Commit graph

311,532 commits

Author SHA1 Message Date
Daniel Vetter
fb3256da8d drm/i915: split up ring->dispatch_execbuffer functions
Now that we can, we should split them up in a way that makes some
sense and banishes the IS_ checks into init code.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:52:02 +02:00
Daniel Vetter
0fd2c20148 drm/i915: don't enable the gen6 bsd ring tail write enable on gen7
HW engineers have fixed this issue for ivb. Again, a nice cleanup
possible thanks to the more flexible ring initialization.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:51:49 +02:00
Daniel Vetter
e48d86347c drm/i915: split out the gen5 ring irq get/put functions
Now that we have sensibly split up, we can nicely get rid of that ugly
is_gen5 check.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:51:37 +02:00
Daniel Vetter
e367031966 drm/i915: abstract away ring-specific irq_get/put
Inspired by Ben Widawsky's patch for gen6+. Now after restructuring
how we set up the ring vtables and parameters, we can do this right.

This kills the bsd specific get/put_irq functions, they're now the
same.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:51:07 +02:00
Daniel Vetter
686cb5f9f5 drm/i915: consolidate ring->sync-to functions
The waiter is always the ring itself (otherwise we'd have a decent
snafu in a callsite), so we can unify this easily.

Also give it the usual gen6_ prefix, in case anyone is foolish enough to
implement hw semaphores for gen5.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:50:41 +02:00
Daniel Vetter
b4178f8aaf drm/i915: don't set up rings on gen6+ for non-kms
It's not supported, and with the patch to refuse loading on gen6+
without kms enabled, there's also no way we can hit this.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:42:35 +02:00
Daniel Vetter
3535d9dd5a drm/i915: dynamically set up blt ring functions and parameters
Just for consistency.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:42:30 +02:00
Daniel Vetter
58fa383587 drm/i915: dynamically set up bsd ring functions and params
The same treatment for the bsd ring. Again, this will be split up
further by the irq rework.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:42:25 +02:00
Takashi Iwai
85f71932e5 ALSA: usb: Fix fill_max flag set
ep->fill_max is a 1 bit flag, thus it has to be boolean.
  sound/usb/endpoint.c: In function 'snd_usb_endpoint_set_params':
  sound/usb/endpoint.c:785: warning: overflow in implicit constant conversion

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 12:41:54 +02:00
Daniel Vetter
59465b5f78 drm/i915: dynamically set up the render ring functions and params
Our hw is simply not well-designed enough that it neatly fits into
boxes. Everywhere else we set up vtables and similar things
dynamically using switch statements - it's simply much more flexible.

This is prep work to rework the pre-gen6 ring irq stuff - it'll add a
few more differences. With the current const struct templates, that
would be a mess.

This leads to some unfortunate duplication with the old dri1 code, but
we can reap that again because gen6 isn't actually supported there.
But that's for a separate patch.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:41:36 +02:00
Daniel Vetter
dfc9ef2fb0 drm/i915: set ring->size in common ring setup code
Eventually we want to scale the ring size depending upon available
gtt space. For now just consolidate this instead of replicating it
over all ringbuffer templates.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:41:22 +02:00
Daniel Vetter
6a848ccb80 drm/i915: rip out ring->irq_mask
We only ever enable/disable one interrupt (namely user_interrupts and
pipe_notify), so we don't need to track the interrupt masking state.

Also rename irq_enable to irq_enable_mask, now that it won't collide -
beforehand both a irq_mask and irq_enable_mask would have looked a bit
strange.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-13 12:40:57 +02:00
Kuninori Morimoto
cd04461e2f ASoC: sh: fsi: select simple-card on Kconfig
Current SuperH FSI require simple-card driver as sound card.
This patch select it on Kconfig when FSI was selected.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:28 +01:00
Kuninori Morimoto
064bfada66 ASoC: sh: fsi: use simple-card instead of fsi-da7210
This patch uses simple-card driver instead of fsi-da7210 on each board.
To select DA7210 driver, each boards select it on Kconfig.

This patch removes fsi-da7210 driver which is no longer needed

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:27 +01:00
Kuninori Morimoto
fa063b4804 ASoC: sh: fsi: use simple-card instead of fsi-hdmi
This patch uses simple-card driver instead of fsi-hdmi on each board.
This patch removes fsi-hdmi driver which is no longer needed

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:26 +01:00
Kuninori Morimoto
af8a2fe12f ASoC: sh: fsi: use simple-card instead of fsi-ak4642
This patch uses simple-card driver instead of fsi-ak4642 on each board.
To select AK4642 driver, each boards select it on Kconfig.

This patch removes fsi-ak4642 driver which is no longer needed

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:26 +01:00
Kuninori Morimoto
f2390880ec ASoC: add generic simple-card support
Current ASoC requires card.c file to each platforms in order to
specifies its CPU and Codecs pair.
But the differences between these were only value/strings of setting.
In order to reduce duplicate driver, this patch adds generic/simple-card.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:25 +01:00
Stephen Warren
cdc04fd1e9 ASoC: tegra: add Kconfig and Makefile support for Tegra30
This adds Kconfig options for the Tegra30 AHUB and I2S controller, and
updates the Tegra+WM8903 machine driver Kconfig to select those.

Includes a squashed bugfix from Sumit Bhattacharya <sumitb@nvidia.com>

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:23 +01:00
Stephen Warren
4fb0384f3d ASoC: tegra: add tegra30-i2s driver
This provides an ASoC DAI interface for Tegra 30's I2S controller.

Includes a squashed bugfix from Sumit Bhattacharya <sumitb@nvidia.com>

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:23 +01:00
Stephen Warren
be944d42cc ASoC: tegra: add tegra30-ahub driver
The AHUB (Audio Hub) is a mux/crossbar which links all audio-related
devices except the HDA controller on Tegra30. The devices include the
DMA FIFOs, DAM (Digital Audio Mixers), I2S controllers, and SPDIF
controller. Audio data may be routed between these devices in various
combinations as required by board design/application.

Includes a squashed bugfix from Nikesh Oswal <noswal@nvidia.com>
Includes squashed bugfixes from Sumit Bhattacharya <sumitb@nvidia.com>

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:22 +01:00
Stephen Warren
a21361b9b9 regmap: fix compile errors in regmap-irq.c due to stride changes
Commit f01ee60fff ("regmap: implement register striding") caused the
compile errors below. Fix them.

drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_sync_unlock':
drivers/base/regmap/regmap-irq.c:62:12: error: 'map' undeclared (first use in this function)
drivers/base/regmap/regmap-irq.c:62:12: note: each undeclared identifier is reported only once for each function it appears in
drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_enable':
drivers/base/regmap/regmap-irq.c:77:37: error: 'map' undeclared (first use in this function)
drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_disable':
drivers/base/regmap/regmap-irq.c:85:37: error: 'map' undeclared (first use in this function)

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:22 +01:00
Stephen Warren
edc9ae420f regmap: implement register striding
regmap_config.reg_stride is introduced. All extant register addresses
are a multiple of this value. Users of serial-oriented regmap busses will
typically set this to 1. Users of the MMIO regmap bus will typically set
this based on the value size of their registers, in bytes, so 4 for a
32-bit register.

Throughout the regmap code, actual register addresses are used. Wherever
the register address is used to index some array of values, the address
is divided by the stride to determine the index, or vice-versa. Error-
checking is added to all entry-points for register address data to ensure
that register addresses actually satisfy the specified stride. The MMIO
bus ensures that the specified stride is large enough for the register
size.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:21 +01:00
Stephen Warren
6a8d2511e1 regmap: fix compilation when !CONFIG_DEBUG_FS
Commit 79c64d5 "regmap: allow regmap instances to be named" changed the
prototype of regmap_debugfs_init, but didn't update the dummy inline used
when !CONFIG_DEBUGFS. Fix this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:20 +01:00
Stephen Warren
4b5c0186e4 regmap: allow regmap instances to be named
Some devices have multiple separate register regions. Logically, one
regmap would be created per region. One issue that prevents this is that
each instance will attempt to create the same debugfs files. Avoid this
by allowing regmaps to be named, and use the name to construct the
debugfs directory name.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:19 +01:00
Stephen Warren
2690dfdb05 regmap: validate regmap_raw_read/write val_len
val_len should be a multiple of val_bytes. If it's not, error out early.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:19 +01:00
Stephen Warren
8664d4901f regmap: mmio: remove some error checks now in the core
These error checks are implemented in regmap core. Remove the duplicate
code from regmap-mmio.c

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:18 +01:00
Stephen Warren
ae5d8af579 regmap: mmio: convert some error returns to BUG()
Some of the error conditions detected by regmap_mmio_*() are pure internal
errors, rather than user-/client-triggerable conditions. Convert these to
BUG().

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:17 +01:00
Stephen Warren
ecb44aec86 regmap: add MMIO bus support
This is a basic memory-mapped-IO bus for regmap. It has the following
features and limitations:

* Registers themselves may be 8, 16, 32, or 64-bit. 64-bit is only
  supported on 64-bit platforms.
* Register offsets are limited to precisely 32-bit.
* IO is performed using readl/writel, with no provision for using the
  __raw_readl or readl_relaxed variants.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:16 +01:00
Stephen Warren
a42678c4c8 regmap: introduce fast_io busses, and use a spinlock for them
Some bus types have very fast IO. For these, acquiring a mutex for every
IO operation is a significant overhead. Allow busses to indicate their IO
is fast, and enhance regmap to use a spinlock for those busses.

[Currently limited to native endian registers -- broonie]

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:16 +01:00
Stephen Warren
26b5e74d31 regmap: introduce explicit bus_context for bus callbacks
The only context needed by I2C and SPI bus definitions is the device
itself; this can be converted to an i2c_client or spi_device in order
to perform IO on the device. However, other bus types may need more
context in order to perform IO. Enable this by having regmap_init accept
a bus_context parameter, and pass this to all bus callbacks. The
existing callbacks simply pass the struct device here. Future bus types
may pass something else.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:15 +01:00
Marc Reilly
55c1371c79 regmap: Use pad_bits and reg_bits when determining register format.
This change combines any padding bits into the register address bits when
determining register format handlers to use the next byte-divisible
register size.
A reg_shift member is introduced to the regmap struct to enable fixup
of the reg format.
Format handlers now take an extra parameter specifying the number of
bits to shift the value by.

Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:14 +01:00
Marc Reilly
89a89b5e4f regmap: Add support for device with 24 data bits.
Add support for devices with 24 data bits.

Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 11:29:13 +01:00
AceLan Kao
87522a433b Bluetooth: Add support for Atheros [13d3:3362]
Add another vendor specific ID for Atheros AR3012 device.
This chip is wrapped by IMC Networks.

output of usb-devices:
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3362 Rev=00.02
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-04-13 12:59:56 +03:00
Andreas Herrmann
283c1f2558 x86, microcode: Ensure that module is only loaded on supported AMD CPUs
Exit early when there's no support for a particular CPU family. Also,
fixup the "no support for this CPU vendor" to be issued only when the
driver is attempted to be loaded on an unsupported vendor.

Cc: stable@vger.kernel.org
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20120411163849.GE4794@alberich.amd.com
[Boris: add a commit msg because Andreas is lazy]
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-04-13 11:51:05 +02:00
Andreas Herrmann
a956bd6f85 x86, microcode: Fix sysfs warning during module unload on unsupported CPUs
Loading the microcode driver on an unsupported CPU and subsequently
unloading the driver causes

 WARNING: at fs/sysfs/group.c:138 mc_device_remove+0x5f/0x70 [microcode]()
 Hardware name: 01972NG
 sysfs group ffffffffa00013d0 not found for kobject 'cpu0'
 Modules linked in: snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel btusb snd_hda_codec bluetooth thinkpad_acpi rfkill microcode(-) [last unloaded: cfg80211]
 Pid: 4560, comm: modprobe Not tainted 3.4.0-rc2-00002-g258f742 #5
 Call Trace:
  [<ffffffff8103113b>] ? warn_slowpath_common+0x7b/0xc0
  [<ffffffff81031235>] ? warn_slowpath_fmt+0x45/0x50
  [<ffffffff81120e74>] ? sysfs_remove_group+0x34/0x120
  [<ffffffffa00000ef>] ? mc_device_remove+0x5f/0x70 [microcode]
  [<ffffffff81331eb9>] ? subsys_interface_unregister+0x69/0xa0
  [<ffffffff81563526>] ? mutex_lock+0x16/0x40
  [<ffffffffa0000c3e>] ? microcode_exit+0x50/0x92 [microcode]
  [<ffffffff8107051d>] ? sys_delete_module+0x16d/0x260
  [<ffffffff810a0065>] ? wait_iff_congested+0x45/0x110
  [<ffffffff815656af>] ? page_fault+0x1f/0x30
  [<ffffffff81565ba2>] ? system_call_fastpath+0x16/0x1b

on recent kernels.

This is due to commit 8a25a2fd12 ("cpu: convert 'cpu' and
'machinecheck' sysdev_class to a regular subsystem") which renders
commit 6c53cbfced ("x86, microcode: Correct sysdev_add error path")
useless.

See http://marc.info/?l=linux-kernel&m=133416246406478

Avoid above warning by restoring the old driver behaviour before
6c53cbfced ("x86, microcode: Correct sysdev_add error path").

Cc: stable@vger.kernel.org
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20120411163849.GE4794@alberich.amd.com
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-04-13 11:49:06 +02:00
Manoj Iyer
79cd760220 Bluetooth: btusb: Add vendor specific ID (0489 e042) for BCM20702A0
T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e042 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=E4D53DCA61B5
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Reported-by: Dennis Chua <dennis.chua@canonical.com>
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-04-13 12:21:38 +03:00
Jesper Juhl
86fc499823 ASoC: cs42l73: don't use negative array index
If cs42l73_get_mclkx_coeff() returns < 0 (which it can) in
sound/soc/codecs/cs42l73.c::cs42l73_set_mclk(), then we'll be using
the (negative) return value as array index on the very next line of
code - that's bad.

Catch the negative return value and propagate it to the caller (which
checks for it) and things are a bit more sane :-)

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 10:01:38 +01:00
Axel Lin
4d26f7d581 regulator: max8660: Use devm_kzalloc()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 09:59:39 +01:00
Axel Lin
b7bd05b8d5 regulator: max1586: Use devm_kzalloc()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 09:59:39 +01:00
Axel Lin
ef6bd5a3f1 regulator: isl6271a-regulator: Use devm_kzalloc()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 09:59:39 +01:00
Axel Lin
276909d359 regulator: Convert max8998 to set_voltage_time_sel
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 09:54:45 +01:00
Axel Lin
7b4354b465 regulator: Convert max8998 to get_voltage_sel
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 09:54:45 +01:00
Axel Lin
b6f476c2c1 regulator: twl-regulator: Use twlreg_grp helper function
Since the twlreg_grp helper function is there, use it.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 09:54:45 +01:00
Axel Lin
48c936d6da regulator: twl-regulator: Implement enable_time callback
Let regulator core do the necessary delay for us.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 09:54:45 +01:00
Axel Lin
127ef6274a regulator: Update regulator_register() API signature in Documentation
commit c172708 "regulator: core: Use a struct to pass in regulator runtime
configuration" changed the regulator_register() API signature.

Update the Documentation accordingly to reflect the change in the function
signature.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13 09:54:45 +01:00
Takashi Iwai
c5ee4ec828 ALSA: usb: Remove unused variable
sound/usb/endpoint.c: In function ‘deactivate_urbs’:
sound/usb/endpoint.c:520:16: warning: unused variable ‘flags’ [-Wunused-variable]

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 10:27:28 +02:00
Daniel Mack
94c27215bc ALSA: snd-usb: add some documentation
Document the new streaming code and some of the functions so that
contributers can catch up easier.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 10:25:24 +02:00
Daniel Mack
c75a8a7ae5 ALSA: snd-usb: add support for implicit feedback
Implicit feedback is a streaming mode that does not rely on dedicated
sync endpoints but uses the information provided by record streams to
clock output streams. Now that the streaming logic is decoupled from the
PCM streams, this is easy to implement.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 10:24:32 +02:00
Daniel Mack
d399ff9593 ALSA: snd-usb: remove old streaming logic
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 10:24:23 +02:00
Daniel Mack
edcd3633e7 ALSA: snd-usb: switch over to new endpoint streaming logic
With the previous commit that added the new streaming model, all
endpoint and streaming related code is now in endpoint.c, and pcm.c
only acts as a wrapper for handling the packet's payload.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 10:24:08 +02:00