To avoid leakage for QPs assocoated with SRQ, according to IB spec
(section 10.3.1):
"Note, for QPs that are associated with an SRQ, the Consumer should take
the QP through the Error State before invoking a Destroy QP or a Modify
QP to the Reset State. The Consumer may invoke the Destroy QP without
first performing a Modify QP to the Error State and waiting for the Affiliated
Asynchronous Last WQE Reached Event. However, if the Consumer
does not wait for the Affiliated Asynchronous Last WQE Reached Event,
then WQE and Data Segment leakage may occur. Therefore, it is good
programming practice to teardown a QP that is associated with an SRQ
by using the following process:
- Put the QP in the Error State;
- wait for the Affiliated Asynchronous Last WQE Reached Event;
- either:
- drain the CQ by invoking the Poll CQ verb and either wait for CQ
to be empty or the number of Poll CQ operations has exceeded
CQ capacity size; or
- post another WR that completes on the same CQ and wait for this
WR to return as a WC;
- and then invoke a Destroy QP or Reset QP."
Catch the Last WQE Reached Event in the core layer during drain QP flow.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20240619171153.34631-2-mgurtovoy@nvidia.com
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When creating a QP, one of the attributes is TS format (timestamp).
In some devices, we have a limitation that all QPs should have the same
ts_format. The ts_format is chosen based on the device's capability.
The qp_ts_format cap resides under the RoCE caps table, and the
cap will be 0 when RoCE is disabled. So when RoCE is disabled, the
value that should be queried is sq_ts_format under HCA caps.
Consider the case when the system supports REAL_TIME_TS format (0x2),
some QPs are created with REAL_TIME_TS as ts_format, and afterwards
RoCE gets disabled. When trying to construct a new QP, we can't use
the qp_ts_format, that is queried from the RoCE caps table, Since it
leads to passing 0x0 (FREE_RUNNING_TS) as the value of the qp_ts_format,
which is different than the ts_format of the previously allocated
QPs REAL_TIME_TS format (0x2).
Thus, to resolve this, read the sq_ts_format, which also reflect
the supported ts format for the QP when RoCE is disabled.
Fixes: 4806f1e2fe ("net/mlx5: Set QP timestamp mode to default")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Link: https://lore.kernel.org/r/32801966eb767c7fd62b8dea3b63991d5fbfe213.1718554199.git.leon@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
drivers/infiniband/hw/mlx4/alias_GUID.c: In function ‘mlx4_ib_init_alias_guid_service’:
drivers/infiniband/hw/mlx4/alias_GUID.c:878:74: error: ‘%d’ directive
output may be truncated writing between 1 and 11 bytes into a region of
size 5 [-Werror=format-truncation=]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:63: note: directive argument in the range [-2147483641, 2147483646]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:17: note: ‘snprintf’ output
between 12 and 22 bytes into a destination of size 15
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: a0c64a17ab ("mlx4: Add alias_guid mechanism")
Link: https://lore.kernel.org/r/1951c9500109ca7e36dcd523f8a5f2d0d2a608d1.1718554641.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Increase size of the name array to avoid truncated output warning.
drivers/infiniband/hw/mlx4/mad.c: In function ‘mlx4_ib_alloc_demux_ctx’:
drivers/infiniband/hw/mlx4/mad.c:2197:47: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 4
[-Werror=format-truncation=]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2197:38: note: directive argument in
the range [-2147483645, 2147483647]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2197:9: note: ‘snprintf’ output between
10 and 20 bytes into a destination of size 12
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2205:38: note: directive argument in
the range [-2147483645, 2147483647]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2213:38: note: directive argument in
the range [-2147483645, 2147483647]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:244: drivers/infiniband/hw/mlx4/mad.o] Error 1
Fixes: fc06573dfa ("IB/mlx4: Initialize SR-IOV IB support for slaves in master context")
Link: https://lore.kernel.org/r/f3798b3ce9a410257d7e1ec7c9e285f1352e256a.1718554569.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On the Lenovo Yoga C630 WOS laptop the EC provides access to the adapter
and battery status. Add the driver to read power supply status on the
laptop.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240621-yoga-ec-driver-v8-1-daae67d0233d@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
subsystems due for the v6.11 merge window.
platform-drivers-x86-ib-lenovo-c630-v6.11-2:
platform-drivers-x86-ib-lenovo-c630-v6.11 +
platform-drivers-x86-lenovo-c630
for merging into the power/supply and USB subsystems for v6.11.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZnmZJwAKCRBZrE9hU+XO
MbzlAQDHlJQrZk3pn13QBVTG4gKhcFb+duafVkzFpxh0ADuDQwEA0IiH/X21CotF
TKGAl6j/nMuRqUTGNYemAb29I/Vcwgk=
=K9/Z
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-ib-lenovo-c630-v6.11-2'
Immutable branch between pdx86 lenovo c630 branch, power/supply and USB
subsystems due for the v6.11 merge window, which is required for the
Lenovo C630 battery driver.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since 45ecaea738 ("drm/sched: Partial revert of 'drm/sched: Keep
s_fence->parent pointer'") still active jobs aren't put back in the
pending list on drm_sched_start(), as they don't have a active
parent fence anymore, so if the GPU is still working and the timeout
is extended, all currently active jobs will be freed.
To avoid prematurely freeing jobs that are still active on the GPU,
don't block the scheduler until we are fully committed to actually
reset the GPU.
As the current job is already removed from the pending list and
will not be put back when drm_sched_start() isn't called, we must
make sure to put the job back on the pending list when extending
the timeout.
Cc: stable@vger.kernel.org #6.0
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
A single IRQ might signal the completion of multiple jobs/fences
at once. There is no point in attaching a new timestamp to each
fence that only differs in when exactly the IRQ handler was able
to process this fence.
Get a single timestamp when the IRQ handler has determined that
there are completed jobs and reuse this for all fences that get
signalled by the handler.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Add check for the return value of drm_cvt_mode() and return the error if
it fails in order to avoid NULL pointer dereference.
Fixes: 1b043677d4 ("drm/qxl: add qxl_add_mode helper function")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621071031.1987974-1-nichen@iscas.ac.cn
The dma sync operation needs to be done with DMA_BIDIRECTIONAL when
the BO is prepared for both read and write operations.
Fixes: a8c21a5451 ("drm/etnaviv: add initial etnaviv DRM driver")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
The etnaviv devcoredump is created in the GPU reset path, which
must make forward progress to avoid stalling memory reclaim on
unsignalled dma fences. The currently used __GFP_NORETRY does not
prohibit sleeping on direct reclaim, breaking the forward progress
guarantee. Switch to GFP_NOWAIT, which allows background reclaim
to be triggered, but avoids any stalls waiting for direct reclaim.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If iio_read_channel_processed() fails, 'val->intval' is not updated, but it
is still *1000 just after. So, in case of error, the *1000 accumulate and
'val->intval' becomes erroneous.
So instead of rescaling the value after the fact, use the dedicated scaling
API. This way the result is updated only when needed. In case of error, the
previous value is kept, unmodified.
This should also reduce any inaccuracies resulting from the scaling.
Finally, this is also slightly more efficient as it saves a function call
and a multiplication.
Fixes: fb24ccfbe1 ("power: supply: add Ingenic JZ47xx battery driver.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://lore.kernel.org/r/51e49c18574003db1e20c9299061a5ecd1661a3c.1719121781.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The KVM RISC-V does not delegate AMO load/store access fault traps to
VS-mode (hedeleg) so typically M-mode takes these traps and redirects
them back to HS-mode. However, upon returning from M-mode, the KVM
RISC-V running in HS-mode terminates VS-mode software.
The KVM RISC-V should redirect AMO load/store access fault traps back
to VS-mode and let the VS-mode trap handler determine the next steps.
Signed-off-by: Yu-Wei Hsu <betterman5240@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240429092113.70695-1-betterman5240@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
'perf kvm stat report/record' generates a statistical analysis of KVM
events and can be used to analyze guest exit reasons.
"report" reports statistical analysis of guest exit events.
To record kvm events on the host:
# perf kvm stat record -a
To report kvm VM EXIT events:
# perf kvm stat report --event=vmexit
Signed-off-by: Shenlin Liang <liangshenlin@eswincomputing.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240422080833.8745-3-liangshenlin@eswincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Like other architectures, RISCV KVM also needs to add these event
tracepoints to count the number of times kvm guest entry/exit.
Signed-off-by: Shenlin Liang <liangshenlin@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240422080833.8745-2-liangshenlin@eswincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
We have common APLIC and IMSIC headers available under
include/linux/irqchip/ directory which are used by APLIC
and IMSIC irqchip drivers. Let us replace the use of
kvm_aia_*.h headers with include/linux/irqchip/riscv-*.h
headers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20240411090639.237119-2-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
There is an useless extra comma at the end of some error messages, remove
them.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/e7ac0fa83c6100cbe4e0efa90cf99291c2423b10.1719037737.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Instead of rescaling current or voltage channels after the fact, use the
dedicated scaling API. This should reduce any inaccuracies resulting from
the scaling.
This is also slightly more efficient as it saves a function call and a
multiplication.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/5668d73b92eb6318c7f094a9a8fa914c909485ca.1719037737.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The ab8500_charger_get_[ac|vbus]_[current|voltage]() functions should
return an error code on error.
Up to now, an un-initialized value is returned.
This makes the error handling of the callers un-reliable.
Return the error code instead, to fix the issue.
Fixes: 97ab78bac5 ("power: supply: ab8500_charger: Convert to IIO ADC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/f9f65642331c9e40aaebb888589db043db80b7eb.1719037737.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- Cleanups and fixes for the Renesas R-Car VSP and VIN drivers
- Miscellaneous cleanups to V4L2 core
-----BEGIN PGP SIGNATURE-----
iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCZnNeLCIcbGF1cmVudC5w
aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95kxyUBAKdQ86lXbVd1
97wtbRDP3H3MTtEowjskDGqhfH0QA9kXAP9eTf7rJixORvXFg/DaLcjdWIyfIsjY
4gz7aHO8MsXGBg==
=BgVa
-----END PGP SIGNATURE-----
Merge tag 'tags/next-media-renesas-20240619' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
- Conversion of max9286 and adv748x to V4L2 subdev active state
- Cleanups and fixes for the Renesas R-Car VSP and VIN drivers
- Miscellaneous cleanups to V4L2 core
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Refine the value and mask define of bit depth for mtk_ovl_set bit_depth().
Use cmdq_pkt_write_mask() instead of cmdq_pkt_write() to avoid bit depth
settings being overwritten.
Fixes: fb36c5020c ("drm/mediatek: Add support for AR30 and BA30 overlays")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240624095726.18818-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Fields flags and res[3] replaced with one 4 byte flags.
Fixes: 4534a70b70 ("fs/ntfs3: Add headers and misc files")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
This involves converting all users of offs_page to offs_folio, but
it's worth it because we get rid of a lot of hidden calls to
compound_head(). We continue to use order-0 folios here, and convert
back to a struct page to call ntfs_bio_pages().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We still use an array of pages for the decompression, but this removes
a few calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The function still takes an array of pages, but use a folio internally.
This function would deadlock against itself if used with large folios
(as it locks each page), so we can be a little sloppy with the conversion
back from folio to page for now.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Nobody checks the error flag on ntfs3 folios, so stop setting and
clearing it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Fetch a folio from the page cache instead of a page and operate on it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[almaz.alexandrovich@paragon-software.com: skip using folio_end_read]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Now that both callers of attr_data_write_resident() have a folio, pass
it in and use memcpy_from_folio() to handle all the gnarly highmem
multi-page problems.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Convert the passed page back into a folio and use the folio APIs, saving
a few hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Now that all three callers have a folio, pass it in and use
folio_fill_tail() to do the hard work of filling the folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Retrieve a folio from the page cache instead of a precise page.
This function is now large folio safe, but its called function is not.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Remove the struct page conversion, and use a folio throughout. We still
convert back to a struct page for calling some internal functions,
but those will change soon.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
CHECK /home/andy/prj/linux-topic-uart/fs/ntfs3/super.c
fs/ntfs3/super.c:471:23: warning: unknown escape sequence: '\%'
Drop stray '\' (backslash) in formatting string.
Fixes: d27e202b9a ("fs/ntfs3: Add more info into /proc/fs/ntfs3/<dev>/volinfo")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Added out-of-bound checking for *ane (ATTR_NAME_ENTRY).
Reported-by: lei lu <llfamsec@gmail.com>
Fixes: 865e7a7700 ("fs/ntfs3: Reduce stack usage")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
This adds sanity checks for ff offset. There is a check
on rt->first_free at first, but walking through by ff
without any check. If the second ff is a large offset.
We may encounter an out-of-bound read.
Signed-off-by: lei lu <llfamsec@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Clusters allocated for Extended Attributes, must be freed
when rolling back inode creation.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The issue was detected due to xfstest 465 failing.
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
If the offset is equal to or greater than the end of
file, an error is returned. For such operations (i.e., inserting
a hole at the end of file), ftruncate(2) should be used.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Fix netfs_page_mkwrite() to check that folio->mapping is valid once it has
taken the folio lock (as filemap_page_mkwrite() does). Without this,
generic/247 occasionally oopses with something like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:trace_event_raw_event_netfs_folio+0x61/0xc0
...
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x6e/0xa0
? exc_page_fault+0xc2/0xe0
? asm_exc_page_fault+0x22/0x30
? trace_event_raw_event_netfs_folio+0x61/0xc0
trace_netfs_folio+0x39/0x40
netfs_page_mkwrite+0x14c/0x1d0
do_page_mkwrite+0x50/0x90
do_pte_missing+0x184/0x200
__handle_mm_fault+0x42d/0x500
handle_mm_fault+0x121/0x1f0
do_user_addr_fault+0x23e/0x3c0
exc_page_fault+0xc2/0xe0
asm_exc_page_fault+0x22/0x30
This is due to the invalidate_inode_pages2_range() issued at the end of the
DIO write interfering with the mmap'd writes.
Fixes: 102a7e2c59 ("netfs: Allow buffered shared-writeable mmap through netfs_page_mkwrite()")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/780211.1719318546@warthog.procyon.org.uk
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Delete some xarray-based buffer wangling functions that are intended for
use with bounce buffering, but aren't used because bounce-buffering got
deferred to a later patch series. Now, however, the intention is to use
something other than an xarray to do this.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240620173137.610345-9-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
During the writeback procedure, at the end of netfs_write_folio(), pending
write operations are flushed if the amount of write-streaming data stored
in a page is less than the size of the folio because if we haven't modified
a folio to the end, it cannot be contiguous with the following folio...
except if the dirty region of the folio is right at the end of the folio
space.
Fix the test to take the offset into the folio into account as well, such
that if the dirty region runs right up to the end of the folio, we leave
the flushing for later.
Fixes: 288ace2f57 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com> (DFS, global name space)
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240620173137.610345-4-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
