clang warns that one error message is too long for its destination buffer:
drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:1876:4: error: 'snprintf' will always be truncated; specified size is 80, but format string expands to at least 94 [-Werror,-Wformat-truncation-non-kprintf]
Reword it to be a bit shorter so it always fits.
Fixes: 70f0302b3f ("net/mlx5: Bridge, implement mdb offload")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20240326223825.4084412-5-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clang complains that the temporary string for the name passed into
alloc_workqueue() is too short for its contents:
drivers/net/ethernet/qlogic/qed/qed_main.c:1218:3: error: 'snprintf' will always be truncated; specified size is 16, but format string expands to at least 18 [-Werror,-Wformat-truncation]
There is no need for a temporary buffer, and the actual name of a workqueue
is 32 bytes (WQ_NAME_LEN), so just use the interface as intended to avoid
the truncation.
Fixes: 59ccf86fe6 ("qed: Add driver infrastucture for handling mfw requests.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240326223825.4084412-4-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As clang points out, the error message in enetc_setup_xdp_prog()
still does not fit in the buffer and will be truncated:
drivers/net/ethernet/freescale/enetc/enetc.c:2771:3: error: 'snprintf' will always be truncated; specified size is 80, but format string expands to at least 87 [-Werror,-Wformat-truncation]
Replace it with an even shorter message that should fit.
Fixes: f968c56417 ("net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240326223825.4084412-3-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Any NIX interface type can have maximum 256 channels. So increased the
backpressure ID count to 256 so that it can cover cn9k and cn10k SoCs that
have different NIX interface types with varied maximum channels.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
Link: https://lore.kernel.org/r/20240326184514.1628284-1-radhac@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the MTU of one of an attached interface becomes too small to transmit
the local translation table then it must be resized to fit inside all
fragments (when enabled) or a single packet.
But if the MTU becomes too low to transmit even the header + the VLAN
specific part then the resizing of the local TT will never succeed. This
can for example happen when the usable space is 110 bytes and 11 VLANs are
on top of batman-adv. In this case, at least 116 byte would be needed.
There will just be an endless spam of
batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110)
in the log but the function will never finish. Problem here is that the
timeout will be halved all the time and will then stagnate at 0 and
therefore never be able to reduce the table even more.
There are other scenarios possible with a similar result. The number of
BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too
high to fit inside a packet. Such a scenario can therefore happen also with
only a single VLAN + 7 non-purgable addresses - requiring at least 120
bytes.
While this should be handled proactively when:
* interface with too low MTU is added
* VLAN is added
* non-purgeable local mac is added
* MTU of an attached interface is reduced
* fragmentation setting gets disabled (which most likely requires dropping
attached interfaces)
not all of these scenarios can be prevented because batman-adv is only
consuming events without the the possibility to prevent these actions
(non-purgable MAC address added, MTU of an attached interface is reduced).
It is therefore necessary to also make sure that the code is able to handle
also the situations when there were already incompatible system
configuration are present.
Cc: stable@vger.kernel.org
Fixes: a19d3d85e1 ("batman-adv: limit local translation table max size")
Reported-by: syzbot+a6a4b5bb3da165594cff@syzkaller.appspotmail.com
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Balazs Scheidler says:
====================
Add IP/port information to UDP drop tracepoint
In our use-case we would like to recover the properties of dropped UDP
packets. Unfortunately the current udp_fail_queue_rcv_skb tracepoint
only exposes the port number of the receiving socket.
This patch-set will add the source/dest ip/port to the tracepoint, while
keeping the socket's local port as well for compatibility.
Thanks for the review comments by Jason and Kuniyuki, they helped me a lot
and I tried to address all of their comments in this new iteration.
====================
Link: https://lore.kernel.org/r/cover.1711475011.git.balazs.scheidler@axoflow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch moves TP_STORE_ADDR_PORTS_SKB() to a common header and removes
the TCP specific implementation details.
Previously the macro assumed the skb passed as an argument is a
TCP packet, the implementation now uses an argument to the L4 header and
uses that to extract the source/destination ports, which happen
to be named the same in "struct tcphdr" and "struct udphdr"
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Balazs Scheidler <balazs.scheidler@axoflow.com>
Link: https://lore.kernel.org/r/9e306f78260dfbbdc7353ba5f864cc027a409540.1711475011.git.balazs.scheidler@axoflow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop 'batadv_tt_local_entry_free_rcu()', 'batadv_tt_global_entry_free_rcu()'
and 'batadv_tt_orig_list_entry_free_rcu()' in favor of 'kfree_rcu()' in
'batadv_tt_local_entry_release()', 'batadv_tt_global_entry_release()' and
'batadv_tt_orig_list_entry_release()', respectively.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This version will contain all the (major or even only minor) changes for
Linux 6.10.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This updates the driver to gpiod API, and removes yet another use of
of_get_named_gpio().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326175836.1418718-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-26 (i40e)
This series contains updates to i40e driver only.
Ivan Vecera resolves an issue where descriptors could be missed when
exiting busy poll.
Aleksandr corrects counting of MAC filters to only include new or active
filters and resolves possible use of incorrect/stale 'vf' variable.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix vf may be used uninitialized in this function warning
i40e: fix i40e_count_filters() to count only active/new filters
i40e: Enforce software interrupt during busy-poll exit
====================
Link: https://lore.kernel.org/r/20240326162358.1224145-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original version of the mitigation would patch in the calls to the
untraining routines directly. That is, the alternative() in UNTRAIN_RET
will patch in the CALL to srso_alias_untrain_ret() directly.
However, even if commit e7c25c441e ("x86/cpu: Cleanup the untrain
mess") meant well in trying to clean up the situation, due to micro-
architectural reasons, the untraining routine srso_alias_untrain_ret()
must be the target of a CALL instruction and not of a JMP instruction as
it is done now.
Reshuffle the alternative macros to accomplish that.
Fixes: e7c25c441e ("x86/cpu: Cleanup the untrain mess")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the next upgrade to the Rust toolchain, from 1.76.0 to 1.77.1
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
The `offset_of` feature (single-field `offset_of!`) that we were using
got stabilized in Rust 1.77.0 [3].
Therefore, now the only unstable features allowed to be used outside the
`kernel` crate is `new_uninit`, though other code to be upstreamed may
increase the list.
Please see [4] for details.
# Required changes
Rust 1.77.0 merged the `unused_tuple_struct_fields` lint into `dead_code`,
thus upgrading it from `allow` to `warn` [5]. In turn, this made `rustc`
complain about the `ThisModule`'s pointer field being never read, but
the previous patch adds the `as_ptr` method to it, needed by Binder [6],
so that we do not need to locally `allow` it.
# Other changes
Rust 1.77.0 introduces the `--check-cfg` feature [7], for which there
is a Call for Testing going on [8]. We were requested to test it and
we found it useful [9] -- we will likely enable it in the future.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1770-2024-03-21 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/rust-lang/rust/pull/118799 [3]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [4]
Link: https://github.com/rust-lang/rust/pull/118297 [5]
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-2-08ba9197f637@google.com/#Z31rust:kernel:lib.rs [6]
Link: https://doc.rust-lang.org/nightly/unstable-book/compiler-flags/check-cfg.html [7]
Link: https://github.com/rust-lang/rfcs/pull/3013#issuecomment-1936648479 [8]
Link: https://github.com/rust-lang/rust/issues/82450#issuecomment-1947462977 [9]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240217002717.57507-1-ojeda@kernel.org
[ Upgraded to 1.77.1. Removed `allow(dead_code)` thanks to the previous
patch. Reworded accordingly. No changes to `alloc` during the beta. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Eric Woudstra says:
====================
Add en8811h phy driver and devicetree binding doc
This patch series adds the driver and the devicetree binding documentation
for the Airoha en8811h PHY.
====================
Link: https://lore.kernel.org/r/20240326162305.303598-1-ericwouds@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the driver for the Airoha EN8811H 2.5 Gigabit PHY. The phy supports
100/1000/2500 Mbps with auto negotiation only.
The driver uses two firmware files, for which updated versions are added to
linux-firmware already.
Note: At phy-address + 8 there is another device on the mdio bus, that
belongs to the EN881H. While the original driver writes to it, Airoha
has confirmed this is not needed. Therefore, communication with this
device is not included in this driver.
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326162305.303598-3-ericwouds@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the Airoha EN8811H 2.5 Gigabit PHY.
The en8811h phy can be set with serdes polarity reversed on rx and/or tx.
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240326162305.303598-2-ericwouds@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cp might be null, calling cp->cp_conn would produce null dereference
[Simon Horman adds:]
Analysis:
* cp is a parameter of __rds_rdma_map and is not reassigned.
* The following call-sites pass a NULL cp argument to __rds_rdma_map()
- rds_get_mr()
- rds_get_mr_for_dest
* Prior to the code above, the following assumes that cp may be NULL
(which is indicative, but could itself be unnecessary)
trans_private = rs->rs_transport->get_mr(
sg, nents, rs, &mr->r_key, cp ? cp->cp_conn : NULL,
args->vec.addr, args->vec.bytes,
need_odp ? ODP_ZEROBASED : ODP_NOT_NEEDED);
* The code modified by this patch is guarded by IS_ERR(trans_private),
where trans_private is assigned as per the previous point in this analysis.
The only implementation of get_mr that I could locate is rds_ib_get_mr()
which can return an ERR_PTR if the conn (4th) argument is NULL.
* ret is set to PTR_ERR(trans_private).
rds_ib_get_mr can return ERR_PTR(-ENODEV) if the conn (4th) argument is NULL.
Thus ret may be -ENODEV in which case the code in question will execute.
Conclusion:
* cp may be NULL at the point where this patch adds a check;
this patch does seem to address a possible bug
Fixes: c055fc00c0 ("net/rds: fix WARNING in rds_conn_connect_if_down")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326153132.55580-1-mngyadam@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The switch has 4 ports with 2 internal PHYs, but ports are numbered up
to 6, with ports 0, 1, 5 and 6 being usable.
Fixes: 71d94a432a ("net: dsa: mv88e6xxx: add support for MV88E6020 switch")
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326123655.40666-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Revert thermal core optimization that introduced a functional issue
causing a critical trip point to be crossed in some cases (Daniel
Lezcano).
- Add missing conversion between different state ranges to the
devfreq cooling device driver (Ye Zhang).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmYHBtMSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx9PUP/3Fj6pk2ibvesE9ixcDcLcP0E614RsB9
nGtS5819Kzw++4rqbHCq9USqxumtp28b/B+zZim39AmOKdKvtX3cz9XXZQpq95Va
1H8I0unAQwHmviPG9ZLBOLm6zdGdbbsFFUYctH0dhHt9epMNTAwFUSf4CUek0gxA
V/73KDCIqjR1boapaPyIeGD25TvlSipvQBzHdu476SK4DA0rUvmyl1XLVz1sg3UJ
Xvwig9za4TlemuTn+1g7192OIWcG67locfMlEjS+18rkbABARUWdnDbm8zH5N2PF
geetn9ukbFkFmShUCGR6h40lHpkcxI/8WEht7nNVn2AGImr1eIbcPoFjYlcf/6/a
ttAT/qof/d4/uy0clYObMXrFRkCExsI9U3+rZ/TnN0fGmr90mSjAAwSyPdDVNYSg
ksZlLojvrvCkdWYjtewr0ONbCJmADT3LnD+VsXQq0hUlMWXQndGLXHn5RzzCHIZa
oEdlnCYQjnvdZNk2rdMgxaAxGg1vIKWl5TccUl9tWDJz9m1qh8d+6lL75AnsiYjR
zuwD2MIO/WXpEFbEZeSv0DNJY2djIrYXakZjLnf+OlzoykZOqJ9vAXk2r4hxAqd0
yk9DmLWd9QBWLQTsiGiWp95bmI9qDYs1lC5MIEM7xKiJzjth1lwzxB7SkbaR/UyB
HrOKLgQloOoa
=8O09
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These revert a problematic optimization commit and address a devfreq
cooling device issue.
Specifics:
- Revert thermal core optimization that introduced a functional issue
causing a critical trip point to be crossed in some cases (Daniel
Lezcano)
- Add missing conversion between different state ranges to the
devfreq cooling device driver (Ye Zhang)"
* tag 'thermal-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: devfreq_cooling: Fix perf state when calculate dfc res_util
Revert "thermal: core: Don't update trip points inside the hysteresis range"
- Drop __exit annotation from einj_remove() in the ACPI APEI code
because this function can be called during runtime (Arnd Bergmann).
- Make acpi_db_walk_for_fields() check acpi_evaluate_object() return
value to avoid accessing memory that has been freed (Nikita
Kiryushin).
-----BEGIN PGP SIGNATURE-----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=ptc4
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two issues that may lead to attempts to use memory that has
been freed already.
Specifics:
- Drop __exit annotation from einj_remove() in the ACPI APEI code
because this function can be called during runtime (Arnd Bergmann)
- Make acpi_db_walk_for_fields() check acpi_evaluate_object() return
value to avoid accessing memory that has been freed (Nikita
Kiryushin)"
* tag 'acpi-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()
ACPI: APEI: EINJ: mark remove callback as non-__exit
syzbot reported the following lock sequence:
cpu 2:
grabs timer_base lock
spins on bpf_lpm lock
cpu 1:
grab rcu krcp lock
spins on timer_base lock
cpu 0:
grab bpf_lpm lock
spins on rcu krcp lock
bpf_lpm lock can be the same.
timer_base lock can also be the same due to timer migration.
but rcu krcp lock is always per-cpu, so it cannot be the same lock.
Hence it's a false positive.
To avoid lockdep complaining move kfree_rcu() after spin_unlock.
Reported-by: syzbot+1fa663a2100308ab6eab@syzkaller.appspotmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240329171439.37813-1-alexei.starovoitov@gmail.com
The code wasn't exactly wrong, but it was very odd, and it used
FOLL_FORCE together with FOLL_WRITE when it really didn't need to (it
only set FOLL_WRITE for writable mappings, so then the FOLL_FORCE was
pointless).
It also pointlessly called __get_user_pages() even when it knew it
wouldn't populate anything because the vma wasn't accessible and it
explicitly tested for and did *not* set FOLL_FORCE for inaccessible
vma's.
This code does need to use FOLL_FORCE, because we want to do fault in
writable shared mappings, but then the mapping may not actually be
readable. And we don't want to use FOLL_WRITE (which would match the
permission of the vma), because that would also dirty the pages, which
we don't want to do.
For very similar reasons, FOLL_FORCE populates a executable-only mapping
with no read permissions. We don't have a FOLL_EXEC flag.
Yes, it would probably be cleaner to split FOLL_WRITE into two bits (for
separate permission and dirty bit handling), and add a FOLL_EXEC flag
for the "GUP executable page" case. That would allow us to avoid
FOLL_FORCE entirely here.
But that's not how our FOLL_xyz bits have traditionally worked, and that
would be a much bigger patch.
So this at least avoids the FOLL_FORCE | FOLL_WRITE combination that
made one of my experimental validation patches trigger a warning. That
warning was a false positive (and my experimental patch was incomplete
anyway), but it all made me look at this and decide to clean at least
this small case up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allows you to get a raw pointer to THIS_MODULE for use in unsafe
code. The Rust Binder RFC uses it when defining fops for the binderfs
component [1].
This doesn't really need to go in now - it could go in together with
Rust Binder like how it is sent in the Rust Binder RFC. However, the
upcoming 1.77.0 release of the Rust compiler introduces a new warning,
and applying this patch now will silence that warning. That allows us to
avoid adding the #[allow(dead_code)] annotation seen in [2].
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-2-08ba9197f637@google.com/ [1]
Link: https://lore.kernel.org/all/20240217002717.57507-1-ojeda@kernel.org/ [2]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240226-module-as-ptr-v1-1-83bc89213113@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This reverts commit 29a43dc130.
29a43dc130 ("PCI: Mark LSI FW643 to avoid bus reset") by Edmund was based
on the assumption that the LSI / Agere FW643 has a defect such that it
can't recover after a Secondary Bus Reset (SBR).
But Takashi Sakamoto reported that SBR works fine on this same FW643 device
in an AMD Ryzen 5 2400G system, so apparently there is some other aspect of
Edmund's system that accounts for the issue.
The down side of 29a43dc130 is that when the FW643 is assigned to a VM,
avoiding the SBR means we leak data out of the VM.
Revert 29a43dc130 until we figure out a better solution. In the
meantime, we can use the sysfs "reset_method" interface to restrict the
available reset methods.
Link: https://lore.kernel.org/r/20240328212302.1582483-1-helgaas@kernel.org
Fixes: 29a43dc130 ("PCI: Mark LSI FW643 to avoid bus reset")
Reported-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20240325012135.36861-1-o-takashi@sakamocchi.jp
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
- Revert to the old initrd memory allocation soft limit of INT_MAX,
which was dropped inadvertently
- Ensure that startup_32() is entered with a valid boot_params pointer
when using the new EFI mixed mode protocol
- Fix a compiler warning introduced by a fix from the previous PR
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZgWMHgAKCRAwbglWLn0t
XI8TAQDVLH0N1DKirQk9LzOP1oVIoEwhUWaPK/kD+8b0lO9cRAEA9IQSPIGXM4d3
X1Gd7eZDojNOew+birQjGsWyPu1CuAk=
=YlEy
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"These address all the outstanding EFI/x86 boot related regressions:
- Revert to the old initrd memory allocation soft limit of INT_MAX,
which was dropped inadvertently
- Ensure that startup_32() is entered with a valid boot_params
pointer when using the new EFI mixed mode protocol
- Fix a compiler warning introduced by a fix from the previous pull"
* tag 'efi-fixes-for-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Reinstate soft limit for initrd loading
efi/libstub: Cast away type warning in use of max()
x86/efistub: Add missing boot_params for mixed mode compat entry
-----BEGIN PGP SIGNATURE-----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=zEIA
-----END PGP SIGNATURE-----
Merge tag 'block-6.9-20240329' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Small round of minor fixes or cleanups for the 6.9-rc2 kernel, one
fixing an issue introduced in 6.8"
* tag 'block-6.9-20240329' of git://git.kernel.dk/linux:
block: Do not force full zone append completion in req_bio_endio()
block: don't reject too large max_user_sectors in blk_validate_limits
block: Make blk_rq_set_mixed_merge() static
Fix warnings reported by smatch by initializing local 'ret' variable
to 0.
drivers/base/regmap/regcache-maple.c:186 regcache_maple_drop()
error: uninitialized symbol 'ret'.
drivers/base/regmap/regcache-maple.c:290 regcache_maple_sync()
error: uninitialized symbol 'ret'.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f033c26de5 ("regmap: Add maple tree based register cache")
Link: https://lore.kernel.org/r/20240329144630.1965159-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- fix a procfs failure when requesting an interrupt with a label containing
the '/' character
- add missing stubs for GPIO lookup functions for !GPIOLIB
- fix debug messages that would print "(null)" for NULL strings
-----BEGIN PGP SIGNATURE-----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=yU+H
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a procfs failure when requesting an interrupt with a label
containing the '/' character
- add missing stubs for GPIO lookup functions for !GPIOLIB
- fix debug messages that would print "(null)" for NULL strings
* tag 'gpio-fixes-for-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix debug messaging in gpiod_find_and_request()
gpiolib: Add stubs for GPIO lookup functions
gpio: cdev: sanitize the label before requesting the interrupt
The resolve_pseudo_ldimm64() function might have leaked file
descriptors when BPF_MAP_TYPE_ARENA was used in a program (some
error paths missed a corresponding fdput). Add missing fdputs.
v2:
remove unrelated changes from the fix
Fixes: 6082b6c328 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240329071106.67968-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Playing 4K media with 59.94 fractional rate (typically VP9) causes the screen to lose
sync with the following error reported in the system log:
[ 89.610280] Fatal Error, invalid HDMI vclk freq 593406
Modetest shows the following:
3840x2160 59.94 3840 4016 4104 4400 2160 2168 2178 2250 593407 flags: xxxx, xxxx,
drm calculated value -------------------------------------^
Change the fractional rate calculation to stop DIV_ROUND_CLOSEST rounding down which
results in vclk freq failing to match correctly.
Fixes: e5fab2ec9c ("drm/meson: vclk: add support for YUV420 setup")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240109230704.4120561-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109230704.4120561-1-christianshewitt@gmail.com
Move code around to get rid of forward declarations. No functional
changes.
After a plain code juggling, checkpatch reported:
total: 0 errors, 7 warnings, 12 checks, 1581 lines checked
so while at it let's address old issues as well. Should we ever address
the remaining unnecessary forward declarations within
drivers/net/ethernet/intel/, consider this change as a starting
point/reference.
As reported in [0], there would be a lot more of work to do...if we
care.
[0]: https://lore.kernel.org/intel-wired-lan/Zeh8qadiTGf413YU@boxer/T/#u
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Following the corresponding discussion [1] and [2] refactor the 'igc_open'
method and avoid taking the rtnl_lock() during the 'igc_resume' method.
The rtnl_lock is held by the upper layer and could lead to the deadlock
during resuming from a runtime power management flow. Notify the stack of
the actual queue counts 'netif_set_real_num_*_queues' outside the
'_igc_open' wrapper. This notification doesn't have to be called on each
resume.
Test:
1. Disconnect the ethernet cable
2. Enable the runtime power management via file system:
echo auto > /sys/devices/pci0000\.../power/control
3. Check the device state (lspci -s <device> -vvv | grep -i Status)
Link: https://lore.kernel.org/netdev/20231206113934.8d7819857574.I2deb5804
ef1739a2af307283d320ef7d82456494@changeid/#r [1]
Link: https://lore.kernel.org/netdev/20211125074949.5f897431@kicinski-fedo
ra-pc1c0hjn.dhcp.thefacebook.com/t/ [2]
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Switch the Intel networking drivers to use the new power management ops
declaration formats and macros, which allows us to drop __maybe_unused,
as well as a bunch of ifdef checking CONFIG_PM.
This is safe to do because the compiler drops the unused functions,
verified by checking for any of the power management function symbols
being present in System.map for a build without CONFIG_PM.
If a driver has runtime PM, define the ops with pm_ptr(), and if the
driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of
the macros for declaring the members of the pm_ops structs.
Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on
x64_64.
Reviewed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The igb driver was pre-declaring tons of functions just so that it could
have an early declaration of the pci_driver struct.
Delete a bunch of the declarations and move the struct to the bottom of the
file, after all the functions are declared.
Reviewed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The mlxbf_gige driver intermittantly encounters a NULL pointer
exception while the system is shutting down via "reboot" command.
The mlxbf_driver will experience an exception right after executing
its shutdown() method. One example of this exception is:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000011d373000
[0000000000000070] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
CPU: 0 PID: 13 Comm: ksoftirqd/0 Tainted: G S OE 5.15.0-bf.6.gef6992a #1
Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.0.2.12669 Apr 21 2023
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige]
lr : mlxbf_gige_poll+0x54/0x160 [mlxbf_gige]
sp : ffff8000080d3c10
x29: ffff8000080d3c10 x28: ffffcce72cbb7000 x27: ffff8000080d3d58
x26: ffff0000814e7340 x25: ffff331cd1a05000 x24: ffffcce72c4ea008
x23: ffff0000814e4b40 x22: ffff0000814e4d10 x21: ffff0000814e4128
x20: 0000000000000000 x19: ffff0000814e4a80 x18: ffffffffffffffff
x17: 000000000000001c x16: ffffcce72b4553f4 x15: ffff80008805b8a7
x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101
x11: 7f7f7f7f7f7f7f7f x10: c2ac898b17576267 x9 : ffffcce720fa5404
x8 : ffff000080812138 x7 : 0000000000002e9a x6 : 0000000000000080
x5 : ffff00008de3b000 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige]
mlxbf_gige_poll+0x54/0x160 [mlxbf_gige]
__napi_poll+0x40/0x1c8
net_rx_action+0x314/0x3a0
__do_softirq+0x128/0x334
run_ksoftirqd+0x54/0x6c
smpboot_thread_fn+0x14c/0x190
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
Code: 8b070000 f9000ea0 f95056c0 f86178a1 (b9407002)
---[ end trace 7cc3941aa0d8e6a4 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Kernel Offset: 0x4ce722520000 from 0xffff800008000000
PHYS_OFFSET: 0x80000000
CPU features: 0x000005c1,a3330e5a
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
During system shutdown, the mlxbf_gige driver's shutdown() is always executed.
However, the driver's stop() method will only execute if networking interface
configuration logic within the Linux distribution has been setup to do so.
If shutdown() executes but stop() does not execute, NAPI remains enabled
and this can lead to an exception if NAPI is scheduled while the hardware
interface has only been partially deinitialized.
The networking interface managed by the mlxbf_gige driver must be properly
stopped during system shutdown so that IFF_UP is cleared, the hardware
interface is put into a clean state, and NAPI is fully deinitialized.
Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20240325210929.25362-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
af_unix: Rework GC.
When we pass a file descriptor to an AF_UNIX socket via SCM_RIGTHS,
the underlying struct file of the inflight fd gets its refcount bumped.
If the fd is of an AF_UNIX socket, we need to track it in case it forms
cyclic references.
Let's say we send a fd of AF_UNIX socket A to B and vice versa and
close() both sockets.
When created, each socket's struct file initially has one reference.
After the fd exchange, both refcounts are bumped up to 2. Then, close()
decreases both to 1. From this point on, no one can touch the file/socket.
However, the struct file has one refcount and thus never calls the
release() function of the AF_UNIX socket.
That's why we need to track all inflight AF_UNIX sockets and run garbage
collection.
This series replaces the current GC implementation that locks each inflight
socket's receive queue and requires trickiness in other places.
The new GC does not lock each socket's queue to minimise its effect and
tries to be lightweight if there is no cyclic reference or no update in
the shape of the inflight fd graph.
The new implementation is based on Tarjan's Strongly Connected Components
algorithm, and we will consider each inflight AF_UNIX socket as a vertex
and its file descriptor as an edge in a directed graph.
For the details, please see each patch.
patch 1 - 3 : Add struct to express inflight socket graphs
patch 4 : Optimse inflight fd counting
patch 5 - 6 : Group SCC possibly forming a cycle
patch 7 - 8 : Support embryo socket
patch 9 - 11 : Make GC lightweight
patch 12 - 13 : Detect dead cycle references
patch 14 : Replace GC algorithm
patch 15 : selftest
After this series is applied, we can remove the two ugly tricks for race,
scm_fp_dup() in unix_attach_fds() and spin_lock dance in unix_peek_fds()
as done in patch 14/15 of v1.
Also, we will add cond_resched_lock() in __unix_gc() and convert it to
use a dedicated kthread instead of global system workqueue as suggested
by Paolo in a v4 thread.
v4: https://lore.kernel.org/netdev/20240301022243.73908-1-kuniyu@amazon.com/
v3: https://lore.kernel.org/netdev/20240223214003.17369-1-kuniyu@amazon.com/
v2: https://lore.kernel.org/netdev/20240216210556.65913-1-kuniyu@amazon.com/
v1: https://lore.kernel.org/netdev/20240203030058.60750-1-kuniyu@amazon.com/
====================
Link: https://lore.kernel.org/r/20240325202425.60930-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds test cases to verify the new GC.
We run each test for the following cases:
* SOCK_DGRAM
* SOCK_STREAM without embryo socket
* SOCK_STREAM without embryo socket + MSG_OOB
* SOCK_STREAM with embryo sockets
* SOCK_STREAM with embryo sockets + MSG_OOB
Before and after running each test case, we ensure that there is
no AF_UNIX socket left in the netns by reading /proc/net/protocols.
We cannot use /proc/net/unix and UNIX_DIAG because the embryo socket
does not show up there.
Each test creates multiple sockets in an array. We pass sockets in
the even index using the peer sockets in the odd index.
So, send_fd(0, 1) actually sends fd[0] to fd[2] via fd[0 + 1].
Test 1 : A <-> A
Test 2 : A <-> B
Test 3 : A -> B -> C <- D
^.___|___.' ^
`---------'
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-16-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we find a dead SCC during iteration, we call unix_collect_skb()
to splice all skb in the SCC to the global sk_buff_head, hitlist.
After iterating all SCC, we unlock unix_gc_lock and purge the queue.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-15-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When iterating SCC, we call unix_vertex_dead() for each vertex
to check if the vertex is close()d and has no bridge to another
SCC.
If both conditions are true for every vertex in SCC, we can
execute garbage collection for all skb in the SCC.
The actual garbage collection is done in the following patch,
replacing the old implementation.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-14-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The definition of the lowlink in Tarjan's algorithm is the
smallest index of a vertex that is reachable with at most one
back-edge in SCC. This is not useful for a cross-edge.
If we start traversing from A in the following graph, the final
lowlink of D is 3. The cross-edge here is one between D and C.
A -> B -> D D = (4, 3) (index, lowlink)
^ | | C = (3, 1)
| V | B = (2, 1)
`--- C <--' A = (1, 1)
This is because the lowlink of D is updated with the index of C.
In the following patch, we detect a dead SCC by checking two
conditions for each vertex.
1) vertex has no edge directed to another SCC (no bridge)
2) vertex's out_degree is the same as the refcount of its file
If 1) is false, there is a receiver of all fds of the SCC and
its ancestor SCC.
To evaluate 1), we need to assign a unique index to each SCC and
assign it to all vertices in the SCC.
This patch changes the lowlink update logic for cross-edge so
that in the example above, the lowlink of D is updated with the
lowlink of C.
A -> B -> D D = (4, 1) (index, lowlink)
^ | | C = (3, 1)
| V | B = (2, 1)
`--- C <--' A = (1, 1)
Then, all vertices in the same SCC have the same lowlink, and we
can quickly find the bridge connecting to different SCC if exists.
However, it is no longer called lowlink, so we rename it to
scc_index. (It's sometimes called lowpoint.)
Also, we add a global variable to hold the last index used in DFS
so that we do not reset the initial index in each DFS.
This patch can be squashed to the SCC detection patch but is
split deliberately for anyone wondering why lowlink is not used
as used in the original Tarjan's algorithm and many reference
implementations.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240325202425.60930-13-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
