Bindings allow a "wake", not "enable", GPIO. Schematics also use WAKE
name for the pin:
sa8155p-adp.dtb: pcie@1c00000: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Fixes: a1c86c6805 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240108131216.53867-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bindings allow a "wake", not "enable", GPIO. Schematics also use WAKE
name for the pin:
sdm845-db845c.dtb: pcie@1c00000: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Fixes: 4a657c264b ("arm64: dts: qcom: db845c: Enable PCIe controllers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240108131216.53867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
clang-16 warns about casting between incompatible function types:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c:161:10: error: cast from 'void (*)(const struct firmware *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
161 | .fini = (void(*)(void *))release_firmware,
This one was done to use the generic shadow_fw_release() function as a
callback for struct nvbios_source. Change it to use the same prototype
as the other five instances, with a trivial helper function that actually
calls release_firmware.
Fixes: 70c0f263cc ("drm/nouveau/bios: pull in basic vbios subdev, more to come later")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213095753.455062-1-arnd@kernel.org
The SPM / SAW2 device also provides a voltage regulator functionality
with optional AVS (Adaptive Voltage Scaling) support. The exact register
sequence and voltage ranges differs from device to device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-5-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move internal SPM driver structures to the driver itself, removing them
from the public API. The CPUidle driver doesn't use them at all.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-4-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SAW2 device can optionally provide a voltage regulator supplying the
CPU core, cluster or L2 cache. Change the boolean 'regulator' property
into a proper regulator description. This breaks schema compatibility
for the sake of properly describing the regulator.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-3-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Define compatible strings for SAW2 units present on MSM8960, IPQ4019
and IPQ8064. There is no need to include SAW version into the compat
string, so just use the SoC and SAW2 kind.
Also add missing L2 SAW2 compatibles for MSM8974 and APQ8084, they
follow the existing CPU SAW2 strings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-2-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Qualcomm SPM / SAW2 device is described in two bindigns files:
arm/msm/qcom,saw2.txt and soc/qcom/qcom,spm.yaml. Merge the former into
the latter, adding detailed device node description. While we are at it,
also rename qcom,spm.yaml to qcom,saw2.yaml to follow the actual
compatible used for these devices.
The regulator property is retained as is. It will be changed in the
later patches.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-1-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Fix direct write error handling to avoid a race between failed IO
completion and the submission path itself which can result in an
invalid file size exposed to the user after the failed IO.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZc9S/AAKCRDdoc3SxdoY
dgilAQDhQeRxzZLXO5lh5LGeqveo88kXuQclCK9VeqnCr0cnHQD/RTXvo464Vf4c
DAuDtLxRA16sj8WlLkUVkvjMKdjYaQ8=
=n1Tp
-----END PGP SIGNATURE-----
Merge tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- Fix direct write error handling to avoid a race between failed IO
completion and the submission path itself which can result in an
invalid file size exposed to the user after the failed IO.
* tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Improve error handling
The VEB (virtual embedded switch) as a switch element can be
connected according datasheet though its uplink to:
- Physical port
- Port Virtualizer (not used directly by i40e driver but can
be present in MFP mode where the physical port is shared
between PFs)
- No uplink (aka floating VEB)
But VEB uplink cannot be connected to another VEB and any attempt
to do so results in:
"i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT"
that indicates "the uplink SEID does not point to valid element".
Remove this logic from the driver code this way:
1) For debugfs only allow to build floating VEB (uplink_seid == 0)
or main VEB (uplink_seid == mac_seid)
2) Do not recurse in i40e_veb_link_event() as no VEB cannot have
sub-VEBs
3) Ditto for i40e_veb_rebuild() + simplify the function as we know
that the VEB for rebuild can be only the main LAN VEB or some
of the floating VEBs
4) In i40e_rebuild() there is no need to check veb->uplink_seid
as the possible ones are 0 and MAC SEID
5) In i40e_vsi_release() do not take into account VEBs whose
uplink is another VEB as this is not possible
6) Remove veb_idx field from i40e_veb as a VEB cannot have
sub-VEBs
Tested using i40e debugfs interface:
1) Initial state
[root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total
[ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@cnb-03 net-next]# echo add relay > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 122.745630] i40e 0000:02:00.0: added relay 162
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total
[ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@cnb-03 net-next]# dmesg -c
[ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total
[ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@cnb-03 net-next]# echo del relay 162 > $CMD
[root@cnb-03 net-next]# dmesg -c
[ 239.260901] i40e 0000:02:00.0: deleting relay 162
[ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@cnb-03 net-next]# echo pfr > $CMD
[root@cnb-03 net-next]# echo dump switch > $CMD
[root@cnb-03 net-next]# dmesg -c
...
[ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total
[ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[ 297.199116] i40e 0000:02:00.0: deleting VSI 394
[ 299.807580] i40e 0000:02:00.0: deleting relay 162
[ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total
[ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Although the i40e supports so-called floating VEB (VEB without
an uplink connection to external network), this support is
broken. This functionality is currently unused (except debugfs)
but it will be used by subsequent series for switchdev mode
slow-path. Fix this by following:
1) Handle correctly floating VEB (VEB with uplink_seid == 0)
in i40e_reconstitute_veb() and look for owner VSI and
create it only for non-floating VEBs and also set bridge
mode only for such VEBs as the floating ones are using
always VEB mode.
2) Handle correctly floating VEB in i40e_veb_release() and
disallow its release when there are some VSIs. This is
different from regular VEB that have owner VSI that is
connected to VEB's uplink after VEB deletion by FW.
3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating
VEBs. For floating VEB use 0 for downlink SEID and 'true'
for 'default_port' parameters as per datasheet.
4) Fix 'add relay' command in i40e_dbg_command_write() to allow
to create floating VEB by 'add relay 0 0' or 'add relay'
Tested using debugfs:
1) Initial state
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 173.701286] i40e 0000:02:00.0: header: 3 reported 3 total
[ 173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@host net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@host net-next]# echo add relay > $CMD
[root@host net-next]# dmesg -c
[ 245.551720] i40e 0000:02:00.0: added relay 162
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 276.984371] i40e 0000:02:00.0: header: 4 reported 4 total
[ 276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@host net-next]# echo add vsi 162 > $CMD
[root@host net-next]# dmesg -c
[ 332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 387.284490] i40e 0000:02:00.0: header: 5 reported 5 total
[ 387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# dmesg -c
[ 428.749297] i40e 0000:02:00.0: deleting relay 162
[ 428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@host net-next]# echo pfr > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 738.056172] i40e 0000:02:00.0: header: 5 reported 5 total
[ 738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[root@host net-next]# echo del vsi 394 > $CMD
[root@host net-next]# echo del relay 162 > $CMD
[root@host net-next]# echo dump switch > $CMD
[root@host net-next]# dmesg -c
[ 1233.081126] i40e 0000:02:00.0: deleting VSI 394
[ 1239.345139] i40e 0000:02:00.0: deleting relay 162
[ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total
[ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add two helpers i40e_(veb|vsi)_get_by_seid() to find corresponding
VEB or VSI by their SEID value and use these helpers to replace
existing open-coded loops.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce i40e_for_each_vsi() and i40e_for_each_veb() helper
macros and use them to iterate relevant arrays.
Replace pattern:
for (i = 0; i < pf->num_alloc_vsi; i++)
by:
i40e_for_each_vsi(pf, i, vsi)
and pattern:
for (i = 0; i < I40E_MAX_VEB; i++)
by
i40e_for_each_veb(pf, i, veb)
These macros also check if array item pf->vsi[i] or pf->veb[i]
are not NULL and skip such items so we can remove redundant
checks from loop bodies.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use existing i40e_find_vsi_by_type() to find a VSI
associated with flow director.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the description for the display panel found on this phone.
Unfortunately the LCDB module on PM6150L isn't yet supported upstream so
we need to use a dummy regulator-fixed in the meantime.
And with this done we can also enable the GPU and set the zap shader
firmware path.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240216-fp4-panel-v3-4-a556e4b79640@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GMU won't probe without GPU being enabled, so we can remove the
disabled status so we don't have to explicitly enable the GMU in all the
devices that enable GPU.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240216-fp4-panel-v3-3-a556e4b79640@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This clock controller has never been used in the DT files merged to the
kernel. According to Sibi, it only worked on the pre-production devices.
For the production devices this functionality has been moved to the
firmware.
Drop the bindings now after dropping the driver itself.
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-2-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This driver has never been used in the DT files merged to the kernel.
According to Sibi, it only worked on the pre-production devices. For the
production devices this functionality has been moved to the firmware.
Drop the driver to remove possible confusion.
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240216-drop-sc7180-mss-v1-1-0a8dc8d71c0c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Like the Samsung Galaxy A3/A5, the Grand Prime/Core Prime uses a
Richtek RT5033 PMIC as battery fuel gauge, charger, flash LED and for some
regulators.
For now, only add the fuel gauge/battery device to the device tree, so we
can check the remaining battery percentage.
The other RT5033 drivers need some more work first before they can be used
properly.
Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
[Raymond: Move to fortuna-common. Use interrupts-extended]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240216124639.24689-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit f04a32b2c5 ("selftests/bpf: Do not use sign-file as testcase")
removed the TEST_CUSTOM_PROGS assignment, and removed it from being used
on TEST_GEN_FILES. Remove two leftovers from that cleanup. Found by
inspection.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexey Gladkov <legion@kernel.org>
Link: https://lore.kernel.org/bpf/20240216-bpf-selftests-custom-progs-v1-1-f7cf281a1fda@suse.com
- Avoid dropping the page refcount twice when freeing an unlinked
page-table subtree.
-----BEGIN PGP SIGNATURE-----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=Coky
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.8, take #2
- Avoid dropping the page refcount twice when freeing an unlinked
page-table subtree.
- Don't source the VFIO Kconfig twice
- Fix protected-mode locking order between kvm and vcpus
-----BEGIN PGP SIGNATURE-----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=wb0z
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.8, take #1
- Don't source the VFIO Kconfig twice
- Fix protected-mode locking order between kvm and vcpus
A collection of device-specific fixes. It became a bit bigger
than wished, but all look reasonably small and safe to apply.
- A few Cirrus Logic CS35L56 and CS42L43 driver fixes
- ASoC SOF fixes and workarounds
- Various ASoC Intel fixes
- Lots of HD-, USB-audio and AMD ACP quirks
-----BEGIN PGP SIGNATURE-----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=PlQh
-----END PGP SIGNATURE-----
Merge tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of device-specific fixes. It became a bit bigger than
wished, but all look reasonably small and safe to apply.
- A few Cirrus Logic CS35L56 and CS42L43 driver fixes
- ASoC SOF fixes and workarounds
- Various ASoC Intel fixes
- Lots of HD-, USB-audio and AMD ACP quirks"
* tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: usb-audio: More relaxed check of MIDI jack names
ALSA: hda/realtek: fix mute/micmute LED For HP mt645
ALSA: hda/realtek: cs35l41: Fix order and duplicates in quirks table
ALSA: hda/realtek: cs35l41: Fix device ID / model name
ALSA: hda/realtek: cs35l41: Add internal speaker support for ASUS UM3402 with missing DSD
ASoC: cs35l56: Workaround for ACPI with broken spk-id-gpios property
ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk
ASoC: SOF: IPC3: fix message bounds on ipc ops
ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
ASoC: q6dsp: fix event handler prototype
ASoC: SOF: Intel: pci-lnl: Change the topology path to intel/sof-ipc4-tplg
ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
ASoC: amd: yc: Fix non-functional mic on Lenovo 82UU
ASoC: rt5645: Add DMI quirk for inverted jack-detect on MeeGoPad T8
ASoC: rt5645: Make LattePanda board DMI match more precise
ASoC: SOF: amd: Fix locking in ACP IRQ handler
ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()
ASoC: Intel: cht_bsw_rt5645: Cleanup codec_name handling
ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards
ASoC: cs35l56: Remove default from IRQ1_CFG register
...
- add missing stubs for functions that are not built with GPIOLIB disabled
-----BEGIN PGP SIGNATURE-----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=73oi
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- add missing stubs for functions that are not built with GPIOLIB
disabled
* tag 'gpio-fixes-for-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: add gpio_device_get_label() stub for !GPIOLIB
gpiolib: add gpio_device_get_base() stub for !GPIOLIB
gpiolib: add gpiod_to_gpio_device() stub for !GPIOLIB
2f34d7337d ("workqueue: Fix queue_work_on() with BH workqueues") added
irq_work usage to workqueue; however, it turns out irq_work is actually
optional and the change breaks build on configuration which doesn't have
CONFIG_IRQ_WORK enabled.
Fix build by making workqueue use irq_work only when CONFIG_SMP and enabling
CONFIG_IRQ_WORK when CONFIG_SMP is set. It's reasonable to argue that it may
be better to just always enable it. However, this still saves a small bit of
memory for tiny UP configs and also the least amount of change, so, for now,
let's keep it conditional.
Verified to do the right thing for x86_64 allnoconfig and defconfig, and
aarch64 allnoconfig, allnoconfig + prink disable (SMP but nothing selects
IRQ_WORK) and a modified aarch64 Kconfig where !SMP and nothing selects
IRQ_WORK.
v2: `depends on SMP` leads to Kconfig warnings when CONFIG_IRQ_WORK is
selected by something else when !CONFIG_SMP. Use `def_bool y if SMP`
instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: 2f34d7337d ("workqueue: Fix queue_work_on() with BH workqueues")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
-----BEGIN PGP SIGNATURE-----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=E5XR
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"One small LSM patch to fix a potential integer overflow in the newly
added lsm_set_self_attr() syscall"
* tag 'lsm-pr-20240215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix integer overflow in lsm_set_self_attr() syscall
Because FRAME_POINTER is defined in lib/Kconfig.debug, the arch Kconfig
should select it.
Add 'select FRAME_POINTER' to MCOUNT. ARCH_WANT_FRAME_POINTERS must
also be selected to avoid the unmet dependency warning.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240215135749.1909812-1-masahiroy@kernel.org
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from vdso_setup().
Fixes: 9a08862a5d ("vDSO for sparc")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nick Alcock <nick.alcock@oracle.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240211052808.22635-1-rdunlap@infradead.org
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from setup_nmi_watchdog().
Fixes: e5553a6d04 ("sparc64: Implement NMI watchdog on capable cpus.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240211052802.22612-1-rdunlap@infradead.org
Now that the driver core can properly handle constant struct bus_type,
move the vio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-sparc-v1-1-4ca7fe8de5f7@marliere.net
sparc has a 'btext' font used for the console which is almost identical
to the shared font_sun8x16, so use it rather than duplicating the data.
They were actually identical until about a decade ago when
commit bcfbeecea1 ("drivers: console: font_: Change a glyph from
"broken bar" to "vertical line"")
which changed the | in the shared font to be a solid
bar rather than a broken bar. That's the only difference.
This was originally spotted by PMD which noticed that PPC does
the same thing with the same data, and they also share a bunch
of functions to manipulate the data.
Tested very lightly with a boot without FS in qemu.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20230807010914.799713-1-linux@treblig.org
An old cleanup went a little too far and causes a warning with clang-16
and higher as it breaks control flow integrity (KCFI) rules:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy_shim.c:64:34: error: cast from 'void (*)(struct brcms_phy *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
64 | brcms_init_timer(physhim->wl, (void (*)(void *))fn,
| ^~~~~~~~~~~~~~~~~~~~
Change this one instance back to passing a void pointer so it can be
used with the timer callback interface.
Fixes: d89a4c8060 ("staging: brcm80211: removed void * from softmac phy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240213100548.457854-1-arnd@kernel.org
cdclk_compute_crawl_and_squash_midpoint() was still assuming
that cd2x divider == 1 (ie. full divider == 2). Remove that
assumption by computing the dividers properly.
We'll also toss in a WARN in case the divider somehow ends
up different between the old and new cdclk configs. That should
never happen given we have div==2 in all the cdclk table entries
for the affected platforms.
If in the future we need a config where the divider also needs
to be changed then we likely need to add an extra step into the
cdclk programming sequence to make sure things stay within
legal limits throughout the process.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207013334.29606-4-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
The definition of a reserved BAR is that EPF drivers should not touch
them.
The definition of only_64bit is that the EPF driver must configure this
BAR as 64-bit. (An EPF driver is not allowed to choose if this BAR should
be configured as 32-bit or 64-bit.)
Thus, it does not make sense to put only_64bit of a BAR that EPF drivers
are not allow to touch.
Drop the only_64bit property from hardware descriptions that are of type
reserved BAR.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240216134524.1142149-3-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The hardware description for BARs is scattered in many different variables
in pci_epc_features. Some of these things are mutually exclusive, so it
can create confusion over which variable that has precedence over another.
Improve the situation by creating a struct pci_epc_bar_desc, and a new
enum pci_epc_bar_type, and convert the endpoint controller drivers to use
this more well defined format.
Additionally, some endpoint controller drivers mark the BAR succeeding a
"64-bit only BAR" as reserved, while some do not. By definition, a 64-bit
BAR uses the succeeding BAR for the upper 32-bits, so an EPF driver cannot
use a BAR succeeding a 64-bit BAR. Ensure that all endpoint controller
drivers are uniform, and actually describe a reserved BAR as reserved.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240216134524.1142149-2-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Now that __num_cores_per_package and __num_threads_per_package are
available, cpuinfo::x86_max_cores and the related math all over the place
can be replaced with the ready to consume data.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.176147806@linutronix.de
As the iommu_report_device_fault() has been converted to auto-respond a
page fault if it fails to enqueue it, there's no need to return a code
in any case. Make it return void.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-17-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iopf_group_response() should return void, as nothing can do anything
with the failure. This implies that ops->page_response() must also return
void; this is consistent with what the drivers do. The failure paths,
which are all integrity validations of the fault, should be WARN_ON'd,
not return codes.
If the iommu core fails to enqueue the fault, it should respond the fault
directly by calling ops->page_response() instead of returning an error
number and relying on the iommu drivers to do so. Consolidate the error
fault handling code in the core.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-16-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Previously, before a group of page faults was passed to the domain's iopf
handler, the last page fault of the group was kept in the list of
iommu_fault_param::faults. In the page fault response path, the group's
last page fault was used to look up the list, and the page faults were
responded to device only if there was a matched fault.
The previous approach seems unnecessarily complex and not performance
friendly. Put the page fault group itself to the outstanding fault list.
It can be removed in the page fault response path or in the
iopf_queue_remove_device() path. The pending list is protected by
iommu_fault_param::lock. To allow checking for the group's presence in
the list using list_empty(), the iopf group should be removed from the
list with list_del_init().
IOMMU_PAGE_RESP_PASID_VALID is set in the code but not used anywhere.
Remove it to make the code clean. IOMMU_PAGE_RESP_PASID_VALID is set
in the response message indicating that the response message includes
a valid PASID value. Actually, we should keep this hardware detail in
the individual driver. When the page fault handling framework in IOMMU
and IOMMUFD subsystems includes a valid PASID in the fault message, the
response message should always contain the same PASID value. Individual
drivers should be responsible for deciding whether to include the PASID
in the messages they provide for the hardware.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-15-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert iopf_queue_remove_device() to return void instead of an error code,
as the return value is never used. This removal helper is designed to be
never-failed, so there's no need for error handling.
Ack all outstanding page requests from the device with the response code of
IOMMU_PAGE_RESP_INVALID, indicating device should not attempt any retry.
Add comments to this helper explaining the steps involved in removing a
device from the iopf queue and disabling its PRI. The individual drivers
are expected to be adjusted accordingly. Here we just define the expected
behaviors of the individual iommu driver from the core's perspective.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-14-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The per-device fault data structure stores information about faults
occurring on a device. Its lifetime spans from IOPF enablement to
disablement. Multiple paths, including IOPF reporting, handling, and
responding, may access it concurrently.
Previously, a mutex protected the fault data from use after free. But
this is not performance friendly due to the critical nature of IOPF
handling paths.
Refine this with a refcount-based approach. The fault data pointer is
obtained within an RCU read region with a refcount. The fault data
pointer is returned for usage only when the pointer is valid and a
refcount is successfully obtained. The fault data is freed with
kfree_rcu(), ensuring data is only freed after all RCU critical regions
complete.
An iopf handling work starts once an iopf group is created. The handling
work continues until iommu_page_response() is called to respond to the
iopf and the iopf group is freed. During this time, the device fault
parameter should always be available. Add a pointer to the device fault
parameter in the iopf_group structure and hold the reference until the
iopf_group is freed.
Make iommu_page_response() static as it is only used in io-pgfault.c.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240212012227.119381-13-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>