This patch is to add asic flag to enable device probe during kfd init.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While gfxoff is enabled, the mmVM_XXX registers will be 0xfffffff while the GFX
is in "off" state. KFD queue creattion doesn't use ring based method, so it will
trigger a VM fault.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds renoir kfd topology which is the same with Raven.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir is the same with Raven, will enable iommu event in future.
v2: fix the checking (Thong)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch inits renoir kfd device info, so we treat renoir as "dgpu"
(bypass iommu v2). Will enable needs_iommu_device till renoir iommu is ready.
v2: rebase and align the drm-next
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir's cache info should be the same with raven and carrizo's.
v2: fix missed "break"
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initial support of Navi14 in KFD. The device IDs will be added later.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no point retrying page faults in VMID0. Those faults are
always fatal.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-and-Tested-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As more and more new asics start to reuse the old device IDs before
launch, there is a need to quickly override the existing asic type
corresponding to the reused device ID through a kernel parameter. With
this, engineers no longer need to rely on local hack patches,
facilitating cooperation across teams.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to check if the nbios funcs exist before
checking the individual pointers.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Update the phylink documentation to make it clear that phylink is
designed to be used on the MAC facing side of the link, rather than
between a SFP and PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support of boot-time switching between 4- and 5-level paging mode is
upstream since 4.17.
We run internal testing with 5-level paging support enabled for a while
and it doesn't not cause any functional or performance regression on
4-level paging hardware.
The only 5-level paging related regressions I saw were in early boot
code that runs independently from CONFIG_X86_5LEVEL.
The next major release of distributions expected to have
CONFIG_X86_5LEVEL=y.
Enable the option by default. It may help to catch obscure bugs early.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: https://lkml.kernel.org/r/20190913095452.40592-1-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Michael Chan says:
====================
bnxt_en: error recovery follow-up patches.
A follow-up patchset for the recently added health and error recovery
feature. The first fix is to prevent .ndo_set_rx_mode() from proceeding
when reset is in progress. The 2nd fix is for the firmware coredump
command. The 3rd and 4th patches update the error recovery process
slightly to add a state that polls and waits for the firmware to be down.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This new state is required when firmware indicates that the error
recovery process requires polling for firmware state to be completely
down before initiating reset. For example, firmware may take some
time to collect the crash dump before it is down and ready to be
reset.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some error recovery updates to the spec., among other minor changes.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Firmware coredump messages take much longer than standard messages,
so increase the timeout accordingly.
Fixes: 6c5657d085 ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check the BNXT_STATE_OPEN flag instead of netif_running() in
bnxt_set_rx_mode(). If the driver is going through any reset, such
as firmware reset or even TX timeout, it may not be ready to set the RX
mode and may crash. The new rx mode settings will be picked up when
the device is opened again later.
Fixes: 230d1f0de7 ("bnxt_en: Handle firmware reset.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of writing "null_blk: " at the beginning of each
pr_err/info/warn log message, format messages using pr_fmt() macro.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the variable nr_devices is an unsigned int, the module_param()
should also use this type. Change the type so they can match.
Fixes: f7c4ce890d ("null_blk: validate the number of devices")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The module load should fail only if there is something wrong with the
configuration or if an error prevents it to work properly. The module
should be able to be loaded with (nr_device == 0), since it will not
trigger errors or be in malfunction state. Preventing loading with zero
devices also breaks applications that configures this module using
configfs API. Remove the nr_device check to fix this.
Fixes: f7c4ce890d ("null_blk: validate the number of devices")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The D-Link DIR-685 had its clock polarity set as active
low using the special SPI "spi-cpol" property.
This is not correct: the datasheet clearly states:
"Fix SCL to GND level when not in use" which is
indicative that this line is active high.
After a recent fix making the GPIO-based SPI driver
force the clock line de-asserted at the beginning of
each SPI transaction this reared its ugly head: now
de-asserted was taken to mean the line should be
driven high, but it should be driven low.
Fix this up in the DTS file and the display works again.
Link: https://lore.kernel.org/r/20190915135444.11066-1-linus.walleij@linaro.org
Cc: Mark Brown <broonie@kernel.org>
Fixes: 2922d1cc16 ("spi: gpio: Add SPI_MASTER_GPIO_SS flag")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Neal Cardwell mentioned that snd_wnd would be useful for diagnosing TCP
performance problems --
> (1) Usually when we're diagnosing TCP performance problems, we do so
> from the sender, since the sender makes most of the
> performance-critical decisions (cwnd, pacing, TSO size, TSQ, etc).
> From the sender-side the thing that would be most useful is to see
> tp->snd_wnd, the receive window that the receiver has advertised to
> the sender.
This serves the purpose of adding an additional __u32 to avoid the
would-be hole caused by the addition of the tcpi_rcvi_ooopack field.
Signed-off-by: Thomas Higdon <tph@fb.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For receive-heavy cases on the server-side, we want to track the
connection quality for individual client IPs. This counter, similar to
the existing system-wide TCPOFOQueue counter in /proc/net/netstat,
tracks out-of-order packet reception. By providing this counter in
TCP_INFO, it will allow understanding to what degree receive-heavy
sockets are experiencing out-of-order delivery and packet drops
indicating congestion.
Please note that this is similar to the counter in NetBSD TCP_INFO, and
has the same name.
Also note that we avoid increasing the size of the tcp_sock struct by
taking advantage of a hole.
Signed-off-by: Thomas Higdon <tph@fb.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MDIO device reset line is optional and now that gpiod_get_optional()
returns proper value when GPIO support is compiled out, there is no
reason to use fwnode_get_named_gpiod() that I plan to hide away.
Let's switch to using more standard gpiod_get_optional() and
gpiod_set_consumer_name() to keep the nice "PHY reset" label.
Also there is no reason to only try to fetch the reset GPIO when we have
OF node, gpiolib can fetch GPIO data from firmwares as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit introduces a new ioctl DM_GET_TARGET_VERSION. It will load a
target that is specified in the "name" entry in the parameter structure
and return its version.
This functionality is intended to be used by cryptsetup, so that it can
query kernel capabilities before activating the device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-09-16
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Now that initial BPF backend for gcc has been merged upstream, enable
BPF kselftest suite for bpf-gcc. Also fix a BE issue with access to
bpf_sysctl.file_pos, from Ilya.
2) Follow-up fix for link-vmlinux.sh to remove bash-specific extensions
related to recent work on exposing BTF info through sysfs, from Andrii.
3) AF_XDP zero copy fixes for i40e and ixgbe driver which caused umem
headroom to be added twice, from Ciara.
4) Refactoring work to convert sock opt tests into test_progs framework
in BPF kselftests, from Stanislav.
5) Fix a general protection fault in dev_map_hash_update_elem(), from Toke.
6) Cleanup to use BPF_PROG_RUN() macro in KCM, from Sami.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a spelling mistake in a literal string, fix it.
Fixes: 89f81008ba ("RDMA/bnxt_re: expose detailed stats retrieved from HW")
Link: https://lore.kernel.org/r/20190911092856.11146-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Here packages the codes of allocating and freeing rq inline buffer in
hns_roce_create_qp_common function in order to reduce the complexity.
Link: https://lore.kernel.org/r/1567068102-56919-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are two modes for mailbox command (cmd) queue, i.e., event mode and
poll mode. For each mode, we use corresponding semaphores to protect the
cmd queue resource competition, so called event_sem and poll_sem. During
cmd init, both semaphores are initialized and poll mode is selected.
Thus, there is no need to up poll_sema again in cmd_use_polling.
Furthermore, there is no need to down the sema of the other side while
switching mode. This patch aims to decouple the switch between event mode
and poll mode of cmd.
Link: https://lore.kernel.org/r/1567068102-56919-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some PCIe controllers can be set to either Host or EP according to some
early boot FW. To make sure there is no discrepancy (e.g. FW configured
the port to EP mode while the DT specifies it as a host bridge or vice
versa), a check has been added for each mode.
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
This driver is DT based and utilizes the DesignWare APIs.
It allows using a smaller ECAM range for a larger bus range -
usually an entire bus uses 1MB of address space, but the driver
can use it for a larger number of buses. This is achieved by using a HW
mechanism which allows changing the BUS part of the "final" outgoing
config transaction. There are 2 HW regs, one which is basically a
bitmask determining which bits to take from the AXI transaction itself
and another which holds the complementary part programmed by the
driver.
All link initializations are handled by the boot FW.
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Remove always false comparisons due to limited range of nfl_bpg_offset
and scale_increment_interval fields.
Warnings detected when compiling with W=1.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911084759.6946-1-benjamin.gaignard@st.com
The Root Port (identified by [1c36:0031]) doesn't support MSI-X. On some
platforms it is configured to not advertise the capability at all, while
on others it (mistakenly) does. This causes a panic during
initialization by the pcieport driver, since it tries to configure the
MSI-X capability. Specifically, when trying to access the MSI-X table
a "non-existing addr" exception occurs.
Example stacktrace snippet:
SError Interrupt on CPU2, code 0xbf000000 -- SError
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33
Hardware name: Annapurna Labs Alpine V3 EVP (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : __pci_enable_msix_range+0x4e4/0x608
lr : __pci_enable_msix_range+0x498/0x608
sp : ffffff80117db700
x29: ffffff80117db700 x28: 0000000000000001
x27: 0000000000000001 x26: 0000000000000000
x25: ffffffd3e9d8c0b0 x24: 0000000000000000
x23: 0000000000000000 x22: 0000000000000000
x21: 0000000000000001 x20: 0000000000000000
x19: ffffffd3e9d8c000 x18: ffffffffffffffff
x17: 0000000000000000 x16: 0000000000000000
x15: ffffff80116496c8 x14: ffffffd3e9844503
x13: ffffffd3e9844502 x12: 0000000000000038
x11: ffffffffffffff00 x10: 0000000000000040
x9 : ffffff801165e270 x8 : ffffff801165e268
x7 : 0000000000000002 x6 : 00000000000000b2
x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000
x3 : 0000000000000000 x2 : 0000000000000000
x1 : 0000000000000000 x0 : ffffffd3e9844680
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33
Hardware name: Annapurna Labs Alpine V3 EVP (DT)
Call trace:
dump_backtrace+0x0/0x140
show_stack+0x14/0x20
dump_stack+0xa8/0xcc
panic+0x140/0x334
nmi_panic+0x6c/0x70
arm64_serror_panic+0x74/0x88
__pte_error+0x0/0x28
el1_error+0x84/0xf8
__pci_enable_msix_range+0x4e4/0x608
pci_alloc_irq_vectors_affinity+0xdc/0x150
pcie_port_device_register+0x2b8/0x4e0
pcie_portdrv_probe+0x34/0xf0
Notice that this quirk also disables MSI (which may work, but hasn't
been tested nor has a current use case), since currently there is no
standard way to disable only MSI-X.
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Fix warnings when W=1.
No code changes, only clean up in sti internal structures and functions
descriptions.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909101254.24191-1-benjamin.gaignard@st.com
In order to better support video non-burst modes,
the +20% on pll out is added only in burst mode.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1568278589-20400-1-git-send-email-yannick.fertre@st.com
The Amazon Annapurna Labs PCIe Root Port exposes the VPD capability,
but there is no actual support for it.
Trying to access the VPD (for example, as part of lspci -vv or when
reading the vpd sysfs file), results in the following warning print:
pcieport 0001:00:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
The Amazon's Annapurna Labs root ports don't advertise an ACS
capability, but they don't allow peer-to-peer transactions and do
validate bus numbers through the SMMU. Additionally, it's not possible
for one RP to pass traffic to another RP.
Signed-off-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Add Amazon's Annapurna Labs vendor ID to pci_ids.h.
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
