Eric Dumazet says:
====================
net: ethtool: make netdev_rss_key_fill() spread flows over all queues
netdev_rss_key_fill() hands drivers a uniformly random key. Because the
Toeplitz hash is linear over GF(2), a random key is singular for a given
header field and queue count with probability 1/2: flows differing only
in the low order bits of that field (such as a burst of consecutive
ephemeral ports) then cannot reach all RX queues. On one affected 16-queue
host, only 4 queues received traffic until the key was replaced.
Patch 1 synchronizes proc_do_rss_key() with netdev_rss_key_fill() using an
smp_wmb()/smp_rmb() pair and a boolean flag so readers of
/proc/sys/net/core/netdev_rss_key print zero bytes until the key is fully
populated.
Patch 2 keeps the key random but constrains 1008 of its 2048 bits so that,
at every 16-bit aligned position and for every power-of-two queue count up
to 256, consecutive values of a field ending there visit every queue once.
Applying the fixup on the 16-bit grid covers standard 2-tuple/4-tuple
hashes as well as encapsulated or bitmap-selected layouts (such as PSP
inner TCP ports at byte 78) without enumerating them in the core. The
fixup is a bijection onto the set of valid keys, and redraws in the ~1 in
5 case where two 32-bit windows a multiple of 8 bits apart alias.
Patch 3 adds RSS key, indirection table, and flow-hash reporting to
netdevsim so the selftest can exercise both the host key and ethtool
netlink RSS reporting in a virtual machine without hardware.
Patch 4 adds a selftest under tools/testing/selftests/drivers/net/rss_key.py
checking /proc/sys/net/core/netdev_rss_key and the live RSS key,
indirection table, and flow-hash layouts reported by a device via ethtool
netlink.
====================
Link: https://patch.msgid.link/20260922163458.3900996-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest under tools/testing/selftests/drivers/net/rss_key.py
checking both the host RSS key (/proc/sys/net/core/netdev_rss_key) and
the RSS key, indirection table, and flow-hash layouts reported by a
device over ethtool netlink.
When invoked without NETIF, NetDrvEnv creates a 4-queue netdevsim device,
which calls netdev_rss_key_fill() and allows exercising both the host key
and the netlink RSS reporting path in a virtual machine without special
hardware. When invoked with NETIF, it checks the key and indirection
table of that interface.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260922163458.3900996-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initialize a per-device RSS key in nsim_ethtool_init() using
netdev_rss_key_fill() and wire up get_rxfh_key_size, get_rxfh_indir_size,
get_rxfh, and get_rxfh_fields on nsim_ethtool_ops.
This allows RSS selftests under tools/testing/selftests/drivers/net/ to
exercise both /proc/sys/net/core/netdev_rss_key and ethtool netlink RSS
reporting against netdevsim without requiring physical hardware.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260922163458.3900996-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_rss_key_fill() returns a key made of uniformly random bytes. That
is not enough, because the Toeplitz hash is linear over GF(2).
Walking the hash input MSB first, each set bit contributes a 32-bit
sliding window of the key, and hardware indexes the indirection table with
the low order bits of the result. Only the tail of each window therefore
reaches the queue index:
v(i) = key bits [i + 32 - q .. i + 31]
with q = log2(number of RX queues). Consecutive input bits give windows
overlapping in q - 1 positions, so the q vectors belonging to the q lowest
bits of a header field form a Toeplitz matrix built from 2 * q - 1 key
bits, rather than q * q independent ones. Over GF(2) a random Toeplitz
matrix is singular with probability exactly 1/2, whatever its size.
When it is singular, flows differing only in the low order bits of that
field cannot reach all the queues. This is not theoretical: a burst of
connections draws ephemeral ports from a narrow range, and on one affected
host only 4 of the 16 RX queues received any traffic at all, until its key
was replaced.
Keep drawing the key at random, since it is a secret that stops a remote
attacker from steering flows onto a single queue, but force the handful of
bits that decide this. Writing d[t] for key bit (lsb + 31 - t), where lsb
is the position of the least significant bit of a field in the hash input,
the matrices of all the q values up to 8 are non singular if and only if
d[2 * i] = 1 ^ d[i] ^ d[i + 1] ^ ... ^ d[2 * i - 1]
The odd positions stay free, so this is a one pass fixup rather than a
search. It is in fact a bijection from those free positions onto the set
of the values having the property, so the key stays uniformly distributed
over that set and the whole cost is 8 bits of entropy per position.
Searching for such a key by rejection would not have been an option: a
freshly drawn one has the property everywhere with probability 2^-1008.
Apply this at every 16-bit aligned position of the key, rather than at the
offsets of the 2-tuple and 4-tuple layouts only. The core does not get to
know what a given NIC hashes. Hardware may select the bytes it feeds to
Toeplitz out of a header window with a bitmap, and hash an encapsulated
header: for PSP over UDP over IPv6 it can pick the outer addresses and the
inner TCP ports, which sit 78 bytes into the frame and read key bits well
past the 40 bytes an IPv6 4-tuple needs. Hashed fields are 16 bits wide at
the smallest and are not expected to straddle that grid, so covering the
grid covers the layouts that were never written down, at no cost in code.
This spends 8 bits of entropy per position, 1008 bits out of the 2048 bits
of netdev_rss_key, leaving 1040 bits. 8 is also the largest usable bound,
as each q constrains 2 * q - 1 bits and anything larger would make the
ranges of two adjacent positions overlap.
What the fixup leaves behind is visible structure: 8 of every 16 bits are
derived from the 8 others, so a 16-bit aligned word of the key takes only
2^8 values and about 27 of the 128 words of netdev_rss_key duplicate
another one. That much is forced rather than an artefact of this
implementation, 1040 bits spread over 128 words being a little over 8 bits
each, but it has one consequence worth removing. Two 32-bit windows a
whole number of words apart now collide with probability 2^-16 instead of
2^-32, and two input bits reading the same window are indistinguishable to
the hash, since flipping both of them leaves it unchanged. Over 500 keys,
23% of them had such a pair, where a uniformly random key has one with
probability 2^-11.
So draw another key when that happens. Four out of five pass. Which
distances to look at follows from where the structure is: covering the
multiples of 16 leaves 1.2e-3 expected colliding pairs per key, still 2.6
times the 4.6e-4 of a plain random key, and almost all of that excess sits
at a distance of 8 modulo 16. Covering every multiple of 8 brings the total
down to 4.2e-4, below what a plain random key gives over all distances, and
within a few percent of the 4.0e-4 it gives over the distances that are
left.
Two windows a multiple of 8 bits apart are two windows at the same offset
modulo 8, so this is a handful of pairwise sweeps rather than one pass over
the key per distance. DO_ONCE() runs the generator under a spinlock with
hard IRQs disabled, so keep the windows of a class in an array rather than
recomputing both sides of every pair: 116 us instead of 254 us for the
worst case, a 2048-bit key with no collision anywhere, at a cost of 512
bytes of stack.
The shared key is fixed up once and every driver prefix inherits both
properties. Move netdev_rss_key and netdev_rss_key_fill() from
net/ethtool/ioctl.c to net/ethtool/common.c, and move the netdev_rss_key
declaration out of include/linux/netdevice.h into net/core/dev.h.
Checked against an independent Toeplitz implementation: for every 16-bit
aligned position and every q in 1..8, an aligned block of 2^q consecutive
values of a field ending there lands on the 2^q queues exactly once each.
Over 20 random keys that is 20160 checks, which 50.1% of plain random keys
fail and none of the generated keys do, for an average of 502 rewritten
bits out of 2048.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260922163458.3900996-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
proc_do_rss_key() reads netdev_rss_key[] without synchronization, so a
concurrent reader of /proc/sys/net/core/netdev_rss_key can observe a
partially populated key while netdev_rss_key_fill() is initializing it.
Publish a boolean flag after an smp_wmb() once netdev_rss_key_fill() has
populated netdev_rss_key[], and pair it with an smp_rmb() in
proc_do_rss_key(), printing zero bytes until the flag is set.
Fixes: 960fb622f8 ("net: provide a per host RSS key generic infrastructure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260922163458.3900996-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Every week in this release is record-setting for number of posted
patches. It doesn't seem like we're creating any regressions with
all these fixes, 3 Fixes tags here point to 7.2 commits but none
are true regression fixes. We're trying to keep the count down,
nonetheless.
Previous releases - regressions:
- net: don't require the hwtstamp NDOs when a PHY provides timestamping
- ipv6: fix dst leak for uncached routes
- vrf: stop corrupting skb->csum when capturing CHECKSUM_COMPLETE
packets
Previous releases - always broken:
- packet: use ubuf_info completion for TX_RING packets
- arp: terminate device name before lookup
- ipv6: do not let ipv6_find_hdr() return an offset past the packet end
- udp: remove a disconnected socket from the 4-tuple hash table
- sctp: discard the rest of the packet on a stale-cookie error
- eth: mlx5: Bridge, fix remaining switchdev ownership gaps on merged
eswitch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YiiK
-----END PGP SIGNATURE-----
Merge tag 'net-7.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, NFC and Netfilter.
Every week in this release is record-setting for number of posted
patches. It doesn't seem like we're creating any regressions with all
these fixes, three 'Fixes' tags here point to 7.2 commits but none are
true regression fixes. We're trying to keep the count down,
nonetheless.
Previous releases - regressions:
- net: don't require the hwtstamp NDOs when a PHY provides
timestamping
- ipv6: fix dst leak for uncached routes
- vrf: stop corrupting skb->csum when capturing CHECKSUM_COMPLETE
packets
Previous releases - always broken:
- packet: use ubuf_info completion for TX_RING packets
- arp: terminate device name before lookup
- ipv6: do not let ipv6_find_hdr() return an offset past the packet
end
- udp: remove a disconnected socket from the 4-tuple hash table
- sctp: discard the rest of the packet on a stale-cookie error
- eth: mlx5: Bridge, fix remaining switchdev ownership gaps on merged
eswitch"
[ And lots of other random network driver fixes ]
* tag 'net-7.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (189 commits)
tcp: prevent collapsing skbs across boundary in rtx queue
vlan: ensure sufficient headroom in vlan_dev_hard_header()
net/sched: sch_teql: fix shadowed err in __teql_resolve()
bridge: check llc_mac_hdr_init() return value in br_send_bpdu()
llc: fix skb UAF and leaks on llc_mac_hdr_init() failure
llc: reserve device headroom for allocated frames
gve: DQO: reject TSO packets with an out of range MSS
gve: fix TX drop when GSO MSS is too small for hw
gve: DQO: fix header length used by gve_can_send_tso() for UDP GSO
net: flush skb_defer_nodes in dev_cpu_dead()
net: ethernet: stmmac: dwmac-rk: fix bulk clock leak when the PHY clock fails
af_packet: fix integer overflow in prb_calc_retire_blk_tmo()
tipc: Fix a data race on mon->peer_cnt in mon_timeout()
net: phy: intel-xway: workaround 100BASE-TX Link-Up issue
net/smc: fix UAF on lgr list traversal in smcr_port_err()
net/rds: size a connection's path set by the transport it ends up with
nfp: hold IPsec RX state under the XArray lock
net: ena: fix MMIO read buffer leak on probe failure
net: ena: fix PHC cleanup on probe failure
net/sched: act_ct: fix helper UAF due to extensions realloc
...
tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on
tcp_write_queue_tail(sk) to prevent skbs queued after a switch to
device encryption from being collapsed into earlier skbs.
The fence is a no-op if all earlier data has already been transmitted
when the switch happens: sk->sk_write_queue is empty. The not yet
acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0.
On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or
tcp_shift_skb_data() can then merge an skb queued after the switch into
one queued before it.
Both users of the fence are affected:
- psp: devices only encrypt skbs with skb->decrypted set. The merged skb
keeps decrypted = 0 from the earlier skb, so merged data sent after
psp_sock_assoc_set_tx() is retransmitted in cleartext.
- tls device offload: the merged skb straddles the start marker set in
tls_set_device_offload(). The software fallback (fill_sg_in() returns
-EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an
skb and drop it. Every retransmit rebuilds the same skb, so the
connection stalls.
Fix this in two places, for defense in depth:
1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence()
when tcp_write_queue_tail(sk) is NULL.
2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as
tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both
collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this
condition.
Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260924154427.953800-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
vlan: ensure sufficient headroom in vlan_dev_hard_header()
Callers that only reserve ETH_HLEN or less, or skbs allocated before
dynamic device/headroom changes (such as toggling VLAN_FLAG_REORDER_HDR
or bonding/team switching slaves), can reach vlan_dev_hard_header() with
insufficient headroom and trigger skb_under_panic().
When vlan_dev_hard_header() returns -ENOMEM upon skb_cow_head() failure,
a few callers of dev_hard_header() / llc_mac_hdr_init() had pre-existing
error-handling bugs:
====================
Link: https://patch.msgid.link/20260924082951.1599377-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Callers that only reserve ETH_HLEN or less (such as llc_alloc_frame()),
or skbs allocated before dynamic device/headroom changes (e.g. toggling
VLAN_FLAG_REORDER_HDR or bonding/team switching slaves), can reach
vlan_dev_hard_header() with insufficient headroom and trigger
skb_under_panic().
Use skb_cow_head() in vlan_dev_hard_header() when VLAN_FLAG_REORDER_HDR
is not set to ensure sufficient headroom for the VLAN header(s) and the
underlying device hard header.
Use READ_ONCE() to read dev->hard_header_len and dev->needed_headroom as
they can be updated concurrently under RTNL (e.g. in
vlan_transfer_features()) while vlan_dev_hard_header() runs locklessly on
the transmit path. Also avoid LL_RESERVED_SPACE(dev) here so that the
extra HH_DATA_MOD alignment padding does not trigger unnecessary
pskb_expand_head() reallocations on inner stacked VLAN devices after the
outer VLAN header has been pushed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Zixuan Chai <petalzu987@gmail.com>
Closes: https://lore.kernel.org/netdev/cover.1789987105.git.petalzu987@gmail.com/
Link: https://lore.kernel.org/netdev/179022851638.2160803.1808206741379444999@kernel.org/
Cc: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260924082951.1599377-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__teql_resolve() declares an inner 'int err;' inside the
'if (neigh_event_send(n, skb_res) == 0)' block, shadowing the outer
'int err = 0;'. As a result, a negative return from dev_hard_header()
is written to the inner variable and __teql_resolve() still returns 0.
Remove the shadowed variable and set the outer err to -EINVAL when
dev_hard_header() returns a negative error.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Closes: https://lore.kernel.org/netdev/179022851638.2160803.1808206741379444999@kernel.org/
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260924082951.1599377-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(), if llc_mac_hdr_init()
fails, kfree_skb(skb) is called instead of kfree_skb(nskb). This leaks
the newly allocated nskb, reads from the freed skb via LLC_I_GET_NR(pdu),
and double-frees skb when llc_conn_state_process() drops its reference.
In llc_sap_action_send_xid_r() and llc_sap_action_send_test_r(), nskb is
leaked if llc_mac_hdr_init() returns an error.
Free nskb in all three error paths.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Closes: https://lore.kernel.org/netdev/179022851638.2160803.1808206741379444999@kernel.org/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260924082951.1599377-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
llc_alloc_frame() reserves link-layer headroom using the device type.
This is insufficient for stacked Ethernet devices such as VLAN devices,
where vlan_dev_hard_header() pushes a VLAN header before the lower
device's Ethernet header. An LLC response on such a device can
therefore underflow skb headroom in eth_header().
Use LL_RESERVED_SPACE() to account for the device's actual required
headroom while preserving the existing LLC device-type check.
Fixes: bf9ae5386b ("llc: use dev_hard_header")
Cc: stable@vger.kernel.org
Reported-by: VEGA <vega@nebusec.ai>
Signed-off-by: Zixuan Chai <petalzu987@gmail.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260924012613.2533934-1-weir@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
gve: DQO: fix handling of out of range TSO MSS
The DQO TX path assumes that the MSS of a TSO packet is within the
range supported by the device, [88, 9728].
This holds for locally generated traffic, but not for packets coming
from a tap or from a packet socket: virtio_net_hdr_to_skb() takes
gso_size from user space and only enforces a minimum, layer 2
forwarding does not check the MTU of GSO packets, and
gso_features_check() bounds skb->len and gso_segs but never gso_size.
Patch 1, from Eddie Phillips, deals with the lower bound. It moves the
existing test out of gve_prep_tso() into gve_features_check_dqo(), so
that these packets are segmented in software instead of being dropped.
Patch 2 deals with the upper bound, which is currently not checked at
all. gve_tx_fill_tso_ctx_desc() stores gso_size into a 14 bits wide
field, so that an MSS of 16384 silently becomes zero. Falling back to
software segmentation is not an option here, because skb_segment()
splits at gso_size regardless of the MTU, and would only replace an
invalid TSO packet by non TSO packets larger than the 9728 bytes the
device supports. These packets are dropped instead.
As noted in patch 2, oversized non TSO packets can still reach the
device whenever the stack segments in software. This is not specific
to gve and is better fixed in the core, so a patch for
__is_skb_forwardable() will be sent separately for net-next.
====================
Link: https://patch.msgid.link/20260924004252.1196328-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gve_prep_tso() notes that the device requires the MSS to be <= 9728,
but does not enforce it, assuming the 9K MTU enforced by the hypervisor
and the 64KB limit on TSO sizes are enough.
This does not hold for packets that were not generated locally.
A guest behind a tap, or any packet socket user, can provide an
arbitrary gso_size in virtio_net_hdr. Layer 2 forwarding does not check
the MTU for GSO packets (is_skb_forwardable()), and gso_features_check()
only bounds skb->len and gso_segs, never gso_size.
Such a packet reaches gve_tx_fill_tso_ctx_desc(), which puts gso_size
into the mss field of the TSO context descriptor. This field is 14 bits
wide, so a gso_size of 16384 is silently turned into an MSS of zero.
Drop these packets from gve_prep_tso(), and make sure that
gve_features_check_dqo() leaves their GSO bits alone: skb_segment()
splits at gso_size regardless of the MTU, so falling back to software
segmentation would give the device non TSO packets bigger than the
9728 bytes it supports.
Note that the device can still be given oversized non TSO packets when
the stack segments in software for other reasons, for instance after
TSO has been disabled with ethtool. This is a generic issue, because
the MTU check is skipped for GSO packets in the forwarding path, and
is addressed separately.
Fixes: a57e5de476 ("gve: DQO: Add TX path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260924004252.1196328-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The device has a strict requirement that the minimum MSS
(gso_size) for TSO/GSO packets must be at least 88 bytes. If a packet
below this threshold is pushed to the hardware, it can cause
hardware to silently drop the packet, leading to increased latency
and retransmissions.
Currently, this is validated too late in the transmit pipeline
(gve_prep_tso), leading to silent drops.
Fix this by moving the validation into the .ndo_features_check
callback (gve_features_check_dqo). If we detect a GSO packet with
a gso_size smaller than GVE_TX_MIN_TSO_MSS_DQO, we clear the GSO
feature flags for this packet.
Fixes: a57e5de476 ("gve: DQO: Add TX path")
Signed-off-by: Eddie Phillips <eddiephillips@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260924004252.1196328-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCarVI0xAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSEVgA+gNbC9CVCbCo0oufZbVpQwlwtuuEKEVpvxZx
q7oFYKCsAP9svCujGCXRHOmWhAAwe+wpXNb43l8coFn+pCfA8x3fCw==
=NOli
-----END PGP SIGNATURE-----
Merge tag 'landlock-7.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock fixes from Mickaël Salaün:
"This mainly fixes the Landlock tracepoint support merged this cycle so
that denial and rule events report the intended policy context,
whether through tracefs or BTF-visible callbacks.
The size of this all is mainly from propagating the corrected contract
through event definitions and producers, adding new tests for the
reported context, and updating the documentation.
Also improve annotation and fix a GCC 16 build warning"
* tag 'landlock-7.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Widen ruleset versions to 64 bits
landlock: Add counted_by in landlock_domain
landlock: Fix tracepoint contract documentation
selftests/landlock: Test network denial context
selftests/landlock: Test filesystem denial blockers
landlock: Report the effective signal number
landlock: Report the actual ptrace tracer
landlock: Fix network denial trace context
landlock: Fix rule tracepoint context
landlock: Fix filesystem denial blocker reporting
landlock: Fix tracepoint fixed-width type names
landlock: Work around gcc-16 -Wuninitialized warning
gve_can_send_tso() computes how many buffers each segment of a GSO
packet would span, and for this it needs the length of the headers
that the device replicates in front of every segment.
It unconditionally uses skb_tcp_all_headers(), which reads the doff
field of the TCP header. SKB_GSO_UDP_L4 packets have no TCP header:
tcp_hdrlen() then reads one byte of the UDP payload, and header_len
can be anything in [0, 60] instead of the transport offset plus the
eight bytes of the UDP header that gve_prep_tso() programs into the
TSO context descriptor.
A wrong header length shifts all the segment boundaries computed in
the loop, so the number of buffers per segment can be over or under
estimated. In the first case, GSO is needlessly disabled for this
packet by gve_features_check_dqo() and the stack has to segment it.
In the second case, the driver hands the device a packet whose
segments span more than GVE_TX_MAX_DATA_DESCS buffers.
Use the UDP header length for SKB_GSO_UDP_L4 packets, matching what
gve_prep_tso() does.
Fixes: 014c607f86 ("gve: add support for UDP GSO for DQO format")
Closes: https://lore.kernel.org/netdev/CANn89i+MS4L60sFQ49=-f-mibeveUfcrpVkD5X+Qy6SOnEpd6w@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ankit Garg <nktgrg@google.com>
Cc: Harshitha Ramamurthy <hramamurthy@google.com>
Cc: Joshua Washington <joshwash@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260923145942.731365-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a CPU goes offline, dev_cpu_dead() drains its softnet queues
(completion_queue, output_queue, poll_list, process_queue, and
input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched.
If oldcpu goes offline while holding pending skbs in its
skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI
threshold, or if the IPI races with CPU teardown), those skbs remain
stranded until oldcpu is brought back online. If any of these skbs
hold page_pool fragments, page_pool_destroy() will stall indefinitely
waiting for inflight pages to be returned when a netdev or driver is
torn down while oldcpu is offline.
Additionally, if smp_call_function_single_async() fails in
kick_defer_list_purge() because the target CPU went offline, reset
defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the
CPU comes back online.
Also, if oldcpu was the last online CPU on its NUMA node, drain that
node's slot across all CPUs so no skbs deferred from that node remain
stranded on idle remote CPUs (or if the node itself is subsequently
offlined).
Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and
whether the caller migrated CPUs after llist_add(), flushing the node
list if so, to close the preemption TOCTOU race against CPU/node
teardown.
Fixes: 68822bdf76 ("net: generalize skb freeing deferral to per-cpu lists")
Fixes: 5628f3fe3b ("net: add NUMA awareness to skb_attempt_defer_free()")
Closes: https://lore.kernel.org/netdev/20260916003430.3612956-1-kris.pan@intel.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kris Pan <kris.pan@intel.com>
Link: https://patch.msgid.link/20260923130318.607255-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gmac_clk_enable() enables the bulk clocks first and then the optional
PHY clock. If clk_prepare_enable() on the PHY clock fails, the function
returns without rolling back the bulk clocks, and bsp_priv->clk_enabled
stays false, so the later gmac_clk_enable(bsp_priv, false) becomes a
no-op and the bulk clock references are leaked.
Add the missing clk_bulk_disable_unprepare() on that failure path.
Fixes: ea449f7fa0 ("net: ethernet: stmmac: dwmac-rk: rework optional clock handling")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Link: https://patch.msgid.link/20260923123713.3137146-1-coiaprant@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
prb_calc_retire_blk_tmo() computes in 32-bit int arithmetic:
mbits = (blk_size_in_bytes * 8) / (1024 * 1024);
If I'm reading the validation right, tp_block_size is user
controlled and packet_set_ring() only rejects values that are <= 0
as int or not page aligned, so a 256MiB block goes right through
(and alloc_one_pg_vec_page() even has a vzalloc fallback for it).
0x10000000 * 8 wraps to INT_MIN, and on a NIC reporting 1 Gbps
(div == 1) the function ends up returning -2047.
The condition is actually (8 * size) mod 2^32 >= 2^31 && div == 1,
so the trigger set is [256,512), [768,1024), [1280,1536) and
[1792,2048) MiB. Other sizes wrap to non-negative values and faster
links divide the unsigned value back below 2^31, which is why this
doesn't blow up for everyone.
What makes it fatal is what happens next in init_prb_bdqc():
p1->interval_ktime = ms_to_ktime(prb_calc_retire_blk_tmo(...));
hrtimer_start(&p1->retire_blk_timer, p1->interval_ktime,
HRTIMER_MODE_REL_SOFT);
A negative relative timeout expires immediately. The callback
unconditionally returns HRTIMER_RESTART, and hrtimer_forward() turns
the negative interval into hrtimer_resolution:
if (interval < hrtimer_resolution)
interval = hrtimer_resolution;
So the SOFT timer re-fires at the maximum rate forever, holding
sk_receive_queue.lock each pass. One CPU spins in softirq until the
socket is closed. Repeat with more rings and the machine is gone.
The overflow itself is ancient - it was introduced together with
TPACKET_V3 in f6fb8f100b ("af-packet: TPACKET_V3 flexible buffer
implementation."). Its effect prior to f7460d2989 ("net:
af_packet: Use hrtimer to do the retire operation", v6.18) was not
as clear-cut, though: the return value was stored into an unsigned
short retire_blk_tov, so a negative result was truncated, and a
0-jiffy delay loop could be programmed as well. Neither is nearly
as detrimental as the immediate maximum-rate spin the hrtimer
conversion turned it into.
(Unrelated to CVE-2019-20812 - that one was the ethtool failure path
returning 0, which now returns DEFAULT_PRB_RETIRE_TOV.)
Reproducer, needs CAP_NET_RAW (a --network host container has it by
default) and a 1 Gbps NIC (QEMU e1000 works):
int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
bind(fd, ...);
int v = TPACKET_V3;
setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v));
struct tpacket_req3 req = {
.tp_block_size = 0x10000000,
.tp_block_nr = 1,
.tp_frame_size = 2048,
.tp_frame_nr = 0x10000000 / 2048,
.tp_retire_blk_tov = 0,
};
setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &req, sizeof(req));
Compute in 64 bits instead. The operands are already bounded by the
existing validation, so nothing else changes. If you'd prefer a
different fix, just say so and I'll respin.
Fixes: f6fb8f100b ("af-packet: TPACKET_V3 flexible buffer implementation.")
Cc: stable@vger.kernel.org
Signed-off-by: Dairui Zhang <zhangdairui@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260923050101.1510064-1-zhangdairui@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mon_timeout() evaluates dom_size(mon->peer_cnt) before it takes mon->lock,
while mon->peer_cnt is updated under that lock by tipc_mon_add_peer() and
tipc_mon_remove_peer(). The value can therefore be stale, and the decision
whether the local domain has to be recomputed can be based on an outdated
member count.
Read mon->peer_cnt inside the write_lock_bh(&mon->lock) protected region.
Fixes: 35c55c9877 ("tipc: add neighbor monitoring framework")
Signed-off-by: Ginger Li <ginger.jzllee@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260922080909.21123-1-ginger.jzllee@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MaxLinear GSW12x/GSW14x Ethernet Switch Errata Sheet states:
"An issue has been sporadically observed after device power-on on the first
link-up attempt in 100BASE-TX mode resulting in either the link-up taking a
long time, or failing to link-up altogether...
Workaround:
After power-on, enable Cable Diagnostic Mode for all ports and disable
it..."
Implement the proposed workaround unconditionally in the Intel XWAY driver
(MaxLinear GSW1xx switches incorporate Intel XWAY PHYs) because the
diagnostic bits have the same meaning even in older integral PHYs such as
GPY111/PEF7071/PHY11G. So it's not clear how to distinguish the affected
newer integrated PHYs, but the workaround should not hurt the older PHYs.
Cc: stable@vger.kernel.org
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260922075251.23386-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smcr_port_err() traverses smc_lgr_list.list without holding
smc_lgr_list.lock, allowing a concurrent smc_lgr_terminate_sched()
to free an lgr while it is still being dereferenced.
Hold smc_lgr_list.lock across the traversal. Update
smc_ib_gid_check() to call smcr_port_err() after releasing the lock.
Fixes: 541afa10c1 ("net/smc: add smcr_port_err() and smcr_link_down() processing")
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Signed-off-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260922073149.474762-1-sidraya@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__rds_conn_create() computes npaths from the caller's transport before
it decides whether a connection to one of the host's own addresses is
to be handled by the loopback transport instead. That substitution is
what an RDS/TCP socket sending to a local address gets, and after it
the path init loop still runs for the TCP transport's RDS_MPATH_WORKERS
paths and allocates an ordered workqueue for each, while
rds_loop_conn_alloc() only ever provides transport data for path 0.
rds_conn_destroy() sizes its teardown from c_trans, by then the
loopback transport, so it visits path 0 only - and
rds_conn_path_destroy() would skip the other paths anyway, since it
returns before destroy_workqueue() for a path without transport data.
kfree(c_path) then drops the last pointers to seven workqueues. That
repeats for every such connection, on every netns teardown or module
unload, and every distinct local destination address is a separate
connection.
Recompute npaths once the transport is final, so that creation and
destruction agree on the set of paths. The c_path array stays sized
for the caller's transport; the unused entries are freed with it.
Fixes: 4716af3897 ("net/rds: Give each connection path its own workqueue")
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260921215027.174657-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nfp_net_ipsec_rx() drops the XArray lock before taking a reference to the
xfrm_state it found. The delete path can erase the entry and drop the last
state reference in that interval. RX can then try to increment a zero
refcount after the state has been queued for destruction.
The driver queues firmware invalidation asynchronously; the delete path
does not wait for the command to complete or drain pending RX processing.
The XFRM garbage collector waits for an RCU grace period before freeing
the state. That delays reclamation but does not make acquiring a reference
from zero valid.
Take the xfrm_state reference before releasing the XArray lock so
xa_erase() cannot run between lookup and reference acquisition.
Fixes: 57f273adbc ("nfp: add framework to support ipsec offloading")
Reported-by: Changyul Lee <lcy8047@gmail.com>
Signed-off-by: Sang-Hoon Choi <csh0052@gmail.com>
Link: https://patch.msgid.link/179001455912.44752.17153022439349797877.idr-bug-92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangshuo Li says:
====================
net: ena: fix resource cleanup on probe failure
This series fixes two resource leaks in the ena_probe() error path after
ena_device_init() has successfully initialized device resources.
Patch 1 adds the missing PHC cleanup.
Patch 2 adds the missing MMIO read request cleanup.
====================
Link: https://patch.msgid.link/20260921154202.471662-1-lgs201920130244@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ena_device_init() initializes the MMIO read mechanism with
ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA
buffer for MMIO read responses.
The normal removal path releases this buffer through
ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails
after ena_device_init() succeeds, the error path destroys the admin
resources and eventually frees ena_dev without destroying the MMIO read
request, leaving the coherent DMA buffer allocated.
Call ena_com_mmio_reg_read_request_destroy() in the probe error path
before releasing the remaining device resources.
This issue was found by manual code inspection.
Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260921154202.471662-3-lgs201920130244@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ena_probe() initializes the PHC as part of ena_device_init(), but the
probe failure path does not destroy it before freeing the PHC private
data.
The normal removal path calls ena_phc_destroy() through
ena_destroy_device() before ena_phc_free(). However, if probe fails
after ena_device_init() succeeds, the error path reaches ena_phc_free()
without unregistering the PTP clock or destroying the device PHC
resources.
Call ena_phc_destroy() in the probe error path before freeing the PHC
private data.
This issue was found by manual code inspection.
Cc: stable@vger.kernel.org tags and describe this as a consistency cleanup
Fixes: e0ea34158e ("net: ena: Add PHC support in the ENA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Cc: stable
Link: https://patch.msgid.link/20260921154202.471662-2-lgs201920130244@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ilya Maximets says:
====================
ovs, net/sched: fixes for UAF after conntrack extension realloc
One clean up change plus two fixes for the UAF on helper extension
realloc x 2. First half for OVS and the second half for the similar
code in act_ct. This should cover all the known cases of this problem
in these two modules.
====================
Link: https://patch.msgid.link/20260921145655.3167436-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the expectation.
Make sure that helpers are called at the end after all the other
extensions are already added.
Note that the helper rejection now leaves the mark and labels set,
but that's not different from how the NAT was handled before or how
the mark and the labels were handled on confirmation failure. And
there are no atomicity guarantees provided by the API anyway.
Fixes: a21b06e731 ("net: sched: add helper support in act_ct")
Cc: stable@vger.kernel.org
Reported-by: Axel Mierczuk <axel.mierczuk@1password.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260921145655.3167436-7-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This variable can only become 'true' when the connection is not
confirmed, but it is only checked when it is confirmed. So, it can be
treated as being always false and just removed.
Fixes: a21b06e731 ("net: sched: add helper support in act_ct")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260921145655.3167436-6-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a case where skb with an unconfirmed ct entry gets cloned, we may
end up processing both again but with different sets of extensions.
The series of events:
1. The first clone wants to commit and runs the helpers wiring up
the extension pointer into the expectation list.
2. Then it looses the confirmation keeping the entry unconfirmed.
3. Second clone now wants to commit labels or run NAT and adds the
new extension for that breaking the pointer in the expectation
list causing UAF on the destruction path later.
While this is possible to trigger, there should be no practical
network pipeline where we need to process both clones without
modifications in the same zone. So, let's just reset the entry in
case for some reason we got an skb with a shared one. This doesn't
affect any known use cases, but avoids any potential problems with
sharing and modification of the unconfirmed ct entry.
Unlike openvswitch module, act_ct allows for NAT without commit.
Changing that would be a uAPI break. So, act_ct needs to reset on NAT
regardless of the commit flag to avoid reallocation of the extension
space. This, however, doesn't really change the picture for sensible
networking cases as there should be no need to run the same packet
twice (before and after the clone) through conntrack without packet
header or zone changes and without commit.
The fixes tag points to the introduction of helpers, since that's the
main UAF trigger for the sharing.
Fixes: a21b06e731 ("net: sched: add helper support in act_ct")
Cc: stable@vger.kernel.org
Reported-by: Axel Mierczuk <axel.mierczuk@1password.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260921145655.3167436-5-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the expectation.
Make sure that helpers are called at the end after all the other
extensions are already added.
Note that the helper rejection now leaves the mark and labels set,
but that's not different from how the NAT was handled before or how
the mark and the labels were handled on confirmation failure. And
there are no atomicity guarantees provided by the API anyway.
Fixes: cae3a26275 ("openvswitch: Allow attaching helpers to ct action")
Cc: stable@vger.kernel.org
Reported-by: Axel Mierczuk <axel.mierczuk@1password.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260921145655.3167436-4-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This variable can only become 'true' when the connection is not
confirmed, but it is only checked when it is confirmed. So, it can be
treated as being always false and just removed.
Fixes: 3c1860543f ("openvswitch: add nf_ct_is_confirmed check before assigning the helper")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260921145655.3167436-3-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a case where skb with an unconfirmed ct entry gets cloned, we may
end up committing both but with different sets of extensions.
The series of events:
1. The first clone wants to commit and runs the helpers wiring up
the extension pointer into the expectation list.
2. Then it looses the confirmation keeping the entry unconfirmed.
3. Second clone now wants to commit labels and adds the new extension
for that breaking the pointer in the expectation list causing
UAF on the destruction path later.
While this is possible to trigger, there should be no practical
network pipeline where committing both clones without modifications
into the same zone is needed. So, let's just reset the entry in case
for some reason we got an skb with a shared one during commit. This
doesn't affect any known use cases, but avoids any potential problems
with sharing and modification of the unconfirmed ct entry.
The fixes tag points to the introduction of helpers, since that's the
main UAF trigger for the sharing.
Fixes: cae3a26275 ("openvswitch: Allow attaching helpers to ct action")
Cc: stable@vger.kernel.org
Reported-by: Axel Mierczuk <axel.mierczuk@1password.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260921145655.3167436-2-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* add selftest coverage for peer VPN address validation
* reject multicast, broadcast and loopback peer VPN addresses, which
can never identify a peer
* reject MP peers left with no usable VPN address, as they can never
be selected for TX
* reject duplicate peer VPN addresses, which made peer lookup return
an arbitrary peer
* fix stale entry left in the VPN address hashtable when an address
is cleared
* fix torn IPv6 address read on lockless TX when the unusable local
source is cleared in place
* fix torn IPv6 address read on lockless TX when a new local endpoint
is learned in place
* fix dst cache being populated with a route resolved from an already
replaced bind
* fix stale route being reused after the socket mark or UDP source
port changed
* fix bogus validation of an unspecified local source address, which
must instead be left to route source autoselection
* fix IPv6 link-local peer endpoints losing their scope id when
configured via netlink, breaking route lookup
-----BEGIN PGP SIGNATURE-----
iJEEABYIADkWIQQr0db7q+Rc7Zog28Fc8QQzwdnOtwUCarECxxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQXPEEM8HZzrcvTAEA/r3oFnZ4EOtiOyA2OpZ/
Iya+WAJ7LShj7tLymzujMe8BAIH6J2RyrWXnfDFvtSG8HGDEe4EBzVpP56tX0ZVn
xc0N
=fg0G
-----END PGP SIGNATURE-----
Merge tag 'ovpn-net-20260921' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
Included fixes:
* add selftest coverage for peer VPN address validation
* reject multicast, broadcast and loopback peer VPN addresses, which
can never identify a peer
* reject MP peers left with no usable VPN address, as they can never
be selected for TX
* reject duplicate peer VPN addresses, which made peer lookup return
an arbitrary peer
* fix stale entry left in the VPN address hashtable when an address
is cleared
* fix torn IPv6 address read on lockless TX when the unusable local
source is cleared in place
* fix torn IPv6 address read on lockless TX when a new local endpoint
is learned in place
* fix dst cache being populated with a route resolved from an already
replaced bind
* fix stale route being reused after the socket mark or UDP source
port changed
* fix bogus validation of an unspecified local source address, which
must instead be left to route source autoselection
* fix IPv6 link-local peer endpoints losing their scope id when
configured via netlink, breaking route lookup
* tag 'ovpn-net-20260921' of https://github.com/OpenVPN/ovpn-net-next:
selftests: ovpn: validate peer VPN addresses
ovpn: reject invalid peer VPN addresses
ovpn: reject multipeer peers without VPN addresses
ovpn: reject duplicate peer VPN addresses
ovpn: always unhash old VPN addresses before rehashing
ovpn: replace bind when clearing stale local source
ovpn: replace bind when learning local endpoint
ovpn: validate peer state before caching UDP dst
ovpn: track UDP socket route key for peer dst cache
ovpn: skip UDP source validation for unspecified addresses
ovpn: preserve IPv6 scope id for netlink peer endpoints
====================
Link: https://patch.msgid.link/20260921102215.3599702-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary
worker and the timestamp cleanup paths. The
WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from
submitting timestamp requests, but does not serialize the worker
against cleanup.
As a result, wx_ptp_clear_tx_timestamp() can free an skb after
wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may
then pass the freed skb to skb_tstamp_tx() and release the same
reference again.
The cleanup path may also clear the in-progress bit while the worker
is still processing the old skb. This allows the Tx path to publish a
new skb which the worker can subsequently overwrite with NULL,
leaking its reference.
Add a dedicated spinlock to protect publication and consumption of
the Tx timestamp skb. Detach the skb and clear the in-progress bit
while holding the lock, then deliver the timestamp and release the skb
after dropping it. Use the same locked cleanup in the quiesce path,
but keep the detach there free of register accesses: quiesce runs
during PCIe error recovery, where MMIO is not reliable, and it
deliberately did not touch the device before. The lock is taken with
interrupts disabled, because netpoll can call ndo_start_xmit() with
hard interrupts already off.
When handling a Tx DMA mapping failure, keep the transmit path
reference until after comparing the skb under the lock. This prevents
skb address reuse from making the error path mistake a newer timestamp
request for the failed one.
Fixes: 06e75161b9 ("net: wangxun: Add support for PTP clock")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://netdev-ai.bots.linux.dev/sashiko/#/patchset/6C7EC12D69217315%2B20260818074721.45536-1-jiawenwu%40trustnetic.com
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/77431AF9A0E369F3+20260921071549.1141804-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phylink_bringup_phy() stores the PHY in pl->phydev before its last
fallible step: on a MAC whose phylink ops implement LPI,
phy_eee_rx_clock_stop() can fail with a real MDIO error. The callers
unwind with phy_detach(), which knows nothing about pl->phydev, so a
pointer to a PHY that is no longer attached outlives the failed
connect.
What that costs depends on how the caller got here.
phylink_connect_phy() goes through phylink_attach_phy(), which refuses
to attach while pl->phydev is set, turning a transient MDIO error into
a permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy()
answers the failure with phy_device_remove() and phy_device_free(), and
it assigns sfp->mod_phy only past that error return, so nothing clears
pl->phydev and it is left pointing at a freed phy_device that
phylink_resolve() and the ethtool helpers go on reading.
phylink_fwnode_phy_connect() has no such check, so a later connect
overwrites the stale pointer and hides the problem. A disconnect does
not: phylink_disconnect_phy() hands that pointer to phy_disconnect(),
and the second phy_detach() on the same PHY drops references the first
one already released.
Found while making a DSA port survive a PHY whose driver arrives after
the switch probes: keeping the port across a failed connect and
retrying is what makes this window reachable.
Publish the pointer after the last call that can fail instead of
unwinding it afterwards. Nothing between the two points reads
pl->phydev, and the registration that follows cannot fail:
phy_request_interrupt() falls back to polling on its own. The PHY-side
state keeps the order it had, so no MDIO operation moves relative to
another.
Fixes: 03abf2a7c6 ("net: phylink: add EEE management")
Signed-off-by: Aleksei Sviridkin <f@lex.la>
Link: https://patch.msgid.link/20260920222044.1752860-1-f@lex.la
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MeiG Smart SRM821 5G module (0x2dee:0x4d53) crashes and drops off
the USB bus when it receives a Zero Length Packet (ZLP) after sending
or receiving an NTB of exactly 16384 bytes (tx_max).
According to the MBIM specification, devices do not require a ZLP
if the NTB size is exactly dwNtbOutMaxSize. However, the cdc_mbim
driver defaults to sending ZLPs for devices not explicitly whitelisted
to accommodate non-conformant hardware. This default behavior breaks
the strictly conformant MeiG SRM821 module.
Add this device to the ZLP conformance whitelist (cdc_mbim_info) so
the driver will pad the NTB to avoid sending ZLPs, preventing the
device firmware from crashing.
Cc: stable@vger.kernel.org
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Link: https://patch.msgid.link/20260920074500.826121-1-wangming01@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alessandro Zini says:
====================
net: ethernet: oa_tc6: add reset-gpios support
This series adds optional reset GPIO support for OPEN Alliance 10BASE-T1x
MAC-PHY devices using the OA TC6 library, and documents the property for
the Microchip LAN8650/1 MAC-PHY.
Patch 1 documents the optional reset-gpios property for the Microchip
LAN8650/1.
Patch 2 converts oa_tc6_init() to return an ERR_PTR instead of NULL, so
that -EPROBE_DEFER from the GPIO lookup added in patch 3 reaches the
driver core instead of being turned into -ENODEV.
Patch 3 implements optional reset GPIO handling in the common oa_tc6
library. The reset line is requested asserted, kept asserted for 10 us and
1 ms of settle time is allowed after deassertion for the crystal
oscillator startup, before the OPEN Alliance TC6 communication is started.
====================
Link: https://patch.msgid.link/20260918231450.55966-1-alessandro.zini@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
OPEN Alliance 10BASE-T1x MAC-PHY Serial Interface specification
(v1.1, section 8.2) defines an external RESET pin as an optional reset
source for the MAC-PHY.
Add support for an optional reset GPIO in oa_tc6_init(). The GPIO is
requested asserted, kept asserted for 10 us and, once deasserted, 1 ms of
settle time is allowed for the crystal oscillator startup before the
initial TC6 control protection check and software reset are performed.
As the reset handling lives in the common library, it is available to all
MAC-PHY devices using oa_tc6_init() that provide an external reset pin.
Suggested-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Signed-off-by: Alessandro Zini <alessandro.zini@siemens.com>
Link: https://patch.msgid.link/20260918231450.55966-4-alessandro.zini@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
oa_tc6_init() returns NULL on failure, so the reason for the failure is
lost and both callers turn it into a plain -ENODEV. In preparation for
acquiring an optional reset GPIO, which can return -EPROBE_DEFER when the
GPIO provider is not available yet, the error code has to reach the driver
core, otherwise the SPI device would never be probed again.
Convert oa_tc6_init() to return an ERR_PTR on failure instead of NULL,
and update the lan865x and adin1140 callers to check with IS_ERR() and
propagate the error with PTR_ERR().
Signed-off-by: Alessandro Zini <alessandro.zini@siemens.com>
Link: https://patch.msgid.link/20260918231450.55966-3-alessandro.zini@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add optional reset-gpios property to describe the connection to the
hardware RESET_N pin of the LAN8650/1 MAC-PHY.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alessandro Zini <alessandro.zini@siemens.com>
Link: https://patch.msgid.link/20260918231450.55966-2-alessandro.zini@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When tcp_send_synack() replaces the cloned SYN skb at the head of the
retransmit queue with a copy, it frees the original with
tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack.
tp->retransmit_skb_hint keeps pointing at the freed
skbuff_fclone_cache object.
The dangling hint is read in tcp_verify_retransmit_hint() and used as
the root of the rbtree walk in tcp_xmit_retransmit_queue(). An
unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with
an attacker-supplied ICMP fragmentation-needed message, after which a
simultaneous open frees the armed SYN skb:
BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
Read of size 4 at addr ffff88800604d928 by task swapper/1/0
Call Trace:
tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
tcp_simple_retransmit (net/ipv4/tcp_input.c:3158)
tcp_v4_err (net/ipv4/tcp_ipv4.c:587)
Sync the hint to the copy.
Fixes: c31b70c996 ("tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit")
Reported-by: Kimi Security Team <bug-report@moonshot.ai>
Tested-by: Weiming Shi <shiweiming@moonshot.ai>
Signed-off-by: Yilin Zhang <yilinzhang@moonshot.ai>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/8a9dff4063a2745653b7e88ceb745d75efa16e68.1790224474.git.yilinzhang@moonshot.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a socket transmits a packet with MCTP_TAG_PREALLOC set,
mctp_lookup_prealloc_tag() iterates over the per-netns &mns->keys list
and matches netid, req_tag, peer_addr, and manual_alloc, without
checking whether tmp->sk == &msk->sk. This allows any MCTP socket in the
same network namespace to use and consume another socket's preallocated
tag.
Iterate the socket's own tag list (&msk->keys via sklist) instead of the
namespace-wide &mns->keys list in mctp_lookup_prealloc_tag(), ensuring
that only tags allocated by msk are matched.
Tested in QEMU against Linux 7.3.0-rc3 by allocating a manual tag
(0x18) on socket A via SIOCMCTPALLOCTAG for peer EID 9 and sending a
4-byte message with MCTP_TAG_PREALLOC from socket B in the same network
namespace. On the unfixed kernel, sendto(sock_b) using socket A's
preallocated tag succeeds (ret = 4); with this patch applied,
sendto(sock_b) fails with -ENOENT (errno = 2) while sendto(sock_a)
succeeds (ret = 4).
Fixes: 63ed1aab3d ("mctp: Add SIOCMCTP{ALLOC,DROP}TAG ioctls for tag control")
Suggested-by: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Peng <benquike@gmail.com>
Link: https://patch.msgid.link/20260921051002.1656692-1-benquike@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test that validates ping traffic over VLAN interfaces. It aims
to catch drivers which mishandle hardware VLAN tag stripping, in
particular QinQ.
Three VLAN configurations are covered, each with hardware RX VLAN
stripping enabled and disabled (via the rx-vlan-offload and
rx-vlan-stag-hw-parse features):
- a single 802.1q VLAN interface
- a single 802.1ad VLAN interface
- an 802.1q VLAN stacked on top of an 802.1ad interface
The "hw" test variants enable the RX VLAN stripping features supported
by the device (rx-vlan-offload and rx-vlan-stag-hw-parse), the "sw"
test variants disable all of them. A test is xfailed if the requested
configuration is not possible.
VLAN insertion offloads are not tested for now.
NETIF=end0 LOCAL_V4=172.16.0.2 REMOTE_V4=172.16.0.3 \
REMOTE_TYPE=ssh REMOTE_ARGS=root@172.16.0.3 \
run_kselftest.sh -t drivers/net/hw:vlan.py
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: vlan.py
# # Interface: end0, driver: st_gmac
# TAP version 13
# 1..6
# ok 1 vlan.test.8021q_hw
# ok 2 vlan.test.8021q_sw
# ok 3 vlan.test.8021ad_hw
# ok 4 vlan.test.8021ad_sw
# ok 5 vlan.test.qinq_hw
# ok 6 vlan.test.qinq_sw
# # Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net/hw: vlan.py
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260918112529.96039-4-ovidiu.panait.rb@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Read back the features after running ethtool -K to check if they were
actually applied. The drivers might refuse to set a feature silently and
the test could run with a different configuration than the requested one.
Add a 'check' parameter to skip this, as the GRO "hw" mode handles the
case where HW GRO is cleared by the driver.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260918112529.96039-3-ovidiu.panait.rb@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
