Change sm8550 interconnect driver to use generic qcom_icc_rpmh_*
functions rather than embedding a copy of thema. This also fixes an
overallocation of memory for icc_onecell_data structure.
Fixes: e6f0d6a30f ("interconnect: qcom: Add SM8550 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-4-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Change sm8450 interconnect driver to use generic qcom_icc_rpmh_*
functions rather than embedding a copy of thema. This also fixes an
overallocation of memory for icc_onecell_data structure.
Fixes: fafc114a46 ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-3-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This is a struct with a trailing zero-length array of icc_node pointers
but it's allocated as if it were a single array of icc_nodes instead.
Fortunately this overallocates memory rather then allocating less memory
than required.
Fix by replacing devm_kcalloc() with devm_kzalloc() and struct_size()
macro.
Fixes: 5bc9900add ("interconnect: qcom: Add OSM L3 interconnect provider support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-2-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Since commit 502df79b86 ("gpiolib: Warn on drivers still using static
gpiobase allocation"), one or more warnings are printed during boot on
systems where static allocation of GPIO base is used:
[ 0.197707] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.199942] stm32f429-pinctrl soc:pinctrl@40020000: GPIOA bank added
[ 0.200711] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.202855] stm32f429-pinctrl soc:pinctrl@40020000: GPIOB bank added
[ 0.203591] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.205704] stm32f429-pinctrl soc:pinctrl@40020000: GPIOC bank added
[ 0.206338] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.208448] stm32f429-pinctrl soc:pinctrl@40020000: GPIOD bank added
[ 0.209182] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.211282] stm32f429-pinctrl soc:pinctrl@40020000: GPIOE bank added
[ 0.212094] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.214270] stm32f429-pinctrl soc:pinctrl@40020000: GPIOF bank added
[ 0.215005] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.217110] stm32f429-pinctrl soc:pinctrl@40020000: GPIOG bank added
[ 0.217845] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.219959] stm32f429-pinctrl soc:pinctrl@40020000: GPIOH bank added
[ 0.220602] gpio gpiochip8: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.222714] stm32f429-pinctrl soc:pinctrl@40020000: GPIOI bank added
[ 0.223483] gpio gpiochip9: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.225594] stm32f429-pinctrl soc:pinctrl@40020000: GPIOJ bank added
[ 0.226336] gpio gpiochip10: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.228490] stm32f429-pinctrl soc:pinctrl@40020000: GPIOK bank added
So let's follow the suggestion and use dynamic allocation.
Tested on STM32F429I-DISC1 board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230227205131.2104082-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In case the driver was trying to set an alternate mode for gpio
0 or 32 then the mode was not set correctly. The reason is that
there is computation error inside the function ocelot_pinmux_set_mux
because in this case it was trying to shift to left by -1.
Fix this by actually shifting the function bits and not the position.
Fixes: 4b36082e2e ("pinctrl: ocelot: fix pinmuxing for pins after 31")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230206203720.1177718-1-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge series from William Breathitt Gray <william.gray@linaro.org>:
There are devices which have interrupt support with mask and ack
registers but no status register. Add a flag which lets us support
them, we just assume that all the interrupts fired.
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
One minor correction to a comment and updating the allowed register
sizes for the SoundWire register map, to allow support of additional
hardware.
Since commit d59f6617ee ("genirq: Allow fwnode to carry name
information only") an IRQ domain is always given a name during
allocation (e.g. used for the debugfs entry).
Drop the no longer valid name assignment, which would lead to an attempt
to free a string constant when removing the domain on late probe
failures (e.g. probe deferral).
Fixes: d59f6617ee ("genirq: Allow fwnode to carry name information only")
Cc: stable@vger.kernel.org # 4.13
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5
Link: https://lore.kernel.org/r/20230224130828.27985-1-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
soc-core.c is using dev_dbg(), but some of them are useless.
It indicates many dev_dbg() at snd_soc_runtime_get_dai_fmt(),
but all of them are just noise, almost no meanings.
dev_dbg() on soc_probe_link_dais() indicates dai link and its
loop order, but it is just noise, no information.
dev_dbg() on snd_soc_register_dai() is duplicated.
This patch cleanup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ttyy64cy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function svs_add_device_link is called only internally from the SoC
specific probe functions. We don't need to check if the node_name is
null because that would mean that we have a buggy SoC probe function in
the first place.
Reviewed-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230209162403.21113-1-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add MT8195 VPPSYS0 and VPPSYS1 mutex info to driver data
Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Change-Id: Ie371dc9dcf35ea308d9460acd60fb9c3d6475deb
Link: https://lore.kernel.org/r/20230206091109.1324-7-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add mtk_mutex_set_mod support to set MOD1
Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230206091109.1324-6-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Due to MT8195 HW design, some RSZs have additional settings that
need to be configured in MMSYS.
Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Change-Id: I41978bf14951221c88abbe70d8c24cb0770e11e3
Link: https://lore.kernel.org/r/20230206091109.1324-5-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add compatible for MT8195 VPPSYS on MUTEX.
Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230206091109.1324-2-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The timing of disabling SVS bank and restore default voltage is more
than one place. Therefore, add a common function to use for removing
the superfluous codes.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230202124104.16504-3-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
SVS might need to read both svs efuse and thermal efuse on the probe flow.
Therefore, add a common efuse read function to remove the superfluous
codes.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230202124104.16504-2-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
There's no home key on Bananapi BPI-R2. Disable it.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20230212121354.44590-1-arinc.unal@arinc9.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Change the existing node name in order to match NAND controller DT
bindings.
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230201021500.26769-4-xiangsheng.hou@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The node name should be generic and mmsys expcets 'syscon'
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230209160357.19307-2-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In MT8195, the MMSYS has two Video Processor Pipepline Subsystems
named VPPSYS0 and VPPSYS1, each with specific MUTEX to control
Start of Frame(SOF) and End of Frame (EOF) signals.
Before working with them, the addresses, interrupts, clocks and power
domains need to be set up in dts.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230206091109.1324-4-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
With the change of the MMSYS binding file for MT8195, the compatible
name of VPPSYS in dts need to be fixed to match the definition.
Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230206091109.1324-3-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Change the existing node name in order to match NAND controller DT
bindings.
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230201021500.26769-3-xiangsheng.hou@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Merge series from William Qiu <william.qiu@starfivetech.com>:
This patchset adds initial rudimentary support for the StarFive
Quad SPI controller driver. And this driver will be used in
StarFive's VisionFive 2 board.The first patch constrain
minItems/maxItems of resets for JH7110 QSPI and Patch 2 adds
support for StarFive JH7110 QSPI.
Merge series from Mark Brown <broonie@kernel.org>:
This series opens up build coverage of a bunch of SPI drivers by
allowing build under COMPILE_TEST where possible, while also adding
appropriate architecture specific dependencies to a couple of drivers
that didn't have them so they don't show up in builds when they're not
useful. We also have one fix for the dependencies of the s3c24xx driver
which was turned up in the process of doing this.
Merge series from Lucas Tanure <lucas.tanure@collabora.com>:
Provide small fixes and refactor the code for easier insertion of a new
platform using the same acp5x machine driver.
Merge series from richard.leitner@linux.dev:
This series adds support for the clocks properties in the
maxim,max9867 bindings. Furthermore the binding definitions are
converted from txt to yaml.
The clock property is needed to define the mclk for one of our
boards which uses the the i.MX8MP SAI MCLK as clock for the
maxim,max9867.
Merge series from Kamel Bouhara <kamel.bouhara@bootlin.com>:
This small series extends the tas571x driver to support the TAS5733
audio power amplifier.
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
This series does some cleanups for Microchip AT91 sound drivers. Along
with it I took the chance and updated MAINTAINERS file.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The first patch will improve the managing of DMI L1 by tracking it's
enabled/disabled state to avoid unconditional changes to it's state.
The remaining two patch will enable the DMI L1 for MTL platforms (ACE 1.0)
Merge series from Herve Codina <herve.codina@bootlin.com>:
This series adds support for audio using the QMC controller available in
some Freescale PowerQUICC SoCs.
This series contains three parts in order to show the different blocks
hierarchy and their usage in this support.
The first one is related to TSA (Time Slot Assigner).
The TSA handles the data present at the pin level (TDM with up to 64
time slots) and dispatchs them to one or more serial controller (SCC).
The second is related to QMC (QUICC Multichannel Controller).
The QMC handles the data at the serial controller (SCC) level and splits
again the data to creates some virtual channels.
The last one is related to the audio component (QMC audio).
It is the glue between the QMC controller and the ASoC component. It
handles one or more QMC virtual channels and creates one DAI per QMC
virtual channels handled.
Add myself as a maintainer and add NXP S32 Linux Team as a review group for
S32 pinctrl patches.
Signed-off-by: Chester Lin <clin@suse.com>
Link: https://lore.kernel.org/r/20230220023320.3499-4-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some options include "MediaTek", some "Mediatek". Rename all to "MediaTek"
to address the naming inconsistency.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230218065108.8958-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are options missing from PINCTRL_MT7981 whilst being on every other
pin controller. Add them.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230218065108.8958-1-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge series from Rob Herring <robh@kernel.org>:
This started as just removing open coded parsing and address translation
of "reg", and ended up with cleaning up the probe functions to use
modern, preferred APIs for driver probe.
It is compile tested only.
__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.
Our 030 bus error handler is ill equipped to deal with this:
Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.
In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.
Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.
I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.
Tested on 030 Atari Falcon.
Reported-by: Eero Tamminen <oak@helsinkinet.fi>
Link: https://lore.kernel.org/r/alpine.LNX.2.21.1904091023540.25@nippy.intranet
Link: https://lore.kernel.org/r/63130691-1984-c423-c1f2-73bfd8d3dcd3@gmail.com
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230301021107.26307-1-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):
initrd: 0ef0602c - 0f800000
Zone ranges:
DMA [mem 0x0000000008000000-0x000000f7ffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000008000000-0x000000000f7fffff]
Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
Unable to handle kernel access at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<00201d3c>] memcmp+0x28/0x56
As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init(). Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().
While at it, reduce #ifdef clutter by using IS_ENABLED() instead.
Fixes: 376e3fdecb ("m68k: Enable memtest functionality")
Reported-by: Stephen Walsh <vk3heg@vk3heg.net>
Link: https://lists.debian.org/debian-68k/2022/09/msg00007.html
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4f45f05f377bf3f5baf88dbd5c3c8aeac59d94f0.camel@physik.fu-berlin.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/dff216da09ab7a60217c3fc2147e671ae07d636f.1677528627.git.geert@linux-m68k.org
We have a temporary variable to keep pointer to struct device.
Utilise it inside the ->probe() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230215134242.37618-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The custom message has no value except printing the error code,
the same does dev_err_probe(). Let's use the latter for the sake
of unification.
Note that some APIs already have messaging in them and some simply
do not require the current noise.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230215134242.37618-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace devm_clk_get() by devm_clk_get_enabled() and drop
unneeded code pieces. This will make sure we keep the ordering
of the resource allocation correct.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230215134242.37618-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use devm_kasprintf() instead of kasprintf() to avoid any potential
leaks. At the moment drivers have no remove functionality hence
there is no need for fixes tag.
While at it, switch to use devm_kasprintf_strarray().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230215134242.37618-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The devices described in this binding represent 8-bit and 16-bit i2c i/o
expanders. Allow the user to specify names for up to 16 gpio lines.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230210025132.36605-1-twoerner@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add initial support for HDMI and S/PDIF audio output.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230306121351.1606360-4-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add missing content to the bluetooth node to align it with the content
used in (all) other GXBB dts files.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230306121351.1606360-3-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Alpha-sort the nodes, move the default line in the LED node to where it's
normally found, and remove excess spacing. No functional changes.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230306121351.1606360-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
