There's a helper in drm_fourcc.h these days to check of we're dealing
with a two plane YUV format. Make use if it.
Also s/plane/color_plane/ in skl_plane_relative_data_rate() to reduce
the confusion.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-2-ville.syrjala@linux.intel.com
Rewrite some lines to match line length and replace
format string 0x%x to %#x. Add and remove blank line.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
After recent changes the MSI message data needs to specify the
function-relative IRQ number.
Reported-and-tested-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
osdmap has a bunch of arrays that grow linearly with the number of
OSDs. osd_state, osd_weight and osd_primary_affinity take 4 bytes per
OSD. osd_addr takes 136 bytes per OSD because of sockaddr_storage.
The CRUSH workspace area also grows linearly with the number of OSDs.
Normally these arrays are allocated at client startup. The osdmap is
usually updated in small incrementals, but once in a while a full map
may need to be processed. For a cluster with 10000 OSDs, this means
a bunch of 40K allocations followed by a 1.3M allocation, all of which
are currently required to be physically contiguous. This results in
sporadic ENOMEM errors, hanging the client.
Go back to manually (re)allocating arrays and use ceph_kvmalloc() to
fall back to non-contiguous allocation when necessary.
Link: https://tracker.ceph.com/issues/40481
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The vmalloc allocator doesn't fully respect the specified gfp mask:
while the actual pages are allocated as requested, the page table pages
are always allocated with GFP_KERNEL. ceph_kvmalloc() may be called
with GFP_NOFS and GFP_NOIO (for ceph and rbd respectively), so this may
result in a deadlock.
There is no real reason for the current PAGE_ALLOC_COSTLY_ORDER logic,
it's just something that seemed sensible at the time (ceph_kvmalloc()
predates kvmalloc()). kvmalloc() is smarter: in an attempt to reduce
long term fragmentation, it first tries to kmalloc non-disruptively.
Switch to kvmalloc() and set the respective PF_MEMALLOC_* flag using
the scope API to avoid the deadlock. Note that kvmalloc() needs to be
passed GFP_KERNEL to enable the fallback.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
OSDs are able to perform object copies across different pools. Thus,
there's no need to prevent copy_file_range from doing remote copies if the
source and destination superblocks are different. Only return -EXDEV if
they have different fsid (the cluster ID).
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Move the static keyword to the front of declarations of
snap_handle_length, handle_length and connected_handle_length,
and resolve the following compiler warnings that can be seen
when building with warnings enabled (W=1):
fs/ceph/export.c:38:2: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
fs/ceph/export.c:88:2: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
fs/ceph/export.c:90:2: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Make it more informative: log op_type, offset and length for block
layer requests and initiating obj_req for child requests.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If client mds session is evicted in CEPH_MDS_SESSION_OPENING state,
mds won't send session msg to client, and delayed_work skip
CEPH_MDS_SESSION_OPENING state session, the session hang forever.
Allow ceph_con_keepalive to reconnect a session in OPENING to avoid
session hang. Also, ensure that we skip sessions in RESTARTING and
REJECTED states since those states can't be resurrected by issuing
a keepalive.
Link: https://tracker.ceph.com/issues/41551
Signed-off-by: Erqi Chen chenerqi@gmail.com
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This bit was omitted from a561372405 ("libceph: fix PG split vs OSD
(re)connect race") to avoid backport conflicts.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
release_pages() has been available to modules since Oct, 2010,
when commit 0be8557bcd ("fuse: use release_pages()") added
EXPORT_SYMBOL(release_pages). However, this ceph code was still
using a workaround.
Remove the workaround, and call release_pages() directly.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
rbd_dev_image_id() allocates space for length but passes a smaller
value to rbd_obj_method_sync(). rbd_dev_v2_object_prefix() doesn't
allocate space for length. Fix both to be consistent.
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most filesystems don't limit what security.* xattrs can be set or
fetched. I see no reason that we need to limit that on cephfs either.
Drop the special xattr handler for "security." xattrs, and allow the
"other" xattr handler to handle security xattrs as well.
In addition to fixing xfstest generic/093, this allows us to support
per-file capabilities (a'la setcap(8)).
Link: https://tracker.ceph.com/issues/41135
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
__ceph_getxattr will set the CEPH_I_SEC_INITED flag whenever it gets
any xattr that starts with "security.". We only want to set that flag
when fetching the MAC label for the currently-active LSM, however.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
No need to do an extra jump here. Also add some comments on the endifs.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
xfstest generic/451 intermittently fails. The test does O_DIRECT writes
to a file, and then reads back the result using buffered I/O, while
running a separate set of tasks that are also doing buffered reads.
The client will invalidate the cache prior to a direct write, but it's
easy for one of the other readers' replies to race in and reinstantiate
the invalidated range with stale data.
To fix this, we must to serialize direct I/O writes and buffered reads.
We could just sprinkle in some shared locks on the i_rwsem for reads,
and increase the exclusive footprint on the write side, but that would
cause O_DIRECT writes to end up serialized vs. other direct requests.
Instead, borrow the scheme used by nfs.ko. Buffered writes take the
i_rwsem exclusively, but buffered reads take a shared lock, allowing
them to run in parallel.
O_DIRECT requests also take a shared lock, but we need for them to not
run in parallel with buffered reads. A flag on the ceph_inode_info is
used to indicate whether it's in direct or buffered I/O mode. When a
conflicting request is submitted, it will block until the inode can be
flipped to the necessary mode.
Link: https://tracker.ceph.com/issues/40985
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
osd_req_op_cls_init() and osd_req_op_xattr_init() currently propagate
ceph_pagelist_alloc() ENOMEM errors but ignore ceph_pagelist_append()
memory allocation failures. Add these checks and cleanup on error.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This fixes a build warning to that effect.
Fixes: 1a829ff2a6 ("ceph: no need to check return value of debugfs_create functions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Prevent freezing operations during write page faults. This is good
practice for most filesystems, but especially for ceph since we're
monkeying with the signal table here.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we have Fx caps, and the we're truncating the size to be larger, then
we'll cache the size attribute change, but the mtime won't be updated.
Move the size handling before the mtime, and add ATTR_MTIME to ia_valid
in that case to make sure the mtime also gets updated.
This fixes xfstest generic/313.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It doesn't do anything to invalidate the cache when dropping RD caps.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
cap->session is always non-NULL, so we can just do a single test for
equality w/o testing explicitly for a NULL pointer.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, this function returns ci->i_dirty_caps, but the callers have
to check that that isn't 0 before calling this function. Have the
callers grab that value directly out of the inode, and have
__mark_caps_flushing return the flush_tid instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We actually need the ci->i_ceph_lock here. The necessity of the s_mutex
is less clear. Also add a lockdep assertion for the i_ceph_lock.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's only used to keep count of caps being trimmed, but that requires
that we hold the session->s_mutex to prevent multiple trimming
operations from running concurrently.
We can achieve the same effect using an integer on the stack, which
allows us to (eventually) not need the s_mutex.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's protected by the s_gen_ttl_lock, so we should fetch under it
and ensure that we're using the same generation in both places.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We already mark the mapping in that case, and doing this can cause
false positives to occur at fsync time, as well as spurious read
errors.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Make client use osd reply and session message to infer if itself is
blacklisted. Client reconnect to cluster using new entity addr if it
is blacklisted. Auto reconnect is limited to once every 30 minutes.
Auto reconnect is disabled by default. It can be enabled/disabled by
recover_session=<no|clean> mount option. In 'clean' mode, client drops
any dirty data/metadata, invalidates page caches and invalidates all
writable file handles. After reconnect, file locks become stale because
MDS loses track of them. If an inode contains any stale file locks,
read/write on the indoe are not allowed until applications release all
stale file locks.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
After mds evicts session, file locks get lost sliently. It's not safe to
let programs continue to do read/write.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It closes mds sessions, drop all caps and invalidates page caches,
then use new entity address to reconnect to the cluster.
After reconnect, all dirty data/metadata are dropped, file locks
get lost sliently. Open files continue to work because client will
try renewing caps on later read/write.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Also change several other functions' arguments, no logical changes.
This is preparetion for later patch that checks filp error.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Use errseq_t to track and report errors of async metadata operations,
similar to how kernel handles errors during writeback.
If any dirty caps or any unsafe request gets dropped during session
eviction, record -EIO in corresponding inode's i_meta_err. The error
will be reported by subsequent fsync,
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
CEPH_MDS_SESSION_{RESTARTING,RECONNECTING} are for for mds failover,
they are sub-states of CEPH_MDS_SESSION_OPEN. So __close_session()
should send close request for session in these two state.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This function also re-open connections to OSD/MON, and re-send in-flight
OSD requests after re-opening connections to OSD.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most filesystems that provide virtual xattrs (e.g. CIFS) don't display
them via listxattr(). Ceph does, and that causes some of the tests in
xfstests to fail.
Have cephfs stop listing vxattrs in listxattr. Userspace can always
query them directly when the name is known.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There is no reason to prevent this. The OSD should be able to handle
this as long as the objects are different, and the existing code falls
back when the offset into the object is different.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When filling an inode with info from the MDS, i_blkbits is being
initialized using fl_stripe_unit, which contains the stripe unit in
bytes. Unfortunately, this doesn't make sense for directories as they
have fl_stripe_unit set to '0'. This means that i_blkbits will be set
to 0xff, causing an UBSAN undefined behaviour in i_blocksize():
UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12
shift exponent 255 is too large for 32-bit type 'int'
Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit
is zero.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
"ctx:file_pos sysctl:read write ok" fails on s390 with "Read value !=
nux". This is because verifier rewrites a complete 32-bit
bpf_sysctl.file_pos update to a partial update of the first 32 bits of
64-bit *bpf_sysctl_kern.ppos, which is not correct on big-endian
systems.
Fix by using an offset on big-endian systems.
Ditto for bpf_sysctl.file_pos reads. Currently the test does not detect
a problem there, since it expects to see 0, which it gets with high
probability in error cases, so change it to seek to offset 3 and expect
3 in bpf_sysctl.file_pos.
Fixes: e1550bfe0d ("bpf: Add file_pos field to bpf_sysctl ctx")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190816105300.49035-1-iii@linux.ibm.com/
The i2c_new_dummy() function is deprecated since it returns NULL on
error. Change this to use the recommended replacement
i2c_new_dummy_device() that returns an error code that can be read with
PTR_ERR() and friends.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-5-masneyb@onstation.org
Add support for the 7808 variant. While we're here, the of match table
was missing support for the 7812 and 7818 variants, so add them as well.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-3-masneyb@onstation.org
