The global max_connections check in ksmbd's TCP accept path counts
the newly accepted connection with atomic_inc_return(), but then
rejects the connection when the result is greater than or equal to
server_conf.max_connections.
That makes the effective limit one smaller than configured. For
example:
- max_connections=1 rejects the first connection
- max_connections=2 allows only one connection
The per-IP limit in the same function uses <= correctly because it
counts only pre-existing connections. The global limit instead checks
the post-increment total, so it should reject only when that total
exceeds the configured maximum.
Fix this by changing the comparison from >= to >, so exactly
max_connections simultaneous connections are allowed and the next one
is rejected. This matches the documented meaning of max_connections
in fs/smb/server/ksmbd_netlink.h as the "Number of maximum simultaneous
connections".
Fixes: 0d0d4680db ("ksmbd: add max connections parameter")
Cc: stable@vger.kernel.org
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ipc_validate_msg() computes the expected message size for each
response type by adding (or multiplying) attacker-controlled fields
from the daemon response to a fixed struct size in unsigned int
arithmetic. Three cases can overflow:
KSMBD_EVENT_RPC_REQUEST:
msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz;
KSMBD_EVENT_SHARE_CONFIG_REQUEST:
msg_sz = sizeof(struct ksmbd_share_config_response) +
resp->payload_sz;
KSMBD_EVENT_LOGIN_REQUEST_EXT:
msg_sz = sizeof(struct ksmbd_login_response_ext) +
resp->ngroups * sizeof(gid_t);
resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition
can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes
signed and size_t, so a negative ngroups is converted to SIZE_MAX
before the multiply. A wrapped value of msg_sz that happens to
equal entry->msg_sz bypasses the size check on the next line, and
downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz,
kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the
unverified length.
Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST
paths to detect integer overflow without constraining functional
payload size; userspace ksmbd-tools grows NDR responses in 4096-byte
chunks for calls like NetShareEnumAll, so a hard transport cap is
unworkable on the response side. For LOGIN_REQUEST_EXT, reject
resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and
report the error from ipc_validate_msg() so it fires at the IPC
boundary; with that bound the subsequent multiplication and addition
stay well below UINT_MAX. The now-redundant ngroups check and
pr_err in ksmbd_alloc_user() are removed.
This is the response-side analogue of aab98e2dbd ("ksmbd: fix
integer overflows on 32 bit systems"), which hardened the request
side.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Fixes: a77e0e02af ("ksmbd: add support for supplementary groups")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 77ffbcac4e ("smb: server: fix leak of active_num_conn in
ksmbd_tcp_new_connection()") addressed the kthread_run() failure
path. The earlier alloc_transport() == NULL path in the same
function has the same leak, is reachable pre-authentication via any
TCP connect to port 445, and was empirically reproduced on UML
(ARCH=um, v7.0-rc7): a small number of forced allocation failures
were sufficient to put ksmbd into a state where every subsequent
connection attempt was rejected for the remainder of the boot.
ksmbd_kthread_fn() increments active_num_conn before calling
ksmbd_tcp_new_connection() and discards the return value, so when
alloc_transport() returns NULL the socket is released and -ENOMEM
returned without decrementing the counter. Each such failure
permanently consumes one slot from the max_connections pool; once
cumulative failures reach the cap, atomic_inc_return() hits the
threshold on every subsequent accept and every new connection is
rejected. The counter is only reset by module reload.
An unauthenticated remote attacker can drive the server toward the
memory pressure that makes alloc_transport() fail by holding open
connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN
(0x00FFFFFF); natural transient allocation failures on a loaded
host produce the same drift more slowly.
Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the
alloc_transport() failure path, decrement active_num_conn gated on
server_conf.max_connections.
Repro details: with the patch reverted, forced alloc_transport()
NULL returns leaked counter slots and subsequent connection
attempts -- including legitimate connects issued after the
forced-fail window had closed -- were all rejected with "Limit the
maximum number of connections". With this patch applied, the same
connect sequence produces no rejections and the counter cycles
cleanly between zero and one on every accept.
Fixes: 0d0d4680db ("ksmbd: add max connections parameter")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=9ytE
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc1-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix integer underflow in encrypted read
- Four debug patches, adding a few tracepoints
- Minor update to MAINTAINERS file (preferred server URL for cifs)
- Remove the BUG_ON() calls in d_mark_tmpfile_name
* tag 'v7.1-rc1-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
MAINTAINERS: change git.samba.org to https
smb: client: fix integer underflow in receive_encrypted_read()
smb: client: add tracepoints for deferred handle caching
smb: client: add oplock level to smb3_open_done tracepoint
smb: client: add tracepoint for local lock conflicts
smb: client: add tracepoints for lock operations
vfs: get rid of BUG_ON() in d_mark_tmpfile_name()
-----BEGIN PGP SIGNATURE-----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=LN0P
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc-part1-smbdirect-fixes' of git://git.samba.org/ksmbd
Pull smbdirect updates from Steve French:
"Move smbdirect server and client code to common directory:
- temporary use of smbdirect_all_c_files.c to allow micro steps
- factor out common functions into a smbdirect.ko.
- convert cifs.ko to use smbdirect.ko
- convert ksmbd.ko to use smbdirect.ko
- let smbdirect.ko use global workqueues
- move ib_client logic from ksmbd.ko into smbdirect.ko
- remove smbdirect_all_c_files.c hack again
- some locking and teardown related fixes on top"
* tag 'v7.1-rc-part1-smbdirect-fixes' of git://git.samba.org/ksmbd: (145 commits)
smb: smbdirect: let smbdirect_connection_deregister_mr_io unlock while waiting
smb: smbdirect: fix the logic in smbdirect_socket_destroy_sync() without an error
smb: smbdirect: fix copyright header of smbdirect.h
smb: smbdirect: change smbdirect_socket_parameters.{initiator_depth,responder_resources} to __u16
smb: smbdirect: remove unused SMBDIRECT_USE_INLINE_C_FILES logic
smb: server: no longer use smbdirect_socket_set_custom_workqueue()
smb: client: no longer use smbdirect_socket_set_custom_workqueue()
smb: smbdirect: introduce global workqueues
smb: smbdirect: prepare use of dedicated workqueues for different steps
smb: smbdirect: remove unused smbdirect_connection_mr_io_recovery_work()
smb: smbdirect: wrap rdma_disconnect() in rdma_[un]lock_handler()
smb: server: make use of smbdirect_netdev_rdma_capable_mode_type()
smb: smbdirect: introduce smbdirect_netdev_rdma_capable_mode_type()
smb: server: make use of smbdirect.ko
smb: server: remove unused ksmbd_transport_ops.prepare()
smb: server: make use of smbdirect_socket_{listen,accept}()
smb: server: only use public smbdirect functions
smb: server: make use of smbdirect_socket_create_accepting()/smbdirect_socket_release()
smb: server: make use of smbdirect_{socket_init_accepting,connection_wait_for_connected}()
smb: server: make use of smbdirect_connection_send_iter() and related functions
...
-----BEGIN PGP SIGNATURE-----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=KJTH
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Add two new selftests
* tag 'livepatching-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: add test for module function patching
selftests: livepatch: test-ftrace: livepatch a traced function
- Add support for QEMU virt-ctrl, and use it for system reset and
power off on the virt platform,
- Defconfig updates,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaeCVXwAKCRCKwlD9ZEnx
cIhWAQCxwoddlBD7QRpLvcrtbrL20poOfGtf5pY3VZaohEbzzwEAlCnp0TnwuEES
gSKc5MVGDx9x6YdwyeFEX4PTU882YwI=
=kV2B
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Add support for QEMU virt-ctrl, and use it for system reset
and power off on the virt platform
- defconfig updates
- Miscellaneous fixes and improvements
* tag 'm68k-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: virt: Switch to qemu-virt-ctrl driver
power: reset: Add QEMU virt-ctrl driver
m68k: defconfig: Update defconfigs for v7.0-rc1
m68k: emu: Replace unbounded sprintf() in nfhd_init_one()
m68k: uapi: Add ucontext.h
m68k: defconfig: hp300: Enable monochrome and 16-color linux logos
m68k: q40: Remove commented out code
- Enable boot graphics resource table (BGRT) on Xen/x86
- Correct a misguided assumption in the memory attributes table sanity
check
- Start tagging efi_mem_reserve()'d regions as MEMBLOCK_RSRV_KERN
- Some other minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCad5qMAAKCRAwbglWLn0t
XKXwAPsEN7Wf8bXV0ecRTKk7TlEUYUoWWZ7Xpf/Dpee20fAFvwEAiKckvbO6jh8u
5erC3UsT6tAZb+RWXR6ct3ljBr9SuA8=
=Atcd
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Again not a busy cycle for EFI, just some minor tweaks and bug fixes:
- Enable boot graphics resource table (BGRT) on Xen/x86
- Correct a misguided assumption in the memory attributes table
sanity check
- Start tagging efi_mem_reserve()'d regions as MEMBLOCK_RSRV_KERN
- Some other minor fixes and cleanups"
* tag 'efi-next-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/capsule-loader: fix incorrect sizeof in phys array reallocation
efi: Tag memblock reservations of boot services regions as RSRV_KERN
memblock: Permit existing reserved regions to be marked RSRV_KERN
efi/memattr: Fix thinko in table size sanity check
efi: libstub: fix type of fdt 32 and 64bit variables
efi: Drop unused efi_range_is_wc() function
efi: Enable BGRT loading under Xen
efi: make efi_mem_type() and efi_mem_attributes() work on Xen PV
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices.
(Vijay Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
- Fix vfio selftest MMIO DMA mapping selftest. (Alex Mastro)
- Conversions to const struct class in support of class_create()
deprecation. (Jori Koolstra)
- Improve selftest compiler compatibility by avoiding initializer
on variable-length array. (Manish Honap)
- Define new uAPI for drivers supporting migration to advise user-
space of new initial data for reducing target startup latency.
Implemented for mlx5 vfio-pci variant driver. (Yishai Hadas)
- Enable vfio selftests on aarch64, not just cross-compiles reporting
arm64. (Ted Logan)
- Update vfio selftest driver support to include additional DSA
devices. (Yi Lai)
- Unconditionally include debugfs root pointer in vfio device struct,
avoiding a build failure seen in hisi_acc variant driver without
debugfs otherwise. (Arnd Bergmann)
- Add support for the s390 ISM (Internal Shared Memory) device via
a new variant driver. The device is unique in the size of its BAR
space (256TiB) and lack of mmap support. (Julian Ruess)
- Enforce that vfio-pci drivers implement a name in their ops
structure for use in sequestering SR-IOV VFs. (Alex Williamson)
- Prune leftover group notifier code. (Paolo Bonzini)
- Fix Xe vfio-pci variant driver to avoid migration support as a
dependency in the reset path and missing release call.
(Michał Winiarski)
-----BEGIN PGP SIGNATURE-----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=NYEM
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices (Vijay
Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
- Fix vfio selftest MMIO DMA mapping selftest (Alex Mastro)
- Conversions to const struct class in support of class_create()
deprecation (Jori Koolstra)
- Improve selftest compiler compatibility by avoiding initializer on
variable-length array (Manish Honap)
- Define new uAPI for drivers supporting migration to advise user-
space of new initial data for reducing target startup latency.
Implemented for mlx5 vfio-pci variant driver (Yishai Hadas)
- Enable vfio selftests on aarch64, not just cross-compiles reporting
arm64 (Ted Logan)
- Update vfio selftest driver support to include additional DSA devices
(Yi Lai)
- Unconditionally include debugfs root pointer in vfio device struct,
avoiding a build failure seen in hisi_acc variant driver without
debugfs otherwise (Arnd Bergmann)
- Add support for the s390 ISM (Internal Shared Memory) device via a
new variant driver. The device is unique in the size of its BAR space
(256TiB) and lack of mmap support (Julian Ruess)
- Enforce that vfio-pci drivers implement a name in their ops structure
for use in sequestering SR-IOV VFs (Alex Williamson)
- Prune leftover group notifier code (Paolo Bonzini)
- Fix Xe vfio-pci variant driver to avoid migration support as a
dependency in the reset path and missing release call (Michał
Winiarski)
* tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio: (23 commits)
vfio/xe: Add a missing vfio_pci_core_release_dev()
vfio/xe: Reorganize the init to decouple migration from reset
vfio: remove dead notifier code
vfio/pci: Require vfio_device_ops.name
MAINTAINERS: add VFIO ISM PCI DRIVER section
vfio/ism: Implement vfio_pci driver for ISM devices
vfio/pci: Rename vfio_config_do_rw() to vfio_pci_config_rw_single() and export it
vfio: unhide vdev->debug_root
vfio/qat: add support for Intel QAT 420xx VFs
vfio: selftests: Support DMR and GNR-D DSA devices
vfio: selftests: Build tests on aarch64
vfio/mlx5: Add REINIT support to VFIO_MIG_GET_PRECOPY_INFO
vfio/mlx5: consider inflight SAVE during PRE_COPY
net/mlx5: Add IFC bits for migration state
vfio: Adapt drivers to use the core helper vfio_check_precopy_ioctl
vfio: Add support for VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2
vfio: Define uAPI for re-init initial bytes during the PRE_COPY phase
vfio: selftests: Fix VLA initialisation in vfio_pci_irq_set()
vfio: uapi: fix comment typo
vfio: mdev: replace mtty_dev->vd_class with a const struct class
...
We should not hold a mutex locked during wait_for_completion()
holding a reference is enough.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If smbdirect_socket_destroy_sync() and sc->first_error was not set
we should set -ESHUTDOWN, that's a better condition
doing it only implicitly with the
sc->status < SMBDIRECT_SOCKET_DISCONNECTING check.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Everything in smbdirect.h was taken from my out of
tree prototype.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We still limit this to U8_MAX as the rdma api only uses __u8
and that's also the limit for Infiniband and RoCE*,
while iWarp would be able to support larger values at
the protocol level.
As struct smbdirect_socket_parameters will be part
of the uapi for IPPROTO_SMBDIRECT in future, change it
now even if userspace sockets won't be supported yet.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We always build as standalone module (or as part of the core kernel).
This also removes unused elements from struct smbdirect_socket
and unused exports.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smbdirect.ko has global workqueues now, so we should use these
default once.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smbdirect.ko has global workqueues now, so we should use these
default once.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
These will be used in future and callers should no
longer use smbdirect_socket_set_custom_workqueue().
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is a preparation in order to have global workqueues in
the smbdirect module instead of having the caller to
provide one.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This would actually never be used as we only move to
SMBDIRECT_MR_ERROR when we directly call
smbdirect_socket_schedule_cleanup().
Doing an ib_dereg_mr/ib_alloc_mr dance on
working connection is not needed and
it's also pointless on a broken connection
as we don't reuse any ib_pd.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This might not be needed, but it controls the order
of ib_drain_qp() and rdma_disconnect().
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This removes is basically the same logic.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically a copy of ksmbd_rdma_capable_netdev() in the
server, but this also prints a message when a device is renamed.
The differences are:
- It uses rdma_for_each_port() instead of implementing the
same logic again.
- It returns RDMA_NODE_{UNSPECIFIED,IB_CA,RNIC} values instead of bool
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This means we no longer inline the common smbdirect
.c files and use the exported functions from the
module instead.
Note the connection specific logging is still
redirect to ksmbd.ko functions via
smbdirect_socket_set_logging().
We still don't use real socket layer,
but we're very close...
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is no longer needed for smbdirect.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We no longer need the custom rdma listener.
The code logic is very similar to transport_tcp.c now
using a kernel thread that loops over smbdirect_socket_accept().
This is the first step in the direction of using IPPROTO_SMBDIRECT
sockets in future.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Also remove a lot of unused includes...
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
With this we no longer embed struct smbdirect_socket, which will allow
us to make it private in the following commits.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This means we finally only use common functions in the server.
We still use the embedded struct smbdirect_socket and are
able to access internals, but the will be removed in the
next commits as well.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This makes use of common code for sending messages, this will
allow to make more use of common code in the next commits.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This make it easier moving to common code shared with the client.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will help to move to common code in future.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smbdirect_map_sges_from_iter() already handles the case that only
a limited number of sges are available. Its return value
is data_length and the remaining bytes in the iter are
remaining_data_length.
This is now much easier and will allow us to share
more code with the client soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The point is that ib_dma_map_single() is done first, but
the 'Fill in the packet header' will be done after
smbdirect_map_sges_from_iter().
This will simplify further changes in order to
share common code with the client.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will allow us to make the code more generic in order
to move it to common with the client.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will help to share more common code soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is already used by the client too and will
help to share more common code.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically the same logic, it just operates on iov_iter_kvec()
instead of a raw buffer pointer. This allows us to use common
code between client and server.
We keep returning -EINTR instead of -ERESTARTSYS if
wait_event_interruptible() fails. I don't if this is
required, but changing it is a task for another patch.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically the same logic as before, but we now
use common code, which will also be used by the server soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The copied code only got new names, some indentation/formatting changes,
some variable names are changed too.
They also only use struct smbdirect_socket instead of
struct smb_direct_transport.
But the logic is still the same.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will allow us to share more common code between client and
server soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will allow us to move code into common code
between client and server soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically a copy of smb_direct_post_recv_credits(), but
there are several improvements compared to the existing function:
1. We calculate the number of missing posted buffers by getting the
difference between recv_io.credits.target and recv_io.posted.count.
Instead of the difference between recv_io.credits.target
and recv_io.credits.count, because recv_io.credits.count is
only updated once a message is send to the peer.
It was not really a problem before, because we have
a fixed number smbdirect_recv_io buffers, so the
loop terminated when smbdirect_connection_get_recv_io()
returns NULL.
But using recv_io.posted.count makes it easier to
understand.
2. In order to tell the peer about the newly posted buffer
and grant the credits, we only trigger the send immediate
when we're not granting only the last possible credit.
This is mostly a difference relative to the servers
smb_direct_post_recv_credits() implementation,
which should avoid useless ping pong messages.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The only difference is that smbdirect_connection_post_recv_io()
returns early if the connection is already broken.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's good a use common code for this and it will allow us
to share more code in the next steps.
Calling ib_drain_qp() twice is ok.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's good to have this logic in a central place, it will allow us
share more code soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is a copy of smb_direct_qpair_handler()...
It will allow more code to be moved to common functions
soon.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It will make it easier to move stuff into common code when
both client and server use smbdirect_map_sges_from_iter().
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This were based on smb_direct_{create,destroy}_pools() in the server.
The main logical differences are the following:
We now don't use smbdirect_connection_get_recv_io() on cleanup,
instead it uses list_for_each_entry_safe()...
We don't generate warnings if smbdirect_recv_io payload
is copied into userspace buffers. This doesn't happen
in the server anyway.
And it uses list_add_tail() just to let me feel
better when looking at the code...
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
