Other u64 registers are printed in a single line so RING_START
needs to follow that too.
As there is no upstream decoder tool parsing RING_START this will
not break any decoder application.
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510150108.80679-1-jose.souza@intel.com
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings via
prctl, notably NPHIE which controls hashst/hashchk for ROP protection.
- Install powerpc selftests in sub-directories. Note this changes the way
run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove events.
- Other small features, cleanups and fixes.
Thanks to: Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann,
Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe Jaillet, Christophe
Leroy, Colin Ian King, Cédric Le Goater, Dr. David Alan Gilbert, Erhard Furtner,
Frank Li, GUO Zihua, Ganesh Goudar, Geoff Levand, Ghanshyam Agrawal, Greg Kurz,
Hari Bathini, Joel Stanley, Justin Stitt, Kunwu Chan, Li Yang, Lidong Zhong,
Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Matthias Schiffer,
Naresh Kamboju, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas
Miehlbradt, Ran Wang, Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta,
Shrikanth Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, Zhao Chenhui.
-----BEGIN PGP SIGNATURE-----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=GoCV
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
- Updates to AMBA bus subsystem to drop .owner struct device_driver
initialisations, moving that to code instead.
- Add LPAE privileged-access-never support
- Add support for Clang CFI
- clkdev: report over-sized device or connection strings
-----BEGIN PGP SIGNATURE-----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=t/xl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- Updates to AMBA bus subsystem to drop .owner struct device_driver
initialisations, moving that to code instead.
- Add LPAE privileged-access-never support
- Add support for Clang CFI
- clkdev: report over-sized device or connection strings
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: (36 commits)
ARM: 9398/1: Fix userspace enter on LPAE with CC_OPTIMIZE_FOR_SIZE=y
clkdev: report over-sized strings when creating clkdev entries
ARM: 9393/1: mm: Use conditionals for CFI branches
ARM: 9392/2: Support CLANG CFI
ARM: 9391/2: hw_breakpoint: Handle CFI breakpoints
ARM: 9390/2: lib: Annotate loop delay instructions for CFI
ARM: 9389/2: mm: Define prototypes for all per-processor calls
ARM: 9388/2: mm: Type-annotate all per-processor assembly routines
ARM: 9387/2: mm: Rewrite cacheflush vtables in CFI safe C
ARM: 9386/2: mm: Use symbol alias for cache functions
ARM: 9385/2: mm: Type-annotate all cache assembly routines
ARM: 9384/2: mm: Make tlbflush routines CFI safe
ARM: 9382/1: ftrace: Define ftrace_stub_graph
ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement
ARM: 9357/2: Reduce the number of #ifdef CONFIG_CPU_SW_DOMAIN_PAN
ARM: 9356/2: Move asm statements accessing TTBCR into C functions
ARM: 9355/2: Add TTBCR_* definitions to pgtable-3level-hwdef.h
ARM: 9379/1: coresight: tpda: drop owner assignment
ARM: 9378/1: coresight: etm4x: drop owner assignment
ARM: 9377/1: hwrng: nomadik: drop owner assignment
...
for_each_sibling_event() checks leader's ctx but it doesn't have the ctx
yet if it's the leader. Like in perf_event_validate_size(), we should
skip checking siblings in that case.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Fixes: f3c0eba287 ("perf: Add a few assertions")
Reported-by: Greg Thelen <gthelen@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20240514180050.182454-1-namhyung@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit a46c27026d ("blk-mq: don't schedule block kworker on isolated CPUs")
rules out isolated CPUs from hctx->cpumask, and hctx->cpumask should only be
used for scheduling kworker.
Add helper blk_mq_cpu_mapped_to_hctx() and apply it into cpuhp handlers.
This patch avoids to forget clearing INACTIVE of hctx state in case that one
isolated CPU becomes online, and fixes hang issue when allocating request
from this hctx's tags.
Cc: Raju Cheerla <rcheerla@redhat.com>
Fixes: a46c27026d ("blk-mq: don't schedule block kworker on isolated CPUs")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240517020514.149771-1-ming.lei@redhat.com
Tested-by: Raju Cheerla <rcheerla@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This code calls folio_put() on an error pointer which will lead to a
crash. Check for both error pointers and NULL pointers before calling
folio_put().
Fixes: 5eea586b47 ("ext4: convert bd_buddy_page to bd_buddy_folio")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/eaafa1d9-a61c-4af4-9f97-d3ad72c60200@moroto.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The modeset lock protects the DDC code from concurrent modeset
operations, which use the same registers. Move that code from the
connector helpers into the DDC helpers .pre_xfer() and .post_xfer().
Both, .pre_xfer() and .post_xfer(), enclose the transfer of data blocks
over the I2C channel in the internal I2C function bit_xfer(). Both
calls are executed unconditionally if present. Invoking DDC transfers
from any where within the driver now takes the lock.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-10-tzimmermann@suse.de
Align the names of the algo-bit helpers with mgag200's convention of
using an mgag200 prefix plus the struct's name plus the callback's name
for such function symbols.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-9-tzimmermann@suse.de
Rename struct mga_i2c_chan to struct mgag200_ddc, define it in the
source file mgag200_i2c.c, and reorder its fields. Rename all related
variables from i2c to ddc. Also rename the i2c adapter accordingly.
Using the term 'ddc' documents the purpose of the code clearly. The
old term 'i2c' could refer to any functionality on an i2c bus. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-7-tzimmermann@suse.de
The function mgag200_i2c_init() is an internal helper that sets
up the i2c data structure. Inline its code into the only caller.
Rearrange the individual steps to separate among i2c algorithm,
adapter and fields in struct mga_i2c_chan.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-6-tzimmermann@suse.de
Allocate instances of struct mga_i2c_chan in mgag200_ddc_create()
and return a pointer to the contained i2c adapter. The callers of
the function are now independent from struct mga_i2c_chan.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-5-tzimmermann@suse.de
Managed cleanup with devm_add_action_or_reset() will release the I2C
adapter when the underlying Linux device goes away. But the connector
still refers to it, so this cleanup leaves behind a stale pointer
in struct drm_connector.ddc.
Bind the lifetime of the I2C adapter to the connector's lifetime by
using DRM's managed release. When the DRM device goes away (after
the Linux device) DRM will first clean up the connector and then
clean up the I2C adapter.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: b279df2429 ("drm/mgag200: Switch I2C code to managed cleanup")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.0+
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-3-tzimmermann@suse.de
Compute the i2c timeout in jiffies from a value in milliseconds. The
original values of 2 jiffies equals 2 milliseconds if HZ has been
configured to a value of 1000. This corresponds to 2.2 milliseconds
used by most other DRM drivers. Update mgag200 accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 414c453106 ("mgag200: initial g200se driver (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-2-tzimmermann@suse.de
The legacy decompressor has elaborate logic to ensure that the
randomized physical placement of the decompressed kernel image does not
conflict with any memory reservations, including ones specified on the
command line using mem=, memmap=, efi_fake_mem= or hugepages=, which are
taken into account by the kernel proper at a later stage.
When booting in EFI mode, it is the firmware's job to ensure that the
chosen range does not conflict with any memory reservations that it
knows about, and this is trivially achieved by using the firmware's
memory allocation APIs.
That leaves reservations specified on the command line, though, which
the firmware knows nothing about, as these regions have no other special
significance to the platform. Since commit
a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
these reservations are not taken into account when randomizing the
physical placement, which may result in conflicts where the memory
cannot be reserved by the kernel proper because its own executable image
resides there.
To avoid having to duplicate or reuse the existing complicated logic,
disable physical KASLR entirely when such overrides are specified. These
are mostly diagnostic tools or niche features, and physical KASLR (as
opposed to virtual KASLR, which is much more important as it affects the
memory addresses observed by code executing in the kernel) is something
we can live without.
Closes: https://lkml.kernel.org/r/FA5F6719-8824-4B04-803E-82990E65E627%40akamai.com
Reported-by: Ben Chaney <bchaney@akamai.com>
Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Yi notes relative to commit f6944d4a0b ("vfio/pci: Collect hot-reset
devices to local buffer") that we previously tested the resulting
device count with a WARN_ON, which was removed when we switched to
the in-loop user copy in commit b56b7aabcf ("vfio/pci: Copy hot-reset
device info to userspace in the devices loop"). Finding no devices in
the bus/slot would be an unexpected condition, so let's restore the
warning and trigger a -ERANGE error here as success with no devices
would be an unexpected result to userspace as well.
Suggested-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20240516174831.2257970-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit 8d4ba9fc1c ("drm/i915/selftests: Pick correct caching mode.")
was not complete as for non LLC sharing platforms cpu read can happen
from LLC which probably doesn't have the latest changes made by GPU.
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Fixes: 8d4ba9fc1c ("drm/i915/selftests: Pick correct caching mode.")
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516151403.2875-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
This reverts commit 2632e25217.
Johannes (and others) report data corruption with dm-crypt on Apple M1
which has been bisected to this change. Revert the offending commit
while we figure out what's going on.
Cc: stable@vger.kernel.org
Reported-by: Johannes Nixdorf <mixi@shadowice.org>
Link: https://lore.kernel.org/all/D1B7GPIR9K1E.5JFV37G0YTIF@shadowice.org/
Signed-off-by: Will Deacon <will@kernel.org>
- Fix required_opp_tables for multiple genpds using same table (Viresh
Kumar).
-----BEGIN PGP SIGNATURE-----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=+eou
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp
Merge OPP updates for v6.10 from Viresh Kumar:
"- Fix required_opp_tables for multiple genpds using same table (Viresh
Kumar)."
* tag 'opp-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Fix required_opp_tables for multiple genpds using same table
Gives the wrong impression that min page-size has to be tied to the CPU
PAGE_SIZE.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229105112.250077-4-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The drm_buddy minimum page-size requirements should be distinct from the
CPU PAGE_SIZE. Only restriction is that the minimum page-size is at
least 4K.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229105112.250077-3-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Prevent ecc_digits_from_bytes from reading too many bytes from the input
byte array in case an insufficient number of bytes is provided to fill the
output digit array of ndigits. Therefore, initialize the most significant
digits with 0 to avoid trying to read too many bytes later on. Convert the
function into a regular function since it is getting too big for an inline
function.
If too many bytes are provided on the input byte array the extra bytes
are ignored since the input variable 'ndigits' limits the number of digits
that will be filled.
Fixes: d67c96fb97 ("crypto: ecdsa - Convert byte arrays with key coordinates to digits")
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using completion_done to determine whether the caller has gone
away only works after a complete call. Furthermore it's still
possible that the caller has not yet called wait_for_completion,
resulting in another potential UAF.
Fix this by making the caller use cancel_work_sync and then freeing
the memory safely.
Fixes: 7d42e09760 ("crypto: qat - resolve race condition during AER recovery")
Cc: <stable@vger.kernel.org> #6.8+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 9ad18043fb ("thermal: core: Send trip crossing notifications
at init time if needed") overlooked the case when a trip point that
has started as invalid is set to a valid temperature later. Namely,
the initial threshold value for all trips is zero, so if a previously
invalid trip becomes valid and its (new) low temperature is above the
zone temperature, a spurious trip crossing notification will occur and
it may trigger the WARN_ON() in handle_thermal_trip().
To address this, set the initial threshold for all trips to INT_MAX.
There is also the case when a valid writable trip becomes invalid that
requires special handling. First, in accordance with the change
mentioned above, the trip's threshold needs to be set to INT_MAX to
avoid the same issue. Second, if the trip in question is passive and
it has been crossed by the thermal zone temperature on the way up, the
zone's passive count has been incremented and it is in the passive
polling mode, so its passive count needs to be adjusted to allow the
passive polling to be turned off eventually.
Fixes: 9ad18043fb ("thermal: core: Send trip crossing notifications at init time if needed")
Fixes: 042a3d80f1 ("thermal: core: Move passive polling management to the core")
Reported-by: Zhang Rui <zhang.rui@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
The required_opp_tables parsing is not perfect, as the OPP core does the
parsing solely based on the DT node pointers.
The core sets the required_opp_tables entry to the first OPP table in
the "opp_tables" list, that matches with the node pointer.
If the target DT OPP table is used by multiple devices and they all
create separate instances of 'struct opp_table' from it, then it is
possible that the required_opp_tables entry may be set to the incorrect
sibling device.
Unfortunately, there is no clear way to initialize the right values
during the initial parsing and we need to do this at a later point of
time.
Cross check the OPP table again while the genpds are attached and fix
them if required.
Also add a new API for the genpd core to fetch the device pointer for
the genpd.
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Reported-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218682
Co-developed-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240508152658.1445809-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit 262fc47ac1 ('xen/balloon: don't use PV mode extra memory for zone
device allocations') removed the addition of the extra memory ranges to the
unpopulated range allocator, using those only for the balloon driver.
This forces the unpopulated allocator to attach hotplug ranges even when spare
memory (as part of the extra memory ranges) is available. Furthermore, on PVH
domains it defeats the purpose of commit 38620fc4e8 ('x86/xen: attempt to
inflate the memory balloon on PVH'), as extra memory ranges would only be
used to map foreign memory if the kernel is built without XEN_UNPOPULATED_ALLOC
support.
Fix this by adding a helpers that adds the extra memory ranges to the list of
unpopulated pages, and zeroes the ranges so they are not also consumed by the
balloon driver.
This should have been part of 38620fc4e8, hence the fixes tag.
Note the current logic relies on unpopulated_init() (and hence
arch_xen_unpopulated_init()) always being called ahead of balloon_init(), so
that the extra memory regions are consumed by arch_xen_unpopulated_init().
Fixes: 38620fc4e8 ('x86/xen: attempt to inflate the memory balloon on PVH')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240429155053.72509-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Use try_cmpxchg() instead of cmpxchg(*ptr, old, new) == old.
The x86 CMPXCHG instruction returns success in the ZF flag,
so this change saves a compare after CMPXCHG.
Also, try_cmpxchg() implicitly assigns old *ptr value to "old"
when CMPXCHG fails. There is no need to explicitly assign
old *ptr value to the temporary, which can simplify the
surrounding source code.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20240405083335.507471-1-ubizjak@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Jiawen Wu says:
====================
Wangxun fixes
Fixed some bugs when using ethtool to operate network devices.
v4 -> v5:
- Simplify if...else... to fix features.
v3 -> v4:
- Require both ctag and stag to be enabled or disabled.
v2 -> v3:
- Drop the first patch.
v1 -> v2:
- Factor out the same code.
- Remove statistics printing with more than 64 queues.
- Detail the commit logs to describe issues.
- Remove reset flag check in wx_update_stats().
- Change to set VLAN CTAG and STAG to be consistent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When VLAN tag strip is changed to enable or disable, the hardware requires
the Rx ring to be in a disabled state, otherwise the feature cannot be
changed.
Fixes: f3b03c655f ("net: wangxun: Implement vlan add and kill functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware requires VLAN CTAG and STAG configuration always matches. And
whether VLAN CTAG or STAG changes, the configuration needs to be changed
as well.
Fixes: 6670f1ece2 ("net: txgbe: Add netdev features support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the issue where some Rx features cannot be changed.
When using ethtool -K to turn off rx offload, it returns error and
displays "Could not change any device features". And netdev->features
is not assigned a new value to actually configure the hardware.
Fixes: 6dbedcffcf ("net: libwx: Implement xx_set_features ops")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
sparse warns about a large memset() call within
zcrypt_device_status_mask_ext():
drivers/s390/crypto/zcrypt_api.c:1303:15: warning: memset with byte count of 262144
Get rid of this warning by making sure that all callers of this function
allocate memory with __GFP_ZERO, which zeroes memory already at allocation
time, which again allows to remove the memset() call.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When changing the interface type we also need to update the bss_num, the
driver private data is searched based on a unique (bss_type, bss_num)
tuple, therefore every time bss_type changes, bss_num must also change.
This fixes for example an issue in which, after the mode changed, a
wireless scan on the changed interface would not finish, leading to
repeated -EBUSY messages to userspace when other scan requests were
sent.
Fixes: c606008b70 ("mwifiex: Properly initialize private structure on interface type changes")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240510110458.15475-1-francesco@dolcini.it
The default netdev interface exposed by WILC1000 is registered at probe,
but the chip mac address is not known until ndo_open, which will load and
start chip firmware and then retrieve stored MAC address from it. As a
consequence, the interface has uninitialized value (00:00:00:00:00) until a
user brings up the interface.
Fix MAC address at probe by setting the following steps:
- at probe, read MAC address directly from fuse
- whenever a new netdevice is created, apply saved mac address (which can
be a user-provided address, or the eFuse Mac address if no address has
been passed by user)
- whenever an interface is brought up for the first time (and so the
firmware is loaded and started), enforce netdevice mac address to the
chip (in case user has changed it)
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Closes: https://lore.kernel.org/netdev/CAEyMn7aV-B4OEhHR4Ad0LM3sKCz1-nDqSb9uZNmRWR-hMZ=z+A@mail.gmail.com/T/
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-6-afef09f1cd10@bootlin.com
In order to be able to read raw registers (eg the nv mac address) in
wilc1000 during probe before the firmware is loaded and running, we need to
run the basic sdio functions initialization, but then we also need to
properly deinitialize those right after, to preserve the current driver
behavior (keeping the chip idle/unconfigured until the corresponding
interface is brought up). Calling wilc_sdio_deinit in its current form is
not enough because it merely resets an internal flag.
Implement a deinit sequence which symmetrically reset all steps performed
in wilc_sdio_init (only for parts activating/deactivating features, for the
sake of simplicity, let's ignore blocks size configuration reset)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-5-afef09f1cd10@bootlin.com
wilc driver currently reads and sets mac address by firmware calls. It
means that we can not access mac address if no interface has been brought
up (so firmware is up and running). Another way to get mac address is to
read it directly from eFUSE.
Add a function helper to read the mac address written in eFuse, without
firmware assistance
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-4-afef09f1cd10@bootlin.com
Any attempt to provide a const mac address to wilc_set_mac_address results
in the following warning:
warning: passing argument 2 of 'wilc_set_mac_address' discards 'const'
qualifier from pointer target type [-Wdiscarded-qualifiers]
[...]
drivers/net/wireless/microchip/wilc1000/hif.h:170:52: note: expected 'u8 *'
{aka 'unsigned char *'} but argument is of type 'const unsigned char *'a
int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr);
Instead of using an explicit cast each time we need provide a MAC address,
set the function parameter as const
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-3-afef09f1cd10@bootlin.com
SDIO/SPI probes functions automatically add a default wlan interface on top
of registered wiphy, through wilc_cfg80211_init which in turn calls
wilc_netdev_ifc_init. However, bus is still not fully initialized when we
register corresponding net device (for example we still miss some private
driver data pointers), which for example makes it impossible to
retrieve MAC address from chip (which is supposed to be set on net device
before its registration) before registering net device. More generally, net
device registration should not be done until driver has fully initialized
everything and is ready to handle any operation on the net device.
Prevent net device from being registered so early by doing it at the end of
probe functions. Apply this logic to both sdio and spi buses.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-2-afef09f1cd10@bootlin.com
net device registration is currently done in wilc_netdev_ifc_init but
other initialization operations are still done after this registration.
Since net device is assumed to be usable right after registration, it
should be the very last step of initialization.
Move netdev registration at the very end of wilc_netdev_ifc_init to let
this function completely initialize netdevice before registering it.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-1-afef09f1cd10@bootlin.com
In the cgroup v2 CPU subsystem, assuming we have a
cgroup named 'test', and we set cpu.max and cpu.max.burst:
# echo 1000000 > /sys/fs/cgroup/test/cpu.max
# echo 1000000 > /sys/fs/cgroup/test/cpu.max.burst
then we check cpu.max and cpu.max.burst:
# cat /sys/fs/cgroup/test/cpu.max
1000000 100000
# cat /sys/fs/cgroup/test/cpu.max.burst
1000000
Next we set cpu.max again and check cpu.max and
cpu.max.burst:
# echo 2000000 > /sys/fs/cgroup/test/cpu.max
# cat /sys/fs/cgroup/test/cpu.max
2000000 100000
# cat /sys/fs/cgroup/test/cpu.max.burst
1000
... we find that the cpu.max.burst value changed unexpectedly.
In cpu_max_write(), the unit of the burst value returned
by tg_get_cfs_burst() is microseconds, while in cpu_max_write(),
the burst unit used for calculation should be nanoseconds,
which leads to the bug.
To fix it, get the burst value directly from tg->cfs_bandwidth.burst.
Fixes: f4183717b3 ("sched/fair: Introduce the burstable CFS controller")
Reported-by: Qixin Liao <liaoqixin@huawei.com>
Signed-off-by: Cheng Yu <serein.chengyu@huawei.com>
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240424132438.514720-1-serein.chengyu@huawei.com
On 05/03/2024 15:05, Vincent Guittot wrote:
I'm fine with either and that was my first thought here, too, but it did seem like
the comment was mostly placed there to justify the 'unexpected' high utilization
when explicitly passing FREQUENCY_UTIL and the need to clamp it then.
So removing did feel slightly more natural to me anyway.
So alternatively:
From: Christian Loehle <christian.loehle@arm.com>
Date: Tue, 5 Mar 2024 09:34:41 +0000
Subject: [PATCH] sched/fair: Remove stale FREQUENCY_UTIL mention
effective_cpu_util() flags were removed, so remove mentioning of the
flag.
commit 9c0b4bb7f6 ("sched/cpufreq: Rework schedutil governor performance estimation")
reworked effective_cpu_util() removing enum cpu_util_type. Modify the
comment accordingly.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/0e2833ee-0939-44e0-82a2-520a585a0153@arm.com
Change se->load.weight to se_weight(se) in the calculation for the
initial util_avg to avoid unnecessarily inflating the util_avg by 1024
times.
The reason is that se->load.weight has the unit/scale as the scaled-up
load, while cfs_rg->avg.load_avg has the unit/scale as the true task
weight (as mapped directly from the task's nice/priority value). With
CONFIG_32BIT, the scaled-up load is equal to the true task weight. With
CONFIG_64BIT, the scaled-up load is 1024 times the true task weight.
Thus, the current code may inflate the util_avg by 1024 times. The
follow-up capping will not allow the util_avg value to go wild. But the
calculation should have the correct logic.
Signed-off-by: Dawei Li <daweilics@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Vishal Chourasia <vishalc@linux.ibm.com>
Link: https://lore.kernel.org/r/20240315015916.21545-1-daweilics@gmail.com
Add a clarification that domain levels are system-specific
and where to check for system details.
Signed-off-by: Vitalii Bursov <vitaly@bursov.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/42b177a2e897cdf880caf9c2025f5b609e820334.1714488502.git.vitaly@bursov.com
Knowing domain's level exactly can be useful when setting
relax_domain_level or cpuset.sched_relax_domain_level
Usage:
cat /debug/sched/domains/cpu0/domain1/level
to dump cpu0 domain1's level.
SDM macro is not used because sd->level is 'int' and
it would hide the type mismatch between 'int' and 'u32'.
Signed-off-by: Vitalii Bursov <vitaly@bursov.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/9489b6475f6dd6fbc67c617752d4216fa094da53.1714488502.git.vitaly@bursov.com
Change relax_domain_level checks so that it would be possible
to include or exclude all domains from newidle balancing.
This matches the behavior described in the documentation:
-1 no request. use system default or follow request of others.
0 no search.
1 search siblings (hyperthreads in a core).
"2" enables levels 0 and 1, level_max excludes the last (level_max)
level, and level_max+1 includes all levels.
Fixes: 1d3504fcf5 ("sched, cpuset: customize sched domains, core")
Signed-off-by: Vitalii Bursov <vitaly@bursov.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/bd6de28e80073c79466ec6401cdeae78f0d4423d.1714488502.git.vitaly@bursov.com
Commit in Fixes moved the optimize_nops() call inside apply_relocation()
and made it a second optimization pass after the relocations have been
done.
Since optimize_nops() works only on NOPs, that is fine and it'll simply
jump over instructions which are not NOPs.
However, it made that call with repl_len as the buffer length to
optimize.
However, it can happen that there are alternatives calls like this one:
alternative("mfence; lfence", "", ALT_NOT(X86_FEATURE_APIC_MSRS_FENCE));
where the replacement length is 0. And using repl_len is wrong because
apply_alternatives() expands the buffer size to the length of the source
insn that is being patched, by padding it with one-byte NOPs:
for (; insn_buff_sz < a->instrlen; insn_buff_sz++)
insn_buff[insn_buff_sz] = 0x90;
Long story short: pass the length of the original instruction(s) as the
length of the temporary buffer which to optimize.
Result:
SMP alternatives: feat: 11*32+27, old: (lapic_next_deadline+0x9/0x50 (ffffffff81061829) len: 6), repl: (ffffffff89b1cc60, len: 0) flags: 0x1
SMP alternatives: ffffffff81061829: old_insn: 0f ae f0 0f ae e8
SMP alternatives: ffffffff81061829: final_insn: 90 90 90 90 90 90
=>
SMP alternatives: feat: 11*32+27, old: (lapic_next_deadline+0x9/0x50 (ffffffff81061839) len: 6), repl: (ffffffff89b1cc60, len: 0) flags: 0x1
SMP alternatives: ffffffff81061839: [0:6) optimized NOPs: 66 0f 1f 44 00 00
SMP alternatives: ffffffff81061839: old_insn: 0f ae f0 0f ae e8
SMP alternatives: ffffffff81061839: final_insn: 66 0f 1f 44 00 00
Fixes: da8f9cf7e7 ("x86/alternatives: Get rid of __optimize_nops()")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240515104804.32004-1-bp@kernel.org
