Commit graph

1,294,499 commits

Author SHA1 Message Date
Hugo Villeneuve
9915753037 serial: sc16is7xx: fix unconditional activation of THRI interrupt
Commit cc4c1d05eb ("sc16is7xx: Properly resume TX after stop") changed
behavior to unconditionnaly set the THRI interrupt in sc16is7xx_tx_proc().

For example when sending a 65 bytes message, and assuming the Tx FIFO is
initially empty, sc16is7xx_handle_tx() will write the first 64 bytes of the
message to the FIFO and sc16is7xx_tx_proc() will then activate THRI. When
the THRI IRQ is fired, the driver will write the remaining byte of the
message to the FIFO, and disable THRI by calling sc16is7xx_stop_tx().

When sending a 2 bytes message, sc16is7xx_handle_tx() will write the 2
bytes of the message to the FIFO and call sc16is7xx_stop_tx(), disabling
THRI. After sc16is7xx_handle_tx() exits, control returns to
sc16is7xx_tx_proc() which will unconditionally set THRI. When the THRI IRQ
is fired, the driver simply acknowledges the interrupt and does nothing
more, since all the data has already been written to the FIFO. This results
in 2 register writes and 4 register reads all for nothing and taking
precious cycles from the I2C/SPI bus.

Fix this by enabling the THRI interrupt only when we fill the Tx FIFO to
its maximum capacity and there are remaining bytes to send in the message.

Fixes: cc4c1d05eb ("sc16is7xx: Properly resume TX after stop")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-7-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:20:28 +01:00
Hugo Villeneuve
dbf4ab8218 serial: sc16is7xx: convert from _raw_ to _noinc_ regmap functions for FIFO
The SC16IS7XX IC supports a burst mode to access the FIFOs where the
initial register address is sent ($00), followed by all the FIFO data
without having to resend the register address each time. In this mode, the
IC doesn't increment the register address for each R/W byte.

The regmap_raw_read() and regmap_raw_write() are functions which can
perform IO over multiple registers. They are currently used to read/write
from/to the FIFO, and although they operate correctly in this burst mode on
the SPI bus, they would corrupt the regmap cache if it was not disabled
manually. The reason is that when the R/W size is more than 1 byte, these
functions assume that the register address is incremented and handle the
cache accordingly.

Convert FIFO R/W functions to use the regmap _noinc_ versions in order to
remove the manual cache control which was a workaround when using the
_raw_ versions. FIFO registers are properly declared as volatile so
cache will not be used/updated for FIFO accesses.

Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:20:28 +01:00
Hugo Villeneuve
4409df5866 serial: sc16is7xx: change EFR lock to operate on each channels
Now that the driver has been converted to use one regmap per port, change
efr locking to operate on a channel basis instead of on the whole IC.

Fixes: 3837a03795 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc:  <stable@vger.kernel.org> # 6.1.x: 3837a03 serial: sc16is7xx: improve regmap debugfs by using one regmap per port
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:20:28 +01:00
Hugo Villeneuve
41a308cbed serial: sc16is7xx: remove unused line structure member
Now that the driver has been converted to use one regmap per port, the line
structure member is no longer used, so remove it.

Fixes: 3837a03795 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:20:28 +01:00
Hugo Villeneuve
f6959c5217 serial: sc16is7xx: remove global regmap from struct sc16is7xx_port
Remove global struct regmap so that it is more obvious that this
regmap is to be used only in the probe function.

Also add a comment to that effect in probe function.

Fixes: 3837a03795 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc:  <stable@vger.kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:20:28 +01:00
Hugo Villeneuve
6bcab3c8ac serial: sc16is7xx: remove wasteful static buffer in sc16is7xx_regmap_name()
Using a static buffer inside sc16is7xx_regmap_name() was a convenient and
simple way to set the regmap name without having to allocate and free a
buffer each time it is called. The drawback is that the static buffer
wastes memory for nothing once regmap is fully initialized.

Remove static buffer and use constant strings instead.

This also avoids a truncation warning when using "%d" or "%u" in snprintf
which was flagged by kernel test robot.

Fixes: 3837a03795 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc:  <stable@vger.kernel.org> # 6.1.x: 3837a03 serial: sc16is7xx: improve regmap debugfs by using one regmap per port
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231211171353.2901416-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:20:27 +01:00
Christophe JAILLET
96d7e361ca serdev: Remove usage of the deprecated ida_simple_xx() API
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d20d3ac106bac6b7cabe39f22ad00ac86910e0a5.1702230342.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:20:06 +01:00
Adrian Reber
e0f25b8992 tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE
The capability CAP_CHECKPOINT_RESTORE was introduced to allow non-root
users to checkpoint and restore processes as non-root with CRIU.

This change extends CAP_CHECKPOINT_RESTORE to enable the CRIU option
'--shell-job' as non-root. CRIU's man-page describes the '--shell-job'
option like this:

  Allow one to dump shell jobs. This implies the restored task will
  inherit session and process group ID from the criu itself. This option
  also allows to migrate a single external tty connection, to migrate
  applications like top.

TIOCSLCKTRMIOS can only be done if the process has CAP_SYS_ADMIN and
this change extends it to CAP_SYS_ADMIN or CAP_CHECKPOINT_RESTORE.

With this change it is possible to checkpoint and restore processes
which have a tty connection as non-root if CAP_CHECKPOINT_RESTORE is
set.

Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Adrian Reber <areber@redhat.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20231208143656.1019-1-areber@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:20:03 +01:00
Rob Herring
3d19ff562d serial: esp32_uart: Use device_get_match_data()
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.

Error checking for matching was not necessary as matching is always
successful if we're already in probe and the match tables always have data
pointers.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231207162632.2650356-2-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:20:00 +01:00
Rob Herring
2600d99394 serial: esp32_acm: Add explicit platform_device.h include
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. Soon the implicit includes are going to be removed.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231207162632.2650356-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:20:00 +01:00
Fabio Estevam
9df1dd4506 dt-bindings: serial: imx: Properly describe the i.MX1 interrupts
i.MX1 has three UART interrupts instead of a single one like other
i.MX devices.

Take this into account for properly describing the i.MX1 UART
interrupts.

This fixes the following dt-schema warning:

	from schema $id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml#yaml#

imx1-ads.dtb: serial@206000: interrupts: [[30], [29], [26]] is too long
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231206162841.2326201-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:19:56 +01:00
Donald Robson
8a53e29fe0
drm/imagination: Fix error path in pvr_vm_create_context
It is possible to double free the vm_ctx->mmu_ctx object in this
function.

    630 err_page_table_destroy:
--> 631         pvr_mmu_context_destroy(vm_ctx->mmu_ctx);

The pvr_vm_context_put() function does:

        kref_put(&vm_ctx->ref_count, pvr_vm_context_release);

Here the pvr_vm_context_release() will call:

        pvr_mmu_context_destroy(vm_ctx->mmu_ctx);

Refactor to an unwind style.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213144431.94956-2-donald.robson@imgtec.com
2023-12-15 14:04:21 +01:00
Donald Robson
f175498378
drm/imagination: Fix ERR_PTR test on pointer to pointer.
drivers/gpu/drm/imagination/pvr_vm.c:631 pvr_vm_create_context()
  error: 'vm_ctx->mmu_ctx' dereferencing possible ERR_PTR()

612         vm_ctx->mmu_ctx = pvr_mmu_context_create(pvr_dev);
613         err = PTR_ERR_OR_ZERO(&vm_ctx->mmu_ctx);
                                      ^
The address is never an error pointer so this will always return 0.
Remove the ampersand.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213144431.94956-1-donald.robson@imgtec.com
2023-12-15 14:04:16 +01:00
Donald Robson
f1f55ed3ff
drm/imagination: Fixed oops when misusing ioctl CREATE_HWRT_DATASET
While writing the matching IGT suite I discovered that it's possible to
cause a kernel oops when using DRM_IOCTL_PVR_CREATE_HWRT_DATASET when
the call to hwrt_init_common_fw_structure() fails.

Use an unwind-type error path to avoid cleaning up the object using the
the release function before it is fully resolved.

Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163019.95913-1-donald.robson@imgtec.com
2023-12-15 14:04:08 +01:00
Donald Robson
b39610c773
drm/imagination: Fixed infinite loop in pvr_vm_mips_map()
Unwinding loop in error path for this function uses unsigned limit
variable, causing the promotion of the signed counter variable.

--> 204         for (; pfn >= start_pfn; pfn--)
                       ^^^^^^^^^^^^^^^^
If start_pfn can be zero then this is an endless loop.  I've seen this
code in other places as well.  This loop is slightly off as well.  It
should decrement pfn on the first iteration.

Fix by making the loop limit variables signed. Also fix missing
predecrement by modifying to while loop.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208160825.92933-1-donald.robson@imgtec.com
2023-12-15 14:03:57 +01:00
Dan Carpenter
7fbcd195e2 usb: fotg210-hcd: delete an incorrect bounds test
Here "temp" is the number of characters that we have written and "size"
is the size of the buffer.  The intent was clearly to say that if we have
written to the end of the buffer then stop.

However, for that to work the comparison should have been done on the
original "size" value instead of the "size -= temp" value.  Not only
will that not trigger when we want to, but there is a small chance that
it will trigger incorrectly before we want it to and we break from the
loop slightly earlier than intended.

This code was recently changed from using snprintf() to scnprintf().  With
snprintf() we likely would have continued looping and passed a negative
size parameter to snprintf().  This would have triggered an annoying
WARN().  Now that we have converted to scnprintf() "size" will never
drop below 1 and there is no real need for this test.  We could change
the condition to "if (temp <= 1) goto done;" but just deleting the test
is cleanest.

Fixes: 7d50195f6c ("usb: host: Faraday fotg210-hcd driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:01:30 +01:00
Tasos Sahanidis
772685c147 usb-storage: Add quirk for incorrect WP on Kingston DT Ultimate 3.0 G3
This flash drive reports write protect during the first mode sense.

In the past this was not an issue as the kernel called revalidate twice,
thus asking the device for its write protect status twice, with write
protect being disabled in the second mode sense.

However, since commit 1e029397d1 ("scsi: sd: Reorganize DIF/DIX code to
avoid calling revalidate twice") that is no longer the case, thus the
device shows up read only.

[490891.289495] sd 12:0:0:0: [sdl] Write Protect is on
[490891.289497] sd 12:0:0:0: [sdl] Mode Sense: 2b 00 80 08

This does not appear to be a timing issue, as enabling the usbcore quirk
USB_QUIRK_DELAY_INIT has no effect on write protect.

Fixes: 1e029397d1 ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice")
Cc: stable <stable@kernel.org>
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231207134441.298131-1-tasos@tasossah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:00:58 +01:00
Johan Hovold
c994cb596b usb: typec: ucsi: fix gpio-based orientation detection
Fix the recently added connector sanity check which was off by one and
prevented orientation notifications from being handled correctly for the
second port when using GPIOs to determine orientation.

Fixes: c6165ed2f4 ("usb: ucsi: glink: use the connector orientation GPIO to provide switch events")
Cc: stable <stable@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231208123603.29957-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:00:28 +01:00
Jose Ignacio Tornos Martinez
aef05e349b net: usb: ax88179_178a: avoid failed operations when device is disconnected
When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19

The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the disconnecting status is enabled.

cc:  <stable@vger.kernel.org>
Fixes: e2ca90c276 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 14:00:03 +01:00
Nam Cao
644f315d12
spi: pl022: update description of internal_cs_control()
The arguments of internal_cs_control() was changed, but its description
was not updated. Update the description to match the expected arguments.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312151816.munFeE4L-lkp@intel.com/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/4036d8d5845c04179f330f83e825a3921aa50c5a.1702639801.git.namcao@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-15 12:58:18 +00:00
Nam Cao
e695c1fc5a
spi: pl022: delete description of cur_msg
The variable cur_msg was removed, but its description is left behind.
Delete this description.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312151816.munFeE4L-lkp@intel.com/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/f06a9b6eac184cc648ae7444c480add6da87a84d.1702639801.git.namcao@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-15 12:58:17 +00:00
Wang Jinchao
e7a4a2fd9a
ASoC: fsl_mqs: remove duplicated including
rm the second \#include <linux/of.h>

Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Link: https://msgid.link/r/202312151713+0800-wangjinchao@xfusion.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-15 12:58:08 +00:00
Wang Jinchao
02842209fc
ASoC: SOF: amd: remove duplicated including
remove the second \#include "../sof-audio.h"

Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Link: https://msgid.link/r/202312151719+0800-wangjinchao@xfusion.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-15 12:58:07 +00:00
Rander Wang
3a0e7bb86f
ASoC: SOF: Intel: check fw_context_save for library reload
If fw_context_save is defined by fw, driver can skip library reload on
d3 exit or reload library.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20231215083102.3064200-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-15 12:57:57 +00:00
Rander Wang
855a4772be
ASoC: SOF: IPC4: query fw_context_save feature from fw
Driver queries fw_context_save feature when fw is ready and can skip
library reload with this feature since library is saved in persistent
memory. The default value of fw_context_save is true unless fw reports
false.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20231215083102.3064200-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-15 12:57:56 +00:00
Rander Wang
57cd29a825
ASoC: SOF: IPC4: synchronize fw_config_params with fw definitions
Update fw_config_params in driver.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20231215083102.3064200-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-15 12:57:56 +00:00
Abel Vesa
c51ffe929f dt-bindings: usb: qcom,dwc3: Add X1E80100 binding
Add X1E80100 to the DT schema.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231214-x1e80100-usb-v1-1-c22be5c0109e@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:56:12 +01:00
Ghanshyam Agrawal
4d2f8c8591 usb: typec: fixed a typo
Fixed one typo.

Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Link: https://lore.kernel.org/r/20231215083930.566164-1-ghanshyam1898@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:56:07 +01:00
Alexander Stein
776630be36 usb: cdns3: Use dev_err_probe
Create an error message or upon deferral add a description for sysfs.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20231214144011.1987586-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:56 +01:00
Dmitry Antipov
61fbf20312 usb: gadget: f_fs: fix fortify warning
When compiling with gcc version 14.0.0 20231206 (experimental)
and CONFIG_FORTIFY_SOURCE=y, I've noticed the following warning:

...
In function 'fortify_memcpy_chk',
    inlined from '__ffs_func_bind_do_os_desc' at drivers/usb/gadget/function/f_fs.c:2934:3:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  588 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This call to 'memcpy()' is interpreted as an attempt to copy both
'CompatibleID' and 'SubCompatibleID' of 'struct usb_ext_compat_desc'
from an address of the first one, which causes an overread warning.
Since we actually want to copy both of them at once, use the
convenient 'struct_group()' and 'sizeof_field()' here.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231214090428.27292-1-dmantipov@yandex.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:45 +01:00
Lee Jones
3e42084a1c usb: storage: Remove snprintf() from sysfs call-backs and replace with sysfs_emit()
Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.

In the case of sysfs call-backs, new wrappers exist that do just that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc:  <usb-storage@lists.one-eyed-alien.net>
Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231213164246.1021885-13-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:30 +01:00
Lee Jones
e5892ea815 usb: phy: twl6030: Remove snprintf() from sysfs call-backs and replace with sysfs_emit()
Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.

In the case of sysfs call-backs, new wrappers exist that do just that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Hema HK <hemahk@ti.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-12-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:30 +01:00
Lee Jones
9d4e3d15d7 usb: mon_text: Replace snprintf() with the safer scnprintf() variant
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-11-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:30 +01:00
Lee Jones
7963256961 usb: mon_stat: Replace snprintf() with the safer scnprintf() variant
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-10-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:30 +01:00
Lee Jones
86b20af11e usb: yurex: Replace snprintf() with the safer scnprintf() variant
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Whilst we're at it, let's define some magic numbers to increase
readability and ease of maintenance.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-9-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:30 +01:00
Lee Jones
a6eef67cdb usb: host: max3421-hcd: Replace snprintf() with the safer scnprintf() variant
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Cristian Birsan <cristian.birsan@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc:  <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-8-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:30 +01:00
Lee Jones
01dc7f7c29 usb: cdns2: Replace snprintf() with the safer scnprintf() variant
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-7-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:30 +01:00
Lee Jones
d32dcb0659 usb: gadget: udc: atmel: Replace snprintf() with the safer scnprintf() variant
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Cristian Birsan <cristian.birsan@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc:  <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-6-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:29 +01:00
Lee Jones
0d12c1cca7 usb: gadget: uvc: Replace snprintf() with the safer scnprintf() variant
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Scally <dan.scally@ideasonboard.com>
Cc: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20231213164246.1021885-5-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:29 +01:00
Lee Jones
60034e0aed usb: gadget: f_uac2: Replace snprintf() with the safer scnprintf() variant
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: James Gruber <jimmyjgruber@gmail.com>
Cc: Yadwinder Singh <yadi.brar01@gmail.com>
Cc: Jaswinder Singh <jaswinder.singh@linaro.org>
Cc: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-4-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:29 +01:00
Lee Jones
c1a371866d usb: gadget: f_uac1: Replace snprintf() with the safer scnprintf() variant
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Cc: Julian Scheel <julian@jusst.de>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-3-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:29 +01:00
Lee Jones
0466e7e693 usb: gadget: configfs: Replace snprintf() with the safer scnprintf() variant
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-2-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:55:29 +01:00
Perr Zhang
b8fb6db6cb usb: f_uac1: adds support for SS and SSP
Patch adds support of SS and SSP speed.
Tested with rockchip rk3399 dwc3

Signed-off-by: Perr Zhang <perr@usb7.net>
Link: https://lore.kernel.org/r/20231213112106.605260-1-strongbox8@zoho.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:54:37 +01:00
Neil Armstrong
36d586c057 usb: typec: mux: add Qualcomm WCD939X USB SubSystem Altmode Mux driver
Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a
functionally separate USB SubSystem for Altmode/Analog Audio Switch
accessible over an I2C interface.

It provides switching USB-C USB2.0 lines between USB and Audio Headphones
speaker lines, and the USB-C SBU lines between DisplayPort AUX and Audio
Headphones Microphone/Ground.

The Audio Headphone and Microphone data path between the Codec and the
USB-C Mux subsystems are external to the IC, thus requiring DT
port-endpoint graph description to handle USB-C altmode & orientation
switching for Audio Accessory Mode.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231212-topic-sm8650-upstream-wcd939x-usbss-v2-2-38961fea5867@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:54:13 +01:00
Neil Armstrong
de12c53843 dt-bindings: usb: Document WCD939x USB SubSystem Altmode/Analog Audio Switch
Document the Qualcomm WCD9390/WCD9395 USB SubSystem Altmode/Analog Audio Switch
which is a separate USB SubSystem for Altmode/Analog Audio Switch accessible
over an I2C interface.

Since Audio Headphone and Microphone data path between the Codec and the USB-C Mux
subsystems are external to the IC, it requires a second port to handle USB-C altmode
& orientation switching for Audio Accessory Mode to the Codec SubSystem.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231212-topic-sm8650-upstream-wcd939x-usbss-v2-1-38961fea5867@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:54:13 +01:00
Douglas Anderson
44995e6f07 usb: core: Fix crash w/ usb_choose_configuration() if no driver
It's possible that usb_choose_configuration() can get called when a
USB device has no driver. In this case the recent commit a87b8e3be9
("usb: core: Allow subclassed USB drivers to override
usb_choose_configuration()") can cause a crash since it dereferenced
the driver structure without checking for NULL. Let's add a check.

A USB device with no driver is an anomaly, so make
usb_choose_configuration() return immediately if there is no driver.

This was seen in the real world when usbguard got ahold of a r8152
device at the wrong time. It can also be simulated via this on a
computer with one r8152-based USB Ethernet adapter:
  cd /sys/bus/usb/drivers/r8152-cfgselector
  to_unbind="$(ls -d *-*)"
  real_dir="$(readlink -f "${to_unbind}")"
  echo "${to_unbind}" > unbind
  cd "${real_dir}"
  echo 0 > authorized
  echo 1 > authorized

Fixes: a87b8e3be9 ("usb: core: Allow subclassed USB drivers to override usb_choose_configuration()")
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231211073237.v3.1.If27eb3bf7812f91ab83810f232292f032f4203e0@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:54:09 +01:00
Kyle Tso
7d530f4cc0 usb: typec: tcpm: Query Source partner for FRS capability only if it is DRP
Source-only port partner will always respond NOT_SUPPORTED to
GET_SINK_CAP. Avoid this redundant AMS by bailing out querying the FRS
capability if the Source port partner is not DRP.

Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231205074747.1821297-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:53:58 +01:00
Dmitry Baryshkov
70e6163d17 arm64: dts: qcom: qrb5165-rb5: use u16 for DP altmode svid
Follow the bindings and use 16-bit value for AltMode SVID instead of
using the full u32.

Fixes: b3dea91412 ("arm64: dts: qcom: qrb5165-rb5: enable DP altmode")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231204020303.2287338-4-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:53:45 +01:00
Dmitry Baryshkov
0dbda97186 usb: typec: change altmode SVID to u16 entry
As stated in the changelog for the commit 7b458a4c5d ("usb: typec: Add
typec_port_register_altmodes()"), the code should be adjusted according
to the AltMode bindings. As the SVID is 16 bits wide (according to the
USB PD Spec), use fwnode_property_read_u16() to read it.

Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231204020303.2287338-3-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:53:45 +01:00
Dmitry Baryshkov
d1756ac67e dt-bindings: connector: usb: add altmodes description
Add description of the USB-C AltModes supported on the particular USB-C
connector. This is required for devices like Qualcomm Robotics RB5,
which have no other way to express alternative modes supported by the
hardware platform.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231204020303.2287338-2-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 13:53:44 +01:00