Commit graph

311,532 commits

Author SHA1 Message Date
Inki Dae
c01d73faad drm/exynos: added cache attribute support for gem.
with this patch, user application can set cache attribute(such as
cachable, writecombime or non-cachable) of the memory region allocated
by gem framework.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-08 18:46:32 +09:00
Jonas Bonn
207e715ff1 openrisc: use scratch regs in atomic syscall
The function sys_or1k_atomic was using call-saved registers without
restoring their value before returning.  This is a faux pas: either
we need to restore their values or use scratch regs; the latter is
less code so that's the route this patch takes.

Thanks to David Hennerström for doing most of the heavy-lifting in
tracking this one down.

Reported-by: Davd Hennerström <david.hennerstrom@aacmicrotec.com>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-05-08 11:43:59 +02:00
Jonas Bonn
7b903e6c02 openrisc: provide dma_map_ops
This switches OpenRISC over to fully using the generic dma-mapping
framework.  This was almost already the case as the architecture's
implementation was essentially a copy of the generic header.

This also brings this architecture in line with the recent changes
to dma_map_ops (adding attributes to ops->alloc).

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-05-08 11:43:51 +02:00
Jonas Bonn
b0e026f4dc openrisc: header file cleanups
elf.h: We can export some of these symbols to userspace.  libc needs them
and we just as well provide them as asm/elf.h as copying them into separate
libc headers.

ptrace.h: Having padding in the user_regs_struct isn't of any particular
value and just confuses GDB.  spr_defs isn't needed in userspace; libc
has its own copy anyway.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-05-08 11:43:30 +02:00
Kautuk Consul
4971f2bdb7 openrisc/mm/fault.c: Port OOM changes to do_page_fault
Commit d065bd810b
(mm: retry page fault when blocking on disk transfer) and
commit 37b23e0525
(x86,mm: make pagefault killable)

The above commits introduced changes into the x86 pagefault handler
for making the page fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial
during OOM killer invocation.

Port these changes to openrisc.

Signed-off-by: Mohd. Faris <mohdfarisq2010@gmail.com>
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-05-08 11:43:20 +02:00
Jonas Bonn
ad188f955a openrisc: remove unnecessary includes
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-05-08 11:43:00 +02:00
Jonas Bonn
b4c4c6ee93 openrisc: implement irqdomains
This moves OpenRISC to using the irqdomain infrastructure.  This doesn't
fundamentally change anything other than that it will be easier to have
multiple interrupt controllers in the future.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-05-08 11:42:55 +02:00
Márton Németh
d1ecad6eee x86/apic: Only compile local function if used with !CONFIG_GENERIC_PENDING_IRQ
The local function io_apic_level_ack_pending() is only called
from io_apic_level_ack_pending(). The later function is only
compiled if CONFIG_GENERIC_PENDING_IRQ is defined. Move the
io_apic_level_ack_pending() to the existing #ifdef
CONFIG_GENERIC_PENDING_IRQ code block.

This will remove the following warning message during compiling
without CONFIG_GENERIC_PENDING_IRQ defined:

 * arch/x86/kernel/apic/io_apic.c:382: warning: ‘io_apic_level_ack_pending’ defined but not used

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Link: http://lkml.kernel.org/r/1336461860.2296.3.camel@sbsiddha-mobl2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-08 11:23:15 +02:00
Suresh Siddha
c558df4a01 irq_remap: Fix the 'sub_handle' uninitialized warning
Fix this uninitialized variable warning:

  drivers/iommu/intel_irq_remapping.c:986:12: warning: ‘sub_handle’ may be used uninitialized in this function [-Wuninitialized]

GCC is wrong, help it out.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: joro@8bytes.org
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/r/1336460934-23592-3-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-08 11:17:30 +02:00
Suresh Siddha
82b481e80d irq_remap: Fix UP build failure
Fix the below UP build failure with CONFIG_IRQ_REMAP enabled.

 drivers/iommu/intel_irq_remapping.c:955:19: error: ‘struct irq_data’ has no member named ‘affinity’

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: joro@8bytes.org
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/r/1336460934-23592-2-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-08 11:17:30 +02:00
Suresh Siddha
399988eea1 irq_remap: Fix compiler warning with CONFIG_IRQ_REMAP=y
Fix the below compiler warning:

arch/x86/include/asm/irq_remapping.h:72:19: warning: ‘struct IO_APIC_route_entry’ declared inside parameter list [enabled by default]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: joro@8bytes.org
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/r/1336460934-23592-1-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-08 11:17:29 +02:00
Inki Dae
922f6e9936 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux into drm-next 2012-05-08 18:02:50 +09:00
R Sricharan
f6d5e079a0 ARM: OMAP2+: dma: Define dma capabilities register bitfields and use them.
The system dma module has capabiities register indicating
the support for descriptor loading, constant fill, etc.
Use this instead of OMAP revision check to identify the features
supported runtime.

This avoids patching the code for feature SOCs which has
those capabilities.

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08 11:54:24 +05:30
Santosh Shilimkar
7d6e11ef30 ARM: OMAP4: Reduce the static IO mapping
EMIF, GMPC and DMM driver can ioremap() the address
space as part of driver intialisation and there is
no need to have static IO mapping for them.

Hence remove the un-used static IP space and let
the respective drivers manage it as part if driver
init.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08 11:54:24 +05:30
Santosh Shilimkar
256aa5fc23 ARM: All OMAP2PLUS machines use omap2 directory so just add one entry
All OMAP2PLUS arch based machines makes use of mach-omap2 directory.
So just add one entry so that there is no need to patch this file
for any OMAP2+ devices.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08 11:54:24 +05:30
Santosh Shilimkar
d07c3df801 ARM: OMAP: dma: Make use of cpu_class_is_omap2() to avoid future patching.
cpu_class_is_omap2() contains all OMAP2+ devices. So update the DMA code
cpu checks accordingly so that there is no need to patch
the file for any future OMAP2+ devices.

In long run, all these attributes should come from hwmod dev_attr based
on DMA IP version.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08 11:54:24 +05:30
Santosh Shilimkar
084753d18e ARM: OMAP4: Remove un-used WakeupGen register defines.
Current OMAP code doesn't use any of the OMAP_WKG_ENB_SECURE_*
registers.

So remove those defines.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08 11:54:24 +05:30
Santosh Shilimkar
eb40155310 ARM: OMAP2+: Clean up wrapping multiple objects in Makefile
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-05-08 11:54:24 +05:30
Santosh Shilimkar
0ae28542a8 ARM: OMAP4: Don't compile cm2xxx_3xxx.c for OMAP4 only builds.
Since OMAP4 code base now makes use of OMAP4 specific PRCM functions,
cm2xxx_3xxx.c need not be compiled for OMAP4 only builds.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
2012-05-08 11:54:24 +05:30
Marco Aurelio da Costa
d8e725f356 ACPI: Ignore invalid _PSS entries, but use valid ones
The EliteBook 8560W has non-initialized entries in its _PSS ACPI
table. Instead of bailing out when the first non-initialized entry is
found, ignore it and use only  the valid entries. Only bail out if there
is no valid entry at all.

[v3: Fixes suggested by Konrad]

Signed-off-by: Marco Aurelio da Costa <costa@gamic.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-05-08 01:56:37 -04:00
Paul Walmsley
0135f6a046 Merge branches 'clock_am35xx_cleanup_3.5', 'prm_cm_devel_a_3.5', 'clock_devel_a_3.5' and 'pwrdm_clkdm_cleanup_3.5' into prcm_devel_a_3.5 2012-05-07 23:55:56 -06:00
Mark A. Greer
48a6884fd1 arm: omap3: clockdomain data: Remove superfluous commas from gfx_sgx_3xxx_wkdeps[]
Clean up clockdomains3xxx_data.c a bit by removing the superfluous
commas in gfx_sgx_3xxx_wkdeps[].

Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07 23:55:38 -06:00
Santosh Shilimkar
5a68a73658 ARM: OMAP2+: powerdomain: Get rid off duplicate pwrdm_clkdm_state_switch() API
With patch 'ARM: OMAP2+: powerdomain: Wait for powerdomain transition
in pwrdm_state_switch()', the pwrdm_clkdm_state_switch() API becomes
duplicate of pwrdm_state_switch().

Get rid off duplicate pwrdm_clkdm_state_switch() and update the
users of it with pwrdm_state_switch()

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07 23:55:38 -06:00
Paul Walmsley
8f97437eb5 ARM: OMAP3: clock data: add clockdomain for HDQ functional clock
Add the correct clockdomain for the HDQ functional clock.  This is needed
for the clock and hwmod PM code to work correctly.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: NeilBrown <neilb@suse.de>
2012-05-07 23:55:31 -06:00
Vaibhav Bedia
d76316fef3 ARM: OMAP3+: dpll: Configure autoidle mode only if it's supported
The current DPLL code enables and disables autoidle features
without checking whether the autoidle register is available.
Fix this by putting a check for the existence of the autoidle
register in the DPLL data.

With such a check in place, for DPLLs which do not support this
feature, simply skipping the autoidle_reg entry in the DPLL data
is sufficient.

Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07 23:55:30 -06:00
Tarun Kanti DebBarma
f1bbbb1365 ARM: OMAP2+: dmtimer: cleanup iclk usage
We do not use iclk anywhere in the dmtimer driver and so removing it.
Hence removing the timer iclk entries from OMAP4 clkdev table as well.

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07 23:55:30 -06:00
R Sricharan
610eb8c218 ARM: OMAP4+: Add prm and cm base init function.
Instead of statically defining seperate arrays for every OMAP4+ archs,
have a generic init function to populate the arrays. This avoids the
need for creating new array for every arch added in the future that
reuses the prm and cm registers read/write code.

Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07 23:55:22 -06:00
Vaibhav Hiremath
444b3df6b3 ARM: OMAP2/3: Add idle_st bits for ST_32KSYNC timer to prcm-common header
Add missing idle_st bit for 32k-sync timer into the prcm-common
header file, required for hwmod data.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07 23:55:21 -06:00
Rajendra Nayak
4e68f5a79d ARM: OMAP3: Fix CM register bit masks
The register bits for MPU_CLK_SRC and IVA2_CLK_SRC in CM_CLKSEL1_PLL
register are 3 bits wide.  Fix the MASK definition accordingly.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07 23:55:21 -06:00
Kevin Hilman
f0c54d31b0 ARM: OMAP: clock: convert AM3517/3505 detection/flags to AM35xx
To improve the clarity of the code, replace the CK_3517 flag used in
the clock data with CK_AM35XX.  The CK_3505 flag can also be
removed, since it is now unused.

Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07 23:55:11 -06:00
Kevin Hilman
c93a98c902 ARM: OMAP3: clock data: treat all AM35x devices the same
The init for 3505/3517 specific clocks depends on the ordering of
cpu_is checks, is error prone and confusing (there are 2 separate
checks for cpu_is_omap3505()).

Remove the 3505-specific checking since CK_3505 flag is not used, and
treat all AM35x clocks the same.

This means that the SGX clock (the only AM35x clkdev not currently
flagged for 3505) will now be registered on 3505, but that is
harmless.  That can be cleaned up when the clkdev nodes are removed in
favor of them being registered by hwmod.

Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07 23:55:10 -06:00
Kevin Hilman
875e6897e0 ARM: OMAP3: clock data: replace 3503/3517 flag with AM35x flag for UART4
The AM35x UART4 is common to all AM35x devices, so use CK_AM35XX instead
of (CK_3505 | CK_3517), which is equivalent.

Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-07 23:55:10 -06:00
Andy Whitcroft
c597145696 ACPI battery: only refresh the sysfs files when pertinent information changes
We only need to regenerate the sysfs files when the capacity units
change, avoid the update otherwise.

The origin of this issue is dates way back to 2.6.38:
da8aeb92d4
(ACPI / Battery: Update information on info notification and resume)

cc: <stable@vger.kernel.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Tested-by: Ralf Jung <post@ralfj.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-05-08 01:49:57 -04:00
Joonsoo Kim
de3ec03562 slub: fix incorrect return type of get_any_partial()
Commit 497b66f2ec ('slub: return object pointer
from get_partial() / new_slab().') changed return type of some functions.
This updates missing part.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-05-08 08:31:57 +03:00
Andre Schramm
42eb92380f ALSA: hdsp - Provide ioctl_compat
snd_hdsp uses its own ioctls to acquire config- and status information.
Expose the corresponding ioctl handler via ioctl_compat, so that 32bit applications can use it on 64bit kernels.

Signed-off-by: Andre Schramm <andre.schramm@iosono-sound.com>
Reviewed-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-08 07:27:22 +02:00
Steve Glendinning
97138a1ca7 smsc75xx: let EEPROM determine GPIO/LED settings
This patch allows the GPIO/LED settings to be configured by the
EEPROM if present, and only sets the default values (LED outputs
for link/activity) when an EEPROM is not detected.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 23:43:57 -04:00
Steve Glendinning
4f94a929e4 smsc75xx: eliminate unnecessary phy register read
Only a write is necessary to clear the interrupt status, and we
don't use the value from the preceding read operation.  This
patch eliminates the unnecessary read.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 23:43:56 -04:00
Steve Glendinning
7749622d7f smsc75xx: replace 0xffff with PHY_INT_SRC_CLEAR_ALL
This patch defines PHY_INT_SRC_CLEAR_ALL to replace the value 0xffff
in order to be more self-documenting.

This patch should make no functional change, it is purely cosmetic.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 23:43:56 -04:00
David S. Miller
0d6c4a2e46 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/intel/e1000e/param.c
	drivers/net/wireless/iwlwifi/iwl-agn-rx.c
	drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
	drivers/net/wireless/iwlwifi/iwl-trans.h

Resolved the iwlwifi conflict with mainline using 3-way diff posted
by John Linville and Stephen Rothwell.  In 'net' we added a bug
fix to make iwlwifi report a more accurate skb->truesize but this
conflicted with RX path changes that happened meanwhile in net-next.

In e1000e a conflict arose in the validation code for settings of
adapter->itr.  'net-next' had more sophisticated logic so that
logic was used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 23:35:40 -04:00
Steven King
83ca60094e m68knommu: enable qspi support when SPI_COLDFIRE_QSPI = m
Enable Coldfire QSPI support when SPI_COLDFIRE_QSPI is built as a module.

This version of the patch combines changes to the config files and  device.c
and uses IF_ENABLED (thanks to Sam Ravnborg for the suggestion).

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-08 13:06:51 +10:00
David S. Miller
6e06c0e234 Merge branch 'vhost-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Michael S. Tsirkin says:

--------------------
There are mostly bugfixes here.
I hope to merge some more patches by 3.5, in particular
vlan support fixes are waiting for Eric's ack,
and a version of tracepoint patch might be
ready in time, but let's merge what's ready so it's testable.

This includes a ton of zerocopy fixes by Jason -
good stuff but too intrusive for 3.4 and zerocopy is experimental
anyway.

virtio supported delayed interrupt for a while now
so adding support to the virtio tool made sense
--------------------

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 23:05:26 -04:00
Jiri Pirko
3a084ddb4b net: IP_MULTICAST_IF setsockopt now recognizes struct mreq
Until now, struct mreq has not been recognized and it was worked with
as with struct in_addr. That means imr_multiaddr was copied to
imr_address. So do recognize struct mreq here and copy that correctly.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 23:03:22 -04:00
David Daney
416912a129 netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines.
The GPIO pins select which sub bus is connected to the master.

Initially tested with an sn74cbtlv3253 switch device wired into the
MDIO bus.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 22:58:09 -04:00
David Daney
0ca2997d14 netdev/of/phy: Add MDIO bus multiplexer support.
This patch adds a somewhat generic framework for MDIO bus
multiplexers.  It is modeled on the I2C multiplexer.

The multiplexer is needed if there are multiple PHYs with the same
address connected to the same MDIO bus adepter, or if there is
insufficient electrical drive capability for all the connected PHY
devices.

Conceptually it could look something like this:

                   ------------------
                   | Control Signal |
                   --------+---------
                           |
 ---------------   --------+------
 | MDIO MASTER |---| Multiplexer |
 ---------------   --+-------+----
                     |       |
                     C       C
                     h       h
                     i       i
                     l       l
                     d       d
                     |       |
     ---------       A       B   ---------
     |       |       |       |   |       |
     | PHY@1 +-------+       +---+ PHY@1 |
     |       |       |       |   |       |
     ---------       |       |   ---------
     ---------       |       |   ---------
     |       |       |       |   |       |
     | PHY@2 +-------+       +---+ PHY@2 |
     |       |                   |       |
     ---------                   ---------

This framework configures the bus topology from device tree data.  The
mechanics of switching the multiplexer is left to device specific
drivers.

The follow-on patch contains a multiplexer driven by GPIO lines.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 22:58:09 -04:00
David Daney
2510602200 netdev/of/phy: New function: of_mdio_find_bus().
Add of_mdio_find_bus() which allows an mii_bus to be located given its
associated the device tree node.

This is needed by the follow-on patch to add a driver for MDIO bus
multiplexers.

The of_mdiobus_register() function is modified so that the device tree
node is recorded in the mii_bus.  Then we can find it again by
iterating over all mdio_bus_class devices.

Because the OF device tree has now become an integral part of the
kernel, this can live in mdio_bus.c (which contains the needed
mdio_bus_class structure) instead of of_mdio.c.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 22:58:09 -04:00
Tilman Schmidt
7dc2ce5f12 isdn/capi: elliminate capincci_find() in non-middleware case
If Kernel CAPI is compiled without CONFIG_ISDN_CAPI_MIDDLEWARE,
the structure retrieved via capincci_find() is never actually
used, so don't compile that function in that case.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 22:37:57 -04:00
Tilman Schmidt
7fdaadcc2e isdn/capi: fix readability damage
Fix up some of the readibility deterioration caused by the recent
whitespace coding style cleanup.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 22:37:57 -04:00
Tilman Schmidt
81fa7b8257 isdn/gigaset: unify function return values
Various functions in the Gigaset driver were using different
conventions for the meaning of their int return values.
Align them to the usual negative error numbers convention.

Inspired-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 22:37:56 -04:00
Tilman Schmidt
7643ffbd02 isdn/gigaset: internal function name cleanup
Functions clear_at_state and free_strings did the same thing;
drop one of them, keeping the more descriptive name.
Drop a redundant call.
Rename function dealloc_at_states to dealloc_temp_at_states
to clarify its purpose.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 22:37:56 -04:00
Tilman Schmidt
f86936ff38 isdn/gigaset: fix readability damage
Fix up some of the readibility deterioration caused by the recent
whitespace coding style cleanup.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07 22:37:56 -04:00