Also add a corresponding label so overlays can reference that node.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
NPi i.MX6ULL eMMC/NAND is Seed Studios SoM using i.MX6ULL.
Development baords can be either based on NAND or eMMC
SoM.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for Seed Stuidos NPi i.MX6ULL SoM equipped with
512MB RAM and 8GB eMMC or 512MB NAND flash. Development
board comes with either eMMC or NAND based SoM with peripheral
interfaces like 2 x ethernet, 2 x USB, LCD, CSI and more.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The current implementation for loading coalesced KPU profiles has
a limitation. The "offset" field, which is used to locate profiles
within the profile is restricted to a u16.
This restricts the number of profiles that can be loaded. This patch
addresses this limitation by increasing the size of the "offset" field.
Fixes: 11c730bfbf ("octeontx2-af: support for coalescing KPU profiles")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart says:
====================
gro: various fixes related to UDP tunnels
We found issues when a UDP tunnel endpoint is in a different netns than
where UDP GRO happens. This kind of setup is actually quite diverse,
from having one leg of the tunnel on a remove host, to having a tunnel
between netns (eg. being bridged in another one or on the host). In our
case that UDP tunnel was geneve.
UDP tunnel packets should not be GROed at the UDP level. The fundamental
issue here is such packet can't be detected in a foolproof way: we can't
know by looking at a packet alone and the current logic of looking up
UDP sockets is fragile (socket could be in another netns, packet could
be modified in between, etc). Because there is no way to make the GRO
code to correctly handle those packets in all cases, this series aims at
two things: making the net stack to correctly behave (as in, no crash
and no invalid packet) when such thing happens, and in some cases to
prevent this "early GRO" from happening.
First three patches fix issues when an "UDP tunneled" packet is being
GROed too early by rx-udp-gro-forwarding or rx-gro-list.
Last patch is preventing locally generated UDP tunnel packets from being
GROed. This turns out to be more complex than this patch alone as it
relies on skb->encapsulation which is currently untrusty in some cases
(see iptunnel_handle_offloads); but that should fix things in practice
and is acceptable for a fix. Future work is required to improve things
(prevent all locally generated UDP tunnel packets from being GROed),
such as fixing the misuse of skb->encapsulation in drivers; but that
would be net-next material.
Thanks!
Antoine
Since v3:
- Fixed the udpgro_fwd selftest in patch 5 (Jakub Kicinski feedback).
- Improved commit message on patch 3 (Willem de Bruijn feeback).
Since v2:
- Fixed a build issue with IPv6=m in patch 1 (Jakub Kicinski
feedback).
- Fixed typo in patch 1 (Nikolay Aleksandrov feedback).
- Added Reviewed-by tag on patch 2 (Willem de Bruijn feeback).
- Added back conversion to CHECKSUM_UNNECESSARY but only from non
CHECKSUM_PARTIAL in patch 3 (Paolo Abeni & Willem de Bruijn
feeback).
- Reworded patch 3 commit msg.
Since v1:
- Fixed a build issue with IPv6 disabled in patch 1.
- Reworked commit log in patch 2 (Willem de Bruijn feedback).
- Added Reviewed-by tags on patches 1 & 4 (Willem de Bruijn feeback).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP tunnel packets can't be GRO in-between their endpoints as this
causes different issues. The UDP GRO fwd vxlan tests were relying on
this and their expectations have to be fixed.
We keep both vxlan tests and expected no GRO from happening. The vxlan
UDP GRO bench test was removed as it's not providing any valuable
information now.
Fixes: a062260a9d ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
GRO has a fundamental issue with UDP tunnel packets as it can't detect
those in a foolproof way and GRO could happen before they reach the
tunnel endpoint. Previous commits have fixed issues when UDP tunnel
packets come from a remote host, but if those packets are issued locally
they could run into checksum issues.
If the inner packet has a partial checksum the information will be lost
in the GRO logic, either in udp4/6_gro_complete or in
udp_gro_complete_segment and packets will have an invalid checksum when
leaving the host.
Prevent local UDP tunnel packets from ever being GROed at the outer UDP
level.
Due to skb->encapsulation being wrongly used in some drivers this is
actually only preventing UDP tunnel packets with a partial checksum to
be GROed (see iptunnel_handle_offloads) but those were also the packets
triggering issues so in practice this should be sufficient.
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Fixes: 36707061d6 ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP GRO validates checksums and in udp4/6_gro_complete fraglist packets
are converted to CHECKSUM_UNNECESSARY to avoid later checks. However
this is an issue for CHECKSUM_PARTIAL packets as they can be looped in
an egress path and then their partial checksums are not fixed.
Different issues can be observed, from invalid checksum on packets to
traces like:
gen01: hw csum failure
skb len=3008 headroom=160 headlen=1376 tailroom=0
mac=(106,14) net=(120,40) trans=160
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0xffff232e ip_summed=2 complete_sw=0 valid=0 level=0)
hash(0x77e3d716 sw=1 l4=1) proto=0x86dd pkttype=0 iif=12
...
Fix this by only converting CHECKSUM_NONE packets to
CHECKSUM_UNNECESSARY by reusing __skb_incr_checksum_unnecessary. All
other checksum types are kept as-is, including CHECKSUM_COMPLETE as
fraglist packets being segmented back would have their skb->csum valid.
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If packets are GROed with fraglist they might be segmented later on and
continue their journey in the stack. In skb_segment_list those skbs can
be reused as-is. This is an issue as their destructor was removed in
skb_gro_receive_list but not the reference to their socket, and then
they can't be orphaned. Fix this by also removing the reference to the
socket.
For example this could be observed,
kernel BUG at include/linux/skbuff.h:3131! (skb_orphan)
RIP: 0010:ip6_rcv_core+0x11bc/0x19a0
Call Trace:
ipv6_list_rcv+0x250/0x3f0
__netif_receive_skb_list_core+0x49d/0x8f0
netif_receive_skb_list_internal+0x634/0xd40
napi_complete_done+0x1d2/0x7d0
gro_cell_poll+0x118/0x1f0
A similar construction is found in skb_gro_receive, apply the same
change there.
Fixes: 5e10da5385 ("skbuff: allow 'slow_gro' for skb carring sock reference")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When rx-udp-gro-forwarding is enabled UDP packets might be GROed when
being forwarded. If such packets might land in a tunnel this can cause
various issues and udp_gro_receive makes sure this isn't the case by
looking for a matching socket. This is performed in
udp4/6_gro_lookup_skb but only in the current netns. This is an issue
with tunneled packets when the endpoint is in another netns. In such
cases the packets will be GROed at the UDP level, which leads to various
issues later on. The same thing can happen with rx-gro-list.
We saw this with geneve packets being GROed at the UDP level. In such
case gso_size is set; later the packet goes through the geneve rx path,
the geneve header is pulled, the offset are adjusted and frag_list skbs
are not adjusted with regard to geneve. When those skbs hit
skb_fragment, it will misbehave. Different outcomes are possible
depending on what the GROed skbs look like; from corrupted packets to
kernel crashes.
One example is a BUG_ON[1] triggered in skb_segment while processing the
frag_list. Because gso_size is wrong (geneve header was pulled)
skb_segment thinks there is "geneve header size" of data in frag_list,
although it's in fact the next packet. The BUG_ON itself has nothing to
do with the issue. This is only one of the potential issues.
Looking up for a matching socket in udp_gro_receive is fragile: the
lookup could be extended to all netns (not speaking about performances)
but nothing prevents those packets from being modified in between and we
could still not find a matching socket. It's OK to keep the current
logic there as it should cover most cases but we also need to make sure
we handle tunnel packets being GROed too early.
This is done by extending the checks in udp_unexpected_gso: GSO packets
lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must
be segmented.
[1] kernel BUG at net/core/skbuff.c:4408!
RIP: 0010:skb_segment+0xd2a/0xf70
__udp_gso_segment+0xaa/0x560
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Fixes: 36707061d6 ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In most meson systems, multiple PLLs are present, making it difficult to
identify the specific PLL that fails to lock. To address this issue,
print out the name of the PLL that cannot be locked.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Link: https://lore.kernel.org/r/20240328195733.30572-1-ddrokosov@salutedevices.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
When the max_register value is not set, the regmap debugfs 'registers'
file does not display the entire range of the regmap.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Link: https://lore.kernel.org/r/20240320155512.3544-5-ddrokosov@salutedevices.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
When the max_register value is not set, the regmap debugfs 'registers'
file does not display the entire range of the regmap.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Link: https://lore.kernel.org/r/20240320155512.3544-4-ddrokosov@salutedevices.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
When the max_register value is not set, the regmap debugfs 'registers'
file does not display the entire range of the regmap.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Link: https://lore.kernel.org/r/20240320155512.3544-3-ddrokosov@salutedevices.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
When the max_register value is not set, the regmap debugfs 'registers'
file does not display the entire range of the regmap.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Link: https://lore.kernel.org/r/20240320155512.3544-2-ddrokosov@salutedevices.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
As of commit 916444df30 ("ptp: deprecate gettime64() in favor of
gettimex64()") (new) PTP drivers should rather implement gettimex64().
In addition, this variant provides timestamps from the system clock. The
readings have to be recorded right before and after reading the lowest bits
of the PHC timestamp.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up till now only single character ('A' or 'B') was used to provide
information of HSR slave network device status.
As it is also possible and valid, that Interlink network device may
be supported as well, the description must be more verbose. As a result
the full string description is now used.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_hash_sk and smc_unhash_sk are only used in af_smc.c, so make them
static and remove the output symbol. They can be called under the path
.prot->hash()/unhash().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Asbjørn Sloth Tønnesen says:
====================
make skip_sw actually skip software
During development of flower-route[1], which I
recently presented at FOSDEM[2], I noticed that
CPU usage, would increase the more rules I installed
into the hardware for IP forwarding offloading.
Since we use TC flower offload for the hottest
prefixes, and leave the long tail to the normal (non-TC)
Linux network stack for slow-path IP forwarding.
We therefore need both the hardware and software
datapath to perform well.
I found that skip_sw rules, are quite expensive
in the kernel datapath, since they must be evaluated
and matched upon, before the kernel checks the
skip_sw flag.
This patchset optimizes the case where all rules
are skip_sw, by implementing a TC bypass for these
cases, where TC is only used as a control plane
for the hardware path.
v4:
- Rebased onto net-next, now that net-next is open again
v3: https://lore.kernel.org/netdev/20240306165813.656931-1-ast@fiberby.net/
- Patch 3:
- Fix source_inline
- Fix build failure, when CONFIG_NET_CLS without CONFIG_NET_CLS_ACT.
v2: https://lore.kernel.org/netdev/20240305144404.569632-1-ast@fiberby.net/
- Patch 1:
- Add Reviewed-By from Jiri Pirko
- Patch 2:
- Move code, to avoid forward declaration (Jiri).
- Patch 3
- Refactor to use a static key.
- Add performance data for trapping, or sending
a packet to a non-existent chain (as suggested by Marcelo).
v1: https://lore.kernel.org/netdev/20240215160458.1727237-1-ast@fiberby.net/
[1] flower-route
https://github.com/fiberby-dk/flower-route
[2] FOSDEM talk
https://fosdem.org/2024/schedule/event/fosdem-2024-3337-flying-higher-hardware-offloading-with-bird/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
TC filters come in 3 variants:
- no flag (try to process in hardware, but fallback to software))
- skip_hw (do not process filter by hardware)
- skip_sw (do not process filter by software)
However skip_sw is implemented so that the skip_sw
flag can first be checked, after it has been matched.
IMHO it's common when using skip_sw, to use it on all rules.
So if all filters in a block is skip_sw filters, then
we can bail early, we can thus avoid having to match
the filters, just to check for the skip_sw flag.
This patch adds a bypass, for when only TC skip_sw rules
are used. The bypass is guarded by a static key, to avoid
harming other workloads.
There are 3 ways that a packet from a skip_sw ruleset, can
end up in the kernel path. Although the send packets to a
non-existent chain way is only improved a few percents, then
I believe it's worth optimizing the trap and fall-though
use-cases.
+----------------------------+--------+--------+--------+
| Test description | Pre- | Post- | Rel. |
| | kpps | kpps | chg. |
+----------------------------+--------+--------+--------+
| basic forwarding + notrack | 3589.3 | 3587.9 | 1.00x |
| switch to eswitch mode | 3081.8 | 3094.7 | 1.00x |
| add ingress qdisc | 3042.9 | 3063.6 | 1.01x |
| tc forward in hw / skip_sw |37024.7 |37028.4 | 1.00x |
| tc forward in sw / skip_hw | 3245.0 | 3245.3 | 1.00x |
+----------------------------+--------+--------+--------+
| tests with only skip_sw rules below: |
+----------------------------+--------+--------+--------+
| 1 non-matching rule | 2694.7 | 3058.7 | 1.14x |
| 1 n-m rule, match trap | 2611.2 | 3323.1 | 1.27x |
| 1 n-m rule, goto non-chain | 2886.8 | 2945.9 | 1.02x |
| 5 non-matching rules | 1958.2 | 3061.3 | 1.56x |
| 5 n-m rules, match trap | 1911.9 | 3327.0 | 1.74x |
| 5 n-m rules, goto non-chain| 2883.1 | 2947.5 | 1.02x |
| 10 non-matching rules | 1466.3 | 3062.8 | 2.09x |
| 10 n-m rules, match trap | 1444.3 | 3317.9 | 2.30x |
| 10 n-m rules,goto non-chain| 2883.1 | 2939.5 | 1.02x |
| 25 non-matching rules | 838.5 | 3058.9 | 3.65x |
| 25 n-m rules, match trap | 824.5 | 3323.0 | 4.03x |
| 25 n-m rules,goto non-chain| 2875.8 | 2944.7 | 1.02x |
| 50 non-matching rules | 488.1 | 3054.7 | 6.26x |
| 50 n-m rules, match trap | 484.9 | 3318.5 | 6.84x |
| 50 n-m rules,goto non-chain| 2884.1 | 2939.7 | 1.02x |
+----------------------------+--------+--------+--------+
perf top (25 n-m skip_sw rules - pre patch):
20.39% [kernel] [k] __skb_flow_dissect
16.43% [kernel] [k] rhashtable_jhash2
10.58% [kernel] [k] fl_classify
10.23% [kernel] [k] fl_mask_lookup
4.79% [kernel] [k] memset_orig
2.58% [kernel] [k] tcf_classify
1.47% [kernel] [k] __x86_indirect_thunk_rax
1.42% [kernel] [k] __dev_queue_xmit
1.36% [kernel] [k] nft_do_chain
1.21% [kernel] [k] __rcu_read_lock
perf top (25 n-m skip_sw rules - post patch):
5.12% [kernel] [k] __dev_queue_xmit
4.77% [kernel] [k] nft_do_chain
3.65% [kernel] [k] dev_gro_receive
3.41% [kernel] [k] check_preemption_disabled
3.14% [kernel] [k] mlx5e_skb_from_cqe_mpwrq_nonlinear
2.88% [kernel] [k] __netif_receive_skb_core.constprop.0
2.49% [kernel] [k] mlx5e_xmit
2.15% [kernel] [k] ip_forward
1.95% [kernel] [k] mlx5e_tc_restore_tunnel
1.92% [kernel] [k] vlan_gro_receive
Test setup:
DUT: Intel Xeon D-1518 (2.20GHz) w/ Nvidia/Mellanox ConnectX-6 Dx 2x100G
Data rate measured on switch (Extreme X690), and DUT connected as
a router on a stick, with pktgen and pktsink as VLANs.
Pktgen-dpdk was in range 36.6-37.7 Mpps 64B packets across all tests.
Full test data at https://files.fiberby.net/ast/2024/tc_skip_sw/v2_tests/
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maintain a count of filters per block.
Counter updates are protected by cb_lock, which is
also used to protect the offload counters.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maintain a count of skip_sw filters.
This counter is protected by the cb_lock, and is updated
at the same time as offloadcnt.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Work around a quirk in a few old (2011-ish) UEFI implementations, where
a call to `GetNextVariableName` with a buffer size larger than 512 bytes
will always return EFI_INVALID_PARAMETER.
This was already done to efivarfs in commit f45812cc23 ("efivarfs:
Request at most 512 bytes for variable names"), but the second copy of
the variable iteration implementation was overlooked.
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Since we put dvc_tlv static variable to a header file it's copied to
each module that includes the header. But not all of them are actually
used it.
Fix this W=1 build warning:
include/sound/tas2781-tlv.h:18:35: warning: 'dvc_tlv' defined but not
used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403290354.v0StnRpc-lkp@intel.com/
Fixes: ae065d0ce9 ("ALSA: hda/tas2781: remove digital gain kcontrol")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <0e461545a2a6e9b6152985143e50526322e5f76b.1711665731.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Skip instead of failing when prerequisite conditions aren't fulfilled,
such as invalid xstate values etc.
Make the tests show as 'SKIP' when run:
make -C tools/testing/selftests/ TARGETS=x86 run_tests
...
# timeout set to 45
# selftests: x86: amx_64
# # xstate cpuid: invalid tile data size/offset: 0/0
ok 42 selftests: x86: amx_64 # SKIP
# timeout set to 45
# selftests: x86: lam_64
# # Unsupported LAM feature!
ok 43 selftests: x86: lam_64 # SKIP
...
In the AMX test, Move away from check_cpuid_xsave() and start using
arch_prctl() to find out if AMX support is present or not. In the
kernels where AMX isn't present, arch_prctl() returns -EINVAL, hence it is
backward compatible.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Chang S. Bae <chang.seok.bae@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240327111720.3509180-1-usama.anjum@collabora.com
When split_lock_detect=off (or similar) is specified in
CONFIG_CMDLINE, its effect is lost. The flow is currently this:
setup_arch():
-> early_cpu_init()
-> early_identify_cpu()
-> sld_setup()
-> sld_state_setup()
-> Looks for split_lock_detect in boot_command_line
-> e820__memory_setup()
-> Assemble final command line:
boot_command_line = builtin_cmdline + boot_cmdline
-> parse_early_param()
There were earlier attempts at fixing this in:
8d48bf8206 ("x86/boot: Pull up cmdline preparation and early param parsing")
later reverted in:
fbe6183998 ("Revert "x86/boot: Pull up cmdline preparation and early param parsing"")
... because parse_early_param() can't be called before
e820__memory_setup().
In this patch, we just move the command line concatenation to the
beginning of early_cpu_init(). This should fix sld_state_setup(), while
not running in the same issues as the earlier attempt.
The order is now:
setup_arch():
-> Assemble final command line:
boot_command_line = builtin_cmdline + boot_cmdline
-> early_cpu_init()
-> early_identify_cpu()
-> sld_setup()
-> sld_state_setup()
-> Looks for split_lock_detect in boot_command_line
-> e820__memory_setup()
-> parse_early_param()
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-kernel@vger.kernel.org
SG_OVERLOADED and SG_OVERUTILIZED flags plus the sg_status bitmask are an
unnecessary complication that only make the code harder to read and slower.
We only ever set them separately:
thule:~/tip> git grep SG_OVER kernel/sched/
kernel/sched/fair.c: set_rd_overutilized_status(rq->rd, SG_OVERUTILIZED);
kernel/sched/fair.c: *sg_status |= SG_OVERLOADED;
kernel/sched/fair.c: *sg_status |= SG_OVERUTILIZED;
kernel/sched/fair.c: *sg_status |= SG_OVERLOADED;
kernel/sched/fair.c: set_rd_overloaded(env->dst_rq->rd, sg_status & SG_OVERLOADED);
kernel/sched/fair.c: sg_status & SG_OVERUTILIZED);
kernel/sched/fair.c: } else if (sg_status & SG_OVERUTILIZED) {
kernel/sched/fair.c: set_rd_overutilized_status(env->dst_rq->rd, SG_OVERUTILIZED);
kernel/sched/sched.h:#define SG_OVERLOADED 0x1 /* More than one runnable task on a CPU. */
kernel/sched/sched.h:#define SG_OVERUTILIZED 0x2 /* One or more CPUs are over-utilized. */
kernel/sched/sched.h: set_rd_overloaded(rq->rd, SG_OVERLOADED);
And use them separately, which results in suboptimal code:
/* update overload indicator if we are at root domain */
set_rd_overloaded(env->dst_rq->rd, sg_status & SG_OVERLOADED);
/* Update over-utilization (tipping point, U >= 0) indicator */
set_rd_overutilized_status(env->dst_rq->rd,
Introduce separate sg_overloaded and sg_overutilized flags in update_sd_lb_stats()
and its lower level functions, and change all of them to 'bool'.
Remove the now unused SG_OVERLOADED and SG_OVERUTILIZED flags.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZgVPhODZ8/nbsqbP@gmail.com
Tony Nguyen says:
====================
ice: use less resources in switchdev
Michal Swiatkowski says:
Switchdev is using one queue per created port representor. This can
quickly lead to Rx queue shortage, as with subfunction support user
can create high number of PRs.
Save one MSI-X and 'number of PRs' * 1 queues.
Refactor switchdev slow-path to use less resources (even no additional
resources). Do this by removing control plane VSI and move its
functionality to PF VSI. Even with current solution PF is acting like
uplink and can't be used simultaneously for other use cases (adding
filters can break slow-path).
In short, do Tx via PF VSI and Rx packets using PF resources. Rx needs
additional code in interrupt handler to choose correct PR netdev.
Previous solution had to queue filters, it was way more elegant but
needed one queue per PRs. Beside that this refactor mostly simplifies
switchdev configuration.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: count representor stats
ice: do switchdev slow-path Rx using PF VSI
ice: change repr::id values
ice: remove switchdev control plane VSI
ice: control default Tx rule in lag
ice: default Tx rule instead of to queue
ice: do Tx through PF netdev in slow-path
ice: remove eswitch changing queues algorithm
====================
Link: https://lore.kernel.org/r/20240325202623.1012287-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the user wants to add an ntuple filter to an RSS context, select
the appropriate VNIC belonging to the selected RSS context and add the
VNIC destination rule.
Make the necessary changes to bnxt_add_ntuple_cls_rule().
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-13-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor bnxt_cfg_rfs_ring_tbl_idx() to pass in the filter structure
pointer instead of the RX ring number. This will allow an ntuple
filter to be set up for the non-default RSS contexts in the next
patch.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-12-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support up to 32 RSS contexts per device if supported by the device.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-11-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new bnxt_modify_rss() function to modify the RSS key and RSS
indirection table. The new function can modify the parameters for
the default context or additional contexts.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify bnxt_rfs_capable() to check that there are enough resources
to support aRFS/ntuple filters for a new RSS context requested by
the user. Existing use cases in the driver will always set the
new parameter to false.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-9-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_rfs_capable() determines the number of VNICs and RSS_CTXs
required to support aRFS and then reserves the resources. We already
have functions bnxt_get_total_vnics() and bnxt_get_total_rss_ctxs()
to do that. Simplify the code by calling these functions. It is
also more correct to do the resource reservation after
bnxt_can_reserve_rings() returns true.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will need to dynamically allocate and change indirection tables
for additional RSS contexts. Add the rss_ctx pointer parameter to
bnxt_alloc_rss_indir_tbl() and bnxt_set_dflt_rss_indir_tbl().
Existing usage will always pass rss_ctx as NULL which means the
default RSS context.
When supporting additional RSS contexts in subsequent patches, we'll
pass the valid rss_ctx to these 2 functions.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add struct bnxt_rss_ctx, related storage lists, required
defines, and its alloc/free functions.
Later patches will use them in order to support multiple
RSS contexts.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current VNIC structures are stored in an array bp->vnic_info[].
The index of the array (vnic_id) is passed to all the functions that
need to reference the VNIC.
This patch changes the scheme to pass the VNIC pointer instead of the
vnic index. Subsequent patches will create additional VNICs that
will not be stored in the bp->vnic_info[] array. Using the VNIC
pointer will work for all the VNICs.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a pure refactoring patch. The new function
bnxt_hwrm_vnic_set_rss_p5() will set up the P5_PLUS specific RSS ring
table and then call bnxt_hwrm_vnic_cfg() to setup the vnic for proper
RSS operations. This new function will be used later for additional
RSS contexts.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240325222902.220712-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use a new default 1 second timeout value instead of the existing
1 msec value. The driver will keep track of the remaining time
before timeout and will pass this value to bnxt_hwrm_port_ts_query().
The firmware supports timeout values up to 65535 usecs. If the
timeout value passed to bnxt_hwrm_port_ts_query() is less than the
FW max value, we will use that value to precisely control the
specified timeout. If it is larger than the FW max value, we will
use the FW max value and any additional retry to reach the desired
timeout will be done in the context of bnxt_ptp_ts_aux_eork().
Link: https://lore.kernel.org/netdev/20240229070202.107488-2-michael.chan@broadcom.com/
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20240325222902.220712-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The caller can pass this new timeout parameter to the function to
specify the firmware timeout value when requesting the TX timestamp
from the firmware. This will allow the caller to precisely control
the timeout and will be used in the next patch. In this patch, the
parameter is 0 which means to use the current default value.
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20240325222902.220712-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using usb-conn-gpio to control USB role and VBUS, the vbus-supply
property must be present in the usb-conn-gpio node. Additionally it
should not be present in the phy node as that isn't what controls vbus
and will upset the use count.
This resolves an issue where VBUS is enabled with OTG in peripheral
mode.
Fixes: ad9a12f7a5 ("arm64: dts: imx8mp-venice: Fix USB connector description")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When using usb-conn-gpio to control USB role and VBUS, the vbus-supply
property must be present in the usb-conn-gpio node. Additionally it
should not be present in the phy node as that isn't what controls vbus
and will upset the use count.
This resolves an issue where VBUS is enabled with OTG in peripheral
mode.
Fixes: ad9a12f7a5 ("arm64: dts: imx8mp-venice: Fix USB connector description")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PDM micphone sound card support, configure the pinmux.
This sound card supports recording sound from PDM micphone
and convert the PDM format data to PCM data.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
AUD2HTX works as the cpu dai in HDMI audio sound card.
This sound card only support playback/output.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The AUD2HTX is a digital module that provides a bridge between
the Audio Subsystem and the HDMI RTX Subsystem. This
module includes intermediate storage to queue SDMA transactions
prior to being synchronized and passed to the HDMI
RTX Subsystem over the Audio Link.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Plus has support for an HDMI transmitter. The
video is genereated by lcdif3, routed to the hdmi parallel
video interface, then fed to a DW HDMI bridge to support
up to 4K video output.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the DT nodes for all the peripherals that make up the
HDMI display pipeline.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The HDMI irqsteer is a secondary interrupt controller within the HDMI
subsystem that maps all HDMI peripheral IRQs into a single upstream
IRQ line.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the PGC and HDMI blk-ctrl nodes providing power control for
HDMI subsystem peripherals.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
