Add a label so that a bit of exception handling can be better reused
at the end of this function implementation.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/5faec5de-fc36-4b38-abcb-c61954a824cd@web.de
Signed-off-by: Lee Jones <lee@kernel.org>
If both set_brightness functions return -ENOTSUPP, then the LED doesn't
support setting a fixed brightness value, and the error message isn't
helpful. This can be the case e.g. for LEDs supporting a specific hw
trigger only.
Pinched the subject line and commit message from Heiner:
Link: https://lore.kernel.org/all/44177e37-9512-4044-8991-bb23b184bf37@gmail.com/
Reworked the function to provide Heiner's required semantics whilst
simultaneously increasing readability and flow.
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-leds@vger.kernel.org
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
The for_each_child_of_node() macro automatically decrements the child
refcount at the end of every iteration. On early exits, of_node_put()
must be used to manually decrement the refcount and avoid memory leaks.
The scoped version of the macro accounts for such early breaks, fixing
the early exits without the need for explicit calls to of_node_put().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202406172314.2vVgelaS-lkp@intel.com/
Fixes: b72755f5b5 ("backlight: Add new lm3509 backlight driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240624-lm3509_bl_scoped-v1-1-ceba9df38f23@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
For SoCs like gs101 that need a special regmap, register this with
of_syscon_register_regmap api, so it can be returned by
syscon_regmap_lookup_by_phandle() and friends.
For SoCs that don't require a custom regmap, revert back to syscon
creating the mmio regmap rather than duplicating the logic here.
exynos_get_pmu_regmap_by_phandle() api is also updated to retrieve
the regmap via syscon. The exynos_get_pmu_regmap_by_phandle() api
is kept around until fw_devlink support for syscon property is added
for the pinctrl-samsung driver that also runs at postcore_initcall
level.
All other exynos client drivers can revert back to
syscon_regmap_lookup_by_phandle().
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240621115544.1655458-3-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The of_syscon_register_regmap() API allows an externally created regmap
to be registered with syscon. This regmap can then be returned to client
drivers using the syscon_regmap_lookup_by_phandle() APIs.
The API is used by platforms where mmio access to the syscon registers is
not possible, and a underlying soc driver like exynos-pmu provides a SoC
specific regmap that can issue a SMC or hypervisor call to write the
register.
This approach keeps the SoC complexities out of syscon, but allows common
drivers such as syscon-poweroff, syscon-reboot and friends that are used
by many SoCs already to be re-used.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240621115544.1655458-2-peter.griffin@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The timeout when waiting for the PRE safe window is rather short, as
normally we would only need to wait a few dozen usecs for the problematic
scanline region to pass and we don't want to spin too long in case
something goes wrong. This however mixes badly with preemption, as we
can easily get scheduled away from the CPU for a longer time than our
timeout, in which case we would hit a spurious timeout and wrongly skip
the PRE update.
Instead of disabling preemption across the wait loop, potentially
impacting the overall system latency, use a wait loop with a fixed
max number of iterations, so time spent away from the CPU is not
accounted against the timeout budget.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20240517104549.3648939-3-l.stach@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517104549.3648939-3-l.stach@pengutronix.de
imx-drm doesn't mandate a modeset when the framebuffer modifier changes,
but currently the tile prefetch and resolve (TPR) configuration of the
PRE is only set up on the initial modeset.
As the TPR configuration is double buffered, same as all the other PRE
states, we can support dynamic reconfiguration of the buffer layout from
one frame to another. As switching between (super-)tiled and linear
prefetch needs to touch the CTRL register make sure to do the
reconfiguration inside the safe window.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20240517104549.3648939-2-l.stach@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517104549.3648939-2-l.stach@pengutronix.de
Björn Töpel <bjorn@kernel.org> says:
From: Björn Töpel <bjorn@rivosinc.com>
================================================================
Memory Hot(Un)Plug support (and ZONE_DEVICE) for the RISC-V port
================================================================
Introduction
============
To quote "Documentation/admin-guide/mm/memory-hotplug.rst": "Memory
hot(un)plug allows for increasing and decreasing the size of physical
memory available to a machine at runtime."
This series adds memory hot(un)plugging, and ZONE_DEVICE support for
the RISC-V Linux port.
MM configuration
================
RISC-V MM has the following configuration:
* Memory blocks are 128M, analogous to x86-64. It uses PMD
("hugepage") vmemmaps. From that follows that 2M (PMD) worth of
vmemmap spans 32768 pages á 4K which gets us 128M.
* The pageblock size is the minimum minimum virtio_mem size, and on
RISC-V it's 2M (2^9 * 4K).
Implementation
==============
The PGD table on RISC-V is shared/copied between for all processes. To
avoid doing page table synchronization, the first patch (patch 1)
pre-allocated the PGD entries for vmemmap/direct map. By doing that
the init_mm PGD will be fixed at kernel init, and synchronization can
be avoided all together.
The following two patches (patch 2-3) does some preparations, followed
by the actual MHP implementation (patch 4-5). Then, MHP and virtio-mem
are enabled (patch 6-7), and finally ZONE_DEVICE support is added
(patch 8).
MHP and locking
===============
TL;DR: The MHP does not step on any toes, except for ptdump.
Additional locking is required for ptdump.
Long version: For v2 I spent some time digging into init_mm
synchronization/update. Here are my findings, and I'd love them to be
corrected if incorrect.
It's been a gnarly path...
The `init_mm` structure is a special mm (perhaps not a "real" one).
It's a "lazy context" that tracks kernel page table resources, e.g.,
the kernel page table (swapper_pg_dir), a kernel page_table_lock (more
about the usage below), mmap_lock, and such.
`init_mm` does not track/contain any VMAs. Having the `init_mm` is
convenient, so that the regular kernel page table walk/modify
functions can be used.
Now, `init_mm` being special means that the locking for kernel page
tables are special as well.
On RISC-V the PGD (top-level page table structure), similar to x86, is
shared (copied) with user processes. If the kernel PGD is modified, it
has to be synched to user-mode processes PGDs. This is avoided by
pre-populating the PGD, so it'll be fixed from boot.
The in-kernel pgd regions are documented in
`Documentation/arch/riscv/vm-layout.rst`.
The distinct regions are:
* vmemmap
* vmalloc/ioremap space
* direct mapping of all physical memory
* kasan
* modules, BPF
* kernel
Memory hotplug is the process of adding/removing memory to/from the
kernel.
Adding is done in two phases:
1. Add the memory to the kernel
2. Online memory, making it available to the page allocator.
Step 1 is partially architecture dependent, and updates the init_mm
page table:
* Update the direct map page tables. The direct map is a linear map,
representing all physical memory: `virt = phys + PAGE_OFFSET`
* Add a `struct page` for each added page of memory. Update the
vmemmap (virtual mapping to the `struct page`, so we can easily
transform a kernel virtual address to a `struct page *` address.
From an MHP perspective, there are two regions of the PGD that are
updated:
* vmemmap
* direct mapping of all physical memory
The `struct mm_struct` has a couple of locks in play:
* `spinlock_t page_table_lock` protects the page table, and some
counters
* `struct rw_semaphore mmap_lock` protect an mm's VMAs
Note again that `init_mm` does not contain any VMAs, but still uses
the mmap_lock in some places.
The `page_table_lock` was originally used to to protect all pages
tables, but more recently a split page table lock has been introduced.
The split lock has a per-table lock for the PTE and PMD tables. If
split lock is disabled, all tables are guarded by
`mm->page_table_lock` (for user processes). Split page table locks are
not used for init_mm.
MHP operations is typically synchronized using
`DEFINE_STATIC_PERCPU_RWSEM(mem_hotplug_lock)`.
Actors
------
The following non-MHP actors in the kernel traverses (read), and/or
modifies the kernel PGD.
* `ptdump`
Walks the entire `init_mm`, via `ptdump_walk_pgd()` with the
`mmap_write_lock(init_mm)` taken.
Observation: ptdump can race with MHP, and needs additional locking
to avoid crashes/races.
* `set_direct_*` / `arch/riscv/mm/pageattr.c`
The `set_direct_*` functionality is used to "synchronize" the
direct map to other kernel mappings, e.g. modules/kernel text. The
direct map is using "as large huge table mappings as possible",
which means that the `set_direct_*` might need to split the direct
map.
The `set_direct_*` functions operates with the
`mmap_write_lock(init_mm)` taken.
Observation: `set_direct_*` uses the direct map, but will never
modify the same entry as MHP. If there is a mapping, that entry will
never race with MHP. Further, MHP acts when memory is offline.
* HVO / `mm/hugetlb_vmemmap`
HVO optimizes the backing `struct page` for hugetlb pages, which
means changing the "vmemmap" region. HVO can split (merge?) a
vmemmap pmd. However, it will never race with MHP, since HVO only
operates at online memory. HVO cannot touch memory being MHP added
or removed.
* `apply_to_page_range`
Walks a range, creates pages and applies a callback (setting
permissions) for the page.
When creating a table, it might use `int __pte_alloc_kernel(pmd_t
*pmd)` which takes the `init_mm.page_table_lock` to synchronize pmd
populate.
Used by: `mm/vmalloc.c` and `mm/kasan/shadow.c`. The KASAN callback
takes the `init_mm.page_table_lock` to synchronize pte creation.
Observations: `apply_to_page_range` applies to the "vmalloc/ioremap
space" region, and "kasan" region. *Not* affected by MHP.
* `apply_to_existing_page_range`
Walks a range, applies a callback (setting permissions) for the
page (no page creation).
Used by: `kernel/bpf/arena.c` and `mm/kasan/shadow.c`. The KASAN
callback takes the `init_mm.page_table_lock` to synchronize pte
creation. *Not* affected by MHP regions.
* `apply_to_existing_page_range` applies to the "vmalloc/ioremap
space" region, and "kasan" region. *Not* affected by MHP regions.
* `ioremap_page_range` and `vmap_page_range`
Uses the same internal function, and might create table entries at
the "vmalloc/ioremap space" region. Can call
`__pte_alloc_kernel()` which takes the `init_mm.page_table_lock`
synchronizing pmd populate in the region. *Not* affected by MHP
regions.
Summary:
* MHP add will never modify the same page table entries, as any of
the other actors.
* MHP remove is done when memory is offlined, and will not clash
with any of the actors.
* Functions that walk the entire kernel page table need
synchronization
* It's sufficient to add the MHP lock ptdump.
Testing
=======
This series adds basic DT supported hotplugging. There is a QEMU
series enabling MHP for the RISC-V "virt" machine here: [1]
ACPI/MSI support is still in the making for RISC-V, and prior proper
(ACPI) PCI MSI support lands [2] and NUMA SRAT support [3], it hard to
try it out.
I've prepared a QEMU branch with proper ACPI GED/PC-DIMM support [4],
and a this series with the required prerequisites [5] (AIA, ACPI AIA
MADT, ACPI NUMA SRAT).
To test with virtio-mem, e.g.:
| qemu-system-riscv64 \
| -machine virt,aia=aplic-imsic \
| -cpu rv64,v=true,vlen=256,elen=64,h=true,zbkb=on,zbkc=on,zbkx=on,zkr=on,zkt=on,svinval=on,svnapot=on,svpbmt=on \
| -nodefaults \
| -nographic -smp 8 -kernel rv64-u-boot.bin \
| -drive file=rootfs.img,format=raw,if=virtio \
| -device virtio-rng-pci \
| -m 16G,slots=3,maxmem=32G \
| -object memory-backend-ram,id=mem0,size=16G \
| -numa node,nodeid=0,memdev=mem0 \
| -serial chardev:char0 \
| -mon chardev=char0,mode=readline \
| -chardev stdio,mux=on,id=char0 \
| -device pci-serial,id=serial0,chardev=char0 \
| -object memory-backend-ram,id=vmem0,size=2G \
| -device virtio-mem-pci,id=vm0,memdev=vmem0,node=0
where "rv64-u-boot.bin" is U-boot with EFI/ACPI-support (use [6] if
you're lazy).
In the QEMU monitor:
| (qemu) info memory-devices
| (qemu) qom-set vm0 requested-size 1G
...to test DAX/KMEM, use the follow QEMU parameters:
| -object memory-backend-file,id=mem1,share=on,mem-path=virtio_pmem.img,size=4G \
| -device virtio-pmem-pci,memdev=mem1,id=nv1
and the regular ndctl/daxctl dance.
If you're brave to try the ACPI branch, add "acpi=on" to "-machine
virt", and test PC-DIMM MHP (in addition to virtio-{p},mem):
In the QEMU monitor:
| (qemu) object_add memory-backend-ram,id=mem1,size=1G
| (qemu) device_add pc-dimm,id=dimm1,memdev=mem1
You can also try hot-remove with some QEMU options, say:
| -object memory-backend-file,id=mem-1,size=256M,mem-path=/pagesize-2MB
| -device pc-dimm,id=mem1,memdev=mem-1
| -object memory-backend-file,id=mem-2,size=1G,mem-path=/pagesize-1GB
| -device pc-dimm,id=mem2,memdev=mem-2
| -object memory-backend-file,id=mem-3,size=256M,mem-path=/pagesize-2MB
| -device pc-dimm,id=mem3,memdev=mem-3
Remove "acpi=on" to run with DT.
Thanks to Alex, Andrew, David, and Oscar for all
comments/tests/fixups.
References
==========
[1] https://lore.kernel.org/qemu-devel/20240521105635.795211-1-bjorn@kernel.org/
[2] https://lore.kernel.org/linux-riscv/20240501121742.1215792-1-sunilvl@ventanamicro.com/
[3] https://lore.kernel.org/linux-riscv/cover.1713778236.git.haibo1.xu@intel.com/
[4] https://github.com/bjoto/qemu/commits/virtio-mem-pc-dimm-mhp-acpi-v2/
[5] https://github.com/bjoto/linux/commits/mhp-v4-acpi
[6] https://github.com/bjoto/riscv-rootfs-utils/tree/acpi
* b4-shazam-merge:
riscv: Enable DAX VMEMMAP optimization
riscv: mm: Add support for ZONE_DEVICE
virtio-mem: Enable virtio-mem for RISC-V
riscv: Enable memory hotplugging for RISC-V
riscv: mm: Take memory hotplug read-lock during kernel page table dump
riscv: mm: Add memory hotplugging support
riscv: mm: Add pfn_to_kaddr() implementation
riscv: mm: Refactor create_linear_mapping_range() for memory hot add
riscv: mm: Change attribute from __init to __meminit for page functions
riscv: mm: Pre-allocate vmemmap/direct map/kasan PGD entries
riscv: mm: Properly forward vmemmap_populate() altmap parameter
Link: https://lore.kernel.org/r/20240605114100.315918-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that DAX is usable, enable the DAX VMEMMAP optimization as well.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240605114100.315918-12-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ZONE_DEVICE pages need DEVMAP PTEs support to function
(ARCH_HAS_PTE_DEVMAP). Claim another RSW (reserved for software) bit
in the PTE for DEVMAP mark, add the corresponding helpers, and enable
ARCH_HAS_PTE_DEVMAP for riscv64.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240605114100.315918-11-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that RISC-V has memory hotplugging support, virtio-mem can be used
on the platform.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240605114100.315918-10-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
During memory hot remove, the ptdump functionality can end up touching
stale data. Avoid any potential crashes (or worse), by holding the
memory hotplug read-lock while traversing the page table.
This change is analogous to arm64's commit bf2b59f60e ("arm64/mm:
Hold memory hotplug lock while walking for kernel page table dump").
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240605114100.315918-8-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For an architecture to support memory hotplugging, a couple of
callbacks needs to be implemented:
arch_add_memory()
This callback is responsible for adding the physical memory into the
direct map, and call into the memory hotplugging generic code via
__add_pages() that adds the corresponding struct page entries, and
updates the vmemmap mapping.
arch_remove_memory()
This is the inverse of the callback above.
vmemmap_free()
This function tears down the vmemmap mappings (if
CONFIG_SPARSEMEM_VMEMMAP is enabled), and also deallocates the
backing vmemmap pages. Note that for persistent memory, an
alternative allocator for the backing pages can be used; The
vmem_altmap. This means that when the backing pages are cleared,
extra care is needed so that the correct deallocation method is
used.
arch_get_mappable_range()
This functions returns the PA range that the direct map can map.
Used by the MHP internals for sanity checks.
The page table unmap/teardown functions are heavily based on code from
the x86 tree. The same remove_pgd_mapping() function is used in both
vmemmap_free() and arch_remove_memory(), but in the latter function
the backing pages are not removed.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240605114100.315918-7-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The pfn_to_kaddr() function is used by KASAN's memory hotplugging
path. Add the missing function to the RISC-V port, so that it can be
built with MHP and CONFIG_KASAN.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240605114100.315918-6-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a parameter to the direct map setup function, so it can be used in
arch_add_memory() later.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240605114100.315918-5-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Prepare for memory hotplugging support by changing from __init to
__meminit for the page table functions that are used by the upcoming
architecture specific callbacks.
Changing the __init attribute to __meminit, avoids that the functions
are removed after init. The __meminit attribute makes sure the
functions are kept in the kernel text post init, but only if memory
hotplugging is enabled for the build.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240605114100.315918-4-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The RISC-V port copies the PGD table from init_mm/swapper_pg_dir to
all userland page tables, which means that if the PGD level table is
changed, other page tables has to be updated as well.
Instead of having the PGD changes ripple out to all tables, the
synchronization can be avoided by pre-allocating the PGD entries/pages
at boot, avoiding the synchronization all together.
This is currently done for the bpf/modules, and vmalloc PGD regions.
Extend this scheme for the PGD regions touched by memory hotplugging.
Prepare the RISC-V port for memory hotplug by pre-allocate
vmemmap/direct map/kasan entries at the PGD level. This will roughly
waste ~128 (plus 32 if KASAN is enabled) worth of 4K pages when memory
hotplugging is enabled in the kernel configuration.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240605114100.315918-3-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Make sure that the altmap parameter is properly passed on to
vmemmap_populate_hugepages().
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240605114100.315918-2-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, the Rx data path only supports parsing peer metadata of version
zero. However, the QCN9274 platform configures the peer metadata version
as V1B. When V1B peer metadata is parsed using the version zero logic,
invalid data is populated, causing valid packets to be dropped. To address
this issue, refactor the peer metadata version and add the version based
parsing to populate the data from peer metadata correctly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: 2870338109 ("wifi: ath12k: add support for peer meta data version")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240624145418.2043461-1-quic_periyasa@quicinc.com
Pdev id from mac phy capabilities will be sent as a part of
HTT/WMI command to firmware. This causes issue with single pdev
devices where firmware does not respond to the WMI/HTT request
sent from host.
For single pdev devices firmware expects pdev id as 1 for 5 GHz/6 GHz
phy and 2 for 2 GHz band. Add wrapper ath12k_mac_get_target_pdev_id()
to help fetch right pdev for single pdev devices.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240621102809.3984004-1-quic_rgnanase@quicinc.com
dma_pad_mask is a queue_limits by all ways of looking at it, so move it
there and set it through the atomic queue limits APIs.
Add a little helper that takes the alignment and pad into account to
simplify the code that is touched a bit.
Note that there never was any need for the > check in
blk_queue_update_dma_pad, this probably was just copy and paste from
dma_update_dma_alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that all updates go through blk_validate_limits the default of 511
is set at initialization time. Also remove the unused NULL check as
calling this helper on a NULL queue can't happen (and doesn't make
much sense to start with).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark blk_apply_bdi_limits non-static and open code disk_update_readahead
in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
"static" never goes on a line of its own.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
... and let sparse help us catch mismatches or abuses.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a flag for ->flags and not a feature for ->features. And fix the
one place that actually incorrectly cleared it from ->features.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check the features flag and the override flag using the
blk_queue_write_cache, helper otherwise we're going to always
report "write through".
Fixes: 1122c0c1cc ("block: move cache control settings out of queue->flags")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240626142637.300624-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The md driver wants to enforce a number of flags for all devices, even
when not inheriting them from the underlying devices. To make sure these
flags survive the queue_limits_set calls that md uses to update the
queue limits without deriving them form the previous limits add a new
md_init_stacking_limits helper that calls blk_set_stacking_limits and sets
these flags.
Fixes: 1122c0c1cc ("block: move cache control settings out of queue->flags")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have the same macro in main and verbs files and we don't use the macro
in the verbs file, remove it.
Link: https://lore.kernel.org/r/20240624160918.27060-3-mrgolin@amazon.com
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace 'int' with proper 'enum lpass_codec_version' in every place
which handles the parsed codec version (not raw register values!) to be
explicit about contents of the variable. This makes code easier to read
and compilers could check missing switch cases.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625165736.722106-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm LPASS macro codec driver parses registers in order to
detect version of the codec. It recognizes codecs v2.0 - v2.8, however
we know that there are earlier versions and 'enum lpass_codec_version'
has also v1.0, v1.1 and v1.2. If by any chance we run on unrecognized
version, driver will use random value from the stack as the codec
version.
Fix it by mapping such cases to an enum of value 0:
LPASS_CODEC_VERSION_UNKNOWN.
Fixes: 378918d591 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625165736.722106-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify register setting sequence of enabling inline command
to fix issue of random interrupt from push-button.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/9a7a3a66cbcb426487ca6f558f45e922@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use offset_in_page() instead of open-coding it.
Link: https://lore.kernel.org/r/20240624160918.27060-2-mrgolin@amazon.com
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Device mapper sends flush bios to all the targets and the targets send it
to the underlying device. That may be inefficient, for example if a table
contains 10 linear targets pointing to the same physical device, then
device mapper would send 10 flush bios to that device - despite the fact
that only one bio would be sufficient.
This commit optimizes the flush behavior. It introduces a per-target
variable flush_bypasses_map - it is set when the target supports flush
optimization - currently, the dm-linear and dm-stripe targets support it.
When all the targets in a table have flush_bypasses_map,
flush_bypasses_map on the table is set. __send_empty_flush tests if the
table has flush_bypasses_map - and if it has, no flush bios are sent to
the targets via the "map" method and the list dm_table->devices is
iterated and the flush bios are sent to each member of the list.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Suggested-by: Yang Yang <yang.yang@vivo.com>
'struct power_supply_maintenance_charge_table' is not modified in this
driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, some code also needs to be adjusted to this new const
qualifier.
On a x86_64, with allmodconfig:
Before:
======
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
4055 4584 0 8639 21bf drivers/power/supply/samsung-sdi-battery.o
After:
=====
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
4087 4552 0 8639 21bf drivers/power/supply/samsung-sdi-battery.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6caafd0ac2556a40405273b1a4badc508ea8e9b0.1719125040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
'struct power_supply_vbat_ri_table' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increase overall security.
In order to do it, some code also needs to be adjusted to this new const
qualifier.
On a x86_64, with allmodconfig:
Before:
======
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
955 7664 0 8619 21ab drivers/power/supply/samsung-sdi-battery.o
After:
=====
$ size drivers/power/supply/samsung-sdi-battery.o
text data bss dec hex filename
4055 4584 0 8639 21bf drivers/power/supply/samsung-sdi-battery.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/d01818abd880bf435d1106a9a6cc11a7a8a3e661.1719125040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
While queue_setup was correct for CREATE_BUFS support for
video devices, for VBI, SDR and touch devices it was wrong.
This was found after adding new v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In several places a division by fmt->vdownsampling[p] was
missing in the sizeimage[p] calculation, causing incorrect
behavior for multiplanar formats were some planes are smaller
than the first plane.
Found by new v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If we allocate a bio that is larger than NVMe maximum request size,
attach integrity metadata to it and send it to the NVMe subsystem, the
integrity metadata will be corrupted.
Splitting the bio works correctly. The function bio_split will clone the
bio, trim the iterator of the first bio and advance the iterator of the
second bio.
However, the function rq_integrity_vec has a bug - it returns the first
vector of the bio's metadata and completely disregards the metadata
iterator that was advanced when the bio was split. Thus, the second bio
uses the same metadata as the first bio and this leads to metadata
corruption.
This commit changes rq_integrity_vec, so that it calls mp_bvec_iter_bvec
instead of returning the first vector. mp_bvec_iter_bvec reads the
iterator and uses it to build a bvec for the current position in the
iterator.
The "queue_max_integrity_segments(rq->q) > 1" check was removed, because
the updated rq_integrity_vec function works correctly with multiple
segments.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/49d1afaa-f934-6ed2-a678-e0d428c63a65@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These two defines have the same purpose and this change doesn't
introduce any differences in drivers/counter/stm32-timer-cnt.o.
The only difference between the two is that
TIM_DIER_CC_IE(1) == TIM_DIER_CC2IE
while
TIM_DIER_CCxIE(1) == TIM_DIER_CC1IE
. That makes it necessary to have an explicit "+ 1" in the user code,
but IMHO this is a good thing as this is the code locatation that
"knows" that for software channel 1 you have to use TIM_DIER_CC2IE
(because software guys start counting at 0, while the relevant hardware
designer started at 1).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: William Breathitt Gray <wbg@kernel.org>
Link: https://lore.kernel.org/r/126bd153a03f39e42645573eecf44ffab5354fc7.1718791090.git.u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
There are some registers that belong together and are numbered from 1 to
4. Introduce a macro definition for these that takes the channel number
as parameter and define the previously available constants using the new
ones.
This allows to simplify some users that up to now use constructs like
TIM_CCER_CC1NE << (ch * 4)
which is an ugly mix of using a predefined value and still knowing
internal details about it.
Note that there are several decrements by 1 involved. These are
necessary because software guys start counting at 0 while the hardware
designer started at 1 (and having TIM_CCER_CCxE(1) be TIM_CCER_CC2E
isn't a sane option). The compiler is expected to optimize these out
nicely.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/05df15f61dde81033407d3b4fcb67ee403ecc8db.1718791090.git.u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
