Commit graph

311,532 commits

Author SHA1 Message Date
Bing Zhao
428ca8a706 mwifiex: update pcie8766 scratch register addresses
The scratch register addresses have been changed for newer chips.
Since the old chip was never shipped and it will not be supported
any more, just update register addresses to support the new chips.

Cc: <stable@vger.kernel.org> # 3.2.y, 3.3.y
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13 14:06:59 -04:00
Felix Fietkau
75600abf19 ath9k: wake up the hardware from full sleep when idle is turned off
The hardware needs a reset to recover from full sleep. Issue this reset
directly in the ath9k_config call that turns off idle, otherwise tx
remains dead until the first channel change after the idle state change

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13 14:06:59 -04:00
Jonathan Bither
2db0d2ba97 ath5k: unmap io memory on probe failure
Signed-off-by: Jonathan Bither <jonbither@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13 14:05:36 -04:00
Jonathan Bither
32b92f4f3f ath5k: fix undefined 'THIS_MODULE'
When cross compiling ath5k for a Mips machine with kernel 3.2.14
the compilation fails with "/ath5k/ahb.c:231:12: error: 'THIS_MODULE' undeclared here (not in a function)"
Fix the build by including <linux/export.h>

Signed-off-by: Jonathan Bither <jonbither@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13 14:05:35 -04:00
Lukasz Kucharczyk
e55a4046da cfg80211: fix interface combinations check.
Signed-off-by: Lukasz Kucharczyk <lukasz.kucharczyk@tieto.com>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13 14:05:35 -04:00
Arend van Spriel
badc4f0762 brcm80211: smac: resume transmit fifo upon receiving frames
There have been reports about not being able to use access-points
on channel 12 and 13 or having connectivity issues when these channels
were part of the selected regulatory domain. Upon switching to these
channels the brcmsmac driver suspends the transmit dma fifos. This
patch resumes them upon handing over the first received beacon to
mac80211.

This patch is to be applied to the stable tree for kernel versions
3.2 and 3.3.

Cc: stable@vger.kernel.org
Tested-by: Francesco Saverio Schiavarelli <fschiava@libero.it>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13 14:05:35 -04:00
Amitkumar Karwar
effcc625eb libertas: fix signedness bug in lbs_auth_to_authtype()
Return type for lbs_auth_to_authtype() is changed from "u8" to
"int" to return negative error code correctly.
Also an error check is added in connect handler for invalid auth
type.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13 14:05:35 -04:00
Matt Renzelmann
51c61a2838 ks8851: Fix missing mutex_lock/unlock
Move the ks8851_rdreg16 call above the call to request_irq and cache
the result for subsequent repeated use.  A spurious interrupt may
otherwise cause a crash.  Thanks to Stephen Boyd, Flavio Leitner, and
Ben Hutchings for feedback.

Signed-off-by: Matt Renzelmann <mjr@cs.wisc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 14:04:47 -04:00
Rémi Denis-Courmont
2a06b40fbb Phonet: change maintainer address
nokia.com MX does not cope well with kernel.org.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 14:03:16 -04:00
Rémi Denis-Courmont
8e052e5289 Phonet: missing headers (sparse)
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 14:03:16 -04:00
Rémi Denis-Courmont
3c490a87f6 Phonet: phonet_net_id can be static (sparse)
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 14:03:16 -04:00
Hiroaki SHIMODA
dcd2ba92e8 neighbour: Make neigh_table_init_no_netlink() static.
neigh_table_init_no_netlink() is only used in net/core/neighbour.c file.

Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 14:00:44 -04:00
Jonathan Cameron
344692b1ed staging:iio: chan_spec - take extend_name constant.
I can't envision a case where this is not constant and we
don't seem to have any in tree, so lets clear up this loose
end.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13 10:59:38 -07:00
Jonathan Cameron
ef97d42173 staging:iio:iio_core.h make less dependent on other included headers
There are a lot of pointers to structures used in here that are not
declared unless a particular header is included first.  Deal with
the IIO specific ones by putting in forward declarations and the
other ones by including kernel.h and device.h.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13 10:59:38 -07:00
Jonathan Cameron
a7322fc2fa staging:iio:Documentation: Fix a cut and paste error.
falling is repeated in some entries instead of 1x falling and 1x rising
for the entry.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13 10:59:38 -07:00
Jonathan Cameron
fe3f8f87ed staging:iio:light:tsl2563 channel spec buglet / always reading same adc.
The IIO_LIGHT channel was not marked as being a processed_val despite
clearly being in lux.

The IIO_INTENSITY channel reads were dependent on channel and that isn't
specified for either adc (as they now use modifiers).  Hence use the
modifier instead.

Reported-by: Jon Brenner <jbrenner@taosinc.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13 10:59:38 -07:00
Michal Simek
59a54f3082 drivers/net/ethernet/xilinx/axi ethernet: Correct Copyright
Also fix MAINTAINERS file to reflect autorship.

Daniel and Ariane changed coding style but not any functional changes in the driver
itself.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:58:42 -04:00
Jiri Slaby
91ceae374e NET: pc300, move to staging as it is broken
It was marked as BROKEN back in 2008. It is because the tty handling
in the driver is really broken.

There was some activity in January 2012 to fix the driver, but the
patch was commented to be bogus:
  https://lkml.org/lkml/2012/1/29/160
and we have not heard back from the author since then:
  https://lkml.org/lkml/2012/3/28/412

So since nobody stepped in and rewrote the driver, it is time to move
it out of line now. And drop it some time later if nobody comes up
with patches to fix the driver in staging.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrea Shepard <andrea@persephoneslair.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13 10:57:04 -07:00
Jiri Slaby
86b26007a3 TTY: con3215, use tty from tty_port
Obtain tty_struct only once in ISR and pass it down to
raw3215_next_io. Other than that, we just use the tty with raised
reference. And set it properly in open and close.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13 10:56:12 -07:00
Jiri Slaby
8dd360f042 TTY: con3215, add tty_port
And use flags from that. But first we have to get rid of duplicated
flag names. From now on, for the standard ones that are stored in
tty_port->flags, we use ASYNC_* ones.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13 10:56:12 -07:00
Jiri Slaby
a2f892060f TTY: hvc, fix TTY refcounting
A -next commit "TTY: HVC, use tty from tty_port" switched the driver
to use tty_port helper for tty refcounting. But it omitted to remove
manual tty refcounting from open, close and hangup. So now we are
getting random crashes caused by use-after-free:
Unable to handle kernel paging request for data at address 0xc0000003f9d550
Faulting instruction address: 0xc0000000001b7f40
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP: c0000000001b7f40 LR: c0000000001b7f14 CTR: c0000000000e04f0
...
NIP [c0000000001b7f40] .__kmalloc+0x70/0x230
LR [c0000000001b7f14] .__kmalloc+0x44/0x230
Call Trace:
[c0000003f68bf930] [c0000003f68bf9b0] 0xc0000003f68bf9b0 (unreliable)
[c0000003f68bf9e0] [c0000000001e5424] .alloc_fdmem+0x24/0x70
[c0000003f68bfa60] [c0000000001e54f8] .alloc_fdtable+0x88/0x130
[c0000003f68bfaf0] [c0000000001e5924] .dup_fd+0x384/0x450
[c0000003f68bfbd0] [c00000000009a310] .copy_process+0x880/0x11d0
[c0000003f68bfcd0] [c00000000009aee0] .do_fork+0x70/0x400
[c0000003f68bfdc0] [c0000000000141c4] .sys_clone+0x54/0x70
[c0000003f68bfe30] [c000000000009aa0] .ppc_clone+0x8/0xc

Fix that by complete removal of tty_kref_get/put in open/close/hangup
paths.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-and-tested-by: Michael Neuling <mikey@neuling.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: ppc-dev <linuxppc-dev@lists.ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13 10:54:43 -07:00
Al Viro
e847469bf7 lockd: fix the endianness bug
comparing be32 values for < is not doing the right thing...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-13 13:50:52 -04:00
Jason Wang
a8c9cb106f 8139cp: set intr mask after its handler is registered
We set intr mask before its handler is registered, this does not work well when
8139cp is sharing irq line with other devices. As the irq could be enabled by
the device before 8139cp's hander is registered which may lead unhandled
irq. Fix this by introducing an helper cp_irq_enable() and call it after
request_irq().

Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:41:52 -04:00
Eric Dumazet
447167bf56 udp: intoduce udp_encap_needed static_key
Most machines dont use UDP encapsulation (L2TP)

Adds a static_key so that udp_queue_rcv_skb() doesnt have to perform a
test if L2TP never setup the encap_rcv on a socket.

Idea of this patch came after Simon Horman proposal to add a hook on TCP
as well.

If static_key is not yet enabled, the fast path does a single JMP .

When static_key is enabled, JMP destination is patched to reach the real
encap_type/encap_rcv logic, possibly adding cache misses.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: dev@openvswitch.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:39:37 -04:00
Tony Zelenoff
03662e41c7 atl1: fix kernel panic in case of DMA errors
Problem:
There was two separate work_struct structures which share one
handler. Unfortunately getting atl1_adapter structure from
work_struct in case of DMA error was done from incorrect
offset which cause kernel panics.

Solution:
The useless work_struct for DMA error removed and
handler name changed to more generic one.

Signed-off-by: Tony Zelenoff <antonz@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:34:20 -04:00
Mike Sinkovsky
77577bf932 net: WIZnet drivers: fix possible NULL dereference
This fixes possible null dereference in probe() function: when both
.mac_addr and .link_gpio are unknown, dev.platform_data may be NULL

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mike Sinkovsky <msink@permonline.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:34:12 -04:00
stephen hemminger
9b17876f3e rtnetlink: fix comments
Fix spelling and references in rtnetlink.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:32:39 -04:00
stephen hemminger
efacb309b5 rtnetlink & bonding: change args got get_tx_queues
Change get_tx_queues, drop unsused arg/return value real_tx_queues,
and use return by value (with error) rather than call by reference.

Probably bonding should just change to LLTX and the whole get_tx_queues
API could disappear!

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:31:00 -04:00
Stephen Warren
d19e779b84 ASoC: tegra: select REGMAP_MMIO
All Tegra ASoC drivers will be reworked to use MMIO regmaps. Select
this in Kconfig.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 18:30:24 +01:00
David Brown
af33eadc73 ARM: msm: Fix section mismatches in proc_comm.c
The change
    commit 4416e9eb0b
    Author: Gregory Bean <gbean@codeaurora.org>
    Date:   Wed Jul 28 10:22:12 2010 -0700

        arm: msm: Fix section mismatch in smd.c.

fixes a section mismatch between the board file and the smd driver's
probe function, however, it misses the additional mismatches between
the probe function and some routines it calls.  Fix these up as well.

Signed-off-by: David Brown <davidb@codeaurora.org>
2012-04-13 10:23:17 -07:00
David Brown
e89c0e4377 video: msm: Fix section mismatches in mddi.c
The change
    commit 461cbe77d0
    Author: Gregory Bean <gbean@codeaurora.org>
    Date:   Wed Jul 28 10:22:13 2010 -0700

        video: msm: Fix section mismatch in mddi.c.

fixes a section mismatch between the board file and the driver's probe
function, however, it misses the additional mismatches between the
probe function and some routines it calls.  Fix these up as well.

Signed-off-by: David Brown <davidb@codeaurora.org>
2012-04-13 10:23:17 -07:00
Daniel Walker
204241c27c arm: msm: trout: fix compile failure
Fixes the following warnings,

arch/arm/mach-msm/board-trout.c: In function 'trout_init':
arch/arm/mach-msm/board-trout.c:71: error: 'system_rev' undeclared (first use in this function)
arch/arm/mach-msm/board-trout.c:71: error: (Each undeclared identifier is reported only once
arch/arm/mach-msm/board-trout.c:71: error: for each function it appears in.)

and

arch/arm/mach-msm/board-trout-panel.c: In function 'trout_init_panel':
arch/arm/mach-msm/board-trout-panel.c:267: error: 'system_rev' undeclared (first use in this function)
arch/arm/mach-msm/board-trout-panel.c:267: error: (Each undeclared identifier is reported only once
arch/arm/mach-msm/board-trout-panel.c:267: error: for each function it appears in.)

This came in with the following commit 9f97da78bf
which removes asm/system.h

Signed-off-by: Daniel Walker <dwalker@fifo99.com>
cc: David Howells <dhowells@redhat.com>
cc: Bryan Huntsman <bryanh@codeaurora.org>
cc: linux-arm-msm@vger.kernel.org
cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: David Brown <davidb@codeaurora.org>
2012-04-13 10:23:16 -07:00
Daniel Walker
1c07ae43bb arm: msm: halibut: remove unneeded fixup
This old fixup causes a build failure, so I remove it just like in
trout.

Signed-off-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: David Brown <davidb@codeaurora.org>
2012-04-13 10:23:16 -07:00
Chris Metcalf
ef1f098254 irq_work: fix compile failure on tile from missing include
Building with IRQ_WORK configured results in

kernel/irq_work.c: In function ‘irq_work_run’:
kernel/irq_work.c:110: error: implicit declaration of function ‘irqs_disabled’

The appropriate header just needs to be included.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-13 13:15:16 -04:00
Paul Gortmaker
85f8f7759e ia64: populate the cmpxchg header with appropriate code
commit 93f378883c

    "Fix ia64 build errors (fallout from system.h disintegration)"

introduced arch/ia64/include/asm/cmpxchg.h as a temporary
build fix and stated:

    "... leave the migration of xchg() and cmpxchg() to this new
     header file for a future patch."

Migrate the appropriate chunks from asm/intrinsics.h and fix
the whitespace issues in the migrated chunk.

Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-13 13:15:16 -04:00
Paul Gortmaker
5ba840f9da alpha: fix build failures from system.h dismemberment
commit ec2212088c

    "Disintegrate asm/system.h for Alpha"

combined with commit b4816afa39

    "Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h"

introduced the concept of asm/cmpxchg.h but the alpha arch
never got one.  Fork the cmpxchg content out of the asm/atomic.h
file to create one.

Some minor whitespace fixups were done on the block of code that
created the new file.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-13 13:15:16 -04:00
Jim Cromie
302846e3a6 ethernet: replace open-coded ARRAY_SIZE with macro
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:15:14 -04:00
Jim Cromie
4133099b3e enic: replace open-coded ARRAY_SIZE with macro
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:15:14 -04:00
Jim Cromie
0db83cd85c broadcom: replace open-coded ARRAY_SIZE with macro
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:15:14 -04:00
Lars-Peter Clausen
60dfc629f8 net: Remove redundant spi driver bus initialization
In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register() so
we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
	.driver = {
-		.bus = &spi_bus_type,
	},
};
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Frederic Lambert <frdrc66@gmail.com>
Cc: netdev@vger.kernel.org
Acked-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:13:38 -04:00
David Ward
6f66cdc3e5 net/garp: fix GID rbtree ordering
The comparison operators were backwards in both garp_attr_lookup and
garp_attr_create, so the entire GID rbtree was in reverse order.
(There was no practical side effect to this though, except that PDUs
were sent with attributes listed in reverse order, which is still
valid by the protocol. This change is only for clarity.)

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:10:33 -04:00
Michael S. Tsirkin
ca8f4fb21d skbuff: struct ubuf_info callback type safety
The skb struct ubuf_info callback gets passed struct ubuf_info
itself, not the arg value as the field name and the function signature
seem to imply. Rename the arg field to ctx to match usage,
add documentation and change the callback argument type
to make usage clear and to have compiler check correctness.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:09:19 -04:00
David Woodhouse
9a5d2bd99e ppp: Fix race condition with queue start/stop
Commit e675f0cc9a ("ppp: Don't stop and
restart queue on every TX packet") introduced a race condition which
could leave the net queue stopped even when the channel is no longer
busy. By calling netif_stop_queue() from ppp_start_xmit(), based on the
return value from ppp_xmit_process() but *after* all the locks have been
dropped, we could potentially do so *after* the channel has actually
finished transmitting and attempted to re-wake the queue.

Fix this by moving the netif_stop_queue() into ppp_xmit_process() under
the xmit lock. I hadn't done this previously, because it gets called
from other places than ppp_start_xmit(). But I now think it's the better
option. The net queue *should* be stopped if the channel becomes
congested due to writes from pppd, anyway.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:06:47 -04:00
David Woodhouse
9d02daf754 pppoatm: Fix excessive queue bloat
We discovered that PPPoATM has an excessively deep transmit queue. A
queue the size of the default socket send buffer (wmem_default) is
maintained between the PPP generic core and the ATM device.

Fix it to queue a maximum of *two* packets. The one the ATM device is
currently working on, and one more for the ATM driver to process
immediately in its TX done interrupt handler. The PPP core is designed
to feed packets to the channel with minimal latency, so that really
ought to be enough to keep the ATM device busy.

While we're at it, fix the fact that we were triggering the wakeup
tasklet on *every* pppoatm_pop() call. The comment saying "this is
inefficient, but doing it right is too hard" turns out to be overly
pessimistic... I think :)

On machines like the Traverse Geos, with a slow Geode CPU and two
high-speed ADSL2+ interfaces, there were reports of extremely high CPU
usage which could partly be attributed to the extra wakeups.

(The wakeup handling could actually be made a whole lot easier if we
 stop checking sk->sk_sndbuf altogether. Given that we now only queue
 *two* packets ever, one wonders what the point is. As it is, you could
 already deadlock the thing by setting the sk_sndbuf to a value lower
 than the MTU of the device, and it'd just block for ever.)

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 13:03:45 -04:00
Gao feng
1716a96101 ipv6: fix problem with expired dst cache
If the ipv6 dst cache which copy from the dst generated by ICMPV6 RA packet.
this dst cache will not check expire because it has no RTF_EXPIRES flag.
So this dst cache will always be used until the dst gc run.

Change the struct dst_entry,add a union contains new pointer from and expires.
When rt6_info.rt6i_flags has no RTF_EXPIRES flag,the dst.expires has no use.
we can use this field to point to where the dst cache copy from.
The dst.from is only used in IPV6.

rt6_check_expired check if rt6_info.dst.from is expired.

ip6_rt_copy only set dst.from when the ort has flag RTF_ADDRCONF
and RTF_DEFAULT.then hold the ort.

ip6_dst_destroy release the ort.

Add some functions to operate the RTF_EXPIRES flag and expires(from) together.
and change the code to use these new adding functions.

Changes from v5:
modify ip6_route_add and ndisc_router_discovery to use new adding functions.

Only set dst.from when the ort has flag RTF_ADDRCONF
and RTF_DEFAULT.then hold the ort.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 12:58:29 -04:00
Al Viro
72094e43e3 ocfs2: ->e_leaf_clusters endianness breakage
le16, not le32...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-13 12:31:43 -04:00
Al Viro
28748b325d ocfs2: ->rl_count endianness breakage
le16, not le32...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-13 12:31:41 -04:00
Al Viro
e1bf4cc620 ocfs: ->rl_used breakage on big-endian
it's le16, not le32 or le64...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-13 12:31:38 -04:00
Al Viro
3a251f04fe ocfs2: ->l_next_free_req breakage on big-endian
It's le16, not le32...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-13 12:31:37 -04:00
Grant Likely
d57a4282d0 spi/devicetree: Move devicetree support code into spi directory
The SPI device tree support code isn't shared by any other subsystem.  It can
be moved into the core drivers/spi directory and the exported symbol can be
removed.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
2012-04-13 10:21:39 -06:00