commit 06d2d478b0 upstream.
The ccs_pll_calculate_vt_tree() function does a search over possible VT
PLL configurations to find the "best" one. If the sensor does not support
odd pre-PLL divisors and the minimum value (with constraints) isn't 1,
other odd values could be errorneously searched (and selected) for the
pre-PLL divisor. Fix this.
Fixes: 415ddd9939 ("media: ccs-pll: Split limits and PLL configuration into front and back parts")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef20527313 upstream.
When setting the sink pad's stream format, set_fmt accidentally changes
the returned format's code to 'outcode', while the purpose is to only
use the 'outcode' for the propagated source stream format.
Fixes: c158d0d4ff ("media: i2c: add DS90UB913 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 910efa6490 upstream.
Currently, if streamon/streamoff calls are imbalanced we can either end up
with a negative ISI m2m usage_count (if streamoff() is called more times
than streamon()) in which case we'll not be able to restart the ISI pipe
next time, or the usage_count never gets to 0 and the pipe is never
switched off.
To avoid that, add a 'streaming' flag to mxc_isi_m2m_ctx_queue_data and use it
in the streamon/streamoff to avoid incrementing/decrementing the usage_count
uselessly, if called multiple times from the same context.
Fixes: cf21f328fc ("media: nxp: Add i.MX8 ISI driver")
Cc: stable@vger.kernel.org
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241023085643.978729-1-laurentiu.palcu@oss.nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b122c9cfcb upstream.
CCI_REG_HNUM should be using CCI_REG16_LE() instead of CCI_REG8()
as HNUM spans from 0x302e[0:7] to 0x302f[0:3].
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Fixes: 8f0926dba7 ("media: imx335: Use V4L2 CCI for accessing sensor registers")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8268da3c47 upstream.
Probe deferral should not be logged as an error:
ov5675 24-0010: failed to get HW configuration: -517
Drop the (mostly) redundant dev_err() from sensor probe() to suppress
it.
Note that errors during clock and regulator lookup are already correctly
logged using dev_err_probe().
Fixes: 49d9ad719e ("media: ov5675: add device-tree support and support runtime PM")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3d86847fb upstream.
Probe deferral should not be logged as an error:
ov8856 24-0010: failed to get HW configuration: -517
Use dev_err_probe() for the clock lookup and drop the (mostly) redundant
dev_err() from sensor probe() to suppress it.
Note that errors during regulator lookup is already correctly logged
using dev_err_probe().
Fixes: 0c2c7a1e0d ("media: ov8856: Add devicetree support")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77a6407c6a upstream.
RTL8723BE found on some ASUSTek laptops, such as F441U and X555UQ with
subsystem ID 11ad:1723 are known to output large amounts of PCIe AER
errors during and after boot up, causing heavy lags and at times lock-ups:
pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
pcieport 0000:00:1c.5: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
pcieport 0000:00:1c.5: [ 0] RxErr
Disable ASPM on this combo as a quirk.
This patch is a revision of a previous patch (linked below) which
attempted to disable ASPM for RTL8723BE on all Intel Skylake and Kaby Lake
PCIe bridges. I take a more conservative approach as all known reports
point to ASUSTek laptops of these two generations with this particular
wireless card.
Please note, however, before the rtl8723be finishes probing, the AER
errors remained. After the module finishes probing, all AER errors would
indeed be eliminated, along with heavy lags, poor network throughput,
and/or occasional lock-ups.
Cc: <stable@vger.kernel.org>
Fixes: a619d1abe2 ("rtlwifi: rtl8723be: Add new driver")
Reported-by: Liangliang Zou <rawdiamondmc@outlook.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218127
Link: https://lore.kernel.org/lkml/05390e0b-27fd-4190-971e-e70a498c8221@lwfinger.net/T/
Tested-by: Liangliang Zou <rawdiamondmc@outlook.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422061755.356535-1-jeffbai@aosc.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 490340fadd upstream.
RTL8811AU stops responding during the firmware download on some systems:
[ 809.256440] rtw_8821au 5-2.1:1.0: Firmware version 42.4.0, H2C version 0
[ 812.759142] rtw_8821au 5-2.1:1.0 wlp48s0f4u2u1: renamed from wlan0
[ 837.315388] rtw_8821au 1-4:1.0: write register 0x1ef4 failed with -110
[ 867.524259] rtw_8821au 1-4:1.0: write register 0x1ef8 failed with -110
[ 868.930976] rtw_8821au 5-2.1:1.0 wlp48s0f4u2u1: entered promiscuous mode
[ 897.730952] rtw_8821au 1-4:1.0: write register 0x1efc failed with -110
Each write takes 30 seconds to fail because that's the timeout currently
used for control messages in rtw_usb_write().
In this scenario the firmware download takes at least 2000 seconds.
Because this is done from the USB probe function, the long delay makes
other things in the system hang.
Reduce the timeout to 500 ms. This is the value used by the official USB
wifi drivers from Realtek.
Of course this only makes things hang for ~30 seconds instead of ~30
minutes. It doesn't fix the firmware download.
Tested with RTL8822CU, RTL8812BU, RTL8811CU, RTL8814AU, RTL8811AU,
RTL8812AU, RTL8821AU, RTL8723DU.
Cc: stable@vger.kernel.org
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Link: https://github.com/lwfinger/rtw88/issues/344
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1e35dd26-3f10-40b1-b2b4-f72184a26611@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ac6fcae5d upstream.
To handle device removal, svc_rdma_accept() requests removal
notification for the underlying device when accepting a connection.
However svc_rdma_free() is not invoked if svc_rdma_accept() fails.
There needs to be a matching "unregister" in that case; otherwise
the device cannot be removed.
Fixes: c4de97f7c4 ("svcrdma: Handle device removal outside of the CM event handler")
Cc: stable@vger.kernel.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af98b0157a upstream.
Since handle->h_transaction may be a NULL pointer, so we should change it
to call is_handle_aborted(handle) first before dereferencing it.
And the following data-race was reported in my fuzzer:
==================================================================
BUG: KCSAN: data-race in jbd2_journal_dirty_metadata / jbd2_journal_dirty_metadata
write to 0xffff888011024104 of 4 bytes by task 10881 on cpu 1:
jbd2_journal_dirty_metadata+0x2a5/0x770 fs/jbd2/transaction.c:1556
__ext4_handle_dirty_metadata+0xe7/0x4b0 fs/ext4/ext4_jbd2.c:358
ext4_do_update_inode fs/ext4/inode.c:5220 [inline]
ext4_mark_iloc_dirty+0x32c/0xd50 fs/ext4/inode.c:5869
__ext4_mark_inode_dirty+0xe1/0x450 fs/ext4/inode.c:6074
ext4_dirty_inode+0x98/0xc0 fs/ext4/inode.c:6103
....
read to 0xffff888011024104 of 4 bytes by task 10880 on cpu 0:
jbd2_journal_dirty_metadata+0xf2/0x770 fs/jbd2/transaction.c:1512
__ext4_handle_dirty_metadata+0xe7/0x4b0 fs/ext4/ext4_jbd2.c:358
ext4_do_update_inode fs/ext4/inode.c:5220 [inline]
ext4_mark_iloc_dirty+0x32c/0xd50 fs/ext4/inode.c:5869
__ext4_mark_inode_dirty+0xe1/0x450 fs/ext4/inode.c:6074
ext4_dirty_inode+0x98/0xc0 fs/ext4/inode.c:6103
....
value changed: 0x00000000 -> 0x00000001
==================================================================
This issue is caused by missing data-race annotation for jh->b_modified.
Therefore, the missing annotation needs to be added.
Reported-by: syzbot+de24c3fe3c4091051710@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=de24c3fe3c4091051710
Fixes: 6e06ae88ed ("jbd2: speedup jbd2_journal_dirty_metadata()")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250514130855.99010-1-aha310510@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b67d2cf14 upstream.
Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes
breaks and the log fills up with errors like:
ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492
ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484
which based on a quick look at the ath11k driver seemed to indicate some
kind of ring-buffer corruption.
Miaoqing Pan tracked it down to the host seeing the updated destination
ring head pointer before the updated descriptor, and the error handling
for that in turn leaves the ring buffer in an inconsistent state.
While this has not yet been observed with ath12k, the ring-buffer
implementation is very similar to the ath11k one and it suffers from the
same bugs.
Add the missing memory barrier to make sure that the descriptor is read
after the head pointer to address the root cause of the corruption while
fixing up the error handling in case there are ever any (ordering) bugs
on the device side.
Note that the READ_ONCE() are only needed to avoid compiler mischief in
case the ring-buffer helpers are ever inlined.
Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # 6.3
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218623
Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com
Cc: Miaoqing Pan <quic_miaoqing@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Link: https://patch.msgid.link/20250321095219.19369-1-johan+linaro@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c10fa44bc upstream.
Sometimes, when a file was read while it was being truncated by
another NFS client, the kernel could deadlock because folio_unlock()
was called twice, and the second call would XOR back the `PG_locked`
flag.
Most of the time (depending on the timing of the truncation), nobody
notices the problem because folio_unlock() gets called three times,
which flips `PG_locked` back off:
1. vfs_read, nfs_read_folio, ... nfs_read_add_folio,
nfs_return_empty_folio
2. vfs_read, nfs_read_folio, ... netfs_read_collection,
netfs_unlock_abandoned_read_pages
3. vfs_read, ... nfs_do_read_folio, nfs_read_add_folio,
nfs_return_empty_folio
The problem is that nfs_read_add_folio() is not supposed to unlock the
folio if fscache is enabled, and a nfs_netfs_folio_unlock() check is
missing in nfs_return_empty_folio().
Rarely this leads to a warning in netfs_read_collection():
------------[ cut here ]------------
R=0000031c: folio 10 is not locked
WARNING: CPU: 0 PID: 29 at fs/netfs/read_collect.c:133 netfs_read_collection+0x7c0/0xf00
[...]
Workqueue: events_unbound netfs_read_collection_worker
RIP: 0010:netfs_read_collection+0x7c0/0xf00
[...]
Call Trace:
<TASK>
netfs_read_collection_worker+0x67/0x80
process_one_work+0x12e/0x2c0
worker_thread+0x295/0x3a0
Most of the time, however, processes just get stuck forever in
folio_wait_bit_common(), waiting for `PG_locked` to disappear, which
never happens because nobody is really holding the folio lock.
Fixes: 000dbe0bec ("NFS: Convert buffered read paths to use netfs when fscache is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d4832ed13 upstream.
fattr4_open_arguments is a v4.2 recommended attribute, so we shouldn't
be sending it to v4.1 servers.
Fixes: cb78f9b7d0 ("nfs: fix the fetch of FATTR4_OPEN_ARGUMENTS")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # 6.11+
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bd2f6b899 upstream.
Engineers at Hammerspace noticed that sometimes mounting with
"xprtsec=tls" hangs for a minute or so, and then times out, even
when the NFS server is reachable and responsive.
kTLS shuts off data_ready callbacks if strp->msg_ready is set to
mitigate data_ready callbacks when a full TLS record is not yet
ready to be read from the socket.
Normally msg_ready is clear when the first TLS record arrives on
a socket. However, I observed that sometimes tls_setsockopt() sets
strp->msg_ready, and that prevents forward progress because
tls_data_ready() becomes a no-op.
Moreover, Jakub says: "If there's a full record queued at the time
when [tlshd] passes the socket back to the kernel, it's up to the
reader to read the already queued data out." So SunRPC cannot
expect a data_ready call when ingress data is already waiting.
Add an explicit poll after SunRPC's upper transport is set up to
pick up any data that arrived after the TLS handshake but before
transport set-up is complete.
Reported-by: Steve Sears <sjs@hammerspace.com>
Suggested-by: Jakub Kacinski <kuba@kernel.org>
Fixes: 75eb6af7ac ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Tested-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b31da62889 upstream.
In nfs4_state_start_net(), laundromat_work may access nfsd_ssc through
nfs4_laundromat -> nfsd4_ssc_expire_umount. If nfsd_ssc isn't initialized,
this can cause NULL pointer dereference.
Normally the delayed start of laundromat_work allows sufficient time for
nfsd_ssc initialization to complete. However, when the kernel waits too
long for userspace responses (e.g. in nfs4_state_start_net ->
nfsd4_end_grace -> nfsd4_record_grace_done -> nfsd4_cld_grace_done ->
cld_pipe_upcall -> __cld_pipe_upcall -> wait_for_completion path), the
delayed work may start before nfsd_ssc initialization finishes.
Fix this by moving nfsd_ssc initialization before starting laundromat_work.
Fixes: f4e44b3933 ("NFSD: delay unmount source's export after inter-server copy completed.")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1244f0b2c3 upstream.
If the request being processed is not a v4 compound request, then
examining the cstate can have undefined results.
This patch adds a check that the rpc procedure being executed
(rq_procinfo) is the NFSPROC4_COMPOUND procedure.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6ca7d2643 upstream.
RFC 7862 states that if an NFS server implements a CLONE operation,
it MUST also implement FATTR4_CLONE_BLKSIZE. NFSD implements CLONE,
but does not implement FATTR4_CLONE_BLKSIZE.
Note that in Section 12.2, RFC 7862 claims that
FATTR4_CLONE_BLKSIZE is RECOMMENDED, not REQUIRED. Likely this is
because a minor version is not permitted to add a REQUIRED
attribute. Confusing.
We assume this attribute reports a block size as a count of bytes,
as RFC 7862 does not specify a unit.
Reported-by: Roland Mainz <roland.mainz@nrubsig.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Cc: stable@vger.kernel.org # v6.7+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7fb730cac upstream.
As of now nfsd calls create_proc_exports_entry() at start of init_nfsd
and cleanup by remove_proc_entry() at last of exit_nfsd.
Which causes kernel OOPs if there is race between below 2 operations:
(i) exportfs -r
(ii) mount -t nfsd none /proc/fs/nfsd
for 5.4 kernel ARM64:
CPU 1:
el1_irq+0xbc/0x180
arch_counter_get_cntvct+0x14/0x18
running_clock+0xc/0x18
preempt_count_add+0x88/0x110
prep_new_page+0xb0/0x220
get_page_from_freelist+0x2d8/0x1778
__alloc_pages_nodemask+0x15c/0xef0
__vmalloc_node_range+0x28c/0x478
__vmalloc_node_flags_caller+0x8c/0xb0
kvmalloc_node+0x88/0xe0
nfsd_init_net+0x6c/0x108 [nfsd]
ops_init+0x44/0x170
register_pernet_operations+0x114/0x270
register_pernet_subsys+0x34/0x50
init_nfsd+0xa8/0x718 [nfsd]
do_one_initcall+0x54/0x2e0
CPU 2 :
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
PC is at : exports_net_open+0x50/0x68 [nfsd]
Call trace:
exports_net_open+0x50/0x68 [nfsd]
exports_proc_open+0x2c/0x38 [nfsd]
proc_reg_open+0xb8/0x198
do_dentry_open+0x1c4/0x418
vfs_open+0x38/0x48
path_openat+0x28c/0xf18
do_filp_open+0x70/0xe8
do_sys_open+0x154/0x248
Sometimes it crashes at exports_net_open() and sometimes cache_seq_next_rcu().
and same is happening on latest 6.14 kernel as well:
[ 0.000000] Linux version 6.14.0-rc5-next-20250304-dirty
...
[ 285.455918] Unable to handle kernel paging request at virtual address 00001f4800001f48
...
[ 285.464902] pc : cache_seq_next_rcu+0x78/0xa4
...
[ 285.469695] Call trace:
[ 285.470083] cache_seq_next_rcu+0x78/0xa4 (P)
[ 285.470488] seq_read+0xe0/0x11c
[ 285.470675] proc_reg_read+0x9c/0xf0
[ 285.470874] vfs_read+0xc4/0x2fc
[ 285.471057] ksys_read+0x6c/0xf4
[ 285.471231] __arm64_sys_read+0x1c/0x28
[ 285.471428] invoke_syscall+0x44/0x100
[ 285.471633] el0_svc_common.constprop.0+0x40/0xe0
[ 285.471870] do_el0_svc_compat+0x1c/0x34
[ 285.472073] el0_svc_compat+0x2c/0x80
[ 285.472265] el0t_32_sync_handler+0x90/0x140
[ 285.472473] el0t_32_sync+0x19c/0x1a0
[ 285.472887] Code: f9400885 93407c23 937d7c27 11000421 (f86378a3)
[ 285.473422] ---[ end trace 0000000000000000 ]---
It reproduced simply with below script:
while [ 1 ]
do
/exportfs -r
done &
while [ 1 ]
do
insmod /nfsd.ko
mount -t nfsd none /proc/fs/nfsd
umount /proc/fs/nfsd
rmmod nfsd
done &
So exporting interfaces to user space shall be done at last and
cleanup at first place.
With change there is no Kernel OOPs.
Co-developed-by: Shubham Rana <s9.rana@samsung.com>
Signed-off-by: Shubham Rana <s9.rana@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff12eb3795 upstream.
With rpc_status netlink support, unregister of register_filesystem()
was missed in case of genl_register_family() fails.
Correcting it by making new label.
Fixes: bd9d6a3efa ("NFSD: add rpc_status netlink support")
Cc: stable@vger.kernel.org
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d037a372f upstream.
Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes
breaks and the log fills up with errors like:
ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492
ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484
which based on a quick look at the driver seemed to indicate some kind
of ring-buffer corruption.
Miaoqing Pan tracked it down to the host seeing the updated destination
ring head pointer before the updated descriptor, and the error handling
for that in turn leaves the ring buffer in an inconsistent state.
Add the missing memory barrier to make sure that the descriptor is read
after the head pointer to address the root cause of the corruption while
fixing up the error handling in case there are ever any (ordering) bugs
on the device side.
Note that the READ_ONCE() are only needed to avoid compiler mischief in
case the ring-buffer helpers are ever inlined.
Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218623
Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com
Cc: Miaoqing Pan <quic_miaoqing@quicinc.com>
Cc: stable@vger.kernel.org # 5.6
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Clayton Craft <clayton@craftyguy.net>
Link: https://patch.msgid.link/20250321094916.19098-1-johan+linaro@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80fe0bc165 upstream.
RTL8811AU stops responding during the firmware download on some systems:
[ 809.256440] rtw_8821au 5-2.1:1.0: Firmware version 42.4.0, H2C version 0
[ 812.759142] rtw_8821au 5-2.1:1.0 wlp48s0f4u2u1: renamed from wlan0
[ 837.315388] rtw_8821au 1-4:1.0: write register 0x1ef4 failed with -110
[ 867.524259] rtw_8821au 1-4:1.0: write register 0x1ef8 failed with -110
[ 868.930976] rtw_8821au 5-2.1:1.0 wlp48s0f4u2u1: entered promiscuous mode
[ 897.730952] rtw_8821au 1-4:1.0: write register 0x1efc failed with -110
Maybe it takes too long when writing the firmware 4 bytes at a time.
Write 196 bytes at a time for RTL8821AU, RTL8811AU, and RTL8812AU,
and 254 bytes at a time for RTL8723DU. These are the sizes used in
their official drivers. Tested with all these chips.
Cc: stable@vger.kernel.org
Link: https://github.com/lwfinger/rtw88/issues/344
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/43f1daad-3ec0-4a3b-a50c-9cd9eb2c2f52@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab52e3e44f upstream.
Add the missing memory barrier to make sure that the REO dest ring
descriptor is read after the head pointer to avoid using stale data on
weakly ordered architectures like aarch64.
This may fix the ring-buffer corruption worked around by commit
f9fff67d2d ("wifi: ath11k: Fix SKB corruption in REO destination
ring") by silently discarding data, and may possibly also address user
reported errors like:
ath11k_pci 0006:01:00.0: msdu_done bit in attention is not set
Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org # 5.6
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218005
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Clayton Craft <clayton@craftyguy.net>
Link: https://patch.msgid.link/20250321145302.4775-1-johan+linaro@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca872e0ad9 upstream.
ensure proper interrupt handling and aligns with the hardware spec by
updating the register offset for MT_WFDMA0_HOST_INT_ENA.
Cc: stable@vger.kernel.org
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250509083512.455095-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da1b9a55ff upstream.
Robert Morris reported:
|If a malicious USB device pretends to be an Intersil p54 wifi
|interface and generates an eeprom_readback message with a large
|eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the
|message beyond the end of priv->eeprom.
|
|static void p54_rx_eeprom_readback(struct p54_common *priv,
| struct sk_buff *skb)
|{
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
| struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data;
|
| if (priv->fw_var >= 0x509) {
| memcpy(priv->eeprom, eeprom->v2.data,
| le16_to_cpu(eeprom->v2.len));
| } else {
| memcpy(priv->eeprom, eeprom->v1.data,
| le16_to_cpu(eeprom->v1.len));
| }
| [...]
The eeprom->v{1,2}.len is set by the driver in p54_download_eeprom().
The device is supposed to provide the same length back to the driver.
But yes, it's possible (like shown in the report) to alter the value
to something that causes a crash/panic due to overrun.
This patch addresses the issue by adding the size to the common device
context, so p54_rx_eeprom_readback no longer relies on possibly tampered
values... That said, it also checks if the "firmware" altered the value
and no longer copies them.
The one, small saving grace is: Before the driver tries to read the eeprom,
it needs to upload >a< firmware. the vendor firmware has a proprietary
license and as a reason, it is not present on most distributions by
default.
Cc: <stable@kernel.org>
Reported-by: Robert Morris <rtm@mit.edu>
Closes: https://lore.kernel.org/linux-wireless/28782.1747258414@localhost/
Fixes: 7cb770729b ("p54: move eeprom code into common library")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20250516184107.47794-1-chunkeey@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6bb8a21cd upstream.
The function mlx5_query_nic_vport_node_guid() calls the function
mlx5_query_nic_vport_context() but does not check its return value.
A proper implementation can be found in mlx5_nic_vport_query_local_lb().
Add error handling for mlx5_query_nic_vport_context(). If it fails, free
the out buffer via kvfree() and return error code.
Fixes: 9efa752545 ("net/mlx5_core: Introduce access functions to query vport RoCE fields")
Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250524163425.1695-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0b50730bd upstream.
The function mlx5_query_nic_vport_qkey_viol_cntr() calls the function
mlx5_query_nic_vport_context() but does not check its return value. This
could lead to undefined behavior if the query fails. A proper
implementation can be found in mlx5_nic_vport_query_local_lb().
Add error handling for mlx5_query_nic_vport_context(). If it fails, free
the out buffer via kvfree() and return error code.
Fixes: 9efa752545 ("net/mlx5_core: Introduce access functions to query vport RoCE fields")
Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250521133620.912-1-vulab@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8ac7336dd upstream.
The enable pin can be configured as always enabled by the hardware. Make
the enable gpio request optional so the driver doesn't fail to probe
when `enable-gpios` property is not present in the device tree.
Cc: stable@vger.kernel.org
Fixes: bfff546aae ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20250420-fix-max20086-v1-2-8cc9ee0d5a08@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71406b6d11 upstream.
>From MAX20086-MAX20089 datasheet, the id for a MAX20086 is 0x30 and not
0x40. With the current code, the driver will fail on probe when the
driver tries to identify the chip id from a MAX20086 device over I2C.
Cc: stable@vger.kernel.org
Fixes: bfff546aae ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20250420-fix-max20086-v1-1-8cc9ee0d5a08@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 774a1fa880 upstream.
Prior changes ensured that when zpci_release_device() is called and it
removed the zdev from the zpci_list this instance can not be found via
the zpci_list anymore even while allowing re-add of reserved devices.
This only accounts for the overall lifetime and zpci_list addition and
removal, it does not yet prevent concurrent add of a new instance for
the same underlying device. Such concurrent add would subsequently cause
issues such as attempted re-use of the same IOMMU sysfs directory and is
generally undesired.
Introduce a new zpci_add_remove_lock mutex to serialize adding a new
device with removal. Together this ensures that if a struct zpci_dev is
not found in the zpci_list it was either already removed and torn down,
or its removal and tear down is in progress with the
zpci_add_remove_lock held.
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b1815a52d upstream.
The architecture assumes that PCI functions can be removed synchronously
as PCI events are processed. This however clashes with the reference
counting of struct pci_dev which allows device drivers to hold on to a
struct pci_dev reference even as the underlying device is removed. To
bridge this gap commit 2a671f77ee ("s390/pci: fix use after free of
zpci_dev") keeps the struct zpci_dev in ZPCI_FN_STATE_RESERVED state
until common code releases the struct pci_dev. Only when all references
are dropped, the struct zpci_dev can be removed and freed.
Later commit a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
moved the deletion of the struct zpci_dev from the zpci_list in
zpci_release_device() to the point where the device is reserved. This
was done to prevent handling events for a device that is already being
removed, e.g. when the platform generates both PCI event codes 0x304
and 0x308. In retrospect, deletion from the zpci_list in the release
function without holding the zpci_list_lock was also racy.
A side effect of this handling is that if the underlying device
re-appears while the struct zpci_dev is in the ZPCI_FN_STATE_RESERVED
state, the new and old instances of the struct zpci_dev and/or struct
pci_dev may clash. For example when trying to create the IOMMU sysfs
files for the new instance. In this case, re-adding the new instance is
aborted. The old instance is removed, and the device will remain absent
until the platform issues another event.
Fix this by allowing the struct zpci_dev to be brought back up right
until it is finally removed. To this end also keep the struct zpci_dev
in the zpci_list until it is finally released when all references have
been dropped.
Deletion from the zpci_list from within the release function is made
safe by using kref_put_lock() with the zpci_list_lock. This ensures that
the releasing code holds the last reference.
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47c3978448 upstream.
As disable_slot() takes a struct zpci_dev from the Configured to the
Standby state. In Standby there is still a hotplug slot so this is not
usually a case of sysfs self deletion. This is important because self
deletion gets very hairy in terms of locking (see for example
recover_store() in arch/s390/pci/pci_sysfs.c).
Because the pci_dev_put() is not within the critical section of the
zdev->state_lock however, disable_slot() can turn into a case of self
deletion if zPCI device event handling slips between the mutex_unlock()
and the pci_dev_put(). If the latter is the last put and
zpci_release_device() is called this then tries to remove the hotplug
slot via zpci_exit_slot() which will try to remove the hotplug slot
directory the disable_slot() is part of i.e. self deletion.
Prevent this by widening the zdev->state_lock critical section to
include the pci_dev_put() which is then guaranteed to happen with the
struct zpci_dev still in Standby state ensuring it will not lead to
a zpci_release_device() call as at least the zPCI event handling code
still holds a reference.
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d76f963329 upstream.
Remove zpci_bus_remove_device() and zpci_disable_device() calls from
zpci_release_device(). These calls were done when the device
transitioned into the ZPCI_FN_STATE_STANDBY state which is guaranteed to
happen before it enters the ZPCI_FN_STATE_RESERVED state. When
zpci_release_device() is called the device is known to be in the
ZPCI_FN_STATE_RESERVED state which is also checked by a WARN_ON().
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cc0eafd28 upstream.
When a system is being suspended to RAM, the PCI devices are also
suspended and the PPC code ends up calling pseries_msi_compose_msg() and
this triggers the BUG_ON() in __pci_read_msi_msg() because the device at
this point is in reduced power state. In reduced power state, the memory
mapped registers of the PCI device are not accessible.
To replicate the bug:
1. Make sure deep sleep is selected
# cat /sys/power/mem_sleep
s2idle [deep]
2. Make sure console is not suspended (so that dmesg logs are visible)
echo N > /sys/module/printk/parameters/console_suspend
3. Suspend the system
echo mem > /sys/power/state
To fix this behaviour, read the cached msi message of the device when the
device is not in PCI_D0 power state instead of touching the hardware.
Fixes: a5f3d2c17b ("powerpc/pseries/pci: Add MSI domains")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250305090237.294633-1-gautam@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 475a8d3037 upstream.
Follow the non-ringed pbuf struct io_buffer_list allocations and account
it against the memcg. There is low chance of that being an actual
problem as ring provided buffer should either pin user memory or
allocate it, which is already accounted.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3985218b50d341273cafff7234e1a7e6d0db9808.1747150490.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b83ba4bc3 upstream.
Initialize current_be_id to 0 in SOF based AMD generic SoundWire machine
driver to handle the unlikely case when there are no devices connected to
a DAI.
In this case create_sdw_dailink() would return without touching the passed
pointer to current_be_id.
Found by gcc -fanalyzer
Cc: stable@vger.kernel.org
Fixes: 6d8348ddc5 ("ASoC: amd: acp: refactor SoundWire machine driver code")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20250506120823.3621604-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 171eb6f71e upstream.
Commit c141ecc3ce ("of: Warn when of_property_read_bool() is used on
non-boolean properties") added a warning when trying to parse a property
with a value (boolean properties are defined as: absent = false, present
without any value = true). This causes a warning from meson-card-utils.
meson-card-utils needs to know about the existence of the
"audio-routing" and/or "audio-widgets" properties in order to properly
parse them. Switch to of_property_present() in order to silence the
following warning messages during boot:
OF: /sound: Read of boolean property 'audio-routing' with a value.
OF: /sound: Read of boolean property 'audio-widgets' with a value.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250419213448.59647-1-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 688abe2860 upstream.
The function sdm845_slim_snd_hw_params() calls the functuion
snd_soc_dai_set_channel_map() but does not check its return
value. A proper implementation can be found in msm_snd_hw_params().
Add error handling for snd_soc_dai_set_channel_map(). If the
function fails and it is not a unsupported error, return the
error code immediately.
Fixes: 5caf64c633 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga")
Cc: stable@vger.kernel.org # v5.6
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519075739.1458-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c4e8b2287 upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
dh895xcc 0000:3f:00.0: qat_hal_clr_reset error
dh895xcc 0000:3f:00.0: Failed to init the AEs
dh895xcc 0000:3f:00.0: Failed to initialise Acceleration Engine
dh895xcc 0000:3f:00.0: Resetting device qat_dev0
dh895xcc 0000:3f:00.0: probe with driver dh895xcc failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 7afa232e76 ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9a6e9279b upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c6xx 0000:3f:00.0: qat_hal_clr_reset error
c6xx 0000:3f:00.0: Failed to init the AEs
c6xx 0000:3f:00.0: Failed to initialise Acceleration Engine
c6xx 0000:3f:00.0: Resetting device qat_dev0
c6xx 0000:3f:00.0: probe with driver c6xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: a6dabee6c8 ("crypto: qat - add support for c62x accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 845bc95202 upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
4xxx 0000:01:00.0: Failed to power up the device
4xxx 0000:01:00.0: Failed to initialize device
4xxx 0000:01:00.0: Resetting device qat_dev0
4xxx 0000:01:00.0: probe with driver 4xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 8c8268166e ("crypto: qat - add qat_4xxx driver")
Link: https://lore.kernel.org/all/Z-DGQrhRj9niR9iZ@gondor.apana.org.au/
Reported-by: Randy Wright <rwright@hpe.com>
Closes: https://issues.redhat.com/browse/RHEL-84366
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 097143f23a upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
420xx 0000:01:00.0: Failed to power up the device
420xx 0000:01:00.0: Failed to initialize device
420xx 0000:01:00.0: Resetting device qat_dev0
420xx 0000:01:00.0: probe with driver 420xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71e0cc1eab upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c3xxx 0000:3f:00.0: qat_hal_clr_reset error
c3xxx 0000:3f:00.0: Failed to init the AEs
c3xxx 0000:3f:00.0: Failed to initialise Acceleration Engine
c3xxx 0000:3f:00.0: Resetting device qat_dev0
c3xxx 0000:3f:00.0: probe with driver c3xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 890c55f4dc ("crypto: qat - add support for c3xxx accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac5ee087d3 upstream.
This patch moves the msleep_interruptible() out of the non-sleepable
context by moving the ls->ls_recover_spin spinlock around so
msleep_interruptible() will be called in a sleepable context.
Cc: stable@vger.kernel.org
Fixes: 4a7727725d ("GFS2: Fix recovery issues for spectators")
Suggested-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0413bcf0fc upstream.
This driver tries to chain requests together before submitting them
to hardware in order to reduce completion interrupts.
However, it even extends chains that have already been submitted
to hardware. This is dangerous because there is no way of knowing
whether the hardware has already read the DMA memory in question
or not.
Fix this by splitting the chain list into two. One for submitted
requests and one for requests that have not yet been submitted.
Only extend the latter.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Fixes: 85030c5168 ("crypto: marvell - Add support for chaining crypto requests in TDMA mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f830edbae2 upstream.
populate_attrs() may override failure for creating attribute files
by success for creating subsequent bin attribute files, and have
wrong return value.
Fix by creating bin attribute files under successfully creating
attribute files.
Fixes: 03607ace80 ("configfs: implement binary attributes")
Cc: stable@vger.kernel.org
Reviewed-by: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250507-fix_configfs-v3-2-fe2d96de8dc4@quicinc.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3159c96ac2 upstream.
When debugfs is disabled, the function has no reference any more:
drivers/thermal/mediatek/lvts_thermal.c:266:13: error: 'lvts_debugfs_exit' defined but not used [-Werror=unused-function]
266 | static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
| ^~~~~~~~~~~~~~~~~
Fixes: ef280c17a840 ("thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250505052502.1812867-1-arnd@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb0851e144 upstream.
Coverity scan reported the usage of "mode->clock * 1000" may lead to
integer overflow. Use "1000ULL" instead of "1000"
when utilizing it to avoid potential integer overflow issue.
Link: https://scan5.scan.coverity.com/#/project-view/10074/10063?selectedIssue=1646759
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Fixes: 1017560164 ("drm/meson: use unsigned long long / Hz for frequency types")
Link: https://lore.kernel.org/r/20250505184338.678540-1-richard120310@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9126d2754c upstream.
When gfs2_sys_fs_add() fails, it sets sb->s_fs_info to NULL on its error
path (see commit 0d515210b6 ("GFS2: Add kobject release method")).
The intention seems to be to prevent dereferencing sb->s_fs_info once
the object pointed to has been deallocated, but that would be better
achieved by setting the pointer to NULL in free_sbd().
As a consequence, when the call to gfs2_sys_fs_add() fails in
gfs2_fill_super(), sdp = GFS2_SB(inode) will evaluate to NULL in iput()
-> gfs2_drop_inode(), and accessing sdp->sd_flags will be a NULL pointer
dereference.
Fix that by only setting sb->s_fs_info to NULL when actually freeing the
object pointed to in free_sbd().
Fixes: ae9f3bd825 ("gfs2: replace sd_aspace with sd_inode")
Reported-by: syzbot+b12826218502df019f9d@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
