compute Module 6B (rk3588)
 - FriendlyARM NanoPi R2C Plus (rk3328)
 - Anbernic RG353PS (rk3566)
 - Lunzn Fastrhino R66S / R68S (rk3568)
 
 The rk3588 got a lot of attention and gained support for the GIC ITS
 (needed an errata from Rockchip), timers, otp memory, saradc and sdio.
 The rk356x got support for its RGA block
 
 With all the core improvements to rk3588 support, the Rock5b got a lot
 improvements from that too, namely support for its PMIC, sd-card and
 saradc, as well as a clock-rate fix for its es8316 codec.
 Similarly the rk3588-evb1 also got support for its PMIC.
 
 The Anberic RGxx3 series got a better bluetooth compatible and updates
 to its LEDs to make them use the PWM blocks they're connected to.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmSGNgkQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgZKNCACYvQvOTfXL9HMlYQ2Fftzm3GEa9IVUVAr2
 qgKiGj+cUm9y2O7eQBl/GF+6KyCnBxjh+697lAsZtEz7M6onEi9WVjsISl2dLq7Y
 4FOMWRTbzjzdMrEfg3mUUgcoMkvGkuAV8gwMTV6VKBDEegZm2/SFGQv76NpJy8Zy
 7HewtUKNggQ2OO1z6/umsreKS5qxqcRsw37fAq+dUGtJb2v71kmvYL8aiGHpy5sK
 +fNxE1znXqcNu60btk+6iltXQ9tGlqH/lEH/gsCQ3uEgCLX9BId3vXyHPBVm9NiZ
 qfMO7DJWioTjybZ0rHWh8eSkQ/DCAd+2ZQmoLtC4s/f1EkeK7jve
 =V9LX
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEDYACgkQYKtH/8kJ
 UifxHRAAw5jJdUvdZc1YkRJ3KvO4eu5fCzUaWFobM7YhztQ+mt4v8KZ1fDsN/oME
 V9Y1tGhjqL5NSRIhTyPvMzx4+jGor9PtiXMWVd35oqPY2lEeni94p8pXMipuZ6SE
 7ifY+bioB5QX4QtmXrzrRNcD/s1mANGZCUaPcUOPyjkIc5qAVq5Eb1n/H2OuP56m
 V0gWXZB8gMibdq3tkG4shuwFTgbRd3pBNDiI1YR1M42BSOBUoIZoxg/IwP1MPgE0
 tpeG9SqANTu6pBIrlgTLozRJdyV29EeCZ+Cp+qbRKtqd4SWLf/+FyxuAEAP7wPi+
 r0ty3KaAMpFK+5zIlptDCCfTOnrgO5tweJHWfbem24nL73kFaQicT+l4b4WLh3oW
 1YPhxWktsFhzkO+2IcnBUpb2GSHvasObxvzoMep1rZzy9D0W2OfiUroUJjcAEl6b
 NJuOUSDZaGo0XLv5EuJ8A6S3/4HQIS3HkJS47bD3TxMfj8jejCTF/Q79KCDqe3ub
 EsWfjKDxBFMoTlanZy2iLnudkKIAiD/mcjHfZAHCpmSq2y0z1JC70YEICDHcp9iT
 PRmDM0A9j0+csPUQ7YKZGpLHU/+/FNsJlVxAb2GWQ82HHrIULdqyXtbMJGjlv4j9
 qCmDnhxOeMeTQcG270CAuf5LRYI9Fp5YlcIXAnk5V4+N8vCNbko=
 =QogT
 -----END PGP SIGNATURE-----

Merge tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

New boards are
- Indiedroid Nova (rk3588)
- Add Edgeble Neural Compute Module 6B (rk3588)
- FriendlyARM NanoPi R2C Plus (rk3328)
- Anbernic RG353PS (rk3566)
- Lunzn Fastrhino R66S / R68S (rk3568)

The rk3588 got a lot of attention and gained support for the GIC ITS
(needed an errata from Rockchip), timers, otp memory, saradc and sdio.
The rk356x got support for its RGA block

With all the core improvements to rk3588 support, the Rock5b got a lot
improvements from that too, namely support for its PMIC, sd-card and
saradc, as well as a clock-rate fix for its es8316 codec.
Similarly the rk3588-evb1 also got support for its PMIC.

The Anberic RGxx3 series got a better bluetooth compatible and updates
to its LEDs to make them use the PWM blocks they're connected to.

* tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
  arm64: dts: rockchip: Add saradc node to rock5b
  arm64: dts: rockchip: Fix compatible for Bluetooth on rk3566-anbernic
  arm64: dts: rockchip: Add SD card support to rock-5b
  arm64: dts: rockchip: add PMIC to rock-5b
  arm64: dts: rockchip: Assign ES8316 MCLK rate on rk3588-rock-5b
  arm64: dts: rockchip: Add Indiedroid Nova board
  dt-bindings: arm: rockchip: Add Indiedroid Nova
  dt-bindings: vendor-prefixes: add Indiedroid
  arm64: dts: rockchip: Add sdio node to rk3588
  arm64: dts: rockchip: add default pinctrl for rk3588 emmc
  arm64: dts: rockchip: Add DT node for ADC support in RK3588
  arm64: dts: rockchip: add PMIC to rk3588-evb1
  arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B IO
  arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B SoM
  arm64: dts: rockchip: Add Rockchip RK3588J
  dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6B
  arm64: dts: rockchip: Add RGA2 support to rk356x
  media: dt-bindings: media: rockchip-rga: add rockchip,rk3568-rga
  arm64: dts: rockchip: Add rk3588 OTP node
  arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus
  ...

Link: https://lore.kernel.org/r/3239799.44csPzL39Z@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:46:45 +02:00
Arnd Bergmann
6db92533d6 Qualcomm ARM32 DeviceTree updates for v6.5 
NAND support on IPQ4019 boards is restored, after a faulty node rename.
 
 On MSM8226 IMEM, PMU and RPM stats are introduced. The Huawei Watch
 gains vibrator support.
 
 On MSM8974, the LGE Nexus 5 gains vibrator support. The APQ8074
 Dragonboard marks BLSP2 BAM controlled remotely, DSI panel, audio and
 modem DSPs are enabled.
 
 On SDX65 PCIe controller and PHY are introduced, to provide endpoint
 functionality. This is enabled on the related MTP.
 
 A range of DeviceTree cleanups are also included.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmSFHnYVHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FDz0P/RJBNLaZdaKzWqkqzheR49xKS6la
 PqOW9GYUWDsqVbouithvtJswAqeQigz1R5Cq3E0Va9MfWZUdHqkkE3DLhKJJtqhU
 aYnEpX7RRVERbF985pWPPZo5MvpE5ir8aFjRQ9FMfPTHUeoGEQk6ZvKvjr6nIXVl
 7tNAJ7CoxpPx6ZyEtndYXJswz1HkLnHQgi9EF39IK8ZRJJmp/ssnBU3odU7zhjtx
 7xcBUwycNTZz6ajwt74NdWVVb03M6TGqFgCjp6jjCGPMOQ92YZKOUSDHAvDGa56c
 pqc+FktSRhyG4y3tTfXNxW7sBMSuayCPl+oGgJOvNesW/uWOjBxnpBr/n8kNSCOn
 zgiQbaUfcHxFcKlE5IxLy5zIdhm1/ZvdZdE2ZhH5StfCxPJLP96gmCS4Bybe7HEY
 XPvjARKQV19dYlT2E3WF12ikALl8TzY9SJ/oTEZ34ak1vSmzyfyE8DXH0hQvLTh4
 DWamMxO8A1+6+fmc6T6yb0+r/RpupXRhLRfvlGeR5SwJAmnRbke9l86uPzlbuj6k
 MCgivznTYOCk7uJQr8V4u3yFYGDz48D2oclt3j4js5yriSF/gE0LBsqP5so+rIHw
 D3C1TfiZkO+USvPuIQYif/YN0Uo8Bc68mKaJ0A4p0MWvJOlEu9G+1uWOAIXk/aTV
 QV0dhSC21/BfW8vy
 =Vt5J
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSD/QACgkQYKtH/8kJ
 UifuzQ//YX5LV20JXkDZ+8anKjfKPOlmff1My0vxcpweC9RWscIQN9h6AJKUUjVB
 kuDHLxhhpd7+nqiBDK4ChtHJXB3GdSvUGGK6HB5EAvfy4iEL3+1MZ3lOFOan6GxM
 USaxAJngJvWg61QwInmwH0yyylnLxXAxdBrP9sL3TNg+2pO6/9KOJkOKqc7lSh5B
 SbyR64VOTB1D3oDKSq+7xT3hXC9xI4AJBt0ITgI70NsZDVvtQGnK6Gu7wJpIlRw7
 G1tovt8T84QCMfJoDQlRbaqIjZ72kBUH+yAkn2/8M9KMJiAV8x5bQTns7MLoVmYF
 b9FNNx5llknBjYRlE2ZjdWx2XbRuJtY9JJJPObdXl7iHTqFEJ/4WWXJPBcJntNwc
 UdvtuRE4Xi+5ITLPQPLoOYrJIttUmnVG9y0yaPUnra21PDHUIW6K1VCpaQ9GqZbz
 Iy67t/SP7hO+tEntQAWXXYNW8ZqMh58rOFULftS9MIo8u2X7T1xQB930fAFhZcs5
 yVGf+Sb/nZ+MSD99aVkjnOyDv/abMKmxj/87rm7pMSd7URJY4tTmd4dfMAF1/scI
 1attHgASUukxqMYV13s59a2d6epTQhKvEFs7R/D+twV2ZFJT3A0XrFcd90sph1oy
 jTzH+U4Au0YxazYcQp1WKpGWMUzoUW//TazDdWwnBBfJ2AR1dj4=
 =mPrb
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM32 DeviceTree updates for v6.5

NAND support on IPQ4019 boards is restored, after a faulty node rename.

On MSM8226 IMEM, PMU and RPM stats are introduced. The Huawei Watch
gains vibrator support.

On MSM8974, the LGE Nexus 5 gains vibrator support. The APQ8074
Dragonboard marks BLSP2 BAM controlled remotely, DSI panel, audio and
modem DSPs are enabled.

On SDX65 PCIe controller and PHY are introduced, to provide endpoint
functionality. This is enabled on the related MTP.

A range of DeviceTree cleanups are also included.

* tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
  ARM: dts: qcom: apq8074-dragonboard: enable DSI panel
  ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
  ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled
  ARM: dts: qcom: apq8026-huawei-sturgeon: Add vibrator
  ARM: dts: qcom: msm8226: Add IMEM node
  ARM: dts: qcom: msm8226: Add rpm-stats device node
  ARM: dts: qcom: msm8226: Add PMU node
  ARM: dts: qcom: sdx65-mtp: Enable PCIe EP
  ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY
  ARM: dts: qcom: sdx65: Add support for PCIe EP
  ARM: dts: qcom: sdx65: Add support for PCIe PHY
  ARM: dts: qcom: msm8974: align WCNSS Bluetooth node name with bindings
  ARM: dts: qcom: apq8084: correct thermal sensor unit-address
  ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus
  ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus
  ARM: dts: qcom: ipq8064: align USB node names with bindings
  ARM: dts: qcom: ipq8064: correct LED node names
  ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address
  ARM: dts: qcom: ipq8064: drop leading 0 from unit-address
  ARM: dts: qcom: msm8974: correct pronto unit-address
  ...

Link: https://lore.kernel.org/r/20230611010843.2482142-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:45:40 +02:00
Arnd Bergmann
60c2f542a7 Qualcomm ARM64 DeviceTree updates for v6.5 
This introduces the RDP442 and RDP433 reference devices on IPQ5332 and
 IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574
 are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is
 added. Support for Acer Apire 1, built on the Snapdragon 7c platform is
 introduced. Fxtec Pro1X on SM6115 is added.  Lastly long floating
 support for SC8180X and the Lenovo Flex 5G, and the Primus reference
 device, has been added.
 
 On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described
 above the RDP442 board on the prior. Download mode support and various
 reserved-memory regions are also introduced on IPQ6018.
 IPQ8074 gains another SPI controller.
 
 On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog,
 qfprom, SMEM and RPM are introduced. As are support for four new board,
 mentioned above.
 
 MSM8916 gains a range of structural improvements, to better suite the
 various boards supported. Regulator constraints are corrected and their
 states are adjusted to match reality (e.g. always-on regulators marked
 as always-on). BQ Aquaris X5 gains support for front flash LED.
 
 As mentioned above, MSM8939 support is introduced with support for
 boards from Sony and Square.
 
 MSM8953 gains DMA support in I2C masters.
 
 MSM8996-based Sony Xperia boards gains description of their RGB
 notification LED.
 
 On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU,
 AOSS, watchdog and missing low-speed controllers are added. On the Ride
 platform UFS, USB and an i2c bus are enabled.
 
 iommu properties are added to QSPI on both SC7180 and SC7280. LPASS
 clocks are adjusted and MDP node cleaned up slightly, on SC7180. As
 mentioned above, support for Acer Aspire 1 is introduced.
 
 Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the
 Primus reference device has been merged.
 
 On SC8280XP ethernet is added and enabled on the automotive ride
 platform. An SDC controller is introduced and enabled on the SC8280XP
 CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB
 SuperSpeed phy is added to the Type-C graph, to enable support for
 orientation switching.
 
 Fairphone 3 gains support for its notification LED.
 
 On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains
 support for flash LED and the RB3 (DB845c) board gains support for
 bonded/dual DSI-mode, to allow 4k output.
 
 On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY
 are introduced. As mentioned above Fxtec Pro1X is introduced. On the
 QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display,
 CAN-bus and GPIO LEDs are introduced, fixed regulators are described and
 the SD-card description is corrected.
 
 Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5
 gains SD-card support, camera regulators and GPIO line names sorted out.
 
 SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5
 II gains support for hardware video accelerator.
 
 Crypto engine is introduced for SM8350 as well. The HDK gets the USB
 Type-C graph described for Superspeed orientation switching and
 DisplayPort output.
 
 On SM8450 video clock controller and crypto engine are added, missing
 opp levels are introduced and the USB Type-C graph is defined for
 orientation switching and altmode.
 
 SM8550 gains GPU and video clock controllers and missing opp levels are
 added. The WCD9385 audio codec is added for the SM8550 MTP and on the
 QRD PCIe, USB, audio display and flash LED are added.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmSFGfkVHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FeKoP/RFCA0hnqP0TGgzQq7TV1//WbVuZ
 5fxpWhSKYeb6e+oOJZdu/Xi7VwSWesZwQQkMRaEOXUpMGhtWBfLQEHc6FQiAzGkv
 h3GrOLQ1qqmfYEqDxYv4CgKjpO+w5Zx2uNOZkbRDRumT0EQ45T0hypYmRefBPq8s
 bOxNmRgY6goNZalZBb0HWvdZtfYB1tlrjVn5+rpEZb031KGhCSOH8SWx8wUdUHrj
 7EYR4EeQQsJZETiinU3F8l69eNUBwAi8TAW350A3nJj+FPZqwVhIhQKCR/bCZqXC
 U9vwcaqgYKi8rY5FR+bwJsiX4hY8W9bjq7pzrJyNvXsLtIeJ3jRnbF8z4SvNitOF
 UMOkQ9f6WrToRNSrwFhLB/ipV/TbnnE/MNzIxCwQ5W1BRYn7Tri1Ws61I/Kl1/ML
 eOWl6CSWzNW5lfkHumdOzydd4T43ECqqgNLEBTCpNRo7d/4XN/TCUK4tWJqb+4ou
 1aOG6/ujy6uhlocd0mZ1xPMDBrFNCrC4/BRj2hCmbuBE3Qs/AHHrF5LLMTkZBKHd
 Mip2gUKwqi2p4l0/KJxSSj0snrifUqU5V1QCchwcMFmt62mrfRU2u7Xoy9s7vlyP
 pbQEF/Pu91Yr5nUiBQEU77L5a9tTm0eI1iFl8GwBzZP7R46ahnAu3BQc/MXaPax/
 Z9hrTrB9y610Iuzy
 =OvdD
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSD3wACgkQYKtH/8kJ
 UidMjQ//YH19+b3UZ3O4r3sIoGTNB1rajNHCX72wwzQAdaHSMOTOUdkXradtstyp
 EPNyChMERvBGq2i16B0mEk9IiQ4y4CVwR9l3FZcaasV25RhfcGX3K1Wqxuepc1Hu
 OELo8W9Ih7rSg7paNj6YfJq1ka+AldZWPvtQG000czq59ZnUn7JvEeW7hd5BOdCJ
 O5RloIxHhLIOSyyc+sK0d3hXLjcZ8Od0Pnu/QYMzslmtc7YLaRgs0F5pxwz51k/P
 Uc+eOscCGcSHilmW7IE/IlevElg0GssyRn/BZ5121tMMKEYjEeR0EUy7I8zPaG45
 osKJQ5R7NBd2h185ZXprskd9drvQ8uwv8kxRs5GFF+cK+3PE3TtoipmBycEQROcH
 7WkQg7ffiPXT7Na+yTWqUXwnwzr/nhir7HTVx7VgBqmdUIzJKdqAbVLw/PTm0B6M
 QXUZfIS8gZFLePYwzkYqhYcTgtT6ZfEY5aN2/vpI0xyZsU0Z6nbFzPxlI+4rlDXm
 eZ7nD42RzifEqJUm7yKwGPkyY1U8rbwh4kNdaxZPk4ouB1puEYbF+Neo95MKlpRY
 ODEz0u6oVvJ2Ddg/RxFDtwB3hUXupc2qZcE92Smq4Two9wjgTkuSb3A3+8CEjXqH
 VFhBY65NxnwVEaabxE4wK9+wnLUnswza988BkkY7YrI+G8EZJL4=
 =jxMR
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 DeviceTree updates for v6.5

This introduces the RDP442 and RDP433 reference devices on IPQ5332 and
IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574
are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is
added. Support for Acer Apire 1, built on the Snapdragon 7c platform is
introduced. Fxtec Pro1X on SM6115 is added.  Lastly long floating
support for SC8180X and the Lenovo Flex 5G, and the Primus reference
device, has been added.

On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described
above the RDP442 board on the prior. Download mode support and various
reserved-memory regions are also introduced on IPQ6018.
IPQ8074 gains another SPI controller.

On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog,
qfprom, SMEM and RPM are introduced. As are support for four new board,
mentioned above.

MSM8916 gains a range of structural improvements, to better suite the
various boards supported. Regulator constraints are corrected and their
states are adjusted to match reality (e.g. always-on regulators marked
as always-on). BQ Aquaris X5 gains support for front flash LED.

As mentioned above, MSM8939 support is introduced with support for
boards from Sony and Square.

MSM8953 gains DMA support in I2C masters.

MSM8996-based Sony Xperia boards gains description of their RGB
notification LED.

On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU,
AOSS, watchdog and missing low-speed controllers are added. On the Ride
platform UFS, USB and an i2c bus are enabled.

iommu properties are added to QSPI on both SC7180 and SC7280. LPASS
clocks are adjusted and MDP node cleaned up slightly, on SC7180. As
mentioned above, support for Acer Aspire 1 is introduced.

Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the
Primus reference device has been merged.

On SC8280XP ethernet is added and enabled on the automotive ride
platform. An SDC controller is introduced and enabled on the SC8280XP
CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB
SuperSpeed phy is added to the Type-C graph, to enable support for
orientation switching.

Fairphone 3 gains support for its notification LED.

On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains
support for flash LED and the RB3 (DB845c) board gains support for
bonded/dual DSI-mode, to allow 4k output.

On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY
are introduced. As mentioned above Fxtec Pro1X is introduced. On the
QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display,
CAN-bus and GPIO LEDs are introduced, fixed regulators are described and
the SD-card description is corrected.

Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5
gains SD-card support, camera regulators and GPIO line names sorted out.

SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5
II gains support for hardware video accelerator.

Crypto engine is introduced for SM8350 as well. The HDK gets the USB
Type-C graph described for Superspeed orientation switching and
DisplayPort output.

On SM8450 video clock controller and crypto engine are added, missing
opp levels are introduced and the USB Type-C graph is defined for
orientation switching and altmode.

SM8550 gains GPU and video clock controllers and missing opp levels are
added. The WCD9385 audio codec is added for the SM8550 MTP and on the
QRD PCIe, USB, audio display and flash LED are added.

* tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits)
  arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G
  arm64: dts: qcom: sc8180x: Introduce Primus
  arm64: dts: qcom: sc8180x: Add pmics
  arm64: dts: qcom: sc8180x: Add display and gpu nodes
  arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes
  arm64: dts: qcom: sc8180x: Add PCIe instances
  arm64: dts: qcom: sc8180x: Add QUPs
  arm64: dts: qcom: sc8180x: Add thermal zones
  arm64: dts: qcom: sc8180x: Add interconnects and lmh
  arm64: dts: qcom: Introduce the SC8180x platform
  arm64: dts: qcom: msm8916: Move aliases to boards
  arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec
  arm64: dts: qcom: msm8916/39: Clean up MDSS labels
  arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl
  arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN
  arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
  arm64: dts: qcom: qrb4210-rb2: Enable USB node
  arm64: dts: qcom: sm6115: Add USB SS qmp phy node
  arm64: dts: qcom: ipq5332: add support for the RDP442 variant
  dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family
  ...

Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:43:40 +02:00
Arnd Bergmann
70cdf5e28c i.MX arm64 device tree for 6.5: 
- New board support: i.MX8MM based Emtop SoM & Baseboard, NXP i.MX8MM EVKB
   board, i.MX8MP based Gateworks Venice gw7905-2x device.
 - A series from Adam Ford to add Camera and Audio support for i.MX8M
   based Beacon boards.
 - Add Audio output support for i.MX8MP TQMa8MPxL/MBa8MPxL board.
 - Add HDMI and display support for imx8mm-evk and imx8mm-phg board.
 - Add coresight trace devices support for i.MX8MP SoC.
 - A couple of changes from Krzysztof Kozlowski to add missing cache
   properties.
 - A couple of changes from Laurent Pinchart to add CSIS and ISI devices
   for i.MX8MP SoC.
 - A series from Marek Vasut to add more devices for i.MX8MP, and enable
   SAI audio on i.MX8MP DHCOM PDK2 and PDK3.
 - Correct GSC vdd_bat data size for Gateworks Venice devices.
 - Add more device support for i.MX93, Watchdog, OCOTP, idle states, DDR
   performance monitor, etc.
 - Small and random clean-ups and device node additions.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmSEIZkUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM5FoQgAmYm6yCkd8nnQqYKDlpvPmlPhQQrg
 tL2oQ1dFpxiAK7IZEkzU1q4dcI+uzRi2WV3kZglo0GH329iaL4qVtdVK2AEpyStF
 M9ri1GXd8fuN/37ZZtse54l3qRiA+R3bOlx3Zy54LspEpQlc+NjL1mNvQ+VURWhh
 ppWGVKwRJpdZsYicLmQ9mYNpqqIpV20WLa0Y8aCPqew80vcpt7lX2BuQ2grtflDS
 TQktST5JYCwWtRORsNT/5/4qZxIEO6g39PiXU5zdViqk9Ud5Ihr2ANLX3USpKByI
 OKRWfJRgjGGbviel7GF14IXJal6HatwotaXyqY4QRr9q9srjCMe7D5fM/w==
 =8wAA
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDswACgkQYKtH/8kJ
 Uier8g//VF1OsOzJLaWBsSSd5hzbN9qx+xei+jKUf1cm2tllta0cd+ZKpcUPeQSM
 +NRyzvYR54M9jjnAGgnavTQH2pl5J/mBv4Fx9UNY+3TpMpD76TDNKYRGD+LoYbvF
 6Vj+JXbCdfQg++303PQvVeKtDhSn1K7B8A2b+oNmOJE2OJbmehwD2vlvCD+bjMNB
 dE9gACBK580VA6fafg+hskgdW1TlMLbdWK7krStOEl8RHXzovl2torAAc+MGNz4H
 uGcrJUQHRTmtayXg194mb0zPlOg1BJhtYUCEJLBwhK7H+Gtnz5SyKv4FUzs2qFzC
 YmO2Xqxl4zr0kFEek5gXipUVXCCFfSDTc9RZ56tPLtDUH++0npIAb1kxL2WVQ/b6
 fLRD5lsbMiuyIkEPMtDQwDesw0Zige4PZrL8aGg4k0HjC1Fv6ZuPeLd2ZBzVCEQU
 tplIJFf2JdnzUDXhodXftxPNzqIkAjLtp3crozQE62py2HB9PGmJr/m3/p0vnSXk
 czHPlR0G7SgT+owwe2HBAQxwamSTe+Oaxk+VJ6kYaTbDG7jaMjKlWCh+5rMSYEI7
 DL0Pp8FT/jKjmL+O9+7zojB+M7a0L2ZJJRnCBw2uplNi1AMseRXCWgATtxUO87Ts
 CHgDPfIiM27NaS+ADIpjznVObQ9wwYHNLB1Tf1w4mOtjxgJ21kQ=
 =co0D
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt64-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree for 6.5:

- New board support: i.MX8MM based Emtop SoM & Baseboard, NXP i.MX8MM EVKB
  board, i.MX8MP based Gateworks Venice gw7905-2x device.
- A series from Adam Ford to add Camera and Audio support for i.MX8M
  based Beacon boards.
- Add Audio output support for i.MX8MP TQMa8MPxL/MBa8MPxL board.
- Add HDMI and display support for imx8mm-evk and imx8mm-phg board.
- Add coresight trace devices support for i.MX8MP SoC.
- A couple of changes from Krzysztof Kozlowski to add missing cache
  properties.
- A couple of changes from Laurent Pinchart to add CSIS and ISI devices
  for i.MX8MP SoC.
- A series from Marek Vasut to add more devices for i.MX8MP, and enable
  SAI audio on i.MX8MP DHCOM PDK2 and PDK3.
- Correct GSC vdd_bat data size for Gateworks Venice devices.
- Add more device support for i.MX93, Watchdog, OCOTP, idle states, DDR
  performance monitor, etc.
- Small and random clean-ups and device node additions.

* tag 'imx-dt64-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
  arm64: dts: imx8mq: Pass address-cells/size-cells to mipi_dsi
  arm64: dts: imx8mq: Use 'dsi' as node name
  arm64: dts: imx8mp-venice-gw702x: fix GSC vdd_bat data size
  arm64: dts: imx8mq-tqma8mq-mba8mx: Remove invalid properties
  arm64: dts: imx8mq: Add missing pci property
  arm64: dts: imx8mq: Fix lcdif clocks
  arm64: dts: imx8mq: Fix lcdif compatible
  arm64: dts: imx8mp: don't initialize audio clocks from CCM node
  arm64: dts: imx8mm-venice: Fix GSC vdd_bat data size.
  arm64: dts: imx8mp: Add coresight trace components
  arm64: dts: imx93: add ddr performance monitor node
  arm64: dts: imx8mm-phg: Add display support
  arm64: dts: tqma8mqml: Add vcc supply to i2c eeproms
  arm64: dts: imx8mm-evk: Add HDMI support
  arm64: dts: imx8mn-var-som-symphony: adapt FEC pinctrl for SOMs with onboard PHY
  arm64: dts: imx8mn-var-som: add 20ms delay to ethernet regulator enable
  arm64: dts: imx8mp-msc-sm2s: Add sound card
  arm64: dts: imx8mn-beacon: Migrate sound card to simple-audio-card
  arm64: dts: imx8mp-beacon-kit: Enable WM8962 Audio CODEC
  arm64: dts: imx93: add fsl,stop-mode property to support WOL
  ...

Link: https://lore.kernel.org/r/20230610072530.418847-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:40:44 +02:00
Arnd Bergmann
f50a4e594d i.MX ARM device tree for 6.5: 
- New board support: Marantec Maveo Box.
 - Add HDMI support for TQMa6x/MBa6 board.
 - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet
   devices on imx51, imx6qdl and vf610.
 - A bunch of changes from Fabio Estevam to clean up deprecated and
   invalid properies, fix up node names to remove dt-schema warnings.
 - A series of maintenance updates for Protonic Holland boards, mostly
   on the USB subsystem configuration, thermal zones, and the naming of
   GPIO keys.
 - Update dma-apbh device node name to remove dtbs_check warnings.
 - Remove invalid nodes from fan-controller for a couple of Gateworks
   boards.
 - Small random updates and clean-ups on various boards.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmSEHHAUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM4uBQf+K+vrTJNgrc6S/B4pRvU+JMCc8ncU
 abW36M3e7ESvcIlzojJpPO/Xap0aiHaD6rsjNKvWmT8Bwp37s+gMTcGLvciEsUqR
 eT+e0ehWxKYCv3xTtjWtg2PB3cvGfDKMmMLrG8QW/eOIPHgH20z+Uw6zTDA1ssjx
 IUcDVkvpjE/OxzIfYreIMRvrCHkconrwoC+cxCzQ/7UlgKwWFoqmCmwRgORbvHR3
 nK/RTYsP1JYewBM83pywMACK2GOu/YOs6d8ey7RBrnrXOzIeDW4qtPySkuberH8U
 VAyalU1XE1bbxiaAmhe4oqx5RBAtFhu2Rt8Ob+hiCTebeXtwO5JWRv7Pww==
 =VEXO
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDjIACgkQYKtH/8kJ
 UieaXBAA3T4563BCdWdEqADiAP5yzEd98KszGqHPT10CDFBr9SnYD9lMQ4x51R+6
 Due1HJGNYg9vDfZUwmbb0Uqq6ytpES7cuLstGXpdHZ5lmsbvsG/kuLoRU/pj8efS
 uCDgObAcn0FwRicaialCqPuOIT6ISGreo0E6KB468VJgKKyM+P0R2Tmm7pPQEXFD
 0cef39UOJ8GVSueWMb5Jd9Oicd2olEDAH5REklGIHwlPvu/EDAy2UTBMNfKoxDWk
 9COPBKcPvRDeLrZVAZzw3KCqnT5FYrTTIA5BF2O3v4ps22AukA4gCrIEhLj3jSjT
 YbivS2TBmYRS1+xdj8hm87SNVAi5tQGWadv5QwLNyNX6iB7A5nsoUESLduHAJPDZ
 XVOBGdSUcFFIM0pvy8+sjryJFt3hhRTMiJ63xN+8Ci+AraMZU9x1BDvA0tMkKE6V
 32xL1CqdzZLhVcg/gMf7i3ryiNUCAFXroS65rBjd4hFbZiLKCnPXgFzJOs5CnOCt
 cavbENfGZAEKiP+3sz9a+eodKioixzWEMbWXOnJ1YVlM1UJLQHaazvJHE0cc8XuI
 /pPYRf5EaR48E/Gn+RWnEAo8NCp9FJAGCaHI1ZZWdnHxhSAujPjvEiScMkOyuZId
 06PstmBt8FAD4T6bAEDqqK6k+qGiAe+EKq5S3+EvrFjmY45eWVI=
 =Sg9p
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX ARM device tree for 6.5:

- New board support: Marantec Maveo Box.
- Add HDMI support for TQMa6x/MBa6 board.
- A series from Andrew Lunn to add phy-mode and fixed links for Ethernet
  devices on imx51, imx6qdl and vf610.
- A bunch of changes from Fabio Estevam to clean up deprecated and
  invalid properies, fix up node names to remove dt-schema warnings.
- A series of maintenance updates for Protonic Holland boards, mostly
  on the USB subsystem configuration, thermal zones, and the naming of
  GPIO keys.
- Update dma-apbh device node name to remove dtbs_check warnings.
- Remove invalid nodes from fan-controller for a couple of Gateworks
  boards.
- Small random updates and clean-ups on various boards.

* tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
  ARM: dts: imx6qdl: vicut1: rename power to power-button
  ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings
  ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port
  ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port
  ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port
  ARM: dts: imx6dl: prtmvt: fix different USB related warnings
  ARM: dts: imx6dl: alti6p: fix different USB related warnings
  ARM: dts: imx6dl: vicut1: Address USB related warnings
  ARM: dts: imx6dl: Add trip points to thermal zones on several devices
  ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node
  ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
  ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC
  ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion
  ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
  ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
  ARM: dts: imx: Use 'eeprom' as node name
  ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name
  ARM: dts: imx: Use 'pmic' as node name
  ARM: dts: imx6: Use the mux- prefix
  ARM: dts: imx7d-sdb: Allow UHS modes
  ...

Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:38:10 +02:00
Arnd Bergmann
3230271930 i.MX dt-bindings for 6.5: 
- Add vendor prefix for Emtop
 - Compatibles for Marantec Maveo Box, i.MX8MM-EVKB and GW7905-2x board.
 - Replace tab indent with spaces in fsl.yaml.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmSEF7gUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM7DzAgAjdKBpNKfX90Nu5pSBmEUAON2sW+8
 y2468G2RcUbSaWIPOCSXMtkk1Csa0Tj5tZOO8CGsoP3NQwzQQQWQ2fYA53I62YdP
 COnoD7ccV7zg8s1QZ/Y/Or1+v2bnqju2zYk0iMo84B8tz0suk9gnLz7vk8CBHklf
 OWGW9IStzV5z7mZgYdBVxuNZSdO62woOgAl6U26VpN0h2th/Mmj+YD5EYaAbdqsV
 ySPfWQkHqeG7kxhMQtO6p05ZbVVmA73usgE2/rIkbw/Dgi42ZJjv4wCu8R+lrHlg
 G/lI8CXj+HE2uUAY/AqTIBvw2wNFvTAnjunotGfr8CC9zFQPLuJ9z/FiHQ==
 =zEoj
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDg0ACgkQYKtH/8kJ
 UieaWg//QIlV3ZaYjevnV2KBrJoidMA1ZMApob/fX4ppLWk1XKx4OgJaLtEk4ALb
 Fussgjbs+ESNoyIbT4RLwMjRmienNuxPmUfvz7MpWkKk5vj69IsOpnhRRKUOfA36
 /JEVO79vth+wRQPGtzpYKMtP9/YNQv7zpgGsGzmUfKb+06vlib7Km9jG8B2O+SaJ
 3ezItEfEjJyMOwUDJ5z5ANwn+cw0LR60ysSBo3cKlVYE/YP3rJ5zQOyF5q1pNIDE
 aU/U/TAedcDjd0hot+QMKhK/lVa55aYpxrNBKtVLd6PqGZKRIBRREu9nz0rs6LRR
 OSJbvMCjU0q+goUiAlaQfkuaaDnYnrKaHlkSf6eWijE0n+SYHdrIoClGPDP23t9W
 ST7Db0Z+sv/WlCsL36aq44gT3mqZ4JOUtMfubc2H8JMRbDLC+39aWi2u1dRPMozz
 i14XYq/SPmFNAmmYwXMzV1bAZi7FIh++nx0lpBsTCnwEJaUQ7v9zqvS9Ka6iHWkT
 m8fcBqJe1NkNVe4KhThsJEVejUVDvpRPWsLKp7/cSoeCk7xLK88Io/nHdcrFDwn3
 OQqARfeTBfLzhl8V7WUKI9AZKM6wySMPD24IA1H+8mW4THCSp/HnIsol79qzrEXD
 3ws4cAGfKgsu+zvusnqZc90rO6KlNXxgjc3AOtvCWB/rXH7ZI1U=
 =Ppnn
 -----END PGP SIGNATURE-----

Merge tag 'imx-bindings-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX dt-bindings for 6.5:

- Add vendor prefix for Emtop
- Compatibles for Marantec Maveo Box, i.MX8MM-EVKB and GW7905-2x board.
- Replace tab indent with spaces in fsl.yaml.

* tag 'imx-bindings-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: Add Gateworks i.MX8M GW7905-2x board
  dt-bindings: arm: fsl: Fix syntax error
  dt-bindings: vendor-prefixes: Add Emtop
  dt-bindings: arm: fsl: Add Emtop SoM & Baseboard
  dt-bindings: arm: fsl: Add i.MX8MM-EVKB
  dt-bindings: arm: fsl: Add Marantec maveo box as a DHCOR i.MX6ULL SoM based board

Link: https://lore.kernel.org/r/20230610072530.418847-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:37:33 +02:00
Arnd Bergmann
52d38cff94 - fix DCLK clock names 
- new board ICnova A20 ADB4006
 - add D1 SPI node
 - add bluetooth node for chip board
 - add extra mmc2 pinmux to sun5i
 - add axp209 iio-hwmon node
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSPRixG1tysKC2PKM10Ba7+DO8kkwUCZIOTTQAKCRB0Ba7+DO8k
 k5xnAQC7SiKb7nM57GcvalNzvMRhpo0z0gpGvWRQS72kpIHbjgEA03DMyS88cksb
 RJj1gooMbGyrINBRQF2JmCSxDVG7fw4=
 =Ads4
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDcsACgkQYKtH/8kJ
 UidblRAAqA3rpCvxHhIFfPnANEDpPPXP8Op6XMip5usfns123mD+DqwEdPrTBkEt
 +20ikAcqPsYMxHz02LPLVX66n0QHscwNHlXzCrJpsidLAr5m3EmC0PqTYFPwixEI
 ow0MjL4JukBUnVn+p0c5K0dx56Pb+29RBsqsVR7jNM0DFVsm1CbrtfRZbGcHwNFe
 sKou+Qa+JawQa7w8T092T6ke9tDCHA666j9wJGiw7xnNVaFiBSWGhGO97VpDQ3nV
 z8cCfyugFQ34+Tbmtyzj20lAxp6dvqMG2E67E/2gpYxHSDLIiwaVwP5QaafaCjgm
 ZhgXlfHn8HCoC+JUv0X02Fp13OZrWR4XWIi1bL1QcenlaAknZ9HwiOm8F3xJJaGE
 2WBkuHs7l7x4WkWacUXir4CRU+lkSKvbHQpz38aZhI/GT97fFkzsGbJ65VGBRzdA
 68GGwbQxs/Z4Hj5Drea4f2CbY4wLHMuaJQErYncMtnbIPcQDGGiaLFRMrrLn7UFZ
 r/5wdtvyW8mWTcFkhCq63b+IutI5NBgpPNdSZc/YflPOSWenchtAaSy6OkQVEYax
 dpm9YFV5Vu/KY8HrEi2UQadEzxu6o+V4rN/BSF0UVRk267NDz1xbtLuSE7NiyCFD
 PcR2/yPLpMQeRma5F4eeeXSOtfUxxNnYJ/cClhHs891F6NpXxdo=
 =76YI
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

- fix DCLK clock names
- new board ICnova A20 ADB4006
- add D1 SPI node
- add bluetooth node for chip board
- add extra mmc2 pinmux to sun5i
- add axp209 iio-hwmon node

* tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: axp209: Add iio-hwmon node for internal temperature
  ARM: dts: sun5i: Add port E pinmux settings for mmc2
  ARM: dts: sun5i: chip: Enable bluetooth
  riscv: dts: allwinner: d1: Add SPI controllers node
  arm: dts: sunxi: Add ICnova A20 ADB4006 board
  dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding
  ARM: dts: sunxi: rename tcon's clock output

Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:36:27 +02:00
Arnd Bergmann
a9c7f8d0cf arm64: tegra: Device tree changes for v6.5-rc1 
This introduces support for the IGX Orin and Jetson Orin Nano devices
 and enables various additional features on the Jetson AGX Orin and
 Jetson Orin NX. This also enables some basic thermal support to prevent
 the devices from overheating.
 
 Support for the GPU on the Google Pixel C is enabled and various minor
 issues are fixed and cleaned up.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmSDSOsTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zobIYEACmgNyMW0vHcRRQcLo9RTqfOB0Pncy3
 BmZBU4MeebkxFsVFDMfWUyHrkptBporGkUyAWJw2RBORvrCbLj1OhW1y8V0GRl4s
 SIke/oC1834PKk5a6jmaauOYfFiHCyXzrwGnWFIYzIX+7Xn9tDsXjcJQWn1ngmJr
 xrKxp/Mp/3dsgZDaJEPhHAn9rWuGDrBMLhVK0uTAjh9Rx7cy7KE3qMVzBzp2R3Mg
 VK8vay6F2pJ3LkdozNX/Q56j77mfX7GFRPITulWblRLVRstW7g0qwrZd/jcQS74h
 2wpbJ5FdS/0pX9LBN2tgUuDtGxwXHvUl0/D4P7QyuOLpmK9CMt+mM8N7JwjErJn1
 A7A6BF6F18r+pQaqzfUaZcayrVqfwgDrFgIOOBNpvcvsCc1W6vnf0LSQOkCORY+K
 YNnCZvA81R4j0MuC8Q4j9hsdp2K0Ykdk32usAnSAM4E/pZhlwPcAFJm+EZ6Swd2Z
 eshCHVPXbIr3GJsUGhzm3bscjpD5sad500eWQrBGWRSioBEwCF+I+IXd5+v/7Xc+
 vp3NUyj4bJCCmV5OmnuaAZQMVpC3x7pXaQHCakZ9gLbGoUhf9qcS+lFWPM82tYXA
 kLn42PS9YjLCyigKdGYBiwXv3t2qQ7pm3U5WnMUY9vx6snPCa7MKIiTBQ3H9b0z3
 9tYmXmZBus1+Gg==
 =HPjl
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDWcACgkQYKtH/8kJ
 UicmYg//bu3NoTNoQrez14Q0giWmFwRAT4YOXGUVGDY8Uac+lcc077x5Z/y3b6Ho
 vmczi94COl6c14WA0wSHbl+lINAV8LkQimJPMm7kpsYObGCHfwEM3k33fz5aJW8Q
 0e1MI0r5e/9pcFpuw58sqNjNnRN1aJLgVfJshSUUtA1QrcOlT1E1dm7kzpi66Rvz
 A61l8YLWMdwvfDxLz/jWi8r9LxcPtWchLPTiNw11CwLUvWspRQXTfERwpkFbLiu1
 tBFAg6vfMWTqt08e3VhW+SeVwUq0eVuOUvS0oUI+rvIfDL1c9xUAVN+PstC8XlbB
 3kv6RoB/e3OqeRKsxEzozgz/biV201wbGmkqLo2WtUN1a8PdqKbeMSRv3yvDhU5e
 dxeCFsMk9lPw2R0QjDPYIB6P9EEWHKwhj7n+NIKtNTd+aE91eD1QlrHsC8ZLUIuA
 6cJxAhwwdjXHGt6o7eT6nHMrJw1uBVqXc9zgAdDHCWtTc3kAUmD10dhrxV8EK6Ia
 f7UVonOQh6Y1OXeEN5iRXPOCaCF6XdNU/B/VB3FhE+tiWy6lm04seTz1s19vnNtk
 DIIE4oOfl5jef+pZM97ARCRZzmqG3Tu7W7GHalQFfj0oaQ5MVusmYVuoIznydbe9
 ul+W8LyRXRWa0isZDaSQCAp1pPHMSnhDaa6HfK1Tnsx2G9XCDOo=
 =jIxj
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

arm64: tegra: Device tree changes for v6.5-rc1

This introduces support for the IGX Orin and Jetson Orin Nano devices
and enables various additional features on the Jetson AGX Orin and
Jetson Orin NX. This also enables some basic thermal support to prevent
the devices from overheating.

Support for the GPU on the Google Pixel C is enabled and various minor
issues are fixed and cleaned up.

* tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Enable thermal support on Jetson Orin Nano
  arm64: tegra: Enable thermal support on Jetson Orin NX
  arm64: tegra: Enable thermal support on Jetson AGX Orin
  arm64: tegra: Add Tegra234 thermal support
  arm64: tegra: Add a few blank lines for better readability
  arm64: tegra: Sort properties more logically
  arm64: tegra: Enable GPU on Smaug
  arm64: tegra: Add GPU power rail regulator on Smaug
  arm64: tegra: Update USB phy-name for Jetson Orin NX
  arm64: tegra: Enable USB device for Jetson AGX Orin
  arm64: tegra: Add Tegra234 pin controllers
  arm64: tegra: Support Jetson Orin Nano Developer Kit
  arm64: tegra: Add missing cache properties on Tegra210
  arm64: tegra: Fix PCIe regulator for Orin Jetson AGX
  arm64: tegra: Add CPU OPP tables and interconnects property
  arm64: tegra: Add support for IGX Orin

Link: https://lore.kernel.org/r/20230609193620.2275240-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:34:47 +02:00
Arnd Bergmann
79e4760720 dt-bindings: Changes for v6.5-rc1 
Several new modules and devices are documented and fixes incorporated
 for the Tegra234 GPIO controller pin mappings as well as the possible
 Tegra XUDC PHY connections.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmSDRNITHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoSt4D/9EUOG7X/XQwI8kFjA7FzOtUP+5ARzz
 svsnZ3SgeURmu5UskHkpZcN/9sFRTP2McsuTnsonA3n0gRX50abJwERorT2tLBBh
 uLCiNR+8fArPzjul4k+xlAzOfm9EVbkxhS3sv9zBpae8C1aLKaxZPkEeHqDB+HFS
 G1mmKMVeH/ucxjEBexMsUYTyB5So9qTyChvm1IMXeSujcHo9LA6K2EleiHygTZ2H
 ZhNA1PZJUc7PxB72Q9K3TjAno/BZi2EAieuMqxbpiLWmFEalelAr8ZD2V29rNtDg
 6fssP466SvOj1IO2yQdy8YH1l1aaJ6vzN0eJedDxqNeY5h+wzOA32LfPt98E2Vkh
 WdqOW9Lyzp7CXm+V/Q34ZYpfHEw6oYg3VAUuolEaHWi/CdRMxG5bbPAa/znr/4jp
 CsvZR4GHq4JfUbXch3oej8Pe3EjMb7Ewfh6zZDifFqz0wSMaTCVZ1c1QC5RNbnO7
 iaCQkm5L13qOfCBBrw0EEree8emA5Aurid3ZouMgm4ITHl4vZfjinyiZyKOFcLNJ
 TCVqWndsNRY8HXUw7IfJr2Liztnr69T4EJJV5T9olOaNfIA1LvKieieedFMcL8ew
 7nPOiYoD0PV7MQPJHLY+4PUCbPWY500beqq5DvjurWBlxqud0m++xDg7SGERNmLQ
 42NZY7asp5GCeA==
 =vCMx
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDSkACgkQYKtH/8kJ
 UieToQ/+MfEiT/Zi5DI5aky65/B47dU6eGFoMtmvMlRoYY5CFwDHbmw56AqGz8sc
 M5PKncJq2cdeK9LRHE1aMBeYkmRXXJw4UTpxDh75THlFYtKBwRLxnyTZLNNK/1j0
 XrIDXWQmcpZE12J4LWUb3Z+me3lyk11EcaZ5kEFZipxo0c1zBiinj0HPQoQUddyX
 +f49SJYDxmzd1RBigAO4JzcU6vbQTlqHZ/M8HUez81+N4xGRVgpQ/1P7Sdv+u65m
 I8e/B/aC6WFo2GtmNKXsNzFHTxDmxEjxF6mjMqdkJgSoD0t0Y91IMi8rUsoJhpjF
 2nRlrSUbQW9RCJjhk06jNhaon7HwN3JsYwr9M2fQG40fWWs9Ss10miup+eR6iCIg
 RVI4ZrLmDhgrZdCvoBgwUPrxUXsTxw8Ke1sQFrxNNaBnx+5GpQn6wSv+uioOMXoM
 MM36UpJ4GfLcbcoGs365cItWVjr0ZWj5DLC+i0qLFpDz79gBQOF+dF8e+a1HlVBZ
 CMn3CtWamSBgMm1KpdXFG6cpRfgFIlCTP7FgEUTtLMA1VVFKzybcVDG+Gf2FRVLk
 zA0LgGpRJLMVwu0s7EKs7PLqKfqB96eDfn3LnkQ+W6I4hxVH3INSEeAA//MgNADy
 qZzTj4ABp3M7iVEwa/XC1SrC+DGd8ij8P9aTjN6o+1zWRf9CgtA=
 =Nf/9
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-6.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

dt-bindings: Changes for v6.5-rc1

Several new modules and devices are documented and fixes incorporated
for the Tegra234 GPIO controller pin mappings as well as the possible
Tegra XUDC PHY connections.

* tag 'tegra-for-6.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: tegra: Document Jetson Orin Nano Developer Kit
  dt-bindings: tegra: Document Jetson Orin Nano
  dt-bindings: gpio: Remove FSI domain ports on Tegra234
  dt-bindings: usb: tegra-xudc: Remove extraneous PHYs
  dt-bindings: tegra: Add ICC IDs for dummy memory clients
  dt-bindings: tegra: Document compatible for IGX

Link: https://lore.kernel.org/r/20230609193620.2275240-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:33:45 +02:00
Arnd Bergmann
b1062d1971 STM32 DT for v6.5, round 1 
Highlights:
 ----------
 
 - MCU/MPU:
   - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts.
   - Fix LTDC/DSI warnings.
 
 - MPU:
   - STMP32MP15:
     - Add OTP part number and Vrefint calibration in bsec.
     - M4 hold management updated. As SMC call is deprecated,
       the service is moved on a SCMI service.
     - Add ADC internal channels (VREFINT/VDDCORE).
 
   - ST:
     - Enable ADC1&2 on STM32MP15 DKx boards.
     - Adopt generic IIO bindings on STM32MP157C ED1
     - Add supplies for OV5640 in STM32MP157C EV1
       to fix yaml validation.
     - Fix i2s bindings to match with the YAML validation (DKx boards).
 
   - DH:
     - Rearrange MAC EEPROM.
     - Rename AV96 sound card.
     - Adopt generic IIo bindings.
     - Fix audio routing.
 
   -PHYTEC:
     - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM.
       This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC,
       up to 16 MB QSPI and up to 128 GB NAND flash.
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAmSG4vUdHGFsZXhhbmRy
 ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIU4oQ/8CUQbDKstyUVvvyyh
 LuXYukVD8GMCoP5yJrpZm3kWBxQvG6LIDpALpo4C5wcuRGCUUcighYh/4cqSyMjR
 OHg27YeeasaXQG271aLlJ9/FjzZagJNW682uhwIhL14FB7sbJfh630wHdj/YOph8
 lR99AFxYomd4aVKbV8LLLk5Eb6hS9ZKRxhb8Hn1J2GlWjg1S2oHJm8WInc4QR4Xh
 J6gCvnYvN9facvQvzUu5mpWhkBF5kMT4kGhj2HWgBurZSVuxfLklcyfXETr7gSoo
 oEyHzTI1Oq9YC0nU7r+sCmWMHpVxDY02eLsDwXpEC1ww66ZNYpkB7V1C2GDsnJKV
 OFcLe9phs3yNrONia1pyyySCUV+VZIovuOl6iVh2g2ADfP4CPtq+RkAS9qPwT5j9
 SAvyfCIiYaYEVT8k+jZOP/HajLpJuWl6SOgGtk8NpP2vWCjIEJuUj5XHj5K0iei9
 8Lp2tIy1kVNHT97gG9YKEbtd2wrluE/1mff1iZIPArG0alwGNgiGTwGzesbXXjk6
 zuvDlQIwL1b8P3Pg+zKR8sawZcSS2uXZsFWO9wNVsWfQM5JUAiy52KLoygvOdgpO
 /qKyOl+QfVXJPRwQgNOMEcquzL+CHqXs2IaN3i9B3TAQ5g3il8xIY36swX2aN30P
 lxTR/D+/yQ1Cw/L+55DPKCXn2WU=
 =kf1Q
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSDJoACgkQYKtH/8kJ
 Uif9qxAAnrSnL55CNXoWGiGjhyZxw4Vscm1cBYlSHINoH4wdumRteV3Ux74SCsyy
 rlny5kIi2g5Le/EXYA0cH4GbEtXUzm+xyrPGUM7M67AStIE3es51OCoOS4JBYw34
 jv82s+rzuXUTogruS5EhkZ6NDve2Oo+sPIjdJWKhf/kV90uocrsQt7AwYs9MSs0t
 cr46LaTUqXIHYyig8TbW7bNYqZTKn+0xCLo5DSeToru1dhBNraNkATapGglv7P1q
 tcVexjf0SpsST8K7AW0R796urxrSCLBw3bFLqGodArs5N76RObcBLWasVqZPEC8q
 Uy2JAyiNGWzSPjAznUBnllCndxOd+0wqSKYkffR8jjSpYvcL0aoqi8F+Lqa+C/Dv
 I2SHA2JhAwYdKj5Zc9SGFuVcwb7ABNBi4uimjm9rwlYmKHeHzFrIh5pcROpPi3qe
 4/8YNjyx5LyvZ7su+GFGhLAi7XmhtJ7j07BuRfMJJcOdw6AxOvzvNxIZvmNN8evV
 U9r6/NXJaLw4SmhhlXTTatWnU/oxx8GvXja/tFfReotFuefBjwYYhhsjRcebtaXr
 RFEtCjtauVHdQRxsJbeuCZ56l5Sjliqg4EJ5AuOEpXf4s4Z98ZEoO5KPWWTFlwjp
 Th2zLU3pbJPqbQcp9lxN+ETBemuYhr97XrNmFpitec7kTjl/hTM=
 =kRKO
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v6.5, round 1

Highlights:
----------

- MCU/MPU:
  - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts.
  - Fix LTDC/DSI warnings.

- MPU:
  - STMP32MP15:
    - Add OTP part number and Vrefint calibration in bsec.
    - M4 hold management updated. As SMC call is deprecated,
      the service is moved on a SCMI service.
    - Add ADC internal channels (VREFINT/VDDCORE).

  - ST:
    - Enable ADC1&2 on STM32MP15 DKx boards.
    - Adopt generic IIO bindings on STM32MP157C ED1
    - Add supplies for OV5640 in STM32MP157C EV1
      to fix yaml validation.
    - Fix i2s bindings to match with the YAML validation (DKx boards).

  - DH:
    - Rearrange MAC EEPROM.
    - Rename AV96 sound card.
    - Adopt generic IIo bindings.
    - Fix audio routing.

  -PHYTEC:
    - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM.
      This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC,
      up to 16 MB QSPI and up to 128 GB NAND flash.

* tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
  ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
  ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
  ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
  ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
  ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
  ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
  ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
  ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
  ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
  ARM: dts: stm32: add vrefint calibration on stm32mp15
  ARM: dts: stm32: add adc internal channels to stm32mp15
  ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards
  ARM: dts: stm32: fix dsi warnings on stm32mp15 boards
  dt-bindings: display: st,stm32-dsi: Remove unnecessary fields
  ARM: dts: stm32: fix warnings on stm32f469-disco board
  ARM: dts: stm32: Shorten the AV96 HDMI sound card name
  ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15
  ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15
  ARM: dts: stm32: add STM32MP1-based Phytec board
  ...

Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-20 22:31:22 +02:00
Bjorn Andersson
c2951581e6 Revert "arm64: dts: adapt to LP855X bindings changes" 
commit 'ebdcfc8c42 ("arm64: dts: adapt to LP855X bindings changes")'
is a Tegra change, but was accidentally merged in the Qualcomm tree. The
change is reverted to avoid rebasing a large number of other changes.

This reverts commit ebdcfc8c42.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
 2023-06-15 08:45:29 -07:00
Tony Lindgren
a495681151 arm64: dts: ti: Unify pin group node names for make dtbs checks 
Prepare for pinctrl-single yaml binding and unify pin group node names.

Let's standardize on pin group node naming ending in -pins. As we don't
necessarily have a SoC specific compatible property for pinctrl-single.
I'd rather not add a pattern match for pins somewhere in the name for all
the users.

Trying to add matches for pins-default will be futile as on the earlier
SoCs we've already seen names like pins-sleep, pins-idle, pins-off and so
on that would need to be matched.

And as the node is a pin group, let's prefer to use naming -pins rather
than -pin as more pins may need to be added to the pin group later on.

Signed-off-by: Tony Lindgren <tony@atomide.com>
[vigneshr@ti.com: Rebase onto latest ti/next and extend to new nodes]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 20:58:38 +05:30
Francesco Dolcini
7f066473e4 arm64: dts: ti: add verdin am62 yavia 
Add Toradex Verdin AM62 Yavia.

Link: https://www.toradex.com/products/carrier-board/yavia
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230615095058.33890-6-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 20:58:38 +05:30
Francesco Dolcini
50e3424fbb arm64: dts: ti: add verdin am62 dahlia 
Add Toradex Verdin AM62 Dahlia.

Link: https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230615095058.33890-5-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 20:58:38 +05:30
Francesco Dolcini
316b80246b arm64: dts: ti: add verdin am62 
This patch adds the device tree to support Toradex Verdin AM62 a
computer on module which can be used on different carrier boards
and the Toradex Verdin Development Board carrier board.

The module consists of an TI AM62 family SoC (either AM623 or AM625), a
TPS65219 PMIC, a Gigabit Ethernet PHY, 512MB to 2GB of LPDDR4 RAM, an
eMMC, a TLA2024 ADC, an I2C EEPROM, an RX8130 RTC, and optional Parallel
RGB to MIPI DSI bridge plus an optional Bluetooth/Wi-Fi module.

Anything that is not self-contained on the module is disabled by
default.

So far there is no display nor USB role switch supported, apart of that
all the other functionalities are fine.

Link: https://developer.toradex.com/hardware/verdin-som-family/modules/verdin-am62/
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230615095058.33890-4-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 20:58:38 +05:30
Francesco Dolcini
cf04083c59 dt-bindings: arm: ti: add toradex,verdin-am62 et al. 
Add toradex,verdin-am62 for Toradex Verdin AM62 SoM, its
nonwifi and wifi variants and the carrier boards (Dahlia,
Verdin Development Board and Yavia) they may be mated in.

Link: https://developer.toradex.com/hardware/verdin-som-family/modules/verdin-am62/
Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230615095058.33890-2-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 20:58:38 +05:30
Wadim Egorov
3443c1c4ed arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625 
The phyCORE-AM62x [1] is a SoM (System on Module) featuring TI's AM62x SoC.
It can be used in combination with different carrier boards.
This module can come with different sizes and models for
DDR, eMMC, SPI NOR Flash and various SoCs from the AM62x family.

A development Kit, called phyBOARD-Lyra [2] is used as a carrier board
reference design around the AM62x SoM.

Supported features:
  * Debug UART
  * SPI NOR Flash
  * eMMC
  * 2x Ethernet
  * Micro SD card
  * I2C EEPROM
  * I2C RTC
  * GPIO Expander
  * LEDs
  * USB

For more details, see:

[1] Product page SoM: https://www.phytec.com/product/phycore-am62x
[2] Product page CB: https://www.phytec.com/product/phyboard-am62x

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230504140143.1425951-2-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 20:58:38 +05:30
Wadim Egorov
94a58c5f13 dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardware 
Add devicetree bindings for AM62x based phyCORE-AM62 SoM
and phyBOARD-Lyra RDK.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230504140143.1425951-1-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:35 +05:30
Nishanth Menon
4c3cdac195 arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename 
unit-address should not use a 0x prefix.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230424173623.477577-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:35 +05:30
Nishanth Menon
4af0332876 arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom 
Enable wakeup_i2c and use un-used pinmux. While at it, describe the
board detection eeprom present on the board.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230601183151.1000157-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:35 +05:30
Nishanth Menon
f049b541b8 arm64: dts: ti: k3-am64: Add ESM support 
Add Error Signaling Module (ESM) instances in MCU and MAIN domains.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230530185335.79942-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:35 +05:30
Nishanth Menon
a58eedd1d1 arm64: dts: ti: k3-am62: Add ESM support 
Add Error Signaling Module (ESM) instances in MCU and MAIN domains.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230530185335.79942-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:35 +05:30
Neha Malcom Francis
e3d1f27688 arm64: dts: ti: k3-j7200: Add ESM support 
Add address entry mapping ESM on J7200.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20230504080526.133149-4-n-francis@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:35 +05:30
Neha Malcom Francis
19bfd51845 arm64: dts: ti: k3-j721e: Add ESM support 
Add address entry mapping ESM on J721E.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20230504080526.133149-3-n-francis@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:35 +05:30
Neha Malcom Francis
444f312a73 dt-bindings: misc: esm: Add ESM support for TI K3 devices 
Document the binding for TI K3 ESM (Error Signaling Module) block.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230504080526.133149-2-n-francis@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:35 +05:30
Nishanth Menon
9d0350e8a4 arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom 
Enable wakeup_i2c and use un-used pinmux. While at it, describe the
board detection eeprom present on the board.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602153554.1571128-7-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:35 +05:30
Nishanth Menon
f5e9ee0b35 arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux 
Define the wakeup uart pin-mux for completeness and add explicit
muxing for mcu_uart0. This allows the device tree usage in bootloader
and firmwares that can configure the same appropriately.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602153554.1571128-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:34 +05:30
Nishanth Menon
7d9b3820d7 arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom 
Enable wakeup_i2c. While at it, describe the board detection eeprom
present on the board.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602153554.1571128-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:34 +05:30
Nishanth Menon
4c8c2471c7 arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux 
Define the wakeup uart pin-mux for completeness and add explicit
muxing for mcu_uart0. This allows the device tree usage in bootloader
and firmwares that can configure the same appropriately.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602153554.1571128-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:34 +05:30
Sinthu Raja
92fee72405 arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header 
Add pinmux required to bring out the i2c and gpios on 40-pin RPi
expansion header on the AM68 SK board.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602153554.1571128-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:34 +05:30
Sinthu Raja
6bc829ceea arm64: dts: ti: k3-j721s2: Fix wkup pinmux range 
The WKUP_PADCONFIG register region in J721S2 has multiple non-addressable
regions, accordingly split the existing wkup_pmx region as follows to avoid
the non-addressable regions and include the rest of valid WKUP_PADCONFIG
registers. Also update references to old nodes with new ones.

wkup_pmx0 -> 13 pins (WKUP_PADCONFIG 0 - 12)
wkup_pmx1 -> 11 pins (WKUP_PADCONFIG 14 - 24)
wkup_pmx2 -> 72 pins (WKUP_PADCONFIG 26 - 97)
wkup_pmx3 -> 1 pin (WKUP_PADCONFIG 100)

Fixes: b8545f9d3a ("arm64: dts: ti: Add initial support for J721S2 SoC")
Cc: <stable@vger.kernel.org> # 6.3
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Thejasvi Konduru <t-konduru@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602153554.1571128-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:24:34 +05:30
Udit Kumar
858dde8a3f arm64: dts: ti: k3-j7200: Drop SoC level aliases 
Aiases are defined at board level, so dropping from soc level

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230611111140.3189111-7-u-kumar1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:50 +05:30
Udit Kumar
c4ba159fff arm64: dts: ti: k3-j7200-common-proc-board: Define aliases at board level 
Define aliases at board level

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230611111140.3189111-6-u-kumar1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:49 +05:30
Udit Kumar
3709ea7f96 arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux 
Add main, mcu, wakeup domain  uart0 pin mux into common board file and it's
reference to uart node.

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230611111140.3189111-5-u-kumar1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:49 +05:30
Udit Kumar
7f58e2b418 arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux 
main_i2c0 pin mux was duplicated in som and common file.
So removing duplicated node from common file.

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230611111140.3189111-4-u-kumar1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:49 +05:30
Udit Kumar
03612d3846 arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads 
There are timer IO pads in the MCU domain, and in the MAIN domain. These
pads can be muxed for the related timers.

There are timer IO control registers for input and output. The registers
for CTRLMMR_TIMER*_CTRL and CTRLMMR_MCU_TIMER*_CTRL are used to control
the input. The registers for CTCTRLMMR_TIMERIO*_CTRL and
CTRLMMR_MCU_TIMERIO*_CTRL the output.

The multiplexing is documented in TRM "5.1.2.3.1.4 Timer IO Muxing Control
Registers" and "5.1.3.3.1.5 Timer IO Muxing Control Registers", and the
CASCADE_EN bit is documented in TRM "12.6.3.1 Timers Overview".

For chaining timers, the timer IO control registers also have a CASCADE_EN
input bit in the CTRLMMR_TIMER*_CTRL in the registers. The CASCADE_EN bit
muxes the previous timer output, or possibly and external TIMER_IO pad
source, to the input clock of the selected timer instance for odd numered
timers. For the even numbered timers, the CASCADE_EN bit does not do
anything. The timer cascade input routing options are shown in TRM
"Figure 12-3224. Timers Overview". For handling beyond multiplexing, the
driver support for timer cascading should be likely be handled via the
clock framework.

The MCU timer controls are also marked as reserved for
usage by the MCU firmware.

Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230611111140.3189111-3-u-kumar1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:49 +05:30
Udit Kumar
c8a28ed483 arm64: dts: ti: k3-j7200: Add general purpose timers 
There are 20 general purpose timers on j721e that can be used for
things like PWM using pwm-omap-dmtimer driver. There are also
additional ten timers in the MCU domain which are meant for MCU
firmware usage and hence marked reserved by default.

The odd numbered timers have the option of being cascaded to even
timers to create a 64 bit non-atomic counter which is racy in simple
usage, hence the clock muxes are explicitly setup to individual 32 bit
counters driven off system crystal (HFOSC) as default.

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230611111140.3189111-2-u-kumar1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:49 +05:30
Nishanth Menon
8be20986e0 arm64: dts: ti: k3-j721e: Drop SoC level aliases 
Drop the SoC level aliases as these need to be done at board level.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230601183151.1000157-10-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:49 +05:30
Nishanth Menon
ff59580bf2 arm64: dts: ti: k3-j721e-common-proc-board: Define aliases at board level 
Define the aliases at the board level instead of using generic aliases
at SoC level.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230601183151.1000157-9-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:49 +05:30
Nishanth Menon
d1a4304c14 arm64: dts: ti: k3-j721e-sk: Define aliases at board level 
Define the aliases at the board level instead of using generic aliases
at SoC level.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230601183151.1000157-8-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:49 +05:30
Nishanth Menon
4c2c99026c arm64: dts: ti: k3-j721e-beagleboneai64: Add wakeup_uart pinmux 
Define the wakeup uart pin-mux for completeness. This allows the
device tree usage in bootloader and firmwares that can configure the
same appropriately.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230601183151.1000157-7-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:49 +05:30
Nishanth Menon
b04b18ccb3 arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom 
Enable wakeup_i2c and use un-used pinmux. While at it, describe the
board detection eeprom present on the board.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230601183151.1000157-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2023-06-15 11:05:49 +05:30