This panel is found in Lenovo Flex 5G laptop, so add the entry for it
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230324165909.131831-1-vkoul@kernel.org
A kzalloc()+memcpy() can be optimized in a single kmemdup().
This saves a few cycles because some memory doesn't need to be zeroed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Variable dppclk_delay_subtotal is not effectively used, so delete it.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:1004:15: warning: variable 'dppclk_delay_subtotal' set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4584
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Skip TMR unload for Navi12 and CHIP_SIENNA_CICHLID SRIOV as TMR is
not loaded at all
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace struct s32_pmx_func with generic struct pinfunction since they
have the same data fields.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-5-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use generic data structure to describe pin control groups in S32 SoC family
and drop duplicated struct members.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-4-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move common codes into smaller inline functions and remove argument checks
that are not actually used by pull up/down bits in the S32 MSCR register.
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-3-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Improve error/return code handlings and config checks in order to have
better reliability and simplify driver codes such as removing/changing
improper macros, blanks, print formats and helper calls.
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-2-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add pin groups for audio on R-Car V4H,
- Drop support for the obsolete R-Car H3 ES1.* (R8A77950) SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZCFTVQAKCRCKwlD9ZEnx
cOF/AQCVgxHD3qjF36rJI+QU6/vxmXsrW6d/b9mKgtRYkgRi+QEAkziIjGGu0pOt
Vnjf8O0o45Kxj1V0geDoM6NAqKmxvg0=
=9ugh
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.4
- Add pin groups for audio on R-Car V4H,
- Drop support for the obsolete R-Car H3 ES1.* (R8A77950) SoC,
- Miscellaneous fixes and improvements.
The MangoPi MQ-R-T113 is a small SBC with the Allwinner T113-s3 SoC.
The SoC features two Arm Cortex-A7 cores and 128 MB of co-packaged DDR3
DRAM. The board adds mostly connectors and the required regulators, plus
a Realtek RTL8189FTV WiFi chip.
Power comes in via a USB-C connector wired as a peripheral, and there is
a second USB-C connector usable as a host port.
Add a .dtsi file describing most of the board's peripherals, and include
that from the actual board .dts file. This allows to re-use the .dtsi
for the MQ-R-F113 RISC-V variant of that board.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230320005249.13403-5-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The MangoPi MQ-R board is a small development board, using Allwinner
SoCs with co-packaged DRAM. There are versions with a RISC-V core and
ones with two Arm Cortex-A7 cores.
Add the board/SoC compatible string pair to the list of known boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230320005249.13403-4-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Allwinner T113-s SoC is apparently using the same (or at least a very
similar) die as the D1/D1s, but replaces the single RISC-V core with
two Arm Cortex-A7 cores.
Since the D1 core .dtsi already describes all common peripherals, we
just need a DT describing the ARM specific peripherals: the CPU cores,
the Generic Timer, the GIC and the PMU.
We include the core .dtsi directly from the riscv DT directory.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230320005249.13403-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Allwinner D1/D1s SoCs (with a RISC-V core) use an (almost?) identical
die as their R528/T113-s siblings with ARM Cortex-A7 cores.
To allow sharing the basic SoC .dtsi files across those two
architectures as well, introduce a symlink to the RISC-V DT directory.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230320005249.13403-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tianma FHD panel is supposed to be used with fallback compatible:
sdm845-xiaomi-beryllium-tianma.dtb: panel@0: compatible: ['tianma,fhd-video'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-11-krzysztof.kozlowski@linaro.org
Panel does not have children with unit-addresses thus address/size-cells
are not valid:
sdm845-xiaomi-beryllium-tianma.dtb: panel@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-10-krzysztof.kozlowski@linaro.org
Panel does not have children with unit-addresses thus address/size-cells
are not valid:
panel@0: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-9-krzysztof.kozlowski@linaro.org
innolux,n116bca-ea1 is not exactly compatible witg innolux,n116bge, as
they have their own driver data. Bindings do not allow fallback:
sc7180-trogdor-lazor-limozeen-nots-r4.dtb: panel: compatible: ['innolux,n116bca-ea1', 'innolux,n116bge'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-8-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc7280-herobrine-zombie-nvme-lte.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-7-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc7180-trogdor-wormdingler-rev1-boe.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-6-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc7180-trogdor-quackingstick-r0.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-5-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc7180-idp.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
sc7180-idp.dtb: panel@0: 'port' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-4-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc8280xp-crd.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-3-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc8280xp-lenovo-thinkpad-x13s.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-2-krzysztof.kozlowski@linaro.org
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sdm845-cheza-r2.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-1-krzysztof.kozlowski@linaro.org
The pmk8280 PMIC PON peripheral is gen3 and uses two sets of registers;
hlos and pbs.
This specifically fixes the following error message during boot when the
pbs registers are not defined:
PON_PBS address missing, can't read HW debounce time
Note that this also enables the spurious interrupt workaround introduced
by commit 0b65118e6b ("Input: pm8941-pwrkey - add software key press
debouncing support") (which may or may not be needed).
Fixes: ccd3517faf ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327122948.4323-1-johan+linaro@kernel.org
LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to
combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall. When
using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for
each partition found on the loop device after the second ioctl(), but
when using LOOP_CONFIGURE, no such uevent was being sent.
In the old setup, uevents are disabled for LOOP_SET_FD, but not for
LOOP_SET_STATUS64. This makes sense, as it prevents uevents being
sent for a partially configured device during LOOP_SET_FD - they're
only sent at the end of LOOP_SET_STATUS64. But for LOOP_CONFIGURE,
uevents were disabled for the entire operation, so that final
notification was never issued. To fix this, reduce the critical
section to exclude the loop_reread_partitions() call, which causes
the uevents to be issued, to after uevents are re-enabled, matching
the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination.
I noticed this because Busybox's losetup program recently changed from
using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke
my setup, for which I want a notification from the kernel any time a
new partition becomes available.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
[hch: reduced the critical section]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 3448914e8c ("loop: Add LOOP_CONFIGURE ioctl")
Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is only one caller for __blk_account_io_done(), the function
is small enough to fit in its caller blk_account_io_done().
Remove the function and opencode in the its caller
blk_account_io_done().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230327073427.4403-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is only one caller for __blk_account_io_start(), the function
is small enough to fit in its caller blk_account_io_start().
Remove the function and opencode in the its caller
blk_account_io_start().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230327073427.4403-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Fix VM hang in case of timer delta being zero
ARM:
* Fixes for the MMU:
* Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
* Disable interrupts when walking user page tables to protect against
the page table being freed
* Read the MTE permissions for the VMA within the mmap lock critical
section, avoiding the use of a potentally stale VMA pointer
* Fixes for the vPMU:
* Return the sum of the current perf event value and PMC snapshot for
reads from userspace
* Don't save the value of guest writes to PMCR_EL0.{C,P}, which could
otherwise lead to userspace erroneously resetting the vPMU during VM
save/restore
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmQh12wUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMPyAgAhe9P5efFlkg/N/BUoxCdiQjhTEGO
BbNtZFbSgdqsTA0No5sjSsq8+dYuj4IpYHxvTRNXffxpn/6x736x9ff6fH3QwY0P
n65q37m3XrBzbaUv2XlX6l4GJC/KHWpXsawVszmnQpw8wYUYglo9JWnWVvpo/vLV
byWXcG9Rt0MQVnV13bYtjnpdNYCdVuhZuvjDBvbBa2I9BRKShvWyzcRcc48K1RNq
UI5PCEb8c2NUOB/6b9lRkEaNYLssVLOxpI3abGJP+IVSl/WE+hgCbFpz7ZkYwt79
AYm4wnZTSKBMQb5P2IOlgkfasvEyFiZ4Jj7x3RLXcXSWIB6g0J20iNasYg==
=qX9k
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix VM hang in case of timer delta being zero
ARM:
- MMU fixes:
- Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
- Disable interrupts when walking user page tables to protect
against the page table being freed
- Read the MTE permissions for the VMA within the mmap lock
critical section, avoiding the use of a potentally stale VMA
pointer
- vPMU fixes:
- Return the sum of the current perf event value and PMC snapshot
for reads from userspace
- Don't save the value of guest writes to PMCR_EL0.{C,P}, which
could otherwise lead to userspace erroneously resetting the vPMU
during VM save/restore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
riscv/kvm: Fix VM hang in case of timer delta being zero.
KVM: arm64: Check for kvm_vma_mte_allowed in the critical section
KVM: arm64: Disable interrupts while walking userspace PTs
KVM: arm64: Retry fault if vma_lookup() results become invalid
KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU
KVM: arm64: PMU: Fix GET_ONE_REG for vPMC regs to return the current value
This driver provides support for clock controller on Loongson-2 SoC,
the Loongson-2 SoC uses a 100MHz clock as the PLL reference clock,
there are five independent PLLs inside, each of which PLL can
provide up to three sets of frequency dependent clock outputs.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20230323025229.2971-2-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Loongson-2 boot clock was used to spi and lio peripheral and
this patch was to add boot clock index number.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230323025229.2971-1-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Change the multipliers and divisors to support a higher
frequency accuracy if there is only one output.
Currently only O is changed now we are changing M, D and O.
For multiple output case the earlier behavior is retained.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20230327062637.22237-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The range is taken care in the zynqmp_pll_round_rate. Remove the rate range
in the zynqmp_clk_register_pll() to prevent the early truncation of the
frequencies and also allow multiple combinations of child and parent to get
more accurate rates.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20230324104958.25099-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
1) Remove unnecessary blank lines.
2) Reformat one comment for consistency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Refactor acpi_data_prop_read_single() for decreased indentation
and better structure. No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OSPM executes an EXECUTE_OPERATION action to instruct the platform to begin
the injection operation, then executes a GET_COMMAND_STATUS action to
determine the status of the completed operation. The ACPI Specification
documented error codes[1] are:
0 = Success (Linux #define EINJ_STATUS_SUCCESS)
1 = Unknown failure (Linux #define EINJ_STATUS_FAIL)
2 = Invalid Access (Linux #define EINJ_STATUS_INVAL)
The original code report -EBUSY for both "Unknown Failure" and "Invalid
Access" cases. Actually, firmware could do some platform dependent sanity
checks and returns different error codes, e.g. "Invalid Access" to indicate
to the user that the parameters they supplied cannot be used for injection.
To this end, fix to return -EINVAL in the __einj_error_inject() error
handling case instead of always -EBUSY, when explicitly indicated by the
platform in the status of the completed operation.
[1] ACPI Specification 6.5 18.6.1. Error Injection Table
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Confidential Computing Event Log (CCEL) table provides the address
and length of the CCEL records area in UEFI reserved memory.
To allow user space access to these records, expose a sysfs interface
similar to the BERT table.
More details about the CCEL table can be found in the ACPI specification
r6.5 [1], sec 5.2.34.
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#cc-event-log-acpi-table # [1]
Co-developed-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The verifier test creates BPF ringbuf maps using hard-coded
4096 as max_entries. Some tests will fail if the page size
of the running kernel is not 4096. Use getpagesize() instead.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230326095341.816023-1-hengqi.chen@gmail.com
This patch prevents races on the print function pointer, allowing the
libbpf_set_print() function to become thread-safe.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230325010845.46000-1-inwardvessel@gmail.com
This commit adds an srcu_lockdep.sh script that checks whether lockdep
correctly classifies SRCU-based, SRCU/mutex-based, and SRCU/rwsem-based
deadlocks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ boqun: Fix "RCUTORTURE" with "$RCUTORTURE" ]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Add a test number 3 that creates deadlock cycles involving one RCU
Tasks Trace step and L-1 SRCU steps. Please note that lockdep will not
detect these deadlocks until synchronize_rcu_tasks_trace() is marked
with lockdep's new "sync" annotation, which will probably not happen
until some time after these markings prove their worth on SRCU.
Please note that these tests are available only in kernels built with
CONFIG_TASKS_TRACE_RCU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
