A few lines earlier pcim_enable_device() is called, which includes the
functionality of pci_enable_device_io(). Therefore we can safely remove the
call to pci_enable_device_io().
Link: https://lore.kernel.org/r/5068d0ce-2140-4d3f-b305-e8f0d61eed1f@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
f646c2a0a6 ("PCI: Return u8 from pci_find_capability() and similar") and
ee8b1c478a ("PCI: Return u16 from pci_find_ext_capability() and similar")
updated the return type of the extern declarations, but neglected to update
the type of the stubs used when CONFIG_PCI is not enabled.
Update them to match the extern declarations.
Link: https://lore.kernel.org/r/20240327180234.1529164-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Replace the last references to PCI_IRQ_LEGACY with PCI_IRQ_INTX in pci.h
header file. With this change, PCI_IRQ_LEGACY is unused and we can remove
its definition.
Link: https://lore.kernel.org/r/20240325070944.3600338-29-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In pvscsi_probe(), initialize irq_flag using PCI_IRQ_ALL_TYPES to remove
the use of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-28-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-27-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-26-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-25-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-24-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-23-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-22-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-21-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
For debug purposes we might want to view actual VF configuration
(including GGTT range, LMEM size, number of GuC contexts IDs or
doorbells) and the negotiated ABI versions (with GuC and PF).
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-7-michal.wajdeczko@intel.com
The VF drivers may immediately communicate with the GuC to obtain
the hardware config since the firmware shall already be running.
With the GuC communication established, VFs can also obtain the
values of the runtime registers (fuses) from the PF driver.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-6-michal.wajdeczko@intel.com
The VF driver doesn't know which GuC firmware was loaded by the PF
driver and must perform GuC ABI version handshake prior to sending
any other H2G actions to the GuC to submit workloads.
The VF driver also doesn't have access to the fuse registers and
must rely on the runtime info, which includes values of the fuse
registers, that the PF driver is exposing to the VFs.
Add functions to cover that functionality. We will use these
functions in upcoming patches.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-5-michal.wajdeczko@intel.com
In upcoming patches we will add support to the VF driver to
read its configuration from the GuC using special H2G actions.
Add necessary definitions to our GuC firmware ABI header.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-4-michal.wajdeczko@intel.com
The version negotiation between the VF driver and the GuC firmware
must start with explicit soft reset of the GuC state initiated by
the VF driver. Add VF2GUC action definitions to the ABI header.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-3-michal.wajdeczko@intel.com
In upcoming patches we will add a version negotiation between
the VF driver and the GuC firmware. Add necessary definitions
to our GuC firmware ABI header.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-2-michal.wajdeczko@intel.com
Turn the etnaviv_is_model_rev() macro into a static inline function.
Use the raw model number as a parameter instead of the chipModel_GCxxxx
defines. This reduces synchronization requirements for the generated
headers. For newer hardware, the GCxxxx names are not the correct model
names anyway. For example, model 0x8000 NPUs are called VIPNano-QI/SI(+)
by VeriSilicon.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Update the state HI header from the rnndb commit
8d7ee714cfe2 ("Merge pull request #24 from pH5/unknown-3950").
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The custom EC address space handler in the WMI driver was only needed
because the EC driver did not install its address space handler for
EC operation regions beyond the EC device scope in the ACPI namespace.
That has just changed, so the custom EC address handler is not needed
any more and it can be removed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It is reported that _DSM evaluation fails in ucsi_acpi_dsm() on Lenovo
IdeaPad Pro 5 due to a missing address space handler for the EC address
space:
ACPI Error: No handler for Region [ECSI] (000000007b8176ee) [EmbeddedControl] (20230628/evregion-130)
This happens because if there is no ECDT, the EC driver only registers
the EC address space handler for operation regions defined in the EC
device scope of the ACPI namespace while the operation region being
accessed by the _DSM in question is located beyond that scope.
To address this, modify the ACPI EC driver to install the EC address
space handler at the root of the ACPI namespace for the first EC that
can be found regardless of whether or not an ECDT is present.
Note that this change is consistent with some examples in the ACPI
specification in which EC operation regions located outside the EC
device scope are used (for example, see Section 9.17.15 in ACPI 6.5),
so the current behavior of the EC driver is arguably questionable.
Reported-by: webcaptcha <webcapcha@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218789
Link: https://uefi.org/specs/ACPI/6.5/09_ACPI_Defined_Devices_and_Device_Specific_Objects.html#example-asl-code
Link: https://lore.kernel.org/linux-acpi/Zi+0whTvDbAdveHq@kuha.fi.intel.com
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
With gcc-7 and earlier, there are lots of warnings like
In file included from <command-line>:0:0:
In function '__guc_context_policy_add_priority.isra.66',
inlined from '__guc_context_set_prio.isra.67' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3292:3,
inlined from 'guc_context_set_prio' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3320:2:
include/linux/compiler_types.h:399:38: error: call to '__compiletime_assert_631' declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
...
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:2422:3: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(GUC_KLV_0_KEY, GUC_CONTEXT_POLICIES_KLV_ID_##id) | \
^~~~~~~~~~
Make sure that GUC_KLV_0_KEY is an unsigned value to avoid the warning.
Fixes: 77b6f79df6 ("drm/i915/guc: Update to GuC version 69.0.3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430164809.482131-1-julia.filipchuk@intel.com
Highlights:
- New drivers/platform/arm64 directory for arm64 embedded-controller drivers
- New drivers for:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight support
- Miscellaneous cleanups / fixes / improvements
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: add platform_profile_cycle()
Add ACPI quickstart button (PNP0C32) driver:
- Add ACPI quickstart button (PNP0C32) driver
Add lenovo-yoga-tab2-pro-1380-fastcharger driver:
- Add lenovo-yoga-tab2-pro-1380-fastcharger driver
Add new Dell UART backlight driver:
- Add new Dell UART backlight driver
Add lenovo WMI camera button driver:
- Add lenovo WMI camera button driver
Add new MeeGoPad ANX7428 Type-C Cross Switch driver:
- Add new MeeGoPad ANX7428 Type-C Cross Switch driver
ISST:
- Support SST-BF and SST-TF per level
- Add missing MODULE_DESCRIPTION
- Add dev_fmt
- Use in_range() to check package ID validity
- Support partitioned systems
- Shorten the assignments for power_domain_info
- Use local variable for auxdev->dev
MAINTAINERS:
- drop Daniel Oliveira Nascimento
arm64:
- dts: qcom: acer-aspire1: Add embedded controller
asus-laptop:
- Use sysfs_emit() and sysfs_emit_at() to replace sprintf()
asus-wmi:
- cleanup main struct to avoid some holes
- Add support for MCU powersave
- ROG Ally increase wait time, allow MCU powersave
- adjust formatting of ppt-<name>() functions
- store a min default for ppt options
- support toggling POST sound
- add support variant of TUF RGB
- add support for Vivobook GPU MUX
- add support for 2024 ROG Mini-LED
- use sysfs_emit() instead of sprintf()
classmate-laptop:
- Add missing MODULE_DESCRIPTION()
devm-helpers:
- Fix a misspelled cancellation in the comments
dt-bindings:
- leds: Add LED_FUNCTION_FNLOCK
- platform: Add Acer Aspire 1 EC
hp-wmi:
- use sysfs_emit() instead of sprintf()
huawei-wmi:
- use sysfs_emit() instead of sprintf()
ideapad-laptop:
- switch platform profiles using thermal management key
- add FnLock LED class device
- add fn_lock_get/set functions
intel-vbtn:
- Log event code on unexpected button events
intel/pmc:
- Enable S0ix blocker show in Lunar Lake
- Add support to show S0ix blocker counter
- Update LNL signal status map
msi-laptop:
- Use sysfs_emit() to replace sprintf()
p2sb:
- Don't init until unassigned resources have been assigned
- Make p2sb_get_devfn() return void
platform:
- arm64: Add Acer Aspire 1 embedded controller driver
- Add ARM64 platform directory
platform/surface:
- aggregator: Log critical errors during SAM probing
- aggregator_registry: Add support for thermal sensors on the Surface Pro 9
- platform_profile: add fan profile switching
platform/x86/amd:
- pmc: Add new ACPI ID AMDI000B
- pmf: Add new ACPI ID AMDI0105
platform/x86/amd/hsmp:
- switch to use device_add_groups()
platform/x86/amd/pmc:
- Fix implicit declaration error on i386
- Add AMD MP2 STB functionality
platform/x86/fujitsu-laptop:
- Replace sprintf() with sysfs_emit()
platform/x86/intel-uncore-freq:
- Don't present root domain on error
platform/x86/intel/ifs:
- Disable irq during one load stage
- trace: display batch num in hex
- Classify error scenarios correctly
platform/x86/intel/pmc:
- Fix PCH names in comments
platform/x86/intel/sdsi:
- Add attribute to read the current meter state
- Add in-band BIOS lock support
- Combine read and write mailbox flows
- Set message size during writes
platform/x86/intel/tpmi:
- Add additional TPMI header fields
- Align comments in kernel-doc
- Check major version change for TPMI Information
- Handle error from tpmi_process_info()
quickstart:
- Fix race condition when reporting input event
- fix Kconfig selects
- Miscellaneous improvements
samsung-laptop:
- Use sysfs_emit() to replace the old interface sprintf()
think-lmi:
- Convert container_of() macros to static inline
thinkpad_acpi:
- Use false to set acpi_send_ev to false
- Support hotkey to disable trackpoint doubletap
- Support for system debug info hotkey
- Support for trackpoint doubletap
- Simplify known_ev handling
- Add mappings for adaptive kbd clipping-tool and cloud keys
- Switch to using sparse-keymap helpers
- Drop KEY_RESERVED special handling
- Use correct keycodes for volume and brightness keys
- Change hotkey_reserved_mask initialization
- Do not send ACPI netlink events for unknown hotkeys
- Move tpacpi_driver_event() call to tpacpi_input_send_key()
- Move hkey > scancode mapping to tpacpi_input_send_key()
- Drop tpacpi_input_send_key_masked() and hotkey_driver_event()
- Always call tpacpi_driver_event() for hotkeys
- Move hotkey_user_mask check to tpacpi_input_send_key()
- Move special original hotkeys handling out of switch-case
- Move adaptive kbd event handling to tpacpi_driver_event()
- Make tpacpi_driver_event() return if it handled the event
- Do hkey to scancode translation later
- Use tpacpi_input_send_key() in adaptive kbd code
- Drop ignore_acpi_ev
- Drop setting send_/ignore_acpi_ev defaults twice
- Provide hotkey_poll_stop_sync() dummy
- Take hotkey_mutex during hotkey_exit()
- change sprintf() to sysfs_emit()
- use platform_profile_cycle()
tools arch x86:
- Add dell-uart-backlight-emulator
tools/arch/x86/intel_sdsi:
- Add current meter support
- Simplify ascii printing
- Fix meter_certificate decoding
- Fix meter_show display
- Fix maximum meter bundle length
tools/power/x86/intel-speed-select:
- v1.19 release
- Display CPU as None for -1
- SST BF/TF support per level
- Increase number of CPUs displayed
- Present all TRL levels for turbo-freq
- Fix display for unsupported levels
- Support multiple dies
- Increase die count
toshiba_acpi:
- Add quirk for buttons on Z830
uv_sysfs:
- use sysfs_emit() instead of sprintf()
wmi:
- Add MSI WMI Platform driver
- Add driver development guide
- Mark simple WMI drivers as legacy-free
- Avoid returning AE_OK upon unknown error
- Support reading/writing 16 bit EC values
x86-android-tablets:
- Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
- Xiaomi pad2 RGB LED fwnode updates
- Pass struct device to init()
- Add Lenovo Yoga Tablet 2 Pro 1380F/L data
- Unregister devices in reverse order
- Add swnode for Xiaomi pad2 indicator LED
- Use GPIO_LOOKUP() macro
xiaomi-wmi:
- Drop unnecessary NULL checks
- Fix race condition when reporting key events
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmZF1kwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wSXwgAsaSH6Sawn5sHOj52lQY7gNI0uf3V
YfZFawRpreCrlwLPU2f7SX0mLW+hh+ekQ2C1NvaUUVqQwzONELh0DWSYJpzz/v1r
jD14EcY2dnTv+FVyvCj5jZsiYxo/ViTvthMduiO7rrJKN7aOej9iNn68P0lvcY8s
HDJ2lPFNGnY01snz3C1NyjyIWw8YsfwqXEqOmhrDyyoKLXpsDs8H/Jqq5yXfeLax
hSpjbGB85EGJPXna6Ux5TziPh/MYMtF1+8R4Fn0sGvfcZO6/H1fDne0uI9UwrKnN
d2g4VHXU2DIhTshUc14YT2AU27eQiZVN+J3VpuYIbC9cmlQ2F6bjN3uxoQ==
=UWbu
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
Simon Glass wanted to support binman's output properties in order to
check their validity using the binding checks and proposed changes with
the missing properties as well as a binman compatible.
Krzysztof Kozlowski on his side shared a new yaml for describing
Samsung's OneNAND interface.
The interface with NVMEM has also been slightly improved/fixed,
especially now that OTP are also supported in the NAND subsystem.
Along with these changes, small cleanups have also been contributed
around ID tables, structure sizes, arithmetic checks and comments.
* Raw NAND subsystem
Two small fixes, one in the Hynix vendor code for properly returning an
error which might have been ignored and another in the Davinci driver to
properly synchronize the controller with the gpio domain.
* SPI NOR subsystem
SPI NOR now uses div_u64() instead of div64_u64() in places where the
divisor is 32 bits. Many 32 bit architectures can optimize this variant
better than a full 64 bit divide.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmZFzEwACgkQJWrqGEe9
VoRNZwf/dTvWM2r/tLPkXJ4lDdZUMJO2Z5YebSwcUWTJ8P4yhoGfxDwgEiWaaauF
Z++MdSBEK3C9us19ro+YCFidq7T+m1PcekHLa1Zckcy2NOLFyRT7O5j16CEQKHlj
a/9WfZ37TIaWelZDXnm6nWyTxsDFp5h9IOsG32/SckBFm/TU0+G2MCKz7HvJ6DRg
/K6Yu+3KpxhO0D3PhTm5+Fi7UhBPABKfvBYrLFiYnuMi3d0L6/75wxj8dje7iW+Q
9WusrjKvhf3ffp9715RxjDQdMA1MIa/ok7tIlTQXyBfDM1xZkr6MDNeDJfd2FU7J
2hk/ga7A/zigKJ37ftw/34YZJK6xmw==
=AtHp
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- Simon Glass wanted to support binman's output properties in order
to check their validity using the binding checks and proposed
changes with the missing properties as well as a binman compatible.
- Krzysztof Kozlowski on his side shared a new yaml for describing
Samsung's OneNAND interface.
- The interface with NVMEM has also been slightly improved/fixed,
especially now that OTP are also supported in the NAND subsystem.
- Along with these changes, small cleanups have also been contributed
around ID tables, structure sizes, arithmetic checks and comments.
Raw NAND subsystem:
- Two small fixes, one in the Hynix vendor code for properly
returning an error which might have been ignored and another in the
Davinci driver to properly synchronize the controller with the gpio
domain.
SPI NOR subsystem:
- SPI NOR now uses div_u64() instead of div64_u64() in places where
the divisor is 32 bits. Many 32 bit architectures can optimize this
variant better than a full 64 bit divide"
* tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: replace unnecessary div64_u64() with div_u64()
mtd: mchp23k256: drop unneeded MODULE_ALIAS
dt-bindings: mtd: fixed-partition: Add binman compatibles
dt-bindings: mtd: fixed-partitions: Add alignment properties
mtd: maps: sa1100-flash: Prefer struct_size over open coded arithmetic
mtd: core: Align comment with an action in mtd_otp_nvmem_add()
mtd: rawnand: hynix: fixed typo
mtd: rawnand: davinci: Add dummy read after sending command
mtd: partitions: redboot: Added conversion of operands to a larger type
dt-bindings: mtd: Add Samsung S5Pv210 OneNAND
mtd: core: Don't fail mtd_otp_nvmem_add() if OTP is unsupported
mtd: core: Report error if first mtd_otp_size() call fails in mtd_otp_nvmem_add()
When thresholds used to monitor VFs activities are configured,
then GuC may send GUC2PF_ADVERSE_EVENT messages informing the
PF driver about exceeded thresholds. Start handling such messages.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514190015.2172-8-michal.wajdeczko@intel.com
When thresholds used to monitor VFs activities are configured,
then GuC may send GUC2PF_ADVERSE_EVENT messages informing the
PF driver about exceeded thresholds. Add necessary definitions
to our GuC firmware ABI header.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514190015.2172-7-michal.wajdeczko@intel.com
Initial values of all thresholds used by the GuC to monitor VF's
activity is zero (disabled) and we need to explicitly configure
them per each VF. Expose additional attributes over debugfs.
Definitions of all attributes are generated so we will not need
to make any changes if new thresholds would be added to the set.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514190015.2172-6-michal.wajdeczko@intel.com
The GuC firmware monitors VF's activity and notifies the PF driver
once any configured threshold related to such activity is exceeded.
Add functions to allow configuration of these thresholds per VF.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514190015.2172-5-michal.wajdeczko@intel.com
The GuC firmware monitors VF's activity and notifies the PF driver
once any configured threshold related to such activity is exceeded.
The available thresholds are defined in the GuC ABI as part of the
GuC VF Configuration KLVs. Threshold configurations performed by
the PF driver and notifications sent by the GuC rely on the KLV keys,
which are not zero-based and might not guarantee continuity.
To simplify the driver code and eliminate the need to repeat very
similar code for each threshold, introduce the threshold set macro
that allows to generate required code based on unique threshold tag.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514190015.2172-3-michal.wajdeczko@intel.com
In upcoming patches we will want to generate some of the KLV keys
from other macros. Add MAKE_GUC_KLV_{KEY|LEN} macros for that and
make sure they will correctly expand provided TAG parameter. Also
fix PREP_GUC_KLV_TAG to also work correctly within other macros.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514190015.2172-2-michal.wajdeczko@intel.com
- Increase the timeout period of the ACMD41 command
- Add card entry for quirks to debugfs
- Add mmc_gpiod_set_cd_config() function
- Store owner from SDIO modules with sdio_register_driver()
MMC host:
- atmel-mci: Some cleanups and a switch to use dev_err_probe()
- renesas_sdhi: Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
- renesas_sdhi: Set the SDBUF after reset
- sdhci: Add support for "Tuning Error" interrupts
- sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
- sdhci-acpi: Disable write protect detection on Toshiba WT10-A
- sdhci-acpi: Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
- sdhci_am654: Re-work and fix the tuning support for multiple speed-modes
- sdhci_am654: Add tuning algorithm for delay chain
- sdhci-esdhc-imx: Add NXP S32G3 support
- sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
- sdhci-of-dwcmshc: Implement SDHCI CQE support
- sdhci-pci-gli: Use the proper pci_set_power_state() instead of PMCSR writes
MEMSTICK:
- Convert a couple of drivers to use the ->remove_new() callback
-----BEGIN PGP SIGNATURE-----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=I2JP
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Increase the timeout period of the ACMD41 command
- Add card entry for quirks to debugfs
- Add mmc_gpiod_set_cd_config() function
- Store owner from SDIO modules with sdio_register_driver()
MMC host:
- atmel-mci: Some cleanups and a switch to use dev_err_probe()
- renesas_sdhi:
- Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
- Set the SDBUF after reset
- sdhci: Add support for "Tuning Error" interrupts
- sdhci-acpi:
- Add quirk to enable pull-up on the card-detect GPIO on Asus
T100TA
- Disable write protect detection on Toshiba WT10-A
- Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
- sdhci_am654:
- Re-work and fix the tuning support for multiple speed-modes
- Add tuning algorithm for delay chain
- sdhci-esdhc-imx: Add NXP S32G3 support
- sdhci-of-dwcmshc:
- Add tuning support for Sophgo CV1800B and SG200X
- Implement SDHCI CQE support
- sdhci-pci-gli: Use the proper pci_set_power_state() instead of
PMCSR writes"
MEMSTICK:
- Convert a couple of drivers to use the ->remove_new() callback"
* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
mmc: renesas_sdhi: Set the SDBUF after reset
mmc: core: Increase the timeout period of the ACMD41 command
mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
mmc: atmel-mci: Switch to use dev_err_probe()
mmc: atmel-mci: Incapsulate used to be a platform data into host structure
mmc: atmel-mci: Replace platform device pointer by generic one
mmc: atmel-mci: Use temporary variable for struct device
mmc: atmel-mci: Get rid of platform data leftovers
mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
mmc: sdhci-s3c: Choose sdhci_ops based on variant
mmc: sdhci_am654: Constify struct sdhci_ops
mmc: sdhci-sprd: Constify struct sdhci_ops
mmc: sdhci-omap: Constify struct sdhci_ops
mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
mmc: slot-gpio: Use irq_handler_t type
mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
...
-----BEGIN PGP SIGNATURE-----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=JM5r
-----END PGP SIGNATURE-----
Merge tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
buddy:
- fix breakage in buddy allocator.
-----BEGIN PGP SIGNATURE-----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=w/fd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fix from Dave Airlie:
- fix breakage in buddy allocator
* tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernel:
drm/tests: Add a unit test for range bias allocation
drm/buddy: Fix the range bias clear memory allocation issue
Move -t, --trace from common_options.rst to
common_osnoise_options.rst and
common_timerlat_options.rst
so that it will appear in the man pages
rtla-timerlat-hist.1
rtla-timerlat-top.1
rtla-osnoise-hist.1
rtla-osnoise-top.1
Remove the equals ('=') sign and add a space.
Link: https://lkml.kernel.org/r/20240516143121.12614-1-jkacur@redhat.com
Cc: Daniel Bristot de Oliveria <bristot@kernel.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
The -t option has an optional argument.
The usual case is for a short option to be specified without an '='
and for the long version to be specified with an '='
Various forms of this do not work as expected.
For example:
rtla timerlat hist -T50 -tfile.txt
will result in a truncated file name of "ile.txt"
Another example is that the long form without the '=' will result in the
default file name instead of the requested file name.
This patch properly parses the optional argument with and without '='
and with and without spaces for the short form.
This patch was also tested using -t and --trace without providing a file
name both as the last requested option and with a following long and
short option.
For example:
rtla timerlat hist -T50 -t -u
rtla timerlat hist -T50 --trace -u
This fix is applied to both timerlat top and hist
and to osnoise top and hist.
Here is the full testing for rtla timerlat hist.
Before applying the patch
rtla timerlat hist -T50 -t=file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 -tfile.txt
Truncated file name "ile.txt"
rtla timerlat hist -T50 -t file.txt
Default file name instead of file.txt
rtla timerlat hist -T50 --trace=file.txt
Truncated file name "ile.txt"
rtla timerlat hist -T50 --trace file.txt
Default file name "timerlat_trace.txt" instead of "file.txt"
After applying the patch:
rtla timerlat hist -T50 -t=file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 -tfile.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 -t file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 --trace=file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 --trace file.txt
Works as expected, "file.txt"
In addition the following tests were performed to make sure that
the default file name worked as expected including with trailing
options.
rtla timerlat hist -T50 -t
Works as expected "timerlat_trace.txt"
rtla timerlat hist -T50 --trace
Works as expected "timerlat_trace.txt"
rtla timerlat hist -T50 -t -u
Works as expected "timerlat_trace.txt"
rtla timerlat hist -T50 --trace -u
Works as expected "timerlat_trace.txt"
Link: https://lkml.kernel.org/r/20240515183024.59985-1-jkacur@redhat.com
Cc: Daniel Bristot de Oliveria <bristot@kernel.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
On short runs it is possible to get no samples on a cpu, like this:
# rtla timerlat hist -u -T50
Index IRQ-001 Thr-001 Usr-001 IRQ-002 Thr-002 Usr-002
2 1 0 0 0 0 0
33 0 1 0 0 0 0
36 0 0 1 0 0 0
49 0 0 0 1 0 0
52 0 0 0 0 1 0
over: 0 0 0 0 0 0
count: 1 1 1 1 1 0
min: 2 33 36 49 52 18446744073709551615
avg: 2 33 36 49 52 -
max: 2 33 36 49 52 0
rtla timerlat hit stop tracing
IRQ handler delay: (exit from idle) 48.21 us (91.09 %)
IRQ latency: 49.11 us
Timerlat IRQ duration: 2.17 us (4.09 %)
Blocking thread: 1.01 us (1.90 %)
swapper/2:0 1.01 us
------------------------------------------------------------------------
Thread latency: 52.93 us (100%)
Max timerlat IRQ latency from idle: 49.11 us in cpu 2
Note, the value 18446744073709551615 is the same as ~0.
Fix this by reporting no results for the min, avg and max if the count
is 0.
Link: https://lkml.kernel.org/r/20240510190318.44295-1-jkacur@redhat.com
Cc: stable@vger.kernel.org
Fixes: 1eeb6328e8 ("rtla/timerlat: Add timerlat hist mode")
Suggested-by: Daniel Bristot de Oliveria <bristot@kernel.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Add the option allow the users to set a different buffer size for the
trace. For example, in large systems, the user might be interested on
reducing the trace buffer to avoid large tracing files.
The buffer size is specified in kB, and it is only affecting
the tracing instance.
The function trace_set_buffer_size() appears on libtracefs v1.6,
so increase the minimum required version on Makefile.config.
Link: https://lkml.kernel.org/r/e7c9ca5b3865f28e131a49ec3b984fadf2d056c6.1715860611.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Remove trailing whitespace from sound/hd-audio/notes as reported by
checkpatch. Removing trailing spaces improves consistency, and
prevents Preventing potential merge conflicts due to whitespace
differences. maintain a cleaner and more professional codebase.
Signed-off-by: Abhinav Saxena <xandfury@gmail.com>
Link: https://lore.kernel.org/r/20240515034103.1010269-1-xandfury@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently ALSA timer doesn't have the lower limit of the start tick
time, and it allows a very small size, e.g. 1 tick with 1ns resolution
for hrtimer. Such a situation may lead to an unexpected RCU stall,
where the callback repeatedly queuing the expire update, as reported
by fuzzer.
This patch introduces a sanity check of the timer start tick time, so
that the system returns an error when a too small start size is set.
As of this patch, the lower limit is hard-coded to 100us, which is
small enough but can still work somehow.
Reported-by: syzbot+43120c2af6ca2938cc38@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000fa00a1061740ab6d@google.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240514182745.4015-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With some compilers/configs fadump_setup_param_area() isn't inlined into
its caller (which is __init), leading to a section mismatch warning:
WARNING: modpost: vmlinux: section mismatch in reference:
fadump_setup_param_area+0x200 (section: .text.fadump_setup_param_area)
-> memblock_phys_alloc_range (section: .init.text)
Fix it by adding an __init annotation.
Fixes: 683eab94da ("powerpc/fadump: setup additional parameters for dump capture kernel")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240515163708.3380c4d1@canb.auug.org.au/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202405140922.oucLOx4Y-lkp@intel.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240516132631.347956-1-mpe@ellerman.id.au
A few of the ROHM PMICs allow setting low-power state specific voltages
for regulators. These voltages are then taken in use (by the hardware)
when the PMIC state is changed.
The voltages for these states can be given via device-tree. If
unsupported voltage has been given, the users have only seen print:
"driver callback failed to parse DT for regulator <name>". This does
help to pinpoint the problem to some extent, but there may be several
properties in device-tree so it should help if we can be a bit more
specific.
Print the voltage value and the run-state property if voltage can not be
supported.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://msgid.link/r/0937411855967cbefd9ff2d6045a52ca26712c4a.1715848512.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some of the regulators on the BD71828 have common voltage setting for
RUN/SUSPEND/IDLE/LPSR states. The enable control can be set for each
state though.
The driver allows setting the voltage values for these states via
device-tree. As a side effect, setting the voltages for
SUSPEND/IDLE/LPSR will also change the RUN level voltage which is not
desired and can break the system.
The comment in code reflects this behaviour, but it is likely to not
make people any happier. The right thing to do is to allow setting the
enable/disable state at SUSPEND/IDLE/LPSR via device-tree, but to
disallow setting state specific voltages for those regulators.
BUCK1 is a bit different. It only shares the SUSPEND and LPSR state
voltages. The former behaviour of allowing to silently overwrite the
SUSPEND state voltage by LPSR state voltage is also changed here so that
the SUSPEND voltage is prioritized over LPSR voltage.
Prevent setting PMIC state specific voltages for regulators which do not
support it.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 522498f8cb ("regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators")
Link: https://msgid.link/r/e1883ae1e3ae5668f1030455d4750923561f3d68.1715848512.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add implicit fallthrough checking to the decompressor code and fix this
warning:
arch/x86/boot/printf.c: In function ‘vsprintf’:
arch/x86/boot/printf.c:248:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
248 | flags |= SMALL;
| ^
arch/x86/boot/printf.c:249:3: note: here
249 | case 'X':
| ^~~~
This is a patch from three years ago which I found in my trees, thus the
SUSE authorship still.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240516102240.16270-1-bp@kernel.org
