Commit graph

797,141 commits

Author SHA1 Message Date
Jakub Kicinski
44b6fed0c1 nfp: bpf: double check vNIC capabilities after object sharing
Program translation stage checks that program can be offloaded to
the netdev which was passed during the load (bpf_attr->prog_ifindex).
After program sharing was introduced, however, the netdev on which
program is loaded can theoretically be different, and therefore
we should recheck the program size and max stack size at load time.

This was found by code inspection, AFAIK today all vNICs have
identical caps.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-16 15:23:58 -07:00
Jakub Kicinski
527db74b71 nfp: bpf: protect against mis-initializing atomic counters
Atomic operations on the NFP are currently always in big endian.
The driver keeps track of regions of memory storing atomic values
and byte swaps them accordingly.  There are corner cases where
the map values may be initialized before the driver knows they
are used as atomic counters.  This can happen either when the
datapath is performing the update and the stack contents are
unknown or when map is updated before the program which will
use it for atomic values is loaded.

To avoid situation where user initializes the value to 0 1 2 3
and then after loading a program which uses the word as an atomic
counter starts reading 3 2 1 0 - only allow atomic counters to be
initialized to endian-neutral values.

For updates from the datapath the stack information may not be
as precise, so just allow initializing such values to 0.

Example code which would break:
struct bpf_map_def SEC("maps") rxcnt = {
       .type = BPF_MAP_TYPE_HASH,
       .key_size = sizeof(__u32),
       .value_size = sizeof(__u64),
       .max_entries = 1,
};

int xdp_prog1()
{
      	__u64 nonzeroval = 3;
	__u32 key = 0;
	__u64 *value;

	value = bpf_map_lookup_elem(&rxcnt, &key);
	if (!value)
		bpf_map_update_elem(&rxcnt, &key, &nonzeroval, BPF_ANY);
	else
		__sync_fetch_and_add(value, 1);

	return XDP_PASS;
}

$ offload bpftool map dump
key: 00 00 00 00 value: 00 00 00 03 00 00 00 00

should be:

$ offload bpftool map dump
key: 00 00 00 00 value: 03 00 00 00 00 00 00 00

Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-16 15:23:58 -07:00
Nathan Chancellor
6498cbc57f scsi: bfa: Remove unused functions
Clang warns when a variable is assigned to itself.

drivers/scsi/bfa/bfa_fcbuild.c:199:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
        len = len;
        ~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:838:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
        len = len;
        ~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:917:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
        len = len;
        ~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:981:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
        len = len;
        ~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:1008:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
        len = len;
        ~~~ ^ ~~~
5 warnings generated.

This construct is usually used to avoid unused variable warnings, which
I assume is the case here. -Wunused-parameter is hidden behind -Wextra
with GCC 4.6, which is the minimum version to compile the kernel as of
commit cafa0010cd ("Raise the minimum required gcc version to 4.6").

However, upon further inspection, these functions aren't actually used
anywhere; they're just defined. Rather than just removing the self
assignments, remove all of this dead code.

Link: https://github.com/ClangBuiltLinux/linux/issues/148
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 18:21:01 -04:00
Paul Cercueil
226dfa4726 clk: Add Ingenic jz4725b CGU driver
Add support for the clocks provided by the CGU in the Ingenic JZ4725B
SoC.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 15:19:48 -07:00
Nathan Chancellor
3e59790e07 scsi: qla2xxx: Remove unnecessary self assignment
Clang warns when a variable is assigned to itself.

drivers/scsi/qla2xxx/qla_mbx.c:1514:4: warning: explicitly assigning
value of variable of type 'uint64_t' (aka 'unsigned long long') to
itself [-Wself-assign]
        l = l;
        ~ ^ ~
1 warning generated.

This construct is usually used to avoid unused variable warnings, which
I assume is the case here. -Wunused-parameter is hidden behind -Wextra
with GCC 4.6, which is the minimum version to compile the kernel as of
commit cafa0010cd ("Raise the minimum required gcc version to 4.6").
Just remove this line to silence Clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/83
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 18:19:46 -04:00
Paul Cercueil
2fdecde775 dt-bindings: clock: Add jz4725b-cgu.h header
This will be used from the devicetree bindings to specify the clocks
that should be obtained from the jz4725b-cgu driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 15:19:43 -07:00
Paul Cercueil
067b6dedeb dt-bindings: clock: ingenic: Explicitly list compatible strings
This is better than letting the other developers wondering what are the
supported strings.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 15:19:22 -07:00
Paul Cercueil
0880fb8660 clk: ingenic: Add proper Kconfig entries
Previously, the CGU code corresponding to the SoC for which we're
compiling the kernel was the only one enabled, which made it impossible
to build one kernel that supports them all.

Now, it is possible to select more than one SoC to support.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 15:19:15 -07:00
Andrey Ignatov
ab9e084821 libbpf: Per-symbol visibility for DSO
Make global symbols in libbpf DSO hidden by default with
-fvisibility=hidden and export symbols that are part of ABI explicitly
with __attribute__((visibility("default"))).

This is common practice that should prevent from accidentally exporting
a symbol, that is not supposed to be a part of ABI what, in turn,
improves both libbpf developer- and user-experiences. See [1] for more
details.

Export control becomes more important since more and more projects use
libbpf.

The patch doesn't export a bunch of netlink related functions since as
agreed in [2] they'll be reworked. That doesn't break bpftool since
bpftool links libbpf statically.

[1] https://www.akkadia.org/drepper/dsohowto.pdf (2.2 Export Control)
[2] https://www.mail-archive.com/netdev@vger.kernel.org/msg251434.html

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-16 15:16:47 -07:00
YueHaibing
242b4a39be scsi: arcmsr: Remove set but not used variables 'id, lun'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/arcmsr/arcmsr_hba.c: In function 'arcmsr_drain_donequeue':
drivers/scsi/arcmsr/arcmsr_hba.c:1320:10: warning:
 variable 'lun' set but not used [-Wunused-but-set-variable]

drivers/scsi/arcmsr/arcmsr_hba.c:1320:6: warning:
 variable 'id' set but not used [-Wunused-but-set-variable]

Never used since introduction in commit ae52e7f09f ("arcmsr: Support 1024 scatter-gather list entries and improve AP while FW trapped and behaviors of EHs").

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 18:13:59 -04:00
Shefali Jain
652f1813c1 clk: qcom: gcc: Add global clock controller driver for QCS404
Add the clocks supported in global clock controller which clock the
peripherals like BLSPs, SDCC, USB, MDSS etc. Register all the clocks
to the clock framework for the clients to be able to request for them.

Signed-off-by: Shefali Jain <shefjain@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Co-developed-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
[bamse, vkoul: rebase and tidyup for upstream]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
[sboyd@kernel.org: Lowercase hex]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 15:13:54 -07:00
Bjorn Andersson
a3d152e40e clk: qcom: Export clk_alpha_pll_configure()
This is used by the QCS404 GCC driver, export it to allow that driver to
be compiled as a module..

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 15:09:20 -07:00
Taniya Das
f2a76a2955 clk: qcom: Add Global Clock controller (GCC) driver for SDM660
Add support for the global clock controller found on SDM660
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.
Based on CAF implementation.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
[craig: rename parents to fit upstream, and other cleanups]
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
[sboyd@kernel.org: Rename gcc_660 to gcc_sdm660 and fix numbering of
defines to avoid duplicates]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 15:06:43 -07:00
Wenwen Wang
47db787313 scsi: megaraid_sas: fix a missing-check bug
In megasas_mgmt_compat_ioctl_fw(), to handle the structure
compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket
'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle
the packet. Since the two data structures have different fields, the data
is copied from 'cioc' to 'ioc' field by field. In the copy process,
'sense_ptr' is prepared if the field 'sense_len' is not null, because it
will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the
user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and
saved to kernel-space variables 'local_sense_off' and 'user_sense_off'
respectively. Given that 'ioc->sense_off' is also copied from
'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the
same value. However, 'cioc' is in the user space and a malicious user can
race to change the value of 'cioc->sense_off' after it is copied to
'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing
so, the attacker can inject different values into 'local_sense_off' and
'user_sense_off'. This can cause undefined behavior in the following
execution, because the two variables are supposed to be same.

This patch enforces a check on the two kernel variables 'local_sense_off'
and 'user_sense_off' to make sure they are the same after the copy. In
case they are not, an error code EINVAL will be returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 17:55:20 -04:00
Colin Ian King
fd13f0517d scsi: be2iscsi: fix spelling mistake "Retreiving" -> "Retrieving"
Trivial fix to spelling mistake in beiscsi_log message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 17:52:41 -04:00
Colin Ian King
c4dba187e6 scsi: lpfc: fix spelling mistake "Resrouce" -> "Resource"
Trivial fix to spelling mistake in lpfc_printf_log message text.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 17:51:47 -04:00
John Garry
fe5fb42de3 scsi: hisi_sas: Fix spin lock management in slot_index_alloc_quirk_v2_hw()
Currently a spin_unlock_irqrestore() call is missing on the error path,
so add it.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 17:50:49 -04:00
Jens Axboe
abaf75dd61 scsi: sg: remove bad blk_end_request_all() call
We just need to free the request here. Additionally, this is currently
wrong for a queue that's using MQ currently, it'll crash.

Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 17:49:57 -04:00
Ronald Wahl
0f5cb0e622 clk: at91: Fix division by zero in PLL recalc_rate()
Commit a982e45dc1 ("clk: at91: PLL recalc_rate() now using cached MUL
and DIV values") removed a check that prevents a division by zero. This
now causes a stacktrace when booting the kernel on a at91 platform if
the PLL DIV register contains zero. This commit reintroduces this check.

Fixes: a982e45dc1 ("clk: at91: PLL recalc_rate() now using cached...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ronald Wahl <rwahl@gmx.de>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:49:39 -07:00
Jens Axboe
8d849275dc scsi: osd: initiator should use mq variant of request ending
This is currently wrong since it isn't dependent on if we're using mq or
not. At least now it'll be correct when we force mq.

Cc: linux-scsi@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 17:48:35 -04:00
Manivannan Sadhasivam
c1a3308a06 clk: hisilicon: Add clock driver for Hi3670 SoC
Add clock driver for HiSilicon Hi3670 SoC utilizing HiSilicon's
common clk code.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:47:16 -07:00
Manivannan Sadhasivam
3b6b13ede0 dt-bindings: clk: hisilicon: Add bindings for Hi3670 clk
Add devicetree bindings for HiSilicon Hi3670 clock controller.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:46:56 -07:00
Krzysztof Kozlowski
8985167ecf clk: s2mps11: Fix matching when built as module and DT node contains compatible
When driver is built as module and DT node contains clocks compatible
(e.g. "samsung,s2mps11-clk"), the module will not be autoloaded because
module aliases won't match.

The modalias from uevent: of:NclocksT<NULL>Csamsung,s2mps11-clk
The modalias from driver: platform:s2mps11-clk

The devices are instantiated by parent's MFD.  However both Device Tree
bindings and parent define the compatible for clocks devices.  In case
of module matching this DT compatible will be used.

The issue will not happen if this is a built-in (no need for module
matching) or when clocks DT node does not contain compatible (not
correct from bindings perspective but working for driver).

Note when backporting to stable kernels: adjust the list of device ID
entries.

Cc: <stable@vger.kernel.org>
Fixes: 53c31b3437 ("mfd: sec-core: Add of_compatible strings for clock MFD cells")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:45:14 -07:00
Gustavo A. R. Silva
5d25ff7a54 scsi: ips: fix missing break in switch
Add missing break statement in order to prevent the code from falling
through to case TEST_UNIT_READY.

Addresses-Coverity-ID: 1357338 ("Missing break in switch")
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 17:44:38 -04:00
Manivannan Sadhasivam
5ddf0cdf93 clk: actions: Add Actions Semi S900 SoC Reset Management Unit support
Add Reset Management Unit (RMU) support for Actions Semi S900 SoC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:41:53 -07:00
Manivannan Sadhasivam
c4dd4a2eb6 clk: actions: Add Actions Semi S700 SoC Reset Management Unit support
Add Reset Management Unit (RMU) support for Actions Semi S700 SoC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:41:47 -07:00
Manivannan Sadhasivam
09dbde0154 clk: actions: Add Actions Semi Owl SoCs Reset Management Unit support
Add Reset Management Unit (RMU) support for Actions Semi Owl SoCs.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:41:39 -07:00
Manivannan Sadhasivam
a35bcf7c7f dt-bindings: reset: Add binding constants for Actions Semi S900 RMU
Add device tree binding constants for Actions Semi S900 SoC Reset
Management Unit (RMU).

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:41:15 -07:00
Manivannan Sadhasivam
73a5e67efa dt-bindings: reset: Add binding constants for Actions Semi S700 RMU
Add device tree binding constants for Actions Semi S700 SoC Reset
Management Unit (RMU).

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:41:01 -07:00
Manivannan Sadhasivam
46b5dfab75 dt-bindings: clock: Add reset controller bindings for Actions Semi Owl SoCs
Add Reset Controller bindings to clock bindings for Actions Semi Owl
SoCs, S700 and S900.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:40:58 -07:00
Manivannan Sadhasivam
3a23eb725b clk: actions: Cache regmap info in private clock descriptor
In order to support the reset controller, regmap info needs to
be cached in the private clock descriptor, owl_clk_desc. Hence,
save that and also make the clock descriptor struct non const.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:40:54 -07:00
Dan Carpenter
d344b21bf4 drm/amd/amdgpu: Fix debugfs error handling
The error handling is wrong and "ent" could be NULL we when dereference
it to get "ent->d_inode".

The thing is that normally debugfs_create_file() is not supposed to
require (or have) any error handling.  That function does return error
pointers if debugfs is turned off but we know it's enable here.  When
it's enabled, then it returns NULL on error.

So what I did was I stripped out all the error handling except around
the i_size_write().  I could have just used a NULL check instead of an
IS_ERR_OR_NULL() but I figured this was more clear because that way you
don't have to look at the surrounding code to see whether debugfs is
enabled or not.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-16 15:10:34 -05:00
Feifei Xu
c55045adf7 drm/amdgpu: Update gc_9_0 golden settings.
Add mmDB_DEBUG3 settings.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-10-16 15:09:53 -05:00
Evan Quan
e26f70a653 drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
Update the PPtable structure to fit the latest SMC firmware.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-16 15:09:10 -05:00
Evan Quan
d579fd8270 drm/amd/powerplay: added I2C controller configuration
PPTABLE structure is stretched to add I2C controller
configuration. Hold on the PPTABLE_V20_SMU_VERSION bump
until the VBIOS is ready.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-16 15:08:54 -05:00
Evan Quan
dd46e5f0f7 drm/amdgpu: update Vega20 SDMA golden setting
Update SDMA golden settings.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-16 15:08:40 -05:00
Rex Zhu
3df2764539 drm/amdgpu: Fix typo in amdgpu_vmid_mgr_init
fix a typo in for loop: i->j

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-10-16 15:08:08 -05:00
Daniel Borkmann
aadd435591 tcp, ulp: remove socket lock assertion on ULP cleanup
Eric reported that syzkaller triggered a splat in tcp_cleanup_ulp()
where assertion sock_owned_by_me() failed. This happened through
inet_csk_prepare_forced_close() first releasing the socket lock,
then calling into tcp_done(newsk) which is called after the
inet_csk_prepare_forced_close() and therefore without the socket
lock held. The sock_owned_by_me() assertion can generally be
removed as the only place where tcp_cleanup_ulp() is called from
now is out of inet_csk_destroy_sock() -> sk->sk_prot->destroy()
where socket is in dead state and unreachable. Therefore, add a
comment why the check is not needed instead.

Fixes: 8b9088f806 ("tcp, ulp: enforce sock_owned_by_me upon ulp init and cleanup")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16 12:38:41 -07:00
Yonatan Cohen
94a04d1d3d net/mlx5: Expose DC scatter to CQE capability bit
dc_req_scat_data_cqe capability bit determines
if requester scatter to cqe is available for 64 bytes CQE over
DC transport type.

Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-10-16 21:55:29 +03:00
Leon Romanovsky
551d315e34 RDMA/umad: Use kernel API to allocate umad indexes
Replace custom code to allocate indexes to generic kernel API.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16 14:36:21 -04:00
Leon Romanovsky
90f6e41cc0 RDMA/uverbs: Use kernel API to allocate uverbs indexes
Replace custom code to allocate indexes to generic kernel API.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16 14:36:21 -04:00
Leon Romanovsky
7d65cbf0b0 RDMA/core: Increase total number of RDMA ports across all devices
IDA adds overhead to store IDs bitmap with maximal value of IDA
can be upto 2099202 (IDA_MAX = 0x80000000U / IDA_BITMAP_BITS - 1).

However, there is no need to add such enormous number of devices
and it is enough for now to limit it to be 8192.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16 14:36:20 -04:00
Igor Stoppa
bab5d98884 dm: remove unnecessary unlikely() around WARN_ON_ONCE()
WARN_ON() already contains an unlikely(), so it's not necessary to
wrap it into another.

Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-16 14:34:59 -04:00
Florian Fainelli
4585add948
MAINTAINERS: Add entry for Broadcom SPI controller
Add an entry for the Broadcom SPI controller in the MAINTAINERS file.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-16 19:33:24 +01:00
John Pittman
092b564876 dm zoned: target: use refcount_t for dm zoned reference counters
The API surrounding refcount_t should be used in place of atomic_t
when variables are being used as reference counters.  This API can
prevent issues such as counter overflows and use-after-free
conditions.  Within the dm zoned target stack, the atomic_t API is
used for bioctx->ref and cw->refcount.  Change these to use
refcount_t, avoiding the issues mentioned.

Signed-off-by: John Pittman <jpittman@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-16 14:27:38 -04:00
John Pittman
22d4c291f5 dm thin: use refcount_t for thin_c reference counting
The API surrounding refcount_t should be used in place of atomic_t
when variables are being used as reference counters.  It can
potentially prevent reference counter overflows and use-after-free
conditions.  In the dm thin layer, one such example is tc->refcount.
Change this from the atomic_t API to the refcount_t API to prevent
mentioned conditions.

Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-16 14:27:03 -04:00
Håkon Bugge
b4c542df5a IB/mlx4: Add port and TID to MAD debug print
Add said information and make the debug print format consistent.

Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16 14:23:33 -04:00
Håkon Bugge
0a094ff061 IB/mlx4: Enable debug print of SMPs
IB Subnet Management Packets (SMPs) were excluded from debug prints.

Fixed by enabling print even on QP0 MADs.

Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16 14:23:33 -04:00
Parav Pandit
1ae4cfa039 RDMA/core: Rename ports_parent to ports_kobj
Normally kobj objects have kobj suffix to reflect it.
Rename ports_parent to ports_kobj.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16 14:09:45 -04:00
Parav Pandit
0f6ef65d1c RDMA/core: Do not expose unsupported counters
If the provider driver (such as rdma_rxe) doesn't support pma counters,
avoid exposing its directory similar to optional hw_counters directory.
If core fails to read the PMA counter, return an error so that user can
retry later if needed.

Fixes: 35c4cbb178 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16 14:09:44 -04:00