On older platforms (12.00) the PF driver must explicitly unblock
VF's modifications to the GGTT. On newer platforms this capability
is enabled by default.
Bspec: 49908, 53204
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425143927.2265-1-michal.wajdeczko@intel.com
Remove a redundant expansion of the AES key, and use rodata for zeroes.
Also rename rfc4106_set_hash_subkey() to aes_gcm_derive_hash_subkey()
because it's used for both versions of AES-GCM, not just RFC4106.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Delete aesni_gcm_enc() and aesni_gcm_dec() because they are unused.
Only the incremental AES-GCM functions (aesni_gcm_init(),
aesni_gcm_enc_update(), aesni_gcm_finalize()) are actually used.
This saves 17 KB of object code.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the total length processed by the loop in xts_crypt_slowpath() is
a multiple of AES_BLOCK_SIZE, just round the length down to
AES_BLOCK_SIZE even on the last step. This doesn't change behavior, as
the last step will process a multiple of AES_BLOCK_SIZE regardless.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The clock management in this driver does not seem to be correct. The
struct hwrng .init callback enables the clock, but there is no matching
.cleanup callback to disable the clock. The clock get disabled as some
later point by runtime PM suspend callback.
Furthermore, both runtime PM and sleep suspend callbacks access registers
first and disable clock which are used for register access second. If the
IP is already in RPM suspend and the system enters sleep state, the sleep
callback will attempt to access registers while the register clock are
already disabled. This bug has been fixed once before already in commit
9bae54942b ("hwrng: stm32 - fix pm_suspend issue"), and regressed in
commit ff4e46104f ("hwrng: stm32 - rework power management sequences") .
Fix this slightly differently, disable register clock at the end of .init
callback, this way the IP is disabled after .init. On every access to the
IP, which really is only stm32_rng_read(), do pm_runtime_get_sync() which
is already done in stm32_rng_read() to bring the IP from RPM suspend, and
pm_runtime_mark_last_busy()/pm_runtime_put_sync_autosuspend() to put it
back into RPM suspend.
Change sleep suspend/resume callbacks to enable and disable register clock
around register access, as those cannot use the RPM suspend/resume callbacks
due to slightly different initialization in those sleep callbacks. This way,
the register access should always be performed with clock surely enabled.
Fixes: ff4e46104f ("hwrng: stm32 - rework power management sequences")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case of an irrecoverable failure, put the IP into RPM suspend
to avoid RPM imbalance. I did not trigger this case, but it seems
it should be done based on reading the code.
Fixes: b17bc6eb7c ("hwrng: stm32 - rework error handling in stm32_rng_read()")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The conditional is used to check whether err is non-zero OR whether
reg variable is non-zero after clearing bits from it. This should be
done using logical OR, not bitwise OR, fix it.
Fixes: 6b85a7e141 ("hwrng: stm32 - implement STM32MP13x support")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The private key in ctx->private_key is currently initialized in reverse
byte order in ecdh_set_secret and whenever the key is needed in proper
byte order the variable priv is introduced and the bytes from
ctx->private_key are copied into priv while being byte-swapped
(ecc_swap_digits). To get rid of the unnecessary byte swapping initialize
ctx->private_key in proper byte order and clean up all functions that were
previously using priv or were called with ctx->private_key:
- ecc_gen_privkey: Directly initialize the passed ctx->private_key with
random bytes filling all the digits of the private key. Get rid of the
priv variable. This function only has ecdh_set_secret as a caller to
create NIST P192/256/384 private keys.
- crypto_ecdh_shared_secret: Called only from ecdh_compute_value with
ctx->private_key. Get rid of the priv variable and work with the passed
private_key directly.
- ecc_make_pub_key: Called only from ecdh_compute_value with
ctx->private_key. Get rid of the priv variable and work with the passed
private_key directly.
Cc: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ecc_is_key_valid expects a key with the most significant digit in the last
entry of the digit array. Currently ecdh_set_secret passes a reversed key
to ecc_is_key_valid that then passes the rather simple test checking
whether the private key is in range [2, n-3]. For all current ecdh-
supported curves (NIST P192/256/384) the 'n' parameter is a rather large
number, therefore easily passing this test.
Throughout the ecdh and ecc codebase the variable 'priv' is used for a
private_key holding the bytes in proper byte order. Therefore, introduce
priv in ecdh_set_secret and copy the bytes from ctx->private_key into
priv in proper byte order by using ecc_swap_digits. Pass priv to
ecc_is_valid_key.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.
The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW.
Fixes: 69e7649f7c ("crypto: qat - add support for device telemetry")
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding
cryptographic information should be zeroized once they are no longer
needed. Accomplish this by using kfree_sensitive for buffers that
previously held the private key.
Signed-off-by: Hailey Mothershead <hailmo@amazon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tweak the round key logic so that they can be loaded using a single
branchless sequence using overlapping loads. This is shorter and
simpler, and puts the conditional branches based on the key size further
apart, which might benefit microarchitectures that cannot record taken
branches at every instruction. For these branches, use test-bit-branch
instructions that don't clobber the condition flags.
Note that none of this has any impact on performance, positive or
otherwise (and the branch prediction benefit would only benefit AES-192
which nobody uses). It does make for nicer code, though.
While at it, use \@ to generate the labels inside the macros, which is
more robust than using fixed numbers, which could clash inadvertently.
Also, bring aes-neon.S in line with these changes, including the switch
to test-and-branch instructions, to avoid surprises in the future when
we might start relying on the condition flags being preserved in the
chaining mode wrappers in aes-modes.S
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
gmin_i2c_dev_exists() is using open-coded variant of
i2c_find_device_by_fwnode(). Replace it with a corresponding call.
Link: https://lore.kernel.org/r/20240326202813.1425431-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
We don't use the PMIC I²C client device after getting its address.
Drop the reference to it. We do not expect device to disappear
as it should be taken care by the OpRegion drivers.
Link: https://lore.kernel.org/r/20240326202813.1425431-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Entire defs.h can be killed, so do that.
Also kill same macro definitions in hive_types.h
Link: https://lore.kernel.org/r/20240326190903.1422069-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch makes the following changes:
* Removes spurious whitespace after the opening parentheses as per code
style guidelines
Link: https://lore.kernel.org/r/20240227163043.112162-2-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch makes the following fixes:
* Reformats a number of multiline block comments to ensure * and */ align
correctly
Link: https://lore.kernel.org/r/20240227163043.112162-1-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch fixes the following minor code and code style issues:
* Removes a block of commented out (unused) code from the src
* Reformats various multiline block comments to meet the kernel code
style guidelines for block comments
Link: https://lore.kernel.org/r/20240226194023.69070-7-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch makes the following change:
* Removes an unnecessary 'return' statement from a void function
implementation
Link: https://lore.kernel.org/r/20240226194023.69070-6-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch makes the following changes:
* Removes additional, unnecessary parentheses from a conditional "if"
statement
Link: https://lore.kernel.org/r/20240226194023.69070-5-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch fixes the following minor code style issues:
* Ensure trailing statements are located on a newline
* Removes an instance of a spurious whitespace following a conditional
statement
Link: https://lore.kernel.org/r/20240226194023.69070-4-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This code fixes a code style issue where:
* Checkpatch suggests using "unsigned int *" rather than a bare
"unsigned *" declaration in the code
Link: https://lore.kernel.org/r/20240226194023.69070-3-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch does the following things:
* Tidies up code in several places where braces were used in conjunction
with single line conditional statements
Link: https://lore.kernel.org/r/20240226194023.69070-2-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With the current thermal zone locking arrangement in the debugfs code,
user space can open the "mitigations" file for a thermal zone before
the zone's debugfs pointer is set which will result in a NULL pointer
dereference in tze_seq_start().
Moreover, thermal_debug_tz_remove() is not called under the thermal
zone lock, so it can run in parallel with the other functions accessing
the thermal zone's struct thermal_debugfs object. Then, it may clear
tz->debugfs after one of those functions has checked it and the
struct thermal_debugfs object may be freed prematurely.
To address the first problem, pass a pointer to the thermal zone's
struct thermal_debugfs object to debugfs_create_file() in
thermal_debug_tz_add() and make tze_seq_start(), tze_seq_next(),
tze_seq_stop(), and tze_seq_show() retrieve it from s->private
instead of a pointer to the thermal zone object. This will ensure
that tz_debugfs will be valid across the "mitigations" file accesses
until thermal_debugfs_remove_id() called by thermal_debug_tz_remove()
removes that file.
To address the second problem, use tz->lock in thermal_debug_tz_remove()
around the tz->debugfs value check (in case the same thermal zone is
removed at the same time in two different threads) and its reset to NULL.
Fixes: 7ef01f228c ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
This patch fixes the following code style and formatting issues:
* Ensure multiline block comments are correctly formatted
* Remove extra braces not required for single line conditional statements
Link: https://lore.kernel.org/r/20240225155359.41435-1-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Because thermal_debug_tz_remove() does not free all memory allocated for
thermal zone diagnostics, some of that memory becomes unreachable after
freeing the thermal zone's struct thermal_debugfs object.
Address this by making thermal_debug_tz_remove() free all of the memory
in question.
Fixes: 7ef01f228c ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
This patch fixes the following formatting issues:
* Fix various misaligned * and */ in multiline block comments
* Remove unnecessary braces from single line conditional statements
* Remove repeated word "from" from comment
Link: https://lore.kernel.org/r/20240225120350.31226-1-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When starting a new stream initialize the sequence counters to 0
instead of -1. This fixes the following libcamera warning:
Zero sequence expected for first frame (got 4294967295)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Disable V4L2_PIX_FMT_RGBX32 support, because it is broken.
Selecting V4L2_PIX_FMT_RGBX32 output shows vertical columns with random
data. For each 128 pixels in a row the last 28 (32?) or so pixels contain
random data.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
V4L2_PIX_FMT_RGB32 is deprecated because its definition never made
clear if the 4th byte was alpha data or unused. Instead either
V4L2_PIX_FMT_ARGB32 or V4L2_PIX_FMT_RGBX32 should be used.
V4L2_PIX_FMT_RGB32 internally is mapped to IA_CSS_FRAME_FORMAT_RGBA888
and ia_css_frame_format.h says that the alpha bits there are unused,
so replace V4L2_PIX_FMT_RGB32 with V4L2_PIX_FMT_RGBX32.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Some userspace apps (e.g. libcamera) do not like it if the enum_fmts
ioctl returns the same fmt twice. Drop the second "do not use"
V4L2_PIX_FMT_UYVY entry for parallel sensors to fix this.
The current atomisp code does not support anything other then raw bayer
sensors anyways, so dropping this is not an issue.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Xiumei and Christoph reported the following lockdep splat, complaining of
the qdisc root lock being taken twice:
============================================
WARNING: possible recursive locking detected
6.7.0-rc3+ #598 Not tainted
--------------------------------------------
swapper/2/0 is trying to acquire lock:
ffff888177190110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
but task is already holding lock:
ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&sch->q.lock);
lock(&sch->q.lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by swapper/2/0:
#0: ffff888135a09d98 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x11a/0x510
#1: ffffffffaaee5260 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x2c0/0x1ed0
#2: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
#3: ffff88811995a110 (&sch->q.lock){+.-.}-{2:2}, at: __dev_queue_xmit+0x1560/0x2e70
#4: ffffffffaaee5200 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x209/0x2e70
stack backtrace:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.7.0-rc3+ #598
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x4a/0x80
__lock_acquire+0xfdd/0x3150
lock_acquire+0x1ca/0x540
_raw_spin_lock+0x34/0x80
__dev_queue_xmit+0x1560/0x2e70
tcf_mirred_act+0x82e/0x1260 [act_mirred]
tcf_action_exec+0x161/0x480
tcf_classify+0x689/0x1170
prio_enqueue+0x316/0x660 [sch_prio]
dev_qdisc_enqueue+0x46/0x220
__dev_queue_xmit+0x1615/0x2e70
ip_finish_output2+0x1218/0x1ed0
__ip_finish_output+0x8b3/0x1350
ip_output+0x163/0x4e0
igmp_ifc_timer_expire+0x44b/0x930
call_timer_fn+0x1a2/0x510
run_timer_softirq+0x54d/0x11a0
__do_softirq+0x1b3/0x88f
irq_exit_rcu+0x18f/0x1e0
sysvec_apic_timer_interrupt+0x6f/0x90
</IRQ>
This happens when TC does a mirred egress redirect from the root qdisc of
device A to the root qdisc of device B. As long as these two locks aren't
protecting the same qdisc, they can be acquired in chain: add a per-qdisc
lockdep key to silence false warnings.
This dynamic key should safely replace the static key we have in sch_htb:
it was added to allow enqueueing to the device "direct qdisc" while still
holding the qdisc root lock.
v2: don't use static keys anymore in HTB direct qdiscs (thanks Eric Dumazet)
CC: Maxim Mikityanskiy <maxim@isovalent.com>
CC: Xiumei Mu <xmu@redhat.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/451
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7dc06d6158f72053cf877a82e2a7a5bd23692faa.1713448007.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Creates an anon_inode_getfile_fmode() function that works similarly to
anon_inode_getfile() with the addition of being able to set the fmode
member.
Signed-off-by: Dawid Osuchowski <linux@osuchow.ski>
Link: https://lore.kernel.org/r/20240426075854.4723-1-linux@osuchow.ski
Signed-off-by: Christian Brauner <brauner@kernel.org>
SBI PMU test comprises of multiple tests and user may want to run
only a subset depending on the platform. The most common case would
be to run all to validate all the tests. However, some platform may
not support all events or all ISA extensions.
The commandline option allows user to disable any set of tests if
they want to.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-25-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a test for verifying overflow interrupt. Currently, it relies on
overflow support on cycle/instret events. This test works for cycle/
instret events which support sampling via hpmcounters on the platform.
There are no ISA extensions to detect if a platform supports that. Thus,
this test will fail on platform with virtualization but doesn't
support overflow on these two events.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-24-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Verify PMU snapshot functionality by setting up the shared memory
correctly and reading the counter values from the shared memory
instead of the CSR.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-23-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
This test implements basic sanity test and cycle/instret event
counting tests.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-22-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM RISC-V allows Sscofpmf extension for Guest/VM so let us
add this extension to get-reg-list test.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-20-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
__vcpu_has_ext can check both SBI and ISA extensions when the first
argument is properly converted to SBI/ISA extension IDs. Introduce
two helper functions to make life easier for developers so they
don't have to worry about the conversions.
Replace the current usages as well with new helpers.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-19-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The SBI definitions will continue to grow. Move the sbi related
definitions to its own header file from processor.h
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-18-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Rename the function to indicate that it is meant for firmware
counter read. While at it, add a range sanity check for it as
well.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-17-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The SBI v2.0 introduced a fw_read_hi function to read 64 bit firmware
counters for RV32 based systems.
Add infrastructure to support that.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-16-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
KVM enables perf for guest via counter virtualization. However, the
sampling can not be supported as there is no mechanism to enabled
trap/emulate scountovf in ISA yet. Rely on the SBI PMU snapshot
to provide the counter overflow data via the shared memory.
In case of sampling event, the host first sets the guest's LCOFI
interrupt and injects to the guest via irq filtering mechanism defined
in AIA specification. Thus, ssaia must be enabled in the host in order
to use perf sampling in the guest. No other AIA dependency w.r.t kernel
is required.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-15-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
PMU Snapshot function allows to minimize the number of traps when the
guest access configures/access the hpmcounters. If the snapshot feature
is enabled, the hypervisor updates the shared memory with counter
data and state of overflown counters. The guest can just read the
shared memory instead of trap & emulate done by the hypervisor.
This patch doesn't implement the counter overflow yet.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-14-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, we return a linux error code if creating a perf event failed
in kvm. That shouldn't be necessary as guest can continue to operate
without perf profiling or profiling with firmware counters.
Return appropriate SBI error code to indicate that PMU configuration
failed. An error message in kvm already describes the reason for failure.
Fixes: 0cb74b65d2 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-13-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
