Add the apple,t8112-pmgr-pwrstate compatible for the Apple M2 SoC.
This goes after t8103. The sort order logic here is having SoC numeric
code families in release order, and SoCs within each family in release
order:
- t8xxx (Apple HxxP/G series, "phone"/"tablet" chips)
- t8103 (Apple H13G/M1)
- t8112 (Apple H14G/M2)
- t6xxx (Apple HxxJ series, "desktop" chips)
- t6000 (Apple H13J(S)/M1 Pro)
- t6001 (Apple H13J(C)/M1 Max)
- t6002 (Apple H13J(D)/M1 Ultra)
Note that t600[0-2] share the t6000 compatible where the hardware is
100% compatible, which is usually the case in this highly related set
of SoCs.
Reviewed-by: Janne Grunau <j@jannau.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
Userspace PROT_NONE ptes set _PAGE_PRIVILEGED, triggering a false
positive debug assertion that __pte_flags_need_flush() is not called
on a kernel mapping.
Detect when it is a userspace PROT_NONE page by checking the required
bits of PAGE_NONE are set, and none of the RWX bits are set.
pte_protnone() is insufficient here because it always returns 0 when
CONFIG_NUMA_BALANCING=n.
Fixes: b11931e9ad ("powerpc/64s: add pte_needs_flush and huge_pmd_needs_flush")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230302225947.81083-1-bgray@linux.ibm.com
Arseniy Krasnov says:
====================
allocate multiple skbuffs on tx
This adds small optimization for tx path: instead of allocating single
skbuff on every call to transport, allocate multiple skbuff's until
credit space allows, thus trying to send as much as possible data without
return to af_vsock.c.
Also this patchset includes second patch which adds check and return from
'virtio_transport_get_credit()' and 'virtio_transport_put_credit()' when
these functions are called with 0 argument. This is needed, because zero
argument makes both functions to behave as no-effect, but both of them
always tries to acquire spinlock. Moreover, first patch always calls
function 'virtio_transport_put_credit()' with zero argument in case of
successful packet transmission.
====================
Link: https://lore.kernel.org/r/b0d15942-65ba-3a32-ba8d-fed64332d8f6@sberdevices.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both of these functions have no effect when input argument is 0, so to
avoid useless spinlock access, check argument before it.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds small optimization for tx path: instead of allocating single
skbuff on every call to transport, allocate multiple skbuff's until
credit space allows, thus trying to send as much as possible data without
return to af_vsock.c.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dario Binacchi <dario.binacchi@amarulasolutions.com> says:
The series adds support for the basic extended CAN controller (bxCAN)
found in many low- to middle-end STM32 SoCs.
The driver has been tested on the stm32f469i-discovery board with a
kernel version 5.19.0-rc2 in loopback + silent mode:
ip link set can0 type can bitrate 125000 loopback on listen-only on
ip link set up can0
candump can0 -L &
cansend can0 300#AC.AB.AD.AE.75.49.AD.D1
For uboot and kernel compilation, as well as for rootfs creation I used
buildroot:
make stm32f469_disco_sd_defconfig
make
but I had to patch can-utils and busybox as can-utils and iproute are
not compiled for MMU-less microcotrollers. In the case of can-utils,
replacing the calls to fork() with vfork(), I was able to compile the
package with working candump and cansend applications, while in the
case of iproute, I ran into more than one problem and finally I decided
to extend busybox's ip link command for CAN-type devices. I'm still
wondering if it was really necessary, but this way I was able to test
the driver.
Changes in v10: https://lore.kernel.org/all/20230328073328.3949796-1-dario.binacchi@amarulasolutions.com
- Fix errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'.
Fix the "st,can-primary" description removing the "Note:" word that
caused the failure.
- Slightly change the note text at the top of the driver module. No
functional changes.
Changes in v9: https://lore.kernel.org/all/20230327201630.3874028-1-dario.binacchi@amarulasolutions.com
- Fix commit description formatting. No semantic changes have been made.
- Replace master/slave terms with primary/secondary.
- Replace master/slave terms with primary/secondary.
- Replace master/slave terms with primary/secondary.
Changes in v8: https://lore.kernel.org/all/20230326160325.3771891-1-dario.binacchi@amarulasolutions.com
- Do not enable the clock in probe and enable/disable it in open/close.
- Return IRQ_NONE if no IRQ is active.
Changes in v7: https://lore.kernel.org/all/20230116175152.2839455-1-dario.binacchi@amarulasolutions.com
- Add Vincent Mailhol's Reviewed-by tag.
- Remove all unused macros for reading/writing the controller registers.
- Add CAN_ERR_CNT flag to notify availability of error counter.
- Move the "break" before the newline in the switch/case statements.
- Print the mnemotechnic instead of the error value in each netdev_err().
- Remove the debug print for timings parameter.
- Do not copy the data if CAN_RTR_FLAG is set in bxcan_start_xmit().
- Populate ndev->ethtool_ops with the default timestamp info.
Changes in v6: https://lore.kernel.org/all/20230109182356.141849-1-dario.binacchi@amarulasolutions.com
- move can1 node before gcan to keep ordering by address.
Changes in v5: https://lore.kernel.org/all/20221017164231.4192699-1-dario.binacchi@amarulasolutions.com
- Add Rob Herring's Acked-by tag.
- Add Rob Herring's Reviewed-by tag.
- Put static in front of bxcan_enable_filters() definition.
Changes in v4: https://lore.kernel.org/all/20220925175209.1528960-1-dario.binacchi@amarulasolutions.com
- Remove "st,stm32f4-bxcan-core" compatible. In this way the can nodes
(compatible "st,stm32f4-bxcan") are no longer children of a parent
node with compatible "st,stm32f4-bxcan-core".
- Add the "st,gcan" property (global can memory) to can nodes which
references a "syscon" node containing the shared clock and memory
addresses.
- Replace the node can@40006400 (compatible "st,stm32f4-bxcan-core")
with the gcan@40006600 node ("sysnode" compatible). The gcan node
contains clocks and memory addresses shared by the two can nodes
of which it's no longer the parent.
- Add to can nodes the "st,gcan" property (global can memory) which
references the gcan@40006600 node ("sysnode compatibble).
- Add "dt-bindings: arm: stm32: add compatible for syscon gcan node" patch.
- Drop the core driver. Thus bxcan-drv.c has been renamed to bxcan.c and
moved to the drivers/net/can folder. The drivers/net/can/bxcan directory
has therefore been removed.
- Use the regmap_*() functions to access the shared memory registers.
- Use spinlock to protect bxcan_rmw().
- Use 1 space, instead of tabs, in the macros definition.
- Drop clock ref-counting.
- Drop unused code.
- Drop the _SHIFT macros and use FIELD_GET()/FIELD_PREP() directly.
- Add BXCAN_ prefix to lec error codes.
- Add the macro BXCAN_RX_MB_NUM.
- Enable time triggered mode and use can_rx_offload().
- Use readx_poll_timeout() in function with timeouts.
- Loop from tail to head in bxcan_tx_isr().
- Check bits of tsr register instead of pkts variable in bxcan_tx_isr().
- Don't return from bxcan_handle_state_change() if skb/cf are NULL.
- Enable/disable the generation of the bus error interrupt depending
on can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING.
- Don't return from bxcan_handle_bus_err() if skb is NULL.
- Drop statistics updating from bxcan_handle_bus_err().
- Add an empty line in front of 'return IRQ_HANDLED;'
- Rename bxcan_start() to bxcan_chip_start().
- Rename bxcan_stop() to bxcan_chip_stop().
- Disable all IRQs in bxcan_chip_stop().
- Rename bxcan_close() to bxcan_ndo_stop().
- Use writel instead of bxcan_rmw() to update the dlc register.
Changes in v3: https://lore.kernel.org/all/20220828133329.793324-1-dario.binacchi@amarulasolutions.com
- Remove 'Dario Binacchi <dariobin@libero.it>' SOB.
- Add description to the parent of the two child nodes.
- Move "patterProperties:" after "properties: in top level before "required".
- Add "clocks" to the "required:" list of the child nodes.
- Remove 'Dario Binacchi <dariobin@libero.it>' SOB.
- Add "clocks" to can@0 node.
- Remove 'Dario Binacchi <dariobin@libero.it>' SOB.
- Remove a blank line.
- Remove 'Dario Binacchi <dariobin@libero.it>' SOB.
- Fix the documentation file path in the MAINTAINERS entry.
- Do not increment the "stats->rx_bytes" if the frame is remote.
- Remove pr_debug() call from bxcan_rmw().
Changes in v2: https://lore.kernel.org/all/20220820082936.686924-1-dario.binacchi@amarulasolutions.com
- Change the file name into 'st,stm32-bxcan-core.yaml'.
- Rename compatibles:
- st,stm32-bxcan-core -> st,stm32f4-bxcan-core
- st,stm32-bxcan -> st,stm32f4-bxcan
- Rename master property to st,can-master.
- Remove the status property from the example.
- Put the node child properties as required.
- Remove a blank line.
- Fix sparse errors.
- Create a MAINTAINERS entry.
- Remove the print of the registers address.
- Remove the volatile keyword from bxcan_rmw().
- Use tx ring algorithm to manage tx mailboxes.
- Use can_{get|put}_echo_skb().
- Update DT properties.
v1: https://lore.kernel.org/all/20220817143529.257908-1-dario.binacchi@amarulasolutions.com
Link: https://lore.kernel.org/all/20230328073328.3949796-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add support for the basic extended CAN controller (bxCAN) found in many
low- to middle-end STM32 SoCs. It supports the Basic Extended CAN
protocol versions 2.0A and B with a maximum bit rate of 1 Mbit/s.
The controller supports two channels (CAN1 as primary and CAN2 as
secondary) and the driver can enable either or both of the channels. They
share some of the required logic (e. g. clocks and filters), and that means
you cannot use the secondary CAN without enabling some hardware resources
managed by the primary CAN.
Each channel has 3 transmit mailboxes, 2 receive FIFOs with 3 stages and
28 scalable filter banks.
It also manages 4 dedicated interrupt vectors:
- transmit interrupt
- FIFO 0 receive interrupt
- FIFO 1 receive interrupt
- status change error interrupt
Driver uses all 3 available mailboxes for transmission and FIFO 0 for
reception. Rx filter rules are configured to the minimum. They accept
all messages and assign filter 0 to CAN1 and filter 14 to CAN2 in
identifier mask mode with 32 bits width. It enables and uses transmit,
receive buffers for FIFO 0 and error and status change interrupts.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230328073328.3949796-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add pin configurations for using CAN controller on stm32f469-disco
board. They are located on the Arduino compatible connector CN5 (CAN1)
and on the extension connector CN12 (CAN2).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230328073328.3949796-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add support for bxcan (Basic eXtended CAN controller) to STM32F429. The
chip contains two CAN peripherals, CAN1 the primary and CAN2 the secondary,
that share some of the required logic like clock and filters. This means
that the secondary CAN can't be used without the primary CAN.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230328073328.3949796-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add documentation of device tree bindings for the STM32 basic extended
CAN (bxcan) controller.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20230328073328.3949796-3-dario.binacchi@amarulasolutions.com
[mkl: drop unneeded quotes]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since commit ad440432d1 ("dt-bindings: mfd: Ensure 'syscon' has a
more specific compatible") it is required to provide at least 2 compatibles
string for syscon node.
This patch documents the new compatible for stm32f4 SoC to support
global/shared CAN registers access for bxCAN controllers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20230328073328.3949796-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Bank A and B IOs can't be handled by the pin controller 'Z'. This patch
assign spi1 pin definition to the correct controller.
Fixes: 9ad65d245b ("ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group")
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Sven Auhagen says:
====================
net: mvpp2: rss fixes
This patch series fixes up some rss problems
in the mvpp2 driver.
The classifier is missing some fragmentation flags,
the parser has the QinQ headers switched and
the PPPoE Layer 4 detecion is not working
correctly.
This is leading to no or bad rss for the default
settings.
====================
Link: https://lore.kernel.org/r/20230325163903.ofefgus43x66as7i@Svens-MacBookPro.local
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In PPPoE add all IPv4 header option length to the parser
and adjust the L3 and L4 offset accordingly.
Currently the L4 match does not work with PPPoE and
all packets are matched as L3 IP4 OPT.
Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The mvpp2 parser entry for QinQ has the inner and outer VLAN
in the wrong order.
Fix the problem by swapping them.
Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Although we now sanitycheck MMIO access during driver load to make sure
the MMIO BAR isn't returning all 0xFFFFFFFF, there have been a few cases
where (temporarily?) unreliable MMIO access has happened after GPU
resets or power events. We'll often notice this on our next GT register
access since forcewake handling will fail; let's change our handling
slightly so that when this happens we print a more meaningful message
clarifying that the problem is the MMIO access, not forcewake
specifically.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327195547.356584-3-andi.shyti@linux.intel.com
We occasionally see the PCI device in a non-accessible state at the
point the driver is loaded. When this happens, all BAR accesses will
read back as 0xFFFFFFFF. Rather than reading registers and
misinterpreting their (invalid) values, let's specifically check for
0xFFFFFFFF in a register that cannot have that value to see if the
device is accessible.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327195547.356584-2-andi.shyti@linux.intel.com
atomic_t based reference counting, including refcount_t, uses
atomic_inc_not_zero() for acquiring a reference. atomic_inc_not_zero() is
implemented with a atomic_try_cmpxchg() loop. High contention of the
reference count leads to retry loops and scales badly. There is nothing to
improve on this implementation as the semantics have to be preserved.
Provide rcuref as a scalable alternative solution which is suitable for RCU
managed objects. Similar to refcount_t it comes with overflow and underflow
detection and mitigation.
rcuref treats the underlying atomic_t as an unsigned integer and partitions
this space into zones:
0x00000000 - 0x7FFFFFFF valid zone (1 .. (INT_MAX + 1) references)
0x80000000 - 0xBFFFFFFF saturation zone
0xC0000000 - 0xFFFFFFFE dead zone
0xFFFFFFFF no reference
rcuref_get() unconditionally increments the reference count with
atomic_add_negative_relaxed(). rcuref_put() unconditionally decrements the
reference count with atomic_add_negative_release().
This unconditional increment avoids the inc_not_zero() problem, but
requires a more complex implementation on the put() side when the count
drops from 0 to -1.
When this transition is detected then it is attempted to mark the reference
count dead, by setting it to the midpoint of the dead zone with a single
atomic_cmpxchg_release() operation. This operation can fail due to a
concurrent rcuref_get() elevating the reference count from -1 to 0 again.
If the unconditional increment in rcuref_get() hits a reference count which
is marked dead (or saturated) it will detect it after the fact and bring
back the reference count to the midpoint of the respective zone. The zones
provide enough tolerance which makes it practically impossible to escape
from a zone.
The racy implementation of rcuref_put() requires to protect rcuref_put()
against a grace period ending in order to prevent a subtle use after
free. As RCU is the only mechanism which allows to protect against that, it
is not possible to fully replace the atomic_inc_not_zero() based
implementation of refcount_t with this scheme.
The final drop is slightly more expensive than the atomic_dec_return()
counterpart, but that's not the case which this is optimized for. The
optimization is on the high frequeunt get()/put() pairs and their
scalability.
The performance of an uncontended rcuref_get()/put() pair where the put()
is not dropping the last reference is still on par with the plain atomic
operations, while at the same time providing overflow and underflow
detection and mitigation.
The performance of rcuref compared to plain atomic_inc_not_zero() and
atomic_dec_return() based reference counting under contention:
- Micro benchmark: All CPUs running a increment/decrement loop on an
elevated reference count, which means the 0 to -1 transition never
happens.
The performance gain depends on microarchitecture and the number of
CPUs and has been observed in the range of 1.3X to 4.7X
- Conversion of dst_entry::__refcnt to rcuref and testing with the
localhost memtier/memcached benchmark. That benchmark shows the
reference count contention prominently.
The performance gain depends on microarchitecture and the number of
CPUs and has been observed in the range of 1.1X to 2.6X over the
previous fix for the false sharing issue vs. struct
dst_entry::__refcnt.
When memtier is run over a real 1Gb network connection, there is a
small gain on top of the false sharing fix. The two changes combined
result in a 2%-5% total gain for that networked test.
Reported-by: Wangyang Guo <wangyang.guo@intel.com>
Reported-by: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230323102800.158429195@linutronix.de
atomic_add_negative() does not provide the relaxed/acquire/release
variants.
Provide them in preparation for a new scalable reference count algorithm.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230323102800.101763813@linutronix.de
"simple-panel" compatible is not documented and nothing in Linux kernel
binds to it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Just skip the opcode(BPF_ST | BPF_NOSPEC) in the BPF JIT instead of
failing to JIT the entire program, given LoongArch currently has no
couterpart of a speculation barrier instruction. To verify the issue,
use the ltp testcase as shown below.
Also, Wang says:
I can confirm there's currently no speculation barrier equivalent
on LonogArch. (Loongson says there are builtin mitigations for
Spectre-V1 and V2 on their chips, and AFAIK efforts to port the
exploits to mips/LoongArch have all failed a few years ago.)
Without this patch:
$ ./bpf_prog02
[...]
bpf_common.c:123: TBROK: Failed verification: ??? (524)
[...]
Summary:
passed 0
failed 0
broken 1
skipped 0
warnings 0
With this patch:
$ ./bpf_prog02
[...]
Summary:
passed 0
failed 0
broken 0
skipped 0
warnings 0
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: WANG Xuerui <git@xen0n.name>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/bpf/20230328071335.2664966-1-guodongtai@kylinos.cn
While reviewing the udp-iter batching patches, noticed the bpf_iter_tcp
calling sock_put() is incorrect. It should call sock_gen_put instead
because bpf_iter_tcp is iterating the ehash table which has the req sk
and tw sk. This patch replaces all sock_put with sock_gen_put in the
bpf_iter_tcp codepath.
Fixes: 04c7820b77 ("bpf: tcp: Bpf iter batching and lock_sock")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230328004232.2134233-1-martin.lau@linux.dev
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230327170222.4107746-1-robh@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This was not matched anywhere and provides no additional information. The
driver code already checks also for "ti,omap3630" compatible.
Signed-off-by: Andrew Davis <afd@ti.com>
Message-Id: <20230216153339.19987-2-afd@ti.com>
[tony@atomide.com: updated comments for ti,omap3630 compatible]
Signed-off-by: Tony Lindgren <tony@atomide.com>
To determine whether the guest has caused an external interruption loop
upon code 20 (external interrupt) intercepts, the ext_new_psw needs to
be inspected to see whether external interrupts are enabled.
Under non-PV, ext_new_psw can simply be taken from guest lowcore. Under
PV, KVM can only access the encrypted guest lowcore and hence the
ext_new_psw must not be taken from guest lowcore.
handle_external_interrupt() incorrectly did that and hence was not able
to reliably tell whether an external interruption loop is happening or
not. False negatives cause spurious failures of my kvm-unit-test
for extint loops[1] under PV.
Since code 20 is only caused under PV if and only if the guest's
ext_new_psw is enabled for external interrupts, false positive detection
of a external interruption loop can not happen.
Fix this issue by instead looking at the guest PSW in the state
description. Since the PSW swap for external interrupt is done by the
ultravisor before the intercept is caused, this reliably tells whether
the guest is enabled for external interrupts in the ext_new_psw.
Also update the comments to explain better what is happening.
[1] https://lore.kernel.org/kvm/20220812062151.1980937-4-nrb@linux.ibm.com/
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes: 201ae986ea ("KVM: s390: protvirt: Implement interrupt injection")
Link: https://lore.kernel.org/r/20230213085520.100756-2-nrb@linux.ibm.com
Message-Id: <20230213085520.100756-2-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The clocks and clock-names are not documented and not used, drop them.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
disable-over-current is for chipidea IP, i.MX8MQ use dwc3, this property
is not valid. Drop it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
disable-over-current is for chipidea IP, i.MX8MQ use dwc3, this property
is not valid. Drop it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With ISO 15765-2:2016 the PDU size is not limited to 2^12 - 1 (4095)
bytes but can be represented as a 32 bit unsigned integer value which
allows 2^32 - 1 bytes (~4GB). The use-cases like automotive unified
diagnostic services (UDS) and flashing of ECUs still use the small
static buffers which are provided at socket creation time.
When a use-case requires to transfer PDUs up to 1025 kByte the maximum
PDU size can now be extended by setting the module parameter
max_pdu_size. The extended size buffers are only allocated on a
per-socket/connection base when needed at run-time.
changes since v2: https://lore.kernel.org/all/20230313172510.3851-1-socketcan@hartkopp.net
- use ARRAY_SIZE() to reference DEFAULT_MAX_PDU_SIZE only at one place
changes since v1: https://lore.kernel.org/all/20230311143446.3183-1-socketcan@hartkopp.net
- limit the minimum 'max_pdu_size' to 4095 to maintain the classic
behavior before ISO 15765-2:2016
Link: https://github.com/raspberrypi/linux/issues/5371
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230326115911.15094-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The class_unregister() and class_destroy() function should be taking a
const * to struct class, not just a *, so fix that up.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230325084526.3622123-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c93bd17541 ("powerpc/fsl: move to use bus_get_dev_root()")
changed to use bus_get_dev_root() but didn't consider that the function
can fail and return an uninitialized value of ret (hint, the function
can never fail, but the compiler doesn't know that.)
Fix this up by setting ret to -EINVAL just in case something really goes
wrong with the call to bus_get_dev_root().
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Fixes: c93bd17541 ("powerpc/fsl: move to use bus_get_dev_root()")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303280045.4oaaezcn-lkp@intel.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230327181606.1424846-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kzalloc(...) rather than kcalloc(1, ...) because the number of
elements we are specifying in this case is 1, so kzalloc would
accomplish the same thing and we can simplify.
Signed-off-by: Kenneth Lee <klee33@uw.edu>
Message-Id: <20220809072050.1733996-1-klee33@uw.edu>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Return the value amx3_common_init() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Message-Id: <20220920065113.215685-1-ye.xingchen@zte.com.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Delete the redundant word 'from'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Message-Id: <20220914084315.40165-1-yuanjilin@cdjrlc.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit d42f265a5d ("ARM: OMAP3: clock: remove un-used core dpll
re-program code") removes arch/arm/mach-omap2/sram34xx.S, which
implemented the effect of the config OMAP3_SDRC_AC_TIMING. Since then, the
OMAP3_SDRC_AC_TIMING config was hanging around without effect.
Remove this obsolete config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Message-Id: <20230320083806.9545-1-lukas.bulwahn@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
register_sysctl_paths() is only needed if your child (directories) have
entries but this does not so just use register_sysctl() so to do away
with the path specification.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230302202826.776286-10-mcgrof@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
This patch introduces a new helper function which can be used both in
lookups and in atomic_open operations by filesystems that want to handle
filename encryption and no-key dentries themselves.
The reason for this function to be used in atomic open is that this
operation can act as a lookup if handed a dentry that is negative. And in
this case we may need to set DCACHE_NOKEY_NAME.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Tested-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
[ebiggers: improved the function comment, and moved the function to just
below __fscrypt_prepare_lookup()]
Link: https://lore.kernel.org/r/20230320220149.21863-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Double-free error in bpf_linker__free() was reported by James Hilliard.
The error is caused by miss-use of realloc() in extend_sec().
The error occurs when two files with empty sections of the same name
are linked:
- when first file is processed:
- extend_sec() calls realloc(dst->raw_data, dst_align_sz)
with dst->raw_data == NULL and dst_align_sz == 0;
- dst->raw_data is set to a special pointer to a memory block of
size zero;
- when second file is processed:
- extend_sec() calls realloc(dst->raw_data, dst_align_sz)
with dst->raw_data == <special pointer> and dst_align_sz == 0;
- realloc() "frees" dst->raw_data special pointer and returns NULL;
- extend_sec() exits with -ENOMEM, and the old dst->raw_data value
is preserved (it is now invalid);
- eventually, bpf_linker__free() attempts to free dst->raw_data again.
This patch fixes the bug by avoiding -ENOMEM exit for dst_align_sz == 0.
The fix was suggested by Andrii Nakryiko <andrii.nakryiko@gmail.com>.
Reported-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: James Hilliard <james.hilliard1@gmail.com>
Link: https://lore.kernel.org/bpf/CADvTj4o7ZWUikKwNTwFq0O_AaX+46t_+Ca9gvWMYdWdRtTGeHQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230328004738.381898-3-eddyz87@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQhRSETHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6Ap9B/kB0/KPmJuPw8uhCcZV0LqzRHeitJU/
iTGCNX0yxE9k2MuBZJBdk/j1mis9aD0l1K3QAHz5kUNNE1i1LR6ljvbazjJBw/5/
jVPi4zUm1bvveMYLvL7bpin1wc4UsbGHaFAfSLENfPVkB8gHMWOCOMKbdqcJ/utk
bpTn6vW3YZRlw6wcKykig73lPKiVrBs5HDVKMFb40vhTtPZs41a9jNksupXOUgzL
4oQq97BeItzgOWrttocMnF68WA+8gYvS8d5Y85qr1cpEwfi4vbLHb063+TItZYfF
5JlueeoavQDwSnwH6bGuEIa/SzoGfOqrXlVg6Slse393RRrK8jTE2AoX
=CY8n
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.4-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-03-27
The first 2 patches by Geert Uytterhoeven add transceiver support and
improve the error messages in the rcar_canfd driver.
Cai Huoqing contributes 3 patches which remove a redundant call to
pci_clear_master() in the c_can, ctucanfd and kvaser_pciefd driver.
Frank Jungclaus's patch replaces the struct esd_usb_msg with a union
in the esd_usb driver to improve readability.
Markus Schneider-Pargmann contributes 5 patches to improve the
performance in the m_can driver, especially for SPI attached
controllers like the tcan4x5x.
* tag 'linux-can-next-for-6.4-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: Keep interrupts enabled during peripheral read
can: m_can: Disable unused interrupts
can: m_can: Remove double interrupt enable
can: m_can: Always acknowledge all interrupts
can: m_can: Remove repeated check for is_peripheral
can: esd_usb: Improve code readability by means of replacing struct esd_usb_msg with a union
can: kvaser_pciefd: Remove redundant pci_clear_master
can: ctucanfd: Remove redundant pci_clear_master
can: c_can: Remove redundant pci_clear_master
can: rcar_canfd: Improve error messages
can: rcar_canfd: Add transceiver support
====================
Link: https://lore.kernel.org/r/20230327073354.1003134-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin says:
====================
Add tx push buf len param to ethtool
This patchset adds a new sub-configuration to ethtool get/set queue
params (ethtool -g) called 'tx-push-buf-len'.
This configuration specifies the maximum number of bytes of a
transmitted packet a driver can push directly to the underlying
device ('push' mode). The motivation for pushing some of the bytes to
the device has the advantages of
- Allowing a smart device to take fast actions based on the packet's
header
- Reducing latency for small packets that can be copied completely into
the device
This new param is practically similar to tx-copybreak value that can be
set using ethtool's tunable but conceptually serves a different purpose.
While tx-copybreak is used to reduce the overhead of DMA mapping and
makes no sense to use if less than the whole segment gets copied,
tx-push-buf-len allows to improve performance by analyzing the packet's
data (usually headers) before performing the DMA operation.
The configuration can be queried and set using the commands:
$ ethtool -g [interface]
# ethtool -G [interface] tx-push-buf-len [number of bytes]
This patchset also adds support for the new configuration in ENA driver
for which this parameter ensures efficient resources management on the
device side.
====================
Link: https://lore.kernel.org/r/20230323163610.1281468-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LLQ is auto enabled by the device and disabling it isn't supported on
new ENA generations while on old ones causes sub-optimal performance.
This patch adds advertisement of push-mode when LLQ mode is used, but
rejects an attempt to modify it.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENA driver allows for two distinct values for the number of bytes
of the packet's payload that can be written directly to the device.
For a value of 224 the driver turns on Large LLQ Header mode in which
the first 224 of the packet's payload are written to the LLQ.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the ability to modify LLQ entry size, the size of packet's
payload that can be written directly to the device changes.
This patch makes the driver recalculate this information every device
negotiation (also called device reset).
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
