commit 535fd4c984 upstream.
When trying to set MCR[2], XON1 is incorrectly accessed instead. And when
writing to the TCR register to configure flow control levels, we are
incorrectly writing to the MSR register. The default value of $00 is then
used for TCR, which means that selectable trigger levels in FCR are used
in place of TCR.
TCR/TLR access requires EFR[4] (enable enhanced functions) and MCR[2]
to be set. EFR[4] is already set in probe().
MCR access requires LCR[7] to be zero.
Since LCR is set to $BF when trying to set MCR[2], XON1 is incorrectly
accessed instead because MCR shares the same address space as XON1.
Since MCR[2] is unmodified and still zero, when writing to TCR we are in
fact writing to MSR because TCR/TLR registers share the same address space
as MSR/SPR.
Fix by first removing useless reconfiguration of EFR[4] (enable enhanced
functions), as it is already enabled in sc16is7xx_probe() since commit
43c51bb573 ("sc16is7xx: make sure device is in suspend once probed").
Now LCR is $00, which means that MCR access is enabled.
Also remove regcache_cache_bypass() calls since we no longer access the
enhanced registers set, and TCR is already declared as volatile (in fact
by declaring MSR as volatile, which shares the same address).
Finally disable access to TCR/TLR registers after modifying them by
clearing MCR[2].
Note: the comment about "... and internal clock div" is wrong and can be
ignored/removed as access to internal clock div registers (DLL/DLH)
is permitted only when LCR[7] is logic 1, not when enhanced features
is enabled. And DLL/DLH access is not needed in sc16is7xx_startup().
Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250731124451.1108864-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cfd956dcb1 upstream.
After hvc_write completes, call hvc_kick also in the case the output
buffer has been drained, to ensure tty_wakeup gets called.
This fixes that functions which wait for a drained buffer got stuck
occasionally.
Cc: stable <stable@kernel.org>
Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1230062
Signed-off-by: Fabian Vogt <fvogt@suse.de>
Link: https://lore.kernel.org/r/2011735.PYKUYFuaPT@fvogt-thinkpad
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1939a9fcb8 upstream.
Occasionally wakes up from suspend with missing input on the internal
keyboard. Setting the quirks appears to fix the issue for this device as
well.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250826142646.13516-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9ddc41cdd upstream.
If a proximity event node is defined so as to specify the wake-up
properties of the touch surface, the proximity event interrupt is
enabled unconditionally. This may result in unwanted interrupts.
Solve this problem by enabling the interrupt only if the event is
mapped to a key or switch code.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aKJxxgEWpNaNcUaW@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e895f8e291 upstream.
When testing softirq based hrtimers on an ARM32 board, with high resolution
mode and NOHZ inactive, softirq based hrtimers fail to expire after being
moved away from an offline CPU:
CPU0 CPU1
hrtimer_start(..., HRTIMER_MODE_SOFT);
cpu_down(CPU1) ...
hrtimers_cpu_dying()
// Migrate timers to CPU0
smp_call_function_single(CPU0, returgger_next_event);
retrigger_next_event()
if (!highres && !nohz)
return;
As retrigger_next_event() is a NOOP when both high resolution timers and
NOHZ are inactive CPU0's hrtimer_cpu_base::softirq_expires_next is not
updated and the migrated softirq timers never expire unless there is a
softirq based hrtimer queued on CPU0 later.
Fix this by removing the hrtimer_hres_active() and tick_nohz_active() check
in retrigger_next_event(), which enforces a full update of the CPU base.
As this is not a fast path the extra cost does not matter.
[ tglx: Massaged change log ]
Fixes: 5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Co-developed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250805081025.54235-1-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9786531399 ]
[BUG]
With 64K page size (aarch64 with 64K page size config) and 4K btrfs
block size, the following workload can easily lead to a corrupted read:
mkfs.btrfs -f -s 4k $dev > /dev/null
mount -o compress $dev $mnt
xfs_io -f -c "pwrite -S 0xff 0 64k" $mnt/base > /dev/null
echo "correct result:"
od -Ad -t x1 $mnt/base
xfs_io -f -c "reflink $mnt/base 32k 0 32k" \
-c "reflink $mnt/base 0 32k 32k" \
-c "pwrite -S 0xff 60k 4k" $mnt/new > /dev/null
echo "incorrect result:"
od -Ad -t x1 $mnt/new
umount $mnt
This shows the following result:
correct result:
0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0065536
incorrect result:
0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0032768 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0061440 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0065536
Notice the zero in the range [32K, 60K), which is incorrect.
[CAUSE]
With extra trace printk, it shows the following events during od:
(some unrelated info removed like CPU and context)
od-3457 btrfs_do_readpage: enter r/i=5/258 folio=0(65536) prev_em_start=0000000000000000
The "r/i" is indicating the root and inode number. In our case the file
"new" is using ino 258 from fs tree (root 5).
Here notice the @prev_em_start pointer is NULL. This means the
btrfs_do_readpage() is called from btrfs_read_folio(), not from
btrfs_readahead().
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=0 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=4096 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=8192 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=12288 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=16384 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=20480 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=24576 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=28672 got em start=0 len=32768
These above 32K blocks will be read from the first half of the
compressed data extent.
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=32768 got em start=32768 len=32768
Note here there is no btrfs_submit_compressed_read() call. Which is
incorrect now.
Although both extent maps at 0 and 32K are pointing to the same compressed
data, their offsets are different thus can not be merged into the same
read.
So this means the compressed data read merge check is doing something
wrong.
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=36864 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=40960 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=45056 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=49152 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=53248 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=57344 got em start=32768 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=61440 skip uptodate
od-3457 btrfs_submit_compressed_read: cb orig_bio: file off=0 len=61440
The function btrfs_submit_compressed_read() is only called at the end of
folio read. The compressed bio will only have an extent map of range [0,
32K), but the original bio passed in is for the whole 64K folio.
This will cause the decompression part to only fill the first 32K,
leaving the rest untouched (aka, filled with zero).
This incorrect compressed read merge leads to the above data corruption.
There were similar problems that happened in the past, commit 808f80b467
("Btrfs: update fix for read corruption of compressed and shared
extents") is doing pretty much the same fix for readahead.
But that's back to 2015, where btrfs still only supports bs (block size)
== ps (page size) cases.
This means btrfs_do_readpage() only needs to handle a folio which
contains exactly one block.
Only btrfs_readahead() can lead to a read covering multiple blocks.
Thus only btrfs_readahead() passes a non-NULL @prev_em_start pointer.
With v5.15 kernel btrfs introduced bs < ps support. This breaks the above
assumption that a folio can only contain one block.
Now btrfs_read_folio() can also read multiple blocks in one go.
But btrfs_read_folio() doesn't pass a @prev_em_start pointer, thus the
existing bio force submission check will never be triggered.
In theory, this can also happen for btrfs with large folios, but since
large folio is still experimental, we don't need to bother it, thus only
bs < ps support is affected for now.
[FIX]
Instead of passing @prev_em_start to do the proper compressed extent
check, introduce one new member, btrfs_bio_ctrl::last_em_start, so that
the existing bio force submission logic will always be triggered.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9e9ff875e4 ]
We recently received a report of poor performance doing sequential
buffered reads of a file with compressed extents. With bs=128k, a naive
sequential dd ran as fast on a compressed file as on an uncompressed
(1.2GB/s on my reproducing system) while with bs<32k, this performance
tanked down to ~300MB/s.
i.e., slow:
dd if=some-compressed-file of=/dev/null bs=4k count=X
vs fast:
dd if=some-compressed-file of=/dev/null bs=128k count=Y
The cause of this slowness is overhead to do with looking up extent_maps
to enable readahead pre-caching on compressed extents
(add_ra_bio_pages()), as well as some overhead in the generic VFS
readahead code we hit more in the slow case. Notably, the main
difference between the two read sizes is that in the large sized request
case, we call btrfs_readahead() relatively rarely while in the smaller
request we call it for every compressed extent. So the fast case stays
in the btrfs readahead loop:
while ((folio = readahead_folio(rac)) != NULL)
btrfs_do_readpage(folio, &em_cached, &bio_ctrl, &prev_em_start);
where the slower one breaks out of that loop every time. This results in
calling add_ra_bio_pages a lot, doing lots of extent_map lookups,
extent_map locking, etc.
This happens because although add_ra_bio_pages() does add the
appropriate un-compressed file pages to the cache, it does not
communicate back to the ractl in any way. To solve this, we should be
using readahead_expand() to signal to readahead to expand the readahead
window.
This change passes the readahead_control into the btrfs_bio_ctrl and in
the case of compressed reads sets the expansion to the size of the
extent_map we already looked up anyway. It skips the subpage case as
that one already doesn't do add_ra_bio_pages().
With this change, whether we use bs=4k or bs=128k, btrfs expands the
readahead window up to the largest compressed extent we have seen so far
(in the trivial example: 128k) and the call stacks of the two modes look
identical. Notably, we barely call add_ra_bio_pages at all. And the
performance becomes identical as well. So this change certainly "fixes"
this performance problem.
Of course, it does seem to beg a few questions:
1. Will this waste too much page cache with a too large ra window?
2. Will this somehow cause bugs prevented by the more thoughtful
checking in add_ra_bio_pages?
3. Should we delete add_ra_bio_pages?
My stabs at some answers:
1. Hard to say. See attempts at generic performance testing below. Is
there a "readahead_shrink" we should be using? Should we expand more
slowly, by half the remaining em size each time?
2. I don't think so. Since the new behavior is indistinguishable from
reading the file with a larger read size passed in, I don't see why
one would be safe but not the other.
3. Probably! I tested that and it was fine in fstests, and it seems like
the pages would get re-used just as well in the readahead case.
However, it is possible some reads that use page cache but not
btrfs_readahead() could suffer. I will investigate this further as a
follow up.
I tested the performance implications of this change in 3 ways (using
compress-force=zstd:3 for compression):
Directly test the affected workload of small sequential reads on a
compressed file (improved from ~250MB/s to ~1.2GB/s)
==========for-next==========
dd /mnt/lol/non-cmpr 4k
1048576+0 records in
1048576+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 6.02983 s, 712 MB/s
dd /mnt/lol/non-cmpr 128k
32768+0 records in
32768+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 5.92403 s, 725 MB/s
dd /mnt/lol/cmpr 4k
1048576+0 records in
1048576+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 17.8832 s, 240 MB/s
dd /mnt/lol/cmpr 128k
32768+0 records in
32768+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 3.71001 s, 1.2 GB/s
==========ra-expand==========
dd /mnt/lol/non-cmpr 4k
1048576+0 records in
1048576+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 6.09001 s, 705 MB/s
dd /mnt/lol/non-cmpr 128k
32768+0 records in
32768+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 6.07664 s, 707 MB/s
dd /mnt/lol/cmpr 4k
1048576+0 records in
1048576+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 3.79531 s, 1.1 GB/s
dd /mnt/lol/cmpr 128k
32768+0 records in
32768+0 records out
4294967296 bytes (4.3 GB, 4.0 GiB) copied, 3.69533 s, 1.2 GB/s
Built the linux kernel from clean (no change)
Ran fsperf. Mostly neutral results with some improvements and
regressions here and there.
Reported-by: Dimitrios Apostolou <jimis@gmx.net>
Link: https://lore.kernel.org/linux-btrfs/34601559-6c16-6ccc-1793-20a97ca0dbba@gmx.net/
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
[ Assert doesn't take a format string ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 21cc2b5c50 ]
When restoring a reservation for an anonymous page, we need to check to
freeing a surplus. However, __unmap_hugepage_range() causes data race
because it reads h->surplus_huge_pages without the protection of
hugetlb_lock.
And adjust_reservation is a boolean variable that indicates whether
reservations for anonymous pages in each folio should be restored.
Therefore, it should be initialized to false for each round of the loop.
However, this variable is not initialized to false except when defining
the current adjust_reservation variable.
This means that once adjust_reservation is set to true even once within
the loop, reservations for anonymous pages will be restored
unconditionally in all subsequent rounds, regardless of the folio's state.
To fix this, we need to add the missing hugetlb_lock, unlock the
page_table_lock earlier so that we don't lock the hugetlb_lock inside the
page_table_lock lock, and initialize adjust_reservation to false on each
round within the loop.
Link: https://lkml.kernel.org/r/20250823182115.1193563-1-aha310510@gmail.com
Fixes: df7a6d1f64 ("mm/hugetlb: restore the reservation if needed")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reported-by: syzbot+417aeb05fd190f3a6da9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=417aeb05fd190f3a6da9
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Page vs folio differences ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6b543ca98 upstream.
When creating a new scheme of DAMON_RECLAIM, the calculation of
'min_age_region' uses 'aggr_interval' as the divisor, which may lead to
division-by-zero errors. Fix it by directly returning -EINVAL when such a
case occurs.
Link: https://lkml.kernel.org/r/20250827115858.1186261-3-yanquanmin1@huawei.com
Fixes: f5a79d7c0c ("mm/damon: introduce struct damos_access_pattern")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3260a3f082 upstream.
state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock.
This allows a use-after-free race:
CPU 0 CPU 1
----- -----
state_show() damon_sysfs_turn_damon_on()
ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock);
damon_destroy_ctx(kdamond->damon_ctx);
kdamond->damon_ctx = NULL;
mutex_unlock(&damon_sysfs_lock);
damon_is_running(ctx); /* ctx is freed */
mutex_lock(&ctx->kdamond_lock); /* UAF */
(The race can also occur with damon_sysfs_kdamonds_rm_dirs() and
damon_sysfs_kdamond_release(), which free or replace the context under
damon_sysfs_lock.)
Fix by taking damon_sysfs_lock before dereferencing the context, mirroring
the locking used in pid_show().
The bug has existed since state_show() first accessed kdamond->damon_ctx.
Link: https://lkml.kernel.org/r/20250905101046.2288-1-disclosure@aisle.com
Fixes: a61ea561c8 ("mm/damon/sysfs: link DAMON for virtual address spaces monitoring")
Signed-off-by: Stanislav Fort <disclosure@aisle.com>
Reported-by: Stanislav Fort <disclosure@aisle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bec324f33d upstream.
When the parent directory's i_rwsem is not locked, req->r_parent may become
stale due to concurrent operations (e.g. rename) between dentry lookup and
message creation. Validate that r_parent matches the encoded parent inode
and update to the correct inode if a mismatch is detected.
[ idryomov: folded a follow-up fix from Alex to drop extra reference
from ceph_get_reply_dir() in ceph_fill_trace():
ceph_get_reply_dir() may return a different, referenced inode when
r_parent is stale and the parent directory lock is not held.
ceph_fill_trace() used that inode but failed to drop the reference
when it differed from req->r_parent, leaking an inode reference.
Keep the directory inode in a local variable and iput() it at
function end if it does not match req->r_parent. ]
Cc: stable@vger.kernel.org
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15f519e9f8 upstream.
Add validation to ensure the cached parent directory inode matches the
directory info in MDS replies. This prevents client-side race conditions
where concurrent operations (e.g. rename) cause r_parent to become stale
between request initiation and reply processing, which could lead to
applying state changes to incorrect directory inodes.
[ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to
move CEPH_CAP_PIN reference when r_parent is updated:
When the parent directory lock is not held, req->r_parent can become
stale and is updated to point to the correct inode. However, the
associated CEPH_CAP_PIN reference was not being adjusted. The
CEPH_CAP_PIN is a reference on an inode that is tracked for
accounting purposes. Moving this pin is important to keep the
accounting balanced. When the pin was not moved from the old parent
to the new one, it created two problems: The reference on the old,
stale parent was never released, causing a reference leak.
A reference for the new parent was never acquired, creating the risk
of a reference underflow later in ceph_mdsc_release_request(). This
patch corrects the logic by releasing the pin from the old parent and
acquiring it for the new parent when r_parent is switched. This
ensures reference accounting stays balanced. ]
Cc: stable@vger.kernel.org
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cdbc9836c7 upstream.
There is a place where generic code in messenger.c is reading and
another place where it is writing to con->v1 union member without
checking that the union member is active (i.e. msgr1 is in use).
On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter,
so such a read is almost guaranteed to return a bogus value instead of
0 when msgr2 is in use. This ends up being fairly benign because the
side effect is just the invalidation of the authorizer and successive
fetching of new tickets.
con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that
it's being written to can cause more serious consequences, but luckily
it's not something that happens often.
Cc: stable@vger.kernel.org
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7094b84863 ]
This attribute is used as a signed number in the code in pm_netlink.c:
nla_put_s32(skb, MPTCP_ATTR_IF_IDX, ssk->sk_bound_dev_if))
The specs should then reflect that. Note that other 'if-idx' attributes
from the same .yaml file use a signed number as well.
Fixes: bc8aeb2045 ("Documentation: netlink: add a YAML spec for mptcp")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250908-net-mptcp-misc-fixes-6-17-rc5-v1-1-5f2168a66079@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9e6dd4c256 ]
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: bc8aeb2045 ("Documentation: netlink: add a YAML spec for mptcp")
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7094b84863 ("netlink: specs: mptcp: fix if-idx attribute type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bea87657b5 ]
The rendered version of the MPTCP events [1] looked strange, because the
whole content of the 'doc' was displayed in the same block.
It was then not clear that the first words, not even ended by a period,
were the attributes that are defined when such events are emitted. These
attributes have now been moved to the end, prefixed by 'Attributes:' and
ended with a period. Note that '>-' has been added after 'doc:' to allow
':' in the text below.
The documentation in the UAPI header has been auto-generated by:
./tools/net/ynl/ynl-regen.sh
Link: https://docs.kernel.org/networking/netlink_spec/mptcp_pm.html#event-type [1]
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-2-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7094b84863 ("netlink: specs: mptcp: fix if-idx attribute type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6b830c6a02 ]
This attribute is added with the 'created' and 'established' events, but
the documentation didn't mention it.
The documentation in the UAPI header has been auto-generated by:
./tools/net/ynl/ynl-regen.sh
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-1-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7094b84863 ("netlink: specs: mptcp: fix if-idx attribute type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b10cb58d7 upstream.
There can be multiple engine info packages in one IB and the first one
may be common engine, not decode/encode.
We need to parse the entire IB instead of stopping after finding first
engine info.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc8f9f0f45)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3318f2d20c upstream.
There is no reason to require this to happen on first submitted IB only.
We need to wait for the queue to be idle, but it can be done at any
time (including when there are multiple video sessions active).
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8908fdce06)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c87fee3c9 upstream.
VRAM+TT bos that are evicted from VRAM to TT may remain in
TT also after a revalidation following eviction or suspend.
This manifests itself as applications becoming sluggish
after buffer objects get evicted or after a resume from
suspend or hibernation.
If the bo supports placement in both VRAM and TT, and
we are on DGFX, mark the TT placement as fallback. This means
that it is tried only after VRAM + eviction.
This flaw has probably been present since the xe module was
upstreamed but use a Fixes: commit below where backporting is
likely to be simple. For earlier versions we need to open-
code the fallback algorithm in the driver.
v2:
- Remove check for dgfx. (Matthew Auld)
- Update the xe_dma_buf kunit test for the new strategy (CI)
- Allow dma-buf to pin in current placement (CI)
- Make xe_bo_validate() for pinned bos a NOP.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5995
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250904160715.2613-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit cb3d7b3b46)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4de37a48b6 upstream.
The for_each_child_of_node() helper drops the reference it takes to each
node as it iterates over children and an explicit of_node_put() is only
needed when exiting the loop early.
Drop the recently introduced bogus additional reference count decrement
at each iteration that could potentially lead to a use-after-free.
Fixes: 1f403699c4 ("drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv")
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250829090345.21075-2-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 711f19dfd7 upstream.
Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters
application".
DAMON's RECLAIM and LRU_SORT modules perform no validation on
user-configured parameters during application, which may lead to
division-by-zero errors.
Avoid the divide-by-zero by adding validation checks when DAMON modules
attempt to apply the parameters.
This patch (of 2):
During the calculation of 'hot_thres' and 'cold_thres', either
'sample_interval' or 'aggr_interval' is used as the divisor, which may
lead to division-by-zero errors. Fix it by directly returning -EINVAL
when such a case occurs. Additionally, since 'aggr_interval' is already
required to be set no smaller than 'sample_interval' in damon_set_attrs(),
only the case where 'sample_interval' is zero needs to be checked.
Link: https://lkml.kernel.org/r/20250827115858.1186261-2-yanquanmin1@huawei.com
Fixes: 40e983cca9 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce652aac9c upstream.
Kernel initializes the "jiffies" timer as 5 minutes below zero, as shown
in include/linux/jiffies.h
/*
* Have the 32 bit jiffies value wrap 5 minutes after boot
* so jiffies wrap bugs show up earlier.
*/
#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
And jiffies comparison help functions cast unsigned value to signed to
cover wraparound
#define time_after_eq(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
((long)((a) - (b)) >= 0))
When quota->charged_from is initialized to 0, time_after_eq() can
incorrectly return FALSE even after reset_interval has elapsed. This
occurs when (jiffies - reset_interval) produces a value with MSB=1, which
is interpreted as negative in signed arithmetic.
This issue primarily affects 32-bit systems because: On 64-bit systems:
MSB=1 values occur after ~292 million years from boot (assuming HZ=1000),
almost impossible.
On 32-bit systems: MSB=1 values occur during the first 5 minutes after
boot, and the second half of every jiffies wraparound cycle, starting from
day 25 (assuming HZ=1000)
When above unexpected FALSE return from time_after_eq() occurs, the
charging window will not reset. The user impact depends on esz value at
that time.
If esz is 0, scheme ignores configured quotas and runs without any limits.
If esz is not 0, scheme stops working once the quota is exhausted. It
remains until the charging window finally resets.
So, change quota->charged_from to jiffies at damos_adjust_quota() when it
is considered as the first charge window. By this change, we can avoid
unexpected FALSE return from time_after_eq()
Link: https://lkml.kernel.org/r/20250822025057.1740854-1-ekffu200098@gmail.com
Fixes: 2b8a248d58 ("mm/damon/schemes: implement size quota for schemes application speed control") # 5.16
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 394bfac1c7 upstream.
Commit 8ee53820ed ("thp: mmu_notifier_test_young") introduced
mmu_notifier_test_young(), but we are passing the wrong address.
In xxx_scan_pmd(), the actual iteration address is "_address" not
"address". We seem to misuse the variable on the very beginning.
Change it to the right one.
[akpm@linux-foundation.org fix whitespace, per everyone]
Link: https://lkml.kernel.org/r/20250822063318.11644-1-richard.weiyang@gmail.com
Fixes: 8ee53820ed ("thp: mmu_notifier_test_young")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e08938c36 upstream.
The FUSE protocol uses struct fuse_write_out to convey the return value of
copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE
interface supports a 64-bit size copies.
Currently the number of bytes copied is silently truncated to 32-bit, which
may result in poor performance or even failure to copy in case of
truncation to zero.
Reported-by: Florian Weimer <fweimer@redhat.com>
Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/
Fixes: 88bc7d5097 ("fuse: add support for copy_file_range()")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5203209b3 upstream.
Just like write(), copy_file_range() should check if the return value is
less or equal to the requested number of bytes.
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Closes: https://lore.kernel.org/all/20250807062425.694-1-luochunsheng@ustc.edu/
Fixes: 88bc7d5097 ("fuse: add support for copy_file_range()")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9c8da670e upstream.
We do not support passthrough operations other than read/write on
regular file, so allowing non-regular backing files makes no sense.
Fixes: efad7153bf ("fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN")
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 811c0da454 upstream.
In case OOB write is requested during a data write, ECC is currently
lost. Avoid this issue by only writing in the free spare area.
This issue has been seen with a YAFFS2 file system.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Fixes: 2cd457f328 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd779eac2d upstream.
Having setup time 0 violates tAR, tCLR of some chips, for instance
TOSHIBA TC58NVG2S3ETAI0 cannot be detected successfully (first ID byte
being read duplicated, i.e. 98 98 dc 90 15 76 14 03 instead of
98 dc 90 15 76 ...).
Atmel Application Notes postulated 1 cycle NRD_SETUP without explanation
[1], but it looks more appropriate to just calculate setup time properly.
[1] Link: https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ApplicationNotes/ApplicationNotes/doc6255.pdf
Cc: stable@vger.kernel.org
Fixes: f9ce2eddf1 ("mtd: nand: atmel: Add ->setup_data_interface() hooks")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5537a46794 upstream.
Drop phylink_{suspend,resume}() from ax88772 PM callbacks.
MDIO bus accesses have their own runtime-PM handling and will try to
wake the device if it is suspended. Such wake attempts must not happen
from PM callbacks while the device PM lock is held. Since phylink
{sus|re}sume may trigger MDIO, it must not be called in PM context.
No extra phylink PM handling is required for this driver:
- .ndo_open/.ndo_stop control the phylink start/stop lifecycle.
- ethtool/phylib entry points run in process context, not PM.
- phylink MAC ops program the MAC on link changes after resume.
Fixes: e0bffe3e68 ("net: asix: ax88772: migrate to phylink")
Reported-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20250908112619.2900723-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6a6c28005 upstream.
There is a race condition between inode eviction and inode caching that
can cause a live struct btrfs_inode to be missing from the root->inodes
xarray. Specifically, there is a window during evict() between the inode
being unhashed and deleted from the xarray. If btrfs_iget() is called
for the same inode in that window, it will be recreated and inserted
into the xarray, but then eviction will delete the new entry, leaving
nothing in the xarray:
Thread 1 Thread 2
---------------------------------------------------------------
evict()
remove_inode_hash()
btrfs_iget_path()
btrfs_iget_locked()
btrfs_read_locked_inode()
btrfs_add_inode_to_root()
destroy_inode()
btrfs_destroy_inode()
btrfs_del_inode_from_root()
__xa_erase
In turn, this can cause issues for subvolume deletion. Specifically, if
an inode is in this lost state, and all other inodes are evicted, then
btrfs_del_inode_from_root() will call btrfs_add_dead_root() prematurely.
If the lost inode has a delayed_node attached to it, then when
btrfs_clean_one_deleted_snapshot() calls btrfs_kill_all_delayed_nodes(),
it will loop forever because the delayed_nodes xarray will never become
empty (unless memory pressure forces the inode out). We saw this
manifest as soft lockups in production.
Fix it by only deleting the xarray entry if it matches the given inode
(using __xa_cmpxchg()).
Fixes: 310b2f5d5a ("btrfs: use an xarray to track open inodes in a root")
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Co-authored-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de134cb54c upstream.
The following workload on a squota enabled fs:
btrfs subvol create mnt/subvol
# ensure subvol extents get accounted
sync
btrfs qgroup create 1/1 mnt
btrfs qgroup assign mnt/subvol 1/1 mnt
btrfs qgroup delete mnt/subvol
# make the cleaner thread run
btrfs filesystem sync mnt
sleep 1
btrfs filesystem sync mnt
btrfs qgroup destroy 1/1 mnt
will fail with EBUSY. The reason is that 1/1 does the quick accounting
when we assign subvol to it, gaining its exclusive usage as excl and
excl_cmpr. But then when we delete subvol, the decrement happens via
record_squota_delta() which does not update excl_cmpr, as squotas does
not make any distinction between compressed and normal extents. Thus,
we increment excl_cmpr but never decrement it, and are unable to delete
1/1. The two possible fixes are to make squota always mirror excl and
excl_cmpr or to make the fast accounting separately track the plain and
cmpr numbers. The latter felt cleaner to me so that is what I opted for.
Fixes: 1e0e9d5771 ("btrfs: add helper for recording simple quota deltas")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 648de37416 upstream.
Users reported a scenario where MPTCP connections that were configured
with SO_KEEPALIVE prior to connect would fail to enable their keepalives
if MTPCP fell back to TCP mode.
After investigating, this affects keepalives for any connection where
sync_socket_options is called on a socket that is in the closed or
listening state. Joins are handled properly. For connects,
sync_socket_options is called when the socket is still in the closed
state. The tcp_set_keepalive() function does not act on sockets that
are closed or listening, hence keepalive is not immediately enabled.
Since the SO_KEEPOPEN flag is absent, it is not enabled later in the
connect sequence via tcp_finish_connect. Setting the keepalive via
sockopt after connect does work, but would not address any subsequently
created flows.
Fortunately, the fix here is straight-forward: set SOCK_KEEPOPEN on the
subflow when calling sync_socket_options.
The fix was valdidated both by using tcpdump to observe keepalive
packets not being sent before the fix, and being sent after the fix. It
was also possible to observe via ss that the keepalive timer was not
enabled on these sockets before the fix, but was enabled afterwards.
Fixes: 1b3e7ede13 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY")
Cc: stable@vger.kernel.org
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/aL8dYfPZrwedCIh9@templeofstupid.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fac212fe4 upstream.
Clang 22 recently added support for defining __SANITIZE__ macros similar
to GCC [1], which causes warnings (or errors with CONFIG_WERROR=y or W=e)
with the existing defines that the kernel creates to emulate this behavior
with existing clang versions.
In file included from <built-in>:3:
In file included from include/linux/compiler_types.h:171:
include/linux/compiler-clang.h:37:9: error: '__SANITIZE_THREAD__' macro redefined [-Werror,-Wmacro-redefined]
37 | #define __SANITIZE_THREAD__
| ^
<built-in>:352:9: note: previous definition is here
352 | #define __SANITIZE_THREAD__ 1
| ^
Refactor compiler-clang.h to only define the sanitizer macros when they
are undefined and adjust the rest of the code to use these macros for
checking if the sanitizers are enabled, clearing up the warnings and
allowing the kernel to easily drop these defines when the minimum
supported version of LLVM for building the kernel becomes 22.0.0 or newer.
Link: https://lkml.kernel.org/r/20250902-clang-update-sanitize-defines-v1-1-cf3702ca3d92@kernel.org
Link: 568c23bbd3 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 199cd9e8d1 upstream.
This reverts commit 14e41b16e8.
This patch breaks the LTP acct02 test, so let's revert and look for a
better solution.
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Harshvardhan Jha <harshvardhan.j.jha@oracle.com>
Link: https://lore.kernel.org/linux-nfs/7d4d57b0-39a3-49f1-8ada-60364743e3b4@sirena.org.uk/
Cc: stable@vger.kernel.org # 6.15.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff2a66d21f upstream.
dma_free_coherent() must only be called if the corresponding
dma_alloc_coherent() call has succeeded. Calling it when the allocation fails
leads to undefined behavior.
Delete the wrong call.
[ bp: Massage commit message. ]
Fixes: 71bcada88b ("edac: altera: Add Altera SDRAM EDAC support")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/aIrfzzqh4IzYtDVC@pc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ce9398aa0 ]
Commit 2ce3d282bd ("proc: fix missing pde_set_flags() for net proc
files") missed a key part in the definition of proc_dir_entry:
union {
const struct proc_ops *proc_ops;
const struct file_operations *proc_dir_ops;
};
So dereference of ->proc_ops assumes it is a proc_ops structure results in
type confusion and make NULL check for 'proc_ops' not work for proc dir.
Add !S_ISDIR(dp->mode) test before calling pde_set_flags() to fix it.
Link: https://lkml.kernel.org/r/20250904135715.3972782-1-wangzijie1@honor.com
Fixes: 2ce3d282bd ("proc: fix missing pde_set_flags() for net proc files")
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reported-by: Brad Spengler <spender@grsecurity.net>
Closes: https://lore.kernel.org/all/20250903065758.3678537-1-wangzijie1@honor.com/
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3967baad4 ]
syzbot reported the splat below. [0]
The repro does the following:
1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes)
2. Attach the prog to a SOCKMAP
3. Add a socket to the SOCKMAP
4. Activate fault injection
5. Send data less than cork_bytes
At 5., the data is carried over to the next sendmsg() as it is
smaller than the cork_bytes specified by bpf_msg_cork_bytes().
Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold
the data, but this fails silently due to fault injection + __GFP_NOWARN.
If the allocation fails, we need to revert the sk->sk_forward_alloc
change done by sk_msg_alloc().
Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate
psock->cork.
The "*copied" also needs to be updated such that a proper error can
be returned to the caller, sendmsg. It fails to allocate psock->cork.
Nothing has been corked so far, so this patch simply sets "*copied"
to 0.
[0]:
WARNING: net/ipv4/af_inet.c:156 at inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156, CPU#1: syz-executor/5983
Modules linked in:
CPU: 1 UID: 0 PID: 5983 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156
Code: 0f 0b 90 e9 62 fe ff ff e8 7a db b5 f7 90 0f 0b 90 e9 95 fe ff ff e8 6c db b5 f7 90 0f 0b 90 e9 bb fe ff ff e8 5e db b5 f7 90 <0f> 0b 90 e9 e1 fe ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 9f fc
RSP: 0018:ffffc90000a08b48 EFLAGS: 00010246
RAX: ffffffff8a09d0b2 RBX: dffffc0000000000 RCX: ffff888024a23c80
RDX: 0000000000000100 RSI: 0000000000000fff RDI: 0000000000000000
RBP: 0000000000000fff R08: ffff88807e07c627 R09: 1ffff1100fc0f8c4
R10: dffffc0000000000 R11: ffffed100fc0f8c5 R12: ffff88807e07c380
R13: dffffc0000000000 R14: ffff88807e07c60c R15: 1ffff1100fc0f872
FS: 00005555604c4500(0000) GS:ffff888125af1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555604df5c8 CR3: 0000000032b06000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__sk_destruct+0x86/0x660 net/core/sock.c:2339
rcu_do_batch kernel/rcu/tree.c:2605 [inline]
rcu_core+0xca8/0x1770 kernel/rcu/tree.c:2861
handle_softirqs+0x286/0x870 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
invoke_softirq kernel/softirq.c:453 [inline]
__irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680
irq_exit_rcu+0x9/0x30 kernel/softirq.c:696
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1052 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1052
</IRQ>
Fixes: 4f738adba3 ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data")
Reported-by: syzbot+4cabd1d2fa917a456db8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68c0b6b5.050a0220.3c6139.0013.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250909232623.4151337-1-kuniyu@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d78b4473c ]
Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can
cause various locking issues; see the following stack trace (edited for
style) as one example:
...
[10.011566] do_raw_spin_lock.cold
[10.011570] try_to_wake_up (5) double-acquiring the same
[10.011575] kick_pool rq_lock, causing a hardlockup
[10.011579] __queue_work
[10.011582] queue_work_on
[10.011585] kernfs_notify
[10.011589] cgroup_file_notify
[10.011593] try_charge_memcg (4) memcg accounting raises an
[10.011597] obj_cgroup_charge_pages MEMCG_MAX event
[10.011599] obj_cgroup_charge_account
[10.011600] __memcg_slab_post_alloc_hook
[10.011603] __kmalloc_node_noprof
...
[10.011611] bpf_map_kmalloc_node
[10.011612] __bpf_async_init
[10.011615] bpf_timer_init (3) BPF calls bpf_timer_init()
[10.011617] bpf_prog_xxxxxxxxxxxxxxxx_fcg_runnable
[10.011619] bpf__sched_ext_ops_runnable
[10.011620] enqueue_task_scx (2) BPF runs with rq_lock held
[10.011622] enqueue_task
[10.011626] ttwu_do_activate
[10.011629] sched_ttwu_pending (1) grabs rq_lock
...
The above was reproduced on bpf-next (b338cf849e) by modifying
./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during
ops.runnable(), and hacking the memcg accounting code a bit to make
a bpf_timer_init() call more likely to raise an MEMCG_MAX event.
We have also run into other similar variants (both internally and on
bpf-next), including double-acquiring cgroup_file_kn_lock, the same
worker_pool::lock, etc.
As suggested by Shakeel, fix this by using __GFP_HIGH instead of
GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg()
raises an MEMCG_MAX event, we call __memcg_memory_event() with
@allow_spinning=false and avoid calling cgroup_file_notify() there.
Depends on mm patch
"memcg: skip cgroup_file_notify if spinning is not allowed":
https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/
v0 approach s/bpf_map_kmalloc_node/bpf_mem_alloc/
https://lore.kernel.org/bpf/20250905061919.439648-1-yepeilin@google.com/
v1 approach:
https://lore.kernel.org/bpf/20250905234547.862249-1-yepeilin@google.com/
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/20250909095222.2121438-1-yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df0cb5cb50 ]
OpenWRT users reported regression on ARMv6 devices after updating to latest
HEAD, where tcpdump filter:
tcpdump "not ether host 3c37121a2b3c and not ether host 184ecbca2a3a \
and not ether host 14130b4d3f47 and not ether host f0f61cf440b7 \
and not ether host a84b4dedf471 and not ether host d022be17e1d7 \
and not ether host 5c497967208b and not ether host 706655784d5b"
fails with warning: "Kernel filter failed: No error information"
when using config:
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_BPF_JIT_DEFAULT_ON=y
The issue arises because commits:
1. "bpf: Fix array bounds error with may_goto" changed default runtime to
__bpf_prog_ret0_warn when jit_requested = 1
2. "bpf: Avoid __bpf_prog_ret0_warn when jit fails" returns error when
jit_requested = 1 but jit fails
This change restores interpreter fallback capability for BPF programs with
stack size <= 512 bytes when jit fails.
Reported-by: Felix Fietkau <nbd@nbd.name>
Closes: https://lore.kernel.org/bpf/2e267b4b-0540-45d8-9310-e127bf95fc63@nbd.name/
Fixes: 6ebc5030e0 ("bpf: Fix array bounds error with may_goto")
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250909144614.2991253-1-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9bb6ffa7f ]
Stanislav reported that in bpf_crypto_crypt() the destination dynptr's
size is not validated to be at least as large as the source dynptr's
size before calling into the crypto backend with 'len = src_len'. This
can result in an OOB write when the destination is smaller than the
source.
Concretely, in mentioned function, psrc and pdst are both linear
buffers fetched from each dynptr:
psrc = __bpf_dynptr_data(src, src_len);
[...]
pdst = __bpf_dynptr_data_rw(dst, dst_len);
[...]
err = decrypt ?
ctx->type->decrypt(ctx->tfm, psrc, pdst, src_len, piv) :
ctx->type->encrypt(ctx->tfm, psrc, pdst, src_len, piv);
The crypto backend expects pdst to be large enough with a src_len length
that can be written. Add an additional src_len > dst_len check and bail
out if it's the case. Note that these kfuncs are accessible under root
privileges only.
Fixes: 3e1c6f3540 ("bpf: make common crypto API for TC/XDP programs")
Reported-by: Stanislav Fort <disclosure@aisle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20250829143657.318524-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce97123324 ]
Deny all sampling event by the CPUMF counter facility device driver
and return -ENOENT. This return value is used to try other PMUs.
Up to now events for type PERF_TYPE_HARDWARE were not tested for
sampling and returned later on -EOPNOTSUPP. This ends the search
for alternative PMUs. Change that behavior and try other PMUs
instead.
Fixes: 613a41b0d1 ("s390/cpum_cf: Reject request for sampling in event initialization")
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
