The per-device fault data is a data structure that is used to store
information about faults that occur on a device. This data is allocated
when IOPF is enabled on the device and freed when IOPF is disabled. The
data is used in the paths of iopf reporting, handling, responding, and
draining.
The fault data is protected by two locks:
- dev->iommu->lock: This lock is used to protect the allocation and
freeing of the fault data.
- dev->iommu->fault_parameter->lock: This lock is used to protect the
fault data itself.
Apply the locking mechanism to the fault reporting and responding paths.
The fault_parameter->lock is also added in iopf_queue_discard_partial().
It does not fix any real issue, as iopf_queue_discard_partial() is only
used in the VT-d driver's prq_event_thread(), which is a single-threaded
path that reports the IOPFs.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add CONFIG_IOMMU_IOPF for page fault handling framework and select it
from its real consumer. Move iopf function declaration from iommu-sva.h
to iommu.h and remove iommu-sva.h as it's empty now.
Consolidate all SVA related code into iommu-sva.c:
- Move iommu_sva_domain_alloc() from iommu.c to iommu-sva.c.
- Move sva iopf handling code from io-pgfault.c to iommu-sva.c.
Consolidate iommu_report_device_fault() and iommu_page_response() into
io-pgfault.c.
Export iopf_free_group() and iopf_group_response() for iopf handlers
implemented in modules. Some functions are renamed with more meaningful
names. No other intentional functionality changes.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make iommu_queue_iopf() more generic by making the iopf_group a minimal
set of iopf's that an iopf handler of domain should handle and respond
to. Add domain parameter to struct iopf_group so that the handler can
retrieve and use it directly.
Change iommu_queue_iopf() to forward groups of iopf's to the domain's
iopf handler. This is also a necessary step to decouple the sva iopf
handling code from this interface.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-10-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move iopf_group data structure to iommu.h to make it a minimal set of
faults that a domain's page fault handler should handle.
Add a new function, iopf_free_group(), to free a fault group after all
faults in the group are handled. This function will be made global so
that it can be called from other files, such as iommu-sva.c.
Move iopf_queue data structure to iommu.h to allow the workqueue to be
scheduled out of this file.
This will simplify the sequential patches.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_fault_event and iopf_fault data structures store the same
information about an iopf fault. They are also used in the same way.
Merge these two data structures into a single one to make the code
more concise and easier to maintain.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The individual iommu driver reports the iommu page faults by calling
iommu_report_device_fault(), where a pre-registered device fault handler
is called to route the fault to another fault handler installed on the
corresponding iommu domain.
The pre-registered device fault handler is static and won't be dynamic
as the fault handler is eventually per iommu domain. Replace calling
device fault handler with iommu_queue_iopf().
After this replacement, the registering and unregistering fault handler
interfaces are not needed anywhere. Remove the interfaces and the related
data structures to avoid dead code.
Convert cookie parameter of iommu_queue_iopf() into a device pointer that
is really passed.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct dev_iommu contains two pointers, fault_param and iopf_param.
The fault_param pointer points to a data structure that is used to store
pending faults that are awaiting responses. The iopf_param pointer points
to a data structure that is used to store partial faults that are part of
a Page Request Group.
The fault_param and iopf_param pointers are essentially duplicate. This
causes memory waste. Merge the iopf_device_param pointer into the
iommu_fault_param pointer to consolidate the code and save memory. The
consolidated pointer would be allocated on demand when the device driver
enables the iopf on device, and would be freed after iopf is disabled.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
struct iommu_fault_page_request and struct iommu_page_response are not
part of uAPI anymore. Convert them to data structures for kAPI.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The unrecoverable fault data is not used anywhere. Remove it to avoid
dead code.
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No device driver registers fault handler to handle the reported
unrecoveraable faults. Remove it to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu fault data is currently defined in uapi/linux/iommu.h, but is
only used inside the iommu subsystem. Move it to linux/iommu.h, where it
will be more accessible to kernel drivers.
With this done, uapi/linux/iommu.h becomes empty and can be removed from
the tree.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1].
Here the multiplication is obviously safe because MTK_PROTECT_PA_ALIGN
is defined as a literal value of 256 or 128.
For the "mtk_iommu.c" file: 256
For the "mtk_iommu_v1.c" file: 128
However, using devm_kcalloc() is more appropriate [2] and improves
readability. This patch has no effect on runtime behavior.
Link: https://github.com/KSPP/linux/issues/162 [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [2]
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240211182250.12656-1-erick.archer@gmx.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On many systems that have an AMD IOMMU the following sequence of
warnings is observed during bootup.
```
pci 0000:00:00.2 can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
```
This series of events happens because of the IOMMU initialization
sequence order and the lack of _PRT entries for the IOMMU.
During initialization the IOMMU driver first enables the PCI device
using pci_enable_device(). This will call acpi_pci_irq_enable()
which will check if the interrupt is declared in a PCI routing table
(_PRT) entry. According to the PCI spec [1] these routing entries
are only required under PCI root bridges:
The _PRT object is required under all PCI root bridges
The IOMMU is directly connected to the root complex, so there is no
parent bridge to look for a _PRT entry. The first warning is emitted
since no entry could be found in the hierarchy. The second warning is
then emitted because the interrupt hasn't yet been configured to any
value. The pin was configured in pci_read_irq() but the byte in
PCI_INTERRUPT_LINE return 0xff which means "Unknown".
After that sequence of events pci_enable_msi() is called and this
will allocate an interrupt.
That is both of these warnings are totally harmless because the IOMMU
uses MSI for interrupts. To avoid even trying to probe for a _PRT
entry mark the IOMMU as IRQ managed. This avoids both warnings.
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/06_Device_Configuration/Device_Configuration.html?highlight=_prt#prt-pci-routing-table [1]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Fixes: cffe0a2b5a ("x86, irq: Keep balance of IOAPIC pin reference count")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240122233400.1802-1-mario.limonciello@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This commit fixes the following warning when building virtio_snd driver.
"
*** CID 1583619: Uninitialized variables (UNINIT)
sound/virtio/virtio_kctl.c:294 in virtsnd_kctl_tlv_op()
288
289 break;
290 }
291
292 kfree(tlv);
293
vvv CID 1583619: Uninitialized variables (UNINIT)
vvv Using uninitialized value "rc".
294 return rc;
295 }
296
297 /**
298 * virtsnd_kctl_get_enum_items() - Query items for the ENUMERATED element type.
299 * @snd: VirtIO sound device.
"
This warning is caused by the absence of the "default" branch in the
switch-block, and is a false positive because the kernel calls
virtsnd_kctl_tlv_op() only with values for op_flag processed in
this block.
Also, this commit unifies the cleanup path for all possible control
paths in the callback function.
Signed-off-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>
Signed-off-by: Aiswarya Cyriac <aiswarya.cyriac@opensynergy.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1583619 ("Uninitialized variables")
Fixes: d6568e3de4 ("ALSA: virtio: add support for audio controls")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240216100643.688590-1-aiswarya.cyriac@opensynergy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In modern C versions, 'bool' is a keyword that cannot be used as
a variable name, so change this instance use something else, and
change the type to bool instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240216130211.3828455-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Provide various vector instruction inline assemblies for crc32
calculations.
This is just preparation to keep the conversion of the existing crc32
implementations from assembly to C small.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Provide several one instruction fpu inline assemebles and use them to
implement the bogomips calculation in C like style. This is more for
illustration purposes on how kernel fpu code can be written in C.
This has the advantage that the author only has to take care of the
floating point instructions, but doesn't need to take care of general
purpose register allocation (if needed), and the semantics of all other
instructions not related to fpu.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Move the s390 specific raid6 inline assemblies, make them generic, and
reuse them to implement the raid6 gen/xor implementation.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With csum_partial(), which reads all bytes into registers it is easy to
also implement csum_partial_copy_nocheck() which copies the buffer while
calculating its checksum.
For a 512 byte buffer this reduces the runtime by 19%. Compared to the old
generic variant (memcpy() + cksm instruction) runtime is reduced by 42%).
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Provide a faster variant of csum_partial() which uses vector registers
instead of the cksm instruction.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Convert those callers of csum_partial() to use the cksm instruction,
which are either very early or in critical paths, like panic/dump, so
they don't have to rely on a working kernel infrastructure, which will
be introduced with a subsequent patch.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The first invocation of kernel_fpu_begin() after switching from user to
kernel context will save all vector registers, even if only parts of the
vector registers are used within the kernel fpu context. Given that save
and restore of all vector registers is quite expensive change the current
approach in several ways:
- Instead of saving and restoring all user registers limit this to those
registers which are actually used within an kernel fpu context.
- On context switch save all remaining user fpu registers, so they can be
restored when the task is rescheduled.
- Saving user registers within kernel_fpu_begin() is done without disabling
and enabling interrupts - which also slightly reduces runtime. In worst
case (e.g. interrupt context uses the same registers) this may lead to
the situation that registers are saved several times, however the
assumption is that this will not happen frequently, so that the new
method is faster in nearly all cases.
- save_user_fpu_regs() can still be called from all contexts and saves all
(or all remaining) user registers to a tasks ufpu user fpu save area.
Overall this reduces the time required to save and restore the user fpu
context for nearly all cases.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The kernel_fpu structure has a quite large size of 520 bytes. In order to
reduce stack footprint introduce several kernel fpu structures with
different and also smaller sizes. This way every kernel fpu user must use
the correct variant. A compile time check verifies that the correct variant
is used.
There are several users which use only 16 instead of all 32 vector
registers. For those users the new kernel_fpu_16 structure with a size of
only 266 bytes can be used.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let fpu_vlm() and fpu_vstm() macros return the number of registers saved /
loaded. This is helpful to read easy to read code in case there are several
subsequent fpu_vlm() or fpu_vstm() calls:
__vector128 *vxrs = ....
vxrs += fpu_vstm(0, 15, vxrs);
vxrs += fpu_vstm(16, 31, vxrs);
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The anonymous union within struct fpu contains a floating point register
array and a vector register array. Given that the vector register is always
present remove the floating point register array. For configurations
without vector registers save the floating point register contents within
their corresponding vector register location.
This allows to remove the union, and also to simplify ptrace and perf code.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
KVM was the only user which modified the regs pointer in struct fpu. Remove
the pointer and convert the rest of the core fpu code to directly access
the save area embedded within struct fpu.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
KVM modifies the kernel fpu's regs pointer to its own area to implement its
custom version of preemtible kernel fpu context. With general support for
preemptible kernel fpu context there is no need for the extra complexity in
KVM code anymore.
Therefore convert KVM to a regular kernel fpu user. In particular this
means that all TIF_FPU checks can be removed, since the fpu register
context will never be changed by other kernel fpu users, and also the fpu
register context will be restored if a thread is preempted.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Make the kernel fpu context preemptible. Add another fpu structure to the
thread_struct, and use it to save and restore the kernel fpu context if its
task uses fpu registers when it is preempted.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Change type of fpu mask consistently from u32 to int. This is a
prerequisite to make the kernel fpu usage preemptible. Upcoming code
uses __atomic* ops which work with int pointers.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rename save_fpu_regs(), load_fpu_regs(), and struct thread_struct's fpu
member to save_user_fpu_regs(), load_user_fpu_regs(), and ufpu. This way
the function and variable names reflect for which context they are supposed
to be used.
This large and trivial conversion is a prerequisite for making the kernel
fpu usage preemptible.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The FPU state, as represented by the CIF_FPU flag reflects the FPU state of
a task, not the CPU it is running on. Therefore convert the flag to a
regular TIF flag.
This removes the magic in switch_to() where a save_fpu_regs() call for the
currently (previous) running task sets the per-cpu CIF_FPU flag, which is
required to restore FPU register contents of the next task, when it returns
to user space.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Convert the rather large __kernel_fpu_begin()/__kernel_fpu_end() inline
assemblies to C. The C variant is much more readable, and this also allows
to get rid of the non-obvious usage of KERNEL_VXR_* constants within the
inline assemblies. E.g. "tmll %[m],6" correlates with the two bits set in
KERNEL_VXR_LOW. If the corresponding defines would be changed, the inline
assembles would break in a subtle way.
Therefore convert to C, use the proper defines, and allow the compiler to
generate code using the (hopefully) most efficient instructions.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Instead of open-coding vlm and vstm inline assemblies at several locations,
provide an fpu_* function for each instruction, and use them in the new
save_vx_regs() and load_vx_regs() helper functions.
Note that "O" and "R" inline assembly operand modifiers are used in order
to pass the displacement and base register of the memory operands to the
existing VLM and VSTM macros. The two operand modifiers are not available
for clang. Therefore provide two variants of each inline assembly.
The clang variant always uses and clobbers general purpose register 1, like
in the previous inline assemblies, so it can be used as base register with
a zero displacement. This generates slightly less efficient code, but can
be removed as soon as clang has support for the used operand modifiers.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Instead of open-coding lfpc, sfpc, and stfpc inline assemblies at
several locations, provide an fpu_* function for each instruction and
use the function instead.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Deduplicate the 64 ld and std inline assemblies. Provide an fpu inline
assembly for both instructions, and use them in the new save_fp_regs()
and load_fp_regs() helper functions.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The only user of sfpc_safe() needs to read the new fpc register value
from memory before it is set with sfpc.
Avoid this indirection and use lfpc, which reads the new value from
memory. Also add the "fpu_" prefix to have a common name space for fpu
related inline assemblies, and provide memory access instrumentation.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add documentation which describes what the fpu helper functions are
good for, and why they should be used.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Move, rename, and merge the fpu and vx header files. This way fpu header
files have a consistent naming scheme (fpu*.h).
Also get rid of the fpu subdirectory and move header files to asm
directory, so that all fpu and vx header files can be found at the same
location.
Merge internal.h header file into other header files, since the internal
helpers are used at many locations. so those helper functions are really
not internal.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Address various checkpatch warnings, adjust whitespace, and try to increase
readability. This is just preparation, in order to avoid that subsequent
patches contain any distracting drive-by coding style changes.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use KERNEL_VXR_LOW instead of KERNEL_VXR_V0V7 for configurations without
vector registers in order to decide if floating point registers need to be
saved and restored.
Kernel FPU areas which use floating point registers are supposed to use the
KERNEL_FPR mask, however users may also open-code this and specify
KERNEL_VXR_V0V7 and/or KERNEL_VXR_V8V15. If only KERNEL_VXR_V8V15 is
specified floating point registers wouldn't be saved and restored. Improve
this and check for both bits.
There are currently no users where this would fix a bug.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove the historic machine check handler code which validates registers.
Registers are automatically validated as part of the machine check handling
sequence (see Principles of Operation, Machine-Check Handling chapter,
Validation).
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The v1, v2, v3, and v4 parameters of the RXB macro are a bit misleading,
since the reader can assume that the parameters always correlate with the
instructions format fields V1, V2, V3, and V4 as defined in the Principles
of Operation.
This is not the case for a couple of instructions, therefore improve the
description of the macro.
Suggested by Jens Remus, who also provided the improved description.
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The VLGV macro generates the VLGV instruction and has a vr parameter which
correlates to the V3 vector register field of the instruction (bits 12-15).
Due to its position in the VRS-c instruction format of the VLGV
instruction, this field correlates to the second bit of the RXB byte of the
instruction (see Principles of Operation, Chapter "Vector Overview and
Support Instructions").
Within the VLGV macro the MRXBOPC macro is used to generate the RXB field
of the instruction. The usage of the MRXBOPC macro is incorrect, since the
vector register number is passed as third parameter (which correlates to
the first bit of the RXB byte), while it should be passed as fourth
parameter (second bit of the RXB byte). In result an incorrect instruction
would be generated if the VLGV macro would be used for vector register
numbers larger than 15.
Fix this and pass the vector register number as fourth parameter.
Currently there are no users within the kernel which use the macro in a way
that broken code would be generated.
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch introduces dynamic debug hexdump invocation
possibilities to be able to:
- dump an CCA or EP11 CPRB request as early as possible
when received via ioctl from userspace but after the
ap message has been collected together.
- dump an CCA or EP11 CPRB reply short before it is
transferred via ioctl into userspace.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch introduces two dynamic debug hexdump
invocation possibilities to be able to a) dump an
AP message immediately before it goes into the
firmware queue and b) dump a fresh from the
firmware queue received AP message.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>