Floating-point half-precision multiplication (FHM) is a feature present
in AArch32 state for Armv8 and is represented by ISAR6.FHM identification register.
This feature denotes the presence of VFMAL and VMFSL instructions and
hence adding a hwcap will enable the userspace to check it before
trying to use those instructions.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Advanced Dot product is a feature present in AArch32 state for Armv8 and
is represented by ISAR6 identification register.
This feature denotes the presence of UDOT and SDOT instructions and hence adding a hwcap will enable the userspace to check it before trying to use those instructions.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Floating point half-precision (FPHP) and Advanced SIMD half-precision
(ASIMDHP) are VFP features (FEAT_FP16) represented by MVFR1 identification register. These capabilities can optionally exist with VFPv3 and mandatory with VFPv4. Both these new features exist for Armv8 architecture in AArch32 state.
These hwcaps may be useful for the userspace to add conditional check
before trying to use FEAT_FP16 feature specific instructions.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
AArch32 Instruction Set Attribute Register 6 (ID_ISAR6_EL1) and AArch32
Processor Feature Register 2 (ID_PFR2_EL1) identifies some new features
for the Armv8 architecture. This registers will be utilized to add
hwcaps for those cpu features.
These registers are marked as reserved for Armv7 and should be a RAZ.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The t600x CPU nodes are missing the cache hierarchy information. The
cache hierarchy on Arm can not be detected and needs to be described in
DT. The OS scheduler can make use of this information for scheduling
decisions.
The cache size information is based on various articles about the
processors. There's also an L3 system level cache (SLC). It's not
described here because SLCs typically have some MMIO interface which
would need to be described.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
* irq/loongarch-acpi:
: .
: More APCI fixes and improvements for the LoongArch architecture:
:
: - Work around trigger type for INTx interrupts described
: via ACPI (Jianmin Lv).
:
: - ACPI support got the HTVEC controller (Huacai Chen)
:
: - Suspend/resume across the board (Huacai Chen)
:
: - Fixes and random cleanups
: .
irqchip/loongarch: Adjust acpi_cascade_irqdomain_init() and sub-routines
irqchip/loongson-pch-lpc: Add suspend/resume support
irqchip/loongson-pch-pic: Add suspend/resume support
irqchip/loongson-eiointc: Add suspend/resume support
irqchip/loongson-htvec: Add suspend/resume support
irqchip/loongson-htvec: Add ACPI init support
irqchip/loongson-liointc: Support to set IRQ type for ACPI path
irqchip/loongson-pch-pic: Support to set IRQ type for ACPI path
irqchip/loongson-pch-pic: Fix translate callback for DT path
ACPI / PCI: fix LPIC IRQ model default PCI IRQ polarity
Signed-off-by: Marc Zyngier <maz@kernel.org>
1, Adjust the return of acpi_cascade_irqdomain_init() and check its
return value.
2, Combine unnecessary short lines to one long line.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020142514.1725514-1-chenhuacai@loongson.cn
On some SoCs the System CIRQ register layout is slightly different,
as there are more registers per function and in some cases other
differences later in the layout: this is seen on at least MT8192,
but it's also valid for some other "contemporary" SoCs both for
Chromebooks and for smartphones.
Add the new "v2" register layout and use it if the compatible
"mediatek,mt8192-cirq" is found.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221128092217.36552-5-angelogioacchino.delregno@collabora.com
In preparation to add support for new SoCs having a different
register layout, add an enumeration that documents register
offsets and move the definitions for the same to a u32 array;
Selecting the right register offsets array is done by adding an
of_device_id array containing all of the currently supported
compatible strings pointing to the "v1" offsets array (as data):
since no devicetree declares the `mediatek,mtk-cirq` compatible
without a SoC-specific one, it wasn't necessary to provide any
legacy fallback.
Every usage of the aforemementioned definitions was changed to
get a register address through a newly introduced `mtk_cirq_reg()`
accessor.
This change brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221128092217.36552-4-angelogioacchino.delregno@collabora.com
As the nla_nest_start() may fail with NULL returned, the return value needs
to be checked.
Fixes: c4ffee7c9b ("RDMA/netlink: Implement counter dumpit calback")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221126043410.85632-1-yuancan@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add compatible to support the SYS_CIRQ controller found on MT8192.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221128092217.36552-3-angelogioacchino.delregno@collabora.com
Migrate mediatek,cirq.txt to dt schema as mediatek,mtk-cirq.yaml.
While at it, I've also fixed some typos that were present in the
original txt binding, as it was suggesting that the compatible
string would have "mediatek,cirq" as compatible but, in reality,
that's supposed to be "mediatek,mtk-cirq" instead.
Little rewording on property descriptions also happened for
them to be more concise.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221128092217.36552-2-angelogioacchino.delregno@collabora.com
Fixes: b170143ae1 ("soc: apple: Add SART driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
skb passed to network layer contains incorrect length.
In mux aggregation protocol, the datagram block received
from device contains block signature, packet & datagram
header. The right skb len to be calculated by subracting
datagram pad len from datagram length.
Whereas in mux lite protocol, the skb contains single
datagram so skb len is calculated by subtracting the
packet offset from datagram header.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peek throughput UL test is resulting in crash. If the UL
transfer block free list is exhaust, the peeked skb is freed.
In the next transfer freed skb is referred from UL list which
results in crash.
Don't free the skb if UL transfer blocks are unavailable. The
pending skb will be picked for transfer on UL transfer block
available.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix build error reported on armhf while preparing 6.1-rc5
for Debian.
iosm_ipc_protocol.c:244:36: error: passing argument 3 of
'dma_alloc_coherent' from incompatible pointer type.
Change phy_ap_shm type from phys_addr_t to dma_addr_t.
Fixes: faed4c6f6f ("net: iosm: shared memory protocol")
Reported-by: Bonaccorso Salvatore <carnil@debian.org>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sparse warnings - iosm_ipc_mux_codec.c:1474 using plain
integer as NULL pointer.
Use skb_trim() to reset skb tail & len.
Fixes: 9413491e20 ("net: iosm: encode or decode datagram")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tim Harvey reports that link modes which he does not expect to be
supported are being advertised, and this is because of the workaround
we have for PHYs that switch interface modes.
Fix this up by checking whether rate matching will be used for the
requested interface mode, and if rate matching will be used, perform
validation only with the requested interface mode, rather than invoking
this workaround.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function nixge_hw_dma_bd_release() dereference of NULL pointer
priv->rx_bd_v is possible for the case of its allocation failure in
nixge_hw_dma_bd_init().
Move for() loop with priv->rx_bd_v dereference under the check for
its validity.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 492caffa8a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Yuri Karpov <YKarpov@ispras.ru>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both p9_fd_create_tcp() and p9_fd_create_unix() will call
p9_socket_open(). If the creation of p9_trans_fd fails,
p9_fd_create_tcp() and p9_fd_create_unix() will return an
error directly instead of releasing the cscoket, which will
result in a socket leak.
This patch adds sock_release() to fix the leak issue.
Fixes: 6b18662e23 ("9p connect fixes")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
ACKed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_register_client() failed, the NTB client device is not
unregistered.
Fix by unregister NTB client device when ntb_transport_register_client()
failed.
Fixes: 548c237c0a ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Added support to filter packets based on IP fragment.
For IPv4 packets check for ip_flag == 0x20 (more fragment bit set).
For IPv6 packets check for next_header == 0x2c (next_header set to
'fragment header for IPv6')
2. Added configuration support from both "ethtool ntuple" and "tc flower".
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All wed versions should enable the wcid overwritten feature,
since the wcid size is controlled by the wlan driver.
Tested-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The am65_cpsw_nuss_cleanup_ndev() function calls unregister_netdev()
even if register_netdev() fails, which triggers WARN_ON(1) in
unregister_netdevice_many(). To fix it, make sure that
unregister_netdev() is called only on registered netdev.
Compile tested only.
Fixes: 84b4aa4932 ("net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f0601ef863 ("drm/vc4: vec: Protect device resources after
removal") add fail path for vc4_vec_encoder_enable(), and will put
usage_counter only when pm_runtime_get_sync() succeeds. However,
pm_runtime_get_sync() will increment usage_counter even it failed. Fix
it by replacing it with pm_runtime_resume_and_get() to keep usage
counter balanced.
Fixes: e4b81f8c74 ("drm/vc4: Add support for the VEC (Video Encoder) IP")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221124015113.18540-1-shangxiaojing@huawei.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmN/JUsACgkQSD+KveBX
+j7J2Qf+OWoBCtXvzTZPdx9NGUnddGpWclZ6zaG9BHIo/V9wzbjpAy4saY4FwiO5
dwvZqt2U/L6WKSwZodeHvS7oGLDOWaaM/TNGxXHYZvk8haDQu9q7wYje+cYeR/cn
lOpVEGTXNBmydWcd8MWu9MbwlntnhUjbjIwuLfPHUJLRCS+GyH5us4M79Ynn3RSZ
DcWXDfTqotISkjbLNdVAY9tET3zsZKH7lwfTwRolYd1CHFbQntvSviuKMxHnUyrD
HsQ49IFv1T8ap9+tvVsLtchyhxz0iVeN+T2sVsNVcSZKD/73jCSf4oU6Z/F5lHhP
LgcN4Ug7YWQuW9Dl6IRQro6yAO19sA==
=7ABk
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2022-11-24
This series provides bug fixes to mlx5 driver.
Focusing on error handling and proper memory management in mlx5, in
general and in the newly added macsec module.
I still have few fixes left in my queue and I hope those will be the
last ones for mlx5 for this cycle.
Please pull and let me know if there is any problem.
Happy thanksgiving.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ovl_change_flags() is an open-coded variant of fs/fcntl.c:setfl() and it
got missed by commit 164f4064ca ("keep iocb_flags() result cached in
struct file"); the same change applies there.
Reported-by: Pierre Labastie <pierre.labastie@neuf.fr>
Fixes: 164f4064ca ("keep iocb_flags() result cached in struct file")
Cc: <stable@vger.kernel.org> # v6.0
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216738
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
It's fairly hard to figure out the instance of the CRTC affected by an
atomic change using the default name.
Since we can provide our own to the CRTC initialization functions, let's
do so to make the debugging sessions easier.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-20-051a0bb60a16@cerno.tech
Both users of vc4_crtc_init need the same extra initialization to set
the pointer to the platform_device and the CRTC data. Since it's
mandatory, let's make them both arguments of vc4_crtc_init().
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-17-051a0bb60a16@cerno.tech
The TXP is integrated as a separate CRTC/Encoder/Connector combo, but
for some reason doesn't rely on the vc4_encoder type and it's associated
type.
Let's create a type to make it consistent with the other encoders.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-15-051a0bb60a16@cerno.tech
On the vc4 devices (and later), the blending is done by a single device
called the HVS. The HVS has three FIFO that can operate in parallel, and
route their output to 6 CRTCs and 7 encoders on the BCM2711.
Each of these CRTCs and encoders have some constraints on which FIFO
they can feed from, so we need some code to take all those constraints
into account and assign FIFOs to CRTCs.
The problem can be simplified by assigning those FIFOs to CRTCs by
ascending output index number. We had a comment mentioning it already,
but we were never actually enforcing it.
It was working still in most situations because the probe order is
roughly equivalent, except for the (optional, and fairly rarely used on
the Pi4) VEC which was last in the probe order sequence, but one of the
earliest device to assign.
This resulted in configurations that were rejected by our code but were
still valid with a different assignment.
We can fix this by making sure we assign CRTCs to FIFOs by ordering
them by ascending HVS output index.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-10-051a0bb60a16@cerno.tech
The vc4_hvs_get_(old|new)_global_state functions don't modify the
drm_atomic_state passed as an argument, so let's make it const.
Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v1-13-051a0bb60a16@cerno.tech
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
In 27cfa25895 "ext2: fix fs corruption when trying to remove
a non-empty directory with IO error" a funny thing has happened:
- page = ext2_get_page(inode, i, dir_has_error, &page_addr);
+ page = ext2_get_page(inode, i, 0, &page_addr);
- if (IS_ERR(page)) {
- dir_has_error = 1;
- continue;
- }
+ if (IS_ERR(page))
+ goto not_empty;
And at not_empty: we hit ext2_put_page(page, page_addr), which does
put_page(page). Which, unless I'm very mistaken, should oops
immediately when given ERR_PTR(-E...) as page.
OK, shit happens, insufficiently tested patches included. But when
commit in question describes the fault-injection test that exercised
that particular failure exit...
Ow.
CC: stable@vger.kernel.org
Fixes: 27cfa25895 ("ext2: fix fs corruption when trying to remove a non-empty directory with IO error")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
ovl_dentry_revalidate_common() can be called in rcu-walk mode. As document
said, "in rcu-walk mode, d_parent and d_inode should not be used without
care".
Check inode here to protect access under rcu-walk mode.
Fixes: bccece1ead ("ovl: allow remote upper")
Reported-and-tested-by: syzbot+a4055c78774bbf3498bb@syzkaller.appspotmail.com
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: <stable@vger.kernel.org> # v5.7
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This will cause an informative backtrace to print if the user of
ib_device_set_netdev() isn't careful about tearing down the ibdevice
before its the netdevice parent is destroyed. Such as like this:
unregister_netdevice: waiting for vlan0 to become free. Usage count = 2
leaked reference.
ib_device_set_netdev+0x266/0x730
siw_newlink+0x4e0/0xfd0
nldev_newlink+0x35c/0x5c0
rdma_nl_rcv_msg+0x36d/0x690
rdma_nl_rcv+0x2ee/0x430
netlink_unicast+0x543/0x7f0
netlink_sendmsg+0x918/0xe20
sock_sendmsg+0xcf/0x120
____sys_sendmsg+0x70d/0x8b0
___sys_sendmsg+0x11d/0x1b0
__sys_sendmsg+0xfa/0x1d0
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This will help debug the issues syzkaller is seeing.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-a7c81b3842ce+e5-netdev_tracker_jgg@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The PLIC does not define any special method for marking interrupts as
wakeup-capable, so it should have the IRQCHIP_SKIP_SET_WAKE flag set.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221126194805.19431-1-samuel@sholland.org
The RF sniffers are based on cp210x where the RF frontends
are based on a different USB stack.
RF sniffers can analyze packets meta data including power level
and perform packet injection.
Can be used to perform RF frontend self-test when connected to
a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-23 (ixgbevf, i40e, fm10k, iavf, e100)
This series contains updates to various Intel drivers.
Shang XiaoJing fixes init module error path stop to resource leaks for
ixgbevf and i40e.
Yuan Can also does the same for fm10k and iavf.
Wang Hai stops freeing of skb as it was causing use after free error for
e100.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is a backtrace report about memory leak detected in
gpiochip_setup_dev():
unreferenced object 0xffff88810b406400 (size 512):
comm "python3", pid 1682, jiffies 4295346908 (age 24.090s)
backtrace:
kmalloc_trace
device_add device_private_init at drivers/base/core.c:3361
(inlined by) device_add at drivers/base/core.c:3411
cdev_device_add
gpiolib_cdev_register
gpiochip_setup_dev
gpiochip_add_data_with_key
gcdev_register() & gcdev_unregister() would call device_add() &
device_del() (no matter CONFIG_GPIO_CDEV is enabled or not) to
register/unregister device.
However, if device_add() succeeds, some resource (like
struct device_private allocated by device_private_init())
is not released by device_del().
Therefore, after device_add() succeeds by gcdev_register(), it
needs to call put_device() to release resource in the error handle
path.
Here we move forward the register of release function, and let it
release every piece of resource by put_device() instead of kfree().
While at it, fix another subtle issue, i.e. when gc->ngpio is equal
to 0, we still call kcalloc() and, in case of further error, kfree()
on the ZERO_PTR pointer, which is not NULL. It's not a bug per se,
but rather waste of the resources and potentially wrong expectation
about contents of the gdev->descs variable.
Fixes: 159f3cd92f ("gpiolib: Defer gpio device setup until after gpiolib initialization")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We should check that the filehandles match before transferring the
sillyrename data to the newly looked-up dentry in case the name was
reused on the server.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When mounting from a NFSv4 referral, path->dentry can end up being a
negative dentry, so derive the struct nfs_server from the dentry
itself instead.
Fixes: 2b0143b5c9 ("VFS: normal filesystems (and lustre): d_inode() annotations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we're asked to recover open state while a delegation return is
outstanding, then the state manager thread cannot use a cached open, so
if the server returns a delegation, we can end up deadlocked behind the
pending delegreturn.
To avoid this problem, let's just ask the server not to give us a
delegation unless we're explicitly reclaiming one.
Fixes: be36e185bd ("NFSv4: nfs4_open_recover_helper() must set share access")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
