Commit graph

311,532 commits

Author SHA1 Message Date
Stephen Warren
6d5f89c7b4 USB: EHCI: remove PORT_RWC_BITS when clearing USB_PORT_FEAT_ENABLE
In the ClearPortFeature/USB_PORT_FEAT_ENABLE case, ehci_hub_control()
would read from status_reg, clear PORT_PE, and write the result back to
status_reg. This would clear any bits in PORT_RWC_BITS that were set in
the registers. Fix this by masking these bits off before the write.

Since this masking is common across all ClearPortFeature cases, move it
into a single early location to avoid duplicating it.

Remove the same bugfix from ehci-tegra.c's tegra_ehci_hub_control(), now
that this case is correctly handled by the core.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-19 19:06:23 -07:00
Tony Lindgren
1df82cd6d7 Add in most of the remaining hwmods (IP block descriptions) for the
OMAP44xx family of SoCs.  There still seem to be a few missing, such
 as those for the MMU IP blocks, but this seems to cover the bulk of
 the remainder.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPkHNvAAoJEMePsQ0LvSpLH5cQALFSa2wEDWpJP9UZzeOPYAfV
 BsyNSZCWkYenokaOFZ4UcGZZf8nk+RixVtHb4cEfiVLygbXoiH2uNCzogK56Avil
 TMAcnvXPv9/uL//GW/2Mwxzl5qUKK+v9d6yZLP0bzK+nPiw8ALJqcEIPKNunedB6
 Q7d2gIwrWAeHvHec+PINV4eR0ix9GTqEU2YxVwvPDhH3yQMMNWPhZLStGcgPSk5k
 UGf5zsVLrIgnzZYy7DFbKOoXhODi2QWJ8+11LWH7QZFPjjCutjaCk9kDdAFDxQqd
 t4HBs1MzloW0F/Mmc+DN/F2ETuEjXoK0Mugq0SYB3SPXZIQ8zdWqFR5o9vljoy8e
 wLhpaxwImZLIy5bLAz4dl4aBMUrKhTMHGXu6XItekiOW3DvnTYLowpaioct5CGst
 Eaw4AwPtaT2jMB3lcqWVFKjWuZhb2J6hbXBCrYmGI/qgz5Az+p5cXK014nKCuALo
 g4DG/WyZZJFUIWU378wgHurRiwnonWOTNFrtSOtQ84JqmbXYMyc/8J57wiZg0Ea4
 tRvUq4DHMFev9aCdpSZlBo47Y1Da8ZbWzGXv8r5ePnLaISWrVHmDv+WpTCQ+eO71
 m5xJQTLYhTa3/PLLH5K2Z7AfQWeJhXwEuudk5DCmkt0PpbatD3TnqaP6NzBtK3kQ
 uA4d6dh51PJuy1iBwZ1j
 =ToTm
 -----END PGP SIGNATURE-----

Merge tag 'omap-devel-a-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into devel-hwmod

Add in most of the remaining hwmods (IP block descriptions) for the
OMAP44xx family of SoCs.  There still seem to be a few missing, such
as those for the MMU IP blocks, but this seems to cover the bulk of
the remainder.
2012-04-19 17:45:33 -07:00
Tony Lindgren
9c3a3009f1 Clean up various aspects of the OMAP hwmod code, which is the IP block
control code for OMAP SoCs.  In particular, this series results in
 a considerable diffstat savings by changing the way that IP block
 interconnections are defined.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPkE3+AAoJEMePsQ0LvSpLzrMQAJV6ie5CZTu8FC+dIVplnn5q
 Tv12c1CUb1SRCxSYRFhxVDm+jL5d7sQ99C/HZ7kStz23OVn+r8OlyFmLTLk59Bkl
 tf8iBEcMyaB+oMvDddYyzcetjT3gpG0yOZC7FMYkfpwCd8DM2hk+8k4JawXe8cqu
 3HzDoeXynbF5QCgZpaORAZT8FH4tmTJl1XMkENIflmuwDV8QvwrKZmcJILnr2r+p
 pZhCt972xWV6PZYJ0HvdjgabbQ92jyIFggqNeA/BBNoMhfTXbhUFpZE2Oy/Y5vmu
 5qXR8yKFesV7jeXyiOMBzHLhMv9Rf4ivAE6u3aVmSIGrKvYTIPNEX9ric8Ryv1Um
 33y6NTLv4SsTeKqmL4gCFmbkTz9aixbonThr1yr9ZCHD7jXwjLUjkxyXyjTZRAOV
 BWWgMiTKxXmJ1o2AJ/Y3xEWkWsmeafSdKpEF9aPpLyX6bW5oYObAJ1KorvnUut6W
 YLWVP3JOfPFpcLHLFA/wtLbk+FwyKdbkLTyP29qJDvg3mUjJG0JGRaHA20hiZIOC
 zvxmq/Or7gMvDFXOY3EY97xnDLFbiM+efT/5KuTXI2sel2ojcL8uVJU6qvxGN86h
 5rz+E7RXpdtYafvtF0AKdX65Ntyqpe5EUUSnQJAB1xTC9CkFlVVn21R2PO+1P0+e
 xWjiHLK/+amqrZa+zkks
 =NqUz
 -----END PGP SIGNATURE-----

Merge tag 'omap-cleanup-b-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into cleanup-hwmod

Clean up various aspects of the OMAP hwmod code, which is the IP block
control code for OMAP SoCs.  In particular, this series results in
a considerable diffstat savings by changing the way that IP block
interconnections are defined.
2012-04-19 17:43:42 -07:00
Huang, Xiong
2528a5dc43 atl1c: remove MDIO_REG_ADDR_MASK in atl1c_mdio_read/write
MDIO_REG_ADDR_MASK is already applied in function
atl1c_write_phy_reg and atl1c_read_phy_reg

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:20 -04:00
Huang, Xiong
d163ff7b10 atl1c: fix WoL(magic) issue for l2cb 1.1
l2cb 1.1 hardware has a bug for magic wakeup,
the workaround is to add pattern enable.
WoL related registers are refined as well.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:20 -04:00
Huang, Xiong
ebe22ed960 atl1c: refine atl1c_pcie_patch
bit PCIE_PHYMISC_FORCE_RCV_DET is only for l1c&l2c to fix WoL issue,
other chips set bit5 of REG_MASTER_CTRL --- this way could save more
power than the former, and the bit should be kept all time.
l2cb 1.x has special setting for L0S/L1
l2cb 1.x & l1d 1.x should clear Vendor Message on some platforms,
otherwise it will cause the root complex hang.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:20 -04:00
Huang, Xiong
024e1e4dcd atl1c: refine/update ASPM configuration
some platforms(BIOS or OS) may change ASPM configuration in
PCI Express Link Control Register directly and dynamically
regardless the device driver installation.
Checking if ASPM support during the driver init phase by reading
PCI Express Link Contrl Register doesn't make sense.
This refine/update assume L0S/L1 is defalut enabled as hw->ctrl_flags
inited. atl1c_set_aspm will set real configuration based on chip
capability to hardware register.
atl1c_disable_l0s_l1 and register definition of REG_PM_CTRL are
refined as well.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:20 -04:00
Huang, Xiong
5cbdcc2f49 atl1c: clear bit MASTER_CTRL_CLK_SEL_DIS in atl1c_pcie_patch
bit MASTER_CTRL_CLK_SEL_DIS could be set before enter suspend
clear it after resume to enable pclk(PCIE clock) switch to
low frequency(25M) in some circumstances to save power.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:20 -04:00
Huang, Xiong
7f5544d669 atl1c: refine reg definition of REG_MASTER_CTRL
refine/update register REG_MASTER_CTRL definition according with
hardware spec.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:20 -04:00
Huang, Xiong
95f9aea769 atl1c: clear PCIE error status in atl1c_reset_pcie
clear PCIE error status (error log is write-1-clear).
REG_PCIE_UC_SEVERITY is removed as it's a standard pcie register,
and using kernle API to access it.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:20 -04:00
Huang, Xiong
9c277d848d atl1c: remove dmar_dly_cnt and dmaw_dly_cnt
dmar_dly_cnt and dmaw_dly_cnt aren't used by hardware/driver any more.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:19 -04:00
Huang, Xiong
c08b9b2a5b atl1c: update right threshold for TSO
atl1c_configure_tx used a wrong value of MAX_TX_OFFLOAD_THRESH(9KB)
for TSO threshold.
the right value should be 7KB
Fast Ethernet controller doesn't support Jumbo frame.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:19 -04:00
Huang, Xiong
969a7ee2a8 atl1c: add module parameter for l1c_wait_until_idle
l1c_wait_until_idle is called for serval modules (TXQ/RXQ/TXMAC/RXMAC).
specific moudle have specific idle/busy status in reg REG_IDLE_STATUS.
the previous code return wrongly if all modules are in idle status,
regardless the 'stop' action is applied on individual module.
Refine the reg REG_IDLE_STATUS definition as well.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:19 -04:00
Huang, Xiong
9c5282180b atl1c: threshold for ASPM is changed based on chip capability
threshold setting to control ASPM for diff chips are different.
currently, all gigabit-capability chips have limited-ASPM under
100M throughput.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:14:19 -04:00
Giuseppe CAVALLARO
31ea38eefe stmmac: do not fail when probe and there is no csr clk defined
On some platforms, for example where we are doing the bring-up,
the csr clock is not passed from the framework and the Ethernet
device driver is failing when it can work w/o any issues and
using the default values. So this patch just warnings the case
of the csr clock cannot be acquired but w/o failing the probe
step. I have just tested it on ST STiH415 SoC (ARM).

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:09:06 -04:00
Giuseppe CAVALLARO
0f1f88a875 stmmac: verify the dma_cfg platform fields
Recently the dma parameters that can be passed from the platform
have been moved from the plat_stmmacenet_data to the stmmac_dma_cfg.

In case of this new structure is not well allocated the driver can
fails. This is an example how this field is managed in ST platforms

static struct stmmac_dma_cfg gmac_dma_setting = {
        .pbl = 32,
};

static struct plat_stmmacenet_data stih415_ethernet_platform_data[] = {
	{
		.dma_cfg = &gmac_dma_setting,
		.has_gmac = 1,
[snip]

This patch so verifies that the dma_cfg passed from the platform.
In case of it is NULL there is no reason that the driver has to fail
and some default values can be passed. These are ok for all the
Synopsys chips and could impact on performances, only.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
cc: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:08:59 -04:00
Francesco Virlinzi
4bfcbd7abc stmmac: Move the mdio_register/_unregister in probe/remove
This patch moves the mdio_register/_unregister in probe/remove
functions and this also is required when hibernation on disk
is done.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st,com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st,com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:08:49 -04:00
Francesco Virlinzi
3256251f98 stmmac: use custom init/exit functions in pm ops
Freeze and restore can call the custom init/exit functions.
Also the patch adds a custom data field that can be used
for storing platform data useful on restore the embedded
setup (e.g. GPIO, SYSCFG).

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 20:08:44 -04:00
H. Peter Anvin
060feb6500 x86, doc: Revert "x86: Document rdmsr_safe restrictions"
This reverts commit ce37defc0f
"x86: Document rdmsr_safe restrictions", as these restrictions no longer apply.

Reported-by: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/r/20120419171609.GH3221@aftab.osrc.amd.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 17:07:34 -07:00
H. Peter Anvin
4c5023a3fa x86-32: Handle exception table entries during early boot
If we get an exception during early boot, walk the exception table to
see if we should intercept it.  The main use case for this is to allow
rdmsr_safe()/wrmsr_safe() during CPU initialization.

Since the exception table is currently sorted at runtime, and fairly
late in startup, this code walks the exception table linearly.  We
obviously don't need to worry about modules, however: none have been
loaded at this point.

This patch changes the early IDT setup to look a lot more like x86-64:
we now install handlers for all 32 exception vectors.  The output of
the early exception handler has changed somewhat as it directly
reflects the stack frame of the exception handler, and the stack frame
has been somewhat restructured.

Finally, centralize the code that can and should be run only once.

[ v2: Use early_fixup_exception() instead of linear search ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1334794610-5546-6-git-send-email-hpa@zytor.com
2012-04-19 16:45:02 -07:00
Avi Kivity
8281715b41 KVM: ia64: fix build due to typo
s/kcm/kvm/.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-19 20:35:43 -03:00
Avi Kivity
f78146b0f9 KVM: Fix page-crossing MMIO
MMIO that are split across a page boundary are currently broken - the
code does not expect to be aborted by the exit to userspace for the
first MMIO fragment.

This patch fixes the problem by generalizing the current code for handling
16-byte MMIOs to handle a number of "fragments", and changes the MMIO
code to create those fragments.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-19 20:35:07 -03:00
H. Peter Anvin
9900aa2f95 x86-64: Handle exception table entries during early boot
If we get an exception during early boot, walk the exception table to
see if we should intercept it.  The main use case for this is to allow
rdmsr_safe()/wrmsr_safe() during CPU initialization.

Since the exception table is currently sorted at runtime, and fairly
late in startup, this code walks the exception table linearly.  We
obviously don't need to worry about modules, however: none have been
loaded at this point.

[ v2: Use early_fixup_exception() instead of linear search ]

Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 15:42:45 -07:00
Rafal Prylowski
2b3c83efc9 dmaengine/ep93xx_dma: Implement double buffering for M2M DMA channels
Add double buffering support for M2M DMA channels. Implement this by using EP93xx
M2M DMA Buffer and Control Finite State Machines to be sure that we are not
disabling the channel when it's actually operating.

Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-04-20 08:37:19 +10:00
H. Peter Anvin
6a1ea279c2 x86, extable: Add early_fixup_exception()
Add a restricted version of fixup_exception() to be used during early
boot only.  In particular, this doesn't support the try..catch variant
since we may not have a thread_info set up yet.

This relies on the exception table being sorted already at build time.

Link: http://lkml.kernel.org/r/1334794610-5546-1-git-send-email-hpa@zytor.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 15:31:04 -07:00
Greg Kroah-Hartman
cae18768ac USB: serial: ipaq: remove product and vendor module parameters
This driver is for devices that are no longer being made, so the ability
to add new device ids when loading the module is not a feature that
anyone uses anymore.  So remove it, which simplifies the startup code a
lot, and saves space.

If you still need to dynamically load device ids, that can be done
through sysfs.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-19 15:17:46 -07:00
Greg Kroah-Hartman
0bf4da35b5 USB: serial: visor: remove product and vendor module parameters
This driver is for devices that are no longer being made, so the ability
to add new device ids when loading the module is not a feature that
anyone uses anymore.  So remove it, which simplifies the startup code a
lot, and saves space.

If you still need to dynamically load device ids, that can be done
through sysfs.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-19 15:16:59 -07:00
H. Peter Anvin
ffc4bc9c6f x86, paravirt: Replace GET_CR2_INTO_RCX with GET_CR2_INTO_RAX
GET_CR2_INTO_RCX is asinine: it is only used in one place, the actual
paravirt call returns the value in %rax, not %rcx; and the one place
that wants it wants the result in %r9.  We actually generate as a
result of this call:

       call ...
       movq %rax, %rcx
       xorq %rax, %rax		/* this value isn't even used... */
       movq %rcx, %r9

At least make the macro do what the paravirt call does, which is put
the value into %rax.

Nevermind the fact that the macro clobbers all the volatile registers.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1334794610-5546-4-git-send-email-hpa@zytor.com
Cc: Glauber de Oliveira Costa <glommer@parallels.com>
2012-04-19 15:07:56 -07:00
H. Peter Anvin
84f4fc524e x86: Add symbolic constant for exceptions with error code
Add a symbolic constant for the bitmask which states which exceptions
carry an error code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1334794610-5546-3-git-send-email-hpa@zytor.com
2012-04-19 15:07:49 -07:00
H. Peter Anvin
46326013e3 x86, nop: Make the ASM_NOP* macros work from assembly
Make the ASM_NOP* macros work in actual assembly files.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1334794610-5546-2-git-send-email-hpa@zytor.com
2012-04-19 15:07:42 -07:00
David Daney
d405c60128 x86: Select BUILDTIME_EXTABLE_SORT
We can sort the exeception table at build time for x86, so let's do
it.

Signed-off-by: David Daney <david.daney@cavium.com>
Link: http://lkml.kernel.org/r/1334872799-14589-6-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 15:07:10 -07:00
David Daney
4b0544955a MIPS: Select BUILDTIME_EXTABLE_SORT
We can sort the exeception table at build time for MIPS, so let's do
it.

Signed-off-by: David Daney <david.daney@cavium.com>
Link: http://lkml.kernel.org/r/1334872799-14589-5-git-send-email-ddaney.cavm@gmail.com
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 15:06:56 -07:00
David Daney
1dbdc6f177 kbuild/extable: Hook up sortextable into the build system.
Define a config variable BUILDTIME_EXTABLE_SORT to control build time
sorting of the kernel's exception table.

Patch Makefile to do the sorting when BUILDTIME_EXTABLE_SORT is
selected.

Signed-off-by: David Daney <david.daney@cavium.com>
Link: http://lkml.kernel.org/r/1334872799-14589-4-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 15:06:56 -07:00
David Daney
d219e2e86a extable: Skip sorting if sorted at build time.
If the build program sortextable has already sorted the exception
table, don't sort it again.

Signed-off-by: David Daney <david.daney@cavium.com>
Link: http://lkml.kernel.org/r/1334872799-14589-3-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 15:06:55 -07:00
David Daney
a79f248b9b scripts: Add sortextable to sort the kernel's exception table.
Using this build-time sort saves time booting as we don't have to burn
cycles sorting the exception table.

Signed-off-by: David Daney <david.daney@cavium.com>
Link: http://lkml.kernel.org/r/1334872799-14589-2-git-send-email-ddaney.cavm@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-04-19 15:06:55 -07:00
Linus Torvalds
c6f5c93098 Merge branch 'for-3.4' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from J. Bruce Fields:
 "One bugfix, and one minor header fix from Jeff Layton while we're
  here"

* 'for-3.4' of git://linux-nfs.org/~bfields/linux:
  nfsd: include cld.h in the headers_install target
  nfsd: don't fail unchecked creates of non-special files
2012-04-19 14:54:52 -07:00
Steven Rostedt
db4c75cbeb tracing: Fix stacktrace of latency tracers (irqsoff and friends)
While debugging a latency with someone on IRC (mirage335) on #linux-rt (OFTC),
we discovered that the stacktrace output of the latency tracers
(preemptirqsoff) was empty.

This bug was caused by the creation of the dynamic length stack trace
again (like commit 12b5da3 "tracing: Fix ent_size in trace output" was).

This bug is caused by the latency tracers requiring the next event
to determine the time between the current event and the next. But by
grabbing the next event, the iter->ent_size is set to the next event
instead of the current one. As the stacktrace event is the last event,
this makes the ent_size zero and causes nothing to be printed for
the stack trace. The dynamic stacktrace uses the ent_size to determine
how much of the stack can be printed. The ent_size of zero means
no stack.

The simple fix is to save the iter->ent_size before finding the next event.

Note, mirage335 asked to remain anonymous from LKML and git, so I will
not add the Reported-by and Tested-by tags, even though he did report
the issue and tested the fix.

Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-04-19 17:00:13 -04:00
David Spinadel
a104104fd7 iwlwifi: Remove inconsistent and redundant declaration
Remove declaration of iwl_alloc_traffic_mem from iwl-agn.h,
from methods that was exposed to support MVM.

MVM doesn't have to use this declaration.

CC: netdev@vger.kernel.org
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19 16:55:14 -04:00
Guennadi Liakhovetski
b72d667709 [media] V4L: fix a compiler warning
Fix the warning:

In file included from /home/lyakh/software/project/24/src/linux-2.6/drivers/media/video/v4l2-subdev.c:29:
linux-2.6/include/media/v4l2-ctrls.h:497: warning: 'struct file' declared inside parameter list
linux-2.6/include/media/v4l2-ctrls.h:497: warning: its scope is only this definition or declaration, which is probably not what you want
linux-2.6/include/media/v4l2-ctrls.h:505: warning: 'struct file' declared inside parameter list

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 17:25:53 -03:00
Hans Verkuil
f70cfc7f18 [media] vivi: fix duplicate line
This was inadvertently introduced when the integer menu control was added.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 17:24:53 -03:00
Hans Verkuil
ca57681195 [media] v4l2-ctrls.c: zero min/max/step/def values for 64 bit integers
Those fields are meaningless for such control types, and the control framework
should zero them. Otherwise v4l2-compliance will complain about non-zero
min/max/step/def fields.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 17:24:19 -03:00
Hans Verkuil
d1c754a932 [media] V4L2: drivers implementing vidioc_default should also return -ENOTTY
If the vidioc_default implementation doesn't support the ioctl, then drivers
must return -ENOTTY instead of -EINVAL.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 17:23:55 -03:00
Hans Verkuil
ee71e7b3ae [media] V4L: fix incorrect refcounting
Both radio-keene and dsbr100 did one v4l2_device_get too many. Thus the refcount
never became 0 and that causes a memory leak.

Also updated the V4L2 framework documentation accordingly.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 17:23:38 -03:00
Dan Carpenter
aa6d5f2953 [media] pluto2: remove some dead code
buf[] is a 4 character array.  Perhaps this was some debugging code from
back in the day?

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-19 17:15:32 -03:00
Arnaldo Carvalho de Melo
3f862fd076 perf annotate: Add missing jump variants
Taken from binutils:

[acme@sandy binutils-2.22]$ grep ^j opcodes/i386-opc.tbl | cut -d, -f1 | sort -u

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mwshob8n12jlsu458ghvheos@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 17:10:12 -03:00
Mingkai Hu
4351f30a35 powerpc/mpc85xx: add MPIC message dts node
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-04-19 15:10:08 -05:00
Arnaldo Carvalho de Melo
cf2dacc560 perf annotate browser: Use a vertical line as percentage separator
Where we had ':'.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-l8gbejzpglnwiwk43450h31g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 17:08:31 -03:00
Arnaldo Carvalho de Melo
8bf39cb81b perf annotate browser: Make lines more compact
But now we have a lot of space on the right...

Perhaps we should add a "Trending on G+" gizmo... ;-)

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-igoynvtg2wc6mdfinc69prp6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-19 17:08:24 -03:00
Marcelo Tosatti
eac0556750 Merge branch 'linus' into queue
Merge reason: development work has dependency on kvm patches merged
upstream.

Conflicts:
	Documentation/feature-removal-schedule.txt

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-19 17:06:26 -03:00
Mingkai Hu
dea58bd1ca powerpc/mpic_msgr: fix offset error when setting mer register
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-04-19 14:55:56 -05:00