The virtual counter value is updated during pmu_ctr_read. There is no need
to update it in reset case. Otherwise, it will be counted twice which is
incorrect.
Fixes: 0cb74b65d2 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-12-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The initial sample period value when counter value is not assigned
should be set to maximum value supported by the counter width.
Otherwise, it may result in spurious interrupts.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-11-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI v2.0 SBI introduced PMU snapshot feature which adds the following
features.
1. Read counter values directly from the shared memory instead of
csr read.
2. Start multiple counters with initial values with one SBI call.
These functionalities optimizes the number of traps to the higher
privilege mode. If the kernel is in VS mode while the hypervisor
deploy trap & emulate method, this would minimize all the hpmcounter
CSR read traps. If the kernel is running in S-mode, the benefits
reduced to CSR latency vs DRAM/cache latency as there is no trap
involved while accessing the hpmcounter CSRs.
In both modes, it does saves the number of ecalls while starting
multiple counter together with an initial values. This is a likely
scenario if multiple counters overflow at the same time.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-10-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
A pin controller device mapped with the gpio-ranges property
will need implementations of the .request and .free members of
the gpiochip.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Tested-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240424185039.1707812-4-opendmb@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some drivers (e.g. gpio-mt7621 and gpio-brcmstb) have multiple
gpiochip banks within a single device. Unfortunately, the
gpio-ranges property of the device node was being applied to
every gpiochip of the device with device relative GPIO offset
values rather than gpiochip relative GPIO offset values.
This commit makes use of the gpio_chip offset value which can be
non-zero for such devices to split the device node gpio-ranges
property into GPIO offset ranges that can be applied to each
of the relevant gpiochips of the device.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240424185039.1707812-3-opendmb@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In the context of changing my career path, my Pengutronix email address
will soon stop to be available to me. Update the PWM maintainer entry to
my kernel.org identity.
I drop my co-maintenance of SIOX. Thorsten will continue to care for
it with the support of the Pengutronix kernel team.
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://lore.kernel.org/r/20240424212626.603631-2-ukleinek@kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
I no longer have access to PCA9541 hardware, and I am no longer involved
in related development. Listing me as PCA9541 maintainer does not make
sense anymore. Remove PCA9541 from MAINTAINERS to let its support default
to the generic I2C multiplexer entry.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
- move the nvmem registration after the test one-byte read to improve the
situation with a race condition in nvmem
- fix the DT schema for ST M24C64-D
-----BEGIN PGP SIGNATURE-----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=OVCJ
-----END PGP SIGNATURE-----
Merge tag 'at24-fixes-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v6.9-rc6
- move the nvmem registration after the test one-byte read to improve the
situation with a race condition in nvmem
- fix the DT schema for ST M24C64-D
Add a new enum and a xfs_dir2_format helper that returns it to allow
the code to switch on the format of a directory in a single operation
and switch all helpers of xfs_dir2_isblock and xfs_dir2_isleaf to it.
This also removes the explicit xfs_iread_extents call in a few of the
call sites given that xfs_bmap_last_offset already takes care of it
underneath.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Add a helper to switch between the different directory formats for
removing a directory entry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Add a helper to switch between the different directory formats for
removing a directory entry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Add a helper to switch between the different directory formats for
creating a directory entry and to handle the XFS_DA_OP_JUSTCHECK flag
based on the passed in ino number field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Add a helper to switch between the different directory formats for
lookup and to handle the -EEXIST return for a successful lookup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
After platform data is gone, we always allocate memory for the slot
information. Incapsulate the array of the latter into the host structure,
so we allocate memory only once. This makes code simpler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240425170900.3767990-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.9-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.10.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There no need to keep a pointer to a platform device as it's not
used outside of ->probe() and ->remove() callbacks.
Replace platform device pointer by generic one in host structure.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240417165708.2965612-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The commit d2c6d518c2 ("mmc: atmel-mci: move atmel MCI header file")
made sure that there is no in-kernel user of the platform data. But
at the same time it hadn't removed the code around that data structure.
Finish the job here and remove a dead code.
Fixes: d2c6d518c2 ("mmc: atmel-mci: move atmel MCI header file")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240417165708.2965612-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Implement the .platform_execute_tuning for Sophgo CV1800B and SG200X.
Some code is borrowed from sdhci-esdhc-imx.c. The tuning result is
similar as the one of SoC vendor's SDK.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240420021429.454-1-jszhang@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The preceding "&" before th1520_execute_tuning is useless, remove it.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240414164357.2841-1-jszhang@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The difference between old S3C64xx and newer Exynos4 SDHCI controller
variants is in clock handling (the "no_divider" field in drvdata).
Choose the proper sdhci_ops based on the variant instead of patching
ops in probe, if Exynos4 is used.
This allows making struct sdhci_ops const for code safety and probably
opens further options in the future, as the dynamic pointer ops table is
not anymore that dynamic.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240414-mmc-const-sdhci-ops-v2-5-262f81faadac@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The local struct sdhci_ops can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240414-mmc-const-sdhci-ops-v2-3-262f81faadac@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The irq_handler_t is already defined globally, let's use it
in slot-gpio code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240410195618.1632778-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The card-detect GPIO for the microSD slot on Asus T100TA / T100TAM models
stopped working under Linux after commit 6fd03f0248 ("gpiolib: acpi:
support bias pull disable").
The GPIO in question is connected to a mechanical switch in the slot
which shorts the pin to GND when a card is inserted.
The GPIO pin correctly gets configured with a 20K pull-up by the BIOS,
but there is a bug in the DSDT where the GpioInt for the card-detect is
configured with a PullNone setting:
GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x2710,
"\\_SB.GPO0", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0026
}
Linux now actually honors the PullNone setting and disables the 20K pull-up
configured by the BIOS.
Add a new DMI_QUIRK_SD_CD_ENABLE_PULL_UP quirk which when set calls
mmc_gpiod_set_cd_config() to re-enable the pull-up and set this for
the Asus T100TA models to fix this.
Fixes: 6fd03f0248 ("gpiolib: acpi: support bias pull disable")
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-7-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On the Toshiba WT10-A the microSD slot always reports the card being
write-protected, just like on the Toshiba WT8-B.
Add a DMI quirk to work around this.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-6-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Lenovo Yoga Tablet 2 Pro 1380 sdcard slot has an active high cd pin
and a broken wp pin which always reports the card being write-protected.
Add a DMI quirk to address both issues.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-5-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some mmc host drivers may need to fixup a card-detection GPIO's config
to e.g. enable the GPIO controllers builtin pull-up resistor on devices
where the firmware description of the GPIO is broken (e.g. GpioInt with
PullNone instead of PullUp in ACPI DSDT).
Since this is the exception rather then the rule adding a config
parameter to mmc_gpiod_request_cd() seems undesirable, so instead
add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper
to call gpiod_set_config() on the card-detect GPIO acquired through
mmc_gpiod_request_cd().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev. This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags. Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.
The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.
Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO. The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
1. Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
2. Add GAMMA 12-bit LUT support for MT8188
3. Add 0 size check to mtk_drm_gem_obj
4. Init `ddp_comp` with devm_kcalloc()
5. Rename mtk_drm_* to mtk_*
6. Drop driver owner initialization
7. Fix mtk_dp_aux_transfer return value
8. Correct calculation formula of PHY Timing
-----BEGIN PGP SIGNATURE-----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=xhbG
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.10
1. Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
2. Add GAMMA 12-bit LUT support for MT8188
3. Add 0 size check to mtk_drm_gem_obj
4. Init `ddp_comp` with devm_kcalloc()
5. Rename mtk_drm_* to mtk_*
6. Drop driver owner initialization
7. Fix mtk_dp_aux_transfer return value
8. Correct calculation formula of PHY Timing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425153859.3579-1-chunkuang.hu@kernel.org
This failed to build here after the header rework.
Fixes: 33d5ae6cac ("drm/print: drop include debugfs.h and include where needed")
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fails to build with missing seq declerations.
Fixes: 9e2b84fb6c ("drm/print: drop include seq_file.h")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add PCI subdevice ID for the Intel D5005 Stratix 10 FPGA card as
used with the Open FPGA Stack (OFS) FPGA Interface Manager (FIM).
Unlike the Intel D5005 PAC FIM which exposed a separate PCI device ID,
the OFS FIM reuses the same device ID for all DFL-based FPGA cards
and differentiates on the subdevice ID. The subdevice ID values were
chosen as the numeric part of the FPGA card names in hexadecimal.
Signed-off-by: Peter Colberg <peter.colberg@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240422230257.1959-1-peter.colberg@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
This commit adds kernel-doc style comments with complete parameter
descriptions for the function nilfs_remove_all_gcinodes.
Link: https://lkml.kernel.org/r/20240410075629.3441-4-konishi.ryusuke@gmail.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit adds kernel-doc style comments with complete parameter
descriptions for the function nilfs_btree_convert_and_insert.
Link: https://lkml.kernel.org/r/20240410075629.3441-3-konishi.ryusuke@gmail.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
gcc-9 warns about a possibly non-terminated string copy:
kernel/trace/blktrace.c: In function 'do_blk_trace_setup':
kernel/trace/blktrace.c:527:2: error: 'strncpy' specified bound 32 equals destination size [-Werror=stringop-truncation]
Newer versions are fine here because they see the following explicit
nul-termination. Using strscpy_pad() avoids the warning and
simplifies the code a little. The padding helps give a clean
buffer to userspace.
Link: https://lkml.kernel.org/r/20240409140059.3806717-5-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Justin Stitt <justinstitt@google.com>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Len Brown <lenb@kernel.org>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Richard Russon (FlatCap)" <ldm@flatcap.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The strncpy() here can cause a non-terminated string, which older gcc
versions such as gcc-9 warn about:
In function 'ldm_parse_tocblock',
inlined from 'ldm_validate_tocblocks' at block/partitions/ldm.c:386:7,
inlined from 'ldm_partition' at block/partitions/ldm.c:1457:7:
block/partitions/ldm.c:134:2: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
134 | strncpy (toc->bitmap1_name, data + 0x24, sizeof (toc->bitmap1_name));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
block/partitions/ldm.c:145:2: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
145 | strncpy (toc->bitmap2_name, data + 0x46, sizeof (toc->bitmap2_name));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
New versions notice that the code is correct after all because of the
following termination, but replacing the strncpy() with strscpy_pad()
or strcpy() avoids the warning and simplifies the code at the same time.
Use the padding version here to keep the existing behavior, in case
the code relies on not including uninitialized data.
Link: https://lkml.kernel.org/r/20240409140059.3806717-4-arnd@kernel.org
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Len Brown <lenb@kernel.org>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Richard Russon (FlatCap)" <ldm@flatcap.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
gcc can warn when a string is too long to fit into the strncpy()
destination buffer, as it is here depending on the function arguments:
inlined from 'test_hexdump_prepare_test.constprop' at /home/arnd/arm-soc/lib/test_hexdump.c:116:3:
include/linux/fortify-string.h:108:33: error: '__builtin_strncpy' output truncated copying between 0 and 32 bytes from a string of length 32 [-Werror=stringop-truncation]
108 | #define __underlying_strncpy __builtin_strncpy
| ^
include/linux/fortify-string.h:187:16: note: in expansion of macro '__underlying_strncpy'
187 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
The intention here is to copy exactly 'l' bytes without any padding or
NUL-termination, so the most logical change is to use memcpy(), just as
a previous change adapted the other output from strncpy() to memcpy().
Link: https://lkml.kernel.org/r/20240409140059.3806717-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Justin Stitt <justinstitt@google.com>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Len Brown <lenb@kernel.org>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Richard Russon (FlatCap)" <ldm@flatcap.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The default atime related mount option is '-o realtime' which means file
atime should be updated if atime <= ctime or atime <= mtime. atime should
be updated in the following scenario, but it is not:
==========================================================
$ rm /mnt/testfile;
$ echo test > /mnt/testfile
$ stat -c "%X %Y %Z" /mnt/testfile
1711881646 1711881646 1711881646
$ sleep 5
$ cat /mnt/testfile > /dev/null
$ stat -c "%X %Y %Z" /mnt/testfile
1711881646 1711881646 1711881646
==========================================================
And the reason the atime in the test is not updated is that ocfs2 calls
ktime_get_real_ts64() in __ocfs2_mknod_locked during file creation. Then
inode_set_ctime_current() is called in inode_set_ctime_current() calls
ktime_get_coarse_real_ts64() to get current time.
ktime_get_real_ts64() is more accurate than ktime_get_coarse_real_ts64().
In my test box, I saw ctime set by ktime_get_coarse_real_ts64() is less
than ktime_get_real_ts64() even ctime is set later. The ctime of the new
inode is smaller than atime.
The call trace is like:
ocfs2_create
ocfs2_mknod
__ocfs2_mknod_locked
....
ktime_get_real_ts64 <------- set atime,ctime,mtime, more accurate
ocfs2_populate_inode
...
ocfs2_init_acl
ocfs2_acl_set_mode
inode_set_ctime_current
current_time
ktime_get_coarse_real_ts64 <-------less accurate
ocfs2_file_read_iter
ocfs2_inode_lock_atime
ocfs2_should_update_atime
atime <= ctime ? <-------- false, ctime < atime due to accuracy
So here call ktime_get_coarse_real_ts64 to set inode time coarser while
creating new files. It may lower the accuracy of file times. But it's
not a big deal since we already use coarse time in other places like
ocfs2_update_inode_atime and inode_set_ctime_current.
Link: https://lkml.kernel.org/r/20240408082041.20925-5-glass.su@suse.com
Fixes: c62c38f6b9 ("ocfs2: replace CURRENT_TIME macro")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
transaction id should be updated in ocfs2_unlink and ocfs2_link.
Otherwise, inode link will be wrong after journal replay even fsync was
called before power failure:
=======================================================================
$ touch testdir/bar
$ ln testdir/bar testdir/bar_link
$ fsync testdir/bar
$ stat -c %h $SCRATCH_MNT/testdir/bar
1
$ stat -c %h $SCRATCH_MNT/testdir/bar
1
=======================================================================
Link: https://lkml.kernel.org/r/20240408082041.20925-4-glass.su@suse.com
Fixes: ccd979bdbc ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit "ocfs2: return real error code in ocfs2_dio_wr_get_block",
fstests/generic/300 become from always failed to sometimes failed:
========================================================================
[ 473.293420 ] run fstests generic/300
[ 475.296983 ] JBD2: Ignoring recovery information on journal
[ 475.302473 ] ocfs2: Mounting device (253,1) on (node local, slot 0) with ordered data mode.
[ 494.290998 ] OCFS2: ERROR (device dm-1): ocfs2_change_extent_flag: Owner 5668 has an extent at cpos 78723 which can no longer be found
[ 494.291609 ] On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted.
[ 494.292018 ] OCFS2: File system is now read-only.
[ 494.292224 ] (kworker/19:11,2628,19):ocfs2_mark_extent_written:5272 ERROR: status = -30
[ 494.292602 ] (kworker/19:11,2628,19):ocfs2_dio_end_io_write:2374 ERROR: status = -3
fio: io_u error on file /mnt/scratch/racer: Read-only file system: write offset=460849152, buflen=131072
=========================================================================
In __blockdev_direct_IO, ocfs2_dio_wr_get_block is called to add unwritten
extents to a list. extents are also inserted into extent tree in
ocfs2_write_begin_nolock. Then another thread call fallocate to puch a
hole at one of the unwritten extent. The extent at cpos was removed by
ocfs2_remove_extent(). At end io worker thread, ocfs2_search_extent_list
found there is no such extent at the cpos.
T1 T2 T3
inode lock
...
insert extents
...
inode unlock
ocfs2_fallocate
__ocfs2_change_file_space
inode lock
lock ip_alloc_sem
ocfs2_remove_inode_range inode
ocfs2_remove_btree_range
ocfs2_remove_extent
^---remove the extent at cpos 78723
...
unlock ip_alloc_sem
inode unlock
ocfs2_dio_end_io
ocfs2_dio_end_io_write
lock ip_alloc_sem
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_search_extent_list
^---failed to find extent
...
unlock ip_alloc_sem
In most filesystems, fallocate is not compatible with racing with AIO+DIO,
so fix it by adding to wait for all dio before fallocate/punch_hole like
ext4.
Link: https://lkml.kernel.org/r/20240408082041.20925-3-glass.su@suse.com
Fixes: b25801038d ("ocfs2: Support xfs style space reservation ioctls")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "ocfs2 bugs fixes exposed by fstests", v3.
The patchset is to fix some wrong behavior of ocfs2 exposed by fstests.
Patch 1 makes userspace happy when some error happens when doing direct
io. Before the patch, DIO always return -EIO in case of error. After the
patch, it returns real error code such like -ENOSPC, EDQUOT...
Patch 2 fixes an error case when doing AIO+DIO and hole punching at same
file position in parallel. generic/300
Patch 3 fixes inode link count mismatch after power failure. Without the
patch, inode link would be wrong even fync was called on the file.
tests/generic/040,041,104,107,336
patch 4 fixes wrong atime with mount option realtime. Without the patch,
atime of new created file won't be updated in right time.
tests/generic/192
For stable kernels, I added fixes to patch 2,3,4. The patch 1 is not
recommended to be backported since ocfs2_dio_wr_get_block calls too many
functions. It's diffcult to check every git history of ocfs2 for every
LTS kernel.
This patch (of 4):
ocfs2_dio_wr_get_block always returns -EIO in case of errors. However,
some programs expect right exit codes while doing dio. For example, tools
like fio treat -ENOSPC as expected code while doing stress jobs. And
quota tools expect -EDQUOT when disk quota exceeds.
-EIO is too strong return code in the dio path. The caller of
ocfs2_dio_wr_get_block is __blockdev_direct_IO which is widely used and it
handles error codes well. I have checked functions called by
ocfs2_dio_wr_get_block and their return codes look good and clear. So I
think it's safe to let ocfs2_dio_wr_get_block return real error code.
Link: https://lkml.kernel.org/r/20240408082041.20925-1-glass.su@suse.com
Link: https://lkml.kernel.org/r/20240408082041.20925-2-glass.su@suse.com
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
strncpy() is in the process of being replaced as it is deprecated [1].
We should move towards safer and less ambiguous string interfaces.
Looking at vmcoredd_header's definition:
| struct vmcoredd_header {
| __u32 n_namesz; /* Name size */
| __u32 n_descsz; /* Content size */
| __u32 n_type; /* NT_VMCOREDD */
| __u8 name[8]; /* LINUX\0\0\0 */
| __u8 dump_name[VMCOREDD_MAX_NAME_BYTES]; /* Device dump's name */
| };
.. we see that @name wants to be NUL-padded.
We're copying data->dump_name which is defined as:
| char dump_name[VMCOREDD_MAX_NAME_BYTES]; /* Unique name of the dump */
.. which shares the same size as vdd_hdr->dump_name. Let's make sure we
NUL-pad this as well.
Use strscpy_pad() which NUL-terminates and NUL-pads its destination
buffers. Specifically, use the new 2-argument version of strscpy_pad
introduced in Commit e6584c3964 ("string: Allow 2-argument
strscpy()").
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Link: https://lkml.kernel.org/r/20240401-strncpy-fs-proc-vmcore-c-v2-1-dd0a73f42635@google.com
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
