commit 1b83ef9f7a upstream.
With nixpkgs's rustc, rust-src component is not bundled
with the compiler by default and is instead provided from
a separate store path, so this assumption does not hold.
The assertion assumes these paths are in the same location
which causes `make LLVM=1 rust-analyzer` to fail on NixOS.
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/565284250
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
Fixes: fe99216357 ("rust: Support latest version of `rust-analyzer`")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251224135343.32476-1-work@onurozkan.dev
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6ff6e8700 upstream.
`build_assert` relies on the compiler to optimize out its error path.
Functions using it with its arguments must thus always be inlined,
otherwise the error path of `build_assert` might not be optimized out,
triggering a build error.
Cc: stable@vger.kernel.org
Fixes: bb38f35b35 ("rust: implement `kernel::sync::Refcount`")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20251208-io-build-assert-v3-5-98aded02c1ea@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd36f6e2ab upstream.
For arm32, on a x86_64 builder, running the `rusttest` target yields:
error[E0080]: evaluation of constant value failed
--> rust/kernel/static_assert.rs:37:23
|
37 | const _: () = ::core::assert!($condition $(,$arg)?);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'assertion failed: size_of::<isize>() == size_of::<isize_atomic_repr>()', rust/kernel/sync/atomic/predefine.rs:68:1
|
::: rust/kernel/sync/atomic/predefine.rs:68:1
|
68 | static_assert!(size_of::<isize>() == size_of::<isize_atomic_repr>());
| -------------------------------------------------------------------- in this macro invocation
|
= note: this error originates in the macro `::core::assert` which comes from the expansion of the macro `static_assert` (in Nightly builds, run with -Z macro-backtrace for more info)
The reason is that `rusttest` runs on the host, so for e.g. a x86_64
builder `isize` is 64 bits but it is not a `CONFIG_64BIT` build.
Fix it by providing a stub for `rusttest` as usual.
Fixes: 84c6d36bca ("rust: sync: atomic: Add Atomic<{usize,isize}>")
Cc: stable@vger.kernel.org
Reviewed-by: Onur Özkan <work@onurozkan.dev>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20260123233432.22703-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09c3c9112d upstream.
`build_assert` relies on the compiler to optimize out its error path.
Functions using it with its arguments must thus always be inlined,
otherwise the error path of `build_assert` might not be optimized out,
triggering a build error.
Cc: stable@vger.kernel.org
Fixes: cc84ef3b88 ("rust: bits: add support for bits/genmask macros")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251208-io-build-assert-v3-4-98aded02c1ea@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 426ca15c7f upstream.
This patch enhances GSO segment handling by properly checking
the SKB_GSO_DODGY flag for frag_list GSO packets, addressing
low throughput issues observed when a station accesses IPv4
servers via hotspots with an IPv6-only upstream interface.
Specifically, it fixes a bug in GSO segmentation when forwarding
GRO packets containing a frag_list. The function skb_segment_list
cannot correctly process GRO skbs that have been converted by XLAT,
since XLAT only translates the header of the head skb. Consequently,
skbs in the frag_list may remain untranslated, resulting in protocol
inconsistencies and reduced throughput.
To address this, the patch explicitly sets the SKB_GSO_DODGY flag
for GSO packets in XLAT's IPv4/IPv6 protocol translation helpers
(bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSO
packets as potentially modified after protocol translation. As a
result, GSO segmentation will avoid using skb_segment_list and
instead falls back to skb_segment for packets with the SKB_GSO_DODGY
flag. This ensures that only safe and fully translated frag_list
packets are processed by skb_segment_list, resolving protocol
inconsistencies and improving throughput when forwarding GRO packets
converted by XLAT.
Signed-off-by: Jibin Zhang <jibin.zhang@mediatek.com>
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260126152114.1211-1-jibin.zhang@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a1968bd99 upstream.
The helper for shmem swap freeing is not handling the order of swap
entries correctly. It uses xa_cmpxchg_irq to erase the swap entry, but it
gets the entry order before that using xa_get_order without lock
protection, and it may get an outdated order value if the entry is split
or changed in other ways after the xa_get_order and before the
xa_cmpxchg_irq.
And besides, the order could grow and be larger than expected, and cause
truncation to erase data beyond the end border. For example, if the
target entry and following entries are swapped in or freed, then a large
folio was added in place and swapped out, using the same entry, the
xa_cmpxchg_irq will still succeed, it's very unlikely to happen though.
To fix that, open code the Xarray cmpxchg and put the order retrieval and
value checking in the same critical section. Also, ensure the order won't
exceed the end border, skip it if the entry goes across the border.
Skipping large swap entries crosses the end border is safe here. Shmem
truncate iterates the range twice, in the first iteration,
find_lock_entries already filtered such entries, and shmem will swapin the
entries that cross the end border and partially truncate the folio (split
the folio or at least zero part of it). So in the second loop here, if we
see a swap entry that crosses the end order, it must at least have its
content erased already.
I observed random swapoff hangs and kernel panics when stress testing
ZSWAP with shmem. After applying this patch, all problems are gone.
Link: https://lkml.kernel.org/r/20260120-shmem-swap-fix-v3-1-3d33ebfbc057@tencent.com
Fixes: 809bc86517 ("mm: shmem: support large folio swap out")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 057a6f2632 upstream.
When a hugetlb folio is being poisoned again, try_memory_failure_hugetlb()
passed head pfn to kill_accessing_process(), that is not right. The
precise pfn of the poisoned page should be used in order to determine the
precise vaddr as the SIGBUS payload.
This issue has already been taken care of in the normal path, that is,
hwpoison_user_mappings(), see [1][2]. Further more, for [3] to work
correctly in the hugetlb repoisoning case, it's essential to inform VM the
precise poisoned page, not the head page.
[1] https://lkml.kernel.org/r/20231218135837.3310403-1-willy@infradead.org
[2] https://lkml.kernel.org/r/20250224211445.2663312-1-jane.chu@oracle.com
[3] https://lore.kernel.org/lkml/20251116013223.1557158-1-jiaqiyan@google.com/
Link: https://lkml.kernel.org/r/20260120232234.3462258-2-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Chris Mason <clm@meta.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: William Roche <william.roche@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0f3c0845a upstream.
commit 8b47299a41 ("mm, swap: mark swap address space ro and add context
debug check") made the swap address space read-only. It may lead to
kernel panic if arch_prepare_to_swap returns a failure under heavy memory
pressure as follows,
el1_abort+0x40/0x64
el1h_64_sync_handler+0x48/0xcc
el1h_64_sync+0x84/0x88
errseq_set+0x4c/0xb8 (P)
__filemap_set_wb_err+0x20/0xd0
shrink_folio_list+0xc20/0x11cc
evict_folios+0x1520/0x1be4
try_to_shrink_lruvec+0x27c/0x3dc
shrink_one+0x9c/0x228
shrink_node+0xb3c/0xeac
do_try_to_free_pages+0x170/0x4f0
try_to_free_pages+0x334/0x534
__alloc_pages_direct_reclaim+0x90/0x158
__alloc_pages_slowpath+0x334/0x588
__alloc_frozen_pages_noprof+0x224/0x2fc
__folio_alloc_noprof+0x14/0x64
vma_alloc_zeroed_movable_folio+0x34/0x44
do_pte_missing+0xad4/0x1040
handle_mm_fault+0x4a4/0x790
do_page_fault+0x288/0x5f8
do_translation_fault+0x38/0x54
do_mem_abort+0x54/0xa8
Restore swap address space as not ro to avoid the panic.
Link: https://lkml.kernel.org/r/20260116062535.306453-2-robin.kuo@mediatek.com
Fixes: 8b47299a41 ("mm, swap: mark swap address space ro and add context debug check")
Signed-off-by: robin.kuo <robin.kuo@mediatek.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: andrew.yang <andrew.yang@mediatek.com>
Cc: AngeloGiaocchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Mathias Brugger <matthias.bgg@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Qun-wei Lin <Qun-wei.Lin@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a148a20401 upstream.
When a newly poisoned subpage ends up in an already poisoned hugetlb
folio, 'num_poisoned_pages' is incremented, but the per node ->mf_stats is
not. Fix the inconsistency by designating action_result() to update them
both.
While at it, define __get_huge_page_for_hwpoison() return values in terms
of symbol names for better readibility. Also rename
folio_set_hugetlb_hwpoison() to hugetlb_update_hwpoison() since the
function does more than the conventional bit setting and the fact three
possible return values are expected.
Link: https://lkml.kernel.org/r/20260120232234.3462258-1-jane.chu@oracle.com
Fixes: 18f41fa616 ("mm: memory-failure: bump memory failure stats to pglist_data")
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Chris Mason <clm@meta.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: William Roche <william.roche@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 870ff19251 upstream.
Randomize the KFENCE freelist during pool initialization to make
allocation patterns less predictable. This is achieved by shuffling the
order in which metadata objects are added to the freelist using
get_random_u32_below().
Additionally, ensure the error path correctly calculates the address range
to be reset if initialization fails, as the address increment logic has
been moved to a separate loop.
Link: https://lkml.kernel.org/r/20260120161510.3289089-1-pimyn@google.com
Fixes: 0ce20dd840 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Pimyn Girgis <pimyn@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Ernesto Martnez Garca <ernesto.martinezgarcia@tugraz.at>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e159150a9 upstream.
[BUG]
There is an internal report that over 1000 processes are
waiting at the io_schedule_timeout() of balance_dirty_pages(), causing
a system hang and trigger a kernel coredump.
The kernel is v6.4 kernel based, but the root problem still applies to
any upstream kernel before v6.18.
[CAUSE]
From Jan Kara for his wisdom on the dirty page balance behavior first.
This cgroup dirty limit was what was actually playing the role here
because the cgroup had only a small amount of memory and so the dirty
limit for it was something like 16MB.
Dirty throttling is responsible for enforcing that nobody can dirty
(significantly) more dirty memory than there's dirty limit. Thus when
a task is dirtying pages it periodically enters into balance_dirty_pages()
and we let it sleep there to slow down the dirtying.
When the system is over dirty limit already (either globally or within
a cgroup of the running task), we will not let the task exit from
balance_dirty_pages() until the number of dirty pages drops below the
limit.
So in this particular case, as I already mentioned, there was a cgroup
with relatively small amount of memory and as a result with dirty limit
set at 16MB. A task from that cgroup has dirtied about 28MB worth of
pages in btrfs btree inode and these were practically the only dirty
pages in that cgroup.
So that means the only way to reduce the dirty pages of that cgroup is
to writeback the dirty pages of btrfs btree inode, and only after that
those processes can exit balance_dirty_pages().
Now back to the btrfs part, btree_writepages() is responsible for
writing back dirty btree inode pages.
The problem here is, there is a btrfs internal threshold that if the
btree inode's dirty bytes are below the 32M threshold, it will not
do any writeback.
This behavior is to batch as much metadata as possible so we won't write
back those tree blocks and then later re-COW them again for another
modification.
This internal 32MiB is higher than the existing dirty page size (28MiB),
meaning no writeback will happen, causing a deadlock between btrfs and
cgroup:
- Btrfs doesn't want to write back btree inode until more dirty pages
- Cgroup/MM doesn't want more dirty pages for btrfs btree inode
Thus any process touching that btree inode is put into sleep until
the number of dirty pages is reduced.
Thanks Jan Kara a lot for the analysis of the root cause.
[ENHANCEMENT]
Since kernel commit b55102826d ("btrfs: set AS_KERNEL_FILE on the
btree_inode"), btrfs btree inode pages will only be charged to the root
cgroup which should have a much larger limit than btrfs' 32MiB
threshold.
So it should not affect newer kernels.
But for all current LTS kernels, they are all affected by this problem,
and backporting the whole AS_KERNEL_FILE may not be a good idea.
Even for newer kernels I still think it's a good idea to get
rid of the internal threshold at btree_writepages(), since for most cases
cgroup/MM has a better view of full system memory usage than btrfs' fixed
threshold.
For internal callers using btrfs_btree_balance_dirty() since that
function is already doing internal threshold check, we don't need to
bother them.
But for external callers of btree_writepages(), just respect their
requests and write back whatever they want, ignoring the internal
btrfs threshold to avoid such deadlock on btree inode dirty page
balancing.
CC: stable@vger.kernel.org
CC: Jan Kara <jack@suse.cz>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd9e2f5b38 upstream.
Bernd has reported a lockdep splat from flexible proportions code that is
essentially complaining about the following race:
<timer fires>
run_timer_softirq - we are in softirq context
call_timer_fn
writeout_period
fprop_new_period
write_seqcount_begin(&p->sequence);
<hardirq is raised>
...
blk_mq_end_request()
blk_update_request()
ext4_end_bio()
folio_end_writeback()
__wb_writeout_add()
__fprop_add_percpu_max()
if (unlikely(max_frac < FPROP_FRAC_BASE)) {
fprop_fraction_percpu()
seq = read_seqcount_begin(&p->sequence);
- sees odd sequence so loops indefinitely
Note that a deadlock like this is only possible if the bdi has configured
maximum fraction of writeout throughput which is very rare in general but
frequent for example for FUSE bdis. To fix this problem we have to make
sure write section of the sequence counter is irqsafe.
Link: https://lkml.kernel.org/r/20260121112729.24463-2-jack@suse.cz
Fixes: a91befde35 ("lib/flex_proportions.c: remove local_irq_ops in fprop_new_period()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Bernd Schubert <bernd@bsbernd.com>
Link: https://lore.kernel.org/all/9b845a47-9aee-43dd-99bc-1a82bea00442@bsbernd.com/
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5d5ecf21f upstream.
When running this mptcp_join.sh selftest on older kernel versions not
supporting local endpoints tracking, this test fails because 3 MP_JOIN
ACKs have been received, while only 2 were expected.
It is not clear why only 2 MP_JOIN ACKs were expected on old kernel
versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on
the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is
expected in the selftests included in this kernel version, see commit
f4480eaad4 ("selftests: mptcp: add missing join check").
Switch the expected MP_JOIN ACKs to 3. While at it, move this
chk_join_nr helper out of the special condition for older kernel
versions as it is now the same as with more recent ones. Also, invert
the condition to be more logical: what's expected on newer kernel
versions having such helper first.
Fixes: d4c81bbb86 ("selftests: mptcp: join: support local endpoint being tracked or not")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ef9e3a384 upstream.
This validates the previous commit: subflow closed events should contain
an error field when a subflow got closed with an error, e.g. reset or
timeout.
For this test, the chk_evt_nr helper has been extended to check
attributes in the matched events.
In this test, the 2 subflow closed events should have an error.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-4-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8467458dfa upstream.
This validates the previous commit: subflow closed events are re-sent
with less info when the initial subflow is disconnected after an error
and each time a subflow is closed after that.
In this new test, the userspace PM is involved because that's how it was
discovered, but it is not specific to it. The initial subflow is
terminated with a RESET, and that will cause the subflow disconnect.
Then, a new subflow is initiated, but also got rejected, which cause a
second subflow closed event, but not a third one.
While at it, in case of failure to get the expected amount of events,
the events are printed.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d82809b6c5 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-2-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dccf46179d upstream.
Some subflow socket errors need to be reported to the MPTCP socket: the
initial subflow connect (MP_CAPABLE), and the ones from the fallback
sockets. The others are not propagated.
The issue is that sock_error() was used to retrieve the error, which was
also resetting the sk_err field. Because of that, when notifying the
userspace about subflow close events later on from the MPTCP worker, the
ssk->sk_err field was always 0.
Now, the error (sk_err) is only reset when propagating it to the msk.
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-3-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b47d4eea3 upstream.
A KASAN warning can be triggered when vrealloc() changes the requested
size to a value that is not aligned to KASAN_GRANULE_SIZE.
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at mm/kasan/shadow.c:174 kasan_unpoison+0x40/0x48
...
pc : kasan_unpoison+0x40/0x48
lr : __kasan_unpoison_vmalloc+0x40/0x68
Call trace:
kasan_unpoison+0x40/0x48 (P)
vrealloc_node_align_noprof+0x200/0x320
bpf_patch_insn_data+0x90/0x2f0
convert_ctx_accesses+0x8c0/0x1158
bpf_check+0x1488/0x1900
bpf_prog_load+0xd20/0x1258
__sys_bpf+0x96c/0xdf0
__arm64_sys_bpf+0x50/0xa0
invoke_syscall+0x90/0x160
Introduce a dedicated kasan_vrealloc() helper that centralizes KASAN
handling for vmalloc reallocations. The helper accounts for KASAN granule
alignment when growing or shrinking an allocation and ensures that partial
granules are handled correctly.
Use this helper from vrealloc_node_align_noprof() to fix poisoning logic.
[ryabinin.a.a@gmail.com: move kasan_enabled() check, fix build]
Link: https://lkml.kernel.org/r/20260119144509.32767-1-ryabinin.a.a@gmail.com
Link: https://lkml.kernel.org/r/20260113191516.31015-1-ryabinin.a.a@gmail.com
Fixes: d699440f58 ("mm: fix vrealloc()'s KASAN poisoning logic")
Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Reported-by: <joonki.min@samsung-slsi.corp-partner.google.com>
Closes: https://lkml.kernel.org/r/CANP3RGeuRW53vukDy7WDO3FiVgu34-xVJYkfpm08oLO3odYFrA@mail.gmail.com
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ca497be00 upstream.
Marking the whole controller as sleeping due to the pinctrl calls in the
.direction_{input,output} callbacks has the unfortunate side effect that
legitimate invocations of .get and .set, which cannot themselves sleep,
in atomic context now spew WARN()s from gpiolib.
However, as Heiko points out, the driver doing this is a bit silly to
begin with, as the pinctrl .gpio_set_direction hook doesn't even care
about the direction, the hook is only used to claim the mux. And sure
enough, the .gpio_request_enable hook exists to serve this very purpose,
so switch to that and remove the problematic business entirely.
Cc: stable@vger.kernel.org
Fixes: 20cf2aed89 ("gpio: rockchip: mark the GPIO controller as sleeping")
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/bddc0469f25843ca5ae0cf578ab3671435ae98a7.1769429546.git.robin.murphy@arm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0fcee2cfc4 upstream.
There is a race condition in nvmet_bio_done() that can cause a NULL
pointer dereference in blk_cgroup_bio_start():
1. nvmet_bio_done() is called when a bio completes
2. nvmet_req_complete() is called, which invokes req->ops->queue_response(req)
3. The queue_response callback can re-queue and re-submit the same request
4. The re-submission reuses the same inline_bio from nvmet_req
5. Meanwhile, nvmet_req_bio_put() (called after nvmet_req_complete)
invokes bio_uninit() for inline_bio, which sets bio->bi_blkg to NULL
6. The re-submitted bio enters submit_bio_noacct_nocheck()
7. blk_cgroup_bio_start() dereferences bio->bi_blkg, causing a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000028
#PF: supervisor read access in kernel mode
RIP: 0010:blk_cgroup_bio_start+0x10/0xd0
Call Trace:
submit_bio_noacct_nocheck+0x44/0x250
nvmet_bdev_execute_rw+0x254/0x370 [nvmet]
process_one_work+0x193/0x3c0
worker_thread+0x281/0x3a0
Fix this by reordering nvmet_bio_done() to call nvmet_req_bio_put()
BEFORE nvmet_req_complete(). This ensures the bio is cleaned up before
the request can be re-submitted, preventing the race condition.
Fixes: 190f4c2c86 ("nvmet: fix memory leak of bio integrity")
Cc: Dmitry Bogdanov <d.bogdanov@yadro.com>
Cc: stable@vger.kernel.org
Cc: Guangwu Zhang <guazhang@redhat.com>
Link: http://www.mail-archive.com/debian-kernel@lists.debian.org/msg146238.html
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b22ec1685 upstream.
efivar_entry_get() always returns success even if the underlying
__efivar_entry_get() fails, masking errors.
This may result in uninitialized heap memory being copied to userspace
in the efivarfs_file_read() path.
Fix it by returning the error from __efivar_entry_get().
Fixes: 2d82e6227e ("efi: vars: Move efivar caching layer into efivarfs")
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56bd3c0f74 upstream.
Earlier in the function, the ha->flt buffer is allocated with size
sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE but freed in the error
path with size SFP_DEV_SIZE.
Fixes: 84318a9f01 ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260112134326.55466-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a44bfed9df upstream.
When I enabled Rust compilation, I wanted to clean up its output, so I
used make mrproper. However, I was still able to find that
libpin_init_internal.so in the rust directory was not deleted, while
all other corresponding outputs were cleared.
Thus add it to the `MRPROPER_FILES` list.
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Chen Miao <chenmiao@openatom.club>
Fixes: d7659acca7 ("rust: add pin-init crate build infrastructure")
Cc: stable@vger.kernel.org
Acked-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Benno Lossin <lossin@kernel.org>
Link: https://patch.msgid.link/71ff222b8731e63e06059c5d8566434e508baf2b.1761876365.git.chenmiao@openatom.club
[ Fixed tags and Git author as discussed. Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d02f20a4de upstream.
In the existing implementation irq_shutdown does not mask the interrupts
in hardware. This can cause spurious interrupts from the IO expander.
Add masking to irq_shutdown to prevent spurious interrupts.
Cc: stable@vger.kernel.org
Signed-off-by: Martin Larsson <martin.larsson@actia.se>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260121125631.2758346-1-martin.larsson@actia.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4747bafaa5 upstream.
If nonemb_cmd->va fails to be allocated, free the allocation previously
made by alloc_mcc_wrb().
Fixes: 50a4b824be ("scsi: be2iscsi: Fix to make boot discovery non-blocking")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251213083643.301240-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9210f5ff63 upstream.
imx-card currently sets the slot width to the physical sample width
for I2S links. This breaks controllers that use fixed-width slots
(e.g. 32-bit FIFO words), causing the unused bits in the slot to
contain undefined data when playing 16-bit streams.
Do not override the slot width in the machine driver and let the CPU
DAI select an appropriate default instead. This matches the behavior
of simple-audio-card and avoids embedding controller-specific policy
in the machine driver.
On an i.MX8MP-based board using SAI as the I2S master with 32-bit slots,
playing 16-bit audio resulted in spurious frequencies and an incorrect
SAI data waveform, as the slot width was forced to 16 bits. After this
change, audio artifacts are eliminated and the 16-bit samples correctly
occupy the first half of the 32-bit slot, with the remaining bits padded
with zeroes.
Cc: stable@vger.kernel.org
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20260118205030.1532696-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af20ae33e7 upstream.
`rustfmt` is configured via the `.rustfmt.toml` file in the source tree,
and we apply `rustfmt` to the macro expanded sources generated by the
`.rsi` target.
However, under an `O=` pointing to an external folder (i.e. not just
a subdir), `rustfmt` will not find the file when checking the parent
folders. Since the edition is configured in this file, this can lead to
errors when it encounters newer syntax, e.g.
error: expected one of `!`, `.`, `::`, `;`, `?`, `where`, `{`, or an operator, found `"rust_minimal"`
--> samples/rust/rust_minimal.rsi:29:49
|
28 | impl ::kernel::ModuleMetadata for RustMinimal {
| - while parsing this item list starting here
29 | const NAME: &'static ::kernel::str::CStr = c"rust_minimal";
| ^^^^^^^^^^^^^^ expected one of 8 possible tokens
30 | }
| - the item list ends here
|
= note: you may be trying to write a c-string literal
= note: c-string literals require Rust 2021 or later
= help: pass `--edition 2024` to `rustc`
= note: for more on editions, read https://doc.rust-lang.org/edition-guide
A workaround is to use `RUSTFMT=n`, which is documented in the `Makefile`
help for cases where macro expanded source may happen to break `rustfmt`
for other reasons, but this is not one of those cases.
One solution would be to pass `--edition`, but we want `rustfmt` to
use the entire configuration, even if currently we essentially use the
default configuration.
Thus explicitly give the path to the config file to `rustfmt` instead.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 2f7ab1267d ("Kbuild: add Rust support")
Cc: stable@vger.kernel.org
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260115183832.46595-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45f6aed8a8 upstream.
The peek_next method's doc comment incorrectly stated it accesses the
"previous" node when it actually accesses the next node.
Fix the documentation to accurately reflect the method's behavior.
Fixes: 98c14e40e0 ("rust: rbtree: add cursor")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Hang Shu <m18080292938@163.com>
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://github.com/Rust-for-Linux/linux/issues/1205
Cc: stable@vger.kernel.org
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20251107093921.3379954-1-m18080292938@163.com
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ea05c4f75 upstream.
The COMPAT_UTS_MACHINE for riscv was incorrectly defined as "riscv".
Change it to "riscv32" to reflect the correct 32-bit compat name.
Fixes: 06d0e37236 ("riscv: compat: Add basic compat data type implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Reviewed-by: Guo Ren (Alibaba Damo Academy) <guoren@kernel.org>
Link: https://patch.msgid.link/20260127190711.2264664-1-gaohan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20e01bba2a upstream.
The list of transaction is enumerated without acquiring card lock when
processing AR response event. This causes a race condition bug when
processing AT request completion event concurrently.
This commit fixes the bug by put timer start for split transaction
expiration into the scope of lock. The value of jiffies in card structure
is referred before acquiring the lock.
Cc: stable@vger.kernel.org # v6.18
Fixes: b5725cfa41 ("firewire: core: use spin lock specific to timer for split transaction")
Reported-by: Andreas Persson <andreasp56@outlook.com>
Closes: https://github.com/alsa-project/snd-firewire-ctl-services/issues/209
Tested-by: Andreas Persson <andreasp56@outlook.com>
Link: https://lore.kernel.org/r/20260127223413.22265-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76ed27608f upstream.
In order to do a user space stacktrace the current task needs to be a user
task that has executed in user space. It use to be possible to test if a
task is a user task or not by simply checking the task_struct mm field. If
it was non NULL, it was a user task and if not it was a kernel task.
But things have changed over time, and some kernel tasks now have their
own mm field.
An idea was made to instead test PF_KTHREAD and two functions were used to
wrap this check in case it became more complex to test if a task was a
user task or not[1]. But this was rejected and the C code simply checked
the PF_KTHREAD directly.
It was later found that not all kernel threads set PF_KTHREAD. The io-uring
helpers instead set PF_USER_WORKER and this needed to be added as well.
But checking the flags is still not enough. There's a very small window
when a task exits that it frees its mm field and it is set back to NULL.
If perf were to trigger at this moment, the flags test would say its a
user space task but when perf would read the mm field it would crash with
at NULL pointer dereference.
Now there are flags that can be used to test if a task is exiting, but
they are set in areas that perf may still want to profile the user space
task (to see where it exited). The only real test is to check both the
flags and the mm field.
Instead of making this modification in every location, create a new
is_user_task() helper function that does all the tests needed to know if
it is safe to read the user space memory or not.
[1] https://lore.kernel.org/all/20250425204120.639530125@goodmis.org/
Fixes: 90942f9fac ("perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL")
Closes: https://lore.kernel.org/all/0d877e6f-41a7-4724-875d-0b0a27b8a545@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260129102821.46484722@gandalf.local.home
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fbe3abb44 upstream.
Qualcomm SC7280 and SM8350 SoCs have slightly different LPASS audio
blocks (v9.4.5 and v9.2), however the LPASS LPI pin controllers are
exactly the same. The driver for SM8350 has two issues, which can be
fixed by simply moving over to SC7280 driver which has them correct:
1. "i2s2_data_groups" listed twice GPIO12, but should have both GPIO12
and GPIO13,
2. "swr_tx_data_groups" contained GPIO5 for "swr_tx_data2" function, but
that function is also available on GPIO14, thus listing it twice is
not necessary. OTOH, GPIO5 has also "swr_rx_data1", so selecting
swr_rx_data function should not block the TX one.
Fixes: be9f6d5638 ("pinctrl: qcom: sm8350-lpass-lpi: add SM8350 LPASS TLMM")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f0d22ec60 upstream.
GPIO controller driver should typically implement the .get_direction()
callback as GPIOLIB internals may try to use it to determine the state
of a pin. Add it for the LPASS LPI driver.
Reported-by: Abel Vesa <abelvesa@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # X1E CRD
Tested-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 543467d6fe upstream.
When vm.dirtytime_expire_seconds is set to 0, wakeup_dirtytime_writeback()
schedules delayed work with a delay of 0, causing immediate execution.
The function then reschedules itself with 0 delay again, creating an
infinite busy loop that causes 100% kworker CPU usage.
Fix by:
- Only scheduling delayed work in wakeup_dirtytime_writeback() when
dirtytime_expire_interval is non-zero
- Cancelling the delayed work in dirtytime_interval_handler() when
the interval is set to 0
- Adding a guard in start_dirtytime_writeback() for defensive coding
Tested by booting kernel in QEMU with virtme-ng:
- Before fix: kworker CPU spikes to ~73%
- After fix: CPU remains at normal levels
- Setting interval back to non-zero correctly resumes writeback
Fixes: a2f4870697 ("fs: make sure the timestamps for lazytime inodes eventually get written")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220227
Signed-off-by: Laveesh Bansal <laveeshb@laveeshbansal.com>
Link: https://patch.msgid.link/20260106145059.543282-2-laveeshb@laveeshbansal.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1151354225 ]
Andrea reported the dl_server getting stuck for him. He tracked it
down to a state where dl_server_start() saw dl_defer_running==1, but
the dl_server's job is no longer valid at the time of
dl_server_start().
In the state diagram this corresponds to [4] D->A (or dl_server_stop()
due to no more runnable tasks) followed by [1], which in case of a
lapsed deadline must then be A->B.
Now our A has dl_defer_running==1, while B demands
dl_defer_running==0, therefore it must get cleared when the CBS wakeup
rules demand a replenish.
Fixes: a110a81c52 ("sched/deadline: Deferrable dl server")
Reported-by: Andrea Righi arighi@nvidia.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Andrea Righi arighi@nvidia.com
Link: https://lkml.kernel.org/r/20260123161645.2181752-1-arighi@nvidia.com
Link: https://patch.msgid.link/20260130124100.GC1079264@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2614069c59 ]
Place the notes that resulted from going through the dl_server code in a
comment.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Stable-dep-of: 1151354225 ("sched/deadline: Fix 'stuck' dl_server")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a44241b0b ]
After a successful auxiliary_device_init(), aux_dev->dev.release
(xe_nvm_release_dev()) is responsible for the kfree(nvm). When
there is failure with auxiliary_device_add(), driver will call
auxiliary_device_uninit(), which call put_device(). So that the
.release callback will be triggered to free the memory associated
with the auxiliary_device.
Move the kfree(nvm) into the auxiliary_device_init() failure path
and remove the err goto path to fix below error.
"
[ 13.232905] ==================================================================
[ 13.232911] BUG: KASAN: double-free in xe_nvm_init+0x751/0xf10 [xe]
[ 13.233112] Free of addr ffff888120635000 by task systemd-udevd/273
[ 13.233120] CPU: 8 UID: 0 PID: 273 Comm: systemd-udevd Not tainted 6.19.0-rc2-lgci-xe-kernel+ #225 PREEMPT(voluntary)
...
[ 13.233125] Call Trace:
[ 13.233126] <TASK>
[ 13.233127] dump_stack_lvl+0x7f/0xc0
[ 13.233132] print_report+0xce/0x610
[ 13.233136] ? kasan_complete_mode_report_info+0x5d/0x1e0
[ 13.233139] ? xe_nvm_init+0x751/0xf10 [xe]
...
"
v2: drop err goto path. (Alexander)
Fixes: 7926ba2143 ("drm/xe: defer free of NVM auxiliary container to device release callback")
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Brian Nguyen <brian3.nguyen@intel.com>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Suggested-by: Brian Nguyen <brian3.nguyen@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260120183239.2966782-7-shuicheng.lin@intel.com
(cherry picked from commit a3187c0c2b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1ed856c09 ]
Move pci_dev_put() after pci_dbg() to avoid using pdev after dropping its
reference.
Fixes: 2674f1ef29 ("drm/xe/configfs: Block runtime attribute changes")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260121173750.3090907-2-shuicheng.lin@intel.com
(cherry picked from commit 63b3360436)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56c430c7f0 ]
Currently, dma_alloc_from_pool() unconditionally warns and dumps a stack
trace when an allocation fails, with the message "Failed to get suitable
pool".
This conflates two distinct failure modes:
1. Configuration error: No atomic pool is available for the requested
DMA mask (a fundamental system setup issue)
2. Resource Exhaustion: A suitable pool exists but is currently full (a
recoverable runtime state)
This lack of distinction prevents drivers from using __GFP_NOWARN to
suppress error messages during temporary pressure spikes, such as when
awaiting synchronous reclaim of descriptors.
Refactor the error handling to distinguish these cases:
- If no suitable pool is found, keep the unconditional WARN regarding
the missing pool.
- If a pool was found but is exhausted, respect __GFP_NOWARN and update
the warning message to explicitly state "DMA pool exhausted".
Fixes: 9420139f51 ("dma-pool: fix coherent pool allocations for IOMMU mappings")
Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260128133554.3056582-1-s-adivi@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4da7c5c3ec ]
When a bcache device is detached, discard requests are completed
immediately. However, the I/O accounting started in
cached_dev_make_request() is not ended, leading to 100% disk
utilization reports in iostat. Add the missing bio_end_io_acct() call.
Fixes: cafe563591 ("bcache: A block layer cache")
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Acked-by: Coly Li <colyli@fnnas.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ef825dfd4 ]
Previously, bcache hijacked the bi_end_io and bi_private fields of
the incoming bio when the backing device was in a detached state.
This is fragile and breaks if the bio is needed to be processed by
other layers.
This patch transitions to using a cloned bio embedded within a private
structure. This ensures the original bio's metadata remains untouched.
Fixes: 53280e3984 ("bcache: fix improper use of bi_end_io")
Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Acked-by: Coly Li <colyli@fnnas.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 4da7c5c3ec ("bcache: fix I/O accounting leak in detached_dev_do_request")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fd17e5983 ]
When initializing the default cma region, the "cma=" kernel parameter
takes priority over a DT defined linux,cma-default region. Hence, give
the reserved_mem framework the ability to detect this so that the DT
defined cma region can skip initialization accordingly.
Signed-off-by: Oreoluwa Babatunde <oreoluwa.babatunde@oss.qualcomm.com>
Tested-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Fixes: 8a6e02d0c0 ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Fixes: 2c223f7239 ("of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()")
Link: https://lore.kernel.org/r/20251210002027.1171519-1-oreoluwa.babatunde@oss.qualcomm.com
[mszyprow: rebased onto v6.19-rc1, added fixes tags, added a stub for
cma_skip_dt_default_reserved_mem() if no CONFIG_DMA_CMA is set]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d60354ea2 ]
Currently, modules.builtin.modinfo is created with executable permissions
(0755). This is because after commit 39cfd5b121 ("kbuild: extract
modules.builtin.modinfo from vmlinux.unstripped"), modules.builtin.modinfo
is extracted from vmlinux.unstripped using objcopy. When extracting
sections, objcopy inherits attributes from the source ELF file.
Since modules.builtin.modinfo is a data file and not an executable,
it should have regular file permissions (0644). The executable bit
can trigger warnings in Debian's Lintian tool.
Explicitly remove the executable bit after generation.
Fixes: 39cfd5b121 ("kbuild: extract modules.builtin.modinfo from vmlinux.unstripped")
Signed-off-by: Ethan Zuo <yuxuan.zuo@outlook.com>
Link: https://patch.msgid.link/SY0P300MB0609F6916B24ADF65502940B9C91A@SY0P300MB0609.AUSP300.PROD.OUTLOOK.COM
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
